sheevaplug.dts revision 235778
1/* 2 * Copyright (c) 2010 The FreeBSD Foundation 3 * All rights reserved. 4 * 5 * This software was developed by Semihalf under sponsorship from 6 * the FreeBSD Foundation. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * Marvell SheevaPlug Device Tree Source. 30 * 31 * $FreeBSD: head/sys/boot/fdt/dts/sheevaplug.dts 235778 2012-05-22 08:33:14Z gber $ 32 */ 33 34/dts-v1/; 35 36/ { 37 model = "mrvl,SheevaPlug"; 38 compatible = "SheevaPlug"; 39 #address-cells = <1>; 40 #size-cells = <1>; 41 42 aliases { 43 ethernet0 = &enet0; 44 mpp = &MPP; 45 serial0 = &serial0; 46 serial1 = &serial1; 47 soc = &SOC; 48 sram = &SRAM; 49 }; 50 51 cpus { 52 #address-cells = <1>; 53 #size-cells = <0>; 54 55 cpu@0 { 56 device_type = "cpu"; 57 compatible = "ARM,88FR131"; 58 reg = <0x0>; 59 d-cache-line-size = <32>; // 32 bytes 60 i-cache-line-size = <32>; // 32 bytes 61 d-cache-size = <0x4000>; // L1, 16K 62 i-cache-size = <0x4000>; // L1, 16K 63 timebase-frequency = <0>; 64 bus-frequency = <0>; 65 clock-frequency = <0>; 66 }; 67 }; 68 69 memory { 70 device_type = "memory"; 71 reg = <0x0 0x20000000>; // 512M at 0x0 72 }; 73 74 localbus@0 { 75 #address-cells = <2>; 76 #size-cells = <1>; 77 compatible = "mrvl,lbc"; 78 bank-count = <3>; 79 80 /* This reflects CPU decode windows setup. */ 81 ranges = <0x0 0x2f 0xf9300000 0x00100000>; 82 83 nand@0,0 { 84 #address-cells = <1>; 85 #size-cells = <1>; 86 compatible = "mrvl,nfc"; 87 reg = <0x0 0x0 0x00100000>; 88 bank-width = <2>; 89 device-width = <1>; 90 91 slice@0 { 92 reg = <0x0 0x200000>; 93 label = "u-boot"; 94 read-only; 95 }; 96 97 slice@200000 { 98 reg = <0x200000 0x1fe00000>; 99 label = "root"; 100 }; 101 }; 102 }; 103 104 SOC: soc88f6281@f1000000 { 105 #address-cells = <1>; 106 #size-cells = <1>; 107 compatible = "simple-bus"; 108 ranges = <0x0 0xf1000000 0x00100000>; 109 bus-frequency = <0>; 110 111 PIC: pic@20200 { 112 interrupt-controller; 113 #address-cells = <0>; 114 #interrupt-cells = <1>; 115 reg = <0x20200 0x3c>; 116 compatible = "mrvl,pic"; 117 }; 118 119 timer@20300 { 120 compatible = "mrvl,timer"; 121 reg = <0x20300 0x30>; 122 interrupts = <1>; 123 interrupt-parent = <&PIC>; 124 mrvl,has-wdt; 125 }; 126 127 MPP: mpp@10000 { 128 #pin-cells = <2>; 129 compatible = "mrvl,mpp"; 130 reg = <0x10000 0x34>; 131 pin-count = <50>; 132 pin-map = < 133 0 1 /* MPP[0]: NF_IO[2] */ 134 1 1 /* MPP[1]: NF_IO[3] */ 135 2 1 /* MPP[2]: NF_IO[4] */ 136 3 1 /* MPP[3]: NF_IO[5] */ 137 4 1 /* MPP[4]: NF_IO[6] */ 138 