GENERIC revision 58161
1#
2# GENERIC -- Generic kernel configuration file for FreeBSD/pc98
3#
4# For more information on this file, please read the handbook section on
5# Kernel Configuration Files:
6#
7#    http://www.freebsd.org/handbook/kernelconfig-config.html
8#
9# The handbook is also available locally in /usr/share/doc/handbook
10# if you've installed the doc distribution, otherwise always see the
11# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
12# latest information.
13#
14# An exhaustive list of options and more detailed explanations of the
15# device lines is also present in the ./LINT configuration file. If you are
16# in doubt as to the purpose or necessity of a line, check first in LINT.
17#
18# $FreeBSD: head/sys/pc98/conf/GENERIC 58161 2000-03-17 11:37:03Z nyan $
19
20machine		pc98
21cpu		I386_CPU
22cpu		I486_CPU
23cpu		I586_CPU
24cpu		I686_CPU
25ident		GENERIC98
26maxusers	32
27
28#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
29
30options 	PC98			#PC98
31options 	MATH_EMULATE		#Support for x87 emulation
32options 	INET			#InterNETworking
33options 	INET6			#IPv6 communications protocols
34options 	FFS			#Berkeley Fast Filesystem
35options 	FFS_ROOT		#FFS usable as root device [keep this!]
36options 	MFS			#Memory Filesystem
37options 	MD_ROOT			#MD is a potential root device
38options 	NFS			#Network Filesystem
39options 	NFS_ROOT		#NFS usable as root device, NFS required
40options 	MSDOSFS			#MSDOS Filesystem
41options 	CD9660			#ISO 9660 Filesystem
42options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
43options 	PROCFS			#Process filesystem
44options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
45options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
46options 	EPSON_BOUNCEDMA		#use bounce buufer for 15-16M
47#options 	EPSON_MEMWIN		#EPSON memory window support
48options 	UCONSOLE		#Allow users to grab the console
49#options 	LINE30
50options 	USERCONFIG		#boot -c editor
51options 	VISUAL_USERCONFIG	#visual boot -c editor
52options 	KTRACE			#ktrace(1) support
53options 	SYSVSHM			#SYSV-style shared memory
54options 	SYSVMSG			#SYSV-style message queues
55options 	SYSVSEM			#SYSV-style semaphores
56options 	P1003_1B		#Posix P1003_1B real-time extentions
57options 	_KPOSIX_PRIORITY_SCHEDULING
58options		ICMP_BANDLIM		#Rate limit bad replies
59
60# To make an SMP kernel, the next two are needed
61#options 	SMP			# Symmetric MultiProcessor Kernel
62#options 	APIC_IO			# Symmetric (APIC) I/O
63# Optionally these may need tweaked, (defaults shown):
64#options 	NCPU=2			# number of CPUs
65#options 	NBUS=4			# number of busses
66#options 	NAPIC=1			# number of IO APICs
67#options 	NINTR=24		# number of INTs
68
69device		isa
70device		pci
71
72# Floppy drives
73device		fdc0	at isa? port IO_FD1 irq 11 drq 2
74device		fd0	at fdc0 drive 0
75device		fd1	at fdc0 drive 1
76device		fd2	at fdc0 drive 2
77device		fd3	at fdc0 drive 3
78
79# IDE controller and disks
80device		wdc0	at isa? port IO_WD1 irq 9
81device		wd0	at wdc0 drive 0
82#device		wd1	at wdc0 drive 1
83#device		wd2	at wdc0 drive 2
84#device		wd3	at wdc0 drive 3
85
86# ATAPI devices on wdc
87device		wcd		#IDE CD-ROM
88#device		wfd		#IDE Floppy (e.g. LS-120)
89#device		wst		#IDE Tape (e.g. Travan)
90
91# SCSI Controllers
92device		adv
93device		ahc		# AHA2940 and onboard AIC7xxx devices
94device		amd		# AMD 53C974 (Teckram DC-390(T))
95device		isp		# Qlogic family
96device		ncr		# NCR/Symbios Logic
97device		sym		# NCR/Symbios Logic (newer chipsets)
98
99#
100# WD33C93 SCSI card (55/92 like board)
101#
102
103options	BS_TARG_SAFEMODE
104
105# PC-9801-92
106device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0
107# SC-98
108# device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000
109# HA-55BS2 and later
110#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000
111# ELECOM type
112#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000
113# SMIT
114#device bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000
115# Logitec LHA-20x
116#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000
117
118# SCSI peripherals
119device		scbus		# SCSI bus (required)
120device		da		# Direct Access (disks)
121device		sa		# Sequential Access (tape etc)
122device		cd		# CD
123device		pass		# Passthrough device (direct SCSI access)
124
125# RAID controllers
126device		amr		# AMI MegaRAID
127device		mlx		# Mylex DAC960 family
128
129# keyboard driver
130device		pckbd0	at isa? port IO_KBD irq 1
131#options 	KBD_INSTALL_CDEV
132
133device		gdc0	at isa?
