spr.h revision 215182
1/*- 2 * Copyright (c) 2001 The NetBSD Foundation, Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 15 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 16 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 17 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 18 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 19 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 20 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 21 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 22 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 23 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 24 * POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $NetBSD: spr.h,v 1.25 2002/08/14 15:38:40 matt Exp $ 27 * $FreeBSD: head/sys/powerpc/include/spr.h 215182 2010-11-12 15:20:10Z nwhitehorn $ 28 */ 29#ifndef _POWERPC_SPR_H_ 30#define _POWERPC_SPR_H_ 31 32#ifndef _LOCORE 33#define mtspr(reg, val) \ 34 __asm __volatile("mtspr %0,%1" : : "K"(reg), "r"(val)) 35#define mfspr(reg) \ 36 ( { register_t val; \ 37 __asm __volatile("mfspr %0,%1" : "=r"(val) : "K"(reg)); \ 38 val; } ) 39 40 41#ifndef __powerpc64__ 42 43/* The following routines allow manipulation of the full 64-bit width 44 * of SPRs on 64 bit CPUs in bridge mode */ 45 46#define mtspr64(reg,valhi,vallo,scratch) \ 47 __asm __volatile(" \ 48 mfmsr %0; \ 49 insrdi %0,%5,1,0; \ 50 mtmsrd %0; \ 51 isync; \ 52 \ 53 sld %1,%1,%4; \ 54 or %1,%1,%2; \ 55 mtspr %3,%1; \ 56 srd %1,%1,%4; \ 57 \ 58 clrldi %0,%0,1; \ 59 mtmsrd %0; \ 60 isync;" \ 61 : "=r"(scratch), "=r"(valhi) : "r"(vallo), "K"(reg), "r"(32), "r"(1)) 62 63#define mfspr64upper(reg,scratch) \ 64 ( { register_t val; \ 65 __asm __volatile(" \ 66 mfmsr %0; \ 67 insrdi %0,%4,1,0; \ 68 mtmsrd %0; \ 69 isync; \ 70 \ 71 mfspr %1,%2; \ 72 srd %1,%1,%3; \ 73 \ 74 clrldi %0,%0,1; \ 75 mtmsrd %0; \ 76 isync;" \ 77 : "=r"(scratch), "=r"(val) : "K"(reg), "r"(32), "r"(1)); \ 78 val; } ) 79 80#endif 81 82#endif /* _LOCORE */ 83 84/* 85 * Special Purpose Register declarations. 86 * 87 * The first column in the comments indicates which PowerPC 88 * architectures the SPR is valid on - 4 for 4xx series, 89 * 6 for 6xx/7xx series and 8 for 8xx and 8xxx series. 90 */ 91 92#define SPR_MQ 0x000 /* .6. 601 MQ register */ 93#define SPR_XER 0x001 /* 468 Fixed Point Exception Register */ 94#define SPR_RTCU_R 0x004 /* .6. 601 RTC Upper - Read */ 95#define SPR_RTCL_R 0x005 /* .6. 601 RTC Lower - Read */ 96#define SPR_LR 0x008 /* 468 Link Register */ 97#define SPR_CTR 0x009 /* 468 Count Register */ 98#define SPR_DSISR 0x012 /* .68 DSI exception source */ 99#define DSISR_DIRECT 0x80000000 /* Direct-store error exception */ 100#define DSISR_NOTFOUND 0x40000000 /* Translation not found */ 101#define DSISR_PROTECT 0x08000000 /* Memory access not permitted */ 102#define DSISR_INVRX 0x04000000 /* Reserve-indexed insn direct-store access */ 103#define DSISR_STORE 0x02000000 /* Store operation */ 104#define DSISR_DABR 0x00400000 /* DABR match */ 105#define DSISR_SEGMENT 0x00200000 /* XXX; not in 6xx PEM */ 106#define DSISR_EAR 0x00100000 /* eciwx/ecowx && EAR[E] == 0 */ 107#define SPR_DAR 0x013 /* .68 Data Address Register */ 108#define SPR_RTCU_W 0x014 /* .6. 601 RTC Upper - Write */ 109#define SPR_RTCL_W 0x015 /* .6. 601 RTC Lower - Write */ 110#define SPR_DEC 0x016 /* .68 DECrementer register */ 111#define SPR_SDR1 0x019 /* .68 Page table base address register */ 112#define SPR_SRR0 0x01a /* 468 Save/Restore Register 0 */ 113#define SPR_SRR1 0x01b /* 468 Save/Restore Register 1 */ 114#define SPR_DECAR 0x036 /* ..8 Decrementer auto reload */ 115#define SPR_EIE 0x050 /* ..8 Exception Interrupt ??? */ 116#define SPR_EID 0x051 /* ..8 Exception Interrupt ??? */ 117#define SPR_NRI 0x052 /* ..8 Exception Interrupt ??? */ 118#define SPR_USPRG0 0x100 /* 4.. User SPR General 0 */ 119#define SPR_VRSAVE 0x100 /* .6. AltiVec VRSAVE */ 120#define SPR_SPRG0 0x110 /* 468 SPR General 0 */ 121#define SPR_SPRG1 0x111 /* 468 SPR General 1 */ 122#define SPR_SPRG2 0x112 /* 468 SPR General 2 */ 123#define SPR_SPRG3 0x113 /* 468 SPR General 3 */ 124#define SPR_SPRG4 0x114 /* 4.. SPR General 4 */ 125#define SPR_SPRG5 0x115 /* 4.. SPR General 5 */ 126#define SPR_SPRG6 0x116 /* 4.. SPR General 6 */ 127#define SPR_SPRG7 0x117 /* 4.. SPR General 7 */ 128#define SPR_SCOMC 0x114 /* ... SCOM Address Register (970) */ 129#define SPR_SCOMD 0x115 /* ... SCOM