ehci_pci.c revision 194228
1/*- 2 * Copyright (c) 1998 The NetBSD Foundation, Inc. 3 * All rights reserved. 4 * 5 * This code is derived from software contributed to The NetBSD Foundation 6 * by Lennart Augustsson (augustss@carlstedt.se) at 7 * Carlstedt Research & Technology. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by the NetBSD 20 * Foundation, Inc. and its contributors. 21 * 4. Neither the name of The NetBSD Foundation nor the names of its 22 * contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 26 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38#include <sys/cdefs.h> 39__FBSDID("$FreeBSD: head/sys/dev/usb/controller/ehci_pci.c 194228 2009-06-15 01:02:43Z thompsa $"); 40 41/* 42 * USB Enhanced Host Controller Driver, a.k.a. USB 2.0 controller. 43 * 44 * The EHCI 1.0 spec can be found at 45 * http://developer.intel.com/technology/usb/download/ehci-r10.pdf 46 * and the USB 2.0 spec at 47 * http://www.usb.org/developers/docs/usb_20.zip 48 */ 49 50/* The low level controller code for EHCI has been split into 51 * PCI probes and EHCI specific code. This was done to facilitate the 52 * sharing of code between *BSD's 53 */ 54 55#include <dev/usb/usb_mfunc.h> 56#include <dev/usb/usb.h> 57 58#include <dev/usb/usb_core.h> 59#include <dev/usb/usb_busdma.h> 60#include <dev/usb/usb_process.h> 61#include <dev/usb/usb_util.h> 62 63#include <dev/usb/usb_controller.h> 64#include <dev/usb/usb_bus.h> 65#include <dev/usb/usb_pci.h> 66#include <dev/usb/controller/ehci.h> 67 68#define PCI_EHCI_VENDORID_ACERLABS 0x10b9 69#define PCI_EHCI_VENDORID_AMD 0x1022 70#define PCI_EHCI_VENDORID_APPLE 0x106b 71#define PCI_EHCI_VENDORID_ATI 0x1002 72#define PCI_EHCI_VENDORID_CMDTECH 0x1095 73#define PCI_EHCI_VENDORID_INTEL 0x8086 74#define PCI_EHCI_VENDORID_NEC 0x1033 75#define PCI_EHCI_VENDORID_OPTI 0x1045 76#define PCI_EHCI_VENDORID_PHILIPS 0x1131 77#define PCI_EHCI_VENDORID_SIS 0x1039 78#define PCI_EHCI_VENDORID_NVIDIA 0x12D2 79#define PCI_EHCI_VENDORID_NVIDIA2 0x10DE 80#define PCI_EHCI_VENDORID_VIA 0x1106 81 82#define PCI_EHCI_BASE_REG 0x10 83 84static void ehci_pci_takecontroller(device_t self); 85 86static device_probe_t ehci_pci_probe; 87static device_attach_t ehci_pci_attach; 88static device_detach_t ehci_pci_detach; 89static device_suspend_t ehci_pci_suspend; 90static device_resume_t ehci_pci_resume; 91static device_shutdown_t ehci_pci_shutdown; 92 93static int 94ehci_pci_suspend(device_t self) 95{ 96 ehci_softc_t *sc = device_get_softc(self); 97 int err; 98 99 err = bus_generic_suspend(self); 100 if (err) 101 return (err); 102 ehci_suspend(sc); 103 return (0); 104} 105 106static int 107ehci_pci_resume(device_t self) 108{ 109 ehci_softc_t *sc = device_get_softc(self); 110 111 ehci_pci_takecontroller(self); 112 ehci_resume(sc); 113 114 bus_generic_resume(self); 115 116 return (0); 117} 118 119static int 120ehci_pci_shutdown(device_t self) 121{ 122 ehci_softc_t *sc = device_get_softc(self); 123 int err; 124 125 err = bus_generic_shutdown(self); 126 if (err) 127 return (err); 128 ehci_shutdown(sc); 129 130 return (0); 131} 132 133static const char * 134ehci_pci_match(device_t self) 135{ 