All rights reserved.
Copyright (c) 2002-2004 Michael Telahun Makonnen <mtm@FreeBSD.org>
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$FreeBSD: releng/10.2/usr.sbin/adduser/adduser.8 240530 2012-09-15 16:24:03Z issyl0 $
.Dd September 15, 2012 .Dt ADDUSER 8 .Os .Sh NAME .Nm adduser .Nd command for adding new users .Sh SYNOPSIS .Nm .Op Fl CDENShq .Op Fl G Ar groups .Op Fl L Ar login_class .Op Fl M Ar mode .Op Fl d Ar partition .Op Fl f Ar file .Op Fl g Ar login_group .Op Fl k Ar dotdir .Op Fl m Ar message_file .Op Fl s Ar shell .Op Fl u Ar uid_start .Op Fl w Ar type .Sh DESCRIPTION The .Nm utility is a shell script, implemented around the .Xr pw 8 command, for adding new users. It creates passwd/group entries, a home directory, copies dotfiles and sends the new user a welcome message. It supports two modes of operation. It may be used interactively at the command line to add one user at a time, or it may be directed to get the list of new users from a file and operate in batch mode without requiring any user interaction. .Sh RESTRICTIONS l -tag -width indent t username Login name. The user name is restricted to whatever .Xr pw 8 will accept. Generally this means it may contain only lowercase characters or digits but cannot begin with the .Ql - character. Maximum length is 16 characters. The reasons for this limit are historical. Given that people have traditionally wanted to break this limit for aesthetic reasons, it has never been of great importance to break such a basic fundamental parameter in x . You can change .Dv UT_NAMESIZE in n utmp.h and recompile the world; people have done this and it works, but you will have problems with any precompiled programs, or source that assumes the 8-character name limit, such as NIS. The NIS protocol mandates an 8-character username. If you need a longer login name for e-mail addresses, you can define an alias in
a /etc/mail/aliases . t "full name" This is typically known as the gecos field and usually contains the user's full name. Additionally, it may contain a comma separated list of values such as office number and work and home phones. If the name contains an ampersand it will be replaced by the capitalized login name when displayed by other programs. The .Ql : character is not allowed. t shell Unless the .Fl S argument is supplied only valid shells from the shell database
q Pa /etc/shells are allowed. In addition, either the base name or the full path of the shell may be supplied. t UID Automatically generated or your choice. It must be less than 32000. t "GID/login group" Automatically generated or your choice. It must be less than 32000. t password You may choose an empty password, disable the password, use a randomly generated password or specify your own plaintext password, which will be encrypted before being stored in the user database. .El .Sh UNIQUE GROUPS Perhaps you are missing what .Em can be done with this scheme that falls apart with most other schemes. With each user in their own group, they can safely run with a umask of 002 instead of the usual 022 and create files in their home directory without worrying about others being able to change them.
p For a shared area you create a separate UID/GID, you place each person that should be able to access this area into that new group.
p This model of UID/GID administration allows far greater flexibility than lumping users into groups and having to muck with the umask when working in a shared area.
p I have been using this model for almost 10 years and found that it works for most situations, and has never gotten in the way. (Rod Grimes) .Sh CONFIGURATION The .Nm utility reads its configuration information from
a /etc/adduser.conf . If this file does not exist, it will use predefined defaults. While this file may be edited by hand, the safer option is to use the .Fl C command line argument. With this argument, .Nm will start interactive input, save the answers to its prompts in
a /etc/adduser.conf , and promptly exit without modifying the user database. Options specified on the command line will take precedence over any values saved in this file. .Sh OPTIONS l -tag -width indent t Fl C Create new configuration file and exit. This option is mutually exclusive with the .Fl f option. t Fl d Ar partition Home partition. Default partition, under which all user directories will be located. The
a /nonexistent partition is considered special. The .Nm script will not create and populate a home directory by that name. Otherwise, by default it attempts to create a home directory. t Fl D Do not attempt to create the home directory. t Fl E Disable the account. This option will lock the account by prepending the string .Dq Li *LOCKED* to the password field. The account may be unlocked by the super-user with the .Xr pw 8 command:
p .D1 Nm pw Cm unlock Op Ar name | uid t Fl f Ar file Get the list of accounts to create from .Ar file . If .Ar file is .Dq Fl , then get the list from standard input. If this option is specified, .Nm will operate in batch mode and will not seek any user input. If an error is encountered while processing an account, it will write a message to standard error and move to the next account. The format of the input file is described below. t Fl g Ar login_group Normally, if no login group is specified, it is assumed to be the same as the username. This option makes .Ar login_group the default. t Fl G Ar groups Space-separated list of additional groups. This option allows the user to specify additional groups to add users to. The user is a member of these groups in addition to their login group. t Fl h Print a summary of options and exit. t Fl k Ar directory Copy files from .Ar directory into the home directory of new users;
a dot.foo will be renamed to
a .foo . t Fl L Ar login_class Set default login class. t Fl m Ar file Send new users a welcome message from .Ar file . Specifying a value of .Cm no for .Ar file causes no message to be sent to new users. Please note that the message file can reference the internal variables of the .Nm script. t Fl M Ar mode Create the home directory with permissions set to .Ar mode . t Fl N Do not read the default configuration file. t Fl q Minimal user feedback. In particular, the random password will not be echoed to standard output. t Fl s Ar shell Default shell for new users. The .Ar shell argument may be the base name of the shell or the full path. Unless the .Fl S argument is supplied the shell must exist in
a /etc/shells or be the special shell .Em nologin to be considered a valid shell. t Fl S The existence or validity of the specified shell will not be checked. t Fl u Ar uid Use UIDs from .Ar uid on up. t Fl w Ar type Password type. The .Nm utility allows the user to specify what type of password to create. The .Ar type argument may have one of the following values: l -tag -width ".Cm random" t Cm no Disable the password. Instead of an encrypted string, the password field will contain a single .Ql * character. The user may not log in until the super-user manually enables the password. t Cm none Use an empty string as the password. t Cm yes Use a user-supplied string as the password. In interactive mode, the user will be prompted for the password. In batch mode, the last (10th) field in the line is assumed to be the password. t Cm random Generate a random string and use it as a password. The password will be echoed to standard output. In addition, it will be available for inclusion in the message file in the .Va randompass variable. .El .El .Sh FORMAT When the .Fl f option is used, the account information must be stored in a specific format. All empty lines or lines beginning with a .Ql # will be ignored. All other lines must contain ten colon
q Ql : separated fields as described below. Command line options do not take precedence over values in the fields. Only the password field may contain a .Ql : character as part of the string.
