GENERIC revision 53817
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information on this file, please read the handbook section on 5# Kernel Configuration Files: 6# 7# http://www.freebsd.org/handbook/kernelconfig-config.html 8# 9# The handbook is also available locally in /usr/share/doc/handbook 10# if you've installed the doc distribution, otherwise always see the 11# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the 12# latest information. 13# 14# An exhaustive list of options and more detailed explanations of the 15# device lines is also present in the ./LINT configuration file. If you are 16# in doubt as to the purpose or necessity of a line, check first in LINT. 17# 18# $FreeBSD: head/sys/pc98/conf/GENERIC 53817 1999-11-28 08:55:01Z nyan $ 19 20# GENERIC98 -- Generic PC98 machine with WD/SCSI disks 21 22machine pc98 23cpu I386_CPU 24cpu I486_CPU 25cpu I586_CPU 26cpu I686_CPU 27ident GENERIC98 28maxusers 32 29 30#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 31 32options PC98 #PC98 33options MATH_EMULATE #Support for x87 emulation 34options INET #InterNETworking 35options FFS #Berkeley Fast Filesystem 36options FFS_ROOT #FFS usable as root device [keep this!] 37options MD_ROOT #MD is a potential root device 38options MFS #Memory Filesystem 39options NFS #Network Filesystem 40options NFS_ROOT #NFS usable as root device, "NFS" req'ed 41options MSDOSFS #MSDOS Filesystem 42options CD9660 #ISO 9660 Filesystem 43options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed 44options PROCFS #Process filesystem 45options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 46options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 47options EPSON_BOUNCEDMA #use bounce buufer for 15-16M 48#options EPSON_MEMWIN #EPSON memory window support 49options UCONSOLE #Allow users to grab the console 50#options LINE30 51options USERCONFIG #boot -c editor 52options VISUAL_USERCONFIG #visual boot -c editor 53options KTRACE #ktrace(1) syscall trace support 54options SYSVSHM #SYSV-style shared memory 55options SYSVMSG #SYSV-style message queues 56options SYSVSEM #SYSV-style semaphores 57 58# To make an SMP kernel, the next two are needed 59#options SMP # Symmetric MultiProcessor Kernel 60#options APIC_IO # Symmetric (APIC) I/O 61# Optionally these may need tweaked, (defaults shown): 62#options NCPU=2 # number of CPUs 63#options NBUS=4 # number of busses 64#options NAPIC=1 # number of IO APICs 65#options NINTR=24 # number of INTs 66 67controller isa0 68controller pnp0 # PnP support for ISA 69controller pci0 70 71# Floppy drives 72controller fdc0 at isa? port IO_FD1 irq 11 drq 2 73device fd0 at fdc0 drive 0 74device fd1 at fdc0 drive 1 75device fd2 at fdc0 drive 2 76device fd3 at fdc0 drive 3 77 78# IDE controller and disks 79controller wdc0 at isa? port IO_WD1 irq 9 80device wd0 at wdc0 drive 0 81#device wd1 at wdc0 drive 1 82#device wd2 at wdc0 drive 2 83#device wd3 at wdc0 drive 3 84 85# ATAPI devices on wdc? 86device wcd0 #IDE CD-ROM 87#device wfd0 #IDE Floppy (e.g. LS-120) 88#device wst0 #IDE Tape (e.g. Travan) 89 90# SCSI Controllers 91# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is 92# sufficient for any number of installed devices. 93controller adv0 94controller ahc0 # AHA2940 and onboard AIC7xxx devices 95controller amd0 # AMD 53C974 (Teckram DC-390(T)) 96controller isp0 # Qlogic family 97controller ncr0 # NCR/Symbios Logic 98#controller sym0 # NCR/Symbios Logic (do not mix with ncr, it conflicts) 99 100# 101# WD33C93 SCSI card (55/92 like board) 102# 103 104options BS_TARG_SAFEMODE 105 106# PC-9801-92 107controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0 108# SC-98 109# controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000 110# HA-55BS2 and later 111#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000 112# ELECOM type 113#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000 114# SMIT 115#controller bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 116# Logitec LHA-20x 117#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000 118 119# SCSI peripherals 120# Only one of each of these is needed, they are dynamically allocated. 121controller scbus0 # SCSI bus (required) 122device da0 # Direct Access (disks) 123device sa0 # Sequential Access (tape etc) 124device cd0 # CD 125device pass0 # Passthrough device (direct SCSI access) 126 127# Proprietary or custom CD-ROM Interfaces 128device matcd0 at isa? port? 129 130# keyboard driver 131device pckbd0 at isa? port IO_KBD irq 1 132#options KBD_INSTALL_CDEV 133 134device gdc0 at isa? 135 136# splash screen/screen saver 137pseudo-device splash 138 139# syscons is the default console driver, resembling an SCO console 140device sc0 at isa? 141 142# Floating point support - do not disable. 