locore.S revision 222391
1/*- 2 * Copyright (C) 2007-2009 Semihalf, Rafal Jaworowski <raj@semihalf.com> 3 * Copyright (C) 2006 Semihalf, Marian Balakowicz <m8@semihalf.com> 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 18 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 19 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 20 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 21 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 22 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 23 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 24 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $FreeBSD: head/sys/powerpc/booke/locore.S 222391 2011-05-27 23:09:12Z marcel $ 27 */ 28 29#include "assym.s" 30 31#include <machine/asm.h> 32#include <machine/hid.h> 33#include <machine/param.h> 34#include <machine/spr.h> 35#include <machine/pte.h> 36#include <machine/trap.h> 37#include <machine/vmparam.h> 38#include <machine/tlb.h> 39 40#define TMPSTACKSZ 16384 41 42 .text 43 .globl btext 44btext: 45 46/* 47 * This symbol is here for the benefit of kvm_mkdb, and is supposed to 48 * mark the start of kernel text. 49 */ 50 .globl kernel_text 51kernel_text: 52 53/* 54 * Startup entry. Note, this must be the first thing in the text segment! 55 */ 56 .text 57 .globl __start 58__start: 59 60/* 61 * Assumptions on the boot loader: 62 * - system memory starts from physical address 0 63 * - it's mapped by a single TBL1 entry 64 * - TLB1 mapping is 1:1 pa to va 65 * - kernel is loaded at 16MB boundary 66 * - all PID registers are set to the same value 67 * - CPU is running in AS=0 68 * 69 * Registers contents provided by the loader(8): 70 * r1 : stack pointer 71 * r3 : metadata pointer 72 * 73 * We rearrange the TLB1 layout as follows: 74 * - find TLB1 entry we started in 75 * - make sure it's protected, ivalidate other entries 76 * - create temp entry in the second AS (make sure it's not TLB[1]) 77 * - switch to temp mapping 78 * - map 16MB of RAM in TLB1[1] 79 * - use AS=1, set EPN to KERNBASE and RPN to kernel load address 80 * - switch to to TLB1[1] mapping 81 * - invalidate temp mapping 82 * 83 * locore registers use: 84 * r1 : stack pointer 85 * r2 : trace pointer (AP only, for early diagnostics) 86 * r3-r27 : scratch registers 87 * r28 : kernload 88 * r29 : temp TLB1 entry 89 * r30 : initial TLB1 entry we started in 90 * r31 : metadata pointer 91 */ 92 93/* 94 * Keep metadata ptr in r31 for later use. 95 */ 96 mr %r31, %r3 97 98/* 99 * Initial cleanup 100 */ 101 li %r3, PSL_DE /* Keep debug exceptions for CodeWarrior. */ 102 mtmsr %r3 103 isync 104 105 lis %r3, HID0_E500_DEFAULT_SET@h 106 ori %r3, %r3, HID0_E500_DEFAULT_SET@l 107 mtspr SPR_HID0, %r3 108 isync 109 lis %r3, HID1_E500_DEFAULT_SET@h 110 ori %r3, %r3, HID1_E500_DEFAULT_SET@l 111 mtspr SPR_HID1, %r3 112 isync 113 114 /* Invalidate all entries in TLB0 */ 115 li %r3, 0 116 bl tlb_inval_all 117 118/* 119 * Locate the TLB1 entry that maps this code 120 */ 121 bl 1f 1221: mflr %r3 123 bl tlb1_find_current /* the entry number found is returned in r30 */ 124 125 bl tlb1_inval_all_but_current 126/* 127 * Create