p .Sm off .D1 Ar name : uid : gid : class : change : expire : gecos : home_dir : shell : password .Sm on l -tag -width ".Ar password" t Ar name Login name. This field may not be empty. t Ar uid Numeric login user ID. If this field is left empty, it will be automatically generated. t Ar gid Numeric primary group ID. If this field is left empty, a group with the same name as the user name will be created and its GID will be used instead. t Ar class Login class. This field may be left empty. t Ar change Password ageing. This field denotes the password change date for the account. The format of this field is the same as the format of the .Fl p argument to .Xr pw 8 . It may be .Ar dd Ns - Ns Ar mmm Ns - Ns Ar yy Ns Op Ar yy , where .Ar dd is for the day, .Ar mmm is for the month in numeric or alphabetical format: .Dq Li 10 or .Dq Li Oct , and .Ar yy Ns Op Ar yy is the four or two digit year. To denote a time relative to the current date the format is: .No + Ns Ar n Ns Op Ar mhdwoy , where .Ar n denotes a number, followed by the minutes, hours, days, weeks, months or years after which the password must be changed. This field may be left empty to turn it off. t Ar expire Account expiration. This field denotes the expiry date of the account. The account may not be used after the specified date. The format of this field is the same as that for password ageing. This field may be left empty to turn it off. t Ar gecos Full name and other extra information about the user. t Ar home_dir Home directory. If this field is left empty, it will be automatically created by appending the username to the home partition. The
a /nonexistent home directory is considered special and is understood to mean that no home directory is to be created for the user. t Ar shell Login shell. This field should contain either the base name or the full path to a valid login shell. t Ar password User password. This field should contain a plaintext string, which will be encrypted before being placed in the user database. If the password type is .Cm yes and this field is empty, it is assumed the account will have an empty password. If the password type is .Cm random and this field is .Em not empty, its contents will be used as a password. This field will be ignored if the .Fl w option is used with a .Cm no or .Cm none argument. Be careful not to terminate this field with a closing .Ql : because it will be treated as part of the password. .El .Sh FILES l -tag -width ".Pa /etc/adduser.message" -compact t Pa /etc/master.passwd user database t Pa /etc/group group database t Pa /etc/shells shell database t Pa /etc/login.conf login classes database t Pa /etc/adduser.conf configuration file for .Nm t Pa /etc/adduser.message message file for .Nm t Pa /usr/share/skel skeletal login directory t Pa /var/log/adduser logfile for .Nm .El .Sh SEE ALSO .Xr chpass 1 , .Xr passwd 1 , .Xr adduser.conf 5 , .Xr aliases 5 , .Xr group 5 , .Xr login.conf 5 , .Xr passwd 5 , .Xr shells 5 , .Xr adding_user 8 , .Xr pw 8 , .Xr pwd_mkdb 8 , .Xr rmuser 8 , .Xr vipw 8 , .Xr yp 8 .Sh HISTORY The .Nm command appeared in .Fx 2.1 . .Sh AUTHORS .An -nosplit This manual page and the original script, in Perl, was written by .An Wolfram Schneider Aq wosch@FreeBSD.org . The replacement script, written as a Bourne shell script with some enhancements, and the man page modification that came with it were done by .An Mike Makonnen Aq mtm@identd.net . .Sh BUGS In order for .Nm to correctly expand variables such as .Va $username and .Va $randompass in the message sent to new users, it must let the shell evaluate each line of the message file. This means that shell commands can also be embedded in the message file. The .Nm utility attempts to mitigate the possibility of an attacker using this feature by refusing to evaluate the file if it is not owned and writable only by the root user. In addition, shell special characters and operators will have to be escaped when used in the message file.
p Also, password ageing and account expiry times are currently settable only in batch mode or when specified in
a /etc/adduser.conf . The user should be able to set them in interactive mode as well.