ieee80211_ioctl.h revision 172062
1/*- 2 * Copyright (c) 2001 Atsushi Onoe 3 * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $FreeBSD: head/sys/net80211/ieee80211_ioctl.h 172062 2007-09-06 00:04:36Z sam $ 27 */ 28#ifndef _NET80211_IEEE80211_IOCTL_H_ 29#define _NET80211_IEEE80211_IOCTL_H_ 30 31/* 32 * IEEE 802.11 ioctls. 33 */ 34#include <net80211/_ieee80211.h> 35#include <net80211/ieee80211.h> 36#include <net80211/ieee80211_crypto.h> 37 38/* 39 * Per/node (station) statistics. 40 */ 41struct ieee80211_nodestats { 42 uint32_t ns_rx_data; /* rx data frames */ 43 uint32_t ns_rx_mgmt; /* rx management frames */ 44 uint32_t ns_rx_ctrl; /* rx control frames */ 45 uint32_t ns_rx_ucast; /* rx unicast frames */ 46 uint32_t ns_rx_mcast; /* rx multi/broadcast frames */ 47 uint64_t ns_rx_bytes; /* rx data count (bytes) */ 48 uint64_t ns_rx_beacons; /* rx beacon frames */ 49 uint32_t ns_rx_proberesp; /* rx probe response frames */ 50 51 uint32_t ns_rx_dup; /* rx discard 'cuz dup */ 52 uint32_t ns_rx_noprivacy; /* rx w/ wep but privacy off */ 53 uint32_t ns_rx_wepfail; /* rx wep processing failed */ 54 uint32_t ns_rx_demicfail; /* rx demic failed */ 55 uint32_t ns_rx_decap; /* rx decapsulation failed */ 56 uint32_t ns_rx_defrag; /* rx defragmentation failed */ 57 uint32_t ns_rx_disassoc; /* rx disassociation */ 58 uint32_t ns_rx_deauth; /* rx deauthentication */ 59 uint32_t ns_rx_action; /* rx action */ 60 uint32_t ns_rx_decryptcrc; /* rx decrypt failed on crc */ 61 uint32_t ns_rx_unauth; /* rx on unauthorized port */ 62 uint32_t ns_rx_unencrypted; /* rx unecrypted w/ privacy */ 63 64 uint32_t ns_tx_data; /* tx data frames */ 65 uint32_t ns_tx_mgmt; /* tx management frames */ 66 uint32_t ns_tx_ucast; /* tx unicast frames */ 67 uint32_t ns_tx_mcast; /* tx multi/broadcast frames */ 68 uint64_t ns_tx_bytes; /* tx data count (bytes) */ 69 uint32_t ns_tx_probereq; /* tx probe request frames */ 70 71 uint32_t ns_tx_novlantag; /* tx discard 'cuz no tag */ 72 uint32_t ns_tx_vlanmismatch; /* tx discard 'cuz bad tag */ 73 74 uint32_t ns_ps_discard; /* ps discard 'cuz of age */ 75 76 /* MIB-related state */ 77 uint32_t ns_tx_assoc; /* [re]associations */ 78 uint32_t ns_tx_assoc_fail; /* [re]association failures */ 79 uint32_t ns_tx_auth; /* [re]authentications */ 80 uint32_t ns_tx_auth_fail; /* [re]authentication failures*/ 81 uint32_t ns_tx_deauth; /* deauthentications */ 82 uint32_t ns_tx_deauth_code; /* last deauth reason */ 83 uint32_t ns_tx_disassoc; /* disassociations */ 84 uint32_t ns_tx_disassoc_code; /* last disassociation reason */ 85}; 86 87/* 88 * Summary statistics. 89 */ 90struct ieee80211_stats { 91 uint32_t is_rx_badversion; /* rx frame with bad version */ 92 uint32_t is_rx_tooshort; /* rx frame too short */ 93 uint32_t is_rx_wrongbss; /* rx from wrong bssid */ 94 uint32_t is_rx_dup; /* rx discard 'cuz dup */ 95 uint32_t is_rx_wrongdir; /* rx w/ wrong direction */ 96 uint32_t is_rx_mcastecho; /* rx discard 'cuz mcast echo */ 97 uint32_t is_rx_notassoc; /* rx discard 'cuz sta !assoc */ 98 uint32_t is_rx_noprivacy; /* rx w/ wep but privacy off */ 99 uint32_t is_rx_unencrypted; /* rx w/o wep and privacy on */ 100 uint32_t is_rx_wepfail; /* rx wep processing failed */ 101 