temporary mapping in AS=1 and switch to it 128 */ 129 bl tlb1_temp_mapping_as1 130 131 mfmsr %r3 132 ori %r3, %r3, (PSL_IS | PSL_DS) 133 bl 2f 1342: mflr %r4 135 addi %r4, %r4, 20 136 mtspr SPR_SRR0, %r4 137 mtspr SPR_SRR1, %r3 138 rfi /* Switch context */ 139 140/* 141 * Invalidate initial entry 142 */ 143 mr %r3, %r30 144 bl tlb1_inval_entry 145 146/* 147 * Setup final mapping in TLB1[1] and switch to it 148 */ 149 /* Final kernel mapping, map in 16 MB of RAM */ 150 lis %r3, MAS0_TLBSEL1@h /* Select TLB1 */ 151 li %r4, 0 /* Entry 0 */ 152 rlwimi %r3, %r4, 16, 12, 15 153 mtspr SPR_MAS0, %r3 154 isync 155 156 li %r3, (TLB_SIZE_16M << MAS1_TSIZE_SHIFT)@l 157 oris %r3, %r3, (MAS1_VALID | MAS1_IPROT)@h 158 mtspr SPR_MAS1, %r3 /* note TS was not filled, so it's TS=0 */ 159 isync 160 161 lis %r3, KERNBASE@h 162 ori %r3, %r3, KERNBASE@l /* EPN = KERNBASE */ 163#ifdef SMP 164 ori %r3, %r3, MAS2_M@l /* WIMGE = 0b00100 */ 165#endif 166 mtspr SPR_MAS2, %r3 167 isync 168 169 /* Discover phys load address */ 170 bl 3f 1713: mflr %r4 /* Use current address */ 172 rlwinm %r4, %r4, 0, 0, 7 /* 16MB alignment mask */ 173 mr %r28, %r4 /* Keep kernel load address */ 174 ori %r4, %r4, (MAS3_SX | MAS3_SW | MAS3_SR)@l 175 mtspr SPR_MAS3, %r4 /* Set RPN and protection */ 176 isync 177 tlbwe 178 isync 179 msync 180 181 /* Switch to the above TLB1[1] mapping */ 182 bl 4f 1834: mflr %r4 184 rlwinm %r4, %r4, 0, 8, 31 /* Current offset from kernel load address */ 185 rlwinm %r3, %r3, 0, 0, 19 186 add %r4, %r4, %r3 /* Convert to kernel virtual address */ 187 addi %r4, %r4, 36 188 li %r3, PSL_DE /* Note AS=0 */ 189 mtspr SPR_SRR0, %r4 190 mtspr SPR_SRR1, %r3 191 rfi 192 193/* 194 * Invalidate temp mapping 195 */ 196 mr %r3, %r29 197 bl tlb1_inval_entry 198 199/* 200 * Save kernel load address for later use. 201 */ 202 lis %r3, kernload@ha 203 addi %r3, %r3, kernload@l 204 stw %r28, 0(%r3) 205#ifdef SMP 206 /* 207 * APs need a separate copy of kernload info within the __boot_page 208 * area so they can access this value very early, before their TLBs 209 * are fully set up and the kernload global location is available. 210 */ 211 lis %r3, kernload_ap@ha 212 addi %r3, %r3, kernload_ap@l 213 stw %r28, 0(%r3) 214 msync 215#endif 216 217/* 218 * Setup a temporary stack 219 */ 220 lis %r1, tmpstack@ha 221 addi %r1, %r1, tmpstack@l 222 addi %r1, %r1, (TMPSTACKSZ - 8) 223 224/* 225 * Initialise exception vector offsets 226 */ 227 bl ivor_setup 228 229/* 230 * Set up arguments and jump to system initialization code 231 */ 232 lis %r3, kernel_text@ha 233 addi %r3, %r3, kernel_text@l 234 lis %r4, _end@ha 235 addi %r4, %r4, _end@l 236 mr %r5, %r31 /* metadata ptr */ 237 238 /* Prepare e500 core */ 239 bl e500_init 240 241 /* Switch to thread0.td_kstack now */ 242 mr %r1, %r3 243 li %r3, 0 244 stw %r3, 0(%r1) 245 246 /* Machine independet part, does not return */ 247 bl mi_startup 248 /* NOT REACHED */ 2495: b 5b 250 251 252#ifdef SMP 253/************************************************************************/ 254/* AP Boot page */ 255/************************************************************************/ 