pucdata.c revision 222328
1/*- 2 * Copyright (c) 2006 Marcel Moolenaar 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27#include <sys/cdefs.h> 28__FBSDID("$FreeBSD: head/sys/dev/puc/pucdata.c 222328 2011-05-26 20:54:45Z jhb $"); 29 30/* 31 * PCI "universal" communications card driver configuration data (used to 32 * match/attach the cards). 33 */ 34 35#include <sys/param.h> 36#include <sys/systm.h> 37#include <sys/kernel.h> 38#include <sys/bus.h> 39 40#include <machine/resource.h> 41#include <machine/bus.h> 42#include <sys/rman.h> 43 44#include <dev/pci/pcivar.h> 45 46#include <dev/puc/puc_bus.h> 47#include <dev/puc/puc_cfg.h> 48#include <dev/puc/puc_bfe.h> 49 50static puc_config_f puc_config_amc; 51static puc_config_f puc_config_cronyx; 52static puc_config_f puc_config_diva; 53static puc_config_f puc_config_icbook; 54static puc_config_f puc_config_quatech; 55static puc_config_f puc_config_syba; 56static puc_config_f puc_config_siig; 57static puc_config_f puc_config_timedia; 58static puc_config_f puc_config_titan; 59static puc_config_f puc_config_oxford_pcie; 60 61const struct puc_cfg puc_pci_devices[] = { 62 63 { 0x0009, 0x7168, 0xffff, 0, 64 "Sunix SUN1889", 65 DEFAULT_RCLK * 8, 66 PUC_PORT_2S, 0x10, 0, 8, 67 }, 68 69 { 0x103c, 0x1048, 0x103c, 0x1049, 70 "HP Diva Serial [GSP] Multiport UART - Tosca Console", 71 DEFAULT_RCLK, 72 PUC_PORT_3S, 0x10, 0, -1, 73 .config_function = puc_config_diva 74 }, 75 76 { 0x103c, 0x1048, 0x103c, 0x104a, 77 "HP Diva Serial [GSP] Multiport UART - Tosca Secondary", 78 DEFAULT_RCLK, 79 PUC_PORT_2S, 0x10, 0, -1, 80 .config_function = puc_config_diva 81 }, 82 83 { 0x103c, 0x1048, 0x103c, 0x104b, 84 "HP Diva Serial [GSP] Multiport UART - Maestro SP2", 85 DEFAULT_RCLK, 86 PUC_PORT_4S, 0x10, 0, -1, 87 .config_function = puc_config_diva 88 }, 89 90 { 0x103c, 0x1048, 0x103c, 0x1223, 91 "HP Diva Serial [GSP] Multiport UART - Superdome Console", 92 DEFAULT_RCLK, 93 PUC_PORT_3S, 0x10, 0, -1, 94 .config_function = puc_config_diva 95 }, 96 97 { 0x103c, 0x1048, 0x103c, 0x1226, 98 "HP Diva Serial [GSP] Multiport UART - Keystone SP2", 99 DEFAULT_RCLK, 100 PUC_PORT_3S, 0x10, 0, -1, 101 .config_function = puc_config_diva 102 }, 103 104 { 0x103c, 0x1048, 0x103c, 0x1282, 105 "HP Diva Serial [GSP] Multiport UART - Everest SP2", 106 DEFAULT_RCLK, 107 PUC_PORT_3S, 0x10, 0, -1, 108 .config_function = puc_config_diva 109 }, 110 111 { 0x10b5, 0x1076, 0x10b5, 0x1076, 112 "VScom PCI-800", 113 DEFAULT_RCLK * 8, 114 PUC_PORT_8S, 0x18, 0, 8, 115 }, 116 117 { 0x10b5, 0x1077, 0x10b5, 0x1077, 118 "VScom PCI-400", 119 DEFAULT_RCLK * 8, 120 PUC_PORT_4S, 0x18, 0, 8, 121 }, 122 123 { 0x10b5, 0x1103, 0x10b5, 0x1103, 124 "VScom PCI-200", 125 DEFAULT_RCLK * 8, 126 PUC_PORT_2S, 0x18, 4, 0, 127 }, 128 129 /* 130 * Boca Research Turbo Serial 658 (8 serial port) card. 131 * Appears to be the same as Chase Research PLC PCI-FAST8 132 * and Perle PCI-FAST8 Multi-Port serial cards. 133 */ 134 { 0x10b5, 0x9050, 0x12e0, 0x0021, 135 "Boca Research Turbo Serial 658", 136 DEFAULT_RCLK * 4, 137 PUC_PORT_8S, 0x18, 0, 8, 138 }, 139 140 { 0x10b5, 0x9050, 0x12e0, 0x0031, 141 "Boca Research Turbo Serial 654", 142 DEFAULT_RCLK * 4, 143 PUC_PORT_4S, 0x18, 0, 8, 144 }, 145 146 /* 147 * Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with 148 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 149 * into the subsystem fields, and claims that it's a 150 * network/misc (0x02/0x80) device. 151 */ 152 { 0x10b5, 0x9050, 0xd84d, 0x6808, 153 "Dolphin Peripherals 4035", 154 DEFAULT_RCLK, 155 PUC_PORT_2S, 0x18, 4, 0, 156 }, 157 158 /* 159 * Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with 160 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 161 * into the subsystem fields, and claims that it's a 162 * network/misc (0x02/0x80) device. 163 */ 164 { 0x10b5, 0x9050, 0xd84d, 0x6810, 165 "Dolphin Peripherals 4014", 166 0, 167 PUC_PORT_2P, 0x20, 4, 0, 168 }, 169 170 { 0x10e8, 0x818e, 0xffff, 0, 171 "Applied Micro Circuits 8 Port UART", 172 DEFAULT_RCLK, 173 PUC_PORT_8S, 0x14, -1, -1, 174 .config_function = puc_config_amc 175 }, 176 177 { 0x11fe, 0x8010, 0xffff, 0, 178 "Comtrol RocketPort 550/8 RJ11 part A", 179 DEFAULT_RCLK * 4, 180 PUC_PORT_4S, 0x10, 0, 8, 181 }, 182 183 { 0x11fe, 0x8011, 0xffff, 0, 184 "Comtrol RocketPort 550/8 RJ11 part B", 185 DEFAULT_RCLK * 4, 186 PUC_PORT_4S, 0x10, 0, 8, 187 }, 188 189 { 0x11fe, 0x8012, 0xffff, 0, 190 "Comtrol RocketPort 550/8 Octa part A", 191 DEFAULT_RCLK * 4, 