136 uint32_t device_id = pci_get_devid(self); 137 138 switch (device_id) { 139 case 0x268c8086: 140 return ("Intel 63XXESB USB 2.0 controller"); 141 142 case 0x523910b9: 143 return "ALi M5239 USB 2.0 controller"; 144 145 case 0x10227463: 146 return "AMD 8111 USB 2.0 controller"; 147 148 case 0x20951022: 149 return ("AMD CS5536 (Geode) USB 2.0 controller"); 150 151 case 0x43451002: 152 return "ATI SB200 USB 2.0 controller"; 153 case 0x43731002: 154 return "ATI SB400 USB 2.0 controller"; 155 156 case 0x25ad8086: 157 return "Intel 6300ESB USB 2.0 controller"; 158 case 0x24cd8086: 159 return "Intel 82801DB/L/M (ICH4) USB 2.0 controller"; 160 case 0x24dd8086: 161 return "Intel 82801EB/R (ICH5) USB 2.0 controller"; 162 case 0x265c8086: 163 return "Intel 82801FB (ICH6) USB 2.0 controller"; 164 case 0x27cc8086: 165 return "Intel 82801GB/R (ICH7) USB 2.0 controller"; 166 167 case 0x28368086: 168 return "Intel 82801H (ICH8) USB 2.0 controller USB2-A"; 169 case 0x283a8086: 170 return "Intel 82801H (ICH8) USB 2.0 controller USB2-B"; 171 case 0x293a8086: 172 return "Intel 82801I (ICH9) USB 2.0 controller"; 173 case 0x293c8086: 174 return "Intel 82801I (ICH9) USB 2.0 controller"; 175 176 case 0x00e01033: 177 return ("NEC uPD 720100 USB 2.0 controller"); 178 179 case 0x006810de: 180 return "NVIDIA nForce2 USB 2.0 controller"; 181 case 0x008810de: 182 return "NVIDIA nForce2 Ultra 400 USB 2.0 controller"; 183 case 0x00d810de: 184 return "NVIDIA nForce3 USB 2.0 controller"; 185 case 0x00e810de: 186 return "NVIDIA nForce3 250 USB 2.0 controller"; 187 case 0x005b10de: 188 return "NVIDIA nForce4 USB 2.0 controller"; 189 190 case 0x15621131: 191 return "Philips ISP156x USB 2.0 controller"; 192 193 case 0x31041106: 194 return ("VIA VT6202 USB 2.0 controller"); 195 196 default: 197 break; 198 } 199 200 if ((pci_get_class(self) == PCIC_SERIALBUS) 201 && (pci_get_subclass(self) == PCIS_SERIALBUS_USB) 202 && (pci_get_progif(self) == PCI_INTERFACE_EHCI)) { 203 return ("EHCI (generic) USB 2.0 controller"); 204 } 205 return (NULL); /* dunno */ 206} 207 208static int 209ehci_pci_probe(device_t self) 210{ 211 const char *desc = ehci_pci_match(self); 212 213 if (desc) { 214 device_set_desc(self, desc); 215 return (0); 216 } else { 217 return (ENXIO); 218 } 219} 220 221static int 222ehci_pci_attach(device_t self) 223{ 224 ehci_softc_t *sc = device_get_softc(self); 225 int err; 226 int rid; 227 228 /* initialise some bus fields */ 229 sc->sc_bus.parent = self; 230 sc->sc_bus.devices = sc->sc_devices; 231 sc->sc_bus.devices_max = EHCI_MAX_DEVICES; 232 233 /* get all DMA memory */ 234 if (usb_bus_mem_alloc_all(&sc->sc_bus, 235 USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) { 236 return (ENOMEM); 237 } 238 239 pci_enable_busmaster(self); 240 241 switch (pci_read_config(self, PCI_USBREV, 1) & PCI_USB_REV_MASK) { 242 case PCI_USB_REV_PRE_1_0: 243 case PCI_USB_REV_1_0: 244 case PCI_USB_REV_1_1: 245 /* 246 * NOTE: some EHCI USB controllers have the wrong USB 247 * revision number. It appears those controllers are 248 * fully compliant so we just ignore this value in 249 * some common cases. 