ehci_pci.c revision 198151
1/*- 2 * Copyright (c) 1998 The NetBSD Foundation, Inc. 3 * All rights reserved. 4 * 5 * This code is derived from software contributed to The NetBSD Foundation 6 * by Lennart Augustsson (augustss@carlstedt.se) at 7 * Carlstedt Research & Technology. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by the NetBSD 20 * Foundation, Inc. and its contributors. 21 * 4. Neither the name of The NetBSD Foundation nor the names of its 22 * contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 26 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38#include <sys/cdefs.h> 39__FBSDID("$FreeBSD: head/sys/dev/usb/controller/ehci_pci.c 198151 2009-10-15 20:07:08Z thompsa $"); 40 41/* 42 * USB Enhanced Host Controller Driver, a.k.a. USB 2.0 controller. 43 * 44 * The EHCI 1.0 spec can be found at 45 * http://developer.intel.com/technology/usb/download/ehci-r10.pdf 46 * and the USB 2.0 spec at 47 * http://www.usb.org/developers/docs/usb_20.zip 48 */ 49 50/* The low level controller code for EHCI has been split into 51 * PCI probes and EHCI specific code. This was done to facilitate the 52 * sharing of code between *BSD's 53 */ 54 55#include <sys/stdint.h> 56#include <sys/stddef.h> 57#include <sys/param.h> 58#include <sys/queue.h> 59#include <sys/types.h> 60#include <sys/systm.h> 61#include <sys/kernel.h> 62#include <sys/bus.h> 63#include <sys/linker_set.h> 64#include <sys/module.h> 65#include <sys/lock.h> 66#include <sys/mutex.h> 67#include <sys/condvar.h> 68#include <sys/sysctl.h> 69#include <sys/sx.h> 70#include <sys/unistd.h> 71#include <sys/callout.h> 72#include <sys/malloc.h> 73#include <sys/priv.h> 74 75#include <dev/usb/usb.h> 76#include <dev/usb/usbdi.h> 77 78#include <dev/usb/usb_core.h> 79#include <dev/usb/usb_busdma.h> 80#include <dev/usb/usb_process.h> 81#include <dev/usb/usb_util.h> 82 83#include <dev/usb/usb_controller.h> 84#include <dev/usb/usb_bus.h> 85#include <dev/usb/usb_pci.h> 86#include <dev/usb/controller/ehci.h> 87#include <dev/usb/controller/ehcireg.h> 88 89#define PCI_EHCI_VENDORID_ACERLABS 0x10b9 90#define PCI_EHCI_VENDORID_AMD 0x1022 91#define PCI_EHCI_VENDORID_APPLE 0x106b 92#define PCI_EHCI_VENDORID_ATI 0x1002 93#define PCI_EHCI_VENDORID_CMDTECH 0x1095 94#define PCI_EHCI_VENDORID_INTEL 0x8086 95#define PCI_EHCI_VENDORID_NEC 0x1033 96#define PCI_EHCI_VENDORID_OPTI 0x1045 97#define PCI_EHCI_VENDORID_PHILIPS 0x1131 98#define PCI_EHCI_VENDORID_SIS 0x1039 99#define PCI_EHCI_VENDORID_NVIDIA 0x12D2 100#define PCI_EHCI_VENDORID_NVIDIA2 0x10DE 101#define PCI_EHCI_VENDORID_VIA 0x1106 102 103#define PCI_EHCI_BASE_REG 0x10 104 105static void ehci_pci_takecontroller(device_t self); 106 107static device_probe_t ehci_pci_probe; 108static device_attach_t ehci_pci_attach; 109static device_detach_t ehci_pci_detach; 110static device_suspend_t ehci_pci_suspend; 111static device_resume_t ehci_pci_resume; 112static device_shutdown_t ehci_pci_shutdown; 113 114static int 115ehci_pci_suspend(device_t self) 116{ 117 ehci_softc_t *sc = device_get_softc(self); 118 int err; 119 120 err = bus_generic_suspend(self); 121 if (err) 122 return (err); 123 ehci_suspend(sc); 124 return (0); 125} 126 127static int 128ehci_pci_resume(device_t self) 129{ 130 ehci_softc_t *sc = device_get_softc(self); 131 132 ehci_pci_takecontroller(self); 133 ehci_resume(sc); 134 135 bus_generic_resume(self); 136 137 return (0); 138} 139 140static int 141ehci_pci_shutdown(device_t self) 142{ 143 ehci_softc_t *sc = device_get_softc(self); 144 int err; 145 146 err = bus_generic_shutdown(self); 147 if (err) 148 return (err); 149 ehci_shutdown(sc); 150 151 return (0); 152} 153 154static const char * 155ehci_pci_match(device_t