192 PUC_PORT_4S, 0x10, 0, 8, 193 }, 194 195 { 0x11fe, 0x8013, 0xffff, 0, 196 "Comtrol RocketPort 550/8 Octa part B", 197 DEFAULT_RCLK * 4, 198 PUC_PORT_4S, 0x10, 0, 8, 199 }, 200 201 { 0x11fe, 0x8014, 0xffff, 0, 202 "Comtrol RocketPort 550/4 RJ45", 203 DEFAULT_RCLK * 4, 204 PUC_PORT_4S, 0x10, 0, 8, 205 }, 206 207 { 0x11fe, 0x8015, 0xffff, 0, 208 "Comtrol RocketPort 550/Quad", 209 DEFAULT_RCLK * 4, 210 PUC_PORT_4S, 0x10, 0, 8, 211 }, 212 213 { 0x11fe, 0x8016, 0xffff, 0, 214 "Comtrol RocketPort 550/16 part A", 215 DEFAULT_RCLK * 4, 216 PUC_PORT_4S, 0x10, 0, 8, 217 }, 218 219 { 0x11fe, 0x8017, 0xffff, 0, 220 "Comtrol RocketPort 550/16 part B", 221 DEFAULT_RCLK * 4, 222 PUC_PORT_12S, 0x10, 0, 8, 223 }, 224 225 { 0x11fe, 0x8018, 0xffff, 0, 226 "Comtrol RocketPort 550/8 part A", 227 DEFAULT_RCLK * 4, 228 PUC_PORT_4S, 0x10, 0, 8, 229 }, 230 231 { 0x11fe, 0x8019, 0xffff, 0, 232 "Comtrol RocketPort 550/8 part B", 233 DEFAULT_RCLK * 4, 234 PUC_PORT_4S, 0x10, 0, 8, 235 }, 236 237 /* 238 * IBM SurePOS 300 Series (481033H) serial ports 239 * Details can be found on the IBM RSS websites 240 */ 241 242 { 0x1014, 0x0297, 0xffff, 0, 243 "IBM SurePOS 300 Series (481033H) serial ports", 244 DEFAULT_RCLK, 245 PUC_PORT_4S, 0x10, 4, 0 246 }, 247 248 /* 249 * SIIG Boards. 250 * 251 * SIIG provides documentation for their boards at: 252 * <URL:http://www.siig.com/downloads.asp> 253 */ 254 255 { 0x131f, 0x1010, 0xffff, 0, 256 "SIIG Cyber I/O PCI 16C550 (10x family)", 257 DEFAULT_RCLK, 258 PUC_PORT_1S1P, 0x18, 4, 0, 259 }, 260 261 { 0x131f, 0x1011, 0xffff, 0, 262 "SIIG Cyber I/O PCI 16C650 (10x family)", 263 DEFAULT_RCLK, 264 PUC_PORT_1S1P, 0x18, 4, 0, 265 }, 266 267 { 0x131f, 0x1012, 0xffff, 0, 268 "SIIG Cyber I/O PCI 16C850 (10x family)", 269 DEFAULT_RCLK, 270 PUC_PORT_1S1P, 0x18, 4, 0, 271 }, 272 273 { 0x131f, 0x1021, 0xffff, 0, 274 "SIIG Cyber Parallel Dual PCI (10x family)", 275 0, 276 PUC_PORT_2P, 0x18, 8, 0, 277 }, 278 279 { 0x131f, 0x1030, 0xffff, 0, 280 "SIIG Cyber Serial Dual PCI 16C550 (10x family)", 281 DEFAULT_RCLK, 282 PUC_PORT_2S, 0x18, 4, 0, 283 }, 284 285 { 0x131f, 0x1031, 0xffff, 0, 286 "SIIG Cyber Serial Dual PCI 16C650 (10x family)", 287 DEFAULT_RCLK, 288 PUC_PORT_2S, 0x18, 4, 0, 289 }, 290 291 { 0x131f, 0x1032, 0xffff, 0, 292 "SIIG Cyber Serial Dual PCI 16C850 (10x family)", 293 DEFAULT_RCLK, 294 PUC_PORT_2S, 0x18, 4, 0, 295 }, 296 297 { 0x131f, 0x1034, 0xffff, 0, /* XXX really? */ 298 "SIIG Cyber 2S1P PCI 16C550 (10x family)", 299 DEFAULT_RCLK, 300 PUC_PORT_2S1P, 0x18, 4, 0, 301 }, 302 303 { 0x131f, 0x1035, 0xffff, 0, /* XXX really? */ 304 "SIIG Cyber 2S1P PCI 16C650 (10x family)", 305 DEFAULT_RCLK, 306 PUC_PORT_2S1P, 0x18, 4, 0, 307 }, 308 309 { 0x131f, 0x1036, 0xffff, 0, /* XXX really? */ 310 "SIIG Cyber 2S1P PCI 16C850 (10x family)", 311 DEFAULT_RCLK, 312 PUC_PORT_2S1P, 0x18, 4, 0, 313 }, 314 315 { 0x131f, 0x1050, 0xffff, 0, 316 "SIIG Cyber 4S PCI 16C550 (10x family)", 317 DEFAULT_RCLK, 318 PUC_PORT_4S, 0x18, 4, 0, 319 }, 320 321 { 0x131f, 0x1051, 0xffff, 0, 322 "SIIG Cyber 4S PCI 16C650 (10x family)", 323 DEFAULT_RCLK, 324 PUC_PORT_4S, 0x18, 4, 0, 325 }, 326 327 { 0x131f, 0x1052, 0xffff, 0, 328 "SIIG Cyber 4S PCI 16C850 (10x family)", 329 DEFAULT_RCLK, 330 PUC_PORT_4S, 0x18, 4, 0, 331 }, 332 333 { 0x131f, 0x2010, 0xffff, 0, 334 "SIIG Cyber I/O PCI 16C550 (20x family)", 335 DEFAULT_RCLK, 336 PUC_PORT_1S1P, 0x10, 4, 0, 337 }, 338 339 { 0x131f, 0x2011, 0xffff, 0, 340 "SIIG Cyber I/O PCI 16C650 (20x family)", 341 DEFAULT_RCLK, 342 PUC_PORT_1S1P, 0x10, 4, 0, 343 }, 344 345 { 0x131f, 0x2012, 0xffff, 0, 346 "SIIG Cyber I/O PCI 16C850 (20x family)", 347 DEFAULT_RCLK, 348 PUC_PORT_1S1P, 0x10, 4, 0, 349 }, 350 351 { 0x131f, 0x2021, 0xffff, 0, 352 "SIIG Cyber Parallel Dual PCI (20x family)", 353 0, 354 PUC_PORT_2P, 0x10, 8, 0, 355 }, 356 357 { 0x131f, 0x2030, 0xffff, 0, 358 "SIIG Cyber Serial Dual PCI 16C550 (20x family)", 359 DEFAULT_RCLK, 360 PUC_PORT_2S, 0x10, 4, 0, 361 }, 362 363 { 0x131f, 0x2031, 0xffff, 0, 364 "SIIG Cyber Serial Dual PCI 16C650 (20x family)", 365 DEFAULT_RCLK, 366 PUC_PORT_2S, 0x10, 4, 0, 367 }, 368 369 { 0x131f, 0x2032, 0xffff, 0, 370 "SIIG Cyber Serial Dual PCI 16C850 (20x family)", 371 DEFAULT_RCLK, 372 PUC_PORT_2S, 0x10, 4, 0, 373 }, 374 375 { 0x131f, 0x2040, 0xffff, 0, 376 "SIIG Cyber 2P1S PCI 16C550 (20x family)", 377 DEFAULT_RCLK, 378 PUC_PORT_1S2P, 0x10, -1, 0, 379 .config_function = puc_config_siig 380 }, 381 382 { 0x131f, 0x2041, 0xffff, 0, 383 "SIIG Cyber 2P1S