GENERIC revision 60027
1# 2# GENERIC -- Generic kernel configuration file for FreeBSD/pc98 3# 4# For more information on this file, please read the handbook section on 5# Kernel Configuration Files: 6# 7# http://www.freebsd.org/handbook/kernelconfig-config.html 8# 9# The handbook is also available locally in /usr/share/doc/handbook 10# if you've installed the doc distribution, otherwise always see the 11# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the 12# latest information. 13# 14# An exhaustive list of options and more detailed explanations of the 15# device lines is also present in the ./LINT configuration file. If you are 16# in doubt as to the purpose or necessity of a line, check first in LINT. 17# 18# $FreeBSD: head/sys/pc98/conf/GENERIC 60027 2000-05-05 08:03:31Z nyan $ 19 20machine pc98 21cpu I386_CPU 22cpu I486_CPU 23cpu I586_CPU 24cpu I686_CPU 25ident GENERIC 26maxusers 32 27 28#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 29 30options PC98 #PC98 31options MATH_EMULATE #Support for x87 emulation 32options INET #InterNETworking 33options INET6 #IPv6 communications protocols 34options FFS #Berkeley Fast Filesystem 35options FFS_ROOT #FFS usable as root device [keep this!] 36options MFS #Memory Filesystem 37options MD_ROOT #MD is a potential root device 38options NFS #Network Filesystem 39options NFS_ROOT #NFS usable as root device, NFS required 40options MSDOSFS #MSDOS Filesystem 41options CD9660 #ISO 9660 Filesystem 42options CD9660_ROOT #CD-ROM usable as root, CD9660 required 43options PROCFS #Process filesystem 44options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 45options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI 46options EPSON_BOUNCEDMA #use bounce buufer for 15-16M 47#options EPSON_MEMWIN #EPSON memory window support 48options UCONSOLE #Allow users to grab the console 49#options LINE30 50options USERCONFIG #boot -c editor 51options VISUAL_USERCONFIG #visual boot -c editor 52options KTRACE #ktrace(1) support 53options SYSVSHM #SYSV-style shared memory 54options SYSVMSG #SYSV-style message queues 55options SYSVSEM #SYSV-style semaphores 56options P1003_1B #Posix P1003_1B real-time extensions 57options _KPOSIX_PRIORITY_SCHEDULING 58options ICMP_BANDLIM #Rate limit bad replies 59 60# To make an SMP kernel, the next two are needed 61#options SMP # Symmetric MultiProcessor Kernel 62#options APIC_IO # Symmetric (APIC) I/O 63# Optionally these may need tweaked, (defaults shown): 64#options NCPU=2 # number of CPUs 65#options NBUS=4 # number of busses 66#options NAPIC=1 # number of IO APICs 67#options NINTR=24 # number of INTs 68 69device isa 70device pci 71options COMPAT_OLDISA # Old ISA driver shims 72options COMPAT_OLDPCI # Old PCI driver shims 73 74# Floppy drives 75device fdc0 at isa? port IO_FD1 irq 11 drq 2 76device fd0 at fdc0 drive 0 77device fd1 at fdc0 drive 1 78device fd2 at fdc0 drive 2 79device fd3 at fdc0 drive 3 80 81# IDE controller and disks 82device wdc0 at isa? port IO_WD1 irq 9 83device wd0 at wdc0 drive 0 84#device wd1 at wdc0 drive 1 85#device wd2 at wdc0 drive 2 86#device wd3 at wdc0 drive 3 87 88# ATAPI devices on wdc 89device wcd #IDE CD-ROM 90#device wfd #IDE Floppy (e.g. LS-120) 91#device wst #IDE Tape (e.g. Travan) 92 93# SCSI Controllers 94device adv 95device ahc # AHA2940 and onboard AIC7xxx devices 96device amd # AMD 53C974 (Teckram DC-390(T)) 97device isp # Qlogic family 98device ncr # NCR/Symbios Logic 99device sym # NCR/Symbios Logic (newer chipsets) 100 101# 102# WD33C93 SCSI card (55/92 like board) 103# 104 105options BS_TARG_SAFEMODE 106 107# PC-9801-92 108device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0 