options.hlp revision 247280
1The following options may be set from this screen. 2 3NFS Secure: NFS server talks only on a secure port 4 5 This is most commonly used when talking to Sun workstations, which 6 will not talk NFS over "non privileged" ports. 7 8 9NFS Slow: User is using a slow PC or Ethernet card 10 11 Use this option if you have a slow PC (386) or an Ethernet card 12 with poor performance being "fed" by NFS on a higher-performance 13 workstation. This will throttle the workstation back to prevent 14 the PC from becoming swamped with data. 15 16 17NFS TCP: Use TCP for the NFS mount 18 19 This option can be used if your NFS server supports TCP 20 connections; not all do! This may be useful if your NFS server 21 is at a remote site in which case it may offer some additional 22 stability. 23 24 25NFS version 3: Use NFS version 3 26 27 This option forces the use of NFS version 3 and is on by default. 28 If your NFS server only supports NFS version 2, disable this option. 29 30 31Debugging: Turn on the extra debugging flag 32 33 This turns on a lot of extra noise in between dialogs (unless 34 debugFile has been set, sending the data to a logfile instead). 35 Optionally, if debugFile begins with a plus sign (`+'), output will 36 occur both on standard output and to debugFile (minus leading plus). 37 If your installation should fail for any reason, PLEASE turn this 38 flag on when attempting to reproduce the problem. It will provide a 39 lot of extra debugging at the failure point and may be very helpful 40 to the developers in tracking such problems down! 41 42 43DHCP: Enable DHCP configuration of interfaces 44 45 This option specifies whether DHCP configuration of interfaces 46 may be attempted. The default setting is to interactively ask 47 the user. 48 49 50IPv6: Enable IPv6 router solicitation configuration 51 52 This option specifies whether automatic configuration of IPv6 53 interfaces may be attempted. This uses the router solicitation 54 method of automatic configuration. The default setting is to 55 interactively ask the user. 56 57 58FTP username: Specify username and password instead of anonymous. 59 60 By default, the installation attempts to log in as the 61 anonymous user. If you wish to log in as someone else, 62 specify the username and password with this option. 63 64 65Editor: Specify which screen editor to use. 66 67 At various points during the installation it may be necessary 68 to customize some text file, at which point the user will be 69 thrown unceremoniously into a screen editor. A relatively 70 simplistic editor which shows its command set on-screen is 71 selected by default, but UNIX purists may wish to change this 72 setting to `/usr/bin/vi'. 73 74 75Release Name: Which release to attempt to load from installation media. 76 77 You should only change this option if you're really sure you know 78 what you are doing! This will change the release name used by 79 bsdconfig when fetching components of any distributions, and 80 is a useful way of using a more recent installation boot floppy 81 with an older release (say, on CDROM). 82 83 84Media Type: Which media type is being used. 85 86 This is mostly informational and indicates which media type (if any) 87 was last selected in the Media menu. It's also a convenient short-cut 88 to the media menu itself. 89 90 91Re-scan Devices: 92 93 Reprobe the system for devices. 94 95 96Use Defaults: Use default values. 97 98 Reset all options back to their default values. 99