if_run.c revision 243857
1/*- 2 * Copyright (c) 2008,2010 Damien Bergamini <damien.bergamini@free.fr> 3 * ported to FreeBSD by Akinori Furukoshi <moonlightakkiy@yahoo.ca> 4 * USB Consulting, Hans Petter Selasky <hselasky@freebsd.org> 5 * 6 * Permission to use, copy, modify, and distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19#include <sys/cdefs.h> 20__FBSDID("$FreeBSD: head/sys/dev/usb/wlan/if_run.c 243857 2012-12-04 09:32:43Z glebius $"); 21 22/*- 23 * Ralink Technology RT2700U/RT2800U/RT3000U chipset driver. 24 * http://www.ralinktech.com/ 25 */ 26 27#include <sys/param.h> 28#include <sys/sockio.h> 29#include <sys/sysctl.h> 30#include <sys/lock.h> 31#include <sys/mutex.h> 32#include <sys/mbuf.h> 33#include <sys/kernel.h> 34#include <sys/socket.h> 35#include <sys/systm.h> 36#include <sys/malloc.h> 37#include <sys/module.h> 38#include <sys/bus.h> 39#include <sys/endian.h> 40#include <sys/linker.h> 41#include <sys/firmware.h> 42#include <sys/kdb.h> 43 44#include <machine/bus.h> 45#include <machine/resource.h> 46#include <sys/rman.h> 47 48#include <net/bpf.h> 49#include <net/if.h> 50#include <net/if_arp.h> 51#include <net/ethernet.h> 52#include <net/if_dl.h> 53#include <net/if_media.h> 54#include <net/if_types.h> 55 56#include <netinet/in.h> 57#include <netinet/in_systm.h> 58#include <netinet/in_var.h> 59#include <netinet/if_ether.h> 60#include <netinet/ip.h> 61 62#include <net80211/ieee80211_var.h> 63#include <net80211/ieee80211_regdomain.h> 64#include <net80211/ieee80211_radiotap.h> 65#include <net80211/ieee80211_ratectl.h> 66 67#include <dev/usb/usb.h> 68#include <dev/usb/usbdi.h> 69#include "usbdevs.h" 70 71#define USB_DEBUG_VAR run_debug 72#include <dev/usb/usb_debug.h> 73 74#include <dev/usb/wlan/if_runreg.h> 75#include <dev/usb/wlan/if_runvar.h> 76 77#define N(_a) ((int)(sizeof((_a)) / sizeof((_a)[0]))) 78 79#ifdef USB_DEBUG 80#define RUN_DEBUG 81#endif 82 83#ifdef RUN_DEBUG 84int run_debug = 0; 85static SYSCTL_NODE(_hw_usb, OID_AUTO, run, CTLFLAG_RW, 0, "USB run"); 86SYSCTL_INT(_hw_usb_run, OID_AUTO, debug, CTLFLAG_RW, &run_debug, 0, 87 "run debug level"); 88#endif 89 90#define IEEE80211_HAS_ADDR4(wh) \ 91 (((wh)->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS) 92 93/* 94 * Because of LOR in run_key_delete(), use atomic instead. 95 * '& RUN_CMDQ_MASQ' is to loop cmdq[]. 96 */ 97#define RUN_CMDQ_GET(c) (atomic_fetchadd_32((c), 1) & RUN_CMDQ_MASQ) 98 99static const STRUCT_USB_HOST_ID run_devs[] = { 100#define RUN_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) } 101 RUN_DEV(ABOCOM, RT2770), 102 RUN_DEV(ABOCOM, RT2870), 103 RUN_DEV(ABOCOM, RT3070), 104 RUN_DEV(ABOCOM, RT3071), 105 RUN_DEV(ABOCOM, RT3072), 106 RUN_DEV(ABOCOM2, RT2870_1), 107 RUN_DEV(ACCTON, RT2770), 108 RUN_DEV(ACCTON, RT2870_1), 109 RUN_DEV(ACCTON, RT2870_2), 110 RUN_DEV(ACCTON, RT2870_3), 111 RUN_DEV(ACCTON, RT2870_4), 112 RUN_DEV(ACCTON, RT2870_5), 113 RUN_DEV(ACCTON, RT3070), 114 RUN_DEV(ACCTON, RT3070_1), 115 RUN_DEV(ACCTON, RT3070_2), 116 RUN_DEV(ACCTON, RT3070_3), 117 RUN_DEV(ACCTON, RT3070_4), 118 RUN_DEV(ACCTON, RT3070_5), 119 RUN_DEV(AIRTIES, RT3070), 120 RUN_DEV(ALLWIN, RT2070), 121 RUN_DEV(ALLWIN, RT2770), 122 RUN_DEV(ALLWIN, RT2870), 123 RUN_DEV(ALLWIN, RT3070), 124 RUN_DEV(ALLWIN, RT3071), 125 RUN_DEV(ALLWIN, RT3072), 126 RUN_DEV(ALLWIN, RT3572), 127 RUN_DEV(AMIGO, RT2870_1), 128 RUN_DEV(AMIGO, RT2870_2), 129 RUN_DEV(AMIT, CGWLUSB2GNR), 130 RUN_DEV(AMIT, RT2870_1), 131 RUN_DEV(AMIT2, RT2870), 132 RUN_DEV(ASUS, RT2870_1), 133 RUN_DEV(ASUS, RT2870_2), 134 RUN_DEV(ASUS, RT2870_3), 135 RUN_DEV(ASUS, RT2870_4), 136 RUN_DEV(ASUS, RT2870_5), 137 RUN_DEV(ASUS, USBN13), 138 RUN_DEV(ASUS, RT3070_1), 139 RUN_DEV(ASUS, USB_N53), 140 RUN_DEV(ASUS2, USBN11), 141 RUN_DEV(AZUREWAVE, RT2870_1), 142 RUN_DEV(AZUREWAVE, RT2870_2), 143 RUN_DEV(AZUREWAVE, RT3070_1), 144 RUN_DEV(AZUREWAVE, RT3070_2), 145 RUN_DEV(AZUREWAVE, RT3070_3), 146 RUN_DEV(BELKIN, F5D8053V3), 147 RUN_DEV(BELKIN, F5D8055), 148 RUN_DEV(BELKIN, F5D8055V2), 149 RUN_DEV(BELKIN, F6D4050V1), 150 RUN_DEV(BELKIN, RT2870_1), 151 RUN_DEV(BELKIN, RT2870_2), 152 RUN_DEV(CISCOLINKSYS, AE1000), 153 RUN_DEV(CISCOLINKSYS2, RT3070), 154 RUN_DEV(CISCOLINKSYS3, RT3070), 155 RUN_DEV(CONCEPTRONIC2, RT2870_1), 156 RUN_DEV(CONCEPTRONIC2, RT2870_2), 157 RUN_DEV(CONCEPTRONIC2, RT2870_3), 158 RUN_DEV(CONCEPTRONIC2, RT2870_4), 159 RUN_DEV(CONCEPTRONIC2, RT2870_5), 160 RUN_DEV(CONCEPTRONIC2, RT2870_6), 161 RUN_DEV(CONCEPTRONIC2, RT2870_7), 162 RUN_DEV(CONCEPTRONIC2, RT2870_8), 163 RUN_DEV(CONCEPTRONIC2, RT3070_1), 164 RUN_DEV(CONCEPTRONIC2, RT3070_2), 165 RUN_DEV(CONCEPTRONIC2, VIGORN61), 166 RUN_DEV(COREGA, CGWLUSB300GNM), 167 RUN_DEV(COREGA, RT2870_1), 168 RUN_DEV(COREGA, RT2870_2), 169 RUN_DEV(COREGA, RT2870_3), 170 RUN_DEV(COREGA, RT3070), 171 RUN_DEV(CYBERTAN, RT2870), 172 RUN_DEV(DLINK, RT2870), 173 RUN_DEV(DLINK, RT3072), 174 RUN_DEV(DLINK2, DWA130), 175 RUN_DEV(DLINK2, RT2870_1), 176 RUN_DEV(DLINK2, RT2870_2), 177 RUN_DEV(DLINK2, RT3070_1), 178 RUN_DEV(DLINK2, RT3070_2), 179 RUN_DEV(DLINK2, RT3070_3), 180 RUN_DEV(DLINK2, RT3070_4), 181 RUN_DEV(DLINK2, RT3070_5), 182 RUN_DEV(DLINK2, RT3072), 183 RUN_DEV(DLINK2, RT3072_1), 184 RUN_DEV(EDIMAX, EW7717), 185 RUN_DEV(EDIMAX, EW7718), 186 RUN_DEV(EDIMAX, RT2870_1), 187 RUN_DEV(ENCORE, RT3070_1), 188 RUN_DEV(ENCORE, RT3070_2), 189 RUN_DEV(ENCORE, RT3070_3), 190 RUN_DEV(GIGABYTE, GNWB31N), 191 RUN_DEV(GIGABYTE, GNWB32L), 192 RUN_DEV(GIGABYTE, RT2870_1), 193 RUN_DEV(GIGASET, RT3070_1), 194 RUN_DEV(GIGASET, RT3070_2), 195 RUN_DEV(GUILLEMOT, HWNU300), 196 RUN_DEV(HAWKING, HWUN2), 197 RUN_DEV(HAWKING, RT2870_1), 198 RUN_DEV(HAWKING, RT2870_2), 199 RUN_DEV(HAWKING, RT3070), 200 RUN_DEV(IODATA, RT3072_1), 201 RUN_DEV(IODATA, RT3072_2), 202 RUN_DEV(IODATA, RT3072_3), 203 RUN_DEV(IODATA, RT3072_4), 204 RUN_DEV(LINKSYS4, RT3070), 205 RUN_DEV(LINKSYS4, WUSB100), 206 RUN_DEV(LINKSYS4, WUSB54GCV3), 207 RUN_DEV(LINKSYS4, WUSB600N), 208 RUN_DEV(LINKSYS4, WUSB600NV2), 209 RUN_DEV(LOGITEC, RT2870_1), 210 RUN_DEV(LOGITEC, RT2870_2), 211 RUN_DEV(LOGITEC, RT2870_3), 212 RUN_DEV(LOGITEC, LANW300NU2), 213 RUN_DEV(LOGITEC, LANW150NU2), 214 RUN_DEV(MELCO, RT2870_1), 215 RUN_DEV(MELCO, RT2870_2), 216 RUN_DEV(MELCO, WLIUCAG300N), 217 RUN_DEV(MELCO, WLIUCG300N), 218 RUN_DEV(MELCO, WLIUCG301N), 219 RUN_DEV(MELCO, WLIUCGN), 220 RUN_DEV(MELCO, WLIUCGNM), 221 RUN_DEV(MELCO, WLIUCGNM2), 222 RUN_DEV(MOTOROLA4, RT2770), 223 RUN_DEV(MOTOROLA4, RT3070), 224 RUN_DEV(MSI, RT3070_1), 225 RUN_DEV(MSI, RT3070_2), 226 RUN_DEV(MSI, RT3070_3), 227 RUN_DEV(MSI, RT3070_4), 228 RUN_DEV(MSI, RT3070_5), 229 RUN_DEV(MSI, RT3070_6), 230 RUN_DEV(MSI, RT3070_7), 231 RUN_DEV(MSI, RT3070_8), 232 RUN_DEV(MSI, RT3070_9), 233 RUN_DEV(MSI, RT3070_10), 234 RUN_DEV(MSI, RT3070_11), 235 RUN_DEV(OVISLINK, RT3072), 236 RUN_DEV(PARA, RT3070), 237 RUN_DEV(PEGATRON, RT2870), 238 RUN_DEV(PEGATRON, RT3070), 239 RUN_DEV(PEGATRON, RT3070_2), 240 RUN_DEV(PEGATRON, RT3070_3), 241 RUN_DEV(PHILIPS, RT2870), 242 RUN_DEV(PLANEX2, GWUS300MINIS), 243 RUN_DEV(PLANEX2, GWUSMICRON), 244 RUN_DEV(PLANEX2, RT2870), 245 RUN_DEV(PLANEX2, RT3070), 246 RUN_DEV(QCOM, RT2870), 247 RUN_DEV(QUANTA, RT3070), 248 RUN_DEV(RALINK, RT2070), 249 RUN_DEV(RALINK, RT2770), 250 RUN_DEV(RALINK, RT2870), 251 RUN_DEV(RALINK, RT3070), 252 RUN_DEV(RALINK, RT3071), 253 RUN_DEV(RALINK, RT3072), 254 RUN_DEV(RALINK, RT3370), 255 RUN_DEV(RALINK, RT3572), 256 RUN_DEV(RALINK, RT8070), 257 RUN_DEV(SAMSUNG, WIS09ABGN), 258 RUN_DEV(SAMSUNG2, RT2870_1), 259 RUN_DEV(SENAO, RT2870_1), 260 RUN_DEV(SENAO, RT2870_2), 261 RUN_DEV(SENAO, RT2870_3), 262 RUN_DEV(SENAO, RT2870_4), 263 RUN_DEV(SENAO, RT3070), 264 RUN_DEV(SENAO, RT3071), 265 RUN_DEV(SENAO, RT3072_1), 266 RUN_DEV(SENAO, RT3072_2), 267 RUN_DEV(SENAO, RT3072_3), 268 RUN_DEV(SENAO, RT3072_4), 269 RUN_DEV(SENAO, RT3072_5), 270 RUN_DEV(SITECOMEU, RT2770), 271 RUN_DEV(SITECOMEU, RT2870_1), 272 RUN_DEV(SITECOMEU, RT2870_2), 273 RUN_DEV(SITECOMEU, RT2870_3), 274 RUN_DEV(SITECOMEU, RT2870_4), 275 RUN_DEV(SITECOMEU, RT3070), 276 RUN_DEV(SITECOMEU, RT3070_2), 277 RUN_DEV(SITECOMEU, RT3070_3), 278 RUN_DEV(SITECOMEU, RT3070_4), 279 RUN_DEV(SITECOMEU, RT3071), 280 RUN_DEV(SITECOMEU, RT3072_1), 281 RUN_DEV(SITECOMEU, RT3072_2), 282 RUN_DEV(SITECOMEU, RT3072_3), 283 RUN_DEV(SITECOMEU, RT3072_4), 284 RUN_DEV(SITECOMEU, RT3072_5), 285 RUN_DEV(SITECOMEU, RT3072_6), 286 RUN_DEV(SITECOMEU, WL608), 287 RUN_DEV(SPARKLAN, RT2870_1), 288 RUN_DEV(SPARKLAN, RT3070), 289 RUN_DEV(SWEEX2, LW153), 290 RUN_DEV(SWEEX2, LW303), 291 RUN_DEV(SWEEX2, LW313), 292 RUN_DEV(TOSHIBA, RT3070), 293 RUN_DEV(UMEDIA, RT2870_1), 294 RUN_DEV(ZCOM, RT2870_1), 295 RUN_DEV(ZCOM, RT2870_2), 296 RUN_DEV(ZINWELL, RT2870_1), 297 RUN_DEV(ZINWELL, RT2870_2), 298 RUN_DEV(ZINWELL, RT3070), 299 RUN_DEV(ZINWELL, RT3072_1), 300 RUN_DEV(ZINWELL, RT3072_2), 301 RUN_DEV(ZYXEL, RT2870_1), 302 RUN_DEV(ZYXEL, RT2870_2), 303#undef RUN_DEV 304}; 305 306static device_probe_t run_match; 307static device_attach_t run_attach; 308static device_detach_t run_detach; 309 310static usb_callback_t run_bulk_rx_callback; 311static usb_callback_t run_bulk_tx_callback0; 312static usb_callback_t run_bulk_tx_callback1; 313static usb_callback_t run_bulk_tx_callback2; 314static usb_callback_t run_bulk_tx_callback3; 315static usb_callback_t run_bulk_tx_callback4; 316static usb_callback_t run_bulk_tx_callback5; 317 318static void run_bulk_tx_callbackN(struct usb_xfer *xfer, 319 usb_error_t error, unsigned int index); 320static struct ieee80211vap *run_vap_create(struct ieee80211com *, 321 const char [IFNAMSIZ], int, enum ieee80211_opmode, int, 322 const uint8_t [IEEE80211_ADDR_LEN], 323 const uint8_t [IEEE80211_ADDR_LEN]); 324static void run_vap_delete(struct ieee80211vap *); 325static void run_cmdq_cb(void *, int); 326static void run_setup_tx_list(struct run_softc *, 327 struct run_endpoint_queue *); 328static void run_unsetup_tx_list(struct run_softc *, 329 struct run_endpoint_queue *); 330static int run_load_microcode(struct run_softc *); 331static int run_reset(struct run_softc *); 332static usb_error_t run_do_request(struct run_softc *, 333 struct usb_device_request *, void *); 334static int run_read(struct run_softc *, uint16_t, uint32_t *); 335static int run_read_region_1(struct run_softc *, uint16_t, uint8_t *, int); 336static int run_write_2(struct run_softc *, uint16_t, uint16_t); 337static int run_write(struct run_softc *, uint16_t, uint32_t); 338static int run_write_region_1(struct run_softc *, uint16_t, 339 const uint8_t *, int); 340static int run_set_region_4(struct run_softc *, uint16_t, uint32_t, int); 341static int run_efuse_read_2(struct run_softc *, uint16_t, uint16_t *); 342static int run_eeprom_read_2(struct run_softc *, uint16_t, uint16_t *); 343static int run_rt2870_rf_write(struct run_softc *, uint8_t, uint32_t); 344static int run_rt3070_rf_read(struct run_softc *, uint8_t, uint8_t *); 345static int run_rt3070_rf_write(struct run_softc *, uint8_t, uint8_t); 346static int run_bbp_read(struct run_softc *, uint8_t, uint8_t *); 347static int run_bbp_write(struct run_softc *, uint8_t, uint8_t); 348static int run_mcu_cmd(struct run_softc *, uint8_t, uint16_t); 349static const char *run_get_rf(int); 350static int run_read_eeprom(struct run_softc *); 351static struct ieee80211_node *run_node_alloc(struct ieee80211vap *, 352 const uint8_t mac[IEEE80211_ADDR_LEN]); 353static int run_media_change(struct ifnet *); 354static int run_newstate(struct ieee80211vap *, enum ieee80211_state, int); 355static int run_wme_update(struct ieee80211com *); 356static void run_wme_update_cb(void *); 357static void run_key_update_begin(struct ieee80211vap *); 358static void run_key_update_end(struct ieee80211vap *); 359static void run_key_set_cb(void *); 360static int run_key_set(struct ieee80211vap *, struct ieee80211_key *, 361 const uint8_t mac[IEEE80211_ADDR_LEN]); 362static void run_key_delete_cb(void *); 363static int run_key_delete(struct ieee80211vap *, struct ieee80211_key *); 364static void run_ratectl_to(void *); 365static void run_ratectl_cb(void *, int); 366static void run_drain_fifo(void *); 367static void run_iter_func(void *, struct ieee80211_node *); 368static void run_newassoc_cb(void *); 369static void run_newassoc(struct ieee80211_node *, int); 370static void run_rx_frame(struct run_softc *, struct mbuf *, uint32_t); 371static void run_tx_free(struct run_endpoint_queue *pq, 372 struct run_tx_data *, int); 373static void run_set_tx_desc(struct run_softc *, struct run_tx_data *); 374static int run_tx(struct run_softc *, struct mbuf *, 375 struct ieee80211_node *); 376static int run_tx_mgt(struct run_softc *, struct mbuf *, 377 struct ieee80211_node *); 378static int run_sendprot(struct run_softc *, const struct mbuf *, 379 struct ieee80211_node *, int, int); 380static int run_tx_param(struct run_softc *, struct mbuf *, 381 struct ieee80211_node *, 382 const struct ieee80211_bpf_params *); 383static int run_raw_xmit(struct ieee80211_node *, struct mbuf *, 384 const struct ieee80211_bpf_params *); 385static void run_start(struct ifnet *); 386static int run_ioctl(struct ifnet *, u_long, caddr_t); 387static void run_set_agc(struct run_softc *, uint8_t); 388static void run_select_chan_group(struct run_softc *, int); 389static void run_set_rx_antenna(struct run_softc *, int); 390static void run_rt2870_set_chan(struct run_softc *, u_int); 391static void run_rt3070_set_chan(struct run_softc *, u_int); 392static void run_rt3572_set_chan(struct run_softc *, u_int); 393static int run_set_chan(struct run_softc *, struct ieee80211_channel *); 394static void run_set_channel(struct ieee80211com *); 395static void run_scan_start(struct ieee80211com *); 396static void run_scan_end(struct ieee80211com *); 397static void run_update_beacon(struct ieee80211vap *, int); 398static void run_update_beacon_cb(void *); 399static void run_updateprot(struct ieee80211com *); 400static void run_updateprot_cb(void *); 401static void run_usb_timeout_cb(void *); 402static void run_reset_livelock(struct run_softc *); 403static void run_enable_tsf_sync(struct run_softc *); 404static void run_enable_mrr(struct run_softc *); 405static void run_set_txpreamble(struct run_softc *); 406static void run_set_basicrates(struct run_softc *); 407static void run_set_leds(struct run_softc *, uint16_t); 408static void run_set_bssid(struct run_softc *, const uint8_t *); 409static void run_set_macaddr(struct run_softc *, const uint8_t *); 410static void run_updateslot(struct ifnet *); 411static void run_updateslot_cb(void *); 412static void run_update_mcast(struct ifnet *); 413static int8_t run_rssi2dbm(struct run_softc *, uint8_t, uint8_t); 414static void run_update_promisc_locked(struct ifnet *); 415static void run_update_promisc(struct ifnet *); 416static int run_bbp_init(struct run_softc *); 417static int run_rt3070_rf_init(struct run_softc *); 418static int run_rt3070_filter_calib(struct run_softc *, uint8_t, uint8_t, 419 uint8_t *); 420static void run_rt3070_rf_setup(struct run_softc *); 421static int run_txrx_enable(struct run_softc *); 422static void run_init(void *); 423static void run_init_locked(struct run_softc *); 424static void run_stop(void *); 425static void run_delay(struct run_softc *, unsigned int); 426 427static const struct { 428 uint16_t reg; 429 uint32_t val; 430} rt2870_def_mac[] = { 431 RT2870_DEF_MAC 432}; 433 434static const struct { 435 uint8_t reg; 436 uint8_t val; 437} rt2860_def_bbp[] = { 438 RT2860_DEF_BBP 439}; 440 441static const struct rfprog { 442 uint8_t chan; 443 uint32_t r1, r2, r3, r4; 444} rt2860_rf2850[] = { 445 RT2860_RF2850 446}; 447 448struct { 449 uint8_t n, r, k; 450} rt3070_freqs[] = { 451 RT3070_RF3052 452}; 453 454static const struct { 455 uint8_t reg; 456 uint8_t val; 457} rt3070_def_rf[] = { 458 RT3070_DEF_RF 459},rt3572_def_rf[] = { 460 RT3572_DEF_RF 461}; 462 463static const struct usb_config run_config[RUN_N_XFER] = { 464 [RUN_BULK_TX_BE] = { 465 .type = UE_BULK, 466 .endpoint = UE_ADDR_ANY, 467 .ep_index = 0, 468 .direction = UE_DIR_OUT, 469 .bufsize = RUN_MAX_TXSZ, 470 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 471 .callback = run_bulk_tx_callback0, 472 .timeout = 5000, /* ms */ 473 }, 474 [RUN_BULK_TX_BK] = { 475 .type = UE_BULK, 476 .endpoint = UE_ADDR_ANY, 477 .direction = UE_DIR_OUT, 478 .ep_index = 1, 479 .bufsize = RUN_MAX_TXSZ, 480 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 481 .callback = run_bulk_tx_callback1, 482 .timeout = 5000, /* ms */ 483 }, 484 [RUN_BULK_TX_VI] = { 485 .type = UE_BULK, 486 .endpoint = UE_ADDR_ANY, 487 .direction = UE_DIR_OUT, 488 .ep_index = 2, 489 .bufsize = RUN_MAX_TXSZ, 490 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 491 .callback = run_bulk_tx_callback2, 492 .timeout = 5000, /* ms */ 493 }, 494 [RUN_BULK_TX_VO] = { 495 .type = UE_BULK, 496 .endpoint = UE_ADDR_ANY, 497 .direction = UE_DIR_OUT, 498 .ep_index = 3, 499 .bufsize = RUN_MAX_TXSZ, 500 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 501 .callback = run_bulk_tx_callback3, 502 .timeout = 5000, /* ms */ 503 }, 504 [RUN_BULK_TX_HCCA] = { 505 .type = UE_BULK, 506 .endpoint = UE_ADDR_ANY, 507 .direction = UE_DIR_OUT, 508 .ep_index = 4, 509 .bufsize = RUN_MAX_TXSZ, 510 .flags = {.pipe_bof = 1,.force_short_xfer = 1,.no_pipe_ok = 1,}, 511 .callback = run_bulk_tx_callback4, 512 .timeout = 5000, /* ms */ 513 }, 514 [RUN_BULK_TX_PRIO] = { 515 .type = UE_BULK, 516 .endpoint = UE_ADDR_ANY, 517 .direction = UE_DIR_OUT, 518 .ep_index = 5, 519 .bufsize = RUN_MAX_TXSZ, 520 .flags = {.pipe_bof = 1,.force_short_xfer = 1,.no_pipe_ok = 1,}, 521 .callback = run_bulk_tx_callback5, 522 .timeout = 5000, /* ms */ 523 }, 524 [RUN_BULK_RX] = { 525 .type = UE_BULK, 526 .endpoint = UE_ADDR_ANY, 527 .direction = UE_DIR_IN, 528 .bufsize = RUN_MAX_RXSZ, 529 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 530 .callback = run_bulk_rx_callback, 531 } 532}; 533 534static int 535run_match(device_t self) 536{ 537 struct usb_attach_arg *uaa = device_get_ivars(self); 538 539 if (uaa->usb_mode != USB_MODE_HOST) 540 return (ENXIO); 541 if (uaa->info.bConfigIndex != 0) 542 return (ENXIO); 543 if (uaa->info.bIfaceIndex != RT2860_IFACE_INDEX) 544 return (ENXIO); 545 546 return (usbd_lookup_id_by_uaa(run_devs, sizeof(run_devs), uaa)); 547} 548 549static int 550run_attach(device_t self) 551{ 552 struct run_softc *sc = device_get_softc(self); 553 struct usb_attach_arg *uaa = device_get_ivars(self); 