143device npx0 at nexus? port IO_NPX irq 8 144 145# Power management support (see LINT for more options) 146device apm0 at nexus? disable flags 0x31 # Advanced Power Management 147 148# PCCARD (PCMCIA) support 149#controller card0 150#device pcic0 at isa? 151#device pcic1 at isa? 152 153# Serial (COM) ports 154# 155options COM_MULTIPORT 156# 157# COM1 158device sio0 at isa? port IO_COM1 irq 4 159# COM2 (2nd CCU) 160device sio1 at isa? port 0x238 irq 5 flags 0x12000000 161# PC-9861K, PC-9801-101, MDC-926Rs 162#device sio1 at isa? port IO_COM2 irq 5 flags 0x01000000 163#device sio2 at isa? port IO_COM3 irq 6 flags 0x02000000 164# PC-9801-120 (PnP off) 165#device sio1 at isa? port 0x8b0 irq 5 flags 0x11000000 166# MC-16550II, MC-RS98 167#device sio1 at isa? port 0xd2 irq 5 flags 0x14000101 168#device sio2 at isa? port 0x8d2 flags 0x14000101 169# RSB-2000, RSB-3000, B98-02 170#device sio1 at isa? port 0xb0 flags 0x15000101 171#device sio2 at isa? port 0xb1 flags 0x15000101 172# RSB-384 173#device sio1 at isa? port 0xb0 flags 0x16000000 174#device sio2 at isa? port 0xb1 flags 0x16000000 175# RSA-98III 176#device sio1 at isa? port 0x50e0 irq 5 flags 0x18000101 177#device sio2 at isa? port 0x51e0 flags 0x18000101 178# ESP98 179#options COM_ESP 180#device sio1 at isa? port 0x18b0 irq 5 flags 0x19000000 181 182device mse0 at isa? port IO_MSE irq 13 183 184# NEW Parallel port 185device ppc0 at isa? port? irq 14 186controller ppbus0 # Parallel port bus (required) 187device lpt0 # Printer 188device plip0 # TCP/IP over parallel 189device ppi0 # Parallel port interface device 190#controller vpo0 # Requires scbus and da0 191# OLD Parallel port 192# Please stay olpt driver after ppc driver 193device olpt0 at isa? port IO_LPT 194 195 196# PCI Ethernet NICs. 197device ax0 # ASIX AX88140A 198device de0 # DEC/Intel DC21x4x (``Tulip'') 199device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) 200device pn0 # Lite-On 82c168/82c169 (``PNIC'') 201device tx0 # SMC 9432TX (83c170 ``EPIC'') 202device vx0 # 3Com 3c590, 3c595 (``Vortex'') 203 204# PCI Ethernet NICs that use the common MII bus controller code. 205controller miibus0 # MII bus support 206device al0 # ADMtek AL981/AN985 (``Comet''/``Centaur'') 207device dm0 # Davicom DM9100/DM9102 208device mx0 # Macronix 98713/98715/98725 (``PMAC'') 209device rl0 # RealTek 8129/8139 210device sf0 # Adaptec AIC-6915 (``Starfire'') 211device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 212device ste0 # Sundance ST201 (D-Link DFE-550TX) 213device tl0 # Texas Instruments ThunderLAN 214device vr0 # VIA Rhine, Rhine II 215device wb0 # Winbond W89C840F 216device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') 217 218# ISA Ethernet NICs. 219# 220# DP8390 NIC 221# 222# ed0: generic driver 223# ed1: LANEED LD-BDN 224# ed2: EGY-98 225# ed3: LGY-98 226# ed4: ICM-IF-2766/EN-2298-T 227# ed5: SIC-98 228# ed6: PC-9801-108 229# ed7: LA-98 230# ed8: C-NET(98) 231# ed9: C-NET(98)E/L 232# 233# MB86960A NIC 234# 235# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98 236# fe1: C-NET(98)P2/C-NET(9N)E 237# 238# FE_8BIT_SUPPORT is needed to support LAC-98 239# 240#device ed0 at isa? port 0x00d0 irq 6 241#device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 242#device ed1 at isa? port 0x00d8 irq 6 flags 0x200000 243#device ed3 at isa? port 0x00d0 irq 6 flags 0x400000 244#device ed4 at isa? port 0x56d0 irq 5 flags 0x500000 245#device ed2 at isa? port 0x00d8 irq 6 flags 0x300000 246#device ed7 at isa? port 0x00d0 irq 6 flags 0x900000 247#device ed6 at isa? port 0x0770 irq 6 flags 0x800000 248#device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000 249#device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 250device ep0 at isa? port 0x40d0 irq 3 251device fe0 at isa? port 0x00d0 irq 3 252device fe1 at isa? port 0x73d0 irq 5 253device lnc0 at isa? port 0x03d0 irq 6 254 255options FE_8BIT_SUPPORT # LAC-98 support 256 257# PCCARD NIC drivers. 258# ze and zp take over the pcic and cannot coexist with generic pccard 259# support, nor the ed and ep drivers they replace. 260#device zp0 at isa? port 0x00d0 irq 10 iomem 0xe0000 261 262#controller snd0 263#device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3 264#device sbxvi0 at isa? drq 3 265#device sbmidi0 at isa? port 0x80d2 266#device opl0 at isa? port 0x28d2 267#device nss0 at isa? port 0xa460 irq 12 268#device mss0 at isa? port 0xf40 irq 12 drq 1 269#device mpu0 at isa? port 0xe0d0 irq 6 270 271# Pseudo devices - the number indicates how many units to allocated. 272pseudo-device loop # Network loopback 273pseudo-device ether # Ethernet support 274pseudo-device sl 1 # Kernel SLIP 275pseudo-device ppp 1 # Kernel PPP 276pseudo-device tun # Packet tunnel. 277pseudo-device pty # Pseudo-ttys (telnet etc) 278pseudo-device gzip # Exec gzipped a.out's 279pseudo-device md # Memory "disks" 280 281# The `bpf' pseudo-device enables the Berkeley Packet Filter. 282# Be aware of the administrative consequences of enabling this! 283pseudo-device bpf #Berkeley packet filter 284 285#pseudo-device compat_atdisk #IBM-PC HDD support 286