Data Register (970) */ 130#define SPR_ASR 0x118 /* ... Address Space Register (PPC64) */ 131#define SPR_EAR 0x11a /* .68 External Access Register */ 132#define SPR_PVR 0x11f /* 468 Processor Version Register */ 133#define MPC601 0x0001 134#define MPC603 0x0003 135#define MPC604 0x0004 136#define MPC602 0x0005 137#define MPC603e 0x0006 138#define MPC603ev 0x0007 139#define MPC750 0x0008 140#define MPC604ev 0x0009 141#define MPC7400 0x000c 142#define MPC620 0x0014 143#define IBM403 0x0020 144#define IBM401A1 0x0021 145#define IBM401B2 0x0022 146#define IBM401C2 0x0023 147#define IBM401D2 0x0024 148#define IBM401E2 0x0025 149#define IBM401F2 0x0026 150#define IBM401G2 0x0027 151#define IBMRS64II 0x0033 152#define IBMRS64III 0x0034 153#define IBMPOWER4 0x0035 154#define IBMRS64III_2 0x0036 155#define IBMRS64IV 0x0037 156#define IBMPOWER4PLUS 0x0038 157#define IBM970 0x0039 158#define IBMPOWER5 0x003a 159#define IBMPOWER5PLUS 0x003b 160#define IBM970FX 0x003c 161#define IBMPOWER6 0x003e 162#define IBMPOWER7 0x003f 163#define IBMPOWER3 0x0040 164#define IBMPOWER3PLUS 0x0041 165#define IBM970MP 0x0044 166#define IBM970GX 0x0045 167#define MPC860 0x0050 168#define IBMCELLBE 0x0070 169#define MPC8240 0x0081 170#define PA6T 0x0090 171#define IBM405GP 0x4011 172#define IBM405L 0x4161 173#define IBM750FX 0x7000 174#define MPC745X_P(v) ((v & 0xFFF8) == 0x8000) 175#define MPC7450 0x8000 176#define MPC7455 0x8001 177#define MPC7457 0x8002 178#define MPC7447A 0x8003 179#define MPC7448 0x8004 180#define MPC7410 0x800c 181#define MPC8245 0x8081 182#define FSL_E500v1 0x8020 183#define FSL_E500v2 0x8021 184 185#define SPR_IBAT0U 0x210 /* .68 Instruction BAT Reg 0 Upper */ 186#define SPR_IBAT0U 0x210 /* .6. Instruction BAT Reg 0 Upper */ 187#define SPR_IBAT0L 0x211 /* .6. Instruction BAT Reg 0 Lower */ 188#define SPR_IBAT1U 0x212 /* .6. Instruction BAT Reg 1 Upper */ 189#define SPR_IBAT1L 0x213 /* .6. Instruction BAT Reg 1 Lower */ 190#define SPR_IBAT2U 0x214 /* .6. Instruction BAT Reg 2 Upper */ 191#define SPR_IBAT2L 0x215 /* .6. Instruction BAT Reg 2 Lower */ 192#define SPR_IBAT3U 0x216 /* .6. Instruction BAT Reg 3 Upper */ 193#define SPR_IBAT3L 0x217 /* .6. Instruction BAT Reg 3 Lower */ 194#define SPR_DBAT0U 0x218 /* .6. Data BAT Reg 0 Upper */ 195#define SPR_DBAT0L 0x219 /* .6. Data BAT Reg 0 Lower */ 196#define SPR_DBAT1U 0x21a /* .6. Data BAT Reg 1 Upper */ 197#define SPR_DBAT1L 0x21b /* .6. Data BAT Reg 1 Lower */ 198#define SPR_DBAT2U 0x21c /* .6. Data BAT Reg 2 Upper */ 199#define SPR_DBAT2L 0x21d /* .6. Data BAT Reg 2 Lower */ 200#define SPR_DBAT3U 0x21e /* .6. Data BAT Reg 3 Upper */ 201#define SPR_DBAT3L 0x21f /* .6. Data BAT Reg 3 Lower */ 202#define SPR_IC_CST 0x230 /* ..8 Instruction Cache CSR */ 203#define IC_CST_IEN 0x80000000 /* I cache is ENabled (RO) */ 204#define IC_CST_CMD_INVALL 0x0c000000 /* I cache invalidate all */ 205#define IC_CST_CMD_UNLOCKALL 0x0a000000 /* I cache unlock all */ 206#define IC_CST_CMD_UNLOCK 0x08000000 /* I cache unlock block */ 207#define IC_CST_CMD_LOADLOCK 0x06000000 /* I cache load & lock block */ 208#define IC_CST_CMD_DISABLE 0x04000000 /* I cache disable */ 209#define IC_CST_CMD_ENABLE 0x02000000 /* I cache enable */ 210#define IC_CST_CCER1 0x00200000 /* I cache error type 1 (RO) */ 211#define IC_CST_CCER2 0x00100000 /* I cache error type 2 (RO) */ 212#define IC_CST_CCER3 0x00080000 /* I cache error type 3 (RO) */ 213#define SPR_IBAT4U 0x230 /* .6. Instruction BAT Reg 4 Upper */ 214#define SPR_IC_ADR 0x231 /* ..8 Instruction Cache Address */ 215#define SPR_IBAT4L 0x231 /* .6. Instruction BAT Reg 4 Lower */ 216#define SPR_IC_DAT 0x232 /* ..8 Instruction Cache Data */ 217#define SPR_IBAT5U 0x232 /* .6. Instruction BAT Reg 5 Upper */ 218#define SPR_IBAT5L 0x233 /* .6. Instruction BAT Reg 5 Lower */ 219#define SPR_IBAT6U 0x234 /* .6. Instruction BAT Reg 6 Upper */ 220#define SPR_IBAT6L 0x235 /* .6. Instruction BAT Reg 6 Lower */ 221#define SPR_IBAT7U 0x236 /* .6. Instruction BAT Reg 7 Upper */ 222#define SPR_IBAT7L 0x237 /* .6. Instruction BAT Reg 7 Lower */ 223#define SPR_DC_CST 0x230 /* ..8 Data Cache CSR */ 224#define DC_CST_DEN 0x80000000 /* D cache ENabled (RO) */ 225#define DC_CST_DFWT 0x40000000 /* D cache Force Write-Thru (RO) */ 226#define DC_CST_LES 0x20000000 /* D cache Little Endian Swap (RO) */ 227#define DC_CST_CMD_FLUSH 0x0e000000 /* D cache invalidate all */ 228#define DC_CST_CMD_INVALL 