554 struct ieee80211com *ic; 555 struct ifnet *ifp; 556 uint32_t ver; 557 int i, ntries, error; 558 uint8_t iface_index, bands; 559 560 device_set_usb_desc(self); 561 sc->sc_udev = uaa->device; 562 sc->sc_dev = self; 563 564 mtx_init(&sc->sc_mtx, device_get_nameunit(sc->sc_dev), 565 MTX_NETWORK_LOCK, MTX_DEF); 566 567 iface_index = RT2860_IFACE_INDEX; 568 569 error = usbd_transfer_setup(uaa->device, &iface_index, 570 sc->sc_xfer, run_config, RUN_N_XFER, sc, &sc->sc_mtx); 571 if (error) { 572 device_printf(self, "could not allocate USB transfers, " 573 "err=%s\n", usbd_errstr(error)); 574 goto detach; 575 } 576 577 RUN_LOCK(sc); 578 579 /* wait for the chip to settle */ 580 for (ntries = 0; ntries < 100; ntries++) { 581 if (run_read(sc, RT2860_ASIC_VER_ID, &ver) != 0) { 582 RUN_UNLOCK(sc); 583 goto detach; 584 } 585 if (ver != 0 && ver != 0xffffffff) 586 break; 587 run_delay(sc, 10); 588 } 589 if (ntries == 100) { 590 device_printf(sc->sc_dev, 591 "timeout waiting for NIC to initialize\n"); 592 RUN_UNLOCK(sc); 593 goto detach; 594 } 595 sc->mac_ver = ver >> 16; 596 sc->mac_rev = ver & 0xffff; 597 598 /* retrieve RF rev. no and various other things from EEPROM */ 599 run_read_eeprom(sc); 600 601 device_printf(sc->sc_dev, 602 "MAC/BBP RT%04X (rev 0x%04X), RF %s (MIMO %dT%dR), address %s\n", 603 sc->mac_ver, sc->mac_rev, run_get_rf(sc->rf_rev), 604 sc->ntxchains, sc->nrxchains, ether_sprintf(sc->sc_bssid)); 605 606 RUN_UNLOCK(sc); 607 608 ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211); 609 if (ifp == NULL) { 610 device_printf(sc->sc_dev, "can not if_alloc()\n"); 611 goto detach; 612 } 613 ic = ifp->if_l2com; 614 615 ifp->if_softc = sc; 616 if_initname(ifp, "run", device_get_unit(sc->sc_dev)); 617 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 618 ifp->if_init = run_init; 619 ifp->if_ioctl = run_ioctl; 620 ifp->if_start = run_start; 621 IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen); 622 ifp->if_snd.ifq_drv_maxlen = ifqmaxlen; 623 IFQ_SET_READY(&ifp->if_snd); 624 625 ic->ic_ifp = ifp; 626 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 627 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 628 629 /* set device capabilities */ 630 ic->ic_caps = 631 IEEE80211_C_STA | /* station mode supported */ 632 IEEE80211_C_MONITOR | /* monitor mode supported */ 633 IEEE80211_C_IBSS | 634 IEEE80211_C_HOSTAP | 635 IEEE80211_C_WDS | /* 4-address traffic works */ 636 IEEE80211_C_MBSS | 637 IEEE80211_C_SHPREAMBLE | /* short preamble supported */ 638 IEEE80211_C_SHSLOT | /* short slot time supported */ 639 IEEE80211_C_WME | /* WME */ 640 IEEE80211_C_WPA; /* WPA1|WPA2(RSN) */ 641 642 ic->ic_cryptocaps = 643 IEEE80211_CRYPTO_WEP | 644 IEEE80211_CRYPTO_AES_CCM | 645 IEEE80211_CRYPTO_TKIPMIC | 646 IEEE80211_CRYPTO_TKIP; 647 648 ic->ic_flags |= IEEE80211_F_DATAPAD; 649 ic->ic_flags_ext |= IEEE80211_FEXT_SWBMISS; 650 651 bands = 0; 652 setbit(&bands, IEEE80211_MODE_11B); 653 setbit(&bands, IEEE80211_MODE_11G); 654 ieee80211_init_channels(ic, NULL, &bands); 655 656 /* 657 * Do this by own because h/w supports 658 * more channels than ieee80211_init_channels() 659 */ 660 if (sc->rf_rev == RT2860_RF_2750 || 661 sc->rf_rev == RT2860_RF_2850 || 662 sc->rf_rev == RT3070_RF_3052) { 663 /* set supported .11a rates */ 664 for (i = 14; i < N(rt2860_rf2850); i++) { 665 uint8_t chan = rt2860_rf2850[i].chan; 666 ic->ic_channels[ic->ic_nchans].ic_freq = 667 ieee80211_ieee2mhz(chan, IEEE80211_CHAN_A); 668 ic->ic_channels[ic->ic_nchans].ic_ieee = chan; 669 ic->ic_channels[ic->ic_nchans].ic_flags = IEEE80211_CHAN_A; 670 ic->ic_channels[ic->ic_nchans].ic_extieee = 0; 671 ic->ic_nchans++; 672 } 673 } 674 675 ieee80211_ifattach(ic, sc->sc_bssid); 676 677 ic->ic_scan_start = run_scan_start; 678 ic->ic_scan_end = run_scan_end; 679 ic->ic_set_channel = run_set_channel; 680 ic->ic_node_alloc = run_node_alloc; 681 ic->ic_newassoc = run_newassoc; 682 ic->ic_updateslot = run_updateslot; 683 ic->ic_update_mcast = run_update_mcast; 684 ic->ic_wme.wme_update = run_wme_update; 685 ic->ic_raw_xmit = run_raw_xmit; 686 ic->ic_update_promisc = run_update_promisc; 687 688 ic->ic_vap_create = run_vap_create; 689 ic->ic_vap_delete = run_vap_delete; 690 691 ieee80211_radiotap_attach(ic, 692 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 693 RUN_TX_RADIOTAP_PRESENT, 694 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 695 RUN_RX_RADIOTAP_PRESENT); 696 697 TASK_INIT(&sc->cmdq_task, 0, run_cmdq_cb, sc); 698 TASK_INIT(&sc->ratectl_task, 0, run_ratectl_cb, sc); 699 callout_init((struct callout *)&sc->ratectl_ch, 1); 700 701 if (bootverbose) 702 ieee80211_announce(ic); 703 704 return (0); 705 706detach: 707 run_detach(self); 708 return (ENXIO); 709} 710 711static int 712run_detach(device_t self) 713{ 714 struct run_softc *sc = device_get_softc(self); 715 struct ifnet *ifp = sc->sc_ifp; 716 struct ieee80211com *ic; 717 int i; 718 719 /* stop all USB transfers */ 720 usbd_transfer_unsetup(sc->sc_xfer, RUN_N_XFER); 721 722 RUN_LOCK(sc); 723 724 sc->ratectl_run = RUN_RATECTL_OFF; 725 sc->cmdq_run = sc->cmdq_key_set = RUN_CMDQ_ABORT; 726 727 /* free TX list, if any */ 728 for (i = 0; i != RUN_EP_QUEUES; i++) 729 run_unsetup_tx_list(sc, &sc->sc_epq[i]); 730 RUN_UNLOCK(sc); 731 732 if (ifp) { 733 ic = ifp->if_l2com; 734 /* drain tasks */ 735 usb_callout_drain(&sc->ratectl_ch); 736 ieee80211_draintask(ic, &sc->cmdq_task); 737 ieee80211_draintask(ic, &sc->ratectl_task); 738 ieee80211_ifdetach(ic); 739 if_free(ifp); 740 } 741 742 mtx_destroy(&sc->sc_mtx); 743 744 return (0); 745} 746 747static struct ieee80211vap * 748run_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 749 enum ieee80211_opmode opmode, int flags, 750 const uint8_t bssid[IEEE80211_ADDR_LEN], 751 const uint8_t mac[IEEE80211_ADDR_LEN]) 752{ 753 struct ifnet *ifp = ic->ic_ifp; 754 struct run_softc *sc = ifp->if_softc; 755 struct run_vap *rvp; 756 struct ieee80211vap *vap; 757 int i; 758 759 if (sc->rvp_cnt >= RUN_VAP_MAX) { 760 if_printf(ifp, "number of VAPs maxed out\n"); 761 return (NULL); 762 } 763 764 switch (opmode) { 765 case IEEE80211_M_STA: 766 /* enable s/w bmiss handling for sta mode */ 767 flags |= IEEE80211_CLONE_NOBEACONS; 768 /* fall though */ 769 case IEEE80211_M_IBSS: 770 case IEEE80211_M_MONITOR: 771 case IEEE80211_M_HOSTAP: 772 case IEEE80211_M_MBSS: 773 /* other than WDS vaps, only one at a time */ 774 if (!TAILQ_EMPTY(&ic->ic_vaps)) 775 return (NULL); 776 break; 777 case IEEE80211_M_WDS: 778 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next){ 779 if(vap->iv_opmode != IEEE80211_M_HOSTAP) 780 continue; 781 /* WDS vap's always share the local mac address. */ 782 flags &= ~IEEE80211_CLONE_BSSID; 783 break; 784 } 785 if (vap == NULL) { 786 if_printf(ifp, "wds only supported in ap mode\n"); 787 return (NULL); 788 } 789 break; 790 default: 791 if_printf(ifp, "unknown opmode %d\n", opmode); 792 return (NULL); 793 } 794 795 rvp = (struct run_vap *) malloc(sizeof(struct run_vap), 796 M_80211_VAP, M_NOWAIT | M_ZERO); 797 if (rvp == NULL) 798 return (NULL); 799 vap = &rvp->vap; 800 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac); 801 802 vap->iv_key_update_begin = run_key_update_begin; 803 vap->iv_key_update_end = run_key_update_end; 804 vap->iv_update_beacon = run_update_beacon; 805 vap->iv_max_aid = RT2870_WCID_MAX; 806 /* 807 * To delete the right key from h/w, we need wcid. 808 * Luckily, there is unused space in ieee80211_key{}, wk_pad, 809 * and matching wcid will be written into there. So, cast 810 * some spells to remove 'const' from ieee80211_key{} 811 */ 812 vap->iv_key_delete = (void *)run_key_delete; 813 vap->iv_key_set = (void *)run_key_set; 814 815 /* override state transition machine */ 816 rvp->newstate = vap->iv_newstate; 817 vap->iv_newstate = run_newstate; 818 819 ieee80211_ratectl_init(vap); 820 ieee80211_ratectl_setinterval(vap, 1000 /* 1 sec */); 821 822 /* complete setup */ 823 ieee80211_vap_attach(vap, run_media_change, ieee80211_media_status); 824 825 /* make sure id is always unique */ 826 for (i = 0; i < RUN_VAP_MAX; i++) { 827 if((sc->rvp_bmap & 1 << i) == 0){ 828 sc->rvp_bmap |= 1 << i; 829 rvp->rvp_id = i; 830 break; 831 } 832 } 833 if (sc->rvp_cnt++ == 0) 834 ic->ic_opmode = opmode; 835 836 if (opmode == IEEE80211_M_HOSTAP) 837 sc->cmdq_run = RUN_CMDQ_GO; 838 839 DPRINTF("rvp_id=%d bmap=%x rvp_cnt=%d\n", 840 rvp->rvp_id, sc->rvp_bmap, sc->rvp_cnt); 841 842 return (vap); 843} 844 845static void 846run_vap_delete(struct ieee80211vap *vap) 847{ 848 struct run_vap *rvp = RUN_VAP(vap); 849 struct ifnet *ifp; 850 struct ieee80211com *ic; 851 struct run_softc *sc; 852 uint8_t rvp_id; 853 854 if (vap == NULL) 855 return; 856 857 ic = vap->iv_ic; 858 ifp = ic->ic_ifp; 859 860 sc = ifp->if_softc; 861 862 RUN_LOCK(sc); 863 864 m_freem(rvp->beacon_mbuf); 865 rvp->beacon_mbuf = NULL; 866 867 rvp_id = rvp->rvp_id; 868 sc->ratectl_run &= ~(1 << rvp_id); 869 sc->rvp_bmap &= ~(1 << rvp_id); 870 run_set_region_4(sc, RT2860_SKEY(rvp_id, 0), 0, 128); 871 run_set_region_4(sc, RT2860_BCN_BASE(rvp_id), 0, 512); 872 --sc->rvp_cnt; 873 874 DPRINTF("vap=%p rvp_id=%d bmap=%x rvp_cnt=%d\n", 875 vap, rvp_id, sc->rvp_bmap, sc->rvp_cnt); 876 877 RUN_UNLOCK(sc); 878 879 ieee80211_ratectl_deinit(vap); 880 ieee80211_vap_detach(vap); 881 free(rvp, M_80211_VAP); 882} 883 884/* 885 * There are numbers of functions need to be called in context thread. 886 * Rather than creating taskqueue event for each of those functions, 887 * here is all-for-one taskqueue callback function. This function 888 * gurantees deferred functions are executed in the same order they 889 * were enqueued. 890 * '& RUN_CMDQ_MASQ' is to loop cmdq[]. 891 */ 892static void 893run_cmdq_cb(void *arg, int pending) 894{ 895 struct run_softc *sc = arg; 896 uint8_t i; 897 898 /* call cmdq[].func locked */ 899 RUN_LOCK(sc); 900 for (i = sc->cmdq_exec; sc->cmdq[i].func && pending; 901 i = sc->cmdq_exec, pending--) { 902 DPRINTFN(6, "cmdq_exec=%d pending=%d\n", i, pending); 903 if (sc->cmdq_run == RUN_CMDQ_GO) { 904 /* 905 * If arg0 is NULL, callback func needs more 906 * than one arg. So, pass ptr to cmdq struct. 907 */ 908 if (sc->cmdq[i].arg0) 909 sc->cmdq[i].func(sc->cmdq[i].arg0); 910 else 911 sc->cmdq[i].func(&sc->cmdq[i]); 912 } 913 sc->cmdq[i].arg0 = NULL; 914 sc->cmdq[i].func = NULL; 915 sc->cmdq_exec++; 916 sc->cmdq_exec &= RUN_CMDQ_MASQ; 917 } 918 RUN_UNLOCK(sc); 919} 920 921static void 922run_setup_tx_list(struct run_softc *sc, struct run_endpoint_queue *pq) 923{ 924 struct run_tx_data *data; 925 926 memset(pq, 0, sizeof(*pq)); 927 928 STAILQ_INIT(&pq->tx_qh); 929 STAILQ_INIT(&pq->tx_fh); 930 931 for (data = &pq->tx_data[0]; 932 data < &pq->tx_data[RUN_TX_RING_COUNT]; data++) { 933 data->sc = sc; 934 STAILQ_INSERT_TAIL(&pq->tx_fh, data, next); 935 } 936 pq->tx_nfree = RUN_TX_RING_COUNT; 937} 938 939static void 940run_unsetup_tx_list(struct run_softc *sc, struct run_endpoint_queue *pq) 941{ 942 struct run_tx_data *data; 943 944 /* make sure any subsequent use of the queues will fail */ 945 pq->tx_nfree = 0; 946 STAILQ_INIT(&pq->tx_fh); 947 STAILQ_INIT(&pq->tx_qh); 948 949 /* free up all node references and mbufs */ 950 for (data = &pq->tx_data[0]; 951 data < &pq->tx_data[RUN_TX_RING_COUNT]; data++) { 952 if (data->m != NULL) { 953 m_freem(data->m); 954 data->m = NULL; 955 } 956 if (data->ni != NULL) { 957 ieee80211_free_node(data->ni); 958 data->ni = NULL; 959 } 960 } 961} 962 963static int 964run_load_microcode(struct run_softc *sc) 965{ 966 usb_device_request_t req; 967 const struct firmware *fw; 968 const u_char *base; 969 uint32_t tmp; 970 int ntries, error; 971 const uint64_t *temp; 972 uint64_t bytes; 973 974 RUN_UNLOCK(sc); 975 fw = firmware_get("runfw"); 976 RUN_LOCK(sc); 977 if (fw == NULL) { 978 device_printf(sc->sc_dev, 979 "failed loadfirmware of file %s\n", "runfw"); 980 return ENOENT; 981 } 982 983 if (fw->datasize != 8192) { 984 device_printf(sc->sc_dev, 985 "invalid firmware size (should be 8KB)\n"); 986 error = EINVAL; 987 goto fail; 988 } 989 990 /* 991 * RT3071/RT3072 use a different firmware 992 * run-rt2870 (8KB) contains both, 993 * first half (4KB) is for rt2870, 994 * last half is for rt3071. 995 */ 996 base = fw->data; 997 if ((sc->mac_ver) != 0x2860 && 998 (sc->mac_ver) != 0x2872 && 999 (sc->mac_ver) != 0x3070) { 1000 base += 4096; 1001 } 1002 1003 /* cheap sanity check */ 1004 temp = fw->data; 1005 bytes = *temp; 1006 if (bytes != be64toh(0xffffff0210280210)) { 1007 device_printf(sc->sc_dev, "firmware checksum failed\n"); 1008 error = EINVAL; 1009 goto fail; 1010 } 1011 1012 run_read(sc, RT2860_ASIC_VER_ID, &tmp); 1013 /* write microcode image */ 1014 run_write_region_1(sc, RT2870_FW_BASE, base, 4096); 1015 run_write(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff); 1016 run_write(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff); 1017 1018 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1019 req.bRequest = RT2870_RESET; 1020 USETW(req.wValue, 8); 1021 USETW(req.wIndex, 0); 1022 USETW(req.wLength, 0); 1023 if ((error = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL)) 1024 != 0) { 1025 device_printf(sc->sc_dev, "firmware reset failed\n"); 1026 goto fail; 1027 } 1028 1029 run_delay(sc, 10); 1030 1031 run_write(sc, RT2860_H2M_MAILBOX, 0); 1032 if ((error = run_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0)) != 0) 1033 goto fail; 1034 1035 /* wait until microcontroller is ready */ 1036 for (ntries = 0; ntries < 1000; ntries++) { 1037 if ((error = run_read(sc, RT2860_SYS_CTRL, &tmp)) != 0) { 1038 goto fail; 1039 } 1040 if (tmp & RT2860_MCU_READY) 1041 break; 1042 run_delay(sc, 10); 1043 } 1044 if (ntries == 1000) { 1045 device_printf(sc->sc_dev, 1046 "timeout waiting for MCU to initialize\n"); 1047 error = ETIMEDOUT; 1048 goto fail; 1049 } 1050 device_printf(sc->sc_dev, "firmware %s ver. %u.%u loaded\n", 1051 (base == fw->data) ? "RT2870" : "RT3071", 1052 *(base + 4092), *(base + 4093)); 1053 1054fail: 1055 firmware_put(fw, FIRMWARE_UNLOAD); 1056 return (error); 1057} 1058 1059int 1060run_reset(struct run_softc *sc) 1061{ 1062 usb_device_request_t req; 1063 1064 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1065 req.bRequest = RT2870_RESET; 1066 USETW(req.wValue, 1); 1067 USETW(req.wIndex, 0); 1068 USETW(req.wLength, 0); 1069 return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL)); 1070} 1071 1072static usb_error_t 1073run_do_request(struct run_softc *sc, 1074 struct usb_device_request *req, void *data) 1075{ 1076 usb_error_t err; 1077 int ntries = 10; 1078 1079 RUN_LOCK_ASSERT(sc, MA_OWNED); 1080 1081 while (ntries--) { 1082 err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx, 1083 req, data, 0, NULL, 250 /* ms */); 1084 if (err == 0) 1085 break; 1086 DPRINTFN(1, "Control request failed, %s (retrying)\n", 1087 usbd_errstr(err)); 1088 run_delay(sc, 10); 1089 } 1090 return (err); 1091} 1092 1093static int 1094run_read(struct run_softc *sc, uint16_t reg, uint32_t *val) 1095{ 1096 uint32_t tmp; 1097 int error; 1098 1099 error = run_read_region_1(sc, reg, (uint8_t *)&tmp, sizeof tmp); 1100 if (error == 0) 1101 *val = le32toh(tmp); 1102 else 1103 *val = 0xffffffff; 1104 return (error); 1105} 1106 1107static int 1108run_read_region_1(struct run_softc *sc, uint16_t reg, uint8_t *buf, int len) 1109{ 1110 usb_device_request_t req; 1111 1112 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1113 req.bRequest = RT2870_READ_REGION_1; 1114 USETW(req.wValue, 0); 1115 USETW(req.wIndex, reg); 1116 USETW(req.wLength, len); 1117 1118 return (run_do_request(sc, &req, buf)); 1119} 1120 1121static int 1122run_write_2(struct run_softc *sc, uint16_t reg, uint16_t val) 1123{ 1124 usb_device_request_t req; 1125 1126 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1127 req.bRequest = RT2870_WRITE_2; 1128 USETW(req.wValue, val); 1129 USETW(req.wIndex, reg); 1130 USETW(req.wLength, 0); 1131 1132 return (run_do_request(sc, &req, NULL)); 1133} 1134 1135static int 1136run_write(struct run_softc *sc, uint16_t reg, uint32_t val) 1137{ 1138 int error; 1139 1140 if ((error = run_write_2(sc, reg, val & 0xffff)) == 0) 1141 error = run_write_2(sc, reg + 2, val >> 16); 1142 return (error); 1143} 1144 1145static int 1146run_write_region_1(struct run_softc *sc, uint16_t reg, const uint8_t *buf, 1147 int len) 1148{ 1149#if 1 1150 int i, error = 0; 1151 /* 1152 * NB: the WRITE_REGION_1 command is not stable on RT2860. 1153 * We thus issue multiple WRITE_2 commands instead. 1154 */ 1155 KASSERT((len & 1) == 0, ("run_write_region_1: Data too long.\n")); 1156 for (i = 0; i < len && error == 0; i += 2) 1157 error = run_write_2(sc, reg + i, buf[i] | buf[i + 1] << 8); 1158 return (error); 1159#else 1160 usb_device_request_t req; 1161 1162 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1163 req.bRequest = RT2870_WRITE_REGION_1; 1164 USETW(req.wValue, 0); 1165 USETW(req.wIndex, reg); 1166 USETW(req.wLength, len); 1167 return (run_do_request(sc, &req, buf)); 1168#endif 1169} 1170 1171static int 1172run_set_region_4(struct run_softc *sc, uint16_t reg, uint32_t val, int len) 1173{ 1174 int i, error = 0; 1175 1176 KASSERT((len & 3) == 0, ("run_set_region_4: Invalid data length.\n")); 1177 for (i = 0; i < len && error == 0; i += 4) 1178 error = run_write(sc, reg + i, val); 1179 return (error); 1180} 1181 1182/* Read 16-bit from eFUSE ROM (RT3070 only.) */ 1183static int 1184run_efuse_read_2(struct run_softc *sc, uint16_t addr, uint16_t *val) 1185{ 1186 uint32_t tmp; 1187 uint16_t reg; 1188 int error, ntries; 1189 1190 if ((error = run_read(sc, RT3070_EFUSE_CTRL, &tmp)) != 0) 1191 return (error); 1192 1193 addr *= 2; 1194 /*- 1195 * Read one 16-byte block into registers EFUSE_DATA[0-3]: 1196 * DATA0: F E D C 1197 * DATA1: B A 9 8 1198 * DATA2: 7 6 5 4 1199 * DATA3: 3 2 1 0 1200 */ 1201 tmp &= ~(RT3070_EFSROM_MODE_MASK | RT3070_EFSROM_AIN_MASK); 1202 tmp |= (addr & ~0xf) << RT3070_EFSROM_AIN_SHIFT | RT3070_EFSROM_KICK; 1203 run_write(sc, RT3070_EFUSE_CTRL, tmp); 1204 for (ntries = 0; ntries < 100; ntries++) { 1205 if ((error = run_read(sc, RT3070_EFUSE_CTRL, &tmp)) != 0) 1206 return (error); 1207 if (!