make.conf revision 74146
1# $FreeBSD: head/share/examples/etc/make.conf 74146 2001-03-12 07:47:09Z kris $ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 8# It allows you to override macro definitions to make without changing 9# your source tree, or anything the source tree installs. 10# 11# This file must be in valid Makefile syntax. 12# 13# You have to find the things you can put here in the Makefiles and 14# documentation of the source tree. 15# 16# 17# The CPUTYPE variable controls which processor should be targetted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognised: 24# Intel x86 architecture: 25# (AMD CPUs) k7 k6-2 k6 k5 26# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 27# Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4 28# Intel ia64 architecture: itanium 29# 30#CPUTYPE=i686 31#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 32#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 33# 34# CFLAGS controls the compiler settings used when compiling C code. 35# Note that optimization settings above -O (-O2, ...) are not recommended 36# or supported for compiling the world or the kernel - please revert any 37# nonstandard optimization settings to "-O" before submitting bug reports 38# to the developers. 39# Note also that at this time the -O2 setting is known to produce BROKEN 40# CODE on the Alpha platform. 41# 42#CFLAGS= -O -pipe 43# 44# CXXFLAGS controls the compiler settings used when compiling C++ code. 45# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 46# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 47# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 48# 49#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 50# 51# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 52# for use in developing FreeBSD and testing changes. They can be used by 53# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. 54# 55BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 56 -Wcast-qual -Wchar-subscripts -Wconversion -Winline \ 57 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 58 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 59# 60# To compile just the kernel with special optimizations, you should use 61# this instead of CFLAGS (which is not applicable to kernel builds anyway). 62# There is very little to gain by using higher optimization levels, and doing 63# so can cause problems. 64# 65#COPTFLAGS= -O -pipe 66# 67# Compare before install 68#INSTALL=install -C 69# 70# Mtree will follow symlinks 71#MTREE_FOLLOWS_SYMLINKS= -L 72# 73# To enable installing suidperl with the setuid bit turned on 74#ENABLE_SUIDPERL= true 75# 76# To build perl with thread support 77#PERL_THREADED= true 78# 79# To build ppp with normal permissions 80#PPP_NOSUID= true 81# 82# To enable installing ssh(1) with the setuid bit turned on 83#ENABLE_SUID_SSH= true 84# 85# To avoid building various parts of the base system: 86#NO_CVS= true # do not build CVS 87#NO_BIND= true # do not build BIND 88#NO_FORTRAN= true # do not build g77 and related libraries 89#NO_LPR= true # do not build lpr and related programs 90#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 91#NO_MODULES= true # do not build modules with the kernel 92#NO_OBJC= true # do not build Objective C support 93#NO_OPENSSH= true # do not build OpenSSH 94#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 95#NO_SENDMAIL= true # do not build sendmail and related programs 96#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 97#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 98#NO_X= true # do not compile in XWindows support (e.g. doscmd) 99#NOCRYPT= true # do not build any crypto code 100#NOGAMES= true # do not build games (games/ subdir) 101#NOINFO= true # do not make or install info files 102#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 103#NOPERL= true # do not build perl. Disables OpenSSL optimizations 104#NOPROFILE= true # Avoid compiling profiled libraries 105#NOSECURE= true # do not build crypto code in secure/ subdir 106#NOSHARE= true # do not go into the share subdir 107#NOUUCP= true # do not build uucp related programs 108# 109# To build the OpenSSL manpages, uncomment the following. These are not 110# built by default because they clobber a number of system manpages with 111# manpages describing parts of the OpenSSL toolkit, including passwd(1), 112# err(3), md5(3), and others. 