uint32_t is_rx_decap; /* rx decapsulation failed */ 102 uint32_t is_rx_mgtdiscard; /* rx discard mgt frames */ 103 uint32_t is_rx_ctl; /* rx discard ctrl frames */ 104 uint32_t is_rx_beacon; /* rx beacon frames */ 105 uint32_t is_rx_rstoobig; /* rx rate set truncated */ 106 uint32_t is_rx_elem_missing; /* rx required element missing*/ 107 uint32_t is_rx_elem_toobig; /* rx element too big */ 108 uint32_t is_rx_elem_toosmall; /* rx element too small */ 109 uint32_t is_rx_elem_unknown; /* rx element unknown */ 110 uint32_t is_rx_badchan; /* rx frame w/ invalid chan */ 111 uint32_t is_rx_chanmismatch; /* rx frame chan mismatch */ 112 uint32_t is_rx_nodealloc; /* rx frame dropped */ 113 uint32_t is_rx_ssidmismatch; /* rx frame ssid mismatch */ 114 uint32_t is_rx_auth_unsupported; /* rx w/ unsupported auth alg */ 115 uint32_t is_rx_auth_fail; /* rx sta auth failure */ 116 uint32_t is_rx_auth_countermeasures;/* rx auth discard 'cuz CM */ 117 uint32_t is_rx_assoc_bss; /* rx assoc from wrong bssid */ 118 uint32_t is_rx_assoc_notauth; /* rx assoc w/o auth */ 119 uint32_t is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */ 120 uint32_t is_rx_assoc_norate; /* rx assoc w/ no rate match */ 121 uint32_t is_rx_assoc_badwpaie; /* rx assoc w/ bad WPA IE */ 122 uint32_t is_rx_deauth; /* rx deauthentication */ 123 uint32_t is_rx_disassoc; /* rx disassociation */ 124 uint32_t is_rx_badsubtype; /* rx frame w/ unknown subtype*/ 125 uint32_t is_rx_nobuf; /* rx failed for lack of buf */ 126 uint32_t is_rx_decryptcrc; /* rx decrypt failed on crc */ 127 uint32_t is_rx_ahdemo_mgt; /* rx discard ahdemo mgt frame*/ 128 uint32_t is_rx_bad_auth; /* rx bad auth request */ 129 uint32_t is_rx_unauth; /* rx on unauthorized port */ 130 uint32_t is_rx_badkeyid; /* rx w/ incorrect keyid */ 131 uint32_t is_rx_ccmpreplay; /* rx seq# violation (CCMP) */ 132 uint32_t is_rx_ccmpformat; /* rx format bad (CCMP) */ 133 uint32_t is_rx_ccmpmic; /* rx MIC check failed (CCMP) */ 134 uint32_t is_rx_tkipreplay; /* rx seq# violation (TKIP) */ 135 uint32_t is_rx_tkipformat; /* rx format bad (TKIP) */ 136 uint32_t is_rx_tkipmic; /* rx MIC check failed (TKIP) */ 137 uint32_t is_rx_tkipicv; /* rx ICV check failed (TKIP) */ 138 uint32_t is_rx_badcipher; /* rx failed 'cuz key type */ 139 uint32_t is_rx_nocipherctx; /* rx failed 'cuz key !setup */ 140 uint32_t is_rx_acl; /* rx discard 'cuz acl policy */ 141 uint32_t is_tx_nobuf; /* tx failed for lack of buf */ 142 uint32_t is_tx_nonode; /* tx failed for no node */ 143 uint32_t is_tx_unknownmgt; /* tx of unknown mgt frame */ 144 uint32_t is_tx_badcipher; /* tx failed 'cuz key type */ 145 uint32_t is_tx_nodefkey; /* tx failed 'cuz no defkey */ 146 uint32_t is_tx_noheadroom; /* tx failed 'cuz no space */ 147 uint32_t is_tx_fragframes; /* tx frames fragmented */ 148 uint32_t is_tx_frags; /* tx fragments created */ 149 uint32_t is_scan_active; /* active scans started */ 150 uint32_t is_scan_passive; /* passive scans started */ 151 uint32_t is_node_timeout; /* nodes timed out inactivity */ 152 uint32_t is_crypto_nomem; /* no memory for crypto ctx */ 153 uint32_t is_crypto_tkip; /* tkip crypto done in s/w */ 154 uint32_t is_crypto_tkipenmic; /* tkip en-MIC done in s/w */ 155 uint32_t