256 .text 257 .globl __boot_page 258 .align 12 259__boot_page: 260 bl 1f 261 262kernload_ap: 263 .long 0 264 265/* 266 * Initial configuration 267 */ 2681: 269 /* Set HIDs */ 270 lis %r3, HID0_E500_DEFAULT_SET@h 271 ori %r3, %r3, HID0_E500_DEFAULT_SET@l 272 mtspr SPR_HID0, %r3 273 isync 274 lis %r3, HID1_E500_DEFAULT_SET@h 275 ori %r3, %r3, HID1_E500_DEFAULT_SET@l 276 mtspr SPR_HID1, %r3 277 isync 278 279 /* Enable branch prediction */ 280 li %r3, BUCSR_BPEN 281 mtspr SPR_BUCSR, %r3 282 isync 283 284 /* Invalidate all entries in TLB0 */ 285 li %r3, 0 286 bl tlb_inval_all 287 288/* 289 * Find TLB1 entry which is translating us now 290 */ 291 bl 2f 2922: mflr %r3 293 bl tlb1_find_current /* the entry number found is in r30 */ 294 295 bl tlb1_inval_all_but_current 296/* 297 * Create temporary translation in AS=1 and switch to it 298 */ 299 bl tlb1_temp_mapping_as1 300 301 mfmsr %r3 302 ori %r3, %r3, (PSL_IS | PSL_DS) 303 bl 3f 3043: mflr %r4 305 addi %r4, %r4, 20 306 mtspr SPR_SRR0, %r4 307 mtspr SPR_SRR1, %r3 308 rfi /* Switch context */ 309 310/* 311 * Invalidate initial entry 312 */ 313 mr %r3, %r30 314 bl tlb1_inval_entry 315 316/* 317 * Setup final mapping in TLB1[1] and switch to it 318 */ 319 /* Final kernel mapping, map in 16 MB of RAM */ 320 lis %r3, MAS0_TLBSEL1@h /* Select TLB1 */ 321 li %r4, 0 /* Entry 0 */ 322 rlwimi %r3, %r4, 16, 4, 15 323 mtspr SPR_MAS0, %r3 324 isync 325 326 li %r3, (TLB_SIZE_16M << MAS1_TSIZE_SHIFT)@l 327 oris %r3, %r3, (MAS1_VALID | MAS1_IPROT)@h 328 mtspr SPR_MAS1, %r3 /* note TS was not filled, so it's TS=0 */ 329 isync 330 331 lis %r3, KERNBASE@h 332 ori %r3, %r3, KERNBASE@l /* EPN = KERNBASE */ 333 ori %r3, %r3, MAS2_M@l /* WIMGE = 0b00100 */ 334 mtspr SPR_MAS2, %r3 335 isync 336 337 /* Retrieve kernel load [physical] address from kernload_ap */ 338 bl 4f 3394: mflr %r3 340 rlwinm %r3, %r3, 0, 0, 19 341 lis %r4, kernload_ap@h 342 ori %r4, %r4, kernload_ap@l 343 lis %r5, __boot_page@h 344 ori %r5, %r5, __boot_page@l 345 sub %r4, %r4, %r5 /* offset of kernload_ap within __boot_page */ 346 lwzx %r3, %r4, %r3 347 348 /* Set RPN and protection */ 349 ori %r3, %r3, (MAS3_SX | MAS3_SW | MAS3_SR)@l 350 mtspr SPR_MAS3, %r3 351 isync 352 tlbwe 353 isync 354 msync 355 356 /* Switch to the final mapping */ 357 bl 5f 3585: mflr %r3 359 rlwinm %r3, %r3, 0, 0xfff /* Offset from boot page start */ 360 add %r3, %r3, %r5 /* Make this virtual address */ 361 addi %r3, %r3, 32 362 li %r4, 0 /* Note AS=0 */ 363 mtspr SPR_SRR0, %r3 364 mtspr SPR_SRR1, %r4 365 rfi 366 367/* 368 * At this point we're running at virtual addresses KERNBASE and beyond so 369 * it's allowed to directly access all locations the kernel was linked 370 * against. 