5 1 /* MPP[5]: NF_IO[7] */ 139 6 1 /* MPP[6]: SYSRST_OUTn */ 140 8 2 /* MPP[8]: UA0_RTS */ 141 9 2 /* MPP[9]: UA0_CTS */ 142 10 3 /* MPP[10]: UA0_TXD */ 143 11 3 /* MPP[11]: UA0_RXD */ 144 12 1 /* MPP[12]: SD_CLK */ 145 13 1 /* MPP[13]: SD_CMD */ 146 14 1 /* MPP[14]: SD_D[0] */ 147 15 1 /* MPP[15]: SD_D[1] */ 148 16 1 /* MPP[16]: SD_D[2] */ 149 17 1 /* MPP[17]: SD_D[3] */ 150 18 1 /* MPP[18]: NF_IO[0] */ 151 19 1 /* MPP[19]: NF_IO[1] */ 152 29 1 >; /* MPP[29]: TSMP[9] */ 153 }; 154 155 GPIO: gpio@10100 { 156 #gpio-cells = <3>; 157 compatible = "mrvl,gpio"; 158 reg = <0x10100 0x20>; 159 gpio-controller; 160 interrupts = <35 36 37 38 39 40 41>; 161 interrupt-parent = <&PIC>; 162 }; 163 164 rtc@10300 { 165 compatible = "mrvl,rtc"; 166 reg = <0x10300 0x08>; 167 }; 168 169 twsi@11000 { 170 #address-cells = <1>; 171 #size-cells = <0>; 172 compatible = "mrvl,twsi"; 173 reg = <0x11000 0x20>; 174 interrupts = <43>; 175 interrupt-parent = <&PIC>; 176 }; 177 178 enet0: ethernet@72000 { 179 #address-cells = <1>; 180 #size-cells = <1>; 181 model = "V2"; 182 compatible = "mrvl,ge"; 183 reg = <0x72000 0x2000>; 184 ranges = <0x0 0x72000 0x2000>; 185 local-mac-address = [ 00 00 00 00 00 00 ]; 186 interrupts = <12 13 14 11 46>; 187 interrupt-parent = <&PIC>; 188 phy-handle = <&phy0>; 189 190 mdio@0 { 191 #address-cells = <1>; 192 #size-cells = <0>; 193 compatible = "mrvl,mdio"; 194 195 phy0: ethernet-phy@0 { 196 reg = <0x0>; 197 }; 198 }; 199 }; 200 201 serial0: serial@12000 { 202 compatible = "ns16550"; 203 reg = <0x12000 0x20>; 204 reg-shift = <2>; 205 clock-frequency = <0>; 206 interrupts = <33>; 207 interrupt-parent = <&PIC>; 208 }; 209 210 serial1: serial@12100 { 211 compatible = "ns16550"; 212 reg = <0x12100 0x20>; 213 reg-shift = <2>; 214 clock-frequency = <0>; 215 interrupts = <34>; 216 interrupt-parent = <&PIC>; 217 }; 218 219 crypto@30000 { 220 compatible = "mrvl,cesa"; 221 reg = <0x30000 0x10000>; 222 interrupts = <22>; 223 interrupt-parent = <&PIC>; 224 225 sram-handle = <&SRAM>; 226 }; 227 228 usb@50000 { 229 compatible = "mrvl,usb-ehci", "usb-ehci"; 230 reg = <0x50000 0x1000>; 231 interrupts = <48 19>; 232 interrupt-parent = <&PIC>; 233 }; 234 235 xor@60000 { 236 compatible = "mrvl,xor"; 237 reg = <0x60000 0x1000>; 238 interrupts = <5 6 7 8>; 239 interrupt-parent = <&PIC>; 240 }; 241 }; 242 243 SRAM: sram@fd000000 { 244 compatible = "mrvl,cesa-sram"; 245 reg = <0xfd000000 0x00100000>; 246 }; 247 248 chosen { 249 stdin = "serial0"; 250 stdout = "serial0"; 251 }; 252}; 253