109# SC-98 110# device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000 111# HA-55BS2 and later 112#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000 113# ELECOM type 114#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000 115# SMIT 116#device bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 117# Logitec LHA-20x 118#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000 119 120# PC-9801-100 121device aic0 at isa? port 0x1840 irq 5 flags 0x10000 122 123# SCSI peripherals 124device scbus # SCSI bus (required) 125device da # Direct Access (disks) 126device sa # Sequential Access (tape etc) 127device cd # CD 128device pass # Passthrough device (direct SCSI access) 129 130# RAID controllers 131device amr # AMI MegaRAID 132device mlx # Mylex DAC960 family 133 134# keyboard driver 135device pckbd0 at isa? port IO_KBD irq 1 136#options KBD_INSTALL_CDEV 137 138device gdc0 at isa? 139 140# splash screen/screen saver 141pseudo-device splash 142 143# syscons is the default console driver, resembling an SCO console 144device sc0 at isa? 145 146# Floating point support - do not disable. 147device npx0 at nexus? port IO_NPX irq 8 148 149# Power management support (see LINT for more options) 150#device apm0 at nexus? disable flags 0x20 # Advanced Power Management 151 152# PCCARD (PCMCIA) support 153device card 154device pcic0 at isa? irq 6 port 0x3e0 155 156# Serial (COM) ports 157# 158options COM_MULTIPORT 159# 160# COM1 161device sio0 at isa? port IO_COM1 irq 4 162# COM2 (2nd CCU) 163device sio1 at isa? port 0x238 irq 5 flags 0x12000010 164# PC-9861K, PC-9801-101, MDC-926Rs 165#device sio1 at isa? port IO_COM2 irq 5 flags 0x01000000 166#device sio2 at isa? port IO_COM3 irq 6 flags 0x02000000 167# PC-9801-120 (PnP off) 168#device sio1 at isa? port 0x8b0 irq 5 flags 0x11000000 169# MC-16550II, MC-RS98 170#device sio1 at isa? port 0xd2 irq 5 flags 0x14000101 171#device sio2 at isa? port 0x8d2 flags 0x14000101 172# RSB-2000, RSB-3000, B98-02 173#device sio1 at isa? port 0xb0 flags 0x15000101 174#device sio2 at isa? port 0xb1 flags 0x15000101 175# RSB-384 176#device sio1 at isa? port 0xb0 flags 0x16000000 177#device sio2 at isa? port 0xb1 flags 0x16000000 178# RSA-98III 179#device sio1 at isa? port 0x50e0 irq 5 flags 0x18000101 180#device sio2 at isa? port 0x51e0 flags 0x18000101 181# ESP98 182#options COM_ESP 183#device sio1 at isa? port 0x18b0 irq 5 flags 0x19000000 184 185device mse0 at isa? port IO_MSE irq 13 186 187# NEW Parallel port 188device ppc0 at isa? irq 14 189device ppbus # Parallel port bus (required) 190device lpt # Printer 191device plip # TCP/IP over parallel 192device ppi # Parallel port interface device 193#device vpo # Requires scbus and da 194# OLD Parallel port 195# Please stay olpt driver after ppc driver 196device olpt0 at isa? port IO_LPT 197 198 199# PCI Ethernet NICs. 200device de # DEC/Intel DC21x4x (``Tulip'') 201device fxp # Intel EtherExpress PRO/100B (82557, 82558) 202device tx # SMC 9432TX (83c170 ``EPIC'') 203device vx # 3Com 3c590, 3c595 (``Vortex'') 204device wx # Intel Gigabit Ethernet Card (``Wiseman'') 205 206# PCI Ethernet NICs that use the common MII bus controller code. 207device miibus # MII bus support 208device dc # DEC/Intel 21143 and various workalikes 209device rl # RealTek 8129/8139 210device sf # Adaptec AIC-6915 (``Starfire'') 211device sis # Silicon Integrated Systems SiS 900/SiS 7016 212device ste # Sundance ST201 (D-Link DFE-550TX) 213device tl # Texas Instruments ThunderLAN 214device vr # VIA Rhine, Rhine II 215device wb # Winbond W89C840F 216device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 217 218# ISA