xhci_pci.c revision 275439
1/*- 2 * Copyright (c) 2010 Hans Petter Selasky. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 16 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 17 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23 * SUCH DAMAGE. 24 */ 25 26#include <sys/cdefs.h> 27__FBSDID("$FreeBSD: stable/10/sys/dev/usb/controller/xhci_pci.c 275439 2014-12-03 06:53:49Z mav $"); 28 29#include <sys/stdint.h> 30#include <sys/stddef.h> 31#include <sys/param.h> 32#include <sys/queue.h> 33#include <sys/types.h> 34#include <sys/systm.h> 35#include <sys/kernel.h> 36#include <sys/bus.h> 37#include <sys/module.h> 38#include <sys/lock.h> 39#include <sys/mutex.h> 40#include <sys/condvar.h> 41#include <sys/sysctl.h> 42#include <sys/sx.h> 43#include <sys/unistd.h> 44#include <sys/callout.h> 45#include <sys/malloc.h> 46#include <sys/priv.h> 47 48#include <dev/usb/usb.h> 49#include <dev/usb/usbdi.h> 50 51#include <dev/usb/usb_core.h> 52#include <dev/usb/usb_busdma.h> 53#include <dev/usb/usb_process.h> 54#include <dev/usb/usb_util.h> 55 56#include <dev/usb/usb_controller.h> 57#include <dev/usb/usb_bus.h> 58#include <dev/usb/usb_pci.h> 59#include <dev/usb/controller/xhci.h> 60#include <dev/usb/controller/xhcireg.h> 61#include "usb_if.h" 62 63static device_probe_t xhci_pci_probe; 64static device_attach_t xhci_pci_attach; 65static device_detach_t xhci_pci_detach; 66static usb_take_controller_t xhci_pci_take_controller; 67 68static device_method_t xhci_device_methods[] = { 69 /* device interface */ 70 DEVMETHOD(device_probe, xhci_pci_probe), 71 DEVMETHOD(device_attach, xhci_pci_attach), 72 DEVMETHOD(device_detach, xhci_pci_detach), 73 DEVMETHOD(device_suspend, bus_generic_suspend), 74 DEVMETHOD(device_resume, bus_generic_resume), 75 DEVMETHOD(device_shutdown, bus_generic_shutdown), 76 DEVMETHOD(usb_take_controller, xhci_pci_take_controller), 77 78 DEVMETHOD_END 79}; 80 81static driver_t xhci_driver = { 82 .name = "xhci", 83 .methods = xhci_device_methods, 84 .size = sizeof(struct xhci_softc), 85}; 86 87static devclass_t xhci_devclass; 88 89DRIVER_MODULE(xhci, pci, xhci_driver, xhci_devclass, 0, 0); 90MODULE_DEPEND(xhci, usb, 1, 1, 1); 91 92 93static const char * 94xhci_pci_match(device_t self) 95{ 96 uint32_t device_id = pci_get_devid(self); 97 98 switch (device_id) { 99 case 0x01941033: 100 return ("NEC uPD720200 USB 3.0 controller"); 101 102 case 0x10421b21: 103 return ("ASMedia ASM1042 USB 3.0 controller"); 104 105 case 0x9c318086: 106 case 0x1e318086: 107 return ("Intel Panther Point USB 3.0 controller"); 108 case 0x8c318086: 109 return ("Intel Lynx Point USB 3.0 controller"); 110 case 0x8cb18086: 111 return ("Intel Wildcat Point USB 3.0 controller"); 112 113 default: 114 break; 115 } 116 117 if ((pci_get_class(self) == PCIC_SERIALBUS) 118 && (pci_get_subclass(self) == PCIS_SERIALBUS_USB) 119 && (pci_get_progif(self) == PCIP_SERIALBUS_USB_XHCI)) { 120 return ("XHCI (generic) USB 3.0 controller"); 121 } 122 return (NULL); /* dunno */ 123} 124 125static int 126xhci_pci_probe(device_t self) 127{ 128 const char *desc = xhci_pci_match(self); 129 130 if (desc) { 131 