sioreg.h revision 103881
1/*- 2 * Copyright (c) 1991 The Regents of the University of California. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by the University of 16 * California, Berkeley and its contributors. 17 * 4. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * from: @(#)comreg.h 7.2 (Berkeley) 5/9/91 34 * $FreeBSD: head/sys/dev/sio/sioreg.h 103881 2002-09-24 02:35:57Z nyan $ 35 */ 36 37/* Receiver clock frequency for "standard" pc serial ports. */ 38#define DEFAULT_RCLK 1843200 39 40/* interrupt enable register */ 41#define IER_ERXRDY 0x1 42#define IER_ETXRDY 0x2 43#define IER_ERLS 0x4 44#define IER_EMSC 0x8 45 46/* interrupt identification register */ 47#define IIR_IMASK 0xf 48#define IIR_RXTOUT 0xc 49#define IIR_RLS 0x6 50#define IIR_RXRDY 0x4 51#define IIR_TXRDY 0x2 52#define IIR_NOPEND 0x1 53#define IIR_MLSC 0x0 54#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */ 55 56/* fifo control register */ 57#define FIFO_ENABLE 0x01 58#define FIFO_RCV_RST 0x02 59#define FIFO_XMT_RST 0x04 60#define FIFO_DMA_MODE 0x08 61#define FIFO_RX_LOW 0x00 62#define FIFO_RX_MEDL 0x40 63#define FIFO_RX_MEDH 0x80 64#define FIFO_RX_HIGH 0xc0 65 66/* character format control register */ 67#define CFCR_DLAB 0x80 68#define CFCR_SBREAK 0x40 69#define CFCR_PZERO 0x30 70#define CFCR_PONE 0x20 71#define CFCR_PEVEN 0x10 72#define CFCR_PODD 0x00 73#define CFCR_PENAB 0x08 74#define CFCR_STOPB 0x04 75#define CFCR_8BITS 0x03 76#define CFCR_7BITS 0x02 77#define CFCR_6BITS 0x01 78#define CFCR_5BITS 0x00 79 80/* modem control register */ 81#define MCR_LOOPBACK 0x10 82#define MCR_IENABLE 0x08 83#define MCR_DRS 0x04 84#define MCR_RTS 0x02 85#define MCR_DTR 0x01 86 87/* line status register */ 88#define LSR_RCV_FIFO 0x80 89#define LSR_TSRE 0x40 90#define LSR_TXRDY 0x20 91#define LSR_BI 0x10 92#define LSR_FE 0x08 93#define LSR_PE 0x04 94#define LSR_OE 0x02 95#define LSR_RXRDY 0x01 96#define LSR_RCV_MASK 0x1f 97 98/* modem status register */ 99#define MSR_DCD 0x80 100#define MSR_RI 0x40 101#define MSR_DSR 0x20 102#define MSR_CTS 0x10 103#define MSR_DDCD 0x08 104#define MSR_TERI 0x04 105#define MSR_DDSR 0x02 106#define MSR_DCTS 0x01 107 108#ifdef PC98 109/* Hardware extension mode register for RSB-2000/3000. */ 110#define com_emr com_msr 111#define EMR_EXBUFF 0x04 112#define EMR_CTSFLW 0x08 113#define EMR_DSRFLW 0x10 114#define EMR_RTSFLW 0x20 115#define EMR_DTRFLW 0x40 116#define EMR_EFMODE 0x80 117#endif 118 119/* speed to initialize to during chip tests */ 120#define SIO_TEST_SPEED 9600 121 122/* default serial console speed if not set with sysctl or probed from boot */ 123#ifndef CONSPEED 124#define CONSPEED 9600 125#endif 126 127/* default serial gdb speed if not set with sysctl or probed from boot */ 128#ifndef GDBSPEED 129#define GDBSPEED CONSPEED 130#endif 131 132#define IO_COMSIZE 8 /* 8250, 16x50 com controllers */ 133