(tmp & RT3070_EFSROM_KICK)) 1208 break; 1209 run_delay(sc, 2); 1210 } 1211 if (ntries == 100) 1212 return (ETIMEDOUT); 1213 1214 if ((tmp & RT3070_EFUSE_AOUT_MASK) == RT3070_EFUSE_AOUT_MASK) { 1215 *val = 0xffff; /* address not found */ 1216 return (0); 1217 } 1218 /* determine to which 32-bit register our 16-bit word belongs */ 1219 reg = RT3070_EFUSE_DATA3 - (addr & 0xc); 1220 if ((error = run_read(sc, reg, &tmp)) != 0) 1221 return (error); 1222 1223 *val = (addr & 2) ? tmp >> 16 : tmp & 0xffff; 1224 return (0); 1225} 1226 1227static int 1228run_eeprom_read_2(struct run_softc *sc, uint16_t addr, uint16_t *val) 1229{ 1230 usb_device_request_t req; 1231 uint16_t tmp; 1232 int error; 1233 1234 addr *= 2; 1235 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1236 req.bRequest = RT2870_EEPROM_READ; 1237 USETW(req.wValue, 0); 1238 USETW(req.wIndex, addr); 1239 USETW(req.wLength, sizeof tmp); 1240 1241 error = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, &tmp); 1242 if (error == 0) 1243 *val = le16toh(tmp); 1244 else 1245 *val = 0xffff; 1246 return (error); 1247} 1248 1249static __inline int 1250run_srom_read(struct run_softc *sc, uint16_t addr, uint16_t *val) 1251{ 1252 /* either eFUSE ROM or EEPROM */ 1253 return sc->sc_srom_read(sc, addr, val); 1254} 1255 1256static int 1257run_rt2870_rf_write(struct run_softc *sc, uint8_t reg, uint32_t val) 1258{ 1259 uint32_t tmp; 1260 int error, ntries; 1261 1262 for (ntries = 0; ntries < 10; ntries++) { 1263 if ((error = run_read(sc, RT2860_RF_CSR_CFG0, &tmp)) != 0) 1264 return (error); 1265 if (!(tmp & RT2860_RF_REG_CTRL)) 1266 break; 1267 } 1268 if (ntries == 10) 1269 return (ETIMEDOUT); 1270 1271 /* RF registers are 24-bit on the RT2860 */ 1272 tmp = RT2860_RF_REG_CTRL | 24 << RT2860_RF_REG_WIDTH_SHIFT | 1273 (val & 0x3fffff) << 2 | (reg & 3); 1274 return (run_write(sc, RT2860_RF_CSR_CFG0, tmp)); 1275} 1276 1277static int 1278run_rt3070_rf_read(struct run_softc *sc, uint8_t reg, uint8_t *val) 1279{ 1280 uint32_t tmp; 1281 int error, ntries; 1282 1283 for (ntries = 0; ntries < 100; ntries++) { 1284 if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) 1285 return (error); 1286 if (!(tmp & RT3070_RF_KICK)) 1287 break; 1288 } 1289 if (ntries == 100) 1290 return (ETIMEDOUT); 1291 1292 tmp = RT3070_RF_KICK | reg << 8; 1293 if ((error = run_write(sc, RT3070_RF_CSR_CFG, tmp)) != 0) 1294 return (error); 1295 1296 for (ntries = 0; ntries < 100; ntries++) { 1297 if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) 1298 return (error); 1299 if (!(tmp & RT3070_RF_KICK)) 1300 break; 1301 } 1302 if (ntries == 100) 1303 return (ETIMEDOUT); 1304 1305 *val = tmp & 0xff; 1306 return (0); 1307} 1308 1309static int 1310run_rt3070_rf_write(struct run_softc *sc, uint8_t reg, uint8_t val) 1311{ 1312 uint32_t tmp; 1313 int error, ntries; 1314 1315 for (ntries = 0; ntries < 10; ntries++) { 1316 if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) 1317 return (error); 1318 if (!(tmp & RT3070_RF_KICK)) 1319 break; 1320 } 1321 if (ntries == 10) 1322 return (ETIMEDOUT); 1323 1324 tmp = RT3070_RF_WRITE | RT3070_RF_KICK | reg << 8 | val; 1325 return (run_write(sc, RT3070_RF_CSR_CFG, tmp)); 1326} 1327 1328static int 1329run_bbp_read(struct run_softc *sc, uint8_t reg, uint8_t *val) 1330{ 1331 uint32_t tmp; 1332 int ntries, error; 1333 1334 for (ntries = 0; ntries < 10; ntries++) { 1335 if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) 1336 return (error); 1337 if (!(tmp & RT2860_BBP_CSR_KICK)) 1338 break; 1339 } 1340 if (ntries == 10) 1341 return (ETIMEDOUT); 1342 1343 tmp = RT2860_BBP_CSR_READ | RT2860_BBP_CSR_KICK | reg << 8; 1344 if ((error = run_write(sc, RT2860_BBP_CSR_CFG, tmp)) != 0) 1345 return (error); 1346 1347 for (ntries = 0; ntries < 10; ntries++) { 1348 if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) 1349 return (error); 1350 if (!(tmp & RT2860_BBP_CSR_KICK)) 1351 break; 1352 } 1353 if (ntries == 10) 1354 return (ETIMEDOUT); 1355 1356 *val = tmp & 0xff; 1357 return (0); 1358} 1359 1360static int 1361run_bbp_write(struct run_softc *sc, uint8_t reg, uint8_t val) 1362{ 1363 uint32_t tmp; 1364 int ntries, error; 1365 1366 for (ntries = 0; ntries < 10; ntries++) { 1367 if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) 1368 return (error); 1369 if (!(tmp & RT2860_BBP_CSR_KICK)) 1370 break; 1371 } 1372 if (ntries == 10) 1373 return (ETIMEDOUT); 1374 1375 tmp = RT2860_BBP_CSR_KICK | reg << 8 | val; 1376 return (run_write(sc, RT2860_BBP_CSR_CFG, tmp)); 1377} 1378 1379/* 1380 * Send a command to the 8051 microcontroller unit. 1381 */ 1382static int 1383run_mcu_cmd(struct run_softc *sc, uint8_t cmd, uint16_t arg) 1384{ 1385 uint32_t tmp; 1386 int error, ntries; 1387 1388 for (ntries = 0; ntries < 100; ntries++) { 1389 if ((error = run_read(sc, RT2860_H2M_MAILBOX, &tmp)) != 0) 1390 return error; 1391 if (!(tmp & RT2860_H2M_BUSY)) 1392 break; 1393 } 1394 if (ntries == 100) 1395 return ETIMEDOUT; 1396 1397 tmp = RT2860_H2M_BUSY | RT2860_TOKEN_NO_INTR << 16 | arg; 1398 if ((error = run_write(sc, RT2860_H2M_MAILBOX, tmp)) == 0) 1399 error = run_write(sc, RT2860_HOST_CMD, cmd); 1400 return (error); 1401} 1402 1403/* 1404 * Add `delta' (signed) to each 4-bit sub-word of a 32-bit word. 1405 * Used to adjust per-rate Tx power registers. 1406 */ 1407static __inline uint32_t 1408b4inc(uint32_t b32, int8_t delta) 1409{ 1410 int8_t i, b4; 1411 1412 for (i = 0; i < 8; i++) { 1413 b4 = b32 & 0xf; 1414 b4 += delta; 1415 if (b4 < 0) 1416 b4 = 0; 1417 else if (b4 > 0xf) 1418 b4 = 0xf; 1419 b32 = b32 >> 4 | b4 << 28; 1420 } 1421 return (b32); 1422} 1423 1424static const char * 1425run_get_rf(int rev) 1426{ 1427 switch (rev) { 1428 case RT2860_RF_2820: return "RT2820"; 1429 case RT2860_RF_2850: return "RT2850"; 1430 case RT2860_RF_2720: return "RT2720"; 1431 case RT2860_RF_2750: return "RT2750"; 1432 case RT3070_RF_3020: return "RT3020"; 1433 case RT3070_RF_2020: return "RT2020"; 1434 case RT3070_RF_3021: return "RT3021"; 1435 case RT3070_RF_3022: return "RT3022"; 1436 case RT3070_RF_3052: return "RT3052"; 1437 } 1438 return ("unknown"); 1439} 1440 1441int 1442run_read_eeprom(struct run_softc *sc) 1443{ 1444 int8_t delta_2ghz, delta_5ghz; 1445 uint32_t tmp; 1446 uint16_t val; 1447 int ridx, ant, i; 1448 1449 /* check whether the ROM is eFUSE ROM or EEPROM */ 1450 sc->sc_srom_read = run_eeprom_read_2; 1451 if (sc->mac_ver >= 0x3070) { 1452 run_read(sc, RT3070_EFUSE_CTRL, &tmp); 1453 DPRINTF("EFUSE_CTRL=0x%08x\n", tmp); 1454 if (tmp & RT3070_SEL_EFUSE) 1455 sc->sc_srom_read = run_efuse_read_2; 1456 } 1457 1458 /* read ROM version */ 1459 run_srom_read(sc, RT2860_EEPROM_VERSION, &val); 1460 DPRINTF("EEPROM rev=%d, FAE=%d\n", val & 0xff, val >> 8); 1461 1462 /* read MAC address */ 1463 run_srom_read(sc, RT2860_EEPROM_MAC01, &val); 1464 sc->sc_bssid[0] = val & 0xff; 1465 sc->sc_bssid[1] = val >> 8; 1466 run_srom_read(sc, RT2860_EEPROM_MAC23, &val); 1467 sc->sc_bssid[2] = val & 0xff; 1468 sc->sc_bssid[3] = val >> 8; 1469 run_srom_read(sc, RT2860_EEPROM_MAC45, &val); 1470 sc->sc_bssid[4] = val & 0xff; 1471 sc->sc_bssid[5] = val >> 8; 1472 1473 /* read vender BBP settings */ 1474 for (i = 0; i < 10; i++) { 1475 run_srom_read(sc, RT2860_EEPROM_BBP_BASE + i, &val); 1476 sc->bbp[i].val = val & 0xff; 1477 sc->bbp[i].reg = val >> 8; 1478 DPRINTF("BBP%d=0x%02x\n", sc->bbp[i].reg, sc->bbp[i].val); 1479 } 1480 if (sc->mac_ver >= 0x3071) { 1481 /* read vendor RF settings */ 1482 for (i = 0; i < 10; i++) { 1483 run_srom_read(sc, RT3071_EEPROM_RF_BASE + i, &val); 1484 sc->rf[i].val = val & 0xff; 1485 sc->rf[i].reg = val >> 8; 1486 DPRINTF("RF%d=0x%02x\n", sc->rf[i].reg, 1487 sc->rf[i].val); 1488 } 1489 } 1490 1491 /* read RF frequency offset from EEPROM */ 1492 run_srom_read(sc, RT2860_EEPROM_FREQ_LEDS, &val); 1493 sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0; 1494 DPRINTF("EEPROM freq offset %d\n", sc->freq & 0xff); 1495 1496 if (val >> 8 != 0xff) { 1497 /* read LEDs operating mode */ 1498 sc->leds = val >> 8; 1499 run_srom_read(sc, RT2860_EEPROM_LED1, &sc->led[0]); 1500 run_srom_read(sc, RT2860_EEPROM_LED2, &sc->led[1]); 1501 run_srom_read(sc, RT2860_EEPROM_LED3, &sc->led[2]); 1502 } else { 1503 /* broken EEPROM, use default settings */ 1504 sc->leds = 0x01; 1505 sc->led[0] = 0x5555; 1506 sc->led[1] = 0x2221; 1507 sc->led[2] = 0x5627; /* differs from RT2860 */ 1508 } 1509 DPRINTF("EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n", 1510 sc->leds, sc->led[0], sc->led[1], sc->led[2]); 1511 1512 /* read RF information */ 1513 run_srom_read(sc, RT2860_EEPROM_ANTENNA, &val); 1514 if (val == 0xffff) { 1515 DPRINTF("invalid EEPROM antenna info, using default\n"); 1516 if (sc->mac_ver == 0x3572) { 1517 /* default to RF3052 2T2R */ 1518 sc->rf_rev = RT3070_RF_3052; 1519 sc->ntxchains = 2; 1520 sc->nrxchains = 2; 1521 } else if (sc->mac_ver >= 0x3070) { 1522 /* default to RF3020 1T1R */ 1523 sc->rf_rev = RT3070_RF_3020; 1524 sc->ntxchains = 1; 1525 sc->nrxchains = 1; 1526 } else { 1527 /* default to RF2820 1T2R */ 1528 sc->rf_rev = RT2860_RF_2820; 1529 sc->ntxchains = 1; 1530 sc->nrxchains = 2; 1531 } 1532 } else { 1533 sc->rf_rev = (val >> 8) & 0xf; 1534 sc->ntxchains = (val >> 4) & 0xf; 1535 sc->nrxchains = val & 0xf; 1536 } 1537 DPRINTF("EEPROM RF rev=0x%02x chains=%dT%dR\n", 1538 sc->rf_rev, sc->ntxchains, sc->nrxchains); 1539 1540 /* check if RF supports automatic Tx access gain control */ 1541 run_srom_read(sc, RT2860_EEPROM_CONFIG, &val); 1542 DPRINTF("EEPROM CFG 0x%04x\n", val); 1543 /* check if driver should patch the DAC issue */ 1544 if ((val >> 8) != 0xff) 1545 sc->patch_dac = (val >> 15) & 1; 1546 if ((val & 0xff) != 0xff) { 1547 sc->ext_5ghz_lna = (val >> 3) & 1; 1548 sc->ext_2ghz_lna = (val >> 2) & 1; 1549 /* check if RF supports automatic Tx access gain control */ 1550 sc->calib_2ghz = sc->calib_5ghz = (val >> 1) & 1; 1551 /* check if we have a hardware radio switch */ 1552 sc->rfswitch = val & 1; 1553 } 1554 1555 /* read power settings for 2GHz channels */ 1556 for (i = 0; i < 14; i += 2) { 1557 run_srom_read(sc, RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2, &val); 1558 sc->txpow1[i + 0] = (int8_t)(val & 0xff); 1559 sc->txpow1[i + 1] = (int8_t)(val >> 8); 1560 1561 run_srom_read(sc, RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2, &val); 1562 sc->txpow2[i + 0] = (int8_t)(val & 0xff); 1563 sc->txpow2[i + 1] = (int8_t)(val >> 8); 1564 } 1565 /* fix broken Tx power entries */ 1566 for (i = 0; i < 14; i++) { 1567 if (sc->txpow1[i] < 0 || sc->txpow1[i] > 31) 1568 sc->txpow1[i] = 5; 1569 if (sc->txpow2[i] < 0 || sc->txpow2[i] > 31) 1570 sc->txpow2[i] = 5; 1571 DPRINTF("chan %d: power1=%d, power2=%d\n", 1572 rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]); 1573 } 1574 /* read power settings for 5GHz channels */ 1575 for (i = 0; i < 40; i += 2) { 1576 run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2, &val); 1577 sc->txpow1[i + 14] = (int8_t)(val & 0xff); 1578 sc->txpow1[i + 15] = (int8_t)(val >> 8); 1579 1580 run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2, &val); 1581 sc->txpow2[i + 14] = (int8_t)(val & 0xff); 1582 sc->txpow2[i + 15] = (int8_t)(val >> 8); 1583 } 1584 /* fix broken Tx power entries */ 1585 for (i = 0; i < 40; i++) { 1586 if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15) 1587 sc->txpow1[14 + i] = 5; 1588 if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15) 1589 sc->txpow2[14 + i] = 5; 1590 DPRINTF("chan %d: power1=%d, power2=%d\n", 1591 rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i], 1592 sc->txpow2[14 + i]); 1593 } 1594 1595 /* read Tx power compensation for each Tx rate */ 1596 run_srom_read(sc, RT2860_EEPROM_DELTAPWR, &val); 1597 delta_2ghz = delta_5ghz = 0; 1598 if ((val & 0xff) != 0xff && (val & 0x80)) { 1599 delta_2ghz = val & 0xf; 1600 if (!(val & 0x40)) /* negative number */ 1601 delta_2ghz = -delta_2ghz; 1602 } 1603 val >>= 8; 1604 if ((val & 0xff) != 0xff && (val & 0x80)) { 1605 delta_5ghz = val & 0xf; 1606 if (!(val & 0x40)) /* negative number */ 1607 delta_5ghz = -delta_5ghz; 1608 } 1609 DPRINTF("power compensation=%d (2GHz), %d (5GHz)\n", 1610 delta_2ghz, delta_5ghz); 1611 1612 for (ridx = 0; ridx < 5; ridx++) { 1613 uint32_t reg; 1614 1615 run_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2, &val); 1616 reg = val; 1617 run_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2 + 1, &val); 1618 reg |= (uint32_t)val << 16; 1619 1620 sc->txpow20mhz[ridx] = reg; 1621 sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz); 1622 sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz); 1623 1624 DPRINTF("ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, " 1625 "40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx], 1626 sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx]); 1627 } 1628 1629 /* read RSSI offsets and LNA gains from EEPROM */ 1630 run_srom_read(sc, RT2860_EEPROM_RSSI1_2GHZ, &val); 1631 sc->rssi_2ghz[0] = val & 0xff; /* Ant A */ 1632 sc->rssi_2ghz[1] = val >> 8; /* Ant B */ 1633 run_srom_read(sc, RT2860_EEPROM_RSSI2_2GHZ, &val); 1634 if (sc->mac_ver >= 0x3070) { 1635 /* 1636 * On RT3070 chips (limited to 2 Rx chains), this ROM 1637 * field contains the Tx mixer gain for the 2GHz band. 1638 */ 1639 if ((val & 0xff) != 0xff) 1640 sc->txmixgain_2ghz = val & 0x7; 1641 DPRINTF("tx mixer gain=%u (2GHz)\n", sc->txmixgain_2ghz); 1642 } else 1643 sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ 1644 sc->lna[2] = val >> 8; /* channel group 2 */ 1645 1646 run_srom_read(sc, RT2860_EEPROM_RSSI1_5GHZ, &val); 1647 sc->rssi_5ghz[0] = val & 0xff; /* Ant A */ 1648 sc->rssi_5ghz[1] = val >> 8; /* Ant B */ 1649 run_srom_read(sc, RT2860_EEPROM_RSSI2_5GHZ, &val); 1650 if (sc->mac_ver == 0x3572) { 1651 /* 1652 * On RT3572 chips (limited to 2 Rx chains), this ROM 1653 * field contains the Tx mixer gain for the 5GHz band. 1654 */ 1655 if ((val & 0xff) != 0xff) 1656 sc->txmixgain_5ghz = val & 0x7; 1657 DPRINTF("tx mixer gain=%u (5GHz)\n", sc->txmixgain_5ghz); 1658 } else 1659 sc->rssi_5ghz[2] = val & 0xff; /* Ant C */ 1660 sc->lna[3] = val >> 8; /* channel group 3 */ 1661 1662 run_srom_read(sc, RT2860_EEPROM_LNA, &val); 1663 sc->lna[0] = val & 0xff; /* channel group 0 */ 1664 sc->lna[1] = val >> 8; /* channel group 1 */ 1665 1666 /* fix broken 5GHz LNA entries */ 1667 if (sc->lna[2] == 0 || sc->lna[2] == 0xff) { 1668 DPRINTF("invalid LNA for channel group %d\n", 2); 1669 sc->lna[2] = sc->lna[1]; 1670 } 1671 if (sc->lna[3] == 0 || sc->lna[3] == 0xff) { 1672 DPRINTF("invalid LNA for channel group %d\n", 3); 1673 sc->lna[3] = sc->lna[1]; 1674 } 1675 1676 /* fix broken RSSI offset entries */ 1677 for (ant = 0; ant < 3; ant++) { 1678 if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) { 1679 DPRINTF("invalid RSSI%d offset: %d (2GHz)\n", 1680 ant + 1, sc->rssi_2ghz[ant]); 1681 sc->rssi_2ghz[ant] = 0; 1682 } 1683 if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) { 1684 DPRINTF("invalid RSSI%d offset: %d (5GHz)\n", 1685 ant + 1, sc->rssi_5ghz[ant]); 1686 sc->rssi_5ghz[ant] = 0; 1687 } 1688 } 1689 return (0); 1690} 1691 1692static struct ieee80211_node * 1693run_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) 1694{ 1695 return malloc(sizeof (struct run_node), M_DEVBUF, M_NOWAIT | M_ZERO); 1696} 1697 1698static int 1699run_media_change(struct ifnet *ifp) 1700{ 1701 struct ieee80211vap *vap = ifp->if_softc; 1702 struct ieee80211com *ic = vap->iv_ic; 1703 const struct ieee80211_txparam *tp; 1704 struct run_softc *sc = ic->ic_ifp->if_softc; 1705 uint8_t rate, ridx; 1706 int error; 1707 1708 RUN_LOCK(sc); 1709 1710 error = ieee80211_media_change(ifp); 1711 if (error != ENETRESET) { 1712 RUN_UNLOCK(sc); 1713 return (error); 1714 } 1715 1716 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; 1717 if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1718 struct ieee80211_node *ni; 1719 struct run_node *rn; 1720 1721 rate = ic->ic_sup_rates[ic->ic_curmode]. 1722 rs_rates[tp->ucastrate] & IEEE80211_RATE_VAL; 1723 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 1724 if (rt2860_rates[ridx].rate == rate) 1725 break; 1726 ni = ieee80211_ref_node(vap->iv_bss); 1727 rn = (struct run_node *)ni; 1728 rn->fix_ridx = ridx; 1729 DPRINTF("rate=%d, fix_ridx=%d\n", rate, rn->fix_ridx); 1730 ieee80211_free_node(ni); 1731 } 1732 1733#if 0 1734 if ((ifp->if_flags & IFF_UP) && 1735 (ifp->if_drv_flags & IFF_DRV_RUNNING)){ 1736 run_init_locked(sc); 1737 } 1738#endif 1739 1740 RUN_UNLOCK(sc); 1741 1742 return (0); 1743} 1744 1745static int 1746run_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 1747{ 1748 const struct ieee80211_txparam *tp; 1749 struct ieee80211com *ic = vap->iv_ic; 1750 struct run_softc *sc = ic->ic_ifp->if_softc; 1751 struct run_vap *rvp = RUN_VAP(vap); 1752 enum ieee80211_state ostate; 1753 uint32_t sta[3]; 1754 uint32_t tmp; 1755 uint8_t ratectl; 1756 uint8_t restart_ratectl = 0; 1757 uint8_t bid = 1 << rvp->rvp_id; 1758 1759 ostate = vap->iv_state; 1760 DPRINTF("%s -> %s\n", 1761 ieee80211_state_name[ostate], 1762 ieee80211_state_name[nstate]); 1763 1764 IEEE80211_UNLOCK(ic); 1765 RUN_LOCK(sc); 1766 1767 ratectl = sc->ratectl_run; /* remember current state */ 1768 sc->ratectl_run = RUN_RATECTL_OFF; 1769 usb_callout_stop(&sc->ratectl_ch); 1770 1771 if (ostate == IEEE80211_S_RUN) { 1772 /* turn link LED off */ 1773 run_set_leds(sc, RT2860_LED_RADIO); 1774 } 1775 1776 switch (nstate) { 1777 case IEEE80211_S_INIT: 1778 restart_ratectl = 1; 1779 1780 if (ostate != IEEE80211_S_RUN) 1781 break; 1782 1783 ratectl &= ~bid; 1784 sc->runbmap &= ~bid; 1785 1786 /* abort TSF synchronization if there is no vap running */ 1787 if (--sc->running == 0) { 1788 run_read(sc, RT2860_BCN_TIME_CFG, &tmp); 1789 run_write(sc, RT2860_BCN_TIME_CFG, 1790 tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | 1791 RT2860_TBTT_TIMER_EN)); 1792 } 1793 break; 1794 1795 case IEEE80211_S_RUN: 1796 if (!