device_set_desc(self, desc); 132 return (0); 133 } else { 134 return (ENXIO); 135 } 136} 137 138static int xhci_use_msi = 1; 139TUNABLE_INT("hw.usb.xhci.msi", &xhci_use_msi); 140 141static void 142xhci_interrupt_poll(void *_sc) 143{ 144 struct xhci_softc *sc = _sc; 145 USB_BUS_UNLOCK(&sc->sc_bus); 146 xhci_interrupt(sc); 147 USB_BUS_LOCK(&sc->sc_bus); 148 usb_callout_reset(&sc->sc_callout, 1, (void *)&xhci_interrupt_poll, sc); 149} 150 151static int 152xhci_pci_port_route(device_t self, uint32_t set, uint32_t clear) 153{ 154 uint32_t temp; 155 uint32_t usb3_mask; 156 uint32_t usb2_mask; 157 158 temp = pci_read_config(self, PCI_XHCI_INTEL_USB3_PSSEN, 4) | 159 pci_read_config(self, PCI_XHCI_INTEL_XUSB2PR, 4); 160 161 temp |= set; 162 temp &= ~clear; 163 164 /* Don't set bits which the hardware doesn't support */ 165 usb3_mask = pci_read_config(self, PCI_XHCI_INTEL_USB3PRM, 4); 166 usb2_mask = pci_read_config(self, PCI_XHCI_INTEL_USB2PRM, 4); 167 168 pci_write_config(self, PCI_XHCI_INTEL_USB3_PSSEN, temp & usb3_mask, 4); 169 pci_write_config(self, PCI_XHCI_INTEL_XUSB2PR, temp & usb2_mask, 4); 170 171 device_printf(self, "Port routing mask set to 0x%08x\n", temp); 172 173 return (0); 174} 175 176static int 177xhci_pci_attach(device_t self) 178{ 179 struct xhci_softc *sc = device_get_softc(self); 180 int count, err, rid; 181 182 /* XXX check for 64-bit capability */ 183 184 if (xhci_init(sc, self)) { 185 device_printf(self, "Could not initialize softc\n"); 186 goto error; 187 } 188 189 pci_enable_busmaster(self); 190 191 rid = PCI_XHCI_CBMEM; 192 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 193 RF_ACTIVE); 194 if (!sc->sc_io_res) { 195 device_printf(self, "Could not map memory\n"); 196 goto error; 197 } 198 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 199 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 200 sc->sc_io_size = rman_get_size(sc->sc_io_res); 201 202 usb_callout_init_mtx(&sc->sc_callout, &sc->sc_bus.bus_mtx, 0); 203 204 sc->sc_irq_rid = 0; 205 if (xhci_use_msi) { 206 count = pci_msi_count(self); 207 if (count >= 1) { 208 count = 1; 209 if (pci_alloc_msi(self, &count) == 0) { 210 if (bootverbose) 211 device_printf(self, "MSI enabled\n"); 212 sc->sc_irq_rid = 1; 213 } 214 } 215 } 216 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, 217 &sc->sc_irq_rid, RF_SHAREABLE | RF_ACTIVE); 218 if (sc->sc_irq_res == NULL) { 219 device_printf(self, "Could not allocate IRQ\n"); 220 /* goto error; FALLTHROUGH - use polling */ 221 } 222 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 223 if (sc->sc_bus.bdev == NULL) { 224 device_printf(self, "Could not add USB device\n"); 225 goto error; 226 } 227 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 228 229 sprintf(sc->sc_vendor, "0x%04x", pci_get_vendor(self)); 230 231 if (sc->sc_irq_res != NULL) { 232 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 233 NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl); 234 if (err != 0) { 235 device_printf(self, "Could not setup IRQ, err=%d\n", err); 236 sc->sc_intr_hdl = NULL; 237 } 238 } 239 if (sc->sc_irq_res == NULL || sc->sc_intr_hdl == NULL || 240 