371 */ 372 373/* 374 * Invalidate temp mapping 375 */ 376 mr %r3, %r29 377 bl tlb1_inval_entry 378 379/* 380 * Setup a temporary stack 381 */ 382 lis %r1, tmpstack@ha 383 addi %r1, %r1, tmpstack@l 384 addi %r1, %r1, (TMPSTACKSZ - 8) 385 386/* 387 * Initialise exception vector offsets 388 */ 389 bl ivor_setup 390 391 /* 392 * Assign our pcpu instance 393 */ 394 lis %r3, ap_pcpu@h 395 ori %r3, %r3, ap_pcpu@l 396 lwz %r3, 0(%r3) 397 mtsprg0 %r3 398 399 bl pmap_bootstrap_ap 400 401 bl cpudep_ap_bootstrap 402 /* Switch to the idle thread's kstack */ 403 mr %r1, %r3 404 405 bl machdep_ap_bootstrap 406 407 /* NOT REACHED */ 4086: b 6b 409#endif /* SMP */ 410 411/* 412 * Invalidate all entries in the given TLB. 413 * 414 * r3 TLBSEL 415 */ 416tlb_inval_all: 417 rlwinm %r3, %r3, 3, 0x18 /* TLBSEL */ 418 ori %r3, %r3, 0x4 /* INVALL */ 419 tlbivax 0, %r3 420 isync 421 msync 422 423 tlbsync 424 msync 425 blr 426 427/* 428 * expects address to look up in r3, returns entry number in r30 429 * 430 * FIXME: the hidden assumption is we are now running in AS=0, but we should 431 * retrieve actual AS from MSR[IS|DS] and put it in MAS6[SAS] 432 */ 433tlb1_find_current: 434 mfspr %r17, SPR_PID0 435 slwi %r17, %r17, MAS6_SPID0_SHIFT 436 mtspr SPR_MAS6, %r17 437 isync 438 tlbsx 0, %r3 439 mfspr %r17, SPR_MAS0 440 rlwinm %r30, %r17, 16, 20, 31 /* MAS0[ESEL] -> r30 */ 441 442 /* Make sure we have IPROT set on the entry */ 443 mfspr %r17, SPR_MAS1 444 oris %r17, %r17, MAS1_IPROT@h 445 mtspr SPR_MAS1, %r17 446 isync 447 tlbwe 448 isync 449 msync 450 blr 451 452/* 453 * Invalidates a single entry in TLB1. 454 * 455 * r3 ESEL 456 * r4-r5 scratched 457 */ 458tlb1_inval_entry: 459 lis %r4, MAS0_TLBSEL1@h /* Select TLB1 */ 460 rlwimi %r4, %r3, 16, 12, 15 /* Select our entry */ 461 mtspr SPR_MAS0, %r4 462 isync 463 tlbre 464 li %r5, 0 /* MAS1[V] = 0 */ 465 mtspr SPR_MAS1, %r5 466 isync 467 tlbwe 468 isync 469 msync 470 blr 471 472/* 473 * r30 current entry number 474 * r29 returned temp entry 475 * r3-r5 scratched 476 */ 477tlb1_temp_mapping_as1: 478 /* Read our current translation */ 479 lis %r3, MAS0_TLBSEL1@h /* Select TLB1 */ 480 rlwimi %r3, %r30, 16, 12, 15 /* Select our current entry */ 481 mtspr SPR_MAS0, %r3 482 isync 483 tlbre 484 485 /* 486 * Prepare and write temp entry 487 * 488 * FIXME this is not robust against overflow i.e. when the current 489 * entry is the last in TLB1 490 */ 491 lis %r3, MAS0_TLBSEL1@h /* Select TLB1 */ 492 addi %r29, %r30, 1 /* Use next entry. */ 493 rlwimi %r3, %r29, 16, 12, 15 /* Select temp entry */ 494 mtspr SPR_MAS0, %r3 495 isync 496 mfspr %r5, SPR_MAS1 497 li %r4, 1 /* AS=1 */ 498 rlwimi %r5, %r4, 12, 19, 19 499 li %r4, 0 /* Global mapping, TID=0 */ 500 rlwimi %r5, %r4, 16, 8, 15 501 oris %r5, %r5, (MAS1_VALID | MAS1_IPROT)@h 502 mtspr SPR_MAS1, %r5 503 isync 504 tlbwe 505 isync 506 msync 507 blr 508 509/* 510 * Loops over TLB1, invalidates all entries skipping the one which currently 511 * maps this code. 512 * 513 * r30 current entry 514 * r3-r5 scratched 515 */ 516tlb1_inval_all_but_current: 517 mr %r6, %r3 518 mfspr %r3, SPR_TLB1CFG /* Get number of entries */ 519 andi. %r3, %r3, TLBCFG_NENTRY_MASK@l 520 li %r4, 0 /* Start from Entry 0 */ 5211: lis %r5, MAS0_TLBSEL1@h 522 rlwimi %r5, %r4, 16, 12, 15 523 mtspr SPR_MAS0, %r5 524 isync 525 tlbre 526 mfspr %r5, SPR_MAS1 527 cmpw %r4, %r30 /* our current entry? */ 528 beq 2f 529 rlwinm %r5, %r5, 0, 2, 31 /* clear VALID and IPROT bits */ 530 mtspr SPR_MAS1, %r5 531 isync 532 tlbwe 533 isync 534 msync 5352: addi %r4, %r4, 1 536 cmpw %r4, %r3 /* Check if this is the last entry */ 537 bne 1b 538 blr 539 540#ifdef SMP 541__boot_page_padding: 542 /* 543 * Boot page needs to be exactly 4K, with the last word of this page 544 * acting as the reset vector, so we need to stuff the remainder. 