GENERIC revision 54168
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information on this file, please read the handbook section on 5# Kernel Configuration Files: 6# 7# http://www.freebsd.org/handbook/kernelconfig-config.html 8# 9# The handbook is also available locally in /usr/share/doc/handbook 10# if you've installed the doc distribution, otherwise always see the 11# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the 12# latest information. 13# 14# An exhaustive list of options and more detailed explanations of the 15# device lines is also present in the ./LINT configuration file. If you are 16# in doubt as to the purpose or necessity of a line, check first in LINT. 17# 18# $FreeBSD: head/sys/pc98/conf/GENERIC 54168 1999-12-05 21:11:05Z wpaul $ 19 20# GENERIC98 -- Generic PC98 machine with WD/SCSI disks 21 22machine pc98 23cpu I386_CPU 24cpu I486_CPU 25cpu I586_CPU 26cpu I686_CPU 27ident GENERIC98 28maxusers 32 29 30#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 31 32options PC98 #PC98 33options MATH_EMULATE #Support for x87 emulation 34options INET #InterNETworking 35options FFS #Berkeley Fast Filesystem 36options FFS_ROOT #FFS usable as root device [keep this!] 37options MD_ROOT #MD is a potential root device 38options MFS #Memory Filesystem 39options NFS #Network Filesystem 40options NFS_ROOT #NFS usable as root device, "NFS" req'ed 41options MSDOSFS #MSDOS Filesystem 42options CD9660 #ISO 9660 Filesystem 43options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed 44options PROCFS #Process filesystem 45options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 46options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 47options EPSON_BOUNCEDMA #use bounce buufer for 15-16M 48#options EPSON_MEMWIN #EPSON memory window support 49options UCONSOLE #Allow users to grab the console 50#options LINE30 51options USERCONFIG #boot -c editor 52options VISUAL_USERCONFIG #visual boot -c editor 53options KTRACE #ktrace(1) syscall trace support 54options SYSVSHM #SYSV-style shared memory 55options SYSVMSG #SYSV-style message queues 56options SYSVSEM #SYSV-style semaphores 57 58# To make an SMP kernel, the next two are needed 59#options SMP # Symmetric MultiProcessor Kernel 60#options APIC_IO # Symmetric (APIC) I/O 61# Optionally these may need tweaked, (defaults shown): 62#options NCPU=2 # number of CPUs 63#options NBUS=4 # number of busses 64#options NAPIC=1 # number of IO APICs 65#options NINTR=24 # number of INTs 66 67controller isa0 68controller pnp0 # PnP support for ISA 69controller pci0 70 71# Floppy drives 72controller fdc0 at isa? port IO_FD1 irq 11 drq 2 73device fd0 at fdc0 drive 0 74device fd1 at fdc0 drive 1 75device fd2 at fdc0 drive 2 76device fd3 at fdc0 drive 3 77 78# IDE controller and disks 79controller wdc0 at isa? port IO_WD1 irq 9 80device wd0 at wdc0 drive 0 81#device wd1 at wdc0 drive 1 82#device wd2 at wdc0 drive 2 83#device wd3 at wdc0 drive 3 84 85# ATAPI devices on wdc? 86device wcd0 #IDE CD-ROM 87#device wfd0 #IDE Floppy (e.g. LS-120) 88#device wst0 #IDE Tape (e.g. Travan) 89 90# SCSI Controllers 91# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is 92# sufficient for any number of installed devices. 93controller adv0 94controller ahc0 # AHA2940 and onboard AIC7xxx devices 95controller amd0 # AMD 53C974 (Teckram DC-390(T)) 96controller isp0 # Qlogic family 97controller ncr0 # NCR/Symbios Logic 98#controller sym0 # NCR/Symbios Logic (do not mix with ncr, it conflicts) 99 100# 101# WD33C93 SCSI card (55/92 like board) 102# 103 104options BS_TARG_SAFEMODE 105 106# PC-9801-92 107controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0 108# SC-98 109# controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000 110# HA-55BS2 and later 111#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000 112# ELECOM type 113#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000 114# SMIT 115#controller bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 116# Logitec LHA-20x 117#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000 118 119# SCSI peripherals 120# Only one of each of these is needed, they are dynamically allocated. 121controller scbus0 # SCSI bus (required) 122device da0 # Direct Access (disks) 123device sa0 # Sequential Access (tape etc) 124device cd0 # CD 125device pass0 # Passthrough device (direct SCSI access) 126 127# RAID controllers 128device amr0 # AMI MegaRAID 129device mlx0 # Mylex DAC960 family 130 131# Proprietary or custom CD-ROM Interfaces 132device matcd0 at isa? port? 133 134# keyboard driver 135device pckbd0 at isa? port IO_KBD irq 1 136#options KBD_INSTALL_CDEV 137 138device gdc0 at isa? 139 140# splash screen/screen saver 141pseudo-device splash 142 143# syscons is the default console driver, resembling an SCO console 144device sc0 at isa? 145 146# Floating point support - do not disable. 