xhci_use_polling() != 0) { 241 device_printf(self, "Interrupt polling at %dHz\n", hz); 242 USB_BUS_LOCK(&sc->sc_bus); 243 xhci_interrupt_poll(sc); 244 USB_BUS_UNLOCK(&sc->sc_bus); 245 } 246 247 /* On Intel chipsets reroute ports from EHCI to XHCI controller. */ 248 switch (pci_get_devid(self)) { 249 case 0x9c318086: /* Panther Point */ 250 case 0x1e318086: /* Panther Point */ 251 case 0x8c318086: /* Lynx Point */ 252 sc->sc_port_route = &xhci_pci_port_route; 253 sc->sc_imod_default = XHCI_IMOD_DEFAULT_LP; 254 break; 255 default: 256 break; 257 } 258 259 xhci_pci_take_controller(self); 260 261 err = xhci_halt_controller(sc); 262 263 if (err == 0) 264 err = xhci_start_controller(sc); 265 266 if (err == 0) 267 err = device_probe_and_attach(sc->sc_bus.bdev); 268 269 if (err) { 270 device_printf(self, "XHCI halt/start/probe failed err=%d\n", err); 271 goto error; 272 } 273 return (0); 274 275error: 276 xhci_pci_detach(self); 277 return (ENXIO); 278} 279 280static int 281xhci_pci_detach(device_t self) 282{ 283 struct xhci_softc *sc = device_get_softc(self); 284 device_t bdev; 285 286 if (sc->sc_bus.bdev != NULL) { 287 bdev = sc->sc_bus.bdev; 288 device_detach(bdev); 289 device_delete_child(self, bdev); 290 } 291 /* during module unload there are lots of children leftover */ 292 device_delete_children(self); 293 294 if (sc->sc_io_res) { 295 usb_callout_drain(&sc->sc_callout); 296 xhci_halt_controller(sc); 297 } 298 299 pci_disable_busmaster(self); 300 301 if (sc->sc_irq_res && sc->sc_intr_hdl) { 302 bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 303 sc->sc_intr_hdl = NULL; 304 } 305 if (sc->sc_irq_res) { 306 if (sc->sc_irq_rid == 1) 307 pci_release_msi(self); 308 bus_release_resource(self, SYS_RES_IRQ, sc->sc_irq_rid, 309 sc->sc_irq_res); 310 sc->sc_irq_res = NULL; 311 } 312 if (sc->sc_io_res) { 313 bus_release_resource(self, SYS_RES_MEMORY, PCI_XHCI_CBMEM, 314 sc->sc_io_res); 315 sc->sc_io_res = NULL; 316 } 317 318 xhci_uninit(sc); 319 320 return (0); 321} 322 323static int 324xhci_pci_take_controller(device_t self) 325{ 326 struct xhci_softc *sc = device_get_softc(self); 327 uint32_t cparams; 328 uint32_t eecp; 329 uint32_t eec; 330 uint16_t to; 331 uint8_t bios_sem; 332 333 cparams = XREAD4(sc, capa, XHCI_HCSPARAMS0); 334 335 eec = -1; 336 337 /* Synchronise with the BIOS if it owns the controller. */ 338 for (eecp = XHCI_HCS0_XECP(cparams) << 2; eecp != 0 && XHCI_XECP_NEXT(eec); 339 eecp += XHCI_XECP_NEXT(eec) << 2) { 340 eec = XREAD4(sc, capa, eecp); 341 342 if (XHCI_XECP_ID(eec) != XHCI_ID_USB_LEGACY) 343 continue; 344 bios_sem = XREAD1(sc, capa, eecp + 345 XHCI_XECP_BIOS_SEM); 346 if (bios_sem == 0) 347 continue; 348 device_printf(sc->sc_bus.bdev, "waiting for BIOS " 349 "to give up control\n"); 350 XWRITE1(sc, capa, eecp + 351 XHCI_XECP_OS_SEM, 1); 352 to = 500; 353 while (1) { 354 bios_sem = XREAD1(sc, capa, eecp + 355 XHCI_XECP_BIOS_SEM); 356 if (bios_sem == 0) 357 break; 358 359 if (--to == 0) { 360 device_printf(sc->sc_bus.bdev, 361 "timed out waiting for BIOS\n"); 362 break; 363 } 364 usb_pause_mtx(NULL, hz / 100); /* wait 10ms */ 365 } 366 } 367 return (0); 368} 369