(sc->runbmap & bid)) { 1797 if(sc->running++) 1798 restart_ratectl = 1; 1799 sc->runbmap |= bid; 1800 } 1801 1802 m_freem(rvp->beacon_mbuf); 1803 rvp->beacon_mbuf = NULL; 1804 1805 switch (vap->iv_opmode) { 1806 case IEEE80211_M_HOSTAP: 1807 case IEEE80211_M_MBSS: 1808 sc->ap_running |= bid; 1809 ic->ic_opmode = vap->iv_opmode; 1810 run_update_beacon_cb(vap); 1811 break; 1812 case IEEE80211_M_IBSS: 1813 sc->adhoc_running |= bid; 1814 if (!sc->ap_running) 1815 ic->ic_opmode = vap->iv_opmode; 1816 run_update_beacon_cb(vap); 1817 break; 1818 case IEEE80211_M_STA: 1819 sc->sta_running |= bid; 1820 if (!sc->ap_running && !sc->adhoc_running) 1821 ic->ic_opmode = vap->iv_opmode; 1822 1823 /* read statistic counters (clear on read) */ 1824 run_read_region_1(sc, RT2860_TX_STA_CNT0, 1825 (uint8_t *)sta, sizeof sta); 1826 1827 break; 1828 default: 1829 ic->ic_opmode = vap->iv_opmode; 1830 break; 1831 } 1832 1833 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 1834 struct ieee80211_node *ni; 1835 1836 if (ic->ic_bsschan == IEEE80211_CHAN_ANYC) { 1837 RUN_UNLOCK(sc); 1838 IEEE80211_LOCK(ic); 1839 return (-1); 1840 } 1841 run_updateslot(ic->ic_ifp); 1842 run_enable_mrr(sc); 1843 run_set_txpreamble(sc); 1844 run_set_basicrates(sc); 1845 ni = ieee80211_ref_node(vap->iv_bss); 1846 IEEE80211_ADDR_COPY(sc->sc_bssid, ni->ni_bssid); 1847 run_set_bssid(sc, ni->ni_bssid); 1848 ieee80211_free_node(ni); 1849 run_enable_tsf_sync(sc); 1850 1851 /* enable automatic rate adaptation */ 1852 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; 1853 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) 1854 ratectl |= bid; 1855 } 1856 1857 /* turn link LED on */ 1858 run_set_leds(sc, RT2860_LED_RADIO | 1859 (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan) ? 1860 RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ)); 1861 1862 break; 1863 default: 1864 DPRINTFN(6, "undefined case\n"); 1865 break; 1866 } 1867 1868 /* restart amrr for running VAPs */ 1869 if ((sc->ratectl_run = ratectl) && restart_ratectl) 1870 usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); 1871 1872 RUN_UNLOCK(sc); 1873 IEEE80211_LOCK(ic); 1874 1875 return(rvp->newstate(vap, nstate, arg)); 1876} 1877 1878/* ARGSUSED */ 1879static void 1880run_wme_update_cb(void *arg) 1881{ 1882 struct ieee80211com *ic = arg; 1883 struct run_softc *sc = ic->ic_ifp->if_softc; 1884 struct ieee80211_wme_state *wmesp = &ic->ic_wme; 1885 int aci, error = 0; 1886 1887 RUN_LOCK_ASSERT(sc, MA_OWNED); 1888 1889 /* update MAC TX configuration registers */ 1890 for (aci = 0; aci < WME_NUM_AC; aci++) { 1891 error = run_write(sc, RT2860_EDCA_AC_CFG(aci), 1892 wmesp->wme_params[aci].wmep_logcwmax << 16 | 1893 wmesp->wme_params[aci].wmep_logcwmin << 12 | 1894 wmesp->wme_params[aci].wmep_aifsn << 8 | 1895 wmesp->wme_params[aci].wmep_txopLimit); 1896 if (error) goto err; 1897 } 1898 1899 /* update SCH/DMA registers too */ 1900 error = run_write(sc, RT2860_WMM_AIFSN_CFG, 1901 wmesp->wme_params[WME_AC_VO].wmep_aifsn << 12 | 1902 wmesp->wme_params[WME_AC_VI].wmep_aifsn << 8 | 1903 wmesp->wme_params[WME_AC_BK].wmep_aifsn << 4 | 1904 wmesp->wme_params[WME_AC_BE].wmep_aifsn); 1905 if (error) goto err; 1906 error = run_write(sc, RT2860_WMM_CWMIN_CFG, 1907 wmesp->wme_params[WME_AC_VO].wmep_logcwmin << 12 | 1908 wmesp->wme_params[WME_AC_VI].wmep_logcwmin << 8 | 1909 wmesp->wme_params[WME_AC_BK].wmep_logcwmin << 4 | 1910 wmesp->wme_params[WME_AC_BE].wmep_logcwmin); 1911 if (error) goto err; 1912 error = run_write(sc, RT2860_WMM_CWMAX_CFG, 1913 wmesp->wme_params[WME_AC_VO].wmep_logcwmax << 12 | 1914 wmesp->wme_params[WME_AC_VI].wmep_logcwmax << 8 | 1915 wmesp->wme_params[WME_AC_BK].wmep_logcwmax << 4 | 1916 wmesp->wme_params[WME_AC_BE].wmep_logcwmax); 1917 if (error) goto err; 1918 error = run_write(sc, RT2860_WMM_TXOP0_CFG, 1919 wmesp->wme_params[WME_AC_BK].wmep_txopLimit << 16 | 1920 wmesp->wme_params[WME_AC_BE].wmep_txopLimit); 1921 if (error) goto err; 1922 error = run_write(sc, RT2860_WMM_TXOP1_CFG, 1923 wmesp->wme_params[WME_AC_VO].wmep_txopLimit << 16 | 1924 wmesp->wme_params[WME_AC_VI].wmep_txopLimit); 1925 1926err: 1927 if (error) 1928 DPRINTF("WME update failed\n"); 1929 1930 return; 1931} 1932 1933static int 1934run_wme_update(struct ieee80211com *ic) 1935{ 1936 struct run_softc *sc = ic->ic_ifp->if_softc; 1937 1938 /* sometime called wothout lock */ 1939 if (mtx_owned(&ic->ic_comlock.mtx)) { 1940 uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store); 1941 DPRINTF("cmdq_store=%d\n", i); 1942 sc->cmdq[i].func = run_wme_update_cb; 1943 sc->cmdq[i].arg0 = ic; 1944 ieee80211_runtask(ic, &sc->cmdq_task); 1945 return (0); 1946 } 1947 1948 RUN_LOCK(sc); 1949 run_wme_update_cb(ic); 1950 RUN_UNLOCK(sc); 1951 1952 /* return whatever, upper layer desn't care anyway */ 1953 return (0); 1954} 1955 1956static void 1957run_key_update_begin(struct ieee80211vap *vap) 1958{ 1959 /* 1960 * To avoid out-of-order events, both run_key_set() and 1961 * _delete() are deferred and handled by run_cmdq_cb(). 1962 * So, there is nothing we need to do here. 1963 */ 1964} 1965 1966static void 1967run_key_update_end(struct ieee80211vap *vap) 1968{ 1969 /* null */ 1970} 1971 1972static void 1973run_key_set_cb(void *arg) 1974{ 1975 struct run_cmdq *cmdq = arg; 1976 struct ieee80211vap *vap = cmdq->arg1; 1977 struct ieee80211_key *k = cmdq->k; 1978 struct ieee80211com *ic = vap->iv_ic; 1979 struct run_softc *sc = ic->ic_ifp->if_softc; 1980 struct ieee80211_node *ni; 1981 uint32_t attr; 1982 uint16_t base, associd; 1983 uint8_t mode, wcid, iv[8]; 1984 1985 RUN_LOCK_ASSERT(sc, MA_OWNED); 1986 1987 if (vap->iv_opmode == IEEE80211_M_HOSTAP) 1988 ni = ieee80211_find_vap_node(&ic->ic_sta, vap, cmdq->mac); 1989 else 1990 ni = vap->iv_bss; 1991 associd = (ni != NULL) ? ni->ni_associd : 0; 1992 1993 /* map net80211 cipher to RT2860 security mode */ 1994 switch (k->wk_cipher->ic_cipher) { 1995 case IEEE80211_CIPHER_WEP: 1996 if(k->wk_keylen < 8) 1997 mode = RT2860_MODE_WEP40; 1998 else 1999 mode = RT2860_MODE_WEP104; 2000 break; 2001 case IEEE80211_CIPHER_TKIP: 2002 mode = RT2860_MODE_TKIP; 2003 break; 2004 case IEEE80211_CIPHER_AES_CCM: 2005 mode = RT2860_MODE_AES_CCMP; 2006 break; 2007 default: 2008 DPRINTF("undefined case\n"); 2009 return; 2010 } 2011 2012 DPRINTFN(1, "associd=%x, keyix=%d, mode=%x, type=%s, tx=%s, rx=%s\n", 2013 associd, k->wk_keyix, mode, 2014 (k->wk_flags & IEEE80211_KEY_GROUP) ? "group" : "pairwise", 2015 (k->wk_flags & IEEE80211_KEY_XMIT) ? "on" : "off", 2016 (k->wk_flags & IEEE80211_KEY_RECV) ? "on" : "off"); 2017 2018 if (k->wk_flags & IEEE80211_KEY_GROUP) { 2019 wcid = 0; /* NB: update WCID0 for group keys */ 2020 base = RT2860_SKEY(RUN_VAP(vap)->rvp_id, k->wk_keyix); 2021 } else { 2022 wcid = RUN_AID2WCID(associd); 2023 base = RT2860_PKEY(wcid); 2024 } 2025 2026 if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP) { 2027 if(run_write_region_1(sc, base, k->wk_key, 16)) 2028 return; 2029 if(run_write_region_1(sc, base + 16, &k->wk_key[16], 8)) /* wk_txmic */ 2030 return; 2031 if(run_write_region_1(sc, base + 24, &k->wk_key[24], 8)) /* wk_rxmic */ 2032 return; 2033 } else { 2034 /* roundup len to 16-bit: XXX fix write_region_1() instead */ 2035 if(run_write_region_1(sc, base, k->wk_key, (k->wk_keylen + 1) & ~1)) 2036 return; 2037 } 2038 2039 if (!(k->wk_flags & IEEE80211_KEY_GROUP) || 2040 (k->wk_flags & (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV))) { 2041 /* set initial packet number in IV+EIV */ 2042 if (k->wk_cipher == IEEE80211_CIPHER_WEP) { 2043 memset(iv, 0, sizeof iv); 2044 iv[3] = vap->iv_def_txkey << 6; 2045 } else { 2046 if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP) { 2047 iv[0] = k->wk_keytsc >> 8; 2048 iv[1] = (iv[0] | 0x20) & 0x7f; 2049 iv[2] = k->wk_keytsc; 2050 } else /* CCMP */ { 2051 iv[0] = k->wk_keytsc; 2052 iv[1] = k->wk_keytsc >> 8; 2053 iv[2] = 0; 2054 } 2055 iv[3] = k->wk_keyix << 6 | IEEE80211_WEP_EXTIV; 2056 iv[4] = k->wk_keytsc >> 16; 2057 iv[5] = k->wk_keytsc >> 24; 2058 iv[6] = k->wk_keytsc >> 32; 2059 iv[7] = k->wk_keytsc >> 40; 2060 } 2061 if (run_write_region_1(sc, RT2860_IVEIV(wcid), iv, 8)) 2062 return; 2063 } 2064 2065 if (k->wk_flags & IEEE80211_KEY_GROUP) { 2066 /* install group key */ 2067 if (run_read(sc, RT2860_SKEY_MODE_0_7, &attr)) 2068 return; 2069 attr &= ~(0xf << (k->wk_keyix * 4)); 2070 attr |= mode << (k->wk_keyix * 4); 2071 if (run_write(sc, RT2860_SKEY_MODE_0_7, attr)) 2072 return; 2073 } else { 2074 /* install pairwise key */ 2075 if (run_read(sc, RT2860_WCID_ATTR(wcid), &attr)) 2076 return; 2077 attr = (attr & ~0xf) | (mode << 1) | RT2860_RX_PKEY_EN; 2078 if (run_write(sc, RT2860_WCID_ATTR(wcid), attr)) 2079 return; 2080 } 2081 2082 /* TODO create a pass-thru key entry? */ 2083 2084 /* need wcid to delete the right key later */ 2085 k->wk_pad = wcid; 2086} 2087 2088/* 2089 * Don't have to be deferred, but in order to keep order of 2090 * execution, i.e. with run_key_delete(), defer this and let 2091 * run_cmdq_cb() maintain the order. 2092 * 2093 * return 0 on error 2094 */ 2095static int 2096run_key_set(struct ieee80211vap *vap, struct ieee80211_key *k, 2097 const uint8_t mac[IEEE80211_ADDR_LEN]) 2098{ 2099 struct ieee80211com *ic = vap->iv_ic; 2100 struct run_softc *sc = ic->ic_ifp->if_softc; 2101 uint32_t i; 2102 2103 i = RUN_CMDQ_GET(&sc->cmdq_store); 2104 DPRINTF("cmdq_store=%d\n", i); 2105 sc->cmdq[i].func = run_key_set_cb; 2106 sc->cmdq[i].arg0 = NULL; 2107 sc->cmdq[i].arg1 = vap; 2108 sc->cmdq[i].k = k; 2109 IEEE80211_ADDR_COPY(sc->cmdq[i].mac, mac); 2110 ieee80211_runtask(ic, &sc->cmdq_task); 2111 2112 /* 2113 * To make sure key will be set when hostapd 2114 * calls iv_key_set() before if_init(). 2115 */ 2116 if (vap->iv_opmode == IEEE80211_M_HOSTAP) { 2117 RUN_LOCK(sc); 2118 sc->cmdq_key_set = RUN_CMDQ_GO; 2119 RUN_UNLOCK(sc); 2120 } 2121 2122 return (1); 2123} 2124 2125/* 2126 * If wlan is destroyed without being brought down i.e. without 2127 * wlan down or wpa_cli terminate, this function is called after 2128 * vap is gone. Don't refer it. 2129 */ 2130static void 2131run_key_delete_cb(void *arg) 2132{ 2133 struct run_cmdq *cmdq = arg; 2134 struct run_softc *sc = cmdq->arg1; 2135 struct ieee80211_key *k = &cmdq->key; 2136 uint32_t attr; 2137 uint8_t wcid; 2138 2139 RUN_LOCK_ASSERT(sc, MA_OWNED); 2140 2141 if (k->wk_flags & IEEE80211_KEY_GROUP) { 2142 /* remove group key */ 2143 DPRINTF("removing group key\n"); 2144 run_read(sc, RT2860_SKEY_MODE_0_7, &attr); 2145 attr &= ~(0xf << (k->wk_keyix * 4)); 2146 run_write(sc, RT2860_SKEY_MODE_0_7, attr); 2147 } else { 2148 /* remove pairwise key */ 2149 DPRINTF("removing key for wcid %x\n", k->wk_pad); 2150 /* matching wcid was written to wk_pad in run_key_set() */ 2151 wcid = k->wk_pad; 2152 run_read(sc, RT2860_WCID_ATTR(wcid), &attr); 2153 attr &= ~0xf; 2154 run_write(sc, RT2860_WCID_ATTR(wcid), attr); 2155 run_set_region_4(sc, RT2860_WCID_ENTRY(wcid), 0, 8); 2156 } 2157 2158 k->wk_pad = 0; 2159} 2160 2161/* 2162 * return 0 on error 2163 */ 2164static int 2165run_key_delete(struct ieee80211vap *vap, struct ieee80211_key *k) 2166{ 2167 struct ieee80211com *ic = vap->iv_ic; 2168 struct run_softc *sc = ic->ic_ifp->if_softc; 2169 struct ieee80211_key *k0; 2170 uint32_t i; 2171 2172 /* 2173 * When called back, key might be gone. So, make a copy 2174 * of some values need to delete keys before deferring. 2175 * But, because of LOR with node lock, cannot use lock here. 2176 * So, use atomic instead. 2177 */ 2178 i = RUN_CMDQ_GET(&sc->cmdq_store); 2179 DPRINTF("cmdq_store=%d\n", i); 2180 sc->cmdq[i].func = run_key_delete_cb; 2181 sc->cmdq[i].arg0 = NULL; 2182 sc->cmdq[i].arg1 = sc; 2183 k0 = &sc->cmdq[i].key; 2184 k0->wk_flags = k->wk_flags; 2185 k0->wk_keyix = k->wk_keyix; 2186 /* matching wcid was written to wk_pad in run_key_set() */ 2187 k0->wk_pad = k->wk_pad; 2188 ieee80211_runtask(ic, &sc->cmdq_task); 2189 return (1); /* return fake success */ 2190 2191} 2192 2193static void 2194run_ratectl_to(void *arg) 2195{ 2196 struct run_softc *sc = arg; 2197 2198 /* do it in a process context, so it can go sleep */ 2199 ieee80211_runtask(sc->sc_ifp->if_l2com, &sc->ratectl_task); 2200 /* next timeout will be rescheduled in the callback task */ 2201} 2202 2203/* ARGSUSED */ 2204static void 2205run_ratectl_cb(void *arg, int pending) 2206{ 2207 struct run_softc *sc = arg; 2208 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 2209 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2210 2211 if (vap == NULL) 2212 return; 2213 2214 if (sc->rvp_cnt <= 1 && vap->iv_opmode == IEEE80211_M_STA) 2215 run_iter_func(sc, vap->iv_bss); 2216 else { 2217 /* 2218 * run_reset_livelock() doesn't do anything with AMRR, 2219 * but Ralink wants us to call it every 1 sec. So, we 2220 * piggyback here rather than creating another callout. 2221 * Livelock may occur only in HOSTAP or IBSS mode 2222 * (when h/w is sending beacons). 2223 */ 2224 RUN_LOCK(sc); 2225 run_reset_livelock(sc); 2226 /* just in case, there are some stats to drain */ 2227 run_drain_fifo(sc); 2228 RUN_UNLOCK(sc); 2229 ieee80211_iterate_nodes(&ic->ic_sta, run_iter_func, sc); 2230 } 2231 2232 if(sc->ratectl_run != RUN_RATECTL_OFF) 2233 usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); 2234} 2235 2236static void 2237run_drain_fifo(void *arg) 2238{ 2239 struct run_softc *sc = arg; 2240 struct ifnet *ifp = sc->sc_ifp; 2241 uint32_t stat; 2242 uint16_t (*wstat)[3]; 2243 uint8_t wcid, mcs, pid; 2244 int8_t retry; 2245 2246 RUN_LOCK_ASSERT(sc, MA_OWNED); 2247 2248 for (;;) { 2249 /* drain Tx status FIFO (maxsize = 16) */ 2250 run_read(sc, RT2860_TX_STAT_FIFO, &stat); 2251 DPRINTFN(4, "tx stat 0x%08x\n", stat); 2252 if (!(stat & RT2860_TXQ_VLD)) 2253 break; 2254 2255 wcid = (stat >> RT2860_TXQ_WCID_SHIFT) & 0xff; 2256 2257 /* if no ACK was requested, no feedback is available */ 2258 if (!(stat & RT2860_TXQ_ACKREQ) || wcid > RT2870_WCID_MAX || 2259 wcid == 0) 2260 continue; 2261 2262 /* 2263 * Even though each stat is Tx-complete-status like format, 2264 * the device can poll stats. Because there is no guarantee 2265 * that the referring node is still around when read the stats. 2266 * So that, if we use ieee80211_ratectl_tx_update(), we will 2267 * have hard time not to refer already freed node. 2268 * 2269 * To eliminate such page faults, we poll stats in softc. 2270 * Then, update the rates later with ieee80211_ratectl_tx_update(). 2271 */ 2272 wstat = &(sc->wcid_stats[wcid]); 2273 (*wstat)[RUN_TXCNT]++; 2274 if (stat & RT2860_TXQ_OK) 2275 (*wstat)[RUN_SUCCESS]++; 2276 else 2277 ifp->if_oerrors++; 2278 /* 2279 * Check if there were retries, ie if the Tx success rate is 2280 * different from the requested rate. Note that it works only 2281 * because we do not allow rate fallback from OFDM to CCK. 2282 */ 2283 mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f; 2284 pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf; 2285 if ((retry = pid -1 - mcs) > 0) { 2286 (*wstat)[RUN_TXCNT] += retry; 2287 (*wstat)[RUN_RETRY] += retry; 2288 } 2289 } 2290 DPRINTFN(3, "count=%d\n", sc->fifo_cnt); 2291 2292 sc->fifo_cnt = 0; 2293} 2294 2295static void 2296run_iter_func(void *arg, struct ieee80211_node *ni) 2297{ 2298 struct run_softc *sc = arg; 2299 struct ieee80211vap *vap = ni->ni_vap; 2300 struct ieee80211com *ic = ni->ni_ic; 2301 struct ifnet *ifp = ic->ic_ifp; 2302 struct run_node *rn = (void *)ni; 2303 union run_stats sta[2]; 2304 uint16_t (*wstat)[3]; 2305 int txcnt, success, retrycnt, error; 2306 2307 RUN_LOCK(sc); 2308 2309 if (sc->rvp_cnt <= 1 && (vap->iv_opmode == IEEE80211_M_IBSS || 2310 vap->iv_opmode == IEEE80211_M_STA)) { 2311 /* read statistic counters (clear on read) and update AMRR state */ 2312 error = run_read_region_1(sc, RT2860_TX_STA_CNT0, (uint8_t *)sta, 2313 sizeof sta); 2314 if (error != 0) 2315 goto fail; 2316 2317 /* count failed TX as errors */ 2318 ifp->if_oerrors += le16toh(sta[0].error.fail); 2319 2320 retrycnt = le16toh(sta[1].tx.retry); 2321 success = le16toh(sta[1].tx.success); 2322 txcnt = retrycnt + success + le16toh(sta[0].error.fail); 2323 2324 DPRINTFN(3, "retrycnt=%d success=%d failcnt=%d\n", 2325 retrycnt, success, le16toh(sta[0].error.fail)); 2326 } else { 2327 wstat = &(sc->wcid_stats[RUN_AID2WCID(ni->ni_associd)]); 2328 2329 if (wstat == &(sc->wcid_stats[0]) || 2330 wstat > &(sc->wcid_stats[RT2870_WCID_MAX])) 2331 goto fail; 2332 2333 txcnt = (*wstat)[RUN_TXCNT]; 2334 success = (*wstat)[RUN_SUCCESS]; 2335 retrycnt = (*wstat)[RUN_RETRY]; 2336 DPRINTFN(3, "retrycnt=%d txcnt=%d success=%d\n", 2337 retrycnt, txcnt, success); 2338 2339 memset(wstat, 0, sizeof(*wstat)); 2340 } 2341 2342 ieee80211_ratectl_tx_update(vap, ni, &txcnt, &success, &retrycnt); 2343 rn->amrr_ridx = ieee80211_ratectl_rate(ni, NULL, 0); 2344 2345fail: 2346 RUN_UNLOCK(sc); 2347 2348 DPRINTFN(3, "ridx=%d\n", rn->amrr_ridx); 2349} 2350 2351static void 2352run_newassoc_cb(void *arg) 2353{ 2354 struct run_cmdq *cmdq = arg; 2355 struct ieee80211_node *ni = cmdq->arg1; 2356 struct run_softc *sc = ni->ni_vap->iv_ic->ic_ifp->if_softc; 2357 uint8_t wcid = cmdq->wcid; 2358 2359 RUN_LOCK_ASSERT(sc, MA_OWNED); 2360 2361 run_write_region_1(sc, RT2860_WCID_ENTRY(wcid), 2362 ni->ni_macaddr, IEEE80211_ADDR_LEN); 2363 2364 memset(&(sc->wcid_stats[wcid]), 0, sizeof(sc->wcid_stats[wcid])); 2365} 2366 2367static void 2368run_newassoc(struct ieee80211_node *ni, int isnew) 2369{ 2370 struct run_node *rn = (void *)ni; 2371 struct ieee80211_rateset *rs = &ni->ni_rates; 2372 struct ieee80211vap *vap = ni->ni_vap; 2373 struct ieee80211com *ic = vap->iv_ic; 2374 struct run_softc *sc = ic->ic_ifp->if_softc; 2375 uint8_t rate; 2376 uint8_t ridx; 2377 uint8_t wcid = RUN_AID2WCID(ni->ni_associd); 2378 int i, j; 2379 2380 if (wcid > RT2870_WCID_MAX) { 2381 device_printf(sc->sc_dev, "wcid=%d out of range\n", wcid); 2382 return; 2383 } 2384 2385 /* only interested in true associations */ 2386 if (isnew && ni->ni_associd != 0) { 2387 2388 /* 2389 * This function could is called though timeout function. 2390 * Need to defer. 2391 */ 2392 uint32_t cnt = RUN_CMDQ_GET(&sc->cmdq_store); 2393 DPRINTF("cmdq_store=%d\n", cnt); 2394 sc->cmdq[cnt].func = run_newassoc_cb; 2395 sc->cmdq[cnt].arg0 = NULL; 2396 sc->cmdq[cnt].arg1 = ni; 2397 sc->cmdq[cnt].wcid = wcid; 2398 ieee80211_runtask(ic, &sc->cmdq_task); 2399 } 2400 2401 DPRINTF("new assoc isnew=%d associd=%x addr=%s\n", 2402 isnew, ni->ni_associd, ether_sprintf(ni->ni_macaddr)); 2403 2404 for (i = 0; i < rs->rs_nrates; i++) { 2405 rate = rs->rs_rates[i] & IEEE80211_RATE_VAL; 2406 /* convert 802.11 rate to hardware rate index */ 2407 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 2408 if (rt2860_rates[ridx].rate == rate) 2409 break; 2410 rn->ridx[i] = ridx; 2411 /* determine rate of control response frames */ 2412 for (j = i; j >= 0; j--) { 2413 if ((rs->rs_rates[j] & IEEE80211_RATE_BASIC) && 2414 rt2860_rates[rn->ridx[i]].phy == 2415 rt2860_rates[rn->ridx[j]].phy) 2416 break; 2417 } 2418 if (j >= 0) { 2419 rn->ctl_ridx[i] = rn->ridx[j]; 2420 } else { 2421 /* no basic rate found, use mandatory one */ 2422 rn->ctl_ridx[i] = rt2860_rates[ridx].ctl_ridx; 2423 } 2424 DPRINTF("rate=0x%02x ridx=%d ctl_ridx=%d\n", 2425 rs->rs_rates[i], rn->ridx[i], rn->ctl_ridx[i]); 2426 } 2427 rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate; 2428 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 2429 if (rt2860_rates[ridx].rate == rate) 2430 break; 2431 rn->mgt_ridx = ridx; 2432 DPRINTF("rate=%d, mgmt_ridx=%d\n", rate, rn->mgt_ridx); 2433 2434 usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); 2435} 2436 2437/* 2438 * Return the Rx chain with the highest RSSI for a given frame. 