GENERIC revision 54406
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information on this file, please read the handbook section on 5# Kernel Configuration Files: 6# 7# http://www.freebsd.org/handbook/kernelconfig-config.html 8# 9# The handbook is also available locally in /usr/share/doc/handbook 10# if you've installed the doc distribution, otherwise always see the 11# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the 12# latest information. 13# 14# An exhaustive list of options and more detailed explanations of the 15# device lines is also present in the ./LINT configuration file. If you are 16# in doubt as to the purpose or necessity of a line, check first in LINT. 17# 18# $FreeBSD: head/sys/pc98/conf/GENERIC 54406 1999-12-10 14:02:48Z kato $ 19 20# GENERIC98 -- Generic PC98 machine with WD/SCSI disks 21 22machine pc98 23cpu I386_CPU 24cpu I486_CPU 25cpu I586_CPU 26cpu I686_CPU 27ident GENERIC98 28maxusers 32 29 30#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 31 32options PC98 #PC98 33options MATH_EMULATE #Support for x87 emulation 34options INET #InterNETworking 35options FFS #Berkeley Fast Filesystem 36options FFS_ROOT #FFS usable as root device [keep this!] 37options MD_ROOT #MD is a potential root device 38options MFS #Memory Filesystem 39options NFS #Network Filesystem 40options NFS_ROOT #NFS usable as root device, "NFS" req'ed 41options MSDOSFS #MSDOS Filesystem 42options CD9660 #ISO 9660 Filesystem 43options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed 44options PROCFS #Process filesystem 45options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 46options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 47options EPSON_BOUNCEDMA #use bounce buufer for 15-16M 48#options EPSON_MEMWIN #EPSON memory window support 49options UCONSOLE #Allow users to grab the console 50#options LINE30 51options USERCONFIG #boot -c editor 52options VISUAL_USERCONFIG #visual boot -c editor 53options KTRACE #ktrace(1) syscall trace support 54options SYSVSHM #SYSV-style shared memory 55options SYSVMSG #SYSV-style message queues 56options SYSVSEM #SYSV-style semaphores 57 58# To make an SMP kernel, the next two are needed 59#options SMP # Symmetric MultiProcessor Kernel 60#options APIC_IO # Symmetric (APIC) I/O 61# Optionally these may need tweaked, (defaults shown): 62#options NCPU=2 # number of CPUs 63#options NBUS=4 # number of busses 64#options NAPIC=1 # number of IO APICs 65#options NINTR=24 # number of INTs 66 67controller isa0 68controller pci0 69 70# Floppy drives 71controller fdc0 at isa? port IO_FD1 irq 11 drq 2 72device fd0 at fdc0 drive 0 73device fd1 at fdc0 drive 1 74device fd2 at fdc0 drive 2 75device fd3 at fdc0 drive 3 76 77# IDE controller and disks 78controller wdc0 at isa? port IO_WD1 irq 9 79device wd0 at wdc0 drive 0 80#device wd1 at wdc0 drive 1 81#device wd2 at wdc0 drive 2 82#device wd3 at wdc0 drive 3 83 84# ATAPI devices on wdc? 85device wcd0 #IDE CD-ROM 86#device wfd0 #IDE Floppy (e.g. LS-120) 87#device wst0 #IDE Tape (e.g. Travan) 88 89# SCSI Controllers 90# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is 91# sufficient for any number of installed devices. 92controller adv0 93controller ahc0 # AHA2940 and onboard AIC7xxx devices 94controller amd0 # AMD 53C974 (Teckram DC-390(T)) 95controller isp0 # Qlogic family 96controller ncr0 # NCR/Symbios Logic 97#controller sym0 # NCR/Symbios Logic (do not mix with ncr, it conflicts) 98 99# 100# WD33C93 SCSI card (55/92 like board) 101# 102 103options BS_TARG_SAFEMODE 104 105# PC-9801-92 106controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0 107# SC-98 108# controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000 109# HA-55BS2 and later 110#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000 111# ELECOM type 112#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000 113# SMIT 114#controller bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 115# Logitec LHA-20x 116#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000 117 118# SCSI peripherals 119# Only one of each of these is needed, they are dynamically allocated. 120controller scbus0 # SCSI bus (required) 121device da0 # Direct Access (disks) 122device sa0 # Sequential Access (tape etc) 123device cd0 # CD 124device pass0 # Passthrough device (direct SCSI access) 125 126# RAID controllers 127device amr0 # AMI MegaRAID 128device mlx0 # Mylex DAC960 family 129 130# Proprietary or custom CD-ROM Interfaces 131device matcd0 at isa? port? 132 133# keyboard driver 134device pckbd0 at isa? port IO_KBD irq 1 135#options KBD_INSTALL_CDEV 136 137device gdc0 at isa? 138 139# splash screen/screen saver 140pseudo-device splash 141 142# syscons is the default console driver, resembling an SCO console 143device sc0 at isa? 144 145# Floating point support - do not disable. 