PCI 16C650 (20x family)", 384 DEFAULT_RCLK, 385 PUC_PORT_1S2P, 0x10, -1, 0, 386 .config_function = puc_config_siig 387 }, 388 389 { 0x131f, 0x2042, 0xffff, 0, 390 "SIIG Cyber 2P1S PCI 16C850 (20x family)", 391 DEFAULT_RCLK, 392 PUC_PORT_1S2P, 0x10, -1, 0, 393 .config_function = puc_config_siig 394 }, 395 396 { 0x131f, 0x2050, 0xffff, 0, 397 "SIIG Cyber 4S PCI 16C550 (20x family)", 398 DEFAULT_RCLK, 399 PUC_PORT_4S, 0x10, 4, 0, 400 }, 401 402 { 0x131f, 0x2051, 0xffff, 0, 403 "SIIG Cyber 4S PCI 16C650 (20x family)", 404 DEFAULT_RCLK, 405 PUC_PORT_4S, 0x10, 4, 0, 406 }, 407 408 { 0x131f, 0x2052, 0xffff, 0, 409 "SIIG Cyber 4S PCI 16C850 (20x family)", 410 DEFAULT_RCLK, 411 PUC_PORT_4S, 0x10, 4, 0, 412 }, 413 414 { 0x131f, 0x2060, 0xffff, 0, 415 "SIIG Cyber 2S1P PCI 16C550 (20x family)", 416 DEFAULT_RCLK, 417 PUC_PORT_2S1P, 0x10, 4, 0, 418 }, 419 420 { 0x131f, 0x2061, 0xffff, 0, 421 "SIIG Cyber 2S1P PCI 16C650 (20x family)", 422 DEFAULT_RCLK, 423 PUC_PORT_2S1P, 0x10, 4, 0, 424 }, 425 426 { 0x131f, 0x2062, 0xffff, 0, 427 "SIIG Cyber 2S1P PCI 16C850 (20x family)", 428 DEFAULT_RCLK, 429 PUC_PORT_2S1P, 0x10, 4, 0, 430 }, 431 432 { 0x131f, 0x2081, 0xffff, 0, 433 "SIIG PS8000 8S PCI 16C650 (20x family)", 434 DEFAULT_RCLK, 435 PUC_PORT_8S, 0x10, -1, -1, 436 .config_function = puc_config_siig 437 }, 438 439 { 0x135c, 0x0010, 0xffff, 0, 440 "Quatech QSC-100", 441 -3, /* max 8x clock rate */ 442 PUC_PORT_4S, 0x14, 0, 8, 443 .config_function = puc_config_quatech 444 }, 445 446 { 0x135c, 0x0020, 0xffff, 0, 447 "Quatech DSC-100", 448 -1, /* max 2x clock rate */ 449 PUC_PORT_2S, 0x14, 0, 8, 450 .config_function = puc_config_quatech 451 }, 452 453 { 0x135c, 0x0030, 0xffff, 0, 454 "Quatech DSC-200/300", 455 -1, /* max 2x clock rate */ 456 PUC_PORT_2S, 0x14, 0, 8, 457 .config_function = puc_config_quatech 458 }, 459 460 { 0x135c, 0x0040, 0xffff, 0, 461 "Quatech QSC-200/300", 462 -3, /* max 8x clock rate */ 463 PUC_PORT_4S, 0x14, 0, 8, 464 .config_function = puc_config_quatech 465 }, 466 467 { 0x135c, 0x0050, 0xffff, 0, 468 "Quatech ESC-100D", 469 -3, /* max 8x clock rate */ 470 PUC_PORT_8S, 0x14, 0, 8, 471 .config_function = puc_config_quatech 472 }, 473 474 { 0x135c, 0x0060, 0xffff, 0, 475 "Quatech ESC-100M", 476 -3, /* max 8x clock rate */ 477 PUC_PORT_8S, 0x14, 0, 8, 478 .config_function = puc_config_quatech 479 }, 480 481 { 0x135c, 0x0170, 0xffff, 0, 482 "Quatech QSCLP-100", 483 -1, /* max 2x clock rate */ 484 PUC_PORT_4S, 0x18, 0, 8, 485 .config_function = puc_config_quatech 486 }, 487 488 { 0x135c, 0x0180, 0xffff, 0, 489 "Quatech DSCLP-100", 490 -1, /* max 3x clock rate */ 491 PUC_PORT_2S, 0x18, 0, 8, 492 .config_function = puc_config_quatech 493 }, 494 495 { 0x135c, 0x01b0, 0xffff, 0, 496 "Quatech DSCLP-200/300", 497 -1, /* max 2x clock rate */ 498 PUC_PORT_2S, 0x18, 0, 8, 499 .config_function = puc_config_quatech 500 }, 501 502 { 0x135c, 0x01e0, 0xffff, 0, 503 "Quatech ESCLP-100", 504 -3, /* max 8x clock rate */ 505 PUC_PORT_8S, 0x10, 0, 8, 506 .config_function = puc_config_quatech 507 }, 508 509 { 0x1393, 0x1040, 0xffff, 0, 510 "Moxa Technologies, Smartio C104H/PCI", 511 DEFAULT_RCLK * 8, 512 PUC_PORT_4S, 0x18, 0, 8, 513 }, 514 515 { 0x1393, 0x1041, 0xffff, 0, 516 "Moxa Technologies, Smartio CP-104UL/PCI", 517 DEFAULT_RCLK * 8, 518 PUC_PORT_4S, 0x18, 0, 8, 519 }, 520 521 { 0x1393, 0x1043, 0xffff, 0, 522 "Moxa Technologies, Smartio CP-104EL/PCIe", 523 DEFAULT_RCLK * 8, 524 PUC_PORT_4S, 0x18, 0, 8, 525 }, 526 527 { 0x1393, 0x1141, 0xffff, 0, 528 "Moxa Technologies, Industio CP-114", 529 DEFAULT_RCLK * 8, 530 PUC_PORT_4S, 0x18, 0, 8, 531 }, 532 533 { 0x1393, 0x1680, 0xffff, 0, 534 "Moxa Technologies, C168H/PCI", 535 DEFAULT_RCLK * 8, 536 PUC_PORT_8S, 0x18, 0, 8, 537 }, 538 539 { 0x1393, 0x1681, 0xffff, 0, 540 "Moxa Technologies, C168U/PCI", 541 DEFAULT_RCLK * 8, 542 PUC_PORT_8S, 0x18, 0, 8, 543 }, 544 545 { 0x1393, 0x1682, 0xffff, 0, 546 "Moxa Technologies, CP-168EL/PCIe", 547 DEFAULT_RCLK * 8, 548 PUC_PORT_8S, 0x18, 0, 8, 549 }, 550 551 { 0x13a8, 0x0158, 0xffff, 0, 552 "Cronyx Omega2-PCI", 553 DEFAULT_RCLK * 8, 554 PUC_PORT_8S, 0x10, 0, -1, 555 .config_function = puc_config_cronyx 556 }, 557 558 { 0x13a8, 0x0258, 0xffff, 0, 559 "Exar XR17V258IV", 560 DEFAULT_RCLK * 8, 561 PUC_PORT_8S, 0x10, 0, -1, 562 }, 563 564 { 0x1407, 0x0100, 0xffff, 0, 565 "Lava Computers Dual Serial", 566 DEFAULT_RCLK, 567 PUC_PORT_2S, 0x10, 4, 0, 568 }, 569 570 { 0x1407, 0x0101, 0xffff, 0, 571 "Lava Computers Quatro A", 