2439 */ 2440static __inline uint8_t 2441run_maxrssi_chain(struct run_softc *sc, const struct rt2860_rxwi *rxwi) 2442{ 2443 uint8_t rxchain = 0; 2444 2445 if (sc->nrxchains > 1) { 2446 if (rxwi->rssi[1] > rxwi->rssi[rxchain]) 2447 rxchain = 1; 2448 if (sc->nrxchains > 2) 2449 if (rxwi->rssi[2] > rxwi->rssi[rxchain]) 2450 rxchain = 2; 2451 } 2452 return (rxchain); 2453} 2454 2455static void 2456run_rx_frame(struct run_softc *sc, struct mbuf *m, uint32_t dmalen) 2457{ 2458 struct ifnet *ifp = sc->sc_ifp; 2459 struct ieee80211com *ic = ifp->if_l2com; 2460 struct ieee80211_frame *wh; 2461 struct ieee80211_node *ni; 2462 struct rt2870_rxd *rxd; 2463 struct rt2860_rxwi *rxwi; 2464 uint32_t flags; 2465 uint16_t len, phy; 2466 uint8_t ant, rssi; 2467 int8_t nf; 2468 2469 rxwi = mtod(m, struct rt2860_rxwi *); 2470 len = le16toh(rxwi->len) & 0xfff; 2471 if (__predict_false(len > dmalen)) { 2472 m_freem(m); 2473 ifp->if_ierrors++; 2474 DPRINTF("bad RXWI length %u > %u\n", len, dmalen); 2475 return; 2476 } 2477 /* Rx descriptor is located at the end */ 2478 rxd = (struct rt2870_rxd *)(mtod(m, caddr_t) + dmalen); 2479 flags = le32toh(rxd->flags); 2480 2481 if (__predict_false(flags & (RT2860_RX_CRCERR | RT2860_RX_ICVERR))) { 2482 m_freem(m); 2483 ifp->if_ierrors++; 2484 DPRINTF("%s error.\n", (flags & RT2860_RX_CRCERR)?"CRC":"ICV"); 2485 return; 2486 } 2487 2488 m->m_data += sizeof(struct rt2860_rxwi); 2489 m->m_pkthdr.len = m->m_len -= sizeof(struct rt2860_rxwi); 2490 2491 wh = mtod(m, struct ieee80211_frame *); 2492 2493 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 2494 wh->i_fc[1] &= ~IEEE80211_FC1_WEP; 2495 m->m_flags |= M_WEP; 2496 } 2497 2498 if (flags & RT2860_RX_L2PAD) { 2499 DPRINTFN(8, "received RT2860_RX_L2PAD frame\n"); 2500 len += 2; 2501 } 2502 2503 ni = ieee80211_find_rxnode(ic, 2504 mtod(m, struct ieee80211_frame_min *)); 2505 2506 if (__predict_false(flags & RT2860_RX_MICERR)) { 2507 /* report MIC failures to net80211 for TKIP */ 2508 if (ni != NULL) 2509 ieee80211_notify_michael_failure(ni->ni_vap, wh, rxwi->keyidx); 2510 m_freem(m); 2511 ifp->if_ierrors++; 2512 DPRINTF("MIC error. Someone is lying.\n"); 2513 return; 2514 } 2515 2516 ant = run_maxrssi_chain(sc, rxwi); 2517 rssi = rxwi->rssi[ant]; 2518 nf = run_rssi2dbm(sc, rssi, ant); 2519 2520 m->m_pkthdr.rcvif = ifp; 2521 m->m_pkthdr.len = m->m_len = len; 2522 2523 if (ni != NULL) { 2524 (void)ieee80211_input(ni, m, rssi, nf); 2525 ieee80211_free_node(ni); 2526 } else { 2527 (void)ieee80211_input_all(ic, m, rssi, nf); 2528 } 2529 2530 if (__predict_false(ieee80211_radiotap_active(ic))) { 2531 struct run_rx_radiotap_header *tap = &sc->sc_rxtap; 2532 2533 tap->wr_flags = 0; 2534 tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq); 2535 tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags); 2536 tap->wr_antsignal = rssi; 2537 tap->wr_antenna = ant; 2538 tap->wr_dbm_antsignal = run_rssi2dbm(sc, rssi, ant); 2539 tap->wr_rate = 2; /* in case it can't be found below */ 2540 phy = le16toh(rxwi->phy); 2541 switch (phy & RT2860_PHY_MODE) { 2542 case RT2860_PHY_CCK: 2543 switch ((phy & RT2860_PHY_MCS) & ~RT2860_PHY_SHPRE) { 2544 case 0: tap->wr_rate = 2; break; 2545 case 1: tap->wr_rate = 4; break; 2546 case 2: tap->wr_rate = 11; break; 2547 case 3: tap->wr_rate = 22; break; 2548 } 2549 if (phy & RT2860_PHY_SHPRE) 2550 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 2551 break; 2552 case RT2860_PHY_OFDM: 2553 switch (phy & RT2860_PHY_MCS) { 2554 case 0: tap->wr_rate = 12; break; 2555 case 1: tap->wr_rate = 18; break; 2556 case 2: tap->wr_rate = 24; break; 2557 case 3: tap->wr_rate = 36; break; 2558 case 4: tap->wr_rate = 48; break; 2559 case 5: tap->wr_rate = 72; break; 2560 case 6: tap->wr_rate = 96; break; 2561 case 7: tap->wr_rate = 108; break; 2562 } 2563 break; 2564 } 2565 } 2566} 2567 2568static void 2569run_bulk_rx_callback(struct usb_xfer *xfer, usb_error_t error) 2570{ 2571 struct run_softc *sc = usbd_xfer_softc(xfer); 2572 struct ifnet *ifp = sc->sc_ifp; 2573 struct mbuf *m = NULL; 2574 struct mbuf *m0; 2575 uint32_t dmalen; 2576 int xferlen; 2577 2578 usbd_xfer_status(xfer, &xferlen, NULL, NULL, NULL); 2579 2580 switch (USB_GET_STATE(xfer)) { 2581 case USB_ST_TRANSFERRED: 2582 2583 DPRINTFN(15, "rx done, actlen=%d\n", xferlen); 2584 2585 if (xferlen < (int)(sizeof(uint32_t) + 2586 sizeof(struct rt2860_rxwi) + sizeof(struct rt2870_rxd))) { 2587 DPRINTF("xfer too short %d\n", xferlen); 2588 goto tr_setup; 2589 } 2590 2591 m = sc->rx_m; 2592 sc->rx_m = NULL; 2593 2594 /* FALLTHROUGH */ 2595 case USB_ST_SETUP: 2596tr_setup: 2597 if (sc->rx_m == NULL) { 2598 sc->rx_m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, 2599 MJUMPAGESIZE /* xfer can be bigger than MCLBYTES */); 2600 } 2601 if (sc->rx_m == NULL) { 2602 DPRINTF("could not allocate mbuf - idle with stall\n"); 2603 ifp->if_ierrors++; 2604 usbd_xfer_set_stall(xfer); 2605 usbd_xfer_set_frames(xfer, 0); 2606 } else { 2607 /* 2608 * Directly loading a mbuf cluster into DMA to 2609 * save some data copying. This works because 2610 * there is only one cluster. 2611 */ 2612 usbd_xfer_set_frame_data(xfer, 0, 2613 mtod(sc->rx_m, caddr_t), RUN_MAX_RXSZ); 2614 usbd_xfer_set_frames(xfer, 1); 2615 } 2616 usbd_transfer_submit(xfer); 2617 break; 2618 2619 default: /* Error */ 2620 if (error != USB_ERR_CANCELLED) { 2621 /* try to clear stall first */ 2622 usbd_xfer_set_stall(xfer); 2623 2624 if (error == USB_ERR_TIMEOUT) 2625 device_printf(sc->sc_dev, "device timeout\n"); 2626 2627 ifp->if_ierrors++; 2628 2629 goto tr_setup; 2630 } 2631 if (sc->rx_m != NULL) { 2632 m_freem(sc->rx_m); 2633 sc->rx_m = NULL; 2634 } 2635 break; 2636 } 2637 2638 if (m == NULL) 2639 return; 2640 2641 /* inputting all the frames must be last */ 2642 2643 RUN_UNLOCK(sc); 2644 2645 m->m_pkthdr.len = m->m_len = xferlen; 2646 2647 /* HW can aggregate multiple 802.11 frames in a single USB xfer */ 2648 for(;;) { 2649 dmalen = le32toh(*mtod(m, uint32_t *)) & 0xffff; 2650 2651 if ((dmalen >= (uint32_t)-8) || (dmalen == 0) || 2652 ((dmalen & 3) != 0)) { 2653 DPRINTF("bad DMA length %u\n", dmalen); 2654 break; 2655 } 2656 if ((dmalen + 8) > (uint32_t)xferlen) { 2657 DPRINTF("bad DMA length %u > %d\n", 2658 dmalen + 8, xferlen); 2659 break; 2660 } 2661 2662 /* If it is the last one or a single frame, we won't copy. */ 2663 if ((xferlen -= dmalen + 8) <= 8) { 2664 /* trim 32-bit DMA-len header */ 2665 m->m_data += 4; 2666 m->m_pkthdr.len = m->m_len -= 4; 2667 run_rx_frame(sc, m, dmalen); 2668 break; 2669 } 2670 2671 /* copy aggregated frames to another mbuf */ 2672 m0 = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 2673 if (__predict_false(m0 == NULL)) { 2674 DPRINTF("could not allocate mbuf\n"); 2675 ifp->if_ierrors++; 2676 break; 2677 } 2678 m_copydata(m, 4 /* skip 32-bit DMA-len header */, 2679 dmalen + sizeof(struct rt2870_rxd), mtod(m0, caddr_t)); 2680 m0->m_pkthdr.len = m0->m_len = 2681 dmalen + sizeof(struct rt2870_rxd); 2682 run_rx_frame(sc, m0, dmalen); 2683 2684 /* update data ptr */ 2685 m->m_data += dmalen + 8; 2686 m->m_pkthdr.len = m->m_len -= dmalen + 8; 2687 } 2688 2689 RUN_LOCK(sc); 2690} 2691 2692static void 2693run_tx_free(struct run_endpoint_queue *pq, 2694 struct run_tx_data *data, int txerr) 2695{ 2696 if (data->m != NULL) { 2697 if (data->m->m_flags & M_TXCB) 2698 ieee80211_process_callback(data->ni, data->m, 2699 txerr ? ETIMEDOUT : 0); 2700 m_freem(data->m); 2701 data->m = NULL; 2702 2703 if (data->ni == NULL) { 2704 DPRINTF("no node\n"); 2705 } else { 2706 ieee80211_free_node(data->ni); 2707 data->ni = NULL; 2708 } 2709 } 2710 2711 STAILQ_INSERT_TAIL(&pq->tx_fh, data, next); 2712 pq->tx_nfree++; 2713} 2714 2715static void 2716run_bulk_tx_callbackN(struct usb_xfer *xfer, usb_error_t error, unsigned int index) 2717{ 2718 struct run_softc *sc = usbd_xfer_softc(xfer); 2719 struct ifnet *ifp = sc->sc_ifp; 2720 struct ieee80211com *ic = ifp->if_l2com; 2721 struct run_tx_data *data; 2722 struct ieee80211vap *vap = NULL; 2723 struct usb_page_cache *pc; 2724 struct run_endpoint_queue *pq = &sc->sc_epq[index]; 2725 struct mbuf *m; 2726 usb_frlength_t size; 2727 int actlen; 2728 int sumlen; 2729 2730 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 2731 2732 switch (USB_GET_STATE(xfer)) { 2733 case USB_ST_TRANSFERRED: 2734 DPRINTFN(11, "transfer complete: %d " 2735 "bytes @ index %d\n", actlen, index); 2736 2737 data = usbd_xfer_get_priv(xfer); 2738 2739 run_tx_free(pq, data, 0); 2740 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2741 2742 usbd_xfer_set_priv(xfer, NULL); 2743 2744 ifp->if_opackets++; 2745 2746 /* FALLTHROUGH */ 2747 case USB_ST_SETUP: 2748tr_setup: 2749 data = STAILQ_FIRST(&pq->tx_qh); 2750 if (data == NULL) 2751 break; 2752 2753 STAILQ_REMOVE_HEAD(&pq->tx_qh, next); 2754 2755 m = data->m; 2756 if ((m->m_pkthdr.len + 2757 sizeof(data->desc) + 3 + 8) > RUN_MAX_TXSZ) { 2758 DPRINTF("data overflow, %u bytes\n", 2759 m->m_pkthdr.len); 2760 2761 ifp->if_oerrors++; 2762 2763 run_tx_free(pq, data, 1); 2764 2765 goto tr_setup; 2766 } 2767 2768 pc = usbd_xfer_get_frame(xfer, 0); 2769 size = sizeof(data->desc); 2770 usbd_copy_in(pc, 0, &data->desc, size); 2771 usbd_m_copy_in(pc, size, m, 0, m->m_pkthdr.len); 2772 size += m->m_pkthdr.len; 2773 /* 2774 * Align end on a 4-byte boundary, pad 8 bytes (CRC + 2775 * 4-byte padding), and be sure to zero those trailing 2776 * bytes: 2777 */ 2778 usbd_frame_zero(pc, size, ((-size) & 3) + 8); 2779 size += ((-size) & 3) + 8; 2780 2781 vap = data->ni->ni_vap; 2782 if (ieee80211_radiotap_active_vap(vap)) { 2783 struct run_tx_radiotap_header *tap = &sc->sc_txtap; 2784 struct rt2860_txwi *txwi = 2785 (struct rt2860_txwi *)(&data->desc + sizeof(struct rt2870_txd)); 2786 2787 tap->wt_flags = 0; 2788 tap->wt_rate = rt2860_rates[data->ridx].rate; 2789 tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq); 2790 tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags); 2791 tap->wt_hwqueue = index; 2792 if (le16toh(txwi->phy) & RT2860_PHY_SHPRE) 2793 tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 2794 2795 ieee80211_radiotap_tx(vap, m); 2796 } 2797 2798 DPRINTFN(11, "sending frame len=%u/%u @ index %d\n", 2799 m->m_pkthdr.len, size, index); 2800 2801 usbd_xfer_set_frame_len(xfer, 0, size); 2802 usbd_xfer_set_priv(xfer, data); 2803 2804 usbd_transfer_submit(xfer); 2805 2806 RUN_UNLOCK(sc); 2807 run_start(ifp); 2808 RUN_LOCK(sc); 2809 2810 break; 2811 2812 default: 2813 DPRINTF("USB transfer error, %s\n", 2814 usbd_errstr(error)); 2815 2816 data = usbd_xfer_get_priv(xfer); 2817 2818 ifp->if_oerrors++; 2819 2820 if (data != NULL) { 2821 if(data->ni != NULL) 2822 vap = data->ni->ni_vap; 2823 run_tx_free(pq, data, error); 2824 usbd_xfer_set_priv(xfer, NULL); 2825 } 2826 if (vap == NULL) 2827 vap = TAILQ_FIRST(&ic->ic_vaps); 2828 2829 if (error != USB_ERR_CANCELLED) { 2830 if (error == USB_ERR_TIMEOUT) { 2831 device_printf(sc->sc_dev, "device timeout\n"); 2832 uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store); 2833 DPRINTF("cmdq_store=%d\n", i); 2834 sc->cmdq[i].func = run_usb_timeout_cb; 2835 sc->cmdq[i].arg0 = vap; 2836 ieee80211_runtask(ic, &sc->cmdq_task); 2837 } 2838 2839 /* 2840 * Try to clear stall first, also if other 2841 * errors occur, hence clearing stall 2842 * introduces a 50 ms delay: 2843 */ 2844 usbd_xfer_set_stall(xfer); 2845 goto tr_setup; 2846 } 2847 break; 2848 } 2849} 2850 2851static void 2852run_bulk_tx_callback0(struct usb_xfer *xfer, usb_error_t error) 2853{ 2854 run_bulk_tx_callbackN(xfer, error, 0); 2855} 2856 2857static void 2858run_bulk_tx_callback1(struct usb_xfer *xfer, usb_error_t error) 2859{ 2860 run_bulk_tx_callbackN(xfer, error, 1); 2861} 2862 2863static void 2864run_bulk_tx_callback2(struct usb_xfer *xfer, usb_error_t error) 2865{ 2866 run_bulk_tx_callbackN(xfer, error, 2); 2867} 2868 2869static void 2870run_bulk_tx_callback3(struct usb_xfer *xfer, usb_error_t error) 2871{ 2872 run_bulk_tx_callbackN(xfer, error, 3); 2873} 2874 2875static void 2876run_bulk_tx_callback4(struct usb_xfer *xfer, usb_error_t error) 2877{ 2878 run_bulk_tx_callbackN(xfer, error, 4); 2879} 2880 2881static void 2882run_bulk_tx_callback5(struct usb_xfer *xfer, usb_error_t error) 2883{ 2884 run_bulk_tx_callbackN(xfer, error, 5); 2885} 2886 2887static void 2888run_set_tx_desc(struct run_softc *sc, struct run_tx_data *data) 2889{ 2890 struct mbuf *m = data->m; 2891 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 2892 struct ieee80211vap *vap = data->ni->ni_vap; 2893 struct ieee80211_frame *wh; 2894 struct rt2870_txd *txd; 2895 struct rt2860_txwi *txwi; 2896 uint16_t xferlen; 2897 uint16_t mcs; 2898 uint8_t ridx = data->ridx; 2899 uint8_t pad; 2900 2901 /* get MCS code from rate index */ 2902 mcs = rt2860_rates[ridx].mcs; 2903 2904 xferlen = sizeof(*txwi) + m->m_pkthdr.len; 2905 2906 /* roundup to 32-bit alignment */ 2907 xferlen = (xferlen + 3) & ~3; 2908 2909 txd = (struct rt2870_txd *)&data->desc; 2910 txd->len = htole16(xferlen); 2911 2912 wh = mtod(m, struct ieee80211_frame *); 2913 2914 /* 2915 * Ether both are true or both are false, the header 2916 * are nicely aligned to 32-bit. So, no L2 padding. 2917 */ 2918 if(IEEE80211_HAS_ADDR4(wh) == IEEE80211_QOS_HAS_SEQ(wh)) 2919 pad = 0; 2920 else 2921 pad = 2; 2922 2923 /* setup TX Wireless Information */ 2924 txwi = (struct rt2860_txwi *)(txd + 1); 2925 txwi->len = htole16(m->m_pkthdr.len - pad); 2926 if (rt2860_rates[ridx].phy == IEEE80211_T_DS) { 2927 txwi->phy = htole16(RT2860_PHY_CCK); 2928 if (ridx != RT2860_RIDX_CCK1 && 2929 (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 2930 mcs |= RT2860_PHY_SHPRE; 2931 } else 2932 txwi->phy = htole16(RT2860_PHY_OFDM); 2933 txwi->phy |= htole16(mcs); 2934 2935 /* check if RTS/CTS or CTS-to-self protection is required */ 2936 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 2937 (m->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold || 2938 ((ic->ic_flags & IEEE80211_F_USEPROT) && 2939 rt2860_rates[ridx].phy == IEEE80211_T_OFDM))) 2940 txwi->txop |= RT2860_TX_TXOP_HT; 2941 else 2942 txwi->txop |= RT2860_TX_TXOP_BACKOFF; 2943 2944 if (vap->iv_opmode != IEEE80211_M_STA && !IEEE80211_QOS_HAS_SEQ(wh)) 2945 txwi->xflags |= RT2860_TX_NSEQ; 2946} 2947 2948/* This function must be called locked */ 2949static int 2950run_tx(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni) 2951{ 2952 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 2953 struct ieee80211vap *vap = ni->ni_vap; 2954 struct ieee80211_frame *wh; 2955 struct ieee80211_channel *chan; 2956 const struct ieee80211_txparam *tp; 2957 struct run_node *rn = (void *)ni; 2958 struct run_tx_data *data; 2959 struct rt2870_txd *txd; 2960 struct rt2860_txwi *txwi; 2961 uint16_t qos; 2962 uint16_t dur; 2963 uint16_t qid; 2964 uint8_t type; 2965 uint8_t tid; 2966 uint8_t ridx; 2967 uint8_t ctl_ridx; 2968 uint8_t qflags; 2969 uint8_t xflags = 0; 2970 int hasqos; 2971 2972 RUN_LOCK_ASSERT(sc, MA_OWNED); 2973 2974 wh = mtod(m, struct ieee80211_frame *); 2975 2976 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 2977 2978 /* 2979 * There are 7 bulk endpoints: 1 for RX 2980 * and 6 for TX (4 EDCAs + HCCA + Prio). 2981 * Update 03-14-2009: some devices like the Planex GW-US300MiniS 2982 * seem to have only 4 TX bulk endpoints (Fukaumi Naoki). 2983 */ 2984 if ((hasqos = IEEE80211_QOS_HAS_SEQ(wh))) { 2985 uint8_t *frm; 2986 2987 if(IEEE80211_HAS_ADDR4(wh)) 2988 frm = ((struct ieee80211_qosframe_addr4 *)wh)->i_qos; 2989 else 2990 frm =((struct ieee80211_qosframe *)wh)->i_qos; 2991 2992 qos = le16toh(*(const uint16_t *)frm); 2993 tid = qos & IEEE80211_QOS_TID; 2994 qid = TID_TO_WME_AC(tid); 2995 } else { 2996 qos = 0; 2997 tid = 0; 2998 qid = WME_AC_BE; 2999 } 3000 qflags = (qid < 4) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_HCCA; 3001 3002 DPRINTFN(8, "qos %d\tqid %d\ttid %d\tqflags %x\n", 3003 qos, qid, tid, qflags); 3004 3005 chan = (ni->ni_chan != IEEE80211_CHAN_ANYC)?ni->ni_chan:ic->ic_curchan; 3006 tp = &vap->iv_txparms[ieee80211_chan2mode(chan)]; 3007 3008 /* pickup a rate index */ 3009 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 3010 type != IEEE80211_FC0_TYPE_DATA) { 3011 ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ? 3012 RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1; 3013 ctl_ridx = rt2860_rates[ridx].ctl_ridx; 3014 } else { 3015 if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) 3016 ridx = rn->fix_ridx; 3017 else 3018 ridx = rn->amrr_ridx; 3019 ctl_ridx = rt2860_rates[ridx].ctl_ridx; 3020 } 3021 3022 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 3023 (!hasqos || (qos & IEEE80211_QOS_ACKPOLICY) != 3024 IEEE80211_QOS_ACKPOLICY_NOACK)) { 3025 xflags |= RT2860_TX_ACK; 3026 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 3027 dur = rt2860_rates[ctl_ridx].sp_ack_dur; 3028 else 3029 dur = rt2860_rates[ctl_ridx].lp_ack_dur; 3030 *(uint16_t *)wh->i_dur = htole16(dur); 3031 } 3032 3033 /* reserve slots for mgmt packets, just in case */ 3034 if (sc->sc_epq[qid].tx_nfree < 3) { 3035 DPRINTFN(10, "tx ring %d is full\n", qid); 3036 return (-1); 3037 } 3038 3039 data = STAILQ_FIRST(&sc->sc_epq[qid].tx_fh); 3040 STAILQ_REMOVE_HEAD(&sc->sc_epq[qid].tx_fh, next); 3041 sc->sc_epq[qid].tx_nfree--; 3042 3043 txd = (struct rt2870_txd *)&data->desc; 3044 txd->flags = qflags; 3045 txwi = (struct rt2860_txwi *)(txd + 1); 3046 txwi->xflags = xflags; 3047 txwi->wcid = IEEE80211_IS_MULTICAST(wh->i_addr1) ? 3048 0 : RUN_AID2WCID(ni->ni_associd); 3049 /* clear leftover garbage bits */ 3050 txwi->flags = 0; 3051 txwi->txop = 0; 3052 3053 data->m = m; 3054 data->ni = ni; 3055 data->ridx = ridx; 3056 3057 run_set_tx_desc(sc, data); 3058 3059 /* 3060 * The chip keeps track of 2 kind of Tx stats, 3061 * * TX_STAT_FIFO, for per WCID stats, and 3062 * * TX_STA_CNT0 for all-TX-in-one stats. 