make.conf revision 65381
1# $FreeBSD: head/share/examples/etc/make.conf 65381 2000-09-02 22:46:04Z obrien $ 2# 3# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 4# It allows you to override macro definitions to make without changing 5# your source tree, or anything the source tree installs. 6# 7# This file must be in valid Makefile syntax. 8# 9# You have to find the things you can put here in the Makefiles and 10# documentation of the source tree. 11# 12# CFLAGS controls the compiler settings used when compiling C code. 13# Note that optimisation settings above -O (-O2, ...) are not recommended 14# or supported for compiling the world or the kernel - please revert any 15# nonstandard optimisation settings to "-O" before submitting bug reports 16# to the developers. 17# Note also that at this time the -O2 setting is known to produce BROKEN 18# CODE on the Alpha platform. 19# 20#CFLAGS= -O -pipe 21# 22# CXXFLAGS controls the compiler settings used when compiling C++ code. 23# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 24# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 25# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 26# 27#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 28# 29# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 30# for use in developing FreeBSD and testing changes. They can be used by 31# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. 32# 33BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 34 -Wcast-qual -Wchar-subscripts -Wconversion -Winline \ 35 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 36 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 37# 38# To compile just the kernel with special optimisations, you should use 39# this instead of CFLAGS (which is not applicable to kernel builds anyway): 40# 41#COPTFLAGS= -O -pipe 42# 43# Compare before install 44#INSTALL=install -C 45# 46# To enable building enstalling suidperl with the setuid bit turned on 47#ENABLE_SUIDPERL= true 48# 49# To build perl with thread support 50#PERL_THREADED= true 51# 52# To build ppp with normal permissions 53#PPP_NOSUID= true 54# 55# To avoid building various parts of the base system: 56#NO_CVS= true # do not build CVS 57#NO_BIND= true # do not build BIND 58#NO_FORTRAN= true # do not build g77 and related libraries 59#NO_LPR= true # do not build lpr and related programs 60#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 61#NO_MODULES= true # do not build modules with the kernel 62#NO_OBJC= true # do not build Objective C support 63#NO_OPENSSH= true # do not build OpenSSH 64#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 65#NO_SENDMAIL= true # do not build sendmail and related programs 66#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 67#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 68#NO_X= true # do not compile in XWindows support (e.g. doscmd) 69#NOCRYPT= true # do not build any crypto code 70#NODESCRYPTLINKS=true # do not replace libcrypt -> libscrypt links 71#NOGAMES= true # do not build games (games/ subdir) 72#NOINFO= true # do not make or install info files 73#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 74#NOPERL= true # To avoid building perl 75#NOPROFILE= true # Avoid compiling profiled libraries 76#NOSECURE= true # do not build crypto code in secure/ subdir 77#NOSHARE= true # do not go into the share subdir 78#NOUUCP= true # do not build uucp related programs 79# 80# To build sys/modules when building the world (our old way of doing things) 81#MODULES_WITH_WORLD=true # do not build modules when building kernel 82# 83# 84# Controls for building various OPTIONAL parts of the crypto system. 85# Patents are involved - you must not use these unless you either have 86# a license or would be within patent 'fair use' provisions. 87# Generally 'educational use' is OK, but personal (even non-commercial) 88# use is not. 89# *** It is YOUR RESPONSIBILITY to determine if you can use these! *** 90# 91# Patented in the USA and many european countries - thought to be OK to 92# use for any non-commercial use. This is optional. 93#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 94# 95# Patented in the USA only (due to expire in September 2000). RSA is 96# required for OpenSSH. Either use this or ports/security/rsaref. 97#MAKE_RSAINTL= YES # RSA (public key exchange) 98# 99# 100# To avoid running MAKEDEV all on /dev during install: 101#NO_MAKEDEV= true 102# 103# If you do not want unformatted manual pages to be compressed 104# when they are installed: 105# 106#NOMANCOMPRESS= true 107# 108# 109# If you want the "compat" shared libraries installed as part of your normal 110# builds, uncomment these: 111# 112#COMPAT1X= yes 113#COMPAT20= yes 114#COMPAT21= yes 115#COMPAT22= yes 116#COMPAT3X= yes 117# 118# 119# If you do not want additional documentation (some of which are 120# a few hundred KB's) for ports to be installed: 121# 122#NOPORTDOCS= true 123# 124# 125# Default format for system documentation, depends on your printer. 126# Set this to "ascii" for simple printers or screen 127# 128#PRINTERDEVICE= ps 129# 130# 131# How long to wait for a console keypress before booting the default kernel. 