is_crypto_tkipdemic; /* tkip de-MIC done in s/w */ 156 uint32_t is_crypto_tkipcm; /* tkip counter measures */ 157 uint32_t is_crypto_ccmp; /* ccmp crypto done in s/w */ 158 uint32_t is_crypto_wep; /* wep crypto done in s/w */ 159 uint32_t is_crypto_setkey_cipher;/* cipher rejected key */ 160 uint32_t is_crypto_setkey_nokey; /* no key index for setkey */ 161 uint32_t is_crypto_delkey; /* driver key delete failed */ 162 uint32_t is_crypto_badcipher; /* unknown cipher */ 163 uint32_t is_crypto_nocipher; /* cipher not available */ 164 uint32_t is_crypto_attachfail; /* cipher attach failed */ 165 uint32_t is_crypto_swfallback; /* cipher fallback to s/w */ 166 uint32_t is_crypto_keyfail; /* driver key alloc failed */ 167 uint32_t is_crypto_enmicfail; /* en-MIC failed */ 168 uint32_t is_ibss_capmismatch; /* merge failed-cap mismatch */ 169 uint32_t is_ibss_norate; /* merge failed-rate mismatch */ 170 uint32_t is_ps_unassoc; /* ps-poll for unassoc. sta */ 171 uint32_t is_ps_badaid; /* ps-poll w/ incorrect aid */ 172 uint32_t is_ps_qempty; /* ps-poll w/ nothing to send */ 173 uint32_t is_ff_badhdr; /* fast frame rx'd w/ bad hdr */ 174 uint32_t is_ff_tooshort; /* fast frame rx decap error */ 175 uint32_t is_ff_split; /* fast frame rx split error */ 176 uint32_t is_ff_decap; /* fast frames decap'd */ 177 uint32_t is_ff_encap; /* fast frames encap'd for tx */ 178 uint32_t is_rx_badbintval; /* rx frame w/ bogus bintval */ 179 uint32_t is_rx_demicfail; /* rx demic failed */ 180 uint32_t is_rx_defrag; /* rx defragmentation failed */ 181 uint32_t is_rx_mgmt; /* rx management frames */ 182 uint32_t is_rx_action; /* rx action mgt frames */ 183 uint32_t is_amsdu_tooshort; /* A-MSDU rx decap error */ 184 uint32_t is_amsdu_split; /* A-MSDU rx split error */ 185 uint32_t is_amsdu_decap; /* A-MSDU decap'd */ 186 uint32_t is_amsdu_encap; /* A-MSDU encap'd for tx */ 187 uint32_t is_ampdu_bar_bad; /* A-MPDU BAR out of window */ 188 uint32_t is_ampdu_bar_oow; /* A-MPDU BAR before ADDBA */ 189 uint32_t is_ampdu_bar_rx; /* A-MPDU BAR frames handled */ 190 uint32_t is_ampdu_rx_flush; /* A-MPDU frames flushed */ 191 uint32_t is_ampdu_rx_oor; /* A-MPDU frames out-of-order */ 192 uint32_t is_ampdu_rx_copy; /* A-MPDU frames copied down */ 193 uint32_t is_spare[32]; 194}; 195 196/* 197 * Max size of optional information elements. We artificially 198 * constrain this; it's limited only by the max frame size (and 199 * the max parameter size of the wireless extensions). 200 */ 201#define IEEE80211_MAX_OPT_IE 256 202 203/* 204 * WPA/RSN get/set key request. Specify the key/cipher 205 * type and whether the key is to be used for sending and/or 206 * receiving. The key index should be set only when working 207 * with global keys (use IEEE80211_KEYIX_NONE for ``no index''). 