147device npx0 at nexus? port IO_NPX irq 8 148 149# Power management support (see LINT for more options) 150device apm0 at nexus? disable flags 0x20 # Advanced Power Management 151 152# PCCARD (PCMCIA) support 153#controller card0 154#device pcic0 at isa? 155#device pcic1 at isa? 156 157# Serial (COM) ports 158# 159options COM_MULTIPORT 160# 161# COM1 162device sio0 at isa? port IO_COM1 irq 4 163# COM2 (2nd CCU) 164device sio1 at isa? port 0x238 irq 5 flags 0x12000000 165# PC-9861K, PC-9801-101, MDC-926Rs 166#device sio1 at isa? port IO_COM2 irq 5 flags 0x01000000 167#device sio2 at isa? port IO_COM3 irq 6 flags 0x02000000 168# PC-9801-120 (PnP off) 169#device sio1 at isa? port 0x8b0 irq 5 flags 0x11000000 170# MC-16550II, MC-RS98 171#device sio1 at isa? port 0xd2 irq 5 flags 0x14000101 172#device sio2 at isa? port 0x8d2 flags 0x14000101 173# RSB-2000, RSB-3000, B98-02 174#device sio1 at isa? port 0xb0 flags 0x15000101 175#device sio2 at isa? port 0xb1 flags 0x15000101 176# RSB-384 177#device sio1 at isa? port 0xb0 flags 0x16000000 178#device sio2 at isa? port 0xb1 flags 0x16000000 179# RSA-98III 180#device sio1 at isa? port 0x50e0 irq 5 flags 0x18000101 181#device sio2 at isa? port 0x51e0 flags 0x18000101 182# ESP98 183#options COM_ESP 184#device sio1 at isa? port 0x18b0 irq 5 flags 0x19000000 185 186device mse0 at isa? port IO_MSE irq 13 187 188# NEW Parallel port 189device ppc0 at isa? port? irq 14 190controller ppbus0 # Parallel port bus (required) 191device lpt0 # Printer 192device plip0 # TCP/IP over parallel 193device ppi0 # Parallel port interface device 194#controller vpo0 # Requires scbus and da0 195# OLD Parallel port 196# Please stay olpt driver after ppc driver 197device olpt0 at isa? port IO_LPT 198 199 200# PCI Ethernet NICs. 201device de0 # DEC/Intel DC21x4x (``Tulip'') 202device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) 203device tx0 # SMC 9432TX (83c170 ``EPIC'') 204device vx0 # 3Com 3c590, 3c595 (``Vortex'') 205 206# PCI Ethernet NICs that use the common MII bus controller code. 207controller miibus0 # MII bus support 208device dc0 # DEC/Intel 21143 and workalikes 209device rl0 # RealTek 8129/8139 210device sf0 # Adaptec AIC-6915 (``Starfire'') 211device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 212device ste0 # Sundance ST201 (D-Link DFE-550TX) 213device tl0 # Texas Instruments ThunderLAN 214device vr0 # VIA Rhine, Rhine II 215device wb0 # Winbond W89C840F 216device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') 217 218# ISA Ethernet NICs. 219# 220# DP8390 NIC 221# 222# ed0: generic driver 223# ed1: LANEED LD-BDN 224# ed2: EGY-98 225# ed3: LGY-98 226# ed4: ICM-IF-2766/EN-2298-T 227# ed5: SIC-98 228# ed6: PC-9801-108 229# ed7: LA-98 230# ed8: C-NET(98) 231# ed9: C-NET(98)E/L 232# 233# MB86960A NIC 234# 235# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98 236# fe1: C-NET(98)P2/C-NET(9N)E 237# 238# FE_8BIT_SUPPORT is needed to support LAC-98 239# 240#device ed0 at isa? port 0x00d0 irq 6 241#device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 242#device ed1 at isa? port 0x00d8 irq 6 flags 0x200000 243#device ed3 at isa? port 0x00d0 irq 6 flags 0x400000 244#device ed4 at isa? port 0x56d0 irq 5 flags 0x500000 245#device ed2 at isa? port 0x00d8 irq 6 flags 0x300000 246#device ed7 at isa? port 0x00d0 irq 6 flags 0x900000 247#device ed6 at isa? port 0x0770 irq 6 flags 0x800000 248#device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000 249#device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 250device ep0 at isa? port 0x40d0 irq 3 251device fe0 at isa? port 0x00d0 irq 3 252device fe1 at isa? port 0x73d0 irq 5 253device lnc0 at isa? port 0x03d0 irq 6 254 255options FE_8BIT_SUPPORT # LAC-98 support 256 257# PCCARD NIC drivers. 258# ze and zp take over the pcic and cannot coexist with generic pccard 259# support, nor the ed and ep drivers they replace. 260#device zp0 at isa? port 0x00d0 irq 10 iomem 0xe0000 261 262#controller snd0 263#device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3 264#device sbxvi0 at isa? drq 3 265#device sbmidi0 at isa? port 0x80d2 266#device opl0 at isa? port 0x28d2 267#device nss0 at isa? port 0xa460 irq 12 268#device mss0 at isa? port 0xf40 irq 12 drq 1 269#device mpu0 at isa? port 0xe0d0 irq 6 270 271# Pseudo devices - the number indicates how many units to allocated. 272pseudo-device loop # Network loopback 273pseudo-device ether # Ethernet support 274pseudo-device sl 1 # Kernel SLIP 275pseudo-device ppp 1 # Kernel PPP 276pseudo-device tun # Packet tunnel. 277pseudo-device pty # Pseudo-ttys (telnet etc) 278pseudo-device md # Memory "disks" 279 280# The `bpf' pseudo-device enables the Berkeley Packet Filter. 281# Be aware of the administrative consequences of enabling this! 282pseudo-device bpf #Berkeley packet filter 283 284#pseudo-device compat_atdisk #IBM-PC HDD support 285