GENERIC revision 50518
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information on this file, please read the handbook section on 5# Kernel Configuration Files: 6# 7# http://www.freebsd.org/handbook/kernelconfig-config.html 8# 9# The handbook is also available locally in /usr/share/doc/handbook 10# if you've installed the doc distribution, otherwise always see the 11# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the 12# latest information. 13# 14# An exhaustive list of options and more detailed explanations of the 15# device lines is also present in the ./LINT configuration file. If you are 16# in doubt as to the purpose or necessity of a line, check first in LINT. 17# 18# $FreeBSD: head/sys/pc98/conf/GENERIC 50518 1999-08-28 16:49:58Z nyan $ 19 20# GENERIC98 -- Generic PC98 machine with WD/SCSI disks 21 22machine pc98 23cpu I386_CPU 24cpu I486_CPU 25cpu I586_CPU 26cpu I686_CPU 27ident GENERIC98 28maxusers 32 29 30#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 31 32options PC98 #PC98 33options MATH_EMULATE #Support for x87 emulation 34options INET #InterNETworking 35options FFS #Berkeley Fast Filesystem 36options FFS_ROOT #FFS usable as root device [keep this!] 37options MFS #Memory Filesystem 38options MFS_ROOT #MFS usable as root device, "MFS" req'ed 39options NFS #Network Filesystem 40options NFS_ROOT #NFS usable as root device, "NFS" req'ed 41options MSDOSFS #MSDOS Filesystem 42options CD9660 #ISO 9660 Filesystem 43options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed 44options PROCFS #Process filesystem 45options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 46options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 47options EPSON_BOUNCEDMA #use bounce buufer for 15-16M 48#options EPSON_MEMWIN #EPSON memory window support 49options UCONSOLE #Allow users to grab the console 50#options LINE30 51options USERCONFIG #boot -c editor 52options VISUAL_USERCONFIG #visual boot -c editor 53options KTRACE #ktrace(1) syscall trace support 54options SYSVSHM #SYSV-style shared memory 55options SYSVMSG #SYSV-style message queues 56options SYSVSEM #SYSV-style semaphores 57 58options COM_MULTIPORT 59 60# 61# IBM-PC HDD support 62#options COMPAT_ATDISK 63 64# To make an SMP kernel, the next two are needed 65#options SMP # Symmetric MultiProcessor Kernel 66#options APIC_IO # Symmetric (APIC) I/O 67# Optionally these may need tweaked, (defaults shown): 68#options NCPU=2 # number of CPUs 69#options NBUS=4 # number of busses 70#options NAPIC=1 # number of IO APICs 71#options NINTR=24 # number of INTs 72 73controller isa0 74controller pnp0 # PnP support for ISA 75controller pci0 76 77# Floppy drives 78controller fdc0 at isa? port IO_FD1 irq 11 drq 2 79disk fd0 at fdc0 drive 0 80disk fd1 at fdc0 drive 1 81disk fd2 at fdc0 drive 2 82disk fd3 at fdc0 drive 3 83 84# IDE controller and disks 85controller wdc0 at isa? port IO_WD1 irq 9 86disk wd0 at wdc0 drive 0 87#disk wd1 at wdc0 drive 1 88#disk wd2 at wdc0 drive 2 89#disk wd3 at wdc0 drive 3 90 91# ATAPI devices on wdc? 92device wcd0 #IDE CD-ROM 93#device wfd0 #IDE Floppy (e.g. LS-120) 94#device wst0 #IDE Tape (e.g. Travan) 95 96# SCSI Controllers 97# A single entry for any of these controllers (ncr, ahb, ahc) is 98# sufficient for any number of installed devices. 99controller ncr0 # NCR/Symbios Logic 100controller ahc0 # AHA2940 and onboard AIC7xxx devices 101controller isp0 # Qlogic family 102controller adv0 103 104# 105# WD33C93 SCSI card (55/92 like board) 106# 107 108options BS_TARG_SAFEMODE 109 110# PC-9801-92 111controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0 112# SC-98 113# controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000 114# HA-55BS2 and later 115#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000 116# ELECOM type 117#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000 118# SMIT 119#controller bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 120# Logitec LHA-20x 121#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000 122 123# SCSI peripherals 124# Only one of each of these is needed, they are dynamically allocated. 125controller scbus0 # SCSI bus (required) 126device da0 # Direct Access (disks) 127device sa0 # Sequential Access (tape etc) 128device cd0 # CD 129device pass0 # Passthrough device (direct SCSI access) 130 131# Proprietary or custom CD-ROM Interfaces 132controller matcd0 at isa? port? 133 134# keyboard driver 135device pckbd0 at isa? port IO_KBD irq 1 136#options KBD_INSTALL_CDEV 137 138device gdc0 at isa? 139 140# splash screen/screen saver 141pseudo-device splash 142 143device sc0 at isa? 144 145# Floating point support - do not disable. 