250 */ 251 device_printf(self, "pre-2.0 USB revision (ignored)\n"); 252 /* fallthrough */ 253 case PCI_USB_REV_2_0: 254 sc->sc_bus.usbrev = USB_REV_2_0; 255 break; 256 default: 257 /* Quirk for Parallels Desktop 4.0 */ 258 device_printf(self, "USB revision is unknown. Assuming v2.0.\n"); 259 sc->sc_bus.usbrev = USB_REV_2_0; 260 break; 261 } 262 263 rid = PCI_CBMEM; 264 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 265 RF_ACTIVE); 266 if (!sc->sc_io_res) { 267 device_printf(self, "Could not map memory\n"); 268 goto error; 269 } 270 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 271 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 272 sc->sc_io_size = rman_get_size(sc->sc_io_res); 273 274 rid = 0; 275 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, 276 RF_SHAREABLE | RF_ACTIVE); 277 if (sc->sc_irq_res == NULL) { 278 device_printf(self, "Could not allocate irq\n"); 279 goto error; 280 } 281 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 282 if (!sc->sc_bus.bdev) { 283 device_printf(self, "Could not add USB device\n"); 284 goto error; 285 } 286 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 287 288 /* 289 * ehci_pci_match will never return NULL if ehci_pci_probe 290 * succeeded 291 */ 292 device_set_desc(sc->sc_bus.bdev, ehci_pci_match(self)); 293 switch (pci_get_vendor(self)) { 294 case PCI_EHCI_VENDORID_ACERLABS: 295 sprintf(sc->sc_vendor, "AcerLabs"); 296 break; 297 case PCI_EHCI_VENDORID_AMD: 298 sprintf(sc->sc_vendor, "AMD"); 299 break; 300 case PCI_EHCI_VENDORID_APPLE: 301 sprintf(sc->sc_vendor, "Apple"); 302 break; 303 case PCI_EHCI_VENDORID_ATI: 304 sprintf(sc->sc_vendor, "ATI"); 305 break; 306 case PCI_EHCI_VENDORID_CMDTECH: 307 sprintf(sc->sc_vendor, "CMDTECH"); 308 break; 309 case PCI_EHCI_VENDORID_INTEL: 310 sprintf(sc->sc_vendor, "Intel"); 311 break; 312 case PCI_EHCI_VENDORID_NEC: 313 sprintf(sc->sc_vendor, "NEC"); 314 break; 315 case PCI_EHCI_VENDORID_OPTI: 316 sprintf(sc->sc_vendor, "OPTi"); 317 break; 318 case PCI_EHCI_VENDORID_PHILIPS: 319 sprintf(sc->sc_vendor, "Philips"); 320 break; 321 case PCI_EHCI_VENDORID_SIS: 322 sprintf(sc->sc_vendor, "SiS"); 323 break; 324 case PCI_EHCI_VENDORID_NVIDIA: 325 case PCI_EHCI_VENDORID_NVIDIA2: 326 sprintf(sc->sc_vendor, "nVidia"); 327 break; 328 case PCI_EHCI_VENDORID_VIA: 329 sprintf(sc->sc_vendor, "VIA"); 330 break; 331 default: 332 if (bootverbose) 333 device_printf(self, "(New EHCI DeviceId=0x%08x)\n", 334 pci_get_devid(self)); 335 sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); 336 } 337 338#if (__FreeBSD_version >= 700031) 339 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 340 NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl); 341#else 342 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 343 (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl); 344#endif 345 if (err) { 346 device_printf(self, "Could not setup irq, %d\n", err); 347 sc->sc_intr_hdl = NULL; 348 goto error; 349 } 350 ehci_pci_takecontroller(self); 351 err = ehci_init(sc); 352 if (!err) { 353 err = device_probe_and_attach(sc->sc_bus.bdev); 354 } 355 if (err) { 356 device_printf(self, "USB init failed err=%d\n", err); 357 goto