545 * Upon release from holdoff CPU fetches the last word of the boot 546 * page. 547 */ 548 .space 4092 - (__boot_page_padding - __boot_page) 549 b __boot_page 550#endif /* SMP */ 551 552/************************************************************************/ 553/* locore subroutines */ 554/************************************************************************/ 555 556ivor_setup: 557 /* Set base address of interrupt handler routines */ 558 lis %r3, interrupt_vector_base@h 559 mtspr SPR_IVPR, %r3 560 561 /* Assign interrupt handler routines offsets */ 562 li %r3, int_critical_input@l 563 mtspr SPR_IVOR0, %r3 564 li %r3, int_machine_check@l 565 mtspr SPR_IVOR1, %r3 566 li %r3, int_data_storage@l 567 mtspr SPR_IVOR2, %r3 568 li %r3, int_instr_storage@l 569 mtspr SPR_IVOR3, %r3 570 li %r3, int_external_input@l 571 mtspr SPR_IVOR4, %r3 572 li %r3, int_alignment@l 573 mtspr SPR_IVOR5, %r3 574 li %r3, int_program@l 575 mtspr SPR_IVOR6, %r3 576 li %r3, int_syscall@l 577 mtspr SPR_IVOR8, %r3 578 li %r3, int_decrementer@l 579 mtspr SPR_IVOR10, %r3 580 li %r3, int_fixed_interval_timer@l 581 mtspr SPR_IVOR11, %r3 582 li %r3, int_watchdog@l 583 mtspr SPR_IVOR12, %r3 584 li %r3, int_data_tlb_error@l 585 mtspr SPR_IVOR13, %r3 586 li %r3, int_inst_tlb_error@l 587 mtspr SPR_IVOR14, %r3 588 li %r3, int_debug@l 589 mtspr SPR_IVOR15, %r3 590 blr 591 592/* 593 * void tid_flush(tlbtid_t tid); 594 * 595 * Invalidate all TLB0 entries which match the given TID. Note this is 596 * dedicated for cases when invalidation(s) should NOT be propagated to other 597 * CPUs. 598 * 599 * Global vars tlb0_ways, tlb0_entries_per_way are assumed to have been set up 600 * correctly (by tlb0_get_tlbconf()). 601 * 602 */ 603ENTRY(tid_flush) 604 cmpwi %r3, TID_KERNEL 605 beq tid_flush_end /* don't evict kernel translations */ 606 607 /* Number of TLB0 ways */ 608 lis %r4, tlb0_ways@h 609 ori %r4, %r4, tlb0_ways@l 610 lwz %r4, 0(%r4) 611 612 /* Number of entries / way */ 613 lis %r5, tlb0_entries_per_way@h 614 ori %r5, %r5, tlb0_entries_per_way@l 615 lwz %r5, 0(%r5) 616 617 /* Disable interrupts */ 618 mfmsr %r10 619 wrteei 0 620 621 li %r6, 0 /* ways counter */ 622loop_ways: 623 li %r7, 0 /* entries [per way] counter */ 624loop_entries: 625 /* Select TLB0 and ESEL (way) */ 626 lis %r8, MAS0_TLBSEL0@h 627 rlwimi %r8, %r6, 16, 14, 15 628 mtspr SPR_MAS0, %r8 629 isync 630 631 /* Select EPN (entry within the way) */ 632 rlwinm %r8, %r7, 12, 13, 19 633 mtspr SPR_MAS2, %r8 634 isync 635 tlbre 636 637 /* Check if valid entry */ 638 mfspr %r8, SPR_MAS1 639 andis. %r9, %r8, MAS1_VALID@h 640 beq next_entry /* invalid entry */ 641 642 /* Check if this is our TID */ 643 rlwinm %r9, %r8, 16, 24, 31 644 645 cmplw %r9, %r3 646 bne next_entry /* not our TID */ 647 648 /* Clear VALID bit */ 649 rlwinm %r8, %r8, 0, 1, 31 650 mtspr SPR_MAS1, %r8 651 isync 652 tlbwe 653 isync 654 