self) 156{ 157 uint32_t device_id = pci_get_devid(self); 158 159 switch (device_id) { 160 case 0x268c8086: 161 return ("Intel 63XXESB USB 2.0 controller"); 162 163 case 0x523910b9: 164 return "ALi M5239 USB 2.0 controller"; 165 166 case 0x10227463: 167 return "AMD 8111 USB 2.0 controller"; 168 169 case 0x20951022: 170 return ("AMD CS5536 (Geode) USB 2.0 controller"); 171 172 case 0x43451002: 173 return "ATI SB200 USB 2.0 controller"; 174 case 0x43731002: 175 return "ATI SB400 USB 2.0 controller"; 176 177 case 0x25ad8086: 178 return "Intel 6300ESB USB 2.0 controller"; 179 case 0x24cd8086: 180 return "Intel 82801DB/L/M (ICH4) USB 2.0 controller"; 181 case 0x24dd8086: 182 return "Intel 82801EB/R (ICH5) USB 2.0 controller"; 183 case 0x265c8086: 184 return "Intel 82801FB (ICH6) USB 2.0 controller"; 185 case 0x27cc8086: 186 return "Intel 82801GB/R (ICH7) USB 2.0 controller"; 187 188 case 0x28368086: 189 return "Intel 82801H (ICH8) USB 2.0 controller USB2-A"; 190 case 0x283a8086: 191 return "Intel 82801H (ICH8) USB 2.0 controller USB2-B"; 192 case 0x293a8086: 193 return "Intel 82801I (ICH9) USB 2.0 controller"; 194 case 0x293c8086: 195 return "Intel 82801I (ICH9) USB 2.0 controller"; 196 197 case 0x00e01033: 198 return ("NEC uPD 720100 USB 2.0 controller"); 199 200 case 0x006810de: 201 return "NVIDIA nForce2 USB 2.0 controller"; 202 case 0x008810de: 203 return "NVIDIA nForce2 Ultra 400 USB 2.0 controller"; 204 case 0x00d810de: 205 return "NVIDIA nForce3 USB 2.0 controller"; 206 case 0x00e810de: 207 return "NVIDIA nForce3 250 USB 2.0 controller"; 208 case 0x005b10de: 209 return "NVIDIA nForce4 USB 2.0 controller"; 210 case 0x03f210de: 211 return "NVIDIA nForce MCP61 USB 2.0 controller"; 212 213 case 0x15621131: 214 return "Philips ISP156x USB 2.0 controller"; 215 216 case 0x31041106: 217 return ("VIA VT6202 USB 2.0 controller"); 218 219 default: 220 break; 221 } 222 223 if ((pci_get_class(self) == PCIC_SERIALBUS) 224 && (pci_get_subclass(self) == PCIS_SERIALBUS_USB) 225 && (pci_get_progif(self) == PCI_INTERFACE_EHCI)) { 226 return ("EHCI (generic) USB 2.0 controller"); 227 } 228 return (NULL); /* dunno */ 229} 230 231static int 232ehci_pci_probe(device_t self) 233{ 234 const char *desc = ehci_pci_match(self); 235 236 if (desc) { 237 device_set_desc(self, desc); 238 return (0); 239 } else { 240 return (ENXIO); 241 } 242} 243 244static void 245ehci_pci_ati_quirk(device_t self, uint8_t is_sb700) 246{ 247 device_t smbdev; 248 uint32_t val; 249 250 if (is_sb700) { 251 /* Lookup SMBUS PCI device */ 252 smbdev = pci_find_device(PCI_EHCI_VENDORID_ATI, 0x4385); 253 if (smbdev == NULL) 254 return; 255 val = pci_get_revid(smbdev); 256 if (val != 0x3a && val != 0x3b) 257 return; 258 } 259 260 /* 261 * Note: this bit is described as reserved in SB700 262 * Register Reference Guide. 263 */ 264 val = pci_read_config(self, 0x53, 1); 265 if (!(val & 0x8)) { 266 val |= 0x8; 267 pci_write_config(self, 0x53, val, 1); 268 device_printf(self, "AMD SB600/700 quirk applied\n"); 269 } 270} 271 272static void 273ehci_pci_via_quirk(device_t self) 274{ 275 uint32_t val; 276 277 if ((pci_get_device(self) == 0x3104) && 278 ((pci_get_revid(self) & 0xf0) == 0x60)) { 279 /* Correct schedule sleep time to 10us */ 280 val = pci_read_config(self, 0x4b, 1); 281 if (val & 0x20) 282 return; 283 pci_write_config(self, 0x4b, val, 1); 284 device_printf(self, "VIA-quirk applied\n"); 285 } 286} 287 288static int 289ehci_pci_attach(device_t self) 290{ 291 ehci_softc_t *sc = device_get_softc(self); 292 int err; 293 int rid; 294 295 /* initialise some bus fields */ 296 sc->sc_bus.parent = self; 297 sc->sc_bus.devices = sc->sc_devices; 298 sc->sc_bus.devices_max = EHCI_MAX_DEVICES; 299 300 /* get all DMA memory */ 301 if (usb_bus_mem_alloc_all(&sc->sc_bus, 302 USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) { 303 return (ENOMEM); 304 } 305 306 pci_enable_busmaster(self); 307 308 switch (pci_read_config(self, PCI_USBREV, 1) & PCI_USB_REV_MASK) { 309 case PCI_USB_REV_PRE_1_0: 310 case PCI_USB_REV_1_0: 311 case PCI_USB_REV_1_1: 312 /* 313 * NOTE: some EHCI USB controllers have the wrong USB 314 * revision number. It appears those controllers are 315 * fully compliant so we just ignore this value in 316 * some common cases. 317 */ 318 device_printf(self, "pre-2.0 USB revision (ignored)\n"); 319 /* fallthrough */ 320 case PCI_USB_REV_2_0: 321 sc->sc_bus.usbrev = USB_REV_2_0; 322 break; 323 default: 324 /* Quirk for Parallels Desktop 4.0 */ 325 device_printf(self, "USB revision is unknown. Assuming v2.0.\n"); 326 sc->sc_bus.usbrev = USB_REV_2_0; 327 break; 328 } 329 330 rid = PCI_CBMEM; 331 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 332 RF_ACTIVE); 333 if (!sc->sc_io_res) { 334 device_printf(self, "Could not map memory\n"); 335 goto error; 336 } 337 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 338 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 339 sc->sc_io_size = rman_get_size(sc->sc_io_res); 340 341 rid = 0; 342 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, 343 RF_SHAREABLE | RF_ACTIVE); 344 if (sc->sc_irq_res == NULL) { 345 device_printf(self, "Could not allocate irq\n"); 346 goto error; 347 } 348 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 349 if (!sc->sc_bus.bdev) { 350 device_printf(self, "Could not add USB device\n"); 351 goto error; 352 } 353 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 354 355 /* 356 * ehci_pci_match will never return NULL if ehci_pci_probe 357 * succeeded 358 */ 359 device_set_desc(sc->sc_bus.bdev, ehci_pci_match(self)); 360 switch (pci_get_vendor(self)) { 361 case PCI_EHCI_VENDORID_ACERLABS: 362 sprintf(sc->sc_vendor, "AcerLabs"); 363 break; 364 case PCI_EHCI_VENDORID_AMD: 365 sprintf(sc->sc_vendor, "AMD"); 366 break; 367 case PCI_EHCI_VENDORID_APPLE: 368 sprintf(sc->sc_vendor, "Apple"); 369 break; 370 case PCI_EHCI_VENDORID_ATI: 371 sprintf(sc->sc_vendor, "ATI"); 372 break; 373 case PCI_EHCI_VENDORID_CMDTECH: 374 sprintf(sc->sc_vendor, "CMDTECH"); 375 break; 376 case PCI_EHCI_VENDORID_INTEL: 377 sprintf(sc->sc_vendor, "Intel"); 378 break; 379 case PCI_EHCI_VENDORID_NEC: 380 sprintf(sc->sc_vendor, "NEC"); 381 break; 382 case PCI_EHCI_VENDORID_OPTI: 383 sprintf(sc->sc_vendor, "OPTi"); 384 break; 385 case PCI_EHCI_VENDORID_PHILIPS: 386 sprintf(sc->sc_vendor, "Philips"); 387 break; 388 case PCI_EHCI_VENDORID_SIS: 389 sprintf(sc->sc_vendor, "SiS"); 390 break; 391 case PCI_EHCI_VENDORID_NVIDIA: 392 case PCI_EHCI_VENDORID_NVIDIA2: 393 sprintf(sc->sc_vendor, "nVidia"); 394 break; 395 case PCI_EHCI_VENDORID_VIA: 396 sprintf(sc->sc_vendor, "VIA"); 397 break; 398 default: 399 if (bootverbose) 400 device_printf(self, "(New EHCI DeviceId=0x%08x)\n", 401 pci_get_devid(self)); 402 sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); 403 } 404 405#if (__FreeBSD_version >= 700031) 406 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 407 NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl); 408#else 409 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 410 (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl); 411#endif 412 if (err) { 413 device_printf(self, "Could not setup irq, %d\n", err); 414 sc->sc_intr_hdl = NULL; 415 goto error; 416 } 417 ehci_pci_takecontroller(self); 418 419 /* Undocumented quirks taken from Linux */ 420 421 switch (pci_get_vendor(self)) { 422 case PCI_EHCI_VENDORID_ATI: 