572 DEFAULT_RCLK, 573 PUC_PORT_2S, 0x10, 4, 0, 574 }, 575 576 { 0x1407, 0x0102, 0xffff, 0, 577 "Lava Computers Quatro B", 578 DEFAULT_RCLK, 579 PUC_PORT_2S, 0x10, 4, 0, 580 }, 581 582 { 0x1407, 0x0120, 0xffff, 0, 583 "Lava Computers Quattro-PCI A", 584 DEFAULT_RCLK, 585 PUC_PORT_2S, 0x10, 4, 0, 586 }, 587 588 { 0x1407, 0x0121, 0xffff, 0, 589 "Lava Computers Quattro-PCI B", 590 DEFAULT_RCLK, 591 PUC_PORT_2S, 0x10, 4, 0, 592 }, 593 594 { 0x1407, 0x0180, 0xffff, 0, 595 "Lava Computers Octo A", 596 DEFAULT_RCLK, 597 PUC_PORT_4S, 0x10, 4, 0, 598 }, 599 600 { 0x1407, 0x0181, 0xffff, 0, 601 "Lava Computers Octo B", 602 DEFAULT_RCLK, 603 PUC_PORT_4S, 0x10, 4, 0, 604 }, 605 606 { 0x1409, 0x7268, 0xffff, 0, 607 "Sunix SUN1888", 608 0, 609 PUC_PORT_2P, 0x10, 0, 8, 610 }, 611 612 { 0x1409, 0x7168, 0xffff, 0, 613 NULL, 614 DEFAULT_RCLK * 8, 615 PUC_PORT_NONSTANDARD, 0x10, -1, -1, 616 .config_function = puc_config_timedia 617 }, 618 619 /* 620 * Boards with an Oxford Semiconductor chip. 621 * 622 * Oxford Semiconductor provides documentation for their chip at: 623 * <URL:http://www.plxtech.com/products/uart/> 624 * 625 * As sold by Kouwell <URL:http://www.kouwell.com/>. 626 * I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. 627 */ 628 629 { 0x1415, 0x9501, 0x131f, 0x2050, 630 "SIIG Cyber 4 PCI 16550", 631 DEFAULT_RCLK * 10, 632 PUC_PORT_4S, 0x10, 0, 8, 633 }, 634 635 { 0x1415, 0x9501, 0x131f, 0x2051, 636 "SIIG Cyber 4S PCI 16C650 (20x family)", 637 DEFAULT_RCLK * 10, 638 PUC_PORT_4S, 0x10, 0, 8, 639 }, 640 641 { 0x1415, 0x9501, 0x131f, 0x2052, 642 "SIIG Quartet Serial 850", 643 DEFAULT_RCLK * 10, 644 PUC_PORT_4S, 0x10, 0, 8, 645 }, 646 647 { 0x1415, 0x9501, 0x14db, 0x2150, 648 "Kuroutoshikou SERIAL4P-LPPCI2", 649 DEFAULT_RCLK * 10, 650 PUC_PORT_4S, 0x10, 0, 8, 651 }, 652 653 { 0x1415, 0x9501, 0xffff, 0, 654 "Oxford Semiconductor OX16PCI954 UARTs", 655 DEFAULT_RCLK, 656 PUC_PORT_4S, 0x10, 0, 8, 657 }, 658 659 { 0x1415, 0x950a, 0x131f, 0x2030, 660 "SIIG Cyber 2S PCIe", 661 DEFAULT_RCLK * 10, 662 PUC_PORT_2S, 0x10, 0, 8, 663 }, 664 665 { 0x1415, 0x950a, 0xffff, 0, 666 "Oxford Semiconductor OX16PCI954 UARTs", 667 DEFAULT_RCLK, 668 PUC_PORT_4S, 0x10, 0, 8, 669 }, 670 671 { 0x1415, 0x9511, 0xffff, 0, 672 "Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)", 673 DEFAULT_RCLK, 674 PUC_PORT_4S, 0x10, 0, 8, 675 }, 676 677 { 0x1415, 0x9521, 0xffff, 0, 678 "Oxford Semiconductor OX16PCI952 UARTs", 679 DEFAULT_RCLK, 680 PUC_PORT_2S, 0x10, 4, 0, 681 }, 682 683 { 0x1415, 0x9538, 0xffff, 0, 684 "Oxford Semiconductor OX16PCI958 UARTs", 685 DEFAULT_RCLK * 10, 686 PUC_PORT_8S, 0x18, 0, 8, 687 }, 688 689 /* 690 * Perle boards use Oxford Semiconductor chips, but they store the 691 * Oxford Semiconductor device ID as a subvendor device ID and use 692 * their own device IDs. 693 */ 694 695 { 0x155f, 0x0331, 0xffff, 0, 696 "Perle Speed4 LE", 697 DEFAULT_RCLK * 8, 698 PUC_PORT_4S, 0x10, 0, 8, 699 }, 700 701 /* 702 * Oxford Semiconductor PCI Express Expresso family 703 * 704 * Found in many 'native' PCI Express serial boards such as: 705 * 706 * eMegatech MP954ER4 (4 port) and MP958ER8 (8 port) 707 * <URL:http://www.emegatech.com.tw/pdrs232pcie.html> 708 * 709 * Lindy 51189 (4 port) 710 * <URL:http://www.lindy.com> <URL:http://tinyurl.com/lindy-51189> 711 * 712 * StarTech.com PEX4S952 (4 port) and PEX8S952 (8 port) 713 * <URL:http://www.startech.com> 714 */ 715 716 { 0x1415, 0xc158, 0xffff, 0, 717 "Oxford Semiconductor OXPCIe952 UARTs", 718 DEFAULT_RCLK * 0x22, 719 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 720 .config_function = puc_config_oxford_pcie 721 }, 722 723 { 0x1415, 0xc15d, 0xffff, 0, 724 "Oxford Semiconductor OXPCIe952 UARTs (function 1)", 725 DEFAULT_RCLK * 0x22, 726 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 727 .config_function = puc_config_oxford_pcie 728 }, 729 730 { 0x1415, 0xc208, 0xffff, 0, 731 "Oxford Semiconductor OXPCIe954 UARTs", 732 DEFAULT_RCLK * 0x22, 733 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 734 .config_function = puc_config_oxford_pcie 735 }, 736 737 { 0x1415, 0xc20d, 0xffff, 0, 738 "Oxford Semiconductor OXPCIe954 UARTs (function 1)", 739 DEFAULT_RCLK * 0x22, 740 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 741 .config_function = puc_config_oxford_pcie 742 }, 743 744 { 0x1415, 0xc308, 0xffff, 0, 745 "Oxford Semiconductor OXPCIe958 UARTs", 746 DEFAULT_RCLK * 0x22, 747 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 748 .config_function = puc_config_oxford_pcie 749 }, 750 751 { 0x1415, 0xc30d, 0xffff, 0, 752 "Oxford Semiconductor OXPCIe958 UARTs (function 1)", 753 DEFAULT_RCLK * 0x22, 754 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 755 .config_function = puc_config_oxford_pcie 756 }, 757 758 { 0x14d2, 0x8010, 0xffff, 0, 759 "VScom PCI-100L", 760 DEFAULT_RCLK * 8, 761 PUC_PORT_1S, 0x14, 0, 0, 762 }, 763 764 { 0x14d2, 0x8020, 0xffff, 0, 765 "VScom PCI-200L", 766 DEFAULT_RCLK * 8, 767 PUC_PORT_2S, 0x14, 4, 0, 768 }, 769 770 { 0x14d2, 0x8028, 0xffff, 0, 771 "VScom 200Li", 772 DEFAULT_RCLK, 773 PUC_PORT_2S, 0x20, 0, 8, 774 }, 775 776 /* 777 * VScom (Titan?) PCI-800L. More modern variant of the 778 * PCI-800. Uses 6 discrete 16550 UARTs, plus another 779 * two of them obviously implemented as macro cells in 780 * the ASIC. This causes the weird port access pattern 781 * below, where two of the IO port ranges each access 782 * one of the ASIC UARTs, and a block of IO addresses 783 * access the external UARTs. 784 */ 785 { 0x14d2, 0x8080, 0xffff, 0, 786 "Titan VScom PCI-800L", 787 DEFAULT_RCLK * 8, 788 PUC_PORT_8S, 0x14, -1, -1, 789 .config_function = puc_config_titan 790 }, 791 792 /* 793 * VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers 794 * 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has 795 * device ID 3 and PCI device 1 device ID 4. 796 */ 797 { 0x14d2, 0xa003, 0xffff, 0, 798 "Titan PCI-800H", 799 DEFAULT_RCLK * 8, 800 PUC_PORT_4S, 0x10, 0, 8, 801 }, 802 { 0x14d2, 0xa004, 0xffff, 0, 803 "Titan PCI-800H", 804 DEFAULT_RCLK * 8, 805 PUC_PORT_4S, 0x10, 0, 8, 806 }, 807 808 { 0x14d2, 0xa005, 0xffff, 0, 809 "Titan PCI-200H", 810 DEFAULT_RCLK * 8, 811 PUC_PORT_2S, 0x10, 0, 8, 812 }, 813 814 { 0x14d2, 0xe020, 0xffff, 0, 815 "Titan VScom PCI-200HV2", 816 DEFAULT_RCLK * 8, 817 PUC_PORT_2S, 0x10, 4, 0, 818 }, 819 820 { 0x14db, 0x2130, 0xffff, 0, 821 "Avlab Technology, PCI IO 2S", 822 DEFAULT_RCLK, 823 PUC_PORT_2S, 0x10, 4, 0, 824 }, 825 826 { 0x14db, 0x2150, 0xffff, 0, 827 "Avlab Low Profile PCI 4 Serial", 828 DEFAULT_RCLK, 829 PUC_PORT_4S, 0x10, 4, 0, 830 }, 831 832 { 0x14db, 0x2152, 0xffff, 0, 833 "Avlab Low Profile PCI 4 Serial", 834 DEFAULT_RCLK, 835 PUC_PORT_4S, 0x10, 4, 0, 836 }, 837 838 { 0x1592, 0x0781, 0xffff, 0, 839 "Syba Tech Ltd. PCI-4S2P-550-ECP", 840 DEFAULT_RCLK, 841 PUC_PORT_4S1P, 0x10, 0, -1, 842 .config_function = puc_config_syba 843 }, 844 845 { 0x6666, 0x0001, 0xffff, 0, 846 "Decision Computer Inc, PCCOM 4-port serial", 847 DEFAULT_RCLK, 848 PUC_PORT_4S, 0x1c, 0, 8, 849 }, 850 851 { 0x6666, 0x0002, 0xffff, 0, 852 "Decision Computer Inc, PCCOM 8-port serial", 853 DEFAULT_RCLK, 854 PUC_PORT_8S, 0x1c, 0, 8, 855 }, 856 857 { 0x6666, 0x0004, 0xffff, 0, 858 "PCCOM dual port RS232/422/485", 859 DEFAULT_RCLK, 860 PUC_PORT_2S, 0x1c, 0, 8, 861 }, 862 863 { 0x9710, 0x9815, 0xffff, 0, 864 "NetMos NM9815 Dual 1284 Printer port", 865 0, 866 PUC_PORT_2P, 0x10, 8, 0, 867 }, 868 869 /* 870 * This is more specific than the generic NM9835 entry that follows, and 871 * is placed here to _prevent_ puc from claiming this single port card. 872 * 873 * uart(4) will claim this device. 874 */ 875 { 0x9710, 0x9835, 0x1000, 1, 876 "NetMos NM9835 based 1-port serial", 877 DEFAULT_RCLK, 878 PUC_PORT_1S, 0x10, 4, 0, 879 }, 880 881 { 0x9710, 0x9835, 0x1000, 2, 882 "NetMos NM9835 based 2-port serial", 883 DEFAULT_RCLK, 884 PUC_PORT_2S, 0x10, 4, 0, 885 }, 886 887 { 0x9710, 0x9835, 0xffff, 0, 888 "NetMos NM9835 Dual UART and 1284 Printer port", 889 DEFAULT_RCLK, 890 PUC_PORT_2S1P, 0x10, 4, 0, 891 }, 892 893 { 0x9710, 0x9845, 0x1000, 0x0006, 894 "NetMos NM9845 6 Port UART", 895 DEFAULT_RCLK, 896 PUC_PORT_6S, 0x10, 4, 0, 897 }, 898 899 { 0x9710, 0x9845, 0xffff, 0, 900 "NetMos NM9845 Quad UART and 1284 Printer port", 901 DEFAULT_RCLK, 902 PUC_PORT_4S1P, 0x10, 4, 0, 903 }, 904 905 { 0x9710, 0x9865, 0xa000, 0x3002, 906 "NetMos NM9865 Dual UART", 907 DEFAULT_RCLK, 908 PUC_PORT_2S, 0x10, 4, 0, 909 }, 910 911 { 0x9710, 0x9865, 0xa000, 0x3003, 912 "NetMos NM9865 Triple UART", 913 DEFAULT_RCLK, 914 PUC_PORT_3S, 0x10, 4, 0, 915 }, 916 917 { 0x9710, 0x9865, 0xa000, 0x3004, 918 "NetMos NM9865 Quad UART", 919 DEFAULT_RCLK, 920 PUC_PORT_4S, 0x10, 4, 0,0 921 }, 922 923 { 0x9710, 0x9865, 0xa000, 0x3011, 924 "NetMos NM9865 Single UART and 1284 Printer port", 925 DEFAULT_RCLK, 926 PUC_PORT_1S1P, 0x10, 4, 0, 927 }, 928 929 { 0x9710, 0x9865, 0xa000, 0x3012, 930 "NetMos NM9865 Dual UART and 1284 Printer port", 931 DEFAULT_RCLK, 