hid.h revision 141224
1/*- 2 * Copyright (c) 2000 Tsubai Masanari. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 24 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $NetBSD: hid.h,v 1.2 2001/08/22 21:05:25 matt Exp $ 27 * $FreeBSD: head/sys/powerpc/include/hid.h 141224 2005-02-04 01:14:38Z grehan $ 28 */ 29 30#ifndef _POWERPC_HID_H_ 31#define _POWERPC_HID_H_ 32 33/* Hardware Implementation Dependent registers for the PowerPC */ 34 35#define HID0_EMCP 0x80000000 /* Enable MCP */ 36#define HID0_DBP 0x40000000 /* Disable 60x bus parity generation */ 37#define HID0_EBA 0x20000000 /* Enable 60x bus address parity checking */ 38#define HID0_EBD 0x10000000 /* Enable 60x bus data parity checking */ 39#define HID0_BCLK 0x08000000 /* CLK_OUT clock type selection */ 40#define HID0_EICE 0x04000000 /* Enable ICE output */ 41#define HID0_TBEN 0x04000000 /* Time base enable (7450) */ 42#define HID0_ECLK 0x02000000 /* CLK_OUT clock type selection */ 43#define HID0_PAR 0x01000000 /* Disable precharge of ARTRY */ 44#define HID0_STEN 0x01000000 /* Software table search enable (7450) */ 45#define HID0_HBATEN 0x00800000 /* High BAT enable (74[45][578]) */ 46#define HID0_DOZE 0x00800000 /* Enable doze mode */ 47#define HID0_NAP 0x00400000 /* Enable nap mode */ 48#define HID0_SLEEP 0x00200000 /* Enable sleep mode */ 49#define HID0_DPM 0x00100000 /* Enable Dynamic power management */ 50#define HID0_RISEG 0x00080000 /* Read I-SEG */ 51#define HID0_BHTCLR 0x00040000 /* Clear branch history table (7450) */ 52#define HID0_EIEC 0x00040000 /* Enable internal error checking */ 53#define HID0_XAEN 0x00020000 /* Enable eXtended Addressing (7450) */ 54#define HID0_NHR 0x00010000 /* Not hard reset */ 55#define HID0_ICE 0x00008000 /* Enable i-cache */ 56#define HID0_DCE 0x00004000 /* Enable d-cache */ 57#define HID0_ILOCK 0x00002000 /* i-cache lock */ 58#define HID0_DLOCK 0x00001000 /* d-cache lock */ 59#define HID0_ICFI 0x00000800 /* i-cache flush invalidate */ 60#define HID0_DCFI 0x00000400 /* d-cache flush invalidate */ 61#define HID0_SPD 0x00000200 /* Disable speculative cache access */ 62#define HID0_XBSEN 0x00000100 /* Extended BAT block-size enable (7457) */ 63#define HID0_IFEM 0x00000100 /* Enable M-bit for I-fetch */ 64#define HID0_XBSEN 0x00000100 /* Extended BAT block size enable (7455+)*/ 65#define HID0_SGE 0x00000080 /* Enable store gathering */ 66#define HID0_DCFA 0x00000040 /* Data cache flush assist */ 67#define HID0_BTIC 0x00000020 /* Enable BTIC */ 68#define HID0_LRSTK 0x00000010 /* Link register stack enable (7450) */ 69#define HID0_ABE 0x00000008 /* Enable address broadcast */ 70#define HID0_FOLD 0x00000008 /* Branch folding enable (7450) */ 71#define HID0_BHT 0x00000004 /* Enable branch history table */ 72#define HID0_NOPTI 0x00000001 /* No-op the dcbt(st) */ 73 74#define HID0_BITMASK \ 75 "\20" \ 76 "\040EMCP\037DBP\036EBA\035EBD\034BCLK\033EICE\032ECLK\031PAR" \ 77 "\030DOZE\027NAP\026SLEEP\025DPM\024RISEG\023EIEC\022res\021NHR" \ 78 "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011IFEM" \ 79 "\010SGE\007DCFA\006BTIC\005FBIOB\004ABE\003BHT\002NOPDST\001NOPTI" 80 81#define HID0_7450_BITMASK \ 82 "\20" \ 83 "\040EMCP\037b1\036b2\035b3\034b4\033TBEN\032b6\031STEN" \ 84 "\030HBATEN\027NAP\026SLEEP\025DPM\024b12\023BHTCLR\022XAEN\021NHR" \ 85 "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011XBSEN" \ 86 "\010SGE\007b25\006BTIC\005LRSTK\004FOLD\003BHT\002NOPDST\001NOPTI" 87 88/* 89 * HID0 bit definitions per cpu model 90 * 91 * bit 603 604 750 7400 7410 7450 7457 92 * 0 EMCP EMCP EMCP EMCP EMCP - - 93 * 1 - ECP DBP - - - - 94 * 2 EBA EBA EBA EBA EDA - - 95 * 3 EBD EBD EBD EBD EBD - - 96 * 4 SBCLK - BCLK BCKL BCLK - - 97 * 5 EICE - - - - TBEN TBEN 98 * 6 ECLK - ECLK ECLK ECLK - - 99 * 7 PAR PAR PAR PAR PAR STEN STEN 100 * 8 DOZE - DOZE DOZE DOZE - HBATEN 101 * 9 NAP - NAP NAP NAP NAP NAP 102 * 10 SLEEP - SLEEP SLEEP SLEEP SLEEP SLEEP 103 * 11 DPM - DPM DPM DPM DPM DPM 104 * 12 RISEG - - RISEG - - - 105 * 13 - - - EIEC EIEC BHTCLR BHTCLR 106 * 14 - - - - - XAEN XAEN 107 * 15 - NHR NHR NHR NHR NHR NHR 108 * 16 ICE ICE ICE ICE ICE ICE ICE 109 * 17 DCE DCE DCE DCE DCE DCE DCE 110 * 18 ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK 111 * 19 DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK 112 * 20 ICFI ICFI ICFI ICFI ICFI ICFI ICFI 113 * 21 DCFI DCFI DCFI DCFI DCFI DCFI DCFI 114 * 22 - - SPD SPD SPG SPD SPD 115 * 23 - - IFEM IFTT IFTT - XBSEN 116 * 24 - SIE SGE SGE SGE SGE SGE 117 * 25 - - DCFA DCFA DCFA - - 118 * 26 - - BTIC BTIC BTIC BTIC BTIC 119 * 27 FBIOB - - - - LRSTK LRSTK 120 * 28 - - ABE - - FOLD FOLD 121 * 29 - BHT BHT BHT BHT BHT BHT 122 * 30 - - - NOPDST NOPDST NOPDST NOPDST 123 * 31 NOOPTI - NOOPTI NOPTI NOPTI NOPTI NOPTI 124 * 125 * 604: ECP = Enable cache parity checking 126 * 604: SIE = Serial instruction execution disable 127 * 7450: TBEN = Time Base Enable 128 * 7450: STEN = Software table lookup enable 129 * 7450: BHTCLR = Branch history clear 130 * 7450: XAEN = Extended Addressing Enabled 131 * 7450: LRSTK = Link Register Stack Enable 132 * 7450: FOLD = Branch folding enable 133 * 7457: HBATEN = High BAT Enable 134 * 7457: XBSEN = Extended BAT Block Size Enable 135 */ 136 137#endif /* _POWERPC_HID_H_ */ 138