423 /* SB600 and SB700 EHCI quirk */ 424 switch (pci_get_device(self)) { 425 case 0x4386: 426 ehci_pci_ati_quirk(self, 0); 427 break; 428 case 0x4396: 429 ehci_pci_ati_quirk(self, 1); 430 break; 431 default: 432 break; 433 } 434 break; 435 436 case PCI_EHCI_VENDORID_VIA: 437 ehci_pci_via_quirk(self); 438 break; 439 440 default: 441 break; 442 } 443 444 err = ehci_init(sc); 445 if (!err) { 446 err = device_probe_and_attach(sc->sc_bus.bdev); 447 } 448 if (err) { 449 device_printf(self, "USB init failed err=%d\n", err); 450 goto error; 451 } 452 return (0); 453 454error: 455 ehci_pci_detach(self); 456 return (ENXIO); 457} 458 459static int 460ehci_pci_detach(device_t self) 461{ 462 ehci_softc_t *sc = device_get_softc(self); 463 device_t bdev; 464 465 if (sc->sc_bus.bdev) { 466 bdev = sc->sc_bus.bdev; 467 device_detach(bdev); 468 device_delete_child(self, bdev); 469 } 470 /* during module unload there are lots of children leftover */ 471 device_delete_all_children(self); 472 473 pci_disable_busmaster(self); 474 475 /* 476 * disable interrupts that might have been switched on in ehci_init 477 */ 478 if (sc->sc_io_res) { 479 EWRITE4(sc, EHCI_USBINTR, 0); 480 } 481 if (sc->sc_irq_res && sc->sc_intr_hdl) { 482 /* 483 * only call ehci_detach() after ehci_init() 484 */ 485 ehci_detach(sc); 486 487 int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 488 489 if (err) 490 /* XXX or should we panic? */ 491 device_printf(self, "Could not tear down irq, %d\n", 492 err); 493 sc->sc_intr_hdl = NULL; 494 } 495 if (sc->sc_irq_res) { 496 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); 497 sc->sc_irq_res = NULL; 498 } 499 if (sc->sc_io_res) { 500 bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, 501 sc->sc_io_res); 502 sc->sc_io_res = NULL; 503 } 504 usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc); 505 506 return (0); 507} 508 509static void 510ehci_pci_takecontroller(device_t self) 511{ 512 ehci_softc_t *sc = device_get_softc(self); 513 uint32_t cparams; 514 uint32_t eec; 515 uint16_t to; 516 uint8_t eecp; 517 uint8_t bios_sem; 518 519 cparams = EREAD4(sc, EHCI_HCCPARAMS); 520 521 /* Synchronise with the BIOS if it owns the controller. */ 522 for (eecp = EHCI_HCC_EECP(cparams); eecp != 0; 523 eecp = EHCI_EECP_NEXT(eec)) { 524 eec = pci_read_config(self, eecp, 4); 525 if (EHCI_EECP_ID(eec) != EHCI_EC_LEGSUP) { 526 continue; 527 } 528 bios_sem = pci_read_config(self, eecp + 529 EHCI_LEGSUP_BIOS_SEM, 1); 530 if (bios_sem == 0) { 531 continue; 532 } 533 device_printf(sc->sc_bus.bdev, "waiting for BIOS " 534 "to give up control\n"); 535 pci_write_config(self, eecp + 536 EHCI_LEGSUP_OS_SEM, 1, 1); 537 to = 500; 538 while (1) { 539 bios_sem = pci_read_config(self, eecp + 540 EHCI_LEGSUP_BIOS_SEM, 1); 541 if (bios_sem == 0) 542 break; 543 544 if (--to == 0) { 545 device_printf(sc->sc_bus.bdev, 546 "timed out waiting for BIOS\n"); 547 break; 548 } 549 usb_pause_mtx(NULL, hz / 100); /* wait 10ms */ 550 } 551 } 552} 553 554static driver_t ehci_driver = 555{ 556 .name = "ehci", 557 .methods = (device_method_t[]){ 558 /* device interface */ 559 DEVMETHOD(device_probe, ehci_pci_probe), 560 DEVMETHOD(device_attach, ehci_pci_attach), 561 DEVMETHOD(device_detach, ehci_pci_detach), 562 DEVMETHOD(device_suspend, ehci_pci_suspend), 563 DEVMETHOD(device_resume, ehci_pci_resume), 564 DEVMETHOD(device_shutdown, ehci_pci_shutdown), 565 /* bus interface */ 566 DEVMETHOD(bus_print_child, bus_generic_print_child), 567 568 {0, 0} 569 }, 570 .size = sizeof(struct ehci_softc), 571}; 572 573static devclass_t ehci_devclass; 574 575DRIVER_MODULE(ehci, pci, ehci_driver, ehci_devclass, 0, 0); 576MODULE_DEPEND(ehci, usb, 1, 1, 1); 577