932 PUC_PORT_2S1P, 0x10, 4, 0, 933 }, 934 935 { 0x9710, 0x9865, 0xa000, 0x3020, 936 "NetMos NM9865 Dual 1284 Printer port", 937 DEFAULT_RCLK, 938 PUC_PORT_2P, 0x10, 4, 0, 939 }, 940 941 { 0xb00c, 0x021c, 0xffff, 0, 942 "IC Book Labs Gunboat x4 Lite", 943 DEFAULT_RCLK, 944 PUC_PORT_4S, 0x10, 0, 8, 945 .config_function = puc_config_icbook 946 }, 947 948 { 0xb00c, 0x031c, 0xffff, 0, 949 "IC Book Labs Gunboat x4 Pro", 950 DEFAULT_RCLK, 951 PUC_PORT_4S, 0x10, 0, 8, 952 .config_function = puc_config_icbook 953 }, 954 955 { 0xb00c, 0x041c, 0xffff, 0, 956 "IC Book Labs Ironclad x8 Lite", 957 DEFAULT_RCLK, 958 PUC_PORT_8S, 0x10, 0, 8, 959 .config_function = puc_config_icbook 960 }, 961 962 { 0xb00c, 0x051c, 0xffff, 0, 963 "IC Book Labs Ironclad x8 Pro", 964 DEFAULT_RCLK, 965 PUC_PORT_8S, 0x10, 0, 8, 966 .config_function = puc_config_icbook 967 }, 968 969 { 0xb00c, 0x081c, 0xffff, 0, 970 "IC Book Labs Dreadnought x16 Pro", 971 DEFAULT_RCLK * 8, 972 PUC_PORT_16S, 0x10, 0, 8, 973 .config_function = puc_config_icbook 974 }, 975 976 { 0xb00c, 0x091c, 0xffff, 0, 977 "IC Book Labs Dreadnought x16 Lite", 978 DEFAULT_RCLK, 979 PUC_PORT_16S, 0x10, 0, 8, 980 .config_function = puc_config_icbook 981 }, 982 983 { 0xb00c, 0x0a1c, 0xffff, 0, 984 "IC Book Labs Gunboat x2 Low Profile", 985 DEFAULT_RCLK, 986 PUC_PORT_2S, 0x10, 0, 8, 987 }, 988 989 { 0xb00c, 0x0b1c, 0xffff, 0, 990 "IC Book Labs Gunboat x4 Low Profile", 991 DEFAULT_RCLK, 992 PUC_PORT_4S, 0x10, 0, 8, 993 .config_function = puc_config_icbook 994 }, 995 996 { 0xffff, 0, 0xffff, 0, NULL, 0 } 997}; 998 999static int 1000puc_config_amc(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1001 intptr_t *res) 1002{ 1003 switch (cmd) { 1004 case PUC_CFG_GET_OFS: 1005 *res = 8 * (port & 1); 1006 return (0); 1007 case PUC_CFG_GET_RID: 1008 *res = 0x14 + (port >> 1) * 4; 1009 return (0); 1010 default: 1011 break; 1012 } 1013 return (ENXIO); 1014} 1015 1016static int 1017puc_config_cronyx(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1018 intptr_t *res) 1019{ 1020 if (cmd == PUC_CFG_GET_OFS) { 1021 *res = port * 0x200; 1022 return (0); 1023 } 1024 return (ENXIO); 1025} 1026 1027static int 1028puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1029 intptr_t *res) 1030{ 1031 const struct puc_cfg *cfg = sc->sc_cfg; 1032 1033 if (cmd == PUC_CFG_GET_OFS) { 1034 if (cfg->subdevice == 0x1282) /* Everest SP */ 1035 port <<= 1; 1036 else if (cfg->subdevice == 0x104b) /* Maestro SP2 */ 1037 port = (port == 3) ? 4 : port; 1038 *res = port * 8 + ((port > 2) ? 0x18 : 0); 1039 return (0); 1040 } 1041 return (ENXIO); 1042} 1043 1044static int 1045puc_config_icbook(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1046 intptr_t *res) 1047{ 1048 if (cmd == PUC_CFG_GET_ILR) { 1049 *res = PUC_ILR_DIGI; 1050 return (0); 1051 } 1052 return (ENXIO); 1053} 1054 1055static int 1056puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1057 intptr_t *res) 1058{ 1059 const struct puc_cfg *cfg = sc->sc_cfg; 1060 struct puc_bar *bar; 1061 uint8_t v0, v1; 1062 1063 switch (cmd) { 1064 case PUC_CFG_SETUP: 1065 /* 1066 * Check if the scratchpad register is enabled or if the 1067 * interrupt status and options registers are active. 1068 */ 1069 bar = puc_get_bar(sc, cfg->rid); 1070 if (bar == NULL) 1071 return (ENXIO); 1072 /* Set DLAB in the LCR register of UART 0. */ 1073 bus_write_1(bar->b_res, 3, 0x80); 1074 /* Write 0 to the SPR register of UART 0. */ 1075 bus_write_1(bar->b_res, 7, 0); 1076 /* Read back the contents of the SPR register of UART 0. */ 1077 v0 = bus_read_1(bar->b_res, 7); 1078 /* Write a specific value to the SPR register of UART 0. */ 1079 bus_write_1(bar->b_res, 7, 0x80 + -cfg->clock); 1080 /* Read back the contents of the SPR register of UART 0. */ 1081 v1 = bus_read_1(bar->b_res, 7); 1082 /* Clear DLAB in the LCR register of UART 0. */ 1083 bus_write_1(bar->b_res, 3, 0); 1084 /* Save the two values read-back from the SPR register. */ 1085 sc->sc_cfg_data = (v0 << 8) | v1; 1086 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 1087 /* 1088 * The SPR register echoed the two values written 1089 * by us. This means that the SPAD jumper is set. 1090 */ 1091 device_printf(sc->sc_dev, "warning: extra features " 1092 "not usable -- SPAD compatibility enabled\n"); 1093 return (0); 1094 } 1095 if (v0 != 0) { 1096 /* 1097 * The first value doesn't match. This can only mean 1098 * that the SPAD jumper is not set and that a non- 1099 * standard fixed clock multiplier jumper is set. 1100 */ 1101 if (bootverbose) 1102 device_printf(sc->sc_dev, "fixed clock rate " 1103 "multiplier of %d\n", 1 << v0); 1104 if (v0 < -cfg->clock) 1105 device_printf(sc->sc_dev, "warning: " 1106 "suboptimal fixed clock rate multiplier " 1107 "setting\n"); 1108 return (0); 1109 } 1110 /* 1111 * The first value matched, but the second didn't. We know 1112 * that the SPAD jumper is not set. We also know that the 1113 * clock rate multiplier is software controlled *and* that 1114 * we just programmed it to the maximum allowed. 