208 * Otherwise a unicast/pairwise key is specified by the bssid 209 * (on a station) or mac address (on an ap). They key length 210 * must include any MIC key data; otherwise it should be no 211 more than IEEE80211_KEYBUF_SIZE. 212 */ 213struct ieee80211req_key { 214 uint8_t ik_type; /* key/cipher type */ 215 uint8_t ik_pad; 216 uint16_t ik_keyix; /* key index */ 217 uint8_t ik_keylen; /* key length in bytes */ 218 uint8_t ik_flags; 219/* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */ 220#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */ 221 uint8_t ik_macaddr[IEEE80211_ADDR_LEN]; 222 uint64_t ik_keyrsc; /* key receive sequence counter */ 223 uint64_t ik_keytsc; /* key transmit sequence counter */ 224 uint8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; 225}; 226 227/* 228 * Delete a key either by index or address. Set the index 229 * to IEEE80211_KEYIX_NONE when deleting a unicast key. 230 */ 231struct ieee80211req_del_key { 232 uint8_t idk_keyix; /* key index */ 233 uint8_t idk_macaddr[IEEE80211_ADDR_LEN]; 234}; 235 236/* 237 * MLME state manipulation request. IEEE80211_MLME_ASSOC 238 * only makes sense when operating as a station. The other 239 * requests can be used when operating as a station or an 240 * ap (to effect a station). 241 */ 242struct ieee80211req_mlme { 243 uint8_t im_op; /* operation to perform */ 244#define IEEE80211_MLME_ASSOC 1 /* associate station */ 245#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */ 246#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */ 247#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */ 248#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */ 249 uint8_t im_ssid_len; /* length of optional ssid */ 250 uint16_t im_reason; /* 802.11 reason code */ 251 uint8_t im_macaddr[IEEE80211_ADDR_LEN]; 252 uint8_t im_ssid[IEEE80211_NWID_LEN]; 253}; 254 255/* 256 * MAC ACL operations. 257 */ 258enum { 259 IEEE80211_MACCMD_POLICY_OPEN = 0, /* set policy: no ACL's */ 260 IEEE80211_MACCMD_POLICY_ALLOW = 1, /* set policy: allow traffic */ 261 IEEE80211_MACCMD_POLICY_DENY = 2, /* set policy: deny traffic */ 262 IEEE80211_MACCMD_FLUSH = 3, /* flush ACL database */ 263 IEEE80211_MACCMD_DETACH = 4, /* detach ACL policy */ 264 IEEE80211_MACCMD_POLICY = 5, /* get ACL policy */ 265 IEEE80211_MACCMD_LIST = 6, /* get ACL database */ 266}; 267 268struct ieee80211req_maclist { 269 uint8_t ml_macaddr[IEEE80211_ADDR_LEN]; 270}; 271 272/* 273 * Set the active channel list. Note this list is 274 * intersected with the available channel list in 275 * calculating the set of channels actually used in 276 * scanning. 277 */ 278struct ieee80211req_chanlist { 279 uint8_t ic_channels[IEEE80211_CHAN_BYTES]; 280}; 281 282/* 283 * Get the active channel list info. 284 */ 285struct ieee80211req_chaninfo { 286 u_int ic_nchans; 287 struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX]; 288}; 289 290/* 291 * Retrieve the WPA/RSN information element for an associated station. 292 */ 293struct ieee80211req_wpaie { /* old version w/ only one ie */ 294 uint8_t wpa_macaddr[IEEE80211_ADDR_LEN]; 295 uint8_t wpa_ie[IEEE80211_MAX_OPT_IE]; 296}; 297struct ieee80211req_wpaie2 { 298 uint8_t wpa_macaddr[IEEE80211_ADDR_LEN]; 299 uint8_t wpa_ie[IEEE80211_MAX_OPT_IE]; 300 uint8_t rsn_ie[IEEE80211_MAX_OPT_IE]; 301}; 302 303/* 304 * Retrieve per-node statistics. 