146device npx0 at nexus? port IO_NPX irq 8 147 148# Power management support (see LINT for more options) 149device apm0 at nexus? disable flags 0x31 # Advanced Power Management 150 151# PCCARD (PCMCIA) support 152#controller card0 153#device pcic0 at card? 154#device pcic1 at card? 155 156# Serial (COM) ports 157# 158# COM1 159device sio0 at isa? port IO_COM1 irq 4 160# COM2 (2nd CCU) 161device sio1 at isa? port 0x238 irq 5 flags 0x12000000 162# PC-9861K, PC-9801-101, MDC-926Rs 163#device sio1 at isa? port IO_COM2 irq 5 flags 0x01000000 164#device sio2 at isa? port IO_COM3 irq 6 flags 0x02000000 165# PC-9801-120 (PnP off) 166#device sio1 at isa? port 0x8b0 irq 5 flags 0x11000000 167# MC-16550II, MC-RS98 168#device sio1 at isa? port 0xd2 irq 5 flags 0x14000101 169#device sio2 at isa? port 0x8d2 flags 0x14000101 170# RSB-2000, RSB-3000, B98-02 171#device sio1 at isa? port 0xb0 flags 0x15000101 172#device sio2 at isa? port 0xb1 flags 0x15000101 173# RSB-384 174#device sio1 at isa? port 0xb0 flags 0x16000000 175#device sio2 at isa? port 0xb1 flags 0x16000000 176# RSA-98III 177#device sio1 at isa? port 0x50e0 irq 5 flags 0x18000101 178#device sio2 at isa? port 0x51e0 flags 0x18000101 179# ESP98 180#options COM_ESP 181#device sio1 at isa? port 0x18b0 irq 5 flags 0x19000000 182 183device mse0 at isa? port IO_MSE irq 13 184 185# NEW Parallel port 186device ppc0 at isa? port? irq 14 187controller ppbus0 188device lpt0 at ppbus? 189device plip0 at ppbus? 190device ppi0 at ppbus? 191#controller vpo0 at ppbus? 192# OLD Parallel port 193# Please stay olpt driver after ppc driver 194device olpt0 at isa? port IO_LPT 195 196# MII bus support, required for some 10/100 NICs 197controller miibus0 198 199# PCI Ethernet NICs. 200device al0 # ADMtek AL981 (``Comet'') 201device ax0 # ASIX AX88140A 202device de0 # DEC/Intel DC21x4x (``Tulip'') 203device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) 204device mx0 # Macronix 98713/98715/98725 (``PMAC'') 205device pn0 # Lite-On 82c168/82c169 (``PNIC'') 206device rl0 # RealTek 8129/8139 207device sf0 # Adaptec AIC-6915 (``Starfire'') 208device ste0 # Sundance ST201 (D-Link DFE-550TX) 209device tl0 # Texas Instruments ThunderLAN 210device tx0 # SMC 9432TX (83c170 ``EPIC'') 211device vr0 # VIA Rhine, Rhine II 212device vx0 # 3Com 3c590, 3c595 (``Vortex'') 213device wb0 # Winbond W89C840F 214device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') 215 216# 217# DP8390 NIC 218# 219# ed0: generic driver 220# ed1: LANEED LD-BDN 221# ed2: EGY-98 222# ed3: LGY-98 223# ed4: ICM-IF-2766/EN-2298-T 224# ed5: SIC-98 225# ed6: PC-9801-108 226# ed7: LA-98 227# ed8: C-NET(98) 228# ed9: C-NET(98)E/L 229# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98 230# fe1: C-NET(98)P2/C-NET(9N)E 231# 232# FE_8BIT_SUPPORT is needed to support LAC-98 233# 234device ed0 at isa? port 0x00d0 irq 6 235device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 236device ed1 at isa? port 0x00d8 irq 6 flags 0x200000 237device ed3 at isa? port 0x00d0 irq 6 flags 0x400000 238device ed4 at isa? port 0x56d0 irq 5 flags 0x500000 239device ed2 at isa? port 0x00d8 irq 6 flags 0x300000 240device ed7 at isa? port 0x00d0 irq 6 flags 0x900000 241device ed6 at isa? port 0x0770 irq 6 flags 0x800000 242device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000 243device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 244device ep0 at isa? port 0x40d0 irq 3 245device fe0 at isa? port 0x00d0 irq 3 246device fe1 at isa? port 0x73d0 irq 5 247device lnc0 at isa? port 0x03d0 irq 6 248#device zp0 at isa? port 0x00d0 irq 10 iomem 0xe0000 249 250options FE_8BIT_SUPPORT # LAC-98 support 251 252#controller snd0 253#device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3 254#device sbxvi0 at isa? drq 3 255#device sbmidi0 at isa? port 0x80d2 256#device opl0 at isa? port 0x28d2 257#device pcm0 at isa? port 0xa460 irq 12 258#device mss0 at isa? port 0xf40 irq 12 drq 1 259 260# Pseudo devices - the number indicates how many units to allocated. 261pseudo-device loop # Network loopback 262pseudo-device ether # Ethernet support 263pseudo-device sl 1 # Kernel SLIP 264pseudo-device ppp 1 # Kernel PPP 265pseudo-device tun # Packet tunnel, for ppp(1) 266pseudo-device pty # Pseudo-ttys (telnet etc) 267pseudo-device gzip # Exec gzipped a.out's 268 269# The `bpf' pseudo-device enables the Berkeley Packet Filter. 270# Be aware of the administrative consequences of enabling this! 271pseudo-device bpf #Berkeley packet filter 272