134
135# splash screen/screen saver
136pseudo-device	splash
137
138# syscons is the default console driver, resembling an SCO console
139device		sc0	at isa?
140
141# Floating point support - do not disable.
142device		npx0	at nexus? port IO_NPX irq 8
143
144# Power management support (see LINT for more options)
145device		apm0    at nexus? disable flags 0x20 # Advanced Power Management
146
147# PCCARD (PCMCIA) support
148device		card
149device		pcic0	at isa? irq 6 port 0x3e0
150
151# Serial (COM) ports
152#
153options 	COM_MULTIPORT
154#
155# COM1
156device		sio0	at isa? port IO_COM1 irq 4
157# COM2 (2nd CCU)
158device		sio1	at isa? port 0x238 irq 5 flags 0x12000010
159# PC-9861K, PC-9801-101, MDC-926Rs
160#device		sio1	at isa? port IO_COM2 irq 5 flags 0x01000000
161#device		sio2	at isa? port IO_COM3 irq 6 flags 0x02000000
162# PC-9801-120 (PnP off)
163#device		sio1	at isa? port 0x8b0 irq 5 flags 0x11000000
164# MC-16550II, MC-RS98
165#device		sio1	at isa? port 0xd2 irq 5 flags 0x14000101
166#device		sio2	at isa? port 0x8d2 flags 0x14000101
167# RSB-2000, RSB-3000, B98-02
168#device		sio1	at isa? port 0xb0 flags 0x15000101
169#device		sio2	at isa? port 0xb1 flags 0x15000101
170# RSB-384
171#device		sio1	at isa? port 0xb0 flags 0x16000000
172#device		sio2	at isa? port 0xb1 flags 0x16000000
173# RSA-98III
174#device		sio1	at isa? port 0x50e0 irq 5 flags 0x18000101
175#device		sio2	at isa? port 0x51e0 flags 0x18000101
176# ESP98
177#options 	COM_ESP
178#device		sio1	at isa? port 0x18b0 irq 5 flags 0x19000000
179
180device		mse0	at isa? port IO_MSE irq 13
181
182# NEW Parallel port
183device		ppc0	at isa? irq 14
184device		ppbus		# Parallel port bus (required)
185device		lpt		# Printer
186device		plip		# TCP/IP over parallel
187device		ppi		# Parallel port interface device
188#device		vpo		# Requires scbus and da
189# OLD Parallel port
190# Please stay olpt driver after ppc driver
191device		olpt0	at isa? port IO_LPT
192
193
194# PCI Ethernet NICs.
195device		de		# DEC/Intel DC21x4x (``Tulip'')
196device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
197device		tx		# SMC 9432TX (83c170 ``EPIC'')
198device		vx		# 3Com 3c590, 3c595 (``Vortex'')
199device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')
200
201# PCI Ethernet NICs that use the common MII bus controller code.
202device		miibus		# MII bus support
203device		dc		# DEC/Intel 21143 and various workalikes
204device		rl		# RealTek 8129/8139
205device		sf		# Adaptec AIC-6915 (``Starfire'')
206device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
207device		ste		# Sundance ST201 (D-Link DFE-550TX)
208device		tl		# Texas Instruments ThunderLAN
209device		vr		# VIA Rhine, Rhine II
210device		wb		# Winbond W89C840F
211device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
212
213# ISA Ethernet NICs.