113# 114#WANT_OPENSSL_MANPAGES= true 115# 116# To build sys/modules when building the world (our old way of doing things) 117#MODULES_WITH_WORLD=true # do not build modules when building kernel 118# 119# 120# The following controls building optional IDEA code in libcrypto and 121# certain ports. Patents are involved - you must not use this unless 122# you either have a license or fall within patent 'fair use' 123# provisions. 124# 125# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 126# 127# IDEA is patented in the USA and many european countries - thought to 128# be OK to use for any non-commercial use. This is optional. 129#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 130# 131# To avoid running MAKEDEV all on /dev during install: 132#NO_MAKEDEV= true 133# 134# If you do not want unformatted manual pages to be compressed 135# when they are installed: 136# 137#NOMANCOMPRESS= true 138# 139# 140# If you want the "compat" shared libraries installed as part of your normal 141# builds, uncomment these: 142# 143#COMPAT1X= yes 144#COMPAT20= yes 145#COMPAT21= yes 146#COMPAT22= yes 147#COMPAT3X= yes 148# 149# 150# If you do not want additional documentation (some of which are 151# a few hundred KB's) for ports to be installed: 152# 153#NOPORTDOCS= true 154# 155# 156# Default format for system documentation, depends on your printer. 157# Set this to "ascii" for simple printers or screen 158# 159#PRINTERDEVICE= ps 160# 161# 162# How long to wait for a console keypress before booting the default kernel. 163# This value is approximately in milliseconds. Keypresses are accepted by the 164# BIOS before booting from disk, making it possible to give custom boot 165# parameters even when this is set to 0. 166# 167#BOOTWAIT=0 168#BOOTWAIT=30000 169# 170# By default, the system will always use the keyboard/video card as system 171# console. However, the boot blocks may be dynamically configured to use a 172# serial port in addition to or instead of the keyboard/video console. 173# 174# By default we use COM1 as our serial console port *if* we're going to use 175# a serial port as our console at all. Alter as necessary. 176# 177# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 178# 179#BOOT_COMCONSOLE_PORT= 0x3F8 180# 181# The default serial console speed is 9600. Set the speed to a larger value 182# for better interactive response. 183# 184#BOOT_COMCONSOLE_SPEED= 115200 185# 186# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 187# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 188# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 189# still mount the server's '/' (i.e. rather then load the server's kernel). 190# 191#LOADER_TFTP_SUPPORT= YES 192# 193# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 194# If you have a XFree86 from before 3.0 that has the X distribution in 195# /usr/X386, you want to uncomment this. 196# 197#X11BASE= /usr/X386 198# 199# 200# If you have Motif on your system, uncomment this. 201# 202#HAVE_MOTIF= yes 203#MOTIF_STATIC= yes 204# 205# If the default location of the Motif library (specified below) is NOT 206# appropriate for you, uncomment this and change it to the correct value. 207# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 208# 209#MOTIFLIB= -L${X11BASE}/lib -lXm 210# 211# 212# If you're resident in the USA, this will help various ports to determine 213# whether or not they should attempt to comply with the various U.S. 214# export regulations on certain types of software which do not apply to 215# anyone else in the world. 216# 217#USA_RESIDENT= YES 218# 219# 220# Override "don't install a port that's already installed" behavior. 221# One might wish to do this for ports debugging or to unconditionally 222# reinstall a set of suspect/broken ports. 223# 224#FORCE_PKG_REGISTER= YES 225# 226# 227# If you're behind a firewall and need FTP or HTTP proxy services for 228# ports collection fetching to work, the following examples give the 229# necessary syntax. See the fetch(3) man page for details. 230# 231#FTP_PROXY= 10.0.0.1:21 232#HTTP_PROXY= 10.0.0.1:80 233# 234# 235# Port master sites. 236# 237# If you want your port fetches to go somewhere else than the default 238# (specified below) in case the distfile/patchfile was not found, 239# uncomment this and change it to a location nearest you. (Don't 240# remove the "/${DIST_SUBDIR}/" part.) 241# 242#MASTER_SITE_BACKUP?