msync 655 656next_entry: 657 addi %r7, %r7, 1 658 cmpw %r7, %r5 659 bne loop_entries 660 661 /* Next way */ 662 addi %r6, %r6, 1 663 cmpw %r6, %r4 664 bne loop_ways 665 666 /* Restore MSR (possibly re-enable interrupts) */ 667 mtmsr %r10 668 isync 669 670tid_flush_end: 671 blr 672 673/* 674 * Cache disable/enable/inval sequences according 675 * to section 2.16 of E500CORE RM. 676 */ 677ENTRY(dcache_inval) 678 /* Invalidate d-cache */ 679 mfspr %r3, SPR_L1CSR0 680 ori %r3, %r3, (L1CSR0_DCFI | L1CSR0_DCLFR)@l 681 msync 682 isync 683 mtspr SPR_L1CSR0, %r3 684 isync 6851: mfspr %r3, SPR_L1CSR0 686 andi. %r3, %r3, L1CSR0_DCFI 687 bne 1b 688 blr 689 690ENTRY(dcache_disable) 691 /* Disable d-cache */ 692 mfspr %r3, SPR_L1CSR0 693 li %r4, L1CSR0_DCE@l 694 not %r4, %r4 695 and %r3, %r3, %r4 696 msync 697 isync 698 mtspr SPR_L1CSR0, %r3 699 isync 700 blr 701 702ENTRY(dcache_enable) 703 /* Enable d-cache */ 704 mfspr %r3, SPR_L1CSR0 705 oris %r3, %r3, (L1CSR0_DCPE | L1CSR0_DCE)@h 706 ori %r3, %r3, (L1CSR0_DCPE | L1CSR0_DCE)@l 707 msync 708 isync 709 mtspr SPR_L1CSR0, %r3 710 isync 711 blr 712 713ENTRY(icache_inval) 714 /* Invalidate i-cache */ 715 mfspr %r3, SPR_L1CSR1 716 ori %r3, %r3, (L1CSR1_ICFI | L1CSR1_ICLFR)@l 717 isync 718 mtspr SPR_L1CSR1, %r3 719 isync 7201: mfspr %r3, SPR_L1CSR1 721 andi. %r3, %r3, L1CSR1_ICFI 722 bne 1b 723 blr 724 725ENTRY(icache_disable) 726 /* Disable i-cache */ 727 mfspr %r3, SPR_L1CSR1 728 li %r4, L1CSR1_ICE@l 729 not %r4, %r4 730 and %r3, %r3, %r4 731 isync 732 mtspr SPR_L1CSR1, %r3 733 isync 734 blr 735 736ENTRY(icache_enable) 737 /* Enable i-cache */ 738 mfspr %r3, SPR_L1CSR1 739 oris %r3, %r3, (L1CSR1_ICPE | L1CSR1_ICE)@h 740 ori %r3, %r3, (L1CSR1_ICPE | L1CSR1_ICE)@l 741 isync 742 mtspr SPR_L1CSR1, %r3 743 isync 744 blr 745 746/* 747 * int setfault() 748 * 749 * Similar to setjmp to setup for handling faults on accesses to user memory. 750 * Any routine using this may only call bcopy, either the form below, 751 * or the (currently used) C code optimized, so it doesn't use any non-volatile 752 * registers. 753 */ 754 .globl setfault 755setfault: 756 mflr %r0 757 mfsprg0 %r4 758 lwz %r4, PC_CURTHREAD(%r4) 759 lwz %r4, TD_PCB(%r4) 760 stw %r3, PCB_ONFAULT(%r4) 761 mfcr %r10 762 mfctr %r11 763 mfxer %r12 764 stw %r0, 0(%r3) 765 stw %r1, 4(%r3) 766 stw %r2, 8(%r3) 767 stmw %r10, 12(%r3) /* store CR, CTR, XER, [r13 .. r31] */ 768 li %r3, 0 /* return FALSE */ 769 blr 770 771/************************************************************************/ 772/* Data section */ 773/************************************************************************/ 774 .data 775 .align 4 776tmpstack: 777 .space TMPSTACKSZ 778 779/* 780 * Compiled KERNBASE locations 781 */ 782 .globl kernbase 783 .set kernbase, KERNBASE 784 785/* 786 * Globals 787 */ 788#define INTRCNT_COUNT 256 /* max(HROWPIC_IRQMAX,OPENPIC_IRQMAX) */ 789 790GLOBAL(kernload) 791 .long 0 792GLOBAL(intrnames) 793 .space INTRCNT_COUNT * (MAXCOMLEN + 1) * 2 794GLOBAL(eintrnames) 795 .align 4 796GLOBAL(intrcnt) 797 .space INTRCNT_COUNT * 4 * 2 798GLOBAL(eintrcnt) 799 800#include <powerpc/booke/trap_subr.S> 801