3063 * 3064 * To use FIFO stats, we need to store MCS into the driver-private 3065 * PacketID field. So that, we can tell whose stats when we read them. 3066 * We add 1 to the MCS because setting the PacketID field to 0 means 3067 * that we don't want feedback in TX_STAT_FIFO. 3068 * And, that's what we want for STA mode, since TX_STA_CNT0 does the job. 3069 * 3070 * FIFO stats doesn't count Tx with WCID 0xff, so we do this in run_tx(). 3071 */ 3072 if (sc->rvp_cnt > 1 || vap->iv_opmode == IEEE80211_M_HOSTAP || 3073 vap->iv_opmode == IEEE80211_M_MBSS) { 3074 uint16_t pid = (rt2860_rates[ridx].mcs + 1) & 0xf; 3075 txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT); 3076 3077 /* 3078 * Unlike PCI based devices, we don't get any interrupt from 3079 * USB devices, so we simulate FIFO-is-full interrupt here. 3080 * Ralink recomends to drain FIFO stats every 100 ms, but 16 slots 3081 * quickly get fulled. To prevent overflow, increment a counter on 3082 * every FIFO stat request, so we know how many slots are left. 3083 * We do this only in HOSTAP or multiple vap mode since FIFO stats 3084 * are used only in those modes. 3085 * We just drain stats. AMRR gets updated every 1 sec by 3086 * run_ratectl_cb() via callout. 3087 * Call it early. Otherwise overflow. 3088 */ 3089 if (sc->fifo_cnt++ == 10) { 3090 /* 3091 * With multiple vaps or if_bridge, if_start() is called 3092 * with a non-sleepable lock, tcpinp. So, need to defer. 3093 */ 3094 uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store); 3095 DPRINTFN(6, "cmdq_store=%d\n", i); 3096 sc->cmdq[i].func = run_drain_fifo; 3097 sc->cmdq[i].arg0 = sc; 3098 ieee80211_runtask(ic, &sc->cmdq_task); 3099 } 3100 } 3101 3102 STAILQ_INSERT_TAIL(&sc->sc_epq[qid].tx_qh, data, next); 3103 3104 usbd_transfer_start(sc->sc_xfer[qid]); 3105 3106 DPRINTFN(8, "sending data frame len=%d rate=%d qid=%d\n", m->m_pkthdr.len + 3107 (int)(sizeof (struct rt2870_txd) + sizeof (struct rt2860_rxwi)), 3108 rt2860_rates[ridx].rate, qid); 3109 3110 return (0); 3111} 3112 3113static int 3114run_tx_mgt(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni) 3115{ 3116 struct ifnet *ifp = sc->sc_ifp; 3117 struct ieee80211com *ic = ifp->if_l2com; 3118 struct run_node *rn = (void *)ni; 3119 struct run_tx_data *data; 3120 struct ieee80211_frame *wh; 3121 struct rt2870_txd *txd; 3122 struct rt2860_txwi *txwi; 3123 uint16_t dur; 3124 uint8_t ridx = rn->mgt_ridx; 3125 uint8_t type; 3126 uint8_t xflags = 0; 3127 uint8_t wflags = 0; 3128 3129 RUN_LOCK_ASSERT(sc, MA_OWNED); 3130 3131 wh = mtod(m, struct ieee80211_frame *); 3132 3133 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 3134 3135 /* tell hardware to add timestamp for probe responses */ 3136 if ((wh->i_fc[0] & 3137 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 3138 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 3139 wflags |= RT2860_TX_TS; 3140 else if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 3141 xflags |= RT2860_TX_ACK; 3142 3143 dur = ieee80211_ack_duration(ic->ic_rt, rt2860_rates[ridx].rate, 3144 ic->ic_flags & IEEE80211_F_SHPREAMBLE); 3145 *(uint16_t *)wh->i_dur = htole16(dur); 3146 } 3147 3148 if (sc->sc_epq[0].tx_nfree == 0) { 3149 /* let caller free mbuf */ 3150 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 3151 return (EIO); 3152 } 3153 data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); 3154 STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); 3155 sc->sc_epq[0].tx_nfree--; 3156 3157 txd = (struct rt2870_txd *)&data->desc; 3158 txd->flags = RT2860_TX_QSEL_EDCA; 3159 txwi = (struct rt2860_txwi *)(txd + 1); 3160 txwi->wcid = 0xff; 3161 txwi->flags = wflags; 3162 txwi->xflags = xflags; 3163 txwi->txop = 0; /* clear leftover garbage bits */ 3164 3165 data->m = m; 3166 data->ni = ni; 3167 data->ridx = ridx; 3168 3169 run_set_tx_desc(sc, data); 3170 3171 DPRINTFN(10, "sending mgt frame len=%d rate=%d\n", m->m_pkthdr.len + 3172 (int)(sizeof (struct rt2870_txd) + sizeof (struct rt2860_rxwi)), 3173 rt2860_rates[ridx].rate); 3174 3175 STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); 3176 3177 usbd_transfer_start(sc->sc_xfer[0]); 3178 3179 return (0); 3180} 3181 3182static int 3183run_sendprot(struct run_softc *sc, 3184 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 3185{ 3186 struct ieee80211com *ic = ni->ni_ic; 3187 struct ieee80211_frame *wh; 3188 struct run_tx_data *data; 3189 struct rt2870_txd *txd; 3190 struct rt2860_txwi *txwi; 3191 struct mbuf *mprot; 3192 int ridx; 3193 int protrate; 3194 int ackrate; 3195 int pktlen; 3196 int isshort; 3197 uint16_t dur; 3198 uint8_t type; 3199 uint8_t wflags = 0; 3200 uint8_t xflags = 0; 3201 3202 RUN_LOCK_ASSERT(sc, MA_OWNED); 3203 3204 KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY, 3205 ("protection %d", prot)); 3206 3207 wh = mtod(m, struct ieee80211_frame *); 3208 pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN; 3209 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 3210 3211 protrate = ieee80211_ctl_rate(ic->ic_rt, rate); 3212 ackrate = ieee80211_ack_rate(ic->ic_rt, rate); 3213 3214 isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0; 3215 dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort) 3216 + ieee80211_ack_duration(ic->ic_rt, rate, isshort); 3217 wflags = RT2860_TX_FRAG; 3218 3219 /* check that there are free slots before allocating the mbuf */ 3220 if (sc->sc_epq[0].tx_nfree == 0) { 3221 /* let caller free mbuf */ 3222 sc->sc_ifp->if_drv_flags |= IFF_DRV_OACTIVE; 3223 return (ENOBUFS); 3224 } 3225 3226 if (prot == IEEE80211_PROT_RTSCTS) { 3227 /* NB: CTS is the same size as an ACK */ 3228 dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort); 3229 xflags |= RT2860_TX_ACK; 3230 mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur); 3231 } else { 3232 mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur); 3233 } 3234 if (mprot == NULL) { 3235 sc->sc_ifp->if_oerrors++; 3236 DPRINTF("could not allocate mbuf\n"); 3237 return (ENOBUFS); 3238 } 3239 3240 data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); 3241 STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); 3242 sc->sc_epq[0].tx_nfree--; 3243 3244 txd = (struct rt2870_txd *)&data->desc; 3245 txd->flags = RT2860_TX_QSEL_EDCA; 3246 txwi = (struct rt2860_txwi *)(txd + 1); 3247 txwi->wcid = 0xff; 3248 txwi->flags = wflags; 3249 txwi->xflags = xflags; 3250 txwi->txop = 0; /* clear leftover garbage bits */ 3251 3252 data->m = mprot; 3253 data->ni = ieee80211_ref_node(ni); 3254 3255 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 3256 if (rt2860_rates[ridx].rate == protrate) 3257 break; 3258 data->ridx = ridx; 3259 3260 run_set_tx_desc(sc, data); 3261 3262 DPRINTFN(1, "sending prot len=%u rate=%u\n", 3263 m->m_pkthdr.len, rate); 3264 3265 STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); 3266 3267 usbd_transfer_start(sc->sc_xfer[0]); 3268 3269 return (0); 3270} 3271 3272static int 3273run_tx_param(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni, 3274 const struct ieee80211_bpf_params *params) 3275{ 3276 struct ieee80211com *ic = ni->ni_ic; 3277 struct ieee80211_frame *wh; 3278 struct run_tx_data *data; 3279 struct rt2870_txd *txd; 3280 struct rt2860_txwi *txwi; 3281 uint8_t type; 3282 uint8_t ridx; 3283 uint8_t rate; 3284 uint8_t opflags = 0; 3285 uint8_t xflags = 0; 3286 int error; 3287 3288 RUN_LOCK_ASSERT(sc, MA_OWNED); 3289 3290 KASSERT(params != NULL, ("no raw xmit params")); 3291 3292 wh = mtod(m, struct ieee80211_frame *); 3293 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 3294 3295 rate = params->ibp_rate0; 3296 if (!ieee80211_isratevalid(ic->ic_rt, rate)) { 3297 /* let caller free mbuf */ 3298 return (EINVAL); 3299 } 3300 3301 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) 3302 xflags |= RT2860_TX_ACK; 3303 if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) { 3304 error = run_sendprot(sc, m, ni, 3305 params->ibp_flags & IEEE80211_BPF_RTS ? 3306 IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY, 3307 rate); 3308 if (error) { 3309 /* let caller free mbuf */ 3310 return error; 3311 } 3312 opflags |= /*XXX RT2573_TX_LONG_RETRY |*/ RT2860_TX_TXOP_SIFS; 3313 } 3314 3315 if (sc->sc_epq[0].tx_nfree == 0) { 3316 /* let caller free mbuf */ 3317 sc->sc_ifp->if_drv_flags |= IFF_DRV_OACTIVE; 3318 DPRINTF("sending raw frame, but tx ring is full\n"); 3319 return (EIO); 3320 } 3321 data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); 3322 STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); 3323 sc->sc_epq[0].tx_nfree--; 3324 3325 txd = (struct rt2870_txd *)&data->desc; 3326 txd->flags = RT2860_TX_QSEL_EDCA; 3327 txwi = (struct rt2860_txwi *)(txd + 1); 3328 txwi->wcid = 0xff; 3329 txwi->xflags = xflags; 3330 txwi->txop = opflags; 3331 txwi->flags = 0; /* clear leftover garbage bits */ 3332 3333 data->m = m; 3334 data->ni = ni; 3335 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 3336 if (rt2860_rates[ridx].rate == rate) 3337 break; 3338 data->ridx = ridx; 3339 3340 run_set_tx_desc(sc, data); 3341 3342 DPRINTFN(10, "sending raw frame len=%u rate=%u\n", 3343 m->m_pkthdr.len, rate); 3344 3345 STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); 3346 3347 usbd_transfer_start(sc->sc_xfer[0]); 3348 3349 return (0); 3350} 3351 3352static int 3353run_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 3354 const struct ieee80211_bpf_params *params) 3355{ 3356 struct ifnet *ifp = ni->ni_ic->ic_ifp; 3357 struct run_softc *sc = ifp->if_softc; 3358 int error = 0; 3359 3360 RUN_LOCK(sc); 3361 3362 /* prevent management frames from being sent if we're not ready */ 3363 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 3364 error = ENETDOWN; 3365 goto done; 3366 } 3367 3368 if (params == NULL) { 3369 /* tx mgt packet */ 3370 if ((error = run_tx_mgt(sc, m, ni)) != 0) { 3371 ifp->if_oerrors++; 3372 DPRINTF("mgt tx failed\n"); 3373 goto done; 3374 } 3375 } else { 3376 /* tx raw packet with param */ 3377 if ((error = run_tx_param(sc, m, ni, params)) != 0) { 3378 ifp->if_oerrors++; 3379 DPRINTF("tx with param failed\n"); 3380 goto done; 3381 } 3382 } 3383 3384 ifp->if_opackets++; 3385 3386done: 3387 RUN_UNLOCK(sc); 3388 3389 if (error != 0) { 3390 if(m != NULL) 3391 m_freem(m); 3392 ieee80211_free_node(ni); 3393 } 3394 3395 return (error); 3396} 3397 3398static void 3399run_start(struct ifnet *ifp) 3400{ 3401 struct run_softc *sc = ifp->if_softc; 3402 struct ieee80211_node *ni; 3403 struct mbuf *m; 3404 3405 RUN_LOCK(sc); 3406 3407 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 3408 RUN_UNLOCK(sc); 3409 return; 3410 } 3411 3412 for (;;) { 3413 /* send data frames */ 3414 IFQ_DRV_DEQUEUE(&ifp->if_snd, m); 3415 if (m == NULL) 3416 break; 3417 3418 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 3419 if (run_tx(sc, m, ni) != 0) { 3420 IFQ_DRV_PREPEND(&ifp->if_snd, m); 3421 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 3422 break; 3423 } 3424 } 3425 3426 RUN_UNLOCK(sc); 3427} 3428 3429static int 3430run_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 3431{ 3432 struct run_softc *sc = ifp->if_softc; 3433 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 3434 struct ifreq *ifr = (struct ifreq *) data; 3435 int startall = 0; 3436 int error = 0; 3437 3438 switch (cmd) { 3439 case SIOCSIFFLAGS: 3440 RUN_LOCK(sc); 3441 if (ifp->if_flags & IFF_UP) { 3442 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)){ 3443 startall = 1; 3444 run_init_locked(sc); 3445 } else 3446 run_update_promisc_locked(ifp); 3447 } else { 3448 if (ifp->if_drv_flags & IFF_DRV_RUNNING && 3449 (ic->ic_nrunning == 0 || sc->rvp_cnt <= 1)) { 3450 run_stop(sc); 3451 } 3452 } 3453 RUN_UNLOCK(sc); 3454 if (startall) 3455 ieee80211_start_all(ic); 3456 break; 3457 case SIOCGIFMEDIA: 3458 error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd); 3459 break; 3460 case SIOCGIFADDR: 3461 error = ether_ioctl(ifp, cmd, data); 3462 break; 3463 default: 3464 error = EINVAL; 3465 break; 3466 } 3467 3468 return (error); 3469} 3470 3471static void 3472run_set_agc(struct run_softc *sc, uint8_t agc) 3473{ 3474 uint8_t bbp; 3475 3476 if (sc->mac_ver == 0x3572) { 3477 run_bbp_read(sc, 27, &bbp); 3478 bbp &= ~(0x3 << 5); 3479 run_bbp_write(sc, 27, bbp | 0 << 5); /* select Rx0 */ 3480 run_bbp_write(sc, 66, agc); 3481 run_bbp_write(sc, 27, bbp | 1 << 5); /* select Rx1 */ 3482 run_bbp_write(sc, 66, agc); 3483 } else 3484 run_bbp_write(sc, 66, agc); 3485} 3486 3487static void 3488run_select_chan_group(struct run_softc *sc, int group) 3489{ 3490 uint32_t tmp; 3491 uint8_t agc; 3492 3493 run_bbp_write(sc, 62, 0x37 - sc->lna[group]); 3494 run_bbp_write(sc, 63, 0x37 - sc->lna[group]); 3495 run_bbp_write(sc, 64, 0x37 - sc->lna[group]); 3496 run_bbp_write(sc, 86, 0x00); 3497 3498 if (group == 0) { 3499 if (sc->ext_2ghz_lna) { 3500 run_bbp_write(sc, 82, 0x62); 3501 run_bbp_write(sc, 75, 0x46); 3502 } else { 3503 run_bbp_write(sc, 82, 0x84); 3504 run_bbp_write(sc, 75, 0x50); 3505 } 3506 } else { 3507 if (sc->mac_ver == 0x3572) 3508 run_bbp_write(sc, 82, 0x94); 3509 else 3510 run_bbp_write(sc, 82, 0xf2); 3511 if (sc->ext_5ghz_lna) 3512 run_bbp_write(sc, 75, 0x46); 3513 else 3514 run_bbp_write(sc, 75, 0x50); 3515 } 3516 3517 run_read(sc, RT2860_TX_BAND_CFG, &tmp); 3518 tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P); 3519 tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P; 3520 run_write(sc, RT2860_TX_BAND_CFG, tmp); 3521 3522 /* enable appropriate Power Amplifiers and Low Noise Amplifiers */ 3523 tmp = RT2860_RFTR_EN | RT2860_TRSW_EN | RT2860_LNA_PE0_EN; 3524 if (sc->nrxchains > 1) 3525 tmp |= RT2860_LNA_PE1_EN; 3526 if (group == 0) { /* 2GHz */ 3527 tmp |= RT2860_PA_PE_G0_EN; 3528 if (sc->ntxchains > 1) 3529 tmp |= RT2860_PA_PE_G1_EN; 3530 } else { /* 5GHz */ 3531 tmp |= RT2860_PA_PE_A0_EN; 3532 if (sc->ntxchains > 1) 3533 tmp |= RT2860_PA_PE_A1_EN; 3534 } 3535 if (sc->mac_ver == 0x3572) { 3536 run_rt3070_rf_write(sc, 8, 0x00); 3537 run_write(sc, RT2860_TX_PIN_CFG, tmp); 3538 run_rt3070_rf_write(sc, 8, 0x80); 3539 } else 3540 run_write(sc, RT2860_TX_PIN_CFG, tmp); 3541 3542 /* set initial AGC value */ 3543 if (group == 0) { /* 2GHz band */ 3544 if (sc->mac_ver >= 0x3070) 3545 agc = 0x1c + sc->lna[0] * 2; 3546 else 3547 agc = 0x2e + sc->lna[0]; 3548 } else { /* 5GHz band */ 3549 if (sc->mac_ver == 0x3572) 3550 agc = 0x22 + (sc->lna[group] * 5) / 3; 3551 else 3552 agc = 0x32 + (sc->lna[group] * 5) / 3; 3553 } 3554 run_set_agc(sc, agc); 3555} 3556 3557static void 3558run_rt2870_set_chan(struct run_softc *sc, uint32_t chan) 3559{ 3560 const struct rfprog *rfprog = rt2860_rf2850; 3561 uint32_t r2, r3, r4; 3562 int8_t txpow1, txpow2; 3563 int i; 3564 3565 /* find the settings for this channel (we know it exists) */ 3566 for (i = 0; rfprog[i].chan != chan; i++); 3567 3568 r2 = rfprog[i].r2; 3569 if (sc->ntxchains == 1) 3570 r2 |= 1 << 12; /* 1T: disable Tx chain 2 */ 3571 if (sc->nrxchains == 1) 3572 r2 |= 1 << 15 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ 3573 else if (sc->nrxchains == 2) 3574 r2 |= 1 << 4; /* 2R: disable Rx chain 3 */ 3575 3576 /* use Tx power values from EEPROM */ 3577 txpow1 = sc->txpow1[i]; 3578 txpow2 = sc->txpow2[i]; 3579 if (chan > 14) { 3580 if (txpow1 >= 0) 3581 txpow1 = txpow1 << 1 | 1; 3582 else 3583 txpow1 = (7 + txpow1) << 1; 3584 if (txpow2 >= 0) 3585 txpow2 = txpow2 << 1 | 1; 3586 else 3587 txpow2 = (7 + txpow2) << 1; 3588 } 3589 r3 = rfprog[i].r3 | txpow1 << 7; 3590 r4 = rfprog[i].r4 | sc->freq << 13 | txpow2 << 4; 3591 3592 run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1); 3593 run_rt2870_rf_write(sc, RT2860_RF2, r2); 3594 run_rt2870_rf_write(sc, RT2860_RF3, r3); 3595 run_rt2870_rf_write(sc, RT2860_RF4, r4); 3596 3597 run_delay(sc, 10); 3598 3599 run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1); 3600 run_rt2870_rf_write(sc, RT2860_RF2, r2); 3601 run_rt2870_rf_write(sc, RT2860_RF3, r3 | 1); 3602 run_rt2870_rf_write(sc, RT2860_RF4, r4); 3603 3604 run_delay(sc, 10); 3605 3606 run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1); 3607 run_rt2870_rf_write(sc, RT2860_RF2, r2); 3608 run_rt2870_rf_write(sc, RT2860_RF3, r3); 3609 run_rt2870_rf_write(sc, RT2860_RF4, r4); 3610} 3611 3612static void 3613run_rt3070_set_chan(struct run_softc *sc, uint32_t chan) 3614{ 3615 int8_t txpow1, txpow2; 3616 uint8_t rf; 3617 int i; 3618 3619 /* RT3070 is 2GHz only */ 3620 KASSERT(chan >= 1 && chan <= 14, ("wrong channel selected\n")); 3621 3622 /* find the settings for this channel (we know it exists) */ 3623 for (i = 0; rt2860_rf2850[i].chan != chan; i++); 3624 3625 /* use Tx power values from EEPROM */ 3626 txpow1 = sc->txpow1[i]; 3627 txpow2 = sc->txpow2[i]; 3628 3629 run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n); 3630 run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k); 3631 run_rt3070_rf_read(sc, 6, &rf); 3632 rf = (rf & ~0x03) | rt3070_freqs[i].r; 3633 run_rt3070_rf_write(sc, 6, rf); 3634 3635 /* set Tx0 power */ 3636 run_rt3070_rf_read(sc, 12, &rf); 3637 rf = (rf & ~0x1f) | txpow1; 3638 run_rt3070_rf_write(sc, 12, rf); 3639 3640 /* set Tx1 power */ 3641 run_rt3070_rf_read(sc, 13, &rf); 3642 rf = (rf & ~0x1f) | txpow2; 3643 run_rt3070_rf_write(sc, 13, rf); 3644 3645 run_rt3070_rf_read(sc, 1, &rf); 3646 rf &= ~0xfc; 3647 if (sc->ntxchains == 1) 3648 rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */ 3649 else if (sc->ntxchains == 2) 3650 rf |= 1 << 7; /* 2T: disable Tx chain 3 */ 3651 if (sc->nrxchains == 1) 3652 rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ 3653 else if (sc->nrxchains == 2) 3654 rf |= 1 << 6; /* 2R: disable Rx chain 3 */ 3655 run_rt3070_rf_write(sc, 1, rf); 3656 3657 /* set RF offset */ 3658 run_rt3070_rf_read(sc, 23, &rf); 3659 rf = (rf & ~0x7f) | sc->freq; 3660 run_rt3070_rf_write(sc, 23, rf); 3661 3662 /* program RF filter */ 3663 run_rt3070_rf_read(sc, 24, &rf); /* Tx */ 3664 rf = (rf & ~0x3f) | sc->rf24_20mhz; 3665 run_rt3070_rf_write(sc, 24, rf); 3666 run_rt3070_rf_read(sc, 31, &rf); /* Rx */ 3667 rf = (rf & ~0x3f) | sc->rf24_20mhz; 3668 run_rt3070_rf_write(sc, 31, rf); 3669 3670 /* enable RF tuning */ 3671 run_rt3070_rf_read(sc, 7, &rf); 3672 run_rt3070_rf_write(sc, 7, rf | 0x01); 3673} 3674 3675static void 3676run_rt3572_set_chan(struct run_softc *sc, u_int chan) 3677{ 3678 int8_t txpow1, txpow2; 3679 uint32_t tmp; 3680 uint8_t rf; 3681 int i; 3682 3683 /* find the settings for this channel (we know it exists) */ 3684 for (i = 0; rt2860_rf2850[i].chan != chan; i++); 3685 3686 /* use Tx power values from EEPROM */ 3687 txpow1 = sc->txpow1[i]; 3688 txpow2 = sc->txpow2[i]; 3689 3690 if (chan <= 14) { 3691 run_bbp_write(sc, 25, sc->bbp25); 3692 run_bbp_write(sc, 26, sc->bbp26); 3693 } else { 3694 /* enable IQ phase correction */ 3695 run_bbp_write(sc, 25, 0x09); 3696 run_bbp_write(sc, 26, 0xff); 3697 } 3698 3699 run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n); 3700 run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k); 3701 run_rt3070_rf_read(sc, 6, &rf); 3702 rf = (rf & ~0x0f) | rt3070_freqs[i].r; 3703 rf |= (chan <= 14) ? 