Ethernet NICs. 219# 220# DP8390 NIC 221# 222# ed0: generic driver/EtherEZ98 223# ed1: LANEED LD-BDN 224# ed2: EGY-98 225# ed3: LGY-98 226# ed4: ICM-IF-2766/EN-2298-T 227# ed5: SIC-98 228# ed6: PC-9801-108 229# ed7: LA-98 230# ed8: C-NET(98) 231# ed9: C-NET(98)E/L 232# ed10: EC/EP-98X 233# ed11: SIU-98-D 234# 235#device ed0 at isa? port 0x00d0 irq 6 236##device ed0 at isa? port 0x10d0 irq 6 iomem 0xc8000 # SMC EtherEZ98 237#device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 238#device ed1 at isa? port 0x00d8 irq 6 flags 0x200000 239#device ed3 at isa? port 0x00d0 irq 6 flags 0x400000 240#device ed4 at isa? port 0x56d0 irq 5 flags 0x500000 241#device ed2 at isa? port 0x00d8 irq 6 flags 0x300000 242#device ed7 at isa? port 0x00d0 irq 6 flags 0x900000 243#device ed6 at isa? port 0x0770 irq 6 flags 0x800000 244#device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000 245#device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 246#device ed10 at isa? port 0x00d0 irq 3 flags 0xd10000 247#device ed11 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 32768 flags 0x610000 248# 249# MB86960A NIC 250# 251# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98 252# fe1: C-NET(98)P2/C-NET(9N)E 253# 254# FE_8BIT_SUPPORT is needed to support LAC-98 255# 256options FE_8BIT_SUPPORT # LAC-98 support 257device fe0 at isa? port 0x00d0 irq 3 258device fe1 at isa? port 0x73d0 irq 5 259 260device ep0 at isa? port 0x40d0 irq 3 261device lnc0 at isa? port 0x03d0 irq 6 262 263# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 264# exists only as a PCMCIA device, so there is no ISA attatement needed 265# and resources will always be dynamically assigned by the pccard code. 266device wi 267 268# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 269# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 270# mode (the factory default). If you set the switches on your ISA 271# card for a manually chosen I/O address and IRQ, you must specify 272# those paremeters here. 273device an 274 275# requires PCCARD (PCMCIA) support to be activated 276device sn 277#device xe0 at isa? 278 279#device snd 280#device sb0 at isa? port 0x20d2 irq 10 drq 3 281#device sbxvi0 at isa? drq 3 282#device sbmidi0 at isa? port 0x80d2 283#device opl0 at isa? port 0x28d2 284#device nss0 at isa? port 0xa460 irq 12 285#device mss0 at isa? port 0xf40 irq 12 drq 1 286#device mpu0 at isa? port 0xe0d0 irq 6 287 288#device joy0 at isa? port 0x04d2 289 290# Pseudo devices - the number indicates how many units to allocated. 291pseudo-device loop # Network loopback 292pseudo-device ether # Ethernet support 293pseudo-device sl 1 # Kernel SLIP 294pseudo-device ppp 1 # Kernel PPP 295pseudo-device tun # Packet tunnel. 296pseudo-device pty # Pseudo-ttys (telnet etc) 297pseudo-device md # Memory "disks" 298pseudo-device gif 4 # IPv6 and IPv4 tunneling 299pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 300 301# The `bpf' pseudo-device enables the Berkeley Packet Filter. 302# Be aware of the administrative consequences of enabling this! 303pseudo-device bpf #Berkeley packet filter 304 305#pseudo-device compat_atdisk #IBM-PC HDD support 306 307# USB support 308#device uhci # UHCI PCI->USB interface 309#device ohci # OHCI PCI->USB interface 310#device usb # USB Bus (required) 311#device ugen # Generic 312#device uhid # "Human Interface Devices" 313#device ukbd # Keyboard 314#device ulpt # Printer 315#device umass # Disks/Mass storage - Requires scbus and da 316#device ums # Mouse 317# USB Ethernet, requires mii 318#device aue # ADMtek USB ethernet 319#device cue # CATC USB ethernet 320#device kue # Kawasaki LSI USB ethernet 321