1115 */ 1116 if (bootverbose) 1117 device_printf(sc->sc_dev, "clock rate multiplier of " 1118 "%d selected\n", 1 << -cfg->clock); 1119 return (0); 1120 case PUC_CFG_GET_CLOCK: 1121 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1122 v1 = sc->sc_cfg_data & 0xff; 1123 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 1124 /* 1125 * XXX With the SPAD jumper applied, there's no 1126 * easy way of knowing if there's also a clock 1127 * rate multiplier jumper installed. Let's hope 1128 * not... 1129 */ 1130 *res = DEFAULT_RCLK; 1131 } else if (v0 == 0) { 1132 /* 1133 * No clock rate multiplier jumper installed, 1134 * so we programmed the board with the maximum 1135 * multiplier allowed as given to us in the 1136 * clock field of the config record (negated). 1137 */ 1138 *res = DEFAULT_RCLK << -cfg->clock; 1139 } else 1140 *res = DEFAULT_RCLK << v0; 1141 return (0); 1142 case PUC_CFG_GET_ILR: 1143 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1144 v1 = sc->sc_cfg_data & 0xff; 1145 *res = (v0 == 0 && v1 == 0x80 + -cfg->clock) 1146 ? PUC_ILR_NONE : PUC_ILR_QUATECH; 1147 return (0); 1148 default: 1149 break; 1150 } 1151 return (ENXIO); 1152} 1153 1154static int 1155puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1156 intptr_t *res) 1157{ 1158 static int base[] = { 0x251, 0x3f0, 0 }; 1159 const struct puc_cfg *cfg = sc->sc_cfg; 1160 struct puc_bar *bar; 1161 int efir, idx, ofs; 1162 uint8_t v; 1163 1164 switch (cmd) { 1165 case PUC_CFG_SETUP: 1166 bar = puc_get_bar(sc, cfg->rid); 1167 if (bar == NULL) 1168 return (ENXIO); 1169 1170 /* configure both W83877TFs */ 1171 bus_write_1(bar->b_res, 0x250, 0x89); 1172 bus_write_1(bar->b_res, 0x3f0, 0x87); 1173 bus_write_1(bar->b_res, 0x3f0, 0x87); 1174 idx = 0; 1175 while (base[idx] != 0) { 1176 efir = base[idx]; 1177 bus_write_1(bar->b_res, efir, 0x09); 1178 v = bus_read_1(bar->b_res, efir + 1); 1179 if ((v & 0x0f) != 0x0c) 1180 return (ENXIO); 1181 bus_write_1(bar->b_res, efir, 0x16); 1182 v = bus_read_1(bar->b_res, efir + 1); 1183 bus_write_1(bar->b_res, efir, 0x16); 1184 bus_write_1(bar->b_res, efir + 1, v | 0x04); 1185 bus_write_1(bar->b_res, efir, 0x16); 1186 bus_write_1(bar->b_res, efir + 1, v & ~0x04); 1187 ofs = base[idx] & 0x300; 1188 bus_write_1(bar->b_res, efir, 0x23); 1189 bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2); 1190 bus_write_1(bar->b_res, efir, 0x24); 1191 bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2); 1192 bus_write_1(bar->b_res, efir, 0x25); 1193 bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2); 1194 bus_write_1(bar->b_res, efir, 0x17); 1195 bus_write_1(bar->b_res, efir + 1, 0x03); 1196 bus_write_1(bar->b_res, efir, 0x28); 1197 bus_write_1(bar->b_res, efir + 1, 0x43); 1198 idx++; 1199 } 1200 bus_write_1(bar->b_res, 0x250, 0xaa); 1201 bus_write_1(bar->b_res, 0x3f0, 0xaa); 1202 return (0); 1203 case PUC_CFG_GET_OFS: 1204 switch (port) { 1205 case 0: 1206 *res = 0x2f8; 1207 return (0); 1208 case 1: 1209 *res = 0x2e8; 1210 return (0); 1211 case 2: 1212 *res = 0x3f8; 1213 return (0); 1214 case 3: 1215 *res = 0x3e8; 1216 return (0); 1217 case 4: 1218 *res = 0x278; 1219 return (0); 1220 } 1221 break; 1222 default: 1223 break; 1224 } 1225 return (ENXIO); 1226} 1227 1228static int 1229puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1230 intptr_t *res) 1231{ 1232 const struct puc_cfg *cfg = sc->sc_cfg; 1233 1234 switch (cmd) { 1235 case PUC_CFG_GET_OFS: 1236 if (cfg->ports == PUC_PORT_8S) { 1237 *res = (port > 4) ? 8 * (port - 4) : 0; 1238 return (0); 1239 } 1240 break; 1241 case PUC_CFG_GET_RID: 1242 if (cfg->ports == PUC_PORT_8S) { 1243 *res = 0x10 + ((port > 4) ? 