1208561Sraj$FreeBSD: releng/10.3/sys/boot/fdt/dts/bindings-gpio.txt 266105 2014-05-15 01:27:53Z loos $ 2208561Sraj 3208561SrajGPIO configuration. 4208561Sraj=================== 5208561Sraj 6208561Sraj1. Properties for GPIO Controllers 7208561Sraj 8208561Sraj1.1 #gpio-cells 9208561Sraj 10208561SrajProperty: #gpio-cells 11208561Sraj 12208561SrajValue type: <u32> 13208561Sraj 14208561SrajDescription: The #gpio-cells property defines the number of cells required 15208561Sraj to encode a gpio specifier. 16208561Sraj 17208561Sraj 18208561Sraj1.2 gpio-controller 19208561Sraj 20208561SrajProperty: gpio-controller 21208561Sraj 22208561SrajValue type: <empty> 23208561Sraj 24208561SrajDescription: The presence of a gpio-controller property defines a node as a 25208561Sraj GPIO controller node. 26208561Sraj 27208561Sraj 28208561Sraj1.3 pin-count 29208561Sraj 30208561SrajProperty: pin-count 31208561Sraj 32208561SrajValue type: <u32> 33208561Sraj 34208561SrajDescription: The pin-count property defines the number of GPIO pins. 35208561Sraj 36208561Sraj 37208561Sraj1.4 Example 38208561Sraj 39208561Sraj GPIO: gpio@10100 { 40208561Sraj #gpio-cells = <3>; 41208561Sraj compatible = "mrvl,gpio"; 42208561Sraj reg = <0x10100 0x20>; 43208561Sraj gpio-controller; 44208561Sraj interrupts = <6 7 8 9>; 45208561Sraj interrupt-parent = <&PIC>; 46208561Sraj pin-count = <50> 47208561Sraj }; 48208561Sraj 49208561Sraj2. Properties for GPIO consumer nodes. 50208561Sraj 51208561Sraj2.1 gpios 52208561Sraj 53208561SrajProperty: gpios 54208561Sraj 55208561SrajValue type: <prop-encoded-array> encoded as arbitrary number of GPIO 56208561Sraj specifiers. 57208561Sraj 58208561SrajDescription: The gpios property of a device node defines the GPIO or GPIOs 59208561Sraj that are used by the device. The value of the gpios property 60208561Sraj consists of an arbitrary number of GPIO specifiers. 61208561Sraj 62208561Sraj The first cell of the GPIO specifier is phandle of the node's 63208561Sraj parent GPIO controller and remaining cells are defined by the 64208561Sraj binding describing the GPIO parent, typically include 65208561Sraj information like pin number, direction and various flags. 66208561Sraj 67208561SrajExample: 68208561Sraj gpios = <&GPIO 0 1 0 /* GPIO[0]: IN, NONE */ 69208561Sraj &GPIO 1 2 0>; /* GPIO[1]: OUT, NONE */ 70208561Sraj 71208561Sraj 72208561Sraj3. "mrvl,gpio" controller GPIO specifier 73208561Sraj 74208561Sraj <phandle pin dir flags> 75208561Sraj 76208561Sraj 77208561Srajpin: 0-MAX GPIO pin number. 78208561Sraj 79208561Srajdir: 80208561Sraj 1 IN Input direction. 81208561Sraj 2 OUT Output direction. 82208561Sraj 83208561Srajflags: 84208561Sraj 0x0000---- IN_NONE 85266105Sloos 0x0001---- IN_POL_LOW Polarity low (active-low). 86208561Sraj 0x0002---- IN_IRQ_EDGE Interrupt, edge triggered. 87208561Sraj 0x0004---- IN_IRQ_LEVEL Interrupt, level triggered. 88208561Sraj 89208561Sraj 0x----0000 OUT_NONE 90208561Sraj 0x----0001 OUT_BLINK Blink on the pin. 91208561Sraj 0x----0002 OUT_OPEN_DRAIN Open drain output line. 92208561Sraj 0x----0004 OUT_OPEN_SRC Open source output line. 93208561Sraj 94208561Sraj 95208561SrajExample: 96208561Sraj gpios = <&GPIO 0 1 0x00000000 /* GPIO[0]: IN */ 97208561Sraj &GPIO 1 2 0x00000000 /* GPIO[1]: OUT */ 98208561Sraj &GPIO 2 1 0x00020000 /* GPIO[2]: IN, IRQ (edge) */ 99208561Sraj &GPIO 3 1 0x00040000 /* GPIO[3]: IN, IRQ (level) */ 100208561Sraj ... 101208561Sraj &GPIO 10 2 0x00000001>; /* GPIO[10]: OUT, blink */ 102