0x0c000000 /* D cache invalidate all */ 229#define DC_CST_CMD_UNLOCKALL 0x0a000000 /* D cache unlock all */ 230#define DC_CST_CMD_UNLOCK 0x08000000 /* D cache unlock block */ 231#define DC_CST_CMD_CLRLESWAP 0x07000000 /* D cache clr little-endian swap */ 232#define DC_CST_CMD_LOADLOCK 0x06000000 /* D cache load & lock block */ 233#define DC_CST_CMD_SETLESWAP 0x05000000 /* D cache set little-endian swap */ 234#define DC_CST_CMD_DISABLE 0x04000000 /* D cache disable */ 235#define DC_CST_CMD_CLRFWT 0x03000000 /* D cache clear forced write-thru */ 236#define DC_CST_CMD_ENABLE 0x02000000 /* D cache enable */ 237#define DC_CST_CMD_SETFWT 0x01000000 /* D cache set forced write-thru */ 238#define DC_CST_CCER1 0x00200000 /* D cache error type 1 (RO) */ 239#define DC_CST_CCER2 0x00100000 /* D cache error type 2 (RO) */ 240#define DC_CST_CCER3 0x00080000 /* D cache error type 3 (RO) */ 241#define SPR_DBAT4U 0x238 /* .6. Data BAT Reg 4 Upper */ 242#define SPR_DC_ADR 0x231 /* ..8 Data Cache Address */ 243#define SPR_DBAT4L 0x239 /* .6. Data BAT Reg 4 Lower */ 244#define SPR_DC_DAT 0x232 /* ..8 Data Cache Data */ 245#define SPR_DBAT5U 0x23a /* .6. Data BAT Reg 5 Upper */ 246#define SPR_DBAT5L 0x23b /* .6. Data BAT Reg 5 Lower */ 247#define SPR_DBAT6U 0x23c /* .6. Data BAT Reg 6 Upper */ 248#define SPR_DBAT6L 0x23d /* .6. Data BAT Reg 6 Lower */ 249#define SPR_DBAT7U 0x23e /* .6. Data BAT Reg 7 Upper */ 250#define SPR_DBAT7L 0x23f /* .6. Data BAT Reg 7 Lower */ 251#define SPR_MI_CTR 0x310 /* ..8 IMMU control */ 252#define Mx_CTR_GPM 0x80000000 /* Group Protection Mode */ 253#define Mx_CTR_PPM 0x40000000 /* Page Protection Mode */ 254#define Mx_CTR_CIDEF 0x20000000 /* Cache-Inhibit DEFault */ 255#define MD_CTR_WTDEF 0x20000000 /* Write-Through DEFault */ 256#define Mx_CTR_RSV4 0x08000000 /* Reserve 4 TLB entries */ 257#define MD_CTR_TWAM 0x04000000 /* TableWalk Assist Mode */ 258#define Mx_CTR_PPCS 0x02000000 /* Priv/user state compare mode */ 259#define Mx_CTR_TLB_INDX 0x000001f0 /* TLB index mask */ 260#define Mx_CTR_TLB_INDX_BITPOS 8 /* TLB index shift */ 261#define SPR_MI_AP 0x312 /* ..8 IMMU access protection */ 262#define Mx_GP_SUPER(n) (0 << (2*(15-(n)))) /* access is supervisor */ 263#define Mx_GP_PAGE (1 << (2*(15-(n)))) /* access is page protect */ 264#define Mx_GP_SWAPPED (2 << (2*(15-(n)))) /* access is swapped */ 265#define Mx_GP_USER (3 << (2*(15-(n)))) /* access is user */ 266#define SPR_MI_EPN 0x313 /* ..8 IMMU effective number */ 267#define Mx_EPN_EPN 0xfffff000 /* Effective Page Number mask */ 268#define Mx_EPN_EV 0x00000020 /* Entry Valid */ 269#define Mx_EPN_ASID 0x0000000f /* Address Space ID */ 270#define SPR_MI_TWC 0x315 /* ..8 IMMU tablewalk control */ 271#define MD_TWC_L2TB 0xfffff000 /* Level-2 Tablewalk Base */ 272#define Mx_TWC_APG 0x000001e0 /* Access Protection Group */ 273#define Mx_TWC_G 0x00000010 /* Guarded memory */ 274#define Mx_TWC_PS 0x0000000c /* Page Size (L1) */ 275#define MD_TWC_WT 0x00000002 /* Write-Through */ 276#define Mx_TWC_V 0x00000001 /* Entry Valid */ 277#define SPR_MI_RPN 0x316 /* ..8 IMMU real (phys) page number */ 278#define Mx_RPN_RPN 0xfffff000 /* Real Page Number */ 279#define Mx_RPN_PP 0x00000ff0 /* Page Protection */ 280#define Mx_RPN_SPS 0x00000008 /* Small Page Size */ 281#define Mx_RPN_SH 0x00000004 /* SHared page */ 282#define Mx_RPN_CI 0x00000002 /* Cache Inhibit */ 283#define Mx_RPN_V 0x00000001 /* Valid */ 284#define SPR_MD_CTR 0x318 /* ..8 DMMU control */ 285#define SPR_M_CASID 0x319 /* ..8 CASID */ 286#define M_CASID 0x0000000f /* Current AS Id */ 287#define SPR_MD_AP 0x31a /* ..8 DMMU access protection */ 288#define SPR_MD_EPN 0x31b /* ..8 DMMU effective number */ 289#define SPR_M_TWB 0x31c /* ..8 MMU tablewalk base */ 290#define M_TWB_L1TB 0xfffff000 /* level-1 translation base */ 291#define M_TWB_L1INDX 0x00000ffc /* level-1 index */ 292#define SPR_MD_TWC 0x31d /* ..8 DMMU tablewalk control */ 293#define SPR_MD_RPN 0x31e /* ..8 DMMU real (phys) page number */ 294#define SPR_MD_TW 0x31f /* ..8 MMU tablewalk scratch */ 295#define SPR_MI_CAM 0x330 /* ..8 IMMU CAM entry read */ 296#define SPR_MI_RAM0 0x331 /* ..8 IMMU RAM entry read reg 0 */ 297#define SPR_MI_RAM1 0x332 /* ..8 IMMU RAM entry read reg 1 */ 298#define SPR_MD_CAM 0x338 /* ..8 IMMU CAM entry read */ 299#define SPR_MD_RAM0 0x339 /* ..8 IMMU RAM entry read reg 0 */ 300#define SPR_MD_RAM1 0x33a /* ..8 IMMU RAM entry read reg 1 */ 301#define SPR_UMMCR2 0x3a0 /* .6. User Monitor Mode Control Register 2 */ 302#define SPR_UMMCR0 0x3a8 /* .6. User Monitor Mode Control Register 0 */ 303#define SPR_USIA 0x3ab /* .6. User Sampled Instruction Address */ 304#define SPR_UMMCR1 0x3ac /* .6. User Monitor Mode Control Register 1 */ 305#define SPR_ZPR 0x3b0 /* 4.. Zone Protection Register */ 306#define SPR_MMCR2 0x3b0 /* .6. Monitor Mode Control Register 2 */ 307#define SPR_MMCR2_THRESHMULT_32 0x80000000 /* Multiply MMCR0 threshold by 32 */ 308#define SPR_MMCR2_THRESHMULT_2 0x00000000 /* Multiply MMCR0 threshold by 2 */ 309#define SPR_PID 0x3b1 /* 4.. Process ID */ 310#define SPR_PMC5 0x3b1 /* .6. Performance Counter Register 5 */ 311#define SPR_PMC6 0x3b2 /* .6. Performance Counter Register 6 */ 312#define SPR_CCR0 0x3b3 /* 4.. Core Configuration Register 0 */ 313#define SPR_IAC3 0x3b4 /* 4.. Instruction Address Compare 3 */ 314#define SPR_IAC4 0x3b5 /* 4.. Instruction Address Compare 4 */ 315#define SPR_DVC1 0x3b6 /* 4.. Data Value Compare 1 */ 316#define SPR_DVC2 0x3b7 /* 4.. Data Value Compare 2 */ 317#define SPR_MMCR0 0x3b8 /* .6. Monitor Mode Control Register 0 */ 318 319#define SPR_970MMCR0 0x31b /* ... Monitor Mode Control Register 0 (PPC 970) */ 320#define SPR_970MMCR1 0x31e /* ... Monitor Mode Control Register 1 (PPC 970) */ 321#define SPR_970MMCRA 0x312 /* ... Monitor Mode Control Register 2 (PPC 970) */ 322#define SPR_970MMCR0 0x31b /* ... Monitor Mode Control Register 0 (PPC 970) */ 323#define SPR_970PMC1 0x313 /* ... PMC 1 */ 324#define SPR_970PMC2 0x314 /* ... PMC 2 */ 325#define SPR_970PMC3 0x315 /* ... PMC 3 */ 326#define SPR_970PMC4 0x316 /* ... PMC 4 */ 327#define SPR_970PMC5 0x317 /* ... PMC 5 */ 328#define SPR_970PMC6 0x318 /* ... PMC 6 */ 329#define SPR_970PMC7 0x319 /* ... PMC 7 */ 330#define SPR_970PMC8 0x31a /* ... PMC 8 */ 331 332#define SPR_MMCR0_FC 0x80000000 /* Freeze counters */ 333#define SPR_MMCR0_FCS 0x40000000 /* Freeze counters in supervisor mode */ 334#define SPR_MMCR0_FCP 0x20000000 /* Freeze counters in user mode */ 335#define SPR_MMCR0_FCM1 0x10000000 /* Freeze counters when mark=1 */ 336#define SPR_MMCR0_FCM0 0x08000000 /* Freeze counters when mark=0 */ 337#define SPR_MMCR0_PMXE 0x04000000 /* Enable PM interrupt */ 338#define SPR_MMCR0_FCECE 0x02000000 /* Freeze counters after event */ 339#define SPR_MMCR0_TBSEL_15 0x01800000 /* Count bit 15 of TBL */ 340#define SPR_MMCR0_TBSEL_19 0x01000000 /* Count bit 19 of TBL */ 341#define SPR_MMCR0_TBSEL_23 0x00800000 /* Count bit 23 of TBL */ 342#define SPR_MMCR0_TBSEL_31 0x00000000 /* Count bit 31 of TBL */ 343#define SPR_MMCR0_TBEE 0x00400000 /* Time-base event enable */ 344#define SPR_MMCRO_THRESHOLD(x) ((x) << 16) /* Threshold value */ 345#define SPR_MMCR0_PMC1CE 0x00008000 /* PMC1 condition enable */ 346#define SPR_MMCR0_PMCNCE 0x00004000 /* PMCn condition enable */ 347#define SPR_MMCR0_TRIGGER 0x00002000 /* Trigger */ 348#define SPR_MMCR0_PMC1SEL(x) ((x) << 6) /* PMC1 selector */ 349#define SPR_MMCR0_PMC2SEL(x) ((x) << 0) /* PMC2 selector */ 350#define SPR_970MMCR0_PMC1SEL(x) ((x) << 8) /* PMC1 selector (970) */ 351#define SPR_970MMCR0_PMC2SEL(x) ((x) << 1) /* PMC2 selector (970) */ 352#define SPR_SGR 0x3b9 /* 4.. Storage Guarded Register */ 353#define SPR_PMC1 0x3b9 /* .6. Performance Counter Register 1 */ 354#define SPR_DCWR 0x3ba /* 4.. Data Cache Write-through Register */ 355#define SPR_PMC2 0x3ba /* .6. Performance Counter Register 2 */ 356#define SPR_SLER 0x3bb /* 4.. Storage Little Endian Register */ 357#define SPR_SIA 0x3bb /* .6. Sampled Instruction Address */ 358#define SPR_MMCR1 0x3bc /* .6. Monitor Mode Control Register 2 */ 359#define SPR_MMCR1_PMC3SEL(x) ((x) << 27) /* PMC 3 selector */ 360#define SPR_MMCR1_PMC4SEL(x) ((x) << 22) /* PMC 4 selector */ 361#define SPR_MMCR1_PMC5SEL(x) ((x) << 17) /* PMC 5 selector */ 362#define SPR_MMCR1_PMC6SEL(x) ((x) << 11) /* PMC 6 selector */ 363 364#define SPR_SU0R 0x3bc /* 4.. Storage User-defined 0 Register */ 365#define SPR_PMC3 0x3bd /* .6. Performance Counter Register 3 */ 366#define SPR_PMC4 0x3be /* .6. Performance Counter Register 4 */ 367#define SPR_DMISS 0x3d0 /* .68 Data TLB Miss Address Register */ 368#define SPR_DCMP 0x3d1 /* .68 Data TLB Compare Register */ 369#define SPR_HASH1 0x3d2 /* .68 Primary Hash Address Register */ 370#define SPR_ICDBDR 0x3d3 /* 4.. Instruction Cache Debug Data Register */ 371#define SPR_HASH2 0x3d3 /* .68 Secondary Hash Address Register */ 372#define SPR_IMISS 0x3d4 /* .68 Instruction TLB Miss Address Register */ 373#define SPR_TLBMISS 0x3d4 /* .6. TLB Miss Address Register */ 374#define SPR_DEAR 0x3d5 /* 4.. Data Error Address Register */ 375#define SPR_ICMP 0x3d5 /* .68 Instruction TLB Compare Register */ 376#define SPR_PTEHI 0x3d5 /* .6. Instruction TLB Compare Register */ 377#define SPR_EVPR 0x3d6 /* 4.. Exception Vector Prefix Register */ 378#define SPR_RPA 0x3d6 /* .68 Required Physical Address Register */ 379#define SPR_PTELO 0x3d6 /* .6. Required Physical Address Register */ 380 381#define SPR_TSR 0x150 /* ..8 Timer Status Register */ 382#define SPR_TCR 0x154 /* ..8 Timer Control Register */ 383 384#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ 385#define TSR_WIS 0x40000000 /* Watchdog Interrupt Status */ 386#define TSR_WRS_MASK 0x30000000 /* Watchdog Reset Status */ 387#define TSR_WRS_NONE 0x00000000 /* No watchdog reset has occurred */ 388#define TSR_WRS_CORE 0x10000000 /* Core reset was forced by the watchdog */ 389#define TSR_WRS_CHIP 0x20000000 /* Chip reset was forced by the watchdog */ 390#define TSR_WRS_SYSTEM 0x30000000 /* System reset was forced by the watchdog */ 391#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ 392#define TSR_DIS 0x08000000 /* Decrementer Interrupt Status */ 393#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ 394 395#define TCR_WP_MASK 0xc0000000 /* Watchdog Period mask */ 396#define TCR_WP_2_17 0x00000000 /* 2**17 clocks */ 397#define TCR_WP_2_21 0x40000000 /* 2**21 clocks */ 398#define TCR_WP_2_25 0x80000000 /* 2**25 clocks */ 399#define TCR_WP_2_29 0xc0000000 /* 2**29 clocks */ 400#define TCR_WRC_MASK 0x30000000 /* Watchdog Reset Control mask */ 401#define TCR_WRC_NONE 0x00000000 /* No watchdog reset */ 402#define TCR_WRC_CORE 0x10000000 /* Core reset */ 403#define TCR_WRC_CHIP 0x20000000 /* Chip reset */ 404#define TCR_WRC_SYSTEM 0x30000000 /* System reset */ 405#define TCR_WIE 0x08000000 /* Watchdog Interrupt Enable */ 406#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ 407#define TCR_DIE 0x04000000 /* Pecrementer Interrupt Enable */ 408#define TCR_FP_MASK 0x03000000 /* FIT Period */ 409#define TCR_FP_2_9 0x00000000 /* 2**9 clocks */ 410#define TCR_FP_2_13 0x01000000 /* 2**13 clocks */ 411#define TCR_FP_2_17 0x02000000 /* 2**17 clocks */ 412#define TCR_FP_2_21 0x03000000 /* 2**21 clocks */ 413#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ 414#define TCR_ARE 0x00400000 /* Auto Reload Enable */ 415 416#define SPR_PIT 0x3db /* 4.. Programmable Interval Timer */ 417#define SPR_SRR2 0x3de /* 4.. Save/Restore Register 2 */ 418#define SPR_SRR3 0x3df /* 4.. Save/Restore Register 3 */ 419#define SPR_HID0 0x3f0 /* ..8 Hardware Implementation Register 0 */ 420#define SPR_HID1 0x3f1 /* ..8 Hardware Implementation Register 1 */ 421#define SPR_HID4 0x3f4 /* ..8 Hardware Implementation Register 4 */ 422#define SPR_HID5 0x3f6 /* ..8 Hardware Implementation Register 5 */ 423#define SPR_HID6 0x3f9 /* ..8 Hardware Implementation Register 6 */ 424 425#define SPR_CELL_TSRL 0x380 /* ... Cell BE Thread Status Register */ 426#define SPR_CELL_TSCR 0x399 /* ... Cell BE Thread Switch Register */ 427 428#if defined(AIM) 429#define SPR_DBSR 0x3f0 /* 4.. Debug Status Register */ 430#define DBSR_IC 0x80000000 /* Instruction completion debug event */ 431#define DBSR_BT 0x40000000 /* Branch Taken debug event */ 432#define DBSR_EDE 0x20000000 /* Exception debug event */ 433#define DBSR_TIE 0x10000000 /* Trap Instruction debug event */ 434#define DBSR_UDE 0x08000000 /* Unconditional debug event */ 435#define DBSR_IA1 0x04000000 /* IAC1 debug event */ 436#define DBSR_IA2 0x02000000 /* IAC2 debug event */ 437#define DBSR_DR1 0x01000000 /* DAC1 Read debug event */ 438#define DBSR_DW1 0x00800000 /* DAC1 Write debug event */ 439#define DBSR_DR2 0x00400000 /* DAC2 Read debug event */ 440#define DBSR_DW2 0x00200000 /* DAC2 Write debug event */ 441#define DBSR_IDE 0x00100000 /* Imprecise debug event */ 442#define DBSR_IA3 0x00080000 /* IAC3 debug event */ 443#define DBSR_IA4 0x00040000 /* IAC4 debug event */ 444#define DBSR_MRR 0x00000300 /* Most recent reset */ 445#define SPR_DBCR0 0x3f2 /* 4.. Debug Control Register 0 */ 446#define SPR_DBCR1 0x3bd /* 4.. Debug Control Register 1 */ 447#define SPR_IAC1 0x3f4 /* 4.. Instruction Address Compare 1 */ 448#define SPR_IAC2 0x3f5 /* 4.. Instruction