146device npx0 at nexus? port IO_NPX irq 8 147 148# Power management support (see LINT for more options) 149device apm0 at nexus? disable flags 0x20 # Advanced Power Management 150 151# PCCARD (PCMCIA) support 152#controller card0 153#device pcic0 at isa? 154#device pcic1 at isa? 155 156# Serial (COM) ports 157# 158options COM_MULTIPORT 159# 160# COM1 161device sio0 at isa? port IO_COM1 irq 4 162# COM2 (2nd CCU) 163device sio1 at isa? port 0x238 irq 5 flags 0x12000000 164# PC-9861K, PC-9801-101, MDC-926Rs 165#device sio1 at isa? port IO_COM2 irq 5 flags 0x01000000 166#device sio2 at isa? port IO_COM3 irq 6 flags 0x02000000 167# PC-9801-120 (PnP off) 168#device sio1 at isa? port 0x8b0 irq 5 flags 0x11000000 169# MC-16550II, MC-RS98 170#device sio1 at isa? port 0xd2 irq 5 flags 0x14000101 171#device sio2 at isa? port 0x8d2 flags 0x14000101 172# RSB-2000, RSB-3000, B98-02 173#device sio1 at isa? port 0xb0 flags 0x15000101 174#device sio2 at isa? port 0xb1 flags 0x15000101 175# RSB-384 176#device sio1 at isa? port 0xb0 flags 0x16000000 177#device sio2 at isa? port 0xb1 flags 0x16000000 178# RSA-98III 179#device sio1 at isa? port 0x50e0 irq 5 flags 0x18000101 180#device sio2 at isa? port 0x51e0 flags 0x18000101 181# ESP98 182#options COM_ESP 183#device sio1 at isa? port 0x18b0 irq 5 flags 0x19000000 184 185device mse0 at isa? port IO_MSE irq 13 186 187# NEW Parallel port 188device ppc0 at isa? port? irq 14 189controller ppbus0 # Parallel port bus (required) 190device lpt0 # Printer 191device plip0 # TCP/IP over parallel 192device ppi0 # Parallel port interface device 193#controller vpo0 # Requires scbus and da0 194# OLD Parallel port 195# Please stay olpt driver after ppc driver 196device olpt0 at isa? port IO_LPT 197 198 199# PCI Ethernet NICs. 200device de0 # DEC/Intel DC21x4x (``Tulip'') 201device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) 202device tx0 # SMC 9432TX (83c170 ``EPIC'') 203device vx0 # 3Com 3c590, 3c595 (``Vortex'') 204 205# PCI Ethernet NICs that use the common MII bus controller code. 206controller miibus0 # MII bus support 207device dc0 # DEC/Intel 21143 and workalikes 208device rl0 # RealTek 8129/8139 209device sf0 # Adaptec AIC-6915 (``Starfire'') 210device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 211device ste0 # Sundance ST201 (D-Link DFE-550TX) 212device tl0 # Texas Instruments ThunderLAN 213device vr0 # VIA Rhine, Rhine II 214device wb0 # Winbond W89C840F 215device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') 216 217# ISA Ethernet NICs. 218# 219# DP8390 NIC 220# 221# ed0: generic driver 222# ed1: LANEED LD-BDN 223# ed2: EGY-98 224# ed3: LGY-98 225# ed4: ICM-IF-2766/EN-2298-T 226# ed5: SIC-98 227# ed6: PC-9801-108 228# ed7: LA-98 229# ed8: C-NET(98) 230# ed9: C-NET(98)E/L 231# 232# MB86960A NIC 233# 234# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98 235# fe1: C-NET(98)P2/C-NET(9N)E 236# 237# FE_8BIT_SUPPORT is needed to support LAC-98 238# 239#device ed0 at isa? port 0x00d0 irq 6 240#device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 241#device ed1 at isa? port 0x00d8 irq 6 flags 0x200000 242#device ed3 at isa? port 0x00d0 irq 6 flags 0x400000 243#device ed4 at isa? port 0x56d0 irq 5 flags 0x500000 244#device ed2 at isa? port 0x00d8 irq 6 flags 0x300000 245#device ed7 at isa? port 0x00d0 irq 6 flags 0x900000 246#device ed6 at isa? port 0x0770 irq 6 flags 0x800000 247#device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000 248#device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 249device ep0 at isa? port 0x40d0 irq 3 250device fe0 at isa? port 0x00d0 irq 3 251device fe1 at isa? port 0x73d0 irq 5 252device lnc0 at isa? port 0x03d0 irq 6 253 254options FE_8BIT_SUPPORT # LAC-98 support 255 256#controller snd0 257#device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3 258#device sbxvi0 at isa? drq 3 259#device sbmidi0 at isa? port 0x80d2 260#device opl0 at isa? port 0x28d2 261#device nss0 at isa? port 0xa460 irq 12 262#device mss0 at isa? port 0xf40 irq 12 drq 1 263#device mpu0 at isa? port 0xe0d0 irq 6 264 265# Pseudo devices - the number indicates how many units to allocated. 266pseudo-device loop # Network loopback 267pseudo-device ether # Ethernet support 268pseudo-device sl 1 # Kernel SLIP 269pseudo-device ppp 1 # Kernel PPP 270pseudo-device tun # Packet tunnel. 271pseudo-device pty # Pseudo-ttys (telnet etc) 272pseudo-device md # Memory "disks" 273 274# The `bpf' pseudo-device enables the Berkeley Packet Filter. 275# Be aware of the administrative consequences of enabling this! 276pseudo-device bpf #Berkeley packet filter 277 278#pseudo-device compat_atdisk #IBM-PC HDD support 279