305 */ 306struct ieee80211req_sta_stats { 307 union { 308 /* NB: explicitly force 64-bit alignment */ 309 uint8_t macaddr[IEEE80211_ADDR_LEN]; 310 uint64_t pad; 311 } is_u; 312 struct ieee80211_nodestats is_stats; 313}; 314 315/* 316 * Station information block; the mac address is used 317 * to retrieve other data like stats, unicast key, etc. 318 */ 319struct ieee80211req_sta_info { 320 uint16_t isi_len; /* length (mult of 4) */ 321 uint16_t isi_ie_off; /* offset to IE data */ 322 uint16_t isi_ie_len; /* IE length */ 323 uint16_t isi_freq; /* MHz */ 324 uint16_t isi_flags; /* channel flags */ 325 uint16_t isi_state; /* state flags */ 326 uint8_t isi_authmode; /* authentication algorithm */ 327 int8_t isi_rssi; /* receive signal strength */ 328 int8_t isi_noise; /* noise floor */ 329 uint8_t isi_capinfo; /* capabilities */ 330 uint8_t isi_erp; /* ERP element */ 331 uint8_t isi_macaddr[IEEE80211_ADDR_LEN]; 332 uint8_t isi_nrates; 333 /* negotiated rates */ 334 uint8_t isi_rates[IEEE80211_RATE_MAXSIZE]; 335 uint8_t isi_txrate; /* index to isi_rates[] */ 336 uint16_t isi_associd; /* assoc response */ 337 uint16_t isi_txpower; /* current tx power */ 338 uint16_t isi_vlan; /* vlan tag */ 339 uint16_t isi_txseqs[17]; /* seq to be transmitted */ 340 uint16_t isi_rxseqs[17]; /* seq previous for qos frames*/ 341 uint16_t isi_inact; /* inactivity timer */ 342 /* XXX frag state? */ 343 /* variable length IE data */ 344}; 345 346/* 347 * Retrieve per-station information; to retrieve all 348 * specify a mac address of ff:ff:ff:ff:ff:ff. 349 */ 350struct ieee80211req_sta_req { 351 union { 352 /* NB: explicitly force 64-bit alignment */ 353 uint8_t macaddr[IEEE80211_ADDR_LEN]; 354 uint64_t pad; 355 } is_u; 356 struct ieee80211req_sta_info info[1]; /* variable length */ 357}; 358 359/* 360 * Get/set per-station tx power cap. 361 */ 362struct ieee80211req_sta_txpow { 363 uint8_t it_macaddr[IEEE80211_ADDR_LEN]; 364 uint8_t it_txpow; 365}; 366 367/* 368 * WME parameters are set and return using i_val and i_len. 369 * i_val holds the value itself. i_len specifies the AC 370 * and, as appropriate, then high bit specifies whether the 371 * operation is to be applied to the BSS or ourself. 372 */ 373#define IEEE80211_WMEPARAM_SELF 0x0000 /* parameter applies to self */ 374#define IEEE80211_WMEPARAM_BSS 0x8000 /* parameter applies to BSS */ 375#define IEEE80211_WMEPARAM_VAL 0x7fff /* parameter value */ 376 377#ifdef __FreeBSD__ 378/* 379 * FreeBSD-style ioctls. 380 */ 381/* the first member must be matched with struct ifreq */ 382struct ieee80211req { 383 char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */ 384 uint16_t i_type; /* req type */ 385 int16_t i_val; /* Index or simple value */ 386 int16_t i_len; /* Index or simple value */ 387 void *i_data; /* Extra data */ 388}; 389#define SIOCS80211 _IOW('i', 234, struct ieee80211req) 390#define SIOCG80211 _IOWR('i', 235, struct ieee80211req) 391#define SIOCG80211STATS _IOWR('i', 236, struct ifreq) 392 393#define IEEE80211_IOC_SSID 1 394#define IEEE80211_IOC_NUMSSIDS 2 395#define IEEE80211_IOC_WEP 3 396#define IEEE80211_WEP_NOSUP -1 397#define IEEE80211_WEP_OFF 0 398#define IEEE80211_WEP_ON 1 399#define IEEE80211_WEP_MIXED 2 400#define IEEE80211_IOC_WEPKEY 4 401#define IEEE80211_IOC_NUMWEPKEYS 5 402#define IEEE80211_IOC_WEPTXKEY 6 403#define IEEE80211_IOC_AUTHMODE 7 404#define IEEE80211_IOC_STATIONNAME 8 405#define IEEE80211_IOC_CHANNEL 9 406#define IEEE80211_IOC_POWERSAVE 10 407#define IEEE80211_POWERSAVE_NOSUP -1 408#define IEEE80211_POWERSAVE_OFF 