0x10 : 4 * port); 1244 return (0); 1245 } 1246 if (cfg->ports == PUC_PORT_2S1P) { 1247 switch (port) { 1248 case 0: *res = 0x10; return (0); 1249 case 1: *res = 0x14; return (0); 1250 case 2: *res = 0x1c; return (0); 1251 } 1252 } 1253 break; 1254 default: 1255 break; 1256 } 1257 return (ENXIO); 1258} 1259 1260static int 1261puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1262 intptr_t *res) 1263{ 1264 static uint16_t dual[] = { 1265 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 1266 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 1267 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 1268 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 1269 0xD079, 0 1270 }; 1271 static uint16_t quad[] = { 1272 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 1273 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 1274 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 1275 0xB157, 0 1276 }; 1277 static uint16_t octa[] = { 1278 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 1279 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 1280 }; 1281 static struct { 1282 int ports; 1283 uint16_t *ids; 1284 } subdevs[] = { 1285 { 2, dual }, 1286 { 4, quad }, 1287 { 8, octa }, 1288 { 0, NULL } 1289 }; 1290 static char desc[64]; 1291 int dev, id; 1292 uint16_t subdev; 1293 1294 switch (cmd) { 1295 case PUC_CFG_GET_CLOCK: 1296 if (port < 2) 1297 *res = DEFAULT_RCLK * 8; 1298 else 1299 *res = DEFAULT_RCLK; 1300 return (0); 1301 case PUC_CFG_GET_DESC: 1302 snprintf(desc, sizeof(desc), 1303 "Timedia technology %d Port Serial", (int)sc->sc_cfg_data); 1304 *res = (intptr_t)desc; 1305 return (0); 1306 case PUC_CFG_GET_NPORTS: 1307 subdev = pci_get_subdevice(sc->sc_dev); 1308 dev = 0; 1309 while (subdevs[dev].ports != 0) { 1310 id = 0; 1311 while (subdevs[dev].ids[id] != 0) { 1312 if (subdev == subdevs[dev].ids[id]) { 1313 sc->sc_cfg_data = subdevs[dev].ports; 1314 *res = sc->sc_cfg_data; 1315 return (0); 1316 } 1317 id++; 1318 } 1319 dev++; 1320 } 1321 return (ENXIO); 1322 case PUC_CFG_GET_OFS: 1323 *res = (port == 1 || port == 3) ? 8 : 0; 1324 return (0); 1325 case PUC_CFG_GET_RID: 1326 *res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4; 1327 return (0); 1328 case PUC_CFG_GET_TYPE: 1329 *res = PUC_TYPE_SERIAL; 1330 return (0); 1331 default: 1332 break; 1333 } 1334 return (ENXIO); 1335} 1336 1337static int 1338puc_config_oxford_pcie(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1339 intptr_t *res) 1340{ 1341 const struct puc_cfg *cfg = sc->sc_cfg; 1342 int idx; 1343 struct puc_bar *bar; 1344 uint8_t value; 1345 1346 switch (cmd) { 1347 case PUC_CFG_SETUP: 1348 device_printf(sc->sc_dev, "%d UARTs detected\n", 1349 sc->sc_nports); 1350 1351 /* Set UARTs to enhanced mode */ 1352 bar = puc_get_bar(sc, cfg->rid); 1353 if (bar == NULL) 1354 return (ENXIO); 1355 1356 for (idx = 0; idx < sc->sc_nports; idx++) { 1357 value = bus_read_1(bar->b_res, 0x1000 + (idx << 9) 1358 + 0x92); 1359 bus_write_1(bar->b_res, 0x1000 + (idx << 9) + 0x92, 1360 value | 0x10); 1361 } 1362 1363 return (0); 1364 case PUC_CFG_GET_LEN: 1365 *res = 0x200; 1366 return (0); 1367 case PUC_CFG_GET_NPORTS: 1368 /* 1369 * Check if we are being called from puc_bfe_attach() 1370 * or puc_bfe_probe(). If puc_bfe_probe(), we cannot 1371 * puc_get_bar(), so we return a value of 16. This has cosmetic 1372 * side-effects at worst; in PUC_CFG_GET_DESC, 1373 * (int)sc->sc_cfg_data will not contain the true number of 1374 * ports in PUC_CFG_GET_DESC, but we are not implementing that 1375 * call for this device family anyway. 1376 * 1377 * The check is for initialisation of sc->sc_bar[idx], which is 1378 * only done in puc_bfe_attach(). 1379 */ 1380 idx = 0; 1381 do { 1382 if (sc->sc_bar[idx++].b_rid != -1) { 1383 sc->sc_cfg_data = 16; 1384 *res = sc->sc_cfg_data; 1385 return (0); 1386 } 1387 } while (idx < PUC_PCI_BARS); 1388 1389 bar = puc_get_bar(sc, cfg->rid); 1390 if (bar == NULL) 1391 return (ENXIO); 1392 1393 value = bus_read_1(bar->b_res, 0x04); 1394 if (value == 0) 1395 return (ENXIO); 1396 1397 sc->sc_cfg_data = value; 1398 *res = sc->sc_cfg_data; 1399 return (0); 1400 case PUC_CFG_GET_OFS: 1401 *res = 0x1000 + (port << 9); 1402 return (0); 1403 case PUC_CFG_GET_TYPE: 1404 *res = PUC_TYPE_SERIAL; 1405 return (0); 1406 default: 1407 break; 1408 } 1409 return (ENXIO); 1410} 1411 1412static int 1413puc_config_titan(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1414 intptr_t *res) 1415{ 1416 switch (cmd) { 1417 case PUC_CFG_GET_OFS: 1418 *res = (port < 3) ? 0 : (port - 2) << 3; 1419 return (0); 1420 case PUC_CFG_GET_RID: 1421 *res = 0x14 + ((port >= 2) ? 0x0c : port << 2); 1422 return (0); 1423 default: 1424 break; 1425 } 1426 return (ENXIO); 1427} 1428