Address Compare 2 */ 449#define SPR_DAC1 0x3f6 /* 4.. Data Address Compare 1 */ 450#define SPR_DAC2 0x3f7 /* 4.. Data Address Compare 2 */ 451#define SPR_PIR 0x3ff /* .6. Processor Identification Register */ 452#elif defined(E500) 453#define SPR_PIR 0x11e /* ..8 Processor Identification Register */ 454#define SPR_DBSR 0x130 /* ..8 Debug Status Register */ 455#define DBSR_IDE 0x80000000 /* Imprecise debug event. */ 456#define DBSR_UDE 0x40000000 /* Unconditional debug event. */ 457#define DBSR_MRR 0x30000000 /* Most recent Reset (mask). */ 458#define DBSR_ICMP 0x08000000 /* Instr. complete debug event. */ 459#define DBSR_BRT 0x04000000 /* Branch taken debug event. */ 460#define DBSR_IRPT 0x02000000 /* Interrupt taken debug event. */ 461#define DBSR_TRAP 0x01000000 /* Trap instr. debug event. */ 462#define DBSR_IAC1 0x00800000 /* Instr. address compare #1. */ 463#define DBSR_IAC2 0x00400000 /* Instr. address compare #2. */ 464#define DBSR_IAC3 0x00200000 /* Instr. address compare #3. */ 465#define DBSR_IAC4 0x00100000 /* Instr. address compare #4. */ 466#define DBSR_DAC1R 0x00080000 /* Data addr. read compare #1. */ 467#define DBSR_DAC1W 0x00040000 /* Data addr. write compare #1. */ 468#define DBSR_DAC2R 0x00020000 /* Data addr. read compare #2. */ 469#define DBSR_DAC2W 0x00010000 /* Data addr. write compare #2. */ 470#define DBSR_RET 0x00008000 /* Return debug event. */ 471#define SPR_DBCR0 0x134 /* ..8 Debug Control Register 0 */ 472#define SPR_DBCR1 0x135 /* ..8 Debug Control Register 1 */ 473#define SPR_IAC1 0x138 /* ..8 Instruction Address Compare 1 */ 474#define SPR_IAC2 0x139 /* ..8 Instruction Address Compare 2 */ 475#define SPR_DAC1 0x13c /* ..8 Data Address Compare 1 */ 476#define SPR_DAC2 0x13d /* ..8 Data Address Compare 2 */ 477#endif 478 479#define DBCR0_EDM 0x80000000 /* External Debug Mode */ 480#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ 481#define DBCR0_RST_MASK 0x30000000 /* ReSeT */ 482#define DBCR0_RST_NONE 0x00000000 /* No action */ 483#define DBCR0_RST_CORE 0x10000000 /* Core reset */ 484#define DBCR0_RST_CHIP 0x20000000 /* Chip reset */ 485#define DBCR0_RST_SYSTEM 0x30000000 /* System reset */ 486#define DBCR0_IC 0x08000000 /* Instruction Completion debug event */ 487#define DBCR0_BT 0x04000000 /* Branch Taken debug event */ 488#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ 489#define DBCR0_TDE 0x01000000 /* Trap Debug Event */ 490#define DBCR0_IA1 0x00800000 /* IAC (Instruction Address Compare) 1 debug event */ 491#define DBCR0_IA2 0x00400000 /* IAC 2 debug event */ 492#define DBCR0_IA12 0x00200000 /* Instruction Address Range Compare 1-2 */ 493#define DBCR0_IA12X 0x00100000 /* IA12 eXclusive */ 494#define DBCR0_IA3 0x00080000 /* IAC 3 debug event */ 495#define DBCR0_IA4 0x00040000 /* IAC 4 debug event */ 496#define DBCR0_IA34 0x00020000 /* Instruction Address Range Compare 3-4 */ 497#define DBCR0_IA34X 0x00010000 /* IA34 eXclusive */ 498#define DBCR0_IA12T 0x00008000 /* Instruction Address Range Compare 1-2 range Toggle */ 499#define DBCR0_IA34T 0x00004000 /* Instruction Address Range Compare 3-4 range Toggle */ 500#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ 501 502#define SPR_IABR 0x3f2 /* ..8 Instruction Address Breakpoint Register 0 */ 503#define SPR_DABR 0x3f5 /* .6. Data Address Breakpoint Register */ 504#define SPR_MSSCR0 0x3f6 /* .6. Memory SubSystem Control Register */ 505#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */ 506#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */ 507#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */ 508#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable*/ 509#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */ 510#define MSSCR0_MBO 0x00400000 /* 9: must be one */ 511#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */ 512#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */ 513#define MSSCR0_MBZ 0x000fffff /* 12-31: must be zero */ 514#define SPR_L2PM 0x3f8 /* .6. L2 Private Memory Control Register */ 515#define SPR_L2CR 0x3f9 /* .6. L2 Control Register */ 516#define L2CR_L2E 0x80000000 /* 0: L2 enable */ 517#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */ 518#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */ 519#define L2SIZ_2M 0x00000000 520#define L2SIZ_256K 0x10000000 521#define L2SIZ_512K 0x20000000 522#define L2SIZ_1M 0x30000000 523#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */ 524#define L2CLK_DIS 0x00000000 /* disable L2 clock */ 525#define L2CLK_10 0x02000000 /* core clock / 1 */ 526#define L2CLK_15 0x04000000 /* / 1.5 */ 527#define L2CLK_20 0x08000000 /* / 2 */ 528#define L2CLK_25 0x0a000000 /* / 2.5 */ 529#define L2CLK_30 0x0c000000 /* / 3 */ 530#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */ 531#define L2RAM_FLOWTHRU_BURST 0x00000000 532#define L2RAM_PIPELINE_BURST 0x01000000 533#define L2RAM_PIPELINE_LATE 0x01800000 534#define L2CR_L2DO 0x00400000 /* 9: L2 data-only. 535 Setting this bit disables instruction 536 caching. */ 537#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */ 538#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable). 539 Enables automatic operation of the 540 L2ZZ (low-power mode) signal. */ 541#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */ 542#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */ 543#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */ 544#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */ 545#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */ 546#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */ 547#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */ 548#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */ 549#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */ 550#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */ 551#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */ 552#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */ 553 /* progress (read only). */ 554 555#define SPR_L3CR 0x3fa /* .6. L3 Control Register */ 556#define L3CR_L3E 0x80000000 /* 0: L3 enable */ 557#define L3CR_L3PE 0x40000000 /* 1: L3 data parity enable */ 558#define L3CR_L3APE 0x20000000 559#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */ 560#define L3CR_L3CLKEN 0x08000000 /* 4: Enables L3_CLK[0:1] */ 561#define L3CR_L3CLK 0x03800000 562#define L3CR_L3IO 0x00400000 563#define L3CR_L3CLKEXT 0x00200000 564#define L3CR_L3CKSPEXT 0x00100000 565#define L3CR_L3OH1 0x00080000 566#define L3CR_L3SPO 0x00040000 567#define L3CR_L3CKSP 0x00030000 568#define L3CR_L3PSP 0x0000e000 569#define L3CR_L3REP 0x00001000 570#define L3CR_L3HWF 0x00000800 571#define L3CR_L3I 0x00000400 /* 21: L3 global invalidate */ 572#define L3CR_L3RT 0x00000300 573#define L3CR_L3NIRCA 0x00000080 574#define L3CR_L3DO 0x00000040 575#define L3CR_PMEN 0x00000004 576#define L3CR_PMSIZ 0x00000003 577 578#define SPR_DCCR 0x3fa /* 4.. Data Cache Cachability Register */ 579#define SPR_ICCR 0x3fb /* 4.. Instruction Cache Cachability Register */ 580#define SPR_THRM1 0x3fc /* .6. Thermal Management Register */ 581#define SPR_THRM2 0x3fd /* .6. Thermal Management Register */ 582#define SPR_THRM_TIN 0x80000000 /* Thermal interrupt bit (RO) */ 583#define SPR_THRM_TIV 0x40000000 /* Thermal interrupt valid (RO) */ 584#define SPR_THRM_THRESHOLD(x) ((x) << 23) /* Thermal sensor threshold */ 585#define SPR_THRM_TID 0x00000004 /* Thermal interrupt direction */ 586#define SPR_THRM_TIE 0x00000002 /* Thermal interrupt enable */ 587#define SPR_THRM_VALID 0x00000001 /* Valid bit */ 588#define SPR_THRM3 0x3fe /* .6. Thermal Management Register */ 589#define SPR_THRM_TIMER(x) ((x) << 1) /* Sampling interval timer */ 590#define SPR_THRM_ENABLE 0x00000001 /* TAU Enable */ 591#define SPR_FPECR 0x3fe /* .6. Floating-Point Exception Cause Register */ 592 593/* Time Base Register declarations */ 594#define TBR_TBL 0x10c /* 468 Time Base Lower - read */ 595#define TBR_TBU 0x10d /* 468 Time Base Upper - read */ 596#define TBR_TBWL 0x11c /* 468 Time Base Lower - supervisor, write */ 597#define TBR_TBWU 0x11d /* 468 Time Base Upper - supervisor, write */ 598 599/* Performance counter declarations */ 600#define PMC_OVERFLOW 0x80000000 /* Counter has overflowed */ 601 602/* The first five countable [non-]events are common to many PMC's */ 603#define PMCN_NONE 0 /* Count nothing */ 604#define PMCN_CYCLES 1 /* Processor cycles */ 605#define PMCN_ICOMP 2 /* Instructions completed */ 606#define PMCN_TBLTRANS 3 /* TBL bit transitions */ 607#define PCMN_IDISPATCH 4 /* Instructions dispatched */ 608 609/* Similar things for the 970 PMC direct counters */ 610#define PMC970N_NONE 0x8 /* Count nothing */ 611#define PMC970N_CYCLES 0xf /* Processor cycles */ 612#define PMC970N_ICOMP 0x9 /* Instructions completed */ 613 614#if defined(AIM) 615 616#define SPR_ESR 0x3d4 /* 4.. Exception Syndrome