0 409#define IEEE80211_POWERSAVE_CAM 1 410#define IEEE80211_POWERSAVE_PSP 2 411#define IEEE80211_POWERSAVE_PSP_CAM 3 412#define IEEE80211_POWERSAVE_ON IEEE80211_POWERSAVE_CAM 413#define IEEE80211_IOC_POWERSAVESLEEP 11 414#define IEEE80211_IOC_RTSTHRESHOLD 12 415#define IEEE80211_IOC_PROTMODE 13 416#define IEEE80211_PROTMODE_OFF 0 417#define IEEE80211_PROTMODE_CTS 1 418#define IEEE80211_PROTMODE_RTSCTS 2 419#define IEEE80211_IOC_TXPOWER 14 /* global tx power limit */ 420#define IEEE80211_IOC_BSSID 15 421#define IEEE80211_IOC_ROAMING 16 /* roaming mode */ 422#define IEEE80211_IOC_PRIVACY 17 /* privacy invoked */ 423#define IEEE80211_IOC_DROPUNENCRYPTED 18 /* discard unencrypted frames */ 424#define IEEE80211_IOC_WPAKEY 19 425#define IEEE80211_IOC_DELKEY 20 426#define IEEE80211_IOC_MLME 21 427#define IEEE80211_IOC_OPTIE 22 /* optional info. element */ 428#define IEEE80211_IOC_SCAN_REQ 23 429/* 24 was IEEE80211_IOC_SCAN_RESULTS */ 430#define IEEE80211_IOC_COUNTERMEASURES 25 /* WPA/TKIP countermeasures */ 431#define IEEE80211_IOC_WPA 26 /* WPA mode (0,1,2) */ 432#define IEEE80211_IOC_CHANLIST 27 /* channel list */ 433#define IEEE80211_IOC_WME 28 /* WME mode (on, off) */ 434#define IEEE80211_IOC_HIDESSID 29 /* hide SSID mode (on, off) */ 435#define IEEE80211_IOC_APBRIDGE 30 /* AP inter-sta bridging */ 436#define IEEE80211_IOC_MCASTCIPHER 31 /* multicast/default cipher */ 437#define IEEE80211_IOC_MCASTKEYLEN 32 /* multicast key length */ 438#define IEEE80211_IOC_UCASTCIPHERS 33 /* unicast cipher suites */ 439#define IEEE80211_IOC_UCASTCIPHER 34 /* unicast cipher */ 440#define IEEE80211_IOC_UCASTKEYLEN 35 /* unicast key length */ 441#define IEEE80211_IOC_DRIVER_CAPS 36 /* driver capabilities */ 442#define IEEE80211_IOC_KEYMGTALGS 37 /* key management algorithms */ 443#define IEEE80211_IOC_RSNCAPS 38 /* RSN capabilities */ 444#define IEEE80211_IOC_WPAIE 39 /* WPA information element */ 445#define IEEE80211_IOC_STA_STATS 40 /* per-station statistics */ 446#define IEEE80211_IOC_MACCMD 41 /* MAC ACL operation */ 447#define IEEE80211_IOC_CHANINFO 42 /* channel info list */ 448#define IEEE80211_IOC_TXPOWMAX 43 /* max tx power for channel */ 449#define IEEE80211_IOC_STA_TXPOW 44 /* per-station tx power limit */ 450/* 45 was IEEE80211_IOC_STA_INFO */ 451#define IEEE80211_IOC_WME_CWMIN 46 /* WME: ECWmin */ 452#define IEEE80211_IOC_WME_CWMAX 47 /* WME: ECWmax */ 453#define IEEE80211_IOC_WME_AIFS 48 /* WME: AIFSN */ 454#define IEEE80211_IOC_WME_TXOPLIMIT 49 /* WME: txops limit */ 455#define IEEE80211_IOC_WME_ACM 50 /* WME: ACM (bss only) */ 456#define IEEE80211_IOC_WME_ACKPOLICY 51 /* WME: ACK policy (!bss only)*/ 457#define IEEE80211_IOC_DTIM_PERIOD 52 /* DTIM period (beacons) */ 458#define IEEE80211_IOC_BEACON_INTERVAL 53 /* beacon interval (ms) */ 459#define IEEE80211_IOC_ADDMAC 54 /* add sta to MAC ACL table */ 460#define IEEE80211_IOC_DELMAC 55 /* del sta from MAC ACL table */ 461#define IEEE80211_IOC_PUREG 56 /* pure 11g (no 11b stations) */ 462#define IEEE80211_IOC_FF 57 /* ATH fast frames (on, off) */ 463#define IEEE80211_IOC_TURBOP 58 /* ATH turbo' (on, off) */ 464#define IEEE80211_IOC_BGSCAN 59 /* bg scanning (on, off) */ 465#define IEEE80211_IOC_BGSCAN_IDLE 60 /* bg