= \ 243# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 244# 245# If you want your port fetches to check the above site first (before 246# the MASTER_SITES specified in the port Makefiles), uncomment the 247# line below. You can also change the right side to point to wherever 248# you want. 249# 250#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 251# 252# Some ports use a special variable to point to a collection of 253# mirrors of well-known software archives. If you have a mirror close 254# to you, uncomment any of the following lines and change it to that 255# address. (Don't remove the "/%SUBDIR%/" part.) 256# 257# Note: the right hand sides of the following lines are only for your 258# information. For a full list of default sites, take a look at 259# bsd.sites.mk. 260# 261#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 262#MASTER_SITE_XFREE= ftp://ftp.freesoftware.com/pub/XFree86/%SUBDIR%/source/ 263#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ 264#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 265#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 266#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 267#MASTER_SITE_RINGSERVER= ftp://ring.ocn.ad.jp/pub/%SUBDIR%/ 268#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 269#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 270#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/ 271#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 272#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 273#MASTER_SITE_MOZILLA= ftp://ftp.yggdrasil.com/mirrors/site/ftp.mozilla.org/pub/%SUBDIR%/ 274#MASTER_SITE_XEMACS= ftp://ftp.sunsite.utk.edu/pub/xemacs/%SUBDIR%/ 275#MASTER_SITE_TCLTK= ftp://ftp.uu.net/languages/tcl/%SUBDIR%/ 276#MASTER_SITE_RUBY= ftp://ftp.fu-berlin.de/unix/languages/ruby/%SUBDIR%/ 277# 278# Also it is highly recommended that you configure MASTER_SORT_REGEX 279# to choose better mirror sites for you. List awk(1)-style regular 280# expressions separated by space so MASTER_SITES will be sorted in 281# that order. The following example is for Japanese users; change 282# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names 283# of your nearest/upstream networks to meet your needs. 284# 285#MASTER_SORT_REGEX?= ^file: ^ftp://ftp\.FreeBSD\.org/pub/FreeBSD/ports/local-distfiles/ ://[^/]*\.jp/ ://[^/]*\.jp\. 286# 287# Kerberos IV 288# If you want KerberosIV (KTH eBones), define this: 289# 290#MAKE_KERBEROS4= yes 291# 292# 293# Kerberos 5 294# If you want KerberosIV (KTH Heimdal), define this: 295# 296#MAKE_KERBEROS5= yes 297# 298# 299# Kerberos5 300# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 301# define this (this is also used to tell ssh1 that kerberos is needed): 302# 303#KRB5_HOME= /usr/local 304# 305# 306# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 307# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 308# information on CVSup and these files). To use, do "make update" in /usr/src. 309# 310#SUP_UPDATE= yes 311# 312#SUP= /usr/local/bin/cvsup 313#SUPFLAGS= -g -L 2 314#SUPHOST= cvsup.uk.FreeBSD.org 315#SUPFILE= /usr/share/examples/cvsup/standard-supfile 316#SUPFILE1= /usr/share/examples/cvsup/secure-supfile 317#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 318#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 319# 320# top(1) uses a hash table for the user names. The size of this hash 321# can be tuned to match the number of local users. The table size should 322# be a prime number approximately twice as large as the number of lines in 323# /etc/passwd. The default number is 20011. 324# 325#TOP_TABLE_SIZE= 101 326# 327# Documentation 328# 329# The list of languages and encodings to build and install 330# 331#DOC_LANG= en_US.ISO_8859-1 ru_RU.KOI8-R 332# 333# 334# sendmail 335# 336# The following sets the default m4 configuration file to use at 337# install time. Use with caution as a make install will overwrite 338# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 339# deprecated. The value should be a fully qualified path name. 340# 341#SENDMAIL_MC=/etc/mail/myconfig.mc 342# 343# If you need to build additional .cf files during a make buildworld, 344# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 345# 346#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 347# 348# Setting the following variables modifes the build environment for 349# sendmail and its related utilities. For example, SASL support can be 350# added with settings such as: 351# 352# SENDMAIL_CFLAGS=-I/usr/local/include/sasl -DSASL 353# SENDMAIL_LDFLAGS=-L/usr/local/lib 354# SENDMAIL_LDADD=-lsasl 355# 356# Note: If you are using Cyrus SASL with other applications which require 357# access to the sasldb file, you should add '-D_FFR_UNSAFE_SASL' to 358# SENDMAIL_CFLAGS. Also, add the following to your sendmail.mc file: 359# 360# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLFile') 361# 362#SENDMAIL_CFLAGS= 363#SENDMAIL_LDFLAGS= 364#SENDMAIL_LDADD= 365#SENDMAIL_DPADD= 366