214#
215# DP8390 NIC
216#
217# ed0: generic driver/EtherEZ98
218# ed1: LANEED LD-BDN
219# ed2: EGY-98
220# ed3: LGY-98
221# ed4: ICM-IF-2766/EN-2298-T
222# ed5: SIC-98
223# ed6: PC-9801-108
224# ed7: LA-98
225# ed8: C-NET(98)
226# ed9: C-NET(98)E/L
227# ed10: EC/EP-98X
228# ed11: SIU-98-D
229#
230#device ed0 at isa? port 0x00d0 irq 6
231##device ed0 at isa? port 0x10d0 irq 6 iomem 0xc8000    # SMC EtherEZ98
232#device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000
233#device ed1 at isa? port 0x00d8 irq 6 flags 0x200000
234#device ed3 at isa? port 0x00d0 irq 6 flags 0x400000
235#device ed4 at isa? port 0x56d0 irq 5 flags 0x500000
236#device ed2 at isa? port 0x00d8 irq 6 flags 0x300000
237#device ed7 at isa? port 0x00d0 irq 6 flags 0x900000
238#device ed6 at isa? port 0x0770 irq 6 flags 0x800000
239#device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000
240#device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000
241#device ed10 at isa? port 0x00d0 irq 3 flags 0xd10000
242#device ed11 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 32768 flags 0x610000
243#
244# MB86960A NIC
245#
246# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98
247# fe1: C-NET(98)P2/C-NET(9N)E
248#
249# FE_8BIT_SUPPORT is needed to support LAC-98
250#
251options 	FE_8BIT_SUPPORT		# LAC-98 support
252device		fe0	at isa? port 0x00d0 irq 3
253device		fe1	at isa? port 0x73d0 irq 5
254
255device		ep0	at isa? port 0x40d0 irq 3
256device		lnc0	at isa? port 0x03d0 irq 6
257
258# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
259# exists only as a PCMCIA device, so there is no ISA attatement needed
260# and resources will always be dynamically assigned by the pccard code.
261device		wi
262
263# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
264# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
265# mode (the factory default). If you set the switches on your ISA
266# card for a manually chosen I/O address and IRQ, you must specify
267# those paremeters here.
268device		an
269
270# requires PCCARD (PCMCIA) support to be activated
271device		sn
272#device		xe0	at isa?
273
274#device	snd
275#device	sb0	at isa? port 0x20d2 irq 10 drq 3
276#device	sbxvi0 	at isa? drq 3
277#device	sbmidi0	at isa? port 0x80d2
278#device	opl0	at isa? port 0x28d2
279#device	nss0	at isa? port 0xa460 irq 12
280#device	mss0	at isa? port 0xf40 irq 12 drq 1
281#device	mpu0	at isa? port 0xe0d0 irq 6
282
283# Pseudo devices - the number indicates how many units to allocated.
284pseudo-device	loop		# Network loopback
285pseudo-device	ether		# Ethernet support
286pseudo-device	sl	1	# Kernel SLIP
287pseudo-device	ppp	1	# Kernel PPP
288pseudo-device	tun		# Packet tunnel.
289pseudo-device	pty		# Pseudo-ttys (telnet etc)
290pseudo-device	md		# Memory "disks"
291pseudo-device	gif	4	# IPv6 and IPv4 tunneling
292pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)
293
294# The `bpf' pseudo-device enables the Berkeley Packet Filter.
295# Be aware of the administrative consequences of enabling this!
296pseudo-device	bpf		#Berkeley packet filter
297
298#pseudo-device	compat_atdisk	#IBM-PC HDD support
299
300# USB support
301#device		uhci		# UHCI PCI->USB interface
302#device		ohci		# OHCI PCI->USB interface
303#device		usb		# USB Bus (required)
304#device		ugen		# Generic
305#device		uhid		# "Human Interface Devices"
306#device		ukbd		# Keyboard
307#device		ulpt		# Printer
308#device		umass		# Disks/Mass storage - Requires scbus and da
309#device		ums		# Mouse
310# USB Ethernet, requires mii
311#device		aue		# ADMtek USB ethernet
312#device		cue		# CATC USB ethernet
313#device		kue		# Kawasaki LSI USB ethernet
314