Register */ 617#define ESR_MCI 0x80000000 /* Machine check - instruction */ 618#define ESR_PIL 0x08000000 /* Program interrupt - illegal */ 619#define ESR_PPR 0x04000000 /* Program interrupt - privileged */ 620#define ESR_PTR 0x02000000 /* Program interrupt - trap */ 621#define ESR_ST 0x01000000 /* Store operation */ 622#define ESR_DST 0x00800000 /* Data storage interrupt - store fault */ 623#define ESR_DIZ 0x00800000 /* Data/instruction storage interrupt - zone fault */ 624#define ESR_U0F 0x00008000 /* Data storage interrupt - U0 fault */ 625 626#elif defined(E500) 627 628#define SPR_ESR 0x003e /* ..8 Exception Syndrome Register */ 629#define ESR_PIL 0x08000000 /* Program interrupt - illegal */ 630#define ESR_PPR 0x04000000 /* Program interrupt - privileged */ 631#define ESR_PTR 0x02000000 /* Program interrupt - trap */ 632#define ESR_ST 0x00800000 /* Store operation */ 633#define ESR_DLK 0x00200000 /* Data storage, D cache locking */ 634#define ESR_ILK 0x00100000 /* Data storage, I cache locking */ 635#define ESR_BO 0x00020000 /* Data/instruction storage, byte ordering */ 636#define ESR_SPE 0x00000080 /* SPE exception bit */ 637 638#define SPR_CSRR0 0x03a /* ..8 58 Critical SRR0 */ 639#define SPR_CSRR1 0x03b /* ..8 59 Critical SRR1 */ 640#define SPR_MCSRR0 0x23a /* ..8 570 Machine check SRR0 */ 641#define SPR_MCSRR1 0x23b /* ..8 571 Machine check SRR1 */ 642 643#define SPR_SVR 0x3ff /* ..8 1023 System Version Register */ 644#define SVR_MPC8533 0x803c 645#define SVR_MPC8533E 0x8034 646#define SVR_MPC8541 0x8072 647#define SVR_MPC8541E 0x807a 648#define SVR_MPC8548 0x8031 649#define SVR_MPC8548E 0x8039 650#define SVR_MPC8555 0x8071 651#define SVR_MPC8555E 0x8079 652#define SVR_MPC8572 0x80e0 653#define SVR_MPC8572E 0x80e8 654#define SVR_VER(svr) (((svr) >> 16) & 0xffff) 655 656#define SPR_PID0 0x030 /* ..8 Process ID Register 0 */ 657#define SPR_PID1 0x279 /* ..8 Process ID Register 1 */ 658#define SPR_PID2 0x27a /* ..8 Process ID Register 2 */ 659 660#define SPR_TLB0CFG 0x2B0 /* ..8 TLB 0 Config Register */ 661#define SPR_TLB1CFG 0x2B1 /* ..8 TLB 1 Config Register */ 662#define TLBCFG_ASSOC_MASK 0xff000000 /* Associativity of TLB */ 663#define TLBCFG_ASSOC_SHIFT 24 664#define TLBCFG_NENTRY_MASK 0x00000fff /* Number of entries in TLB */ 665 666#define SPR_IVPR 0x03f /* ..8 Interrupt Vector Prefix Register */ 667#define SPR_IVOR0 0x190 /* ..8 Critical input */ 668#define SPR_IVOR1 0x191 /* ..8 Machine check */ 669#define SPR_IVOR2 0x192 670#define SPR_IVOR3 0x193 671#define SPR_IVOR4 0x194 672#define SPR_IVOR5 0x195 673#define SPR_IVOR6 0x196 674#define SPR_IVOR7 0x197 675#define SPR_IVOR8 0x198 676#define SPR_IVOR9 0x199 677#define SPR_IVOR10 0x19a 678#define SPR_IVOR11 0x19b 679#define SPR_IVOR12 0x19c 680#define SPR_IVOR13 0x19d 681#define SPR_IVOR14 0x19e 682#define SPR_IVOR15 0x19f 683#define SPR_IVOR32 0x210 684#define SPR_IVOR33 0x211 685#define SPR_IVOR34 0x212 686#define SPR_IVOR35 0x213 687 688#define SPR_MAS0 0x270 /* ..8 MMU Assist Register 0 Book-E/e500 */ 689#define SPR_MAS1 0x271 /* ..8 MMU Assist Register 1 Book-E/e500 */ 690#define SPR_MAS2 0x272 /* ..8 MMU Assist Register 2 Book-E/e500 */ 691#define SPR_MAS3 0x273 /* ..8 MMU Assist Register 3 Book-E/e500 */ 692#define SPR_MAS4 0x274 /* ..8 MMU Assist Register 4 Book-E/e500 */ 693#define SPR_MAS5 0x275 /* ..8 MMU Assist Register 5 Book-E */ 694#define SPR_MAS6 0x276 /* ..8 MMU Assist Register 6 Book-E/e500 */ 695#define SPR_MAS7 0x3B0 /* ..8 MMU Assist Register 7 Book-E/e500 */ 696 697#define SPR_L1CSR0 0x3F2 /* ..8 L1 Cache Control and Status Register 0 */ 698#define L1CSR0_DCPE 0x00010000 /* Data Cache Parity Enable */ 699#define L1CSR0_DCLFR 0x00000100 /* Data Cache Lock Bits Flash Reset */ 700#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ 701#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ 702#define SPR_L1CSR1 0x3F3 /* ..8 L1 Cache Control and Status Register 1 */ 703#define L1CSR1_ICPE 0x00010000 /* Instruction Cache Parity Enable */ 704#define L1CSR1_ICLFR 0x00000100 /* Instruction Cache Lock Bits Flash Reset */ 705#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */ 706#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */ 707 708#define SPR_BUCSR 0x3F5 /* ..8 Branch Unit Control and Status Register */ 709#define BUCSR_BPEN 0x00000001 /* Branch Prediction Enable */ 710 711#endif /* #elif defined(E500) */ 712 713#endif /* !_POWERPC_SPR_H_ */ 714