scan idle threshold */ 466#define IEEE80211_IOC_BGSCAN_INTERVAL 61 /* bg scan interval */ 467#define IEEE80211_IOC_SCANVALID 65 /* scan cache valid threshold */ 468#define IEEE80211_IOC_ROAM_RSSI_11A 66 /* rssi threshold in 11a */ 469#define IEEE80211_IOC_ROAM_RSSI_11B 67 /* rssi threshold in 11b */ 470#define IEEE80211_IOC_ROAM_RSSI_11G 68 /* rssi threshold in 11g */ 471#define IEEE80211_IOC_ROAM_RATE_11A 69 /* tx rate threshold in 11a */ 472#define IEEE80211_IOC_ROAM_RATE_11B 70 /* tx rate threshold in 11b */ 473#define IEEE80211_IOC_ROAM_RATE_11G 71 /* tx rate threshold in 11g */ 474#define IEEE80211_IOC_MCAST_RATE 72 /* tx rate for mcast frames */ 475#define IEEE80211_IOC_FRAGTHRESHOLD 73 /* tx fragmentation threshold */ 476#define IEEE80211_IOC_BURST 75 /* packet bursting */ 477#define IEEE80211_IOC_SCAN_RESULTS 76 /* get scan results */ 478#define IEEE80211_IOC_BMISSTHRESHOLD 77 /* beacon miss threshold */ 479#define IEEE80211_IOC_STA_INFO 78 /* station/neighbor info */ 480#define IEEE80211_IOC_WPAIE2 79 /* WPA+RSN info elements */ 481#define IEEE80211_IOC_CURCHAN 80 /* current channel */ 482#define IEEE80211_IOC_SHORTGI 81 /* 802.11n half GI */ 483#define IEEE80211_IOC_AMPDU 82 /* 802.11n A-MPDU (on, off) */ 484#define IEEE80211_IOC_AMPDU_LIMIT 83 /* A-MPDU length limit */ 485#define IEEE80211_IOC_AMPDU_DENSITY 84 /* A-MPDU density */ 486#define IEEE80211_IOC_AMSDU 85 /* 802.11n A-MSDU (on, off) */ 487#define IEEE80211_IOC_AMSDU_LIMIT 86 /* A-MSDU length limit */ 488#define IEEE80211_IOC_PUREN 87 /* pure 11n (no legacy sta's) */ 489#define IEEE80211_IOC_DOTH 88 /* 802.11h (on, off) */ 490#define IEEE80211_IOC_REGDOMAIN 89 /* regulatory domain */ 491#define IEEE80211_IOC_COUNTRYCODE 90 /* ISO country code */ 492#define IEEE80211_IOC_LOCATION 91 /* indoor/outdoor/anywhere */ 493#define IEEE80211_IOC_HTCOMPAT 92 /* support pre-D1.10 HT ie's */ 494#define IEEE80211_IOC_INACTIVITY 94 /* sta inactivity handling */ 495 496/* 497 * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS. 498 * Each result is a fixed size structure followed by a variable 499 * length SSID and one or more variable length information elements. 500 * The size of each variable length item is found in the fixed 501 * size structure and the entire length of the record is specified 502 * in isr_len. Result records are rounded to a multiple of 4 bytes. 503 */ 504struct ieee80211req_scan_result { 505 uint16_t isr_len; /* length (mult of 4) */ 506 uint16_t isr_ie_off; /* offset to IE data */ 507 uint16_t isr_ie_len; /* IE length */ 508 uint16_t isr_freq; /* MHz */ 509 uint16_t isr_flags; /* channel flags */ 510 int8_t isr_noise; 511 int8_t isr_rssi; 512 uint8_t isr_intval; /* beacon interval */ 513 uint8_t isr_capinfo; /* capabilities */ 514 uint8_t isr_erp; /* ERP element */ 515 uint8_t isr_bssid[IEEE80211_ADDR_LEN]; 516 uint8_t isr_nrates; 517 uint8_t isr_rates[IEEE80211_RATE_MAXSIZE]; 518 uint8_t isr_ssid_len; /* SSID length */ 519 /* variable length SSID followed by IE data */ 520}; 521 522struct ieee80211_clone_params { 523 char icp_parent[IFNAMSIZ]; /* parent device */ 524 int icp_opmode; /* operating mode */ 525}; 526#endif /* __FreeBSD__ */ 527 528#endif /* _NET80211_IEEE80211_IOCTL_H_ */ 529