0x08 : 0x04; 3704 run_rt3070_rf_write(sc, 6, rf); 3705 3706 /* set PLL mode */ 3707 run_rt3070_rf_read(sc, 5, &rf); 3708 rf &= ~(0x08 | 0x04); 3709 rf |= (chan <= 14) ? 0x04 : 0x08; 3710 run_rt3070_rf_write(sc, 5, rf); 3711 3712 /* set Tx power for chain 0 */ 3713 if (chan <= 14) 3714 rf = 0x60 | txpow1; 3715 else 3716 rf = 0xe0 | (txpow1 & 0xc) << 1 | (txpow1 & 0x3); 3717 run_rt3070_rf_write(sc, 12, rf); 3718 3719 /* set Tx power for chain 1 */ 3720 if (chan <= 14) 3721 rf = 0x60 | txpow2; 3722 else 3723 rf = 0xe0 | (txpow2 & 0xc) << 1 | (txpow2 & 0x3); 3724 run_rt3070_rf_write(sc, 13, rf); 3725 3726 /* set Tx/Rx streams */ 3727 run_rt3070_rf_read(sc, 1, &rf); 3728 rf &= ~0xfc; 3729 if (sc->ntxchains == 1) 3730 rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */ 3731 else if (sc->ntxchains == 2) 3732 rf |= 1 << 7; /* 2T: disable Tx chain 3 */ 3733 if (sc->nrxchains == 1) 3734 rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ 3735 else if (sc->nrxchains == 2) 3736 rf |= 1 << 6; /* 2R: disable Rx chain 3 */ 3737 run_rt3070_rf_write(sc, 1, rf); 3738 3739 /* set RF offset */ 3740 run_rt3070_rf_read(sc, 23, &rf); 3741 rf = (rf & ~0x7f) | sc->freq; 3742 run_rt3070_rf_write(sc, 23, rf); 3743 3744 /* program RF filter */ 3745 rf = sc->rf24_20mhz; 3746 run_rt3070_rf_write(sc, 24, rf); /* Tx */ 3747 run_rt3070_rf_write(sc, 31, rf); /* Rx */ 3748 3749 /* enable RF tuning */ 3750 run_rt3070_rf_read(sc, 7, &rf); 3751 rf = (chan <= 14) ? 0xd8 : ((rf & ~0xc8) | 0x14); 3752 run_rt3070_rf_write(sc, 7, rf); 3753 3754 /* TSSI */ 3755 rf = (chan <= 14) ? 0xc3 : 0xc0; 3756 run_rt3070_rf_write(sc, 9, rf); 3757 3758 /* set loop filter 1 */ 3759 run_rt3070_rf_write(sc, 10, 0xf1); 3760 /* set loop filter 2 */ 3761 run_rt3070_rf_write(sc, 11, (chan <= 14) ? 0xb9 : 0x00); 3762 3763 /* set tx_mx2_ic */ 3764 run_rt3070_rf_write(sc, 15, (chan <= 14) ? 0x53 : 0x43); 3765 /* set tx_mx1_ic */ 3766 if (chan <= 14) 3767 rf = 0x48 | sc->txmixgain_2ghz; 3768 else 3769 rf = 0x78 | sc->txmixgain_5ghz; 3770 run_rt3070_rf_write(sc, 16, rf); 3771 3772 /* set tx_lo1 */ 3773 run_rt3070_rf_write(sc, 17, 0x23); 3774 /* set tx_lo2 */ 3775 if (chan <= 14) 3776 rf = 0x93; 3777 else if (chan <= 64) 3778 rf = 0xb7; 3779 else if (chan <= 128) 3780 rf = 0x74; 3781 else 3782 rf = 0x72; 3783 run_rt3070_rf_write(sc, 19, rf); 3784 3785 /* set rx_lo1 */ 3786 if (chan <= 14) 3787 rf = 0xb3; 3788 else if (chan <= 64) 3789 rf = 0xf6; 3790 else if (chan <= 128) 3791 rf = 0xf4; 3792 else 3793 rf = 0xf3; 3794 run_rt3070_rf_write(sc, 20, rf); 3795 3796 /* set pfd_delay */ 3797 if (chan <= 14) 3798 rf = 0x15; 3799 else if (chan <= 64) 3800 rf = 0x3d; 3801 else 3802 rf = 0x01; 3803 run_rt3070_rf_write(sc, 25, rf); 3804 3805 /* set rx_lo2 */ 3806 run_rt3070_rf_write(sc, 26, (chan <= 14) ? 0x85 : 0x87); 3807 /* set ldo_rf_vc */ 3808 run_rt3070_rf_write(sc, 27, (chan <= 14) ? 0x00 : 0x01); 3809 /* set drv_cc */ 3810 run_rt3070_rf_write(sc, 29, (chan <= 14) ? 0x9b : 0x9f); 3811 3812 run_read(sc, RT2860_GPIO_CTRL, &tmp); 3813 tmp &= ~0x8080; 3814 if (chan <= 14) 3815 tmp |= 0x80; 3816 run_write(sc, RT2860_GPIO_CTRL, tmp); 3817 3818 /* enable RF tuning */ 3819 run_rt3070_rf_read(sc, 7, &rf); 3820 run_rt3070_rf_write(sc, 7, rf | 0x01); 3821 3822 run_delay(sc, 2); 3823} 3824 3825static void 3826run_set_rx_antenna(struct run_softc *sc, int aux) 3827{ 3828 uint32_t tmp; 3829 3830 if (aux) { 3831 run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 0); 3832 run_read(sc, RT2860_GPIO_CTRL, &tmp); 3833 run_write(sc, RT2860_GPIO_CTRL, (tmp & ~0x0808) | 0x08); 3834 } else { 3835 run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 1); 3836 run_read(sc, RT2860_GPIO_CTRL, &tmp); 3837 run_write(sc, RT2860_GPIO_CTRL, tmp & ~0x0808); 3838 } 3839} 3840 3841static int 3842run_set_chan(struct run_softc *sc, struct ieee80211_channel *c) 3843{ 3844 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 3845 uint32_t chan, group; 3846 3847 chan = ieee80211_chan2ieee(ic, c); 3848 if (chan == 0 || chan == IEEE80211_CHAN_ANY) 3849 return (EINVAL); 3850 3851 if (sc->mac_ver == 0x3572) 3852 run_rt3572_set_chan(sc, chan); 3853 else if (sc->mac_ver >= 0x3070) 3854 run_rt3070_set_chan(sc, chan); 3855 else 3856 run_rt2870_set_chan(sc, chan); 3857 3858 /* determine channel group */ 3859 if (chan <= 14) 3860 group = 0; 3861 else if (chan <= 64) 3862 group = 1; 3863 else if (chan <= 128) 3864 group = 2; 3865 else 3866 group = 3; 3867 3868 /* XXX necessary only when group has changed! */ 3869 run_select_chan_group(sc, group); 3870 3871 run_delay(sc, 10); 3872 3873 return (0); 3874} 3875 3876static void 3877run_set_channel(struct ieee80211com *ic) 3878{ 3879 struct run_softc *sc = ic->ic_ifp->if_softc; 3880 3881 RUN_LOCK(sc); 3882 run_set_chan(sc, ic->ic_curchan); 3883 RUN_UNLOCK(sc); 3884 3885 return; 3886} 3887 3888static void 3889run_scan_start(struct ieee80211com *ic) 3890{ 3891 struct run_softc *sc = ic->ic_ifp->if_softc; 3892 uint32_t tmp; 3893 3894 RUN_LOCK(sc); 3895 3896 /* abort TSF synchronization */ 3897 run_read(sc, RT2860_BCN_TIME_CFG, &tmp); 3898 run_write(sc, RT2860_BCN_TIME_CFG, 3899 tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | 3900 RT2860_TBTT_TIMER_EN)); 3901 run_set_bssid(sc, sc->sc_ifp->if_broadcastaddr); 3902 3903 RUN_UNLOCK(sc); 3904 3905 return; 3906} 3907 3908static void 3909run_scan_end(struct ieee80211com *ic) 3910{ 3911 struct run_softc *sc = ic->ic_ifp->if_softc; 3912 3913 RUN_LOCK(sc); 3914 3915 run_enable_tsf_sync(sc); 3916 /* XXX keep local copy */ 3917 run_set_bssid(sc, sc->sc_bssid); 3918 3919 RUN_UNLOCK(sc); 3920 3921 return; 3922} 3923 3924/* 3925 * Could be called from ieee80211_node_timeout() 3926 * (non-sleepable thread) 3927 */ 3928static void 3929run_update_beacon(struct ieee80211vap *vap, int item) 3930{ 3931 struct ieee80211com *ic = vap->iv_ic; 3932 struct run_softc *sc = ic->ic_ifp->if_softc; 3933 struct run_vap *rvp = RUN_VAP(vap); 3934 int mcast = 0; 3935 uint32_t i; 3936 3937 KASSERT(vap != NULL, ("no beacon")); 3938 3939 switch (item) { 3940 case IEEE80211_BEACON_ERP: 3941 run_updateslot(ic->ic_ifp); 3942 break; 3943 case IEEE80211_BEACON_HTINFO: 3944 run_updateprot(ic); 3945 break; 3946 case IEEE80211_BEACON_TIM: 3947 mcast = 1; /*TODO*/ 3948 break; 3949 default: 3950 break; 3951 } 3952 3953 setbit(rvp->bo.bo_flags, item); 3954 ieee80211_beacon_update(vap->iv_bss, &rvp->bo, rvp->beacon_mbuf, mcast); 3955 3956 i = RUN_CMDQ_GET(&sc->cmdq_store); 3957 DPRINTF("cmdq_store=%d\n", i); 3958 sc->cmdq[i].func = run_update_beacon_cb; 3959 sc->cmdq[i].arg0 = vap; 3960 ieee80211_runtask(ic, &sc->cmdq_task); 3961 3962 return; 3963} 3964 3965static void 3966run_update_beacon_cb(void *arg) 3967{ 3968 struct ieee80211vap *vap = arg; 3969 struct run_vap *rvp = RUN_VAP(vap); 3970 struct ieee80211com *ic = vap->iv_ic; 3971 struct run_softc *sc = ic->ic_ifp->if_softc; 3972 struct rt2860_txwi txwi; 3973 struct mbuf *m; 3974 uint8_t ridx; 3975 3976 if (vap->iv_bss->ni_chan == IEEE80211_CHAN_ANYC) 3977 return; 3978 if (ic->ic_bsschan == IEEE80211_CHAN_ANYC) 3979 return; 3980 3981 /* 3982 * No need to call ieee80211_beacon_update(), run_update_beacon() 3983 * is taking care of apropriate calls. 3984 */ 3985 if (rvp->beacon_mbuf == NULL) { 3986 rvp->beacon_mbuf = ieee80211_beacon_alloc(vap->iv_bss, 3987 &rvp->bo); 3988 if (rvp->beacon_mbuf == NULL) 3989 return; 3990 } 3991 m = rvp->beacon_mbuf; 3992 3993 memset(&txwi, 0, sizeof txwi); 3994 txwi.wcid = 0xff; 3995 txwi.len = htole16(m->m_pkthdr.len); 3996 /* send beacons at the lowest available rate */ 3997 ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ? 3998 RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1; 3999 txwi.phy = htole16(rt2860_rates[ridx].mcs); 4000 if (rt2860_rates[ridx].phy == IEEE80211_T_OFDM) 4001 txwi.phy |= htole16(RT2860_PHY_OFDM); 4002 txwi.txop = RT2860_TX_TXOP_HT; 4003 txwi.flags = RT2860_TX_TS; 4004 txwi.xflags = RT2860_TX_NSEQ; 4005 4006 run_write_region_1(sc, RT2860_BCN_BASE(rvp->rvp_id), 4007 (uint8_t *)&txwi, sizeof txwi); 4008 run_write_region_1(sc, RT2860_BCN_BASE(rvp->rvp_id) + sizeof txwi, 4009 mtod(m, uint8_t *), (m->m_pkthdr.len + 1) & ~1); /* roundup len */ 4010 4011 return; 4012} 4013 4014static void 4015run_updateprot(struct ieee80211com *ic) 4016{ 4017 struct run_softc *sc = ic->ic_ifp->if_softc; 4018 uint32_t i; 4019 4020 i = RUN_CMDQ_GET(&sc->cmdq_store); 4021 DPRINTF("cmdq_store=%d\n", i); 4022 sc->cmdq[i].func = run_updateprot_cb; 4023 sc->cmdq[i].arg0 = ic; 4024 ieee80211_runtask(ic, &sc->cmdq_task); 4025} 4026 4027static void 4028run_updateprot_cb(void *arg) 4029{ 4030 struct ieee80211com *ic = arg; 4031 struct run_softc *sc = ic->ic_ifp->if_softc; 4032 uint32_t tmp; 4033 4034 tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL; 4035 /* setup protection frame rate (MCS code) */ 4036 tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ? 4037 rt2860_rates[RT2860_RIDX_OFDM6].mcs : 4038 rt2860_rates[RT2860_RIDX_CCK11].mcs; 4039 4040 /* CCK frames don't require protection */ 4041 run_write(sc, RT2860_CCK_PROT_CFG, tmp); 4042 if (ic->ic_flags & IEEE80211_F_USEPROT) { 4043 if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 4044 tmp |= RT2860_PROT_CTRL_RTS_CTS; 4045 else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 4046 tmp |= RT2860_PROT_CTRL_CTS; 4047 } 4048 run_write(sc, RT2860_OFDM_PROT_CFG, tmp); 4049} 4050 4051static void 4052run_usb_timeout_cb(void *arg) 4053{ 4054 struct ieee80211vap *vap = arg; 4055 struct run_softc *sc = vap->iv_ic->ic_ifp->if_softc; 4056 4057 RUN_LOCK_ASSERT(sc, MA_OWNED); 4058 4059 if(vap->iv_state == IEEE80211_S_RUN && 4060 vap->iv_opmode != IEEE80211_M_STA) 4061 run_reset_livelock(sc); 4062 else if (vap->iv_state == IEEE80211_S_SCAN) { 4063 DPRINTF("timeout caused by scan\n"); 4064 /* cancel bgscan */ 4065 ieee80211_cancel_scan(vap); 4066 } else 4067 DPRINTF("timeout by unknown cause\n"); 4068} 4069 4070static void 4071run_reset_livelock(struct run_softc *sc) 4072{ 4073 uint32_t tmp; 4074 4075 RUN_LOCK_ASSERT(sc, MA_OWNED); 4076 4077 /* 4078 * In IBSS or HostAP modes (when the hardware sends beacons), the MAC 4079 * can run into a livelock and start sending CTS-to-self frames like 4080 * crazy if protection is enabled. Reset MAC/BBP for a while 4081 */ 4082 run_read(sc, RT2860_DEBUG, &tmp); 4083 DPRINTFN(3, "debug reg %08x\n", tmp); 4084 if ((tmp & (1 << 29)) && (tmp & (1 << 7 | 1 << 5))) { 4085 DPRINTF("CTS-to-self livelock detected\n"); 4086 run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_SRST); 4087 run_delay(sc, 1); 4088 run_write(sc, RT2860_MAC_SYS_CTRL, 4089 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 4090 } 4091} 4092 4093static void 4094run_update_promisc_locked(struct ifnet *ifp) 4095{ 4096 struct run_softc *sc = ifp->if_softc; 4097 uint32_t tmp; 4098 4099 run_read(sc, RT2860_RX_FILTR_CFG, &tmp); 4100 4101 tmp |= RT2860_DROP_UC_NOME; 4102 if (ifp->if_flags & IFF_PROMISC) 4103 tmp &= ~RT2860_DROP_UC_NOME; 4104 4105 run_write(sc, RT2860_RX_FILTR_CFG, tmp); 4106 4107 DPRINTF("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ? 4108 "entering" : "leaving"); 4109} 4110 4111static void 4112run_update_promisc(struct ifnet *ifp) 4113{ 4114 struct run_softc *sc = ifp->if_softc; 4115 4116 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) 4117 return; 4118 4119 RUN_LOCK(sc); 4120 run_update_promisc_locked(ifp); 4121 RUN_UNLOCK(sc); 4122} 4123 4124static void 4125run_enable_tsf_sync(struct run_softc *sc) 4126{ 4127 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 4128 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 4129 uint32_t tmp; 4130 4131 DPRINTF("rvp_id=%d ic_opmode=%d\n", RUN_VAP(vap)->rvp_id, ic->ic_opmode); 4132 4133 run_read(sc, RT2860_BCN_TIME_CFG, &tmp); 4134 tmp &= ~0x1fffff; 4135 tmp |= vap->iv_bss->ni_intval * 16; 4136 tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN; 4137 4138 if (ic->ic_opmode == IEEE80211_M_STA) { 4139 /* 4140 * Local TSF is always updated with remote TSF on beacon 4141 * reception. 4142 */ 4143 tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT; 4144 } else if (ic->ic_opmode == IEEE80211_M_IBSS) { 4145 tmp |= RT2860_BCN_TX_EN; 4146 /* 4147 * Local TSF is updated with remote TSF on beacon reception 4148 * only if the remote TSF is greater than local TSF. 4149 */ 4150 tmp |= 2 << RT2860_TSF_SYNC_MODE_SHIFT; 4151 } else if (ic->ic_opmode == IEEE80211_M_HOSTAP || 4152 ic->ic_opmode == IEEE80211_M_MBSS) { 4153 tmp |= RT2860_BCN_TX_EN; 4154 /* SYNC with nobody */ 4155 tmp |= 3 << RT2860_TSF_SYNC_MODE_SHIFT; 4156 } else { 4157 DPRINTF("Enabling TSF failed. undefined opmode\n"); 4158 return; 4159 } 4160 4161 run_write(sc, RT2860_BCN_TIME_CFG, tmp); 4162} 4163 4164static void 4165run_enable_mrr(struct run_softc *sc) 4166{ 4167#define CCK(mcs) (mcs) 4168#define OFDM(mcs) (1 << 3 | (mcs)) 4169 run_write(sc, RT2860_LG_FBK_CFG0, 4170 OFDM(6) << 28 | /* 54->48 */ 4171 OFDM(5) << 24 | /* 48->36 */ 4172 OFDM(4) << 20 | /* 36->24 */ 4173 OFDM(3) << 16 | /* 24->18 */ 4174 OFDM(2) << 12 | /* 18->12 */ 4175 OFDM(1) << 8 | /* 12-> 9 */ 4176 OFDM(0) << 4 | /* 9-> 6 */ 4177 OFDM(0)); /* 6-> 6 */ 4178 4179 run_write(sc, RT2860_LG_FBK_CFG1, 4180 CCK(2) << 12 | /* 11->5.5 */ 4181 CCK(1) << 8 | /* 5.5-> 2 */ 4182 CCK(0) << 4 | /* 2-> 1 */ 4183 CCK(0)); /* 1-> 1 */ 4184#undef OFDM 4185#undef CCK 4186} 4187 4188static void 4189run_set_txpreamble(struct run_softc *sc) 4190{ 4191 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 4192 uint32_t tmp; 4193 4194 run_read(sc, RT2860_AUTO_RSP_CFG, &tmp); 4195 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 4196 tmp |= RT2860_CCK_SHORT_EN; 4197 else 4198 tmp &= ~RT2860_CCK_SHORT_EN; 4199 run_write(sc, RT2860_AUTO_RSP_CFG, tmp); 4200} 4201 4202static void 4203run_set_basicrates(struct run_softc *sc) 4204{ 4205 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 4206 4207 /* set basic rates mask */ 4208 if (ic->ic_curmode == IEEE80211_MODE_11B) 4209 run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x003); 4210 else if (ic->ic_curmode == IEEE80211_MODE_11A) 4211 run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x150); 4212 else /* 11g */ 4213 run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x15f); 4214} 4215 4216static void 4217run_set_leds(struct run_softc *sc, uint16_t which) 4218{ 4219 (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LEDS, 4220 which | (sc->leds & 0x7f)); 4221} 4222 4223static void 4224run_set_bssid(struct run_softc *sc, const uint8_t *bssid) 4225{ 4226 run_write(sc, RT2860_MAC_BSSID_DW0, 4227 bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24); 4228 run_write(sc, RT2860_MAC_BSSID_DW1, 4229 bssid[4] | bssid[5] << 8); 4230} 4231 4232static void 4233run_set_macaddr(struct run_softc *sc, const uint8_t *addr) 4234{ 4235 run_write(sc, RT2860_MAC_ADDR_DW0, 4236 addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24); 4237 run_write(sc, RT2860_MAC_ADDR_DW1, 4238 addr[4] | addr[5] << 8 | 0xff << 16); 4239} 4240 4241static void 4242run_updateslot(struct ifnet *ifp) 4243{ 4244 struct run_softc *sc = ifp->if_softc; 4245 struct ieee80211com *ic = ifp->if_l2com; 4246 uint32_t i; 4247 4248 i = RUN_CMDQ_GET(&sc->cmdq_store); 4249 DPRINTF("cmdq_store=%d\n", i); 4250 sc->cmdq[i].func = run_updateslot_cb; 4251 sc->cmdq[i].arg0 = ifp; 4252 ieee80211_runtask(ic, &sc->cmdq_task); 4253 4254 return; 4255} 4256 4257/* ARGSUSED */ 4258static void 4259run_updateslot_cb(void *arg) 4260{ 4261 struct ifnet *ifp = arg; 4262 struct run_softc *sc = ifp->if_softc; 4263 struct ieee80211com *ic = ifp->if_l2com; 4264 uint32_t tmp; 4265 4266 run_read(sc, RT2860_BKOFF_SLOT_CFG, &tmp); 4267 tmp &= ~0xff; 4268 tmp |= (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; 4269 run_write(sc, RT2860_BKOFF_SLOT_CFG, tmp); 4270} 4271 4272static void 4273run_update_mcast(struct ifnet *ifp) 4274{ 4275 /* h/w filter supports getting everything or nothing */ 4276 ifp->if_flags |= IFF_ALLMULTI; 4277} 4278 4279static int8_t 4280run_rssi2dbm(struct run_softc *sc, uint8_t rssi, uint8_t rxchain) 4281{ 4282 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 4283 struct ieee80211_channel *c = ic->ic_curchan; 4284 int delta; 4285 4286 if (IEEE80211_IS_CHAN_5GHZ(c)) { 4287 uint32_t chan = ieee80211_chan2ieee(ic, c); 4288 delta = sc->rssi_5ghz[rxchain]; 4289 4290 /* determine channel group */ 4291 if (chan <= 64) 4292 delta -= sc->lna[1]; 4293 else if (chan <= 128) 4294 delta -= sc->lna[2]; 4295 else 4296 delta -= sc->lna[3]; 4297 } else 4298 delta = sc->rssi_2ghz[rxchain] - sc->lna[0]; 4299 4300 return (-12 - delta - rssi); 4301} 4302 4303static int 4304run_bbp_init(struct run_softc *sc) 4305{ 4306 int i, error, ntries; 4307 uint8_t bbp0; 4308 4309 /* wait for BBP to wake up */ 4310 for (ntries = 0; ntries < 20; ntries++) { 4311 if ((error = run_bbp_read(sc, 0, &bbp0)) != 0) 4312 return error; 4313 if (bbp0 != 0 && bbp0 != 0xff) 4314 break; 4315 } 4316 if (ntries == 20) 4317 return (ETIMEDOUT); 4318 4319 /* initialize BBP registers to default values */ 4320 for (i = 0; i < N(rt2860_def_bbp); i++) { 4321 run_bbp_write(sc, rt2860_def_bbp[i].reg, 4322 rt2860_def_bbp[i].val); 4323 } 4324 4325 /* fix BBP84 for RT2860E */ 4326 if (sc->mac_ver == 0x2860 && sc->mac_rev != 0x0101) 4327 run_bbp_write(sc, 84, 0x19); 4328 4329 if (sc->mac_ver >= 0x3070) { 4330 run_bbp_write(sc, 79, 0x13); 4331 run_bbp_write(sc, 80, 0x05); 4332 run_bbp_write(sc, 81, 0x33); 4333 } else if (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) { 4334 run_bbp_write(sc, 69, 0x16); 4335 run_bbp_write(sc, 73, 0x12); 4336 } 4337 return (0); 4338} 4339 4340static int 4341run_rt3070_rf_init(struct run_softc *sc) 4342{ 4343 uint32_t tmp; 4344 uint8_t rf, target, bbp4; 4345 int i; 4346 4347 run_rt3070_rf_read(sc, 30, &rf); 4348 /* toggle RF R30 bit 7 */ 4349 run_rt3070_rf_write(sc, 30, rf | 0x80); 4350 run_delay(sc, 10); 4351 run_rt3070_rf_write(sc, 30, rf & ~0x80); 4352 4353 /* initialize RF registers to default value */ 4354 if (sc->mac_ver == 0x3572) { 4355 for (i = 0; i < N(rt3572_def_rf); i++) { 4356 run_rt3070_rf_write(sc, rt3572_def_rf[i].reg, 4357 rt3572_def_rf[i].val); 4358 } 4359 } else { 4360 for (i = 0; i < N(rt3070_def_rf); i++) { 4361 run_rt3070_rf_write(sc, rt3070_def_rf[i].reg, 4362 rt3070_def_rf[i].val); 4363 } 4364 } 4365 4366 if (sc->mac_ver == 0x3070) { 4367 /* change voltage from 1.2V to 1.35V for RT3070 */ 4368 run_read(sc, RT3070_LDO_CFG0, &tmp); 4369 tmp = (tmp & ~0x0f000000) | 0x0d000000; 4370 run_write(sc, RT3070_LDO_CFG0, tmp); 4371 4372 } else if (sc->mac_ver == 0x3071) { 4373 run_rt3070_rf_read(sc, 6, &rf); 4374 run_rt3070_rf_write(sc, 6, rf | 0x40); 4375 run_rt3070_rf_write(sc, 31, 0x14); 4376 4377 run_read(sc, RT3070_LDO_CFG0, &tmp); 4378 tmp &= ~0x1f000000; 4379 if (sc->mac_rev < 0x0211) 4380 tmp |= 0x0d000000; /* 1.3V */ 4381 else 4382 tmp |= 0x01000000; /* 1.2V */ 4383 run_write(sc, RT3070_LDO_CFG0, tmp); 4384 4385 /* patch LNA_PE_G1 */ 4386 run_read(sc, RT3070_GPIO_SWITCH, &tmp); 4387 run_write(sc, RT3070_GPIO_SWITCH, tmp & ~0x20); 4388 4389 } else if (sc->mac_ver == 0x3572) { 4390 run_rt3070_rf_read(sc, 6, &rf); 4391 run_rt3070_rf_write(sc, 6, rf | 0x40); 4392 4393 /* increase voltage from 1.2V to 1.35V */ 4394 run_read(sc, RT3070_LDO_CFG0, &tmp); 4395 tmp = (tmp & ~0x1f000000) | 0x0d000000; 4396 run_write(sc, RT3070_LDO_CFG0, tmp); 4397 4398 if (sc->mac_rev < 0x0211 || !sc->patch_dac) { 4399 run_delay(sc, 1); /* wait for 1msec */ 4400 /* decrease voltage back to 1.2V */ 4401 tmp = (tmp & ~0x1f000000) | 0x01000000; 4402 run_write(sc, RT3070_LDO_CFG0, tmp); 4403 } 4404 } 4405 4406 /* select 20MHz bandwidth */ 4407 run_rt3070_rf_read(sc, 31, &rf); 4408 run_rt3070_rf_write(sc, 31, rf & ~0x20); 4409 4410 /* calibrate filter for 20MHz bandwidth */ 4411 sc->rf24_20mhz = 0x1f; /* default value */ 4412 target = (sc->mac_ver < 0x3071) ? 