132# This value is approximately in milliseconds. Keypresses are accepted by the 133# BIOS before booting from disk, making it possible to give custom boot 134# parameters even when this is set to 0. 135# 136#BOOTWAIT=0 137#BOOTWAIT=30000 138# 139# By default, the system will always use the keyboard/video card as system 140# console. However, the boot blocks may be dynamically configured to use a 141# serial port in addition to or instead of the keyboard/video console. 142# 143# By default we use COM1 as our serial console port *if* we're going to use 144# a serial port as our console at all. Alter as necessary. 145# 146# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 147# 148#BOOT_COMCONSOLE_PORT= 0x3F8 149# 150# The default serial console speed is 9600. Set the speed to a larger value 151# for better interactive response. 152# 153#BOOT_COMCONSOLE_SPEED= 115200 154# 155# 156# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 157# If you have a XFree86 from before 3.0 that has the X distribution in 158# /usr/X386, you want to uncomment this. 159# 160#X11BASE= /usr/X386 161# 162# 163# If you have Motif on your system, uncomment this. 164# 165#HAVE_MOTIF= yes 166#MOTIF_STATIC= yes 167# 168# If the default location of the Motif library (specified below) is NOT 169# appropriate for you, uncomment this and change it to the correct value. 170# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 171# 172#MOTIFLIB= -L${X11BASE}/lib -lXm 173# 174# 175# If you're resident in the USA, this will help various ports to determine 176# whether or not they should attempt to comply with the various U.S. 177# export regulations on certain types of software which do not apply to 178# anyone else in the world. 179# 180#USA_RESIDENT= YES 181# 182# Next one will help ports developers to debug 183# 184#FORCE_PKG_REGISTER= YES 185# 186# 187# Port master sites. 188# 189# If you want your port fetches to go somewhere else than the default 190# (specified below) in case the distfile/patchfile was not found, 191# uncomment this and change it to a location nearest you. (Don't 192# remove the "/${DIST_SUBDIR}/" part.) 193# 194#MASTER_SITE_BACKUP?= \ 195# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 196# 197# If you want your port fetches to check the above site first (before 198# the MASTER_SITES specified in the port Makefiles), uncomment the 199# line below. You can also change the right side to point to wherever 200# you want. 201# 202#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 203# 204# Some ports use a special variable to point to a collection of 205# mirrors of well-known software archives. If you have a mirror close 206# to you, uncomment any of the following lines and change it to that 207# address. (Don't remove the "/%SUBDIR%/" part.) 208# 209# Note: the right hand sides of the following lines are only for your 210# information. For a full list of default sites, take a look at 211# bsd.port.mk. 212# 213#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 214#MASTER_SITE_GNU= ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ 215#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 216#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 217#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 218#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 219#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 220#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/ 221#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 222#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 223# 224# 225# Kerberos IV 226# If you want KerberosIV (KTH eBones), define this: 227# 228#MAKE_KERBEROS4= yes 229# 230# 231# Kerberos 5 232# If you want KerberosIV (KTH Heimdal), define this: 233# ** WARNING ** 234# ** WARNING ** This is very experimental at this stage. If you 235# ** WARNING ** need stable Kerberos5, rather use the port(s). 236# ** WARNING ** 237# 238#MAKE_KERBEROS5= yes 239# 240# 241# Kerberos5 242# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 243# define this (this is also used to tell ssh1 that kerberos is needed): 244# 245#KRB5_HOME= /usr/local 246# 247# 248# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 249# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 250# information on CVSup and these files). To use, do "make update" in /usr/src. 251# 252#SUP_UPDATE= yes 253# 254#SUP= /usr/local/bin/cvsup 255#SUPFLAGS= -g -L 2 256#SUPHOST= cvsup.uk.FreeBSD.org 257#SUPFILE= /usr/share/examples/cvsup/standard-supfile 258#SUPFILE1= /usr/share/examples/cvsup/secure-supfile 259#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 260#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 261# 262# top(1) uses a hash table for the user names. The size of this hash 263# can be tuned to match the number of local users. The table size should 264# be a prime number approximately twice as large as the number of lines in 265# /etc/passwd. The default number is 20011. 266# 267#TOP_TABLE_SIZE= 101 268# 269# Documentation 270# 271# The list of languages and encodings to build and install 272# 273#DOC_LANG= en_US.ISO_8859-1 ru_RU.KOI8-R 274