error; 358 } 359 return (0); 360 361error: 362 ehci_pci_detach(self); 363 return (ENXIO); 364} 365 366static int 367ehci_pci_detach(device_t self) 368{ 369 ehci_softc_t *sc = device_get_softc(self); 370 device_t bdev; 371 372 if (sc->sc_bus.bdev) { 373 bdev = sc->sc_bus.bdev; 374 device_detach(bdev); 375 device_delete_child(self, bdev); 376 } 377 /* during module unload there are lots of children leftover */ 378 device_delete_all_children(self); 379 380 pci_disable_busmaster(self); 381 382 /* 383 * disable interrupts that might have been switched on in ehci_init 384 */ 385 if (sc->sc_io_res) { 386 EWRITE4(sc, EHCI_USBINTR, 0); 387 } 388 if (sc->sc_irq_res && sc->sc_intr_hdl) { 389 /* 390 * only call ehci_detach() after ehci_init() 391 */ 392 ehci_detach(sc); 393 394 int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 395 396 if (err) 397 /* XXX or should we panic? */ 398 device_printf(self, "Could not tear down irq, %d\n", 399 err); 400 sc->sc_intr_hdl = NULL; 401 } 402 if (sc->sc_irq_res) { 403 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); 404 sc->sc_irq_res = NULL; 405 } 406 if (sc->sc_io_res) { 407 bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, 408 sc->sc_io_res); 409 sc->sc_io_res = NULL; 410 } 411 usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc); 412 413 return (0); 414} 415 416static void 417ehci_pci_takecontroller(device_t self) 418{ 419 ehci_softc_t *sc = device_get_softc(self); 420 uint32_t cparams; 421 uint32_t eec; 422 uint16_t to; 423 uint8_t eecp; 424 uint8_t bios_sem; 425 426 cparams = EREAD4(sc, EHCI_HCCPARAMS); 427 428 /* Synchronise with the BIOS if it owns the controller. */ 429 for (eecp = EHCI_HCC_EECP(cparams); eecp != 0; 430 eecp = EHCI_EECP_NEXT(eec)) { 431 eec = pci_read_config(self, eecp, 4); 432 if (EHCI_EECP_ID(eec) != EHCI_EC_LEGSUP) { 433 continue; 434 } 435 bios_sem = pci_read_config(self, eecp + 436 EHCI_LEGSUP_BIOS_SEM, 1); 437 if (bios_sem == 0) { 438 continue; 439 } 440 device_printf(sc->sc_bus.bdev, "waiting for BIOS " 441 "to give up control\n"); 442 pci_write_config(self, eecp + 443 EHCI_LEGSUP_OS_SEM, 1, 1); 444 to = 500; 445 while (1) { 446 bios_sem = pci_read_config(self, eecp + 447 EHCI_LEGSUP_BIOS_SEM, 1); 448 if (bios_sem == 0) 449 break; 450 451 if (--to == 0) { 452 device_printf(sc->sc_bus.bdev, 453 "timed out waiting for BIOS\n"); 454 break; 455 } 456 usb_pause_mtx(NULL, hz / 100); /* wait 10ms */ 457 } 458 } 459} 460 461static driver_t ehci_driver = 462{ 463 .name = "ehci", 464 .methods = (device_method_t[]){ 465 /* device interface */ 466 DEVMETHOD(device_probe, ehci_pci_probe), 467 DEVMETHOD(device_attach, ehci_pci_attach), 468 DEVMETHOD(device_detach, ehci_pci_detach), 469 DEVMETHOD(device_suspend, ehci_pci_suspend), 470 DEVMETHOD(device_resume, ehci_pci_resume), 471 DEVMETHOD(device_shutdown, ehci_pci_shutdown), 472 /* bus interface */ 473 DEVMETHOD(bus_print_child, bus_generic_print_child), 474 475 {0, 0} 476 }, 477 .size = sizeof(struct ehci_softc), 478}; 479 480static devclass_t ehci_devclass; 481 482DRIVER_MODULE(ehci, pci, ehci_driver, ehci_devclass, 0, 0); 483MODULE_DEPEND(ehci, usb, 1, 1, 1); 484