0x16 : 0x13; 4413 run_rt3070_filter_calib(sc, 0x07, target, &sc->rf24_20mhz); 4414 4415 /* select 40MHz bandwidth */ 4416 run_bbp_read(sc, 4, &bbp4); 4417 run_bbp_write(sc, 4, (bbp4 & ~0x08) | 0x10); 4418 run_rt3070_rf_read(sc, 31, &rf); 4419 run_rt3070_rf_write(sc, 31, rf | 0x20); 4420 4421 /* calibrate filter for 40MHz bandwidth */ 4422 sc->rf24_40mhz = 0x2f; /* default value */ 4423 target = (sc->mac_ver < 0x3071) ? 0x19 : 0x15; 4424 run_rt3070_filter_calib(sc, 0x27, target, &sc->rf24_40mhz); 4425 4426 /* go back to 20MHz bandwidth */ 4427 run_bbp_read(sc, 4, &bbp4); 4428 run_bbp_write(sc, 4, bbp4 & ~0x18); 4429 4430 if (sc->mac_ver == 0x3572) { 4431 /* save default BBP registers 25 and 26 values */ 4432 run_bbp_read(sc, 25, &sc->bbp25); 4433 run_bbp_read(sc, 26, &sc->bbp26); 4434 } else if (sc->mac_rev < 0x0211) 4435 run_rt3070_rf_write(sc, 27, 0x03); 4436 4437 run_read(sc, RT3070_OPT_14, &tmp); 4438 run_write(sc, RT3070_OPT_14, tmp | 1); 4439 4440 if (sc->mac_ver == 0x3070 || sc->mac_ver == 0x3071) { 4441 run_rt3070_rf_read(sc, 17, &rf); 4442 rf &= ~RT3070_TX_LO1; 4443 if ((sc->mac_ver == 0x3070 || 4444 (sc->mac_ver == 0x3071 && sc->mac_rev >= 0x0211)) && 4445 !sc->ext_2ghz_lna) 4446 rf |= 0x20; /* fix for long range Rx issue */ 4447 if (sc->txmixgain_2ghz >= 1) 4448 rf = (rf & ~0x7) | sc->txmixgain_2ghz; 4449 run_rt3070_rf_write(sc, 17, rf); 4450 } 4451 4452 if (sc->mac_rev == 0x3071) { 4453 run_rt3070_rf_read(sc, 1, &rf); 4454 rf &= ~(RT3070_RX0_PD | RT3070_TX0_PD); 4455 rf |= RT3070_RF_BLOCK | RT3070_RX1_PD | RT3070_TX1_PD; 4456 run_rt3070_rf_write(sc, 1, rf); 4457 4458 run_rt3070_rf_read(sc, 15, &rf); 4459 run_rt3070_rf_write(sc, 15, rf & ~RT3070_TX_LO2); 4460 4461 run_rt3070_rf_read(sc, 20, &rf); 4462 run_rt3070_rf_write(sc, 20, rf & ~RT3070_RX_LO1); 4463 4464 run_rt3070_rf_read(sc, 21, &rf); 4465 run_rt3070_rf_write(sc, 21, rf & ~RT3070_RX_LO2); 4466 } 4467 4468 if (sc->mac_ver == 0x3070 || sc->mac_ver == 0x3071) { 4469 /* fix Tx to Rx IQ glitch by raising RF voltage */ 4470 run_rt3070_rf_read(sc, 27, &rf); 4471 rf &= ~0x77; 4472 if (sc->mac_rev < 0x0211) 4473 rf |= 0x03; 4474 run_rt3070_rf_write(sc, 27, rf); 4475 } 4476 return (0); 4477} 4478 4479static int 4480run_rt3070_filter_calib(struct run_softc *sc, uint8_t init, uint8_t target, 4481 uint8_t *val) 4482{ 4483 uint8_t rf22, rf24; 4484 uint8_t bbp55_pb, bbp55_sb, delta; 4485 int ntries; 4486 4487 /* program filter */ 4488 run_rt3070_rf_read(sc, 24, &rf24); 4489 rf24 = (rf24 & 0xc0) | init; /* initial filter value */ 4490 run_rt3070_rf_write(sc, 24, rf24); 4491 4492 /* enable baseband loopback mode */ 4493 run_rt3070_rf_read(sc, 22, &rf22); 4494 run_rt3070_rf_write(sc, 22, rf22 | 0x01); 4495 4496 /* set power and frequency of passband test tone */ 4497 run_bbp_write(sc, 24, 0x00); 4498 for (ntries = 0; ntries < 100; ntries++) { 4499 /* transmit test tone */ 4500 run_bbp_write(sc, 25, 0x90); 4501 run_delay(sc, 10); 4502 /* read received power */ 4503 run_bbp_read(sc, 55, &bbp55_pb); 4504 if (bbp55_pb != 0) 4505 break; 4506 } 4507 if (ntries == 100) 4508 return ETIMEDOUT; 4509 4510 /* set power and frequency of stopband test tone */ 4511 run_bbp_write(sc, 24, 0x06); 4512 for (ntries = 0; ntries < 100; ntries++) { 4513 /* transmit test tone */ 4514 run_bbp_write(sc, 25, 0x90); 4515 run_delay(sc, 10); 4516 /* read received power */ 4517 run_bbp_read(sc, 55, &bbp55_sb); 4518 4519 delta = bbp55_pb - bbp55_sb; 4520 if (delta > target) 4521 break; 4522 4523 /* reprogram filter */ 4524 rf24++; 4525 run_rt3070_rf_write(sc, 24, rf24); 4526 } 4527 if (ntries < 100) { 4528 if (rf24 != init) 4529 rf24--; /* backtrack */ 4530 *val = rf24; 4531 run_rt3070_rf_write(sc, 24, rf24); 4532 } 4533 4534 /* restore initial state */ 4535 run_bbp_write(sc, 24, 0x00); 4536 4537 /* disable baseband loopback mode */ 4538 run_rt3070_rf_read(sc, 22, &rf22); 4539 run_rt3070_rf_write(sc, 22, rf22 & ~0x01); 4540 4541 return (0); 4542} 4543 4544static void 4545run_rt3070_rf_setup(struct run_softc *sc) 4546{ 4547 uint8_t bbp, rf; 4548 int i; 4549 4550 if (sc->mac_ver == 0x3572) { 4551 /* enable DC filter */ 4552 if (sc->mac_rev >= 0x0201) 4553 run_bbp_write(sc, 103, 0xc0); 4554 4555 run_bbp_read(sc, 138, &bbp); 4556 if (sc->ntxchains == 1) 4557 bbp |= 0x20; /* turn off DAC1 */ 4558 if (sc->nrxchains == 1) 4559 bbp &= ~0x02; /* turn off ADC1 */ 4560 run_bbp_write(sc, 138, bbp); 4561 4562 if (sc->mac_rev >= 0x0211) { 4563 /* improve power consumption */ 4564 run_bbp_read(sc, 31, &bbp); 4565 run_bbp_write(sc, 31, bbp & ~0x03); 4566 } 4567 4568 run_rt3070_rf_read(sc, 16, &rf); 4569 rf = (rf & ~0x07) | sc->txmixgain_2ghz; 4570 run_rt3070_rf_write(sc, 16, rf); 4571 4572 } else if (sc->mac_ver == 0x3071) { 4573 /* enable DC filter */ 4574 if (sc->mac_rev >= 0x0201) 4575 run_bbp_write(sc, 103, 0xc0); 4576 4577 run_bbp_read(sc, 138, &bbp); 4578 if (sc->ntxchains == 1) 4579 bbp |= 0x20; /* turn off DAC1 */ 4580 if (sc->nrxchains == 1) 4581 bbp &= ~0x02; /* turn off ADC1 */ 4582 run_bbp_write(sc, 138, bbp); 4583 4584 if (sc->mac_rev >= 0x0211) { 4585 /* improve power consumption */ 4586 run_bbp_read(sc, 31, &bbp); 4587 run_bbp_write(sc, 31, bbp & ~0x03); 4588 } 4589 4590 run_write(sc, RT2860_TX_SW_CFG1, 0); 4591 if (sc->mac_rev < 0x0211) { 4592 run_write(sc, RT2860_TX_SW_CFG2, 4593 sc->patch_dac ? 0x2c : 0x0f); 4594 } else 4595 run_write(sc, RT2860_TX_SW_CFG2, 0); 4596 4597 } else if (sc->mac_ver == 0x3070) { 4598 if (sc->mac_rev >= 0x0201) { 4599 /* enable DC filter */ 4600 run_bbp_write(sc, 103, 0xc0); 4601 4602 /* improve power consumption */ 4603 run_bbp_read(sc, 31, &bbp); 4604 run_bbp_write(sc, 31, bbp & ~0x03); 4605 } 4606 4607 if (sc->mac_rev < 0x0211) { 4608 run_write(sc, RT2860_TX_SW_CFG1, 0); 4609 run_write(sc, RT2860_TX_SW_CFG2, 0x2c); 4610 } else 4611 run_write(sc, RT2860_TX_SW_CFG2, 0); 4612 } 4613 4614 /* initialize RF registers from ROM for >=RT3071*/ 4615 if (sc->mac_ver >= 0x3071) { 4616 for (i = 0; i < 10; i++) { 4617 if (sc->rf[i].reg == 0 || sc->rf[i].reg == 0xff) 4618 continue; 4619 run_rt3070_rf_write(sc, sc->rf[i].reg, sc->rf[i].val); 4620 } 4621 } 4622} 4623 4624static int 4625run_txrx_enable(struct run_softc *sc) 4626{ 4627 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 4628 uint32_t tmp; 4629 int error, ntries; 4630 4631 run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN); 4632 for (ntries = 0; ntries < 200; ntries++) { 4633 if ((error = run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp)) != 0) 4634 return error; 4635 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 4636 break; 4637 run_delay(sc, 50); 4638 } 4639 if (ntries == 200) 4640 return ETIMEDOUT; 4641 4642 run_delay(sc, 50); 4643 4644 tmp |= RT2860_RX_DMA_EN | RT2860_TX_DMA_EN | RT2860_TX_WB_DDONE; 4645 run_write(sc, RT2860_WPDMA_GLO_CFG, tmp); 4646 4647 /* enable Rx bulk aggregation (set timeout and limit) */ 4648 tmp = RT2860_USB_TX_EN | RT2860_USB_RX_EN | RT2860_USB_RX_AGG_EN | 4649 RT2860_USB_RX_AGG_TO(128) | RT2860_USB_RX_AGG_LMT(2); 4650 run_write(sc, RT2860_USB_DMA_CFG, tmp); 4651 4652 /* set Rx filter */ 4653 tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR; 4654 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 4655 tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL | 4656 RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK | 4657 RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV | 4658 RT2860_DROP_CFACK | RT2860_DROP_CFEND; 4659 if (ic->ic_opmode == IEEE80211_M_STA) 4660 tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL; 4661 } 4662 run_write(sc, RT2860_RX_FILTR_CFG, tmp); 4663 4664 run_write(sc, RT2860_MAC_SYS_CTRL, 4665 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 4666 4667 return (0); 4668} 4669 4670static void 4671run_init_locked(struct run_softc *sc) 4672{ 4673 struct ifnet *ifp = sc->sc_ifp; 4674 struct ieee80211com *ic = ifp->if_l2com; 4675 uint32_t tmp; 4676 uint8_t bbp1, bbp3; 4677 int i; 4678 int ridx; 4679 int ntries; 4680 4681 if (ic->ic_nrunning > 1) 4682 return; 4683 4684 run_stop(sc); 4685 4686 if (run_load_microcode(sc) != 0) { 4687 device_printf(sc->sc_dev, "could not load 8051 microcode\n"); 4688 goto fail; 4689 } 4690 4691 for (ntries = 0; ntries < 100; ntries++) { 4692 if (run_read(sc, RT2860_ASIC_VER_ID, &tmp) != 0) 4693 goto fail; 4694 if (tmp != 0 && tmp != 0xffffffff) 4695 break; 4696 run_delay(sc, 10); 4697 } 4698 if (ntries == 100) 4699 goto fail; 4700 4701 for (i = 0; i != RUN_EP_QUEUES; i++) 4702 run_setup_tx_list(sc, &sc->sc_epq[i]); 4703 4704 run_set_macaddr(sc, IF_LLADDR(ifp)); 4705 4706 for (ntries = 0; ntries < 100; ntries++) { 4707 if (run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp) != 0) 4708 goto fail; 4709 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 4710 break; 4711 run_delay(sc, 10); 4712 } 4713 if (ntries == 100) { 4714 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n"); 4715 goto fail; 4716 } 4717 tmp &= 0xff0; 4718 tmp |= RT2860_TX_WB_DDONE; 4719 run_write(sc, RT2860_WPDMA_GLO_CFG, tmp); 4720 4721 /* turn off PME_OEN to solve high-current issue */ 4722 run_read(sc, RT2860_SYS_CTRL, &tmp); 4723 run_write(sc, RT2860_SYS_CTRL, tmp & ~RT2860_PME_OEN); 4724 4725 run_write(sc, RT2860_MAC_SYS_CTRL, 4726 RT2860_BBP_HRST | RT2860_MAC_SRST); 4727 run_write(sc, RT2860_USB_DMA_CFG, 0); 4728 4729 if (run_reset(sc) != 0) { 4730 device_printf(sc->sc_dev, "could not reset chipset\n"); 4731 goto fail; 4732 } 4733 4734 run_write(sc, RT2860_MAC_SYS_CTRL, 0); 4735 4736 /* init Tx power for all Tx rates (from EEPROM) */ 4737 for (ridx = 0; ridx < 5; ridx++) { 4738 if (sc->txpow20mhz[ridx] == 0xffffffff) 4739 continue; 4740 run_write(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]); 4741 } 4742 4743 for (i = 0; i < N(rt2870_def_mac); i++) 4744 run_write(sc, rt2870_def_mac[i].reg, rt2870_def_mac[i].val); 4745 run_write(sc, RT2860_WMM_AIFSN_CFG, 0x00002273); 4746 run_write(sc, RT2860_WMM_CWMIN_CFG, 0x00002344); 4747 run_write(sc, RT2860_WMM_CWMAX_CFG, 0x000034aa); 4748 4749 if (sc->mac_ver >= 0x3070) { 4750 /* set delay of PA_PE assertion to 1us (unit of 0.25us) */ 4751 run_write(sc, RT2860_TX_SW_CFG0, 4752 4 << RT2860_DLY_PAPE_EN_SHIFT); 4753 } 4754 4755 /* wait while MAC is busy */ 4756 for (ntries = 0; ntries < 100; ntries++) { 4757 if (run_read(sc, RT2860_MAC_STATUS_REG, &tmp) != 0) 4758 goto fail; 4759 if (!(tmp & (RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY))) 4760 break; 4761 run_delay(sc, 10); 4762 } 4763 if (ntries == 100) 4764 goto fail; 4765 4766 /* clear Host to MCU mailbox */ 4767 run_write(sc, RT2860_H2M_BBPAGENT, 0); 4768 run_write(sc, RT2860_H2M_MAILBOX, 0); 4769 run_delay(sc, 10); 4770 4771 if (run_bbp_init(sc) != 0) { 4772 device_printf(sc->sc_dev, "could not initialize BBP\n"); 4773 goto fail; 4774 } 4775 4776 /* abort TSF synchronization */ 4777 run_read(sc, RT2860_BCN_TIME_CFG, &tmp); 4778 tmp &= ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | 4779 RT2860_TBTT_TIMER_EN); 4780 run_write(sc, RT2860_BCN_TIME_CFG, tmp); 4781 4782 /* clear RX WCID search table */ 4783 run_set_region_4(sc, RT2860_WCID_ENTRY(0), 0, 512); 4784 /* clear WCID attribute table */ 4785 run_set_region_4(sc, RT2860_WCID_ATTR(0), 0, 8 * 32); 4786 4787 /* hostapd sets a key before init. So, don't clear it. */ 4788 if (sc->cmdq_key_set != RUN_CMDQ_GO) { 4789 /* clear shared key table */ 4790 run_set_region_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32); 4791 /* clear shared key mode */ 4792 run_set_region_4(sc, RT2860_SKEY_MODE_0_7, 0, 4); 4793 } 4794 4795 run_read(sc, RT2860_US_CYC_CNT, &tmp); 4796 tmp = (tmp & ~0xff) | 0x1e; 4797 run_write(sc, RT2860_US_CYC_CNT, tmp); 4798 4799 if (sc->mac_rev != 0x0101) 4800 run_write(sc, RT2860_TXOP_CTRL_CFG, 0x0000583f); 4801 4802 run_write(sc, RT2860_WMM_TXOP0_CFG, 0); 4803 run_write(sc, RT2860_WMM_TXOP1_CFG, 48 << 16 | 96); 4804 4805 /* write vendor-specific BBP values (from EEPROM) */ 4806 for (i = 0; i < 10; i++) { 4807 if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff) 4808 continue; 4809 run_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val); 4810 } 4811 4812 /* select Main antenna for 1T1R devices */ 4813 if (sc->rf_rev == RT3070_RF_3020) 4814 run_set_rx_antenna(sc, 0); 4815 4816 /* send LEDs operating mode to microcontroller */ 4817 (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0]); 4818 (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1]); 4819 (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2]); 4820 4821 if (sc->mac_ver >= 0x3070) 4822 run_rt3070_rf_init(sc); 4823 4824 /* disable non-existing Rx chains */ 4825 run_bbp_read(sc, 3, &bbp3); 4826 bbp3 &= ~(1 << 3 | 1 << 4); 4827 if (sc->nrxchains == 2) 4828 bbp3 |= 1 << 3; 4829 else if (sc->nrxchains == 3) 4830 bbp3 |= 1 << 4; 4831 run_bbp_write(sc, 3, bbp3); 4832 4833 /* disable non-existing Tx chains */ 4834 run_bbp_read(sc, 1, &bbp1); 4835 if (sc->ntxchains == 1) 4836 bbp1 &= ~(1 << 3 | 1 << 4); 4837 run_bbp_write(sc, 1, bbp1); 4838 4839 if (sc->mac_ver >= 0x3070) 4840 run_rt3070_rf_setup(sc); 4841 4842 /* select default channel */ 4843 run_set_chan(sc, ic->ic_curchan); 4844 4845 /* setup initial protection mode */ 4846 run_updateprot_cb(ic); 4847 4848 /* turn radio LED on */ 4849 run_set_leds(sc, RT2860_LED_RADIO); 4850 4851 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 4852 ifp->if_drv_flags |= IFF_DRV_RUNNING; 4853 sc->cmdq_run = RUN_CMDQ_GO; 4854 4855 for (i = 0; i != RUN_N_XFER; i++) 4856 usbd_xfer_set_stall(sc->sc_xfer[i]); 4857 4858 usbd_transfer_start(sc->sc_xfer[RUN_BULK_RX]); 4859 4860 if (run_txrx_enable(sc) != 0) 4861 goto fail; 4862 4863 return; 4864 4865fail: 4866 run_stop(sc); 4867} 4868 4869static void 4870run_init(void *arg) 4871{ 4872 struct run_softc *sc = arg; 4873 struct ifnet *ifp = sc->sc_ifp; 4874 struct ieee80211com *ic = ifp->if_l2com; 4875 4876 RUN_LOCK(sc); 4877 run_init_locked(sc); 4878 RUN_UNLOCK(sc); 4879 4880 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 4881 ieee80211_start_all(ic); 4882} 4883 4884static void 4885run_stop(void *arg) 4886{ 4887 struct run_softc *sc = (struct run_softc *)arg; 4888 struct ifnet *ifp = sc->sc_ifp; 4889 uint32_t tmp; 4890 int i; 4891 int ntries; 4892 4893 RUN_LOCK_ASSERT(sc, MA_OWNED); 4894 4895 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 4896 run_set_leds(sc, 0); /* turn all LEDs off */ 4897 4898 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 4899 4900 sc->ratectl_run = RUN_RATECTL_OFF; 4901 sc->cmdq_run = sc->cmdq_key_set; 4902 4903 RUN_UNLOCK(sc); 4904 4905 for(i = 0; i < RUN_N_XFER; i++) 4906 usbd_transfer_drain(sc->sc_xfer[i]); 4907 4908 RUN_LOCK(sc); 4909 4910 if (sc->rx_m != NULL) { 4911 m_free(sc->rx_m); 4912 sc->rx_m = NULL; 4913 } 4914 4915 /* disable Tx/Rx */ 4916 run_read(sc, RT2860_MAC_SYS_CTRL, &tmp); 4917 tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 4918 run_write(sc, RT2860_MAC_SYS_CTRL, tmp); 4919 4920 /* wait for pending Tx to complete */ 4921 for (ntries = 0; ntries < 100; ntries++) { 4922 if (run_read(sc, RT2860_TXRXQ_PCNT, &tmp) != 0) { 4923 DPRINTF("Cannot read Tx queue count\n"); 4924 break; 4925 } 4926 if ((tmp & RT2860_TX2Q_PCNT_MASK) == 0) { 4927 DPRINTF("All Tx cleared\n"); 4928 break; 4929 } 4930 run_delay(sc, 10); 4931 } 4932 if (ntries >= 100) 4933 DPRINTF("There are still pending Tx\n"); 4934 run_delay(sc, 10); 4935 run_write(sc, RT2860_USB_DMA_CFG, 0); 4936 4937 run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST); 4938 run_write(sc, RT2860_MAC_SYS_CTRL, 0); 4939 4940 for (i = 0; i != RUN_EP_QUEUES; i++) 4941 run_unsetup_tx_list(sc, &sc->sc_epq[i]); 4942 4943 return; 4944} 4945 4946static void 4947run_delay(struct run_softc *sc, unsigned int ms) 4948{ 4949 usb_pause_mtx(mtx_owned(&sc->sc_mtx) ? 4950 &sc->sc_mtx : NULL, USB_MS_TO_TICKS(ms)); 4951} 4952 4953static device_method_t run_methods[] = { 4954 /* Device interface */ 4955 DEVMETHOD(device_probe, run_match), 4956 DEVMETHOD(device_attach, run_attach), 4957 DEVMETHOD(device_detach, run_detach), 4958 4959 { 0, 0 } 4960}; 4961 4962static driver_t run_driver = { 4963 .name = "run", 4964 .methods = run_methods, 4965 .size = sizeof(struct run_softc) 4966}; 4967 4968static devclass_t run_devclass; 4969 4970DRIVER_MODULE(run, uhub, run_driver, run_devclass, NULL, 0); 4971MODULE_DEPEND(run, wlan, 1, 1, 1); 4972MODULE_DEPEND(run, usb, 1, 1, 1); 4973MODULE_DEPEND(run, firmware, 1, 1, 1); 4974MODULE_VERSION(run, 1); 4975