pcf_ebus.c revision 233018
1/*- 2 * Copyright (c) 2004 Marius Strobl, Joerg Wunsch 3 * 4 * derived from sys/i386/isa/pcf.c which is: 5 * 6 * Copyright (c) 1998 Nicolas Souchu, Marc Bouget 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 */ 30#include <sys/cdefs.h> 31__FBSDID("$FreeBSD: head/sys/dev/pcf/pcf_ebus.c 233018 2012-03-15 22:53:39Z nwhitehorn $"); 32 33/* 34 * Device specific driver for the EBus i2c devices found on some sun4u 35 * systems. On systems not having a boot-bus controller the i2c devices 36 * are PCF8584. 37 * 38 * Known onboard slave devices on the primary bus are: 39 * 40 * AXe: 41 * 0x40 PCF8574 I/O fan status (CPU fans 1+2) 42 * 0x9e PCF8591 A/D temperature (CPU + hotspot) 43 * 44 * AXmp: 45 * 0x70 PCF8574 I/O fan status (fans 1-4) 46 * 0x78 PCF8574 I/O fan fail interrupt 47 * 0x9a PCF8591 A/D voltage (CPU core) 48 * 0x9c PCF8591 A/D temperature (hotspots 1+2, aux. analog 1+2) 49 * 0x9e PCF8591 A/D temperature (CPUs 1-4) 50 * 51 * CP1400: 52 * 0x70 PCF8574 I/O reserved for factory use 53 * 0x9e PCF8591 A/D temperature (CPU) 54 * 55 * CP1500: 56 * 0x70 PCF8574 I/O reserved for factory use 57 * 0x72 PCF8574 I/O geographic address + power supply status lines 58 * 0x9e PCF8591 A/D temperature (CPU) 59 * 0xa0 AT24C01A hostid 60 * 61 * For AXmp, CP1400 and CP1500 these are described in more detail in: 62 * http://www.sun.com/oem/products/manuals/805-7581-04.pdf 63 * 64 */ 65 66#include <sys/param.h> 67#include <sys/bus.h> 68#include <sys/lock.h> 69#include <sys/kernel.h> 70#include <sys/module.h> 71#include <sys/mutex.h> 72#include <sys/resource.h> 73#include <sys/systm.h> 74 75#include <dev/ofw/ofw_bus.h> 76#include <dev/ofw/openfirm.h> 77 78#include <machine/bus.h> 79#include <machine/resource.h> 80 81#include <sys/rman.h> 82 83#include <dev/iicbus/iiconf.h> 84#include <dev/pcf/pcfvar.h> 85#include "iicbus_if.h" 86 87#define PCF_NAME "pcf" 88 89static int pcf_ebus_probe(device_t); 90static int pcf_ebus_attach(device_t); 91static int pcf_ebus_detach(device_t); 92 93static device_method_t pcf_ebus_methods[] = { 94 /* device interface */ 95 DEVMETHOD(device_probe, pcf_ebus_probe), 96 DEVMETHOD(device_attach, pcf_ebus_attach), 97 DEVMETHOD(device_detach, pcf_ebus_detach), 98 99 /* iicbus interface */ 100 DEVMETHOD(iicbus_callback, iicbus_null_callback), 101 DEVMETHOD(iicbus_repeated_start, pcf_repeated_start), 102 DEVMETHOD(iicbus_start, pcf_start), 103 DEVMETHOD(iicbus_stop, pcf_stop), 104 DEVMETHOD(iicbus_write, pcf_write), 105 DEVMETHOD(iicbus_read, pcf_read), 106 DEVMETHOD(iicbus_reset, pcf_rst_card), 107 { 0, 0 } 108}; 109 110static devclass_t pcf_ebus_devclass; 111 112static driver_t pcf_ebus_driver = { 113 PCF_NAME, 114 pcf_ebus_methods, 115 sizeof(struct pcf_softc), 116}; 117 118static int 119pcf_ebus_probe(device_t dev) 120{ 121 const char *compat; 122 123 /* 124 * We must not attach to this i2c device if this is a system with 125 * a boot-bus controller. Additionally testing the compatibility 126 * property will hopefully take care of this. 127 */ 128 if (strcmp("i2c", ofw_bus_get_name(dev)) == 0) { 129 compat = ofw_bus_get_compat(dev); 130 if (compat != NULL && strcmp("i2cpcf,8584", compat) == 0) { 131 device_set_desc(dev, "PCF8584 I2C bus controller"); 132 return (0); 133 } 134 } 135 return (ENXIO); 136} 137 138static int 139pcf_ebus_attach(device_t dev) 140{ 141 struct pcf_softc *sc; 142 int rv = ENXIO; 143 phandle_t node; 144 uint64_t own_addr; 145 146 sc = DEVTOSOFTC(dev); 147 mtx_init(&sc->pcf_lock, device_get_nameunit(dev), "pcf", MTX_DEF); 148 149 /* get OFW node of the pcf */ 150 if ((node = ofw_bus_get_node(dev)) == -1) { 151 device_printf(dev, "cannot get OFW node\n"); 152 goto error; 153 } 154 155 /* IO port is mandatory */ 156 sc->res_ioport = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 157 &sc->rid_ioport, RF_ACTIVE); 158 if (sc->res_ioport == 0) { 159 device_printf(dev, "cannot reserve I/O port range\n"); 160 goto error; 161 } 162 163 sc->pcf_flags = device_get_flags(dev); 164 165 /* 166 * XXX use poll-mode property? 167 */ 168 if (!(sc->pcf_flags & IIC_POLLED)) { 169 sc->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 170 &sc->rid_irq, RF_ACTIVE); 171 if (sc->res_irq == 0) { 172 device_printf(dev, "can't reserve irq, polled mode.\n"); 173 sc->pcf_flags |= IIC_POLLED; 174 } 175 } 176 177 /* 178 * XXX on AXmp there's probably a second IRQ which is the fan fail 179 * interrupt genererated by the PCF8574 at 0x78. 180 */ 181 182 /* get address of the pcf */ 183 if (OF_getprop(node, "own-address", &own_addr, sizeof(own_addr)) == 184 -1) { 185 device_printf(dev, "cannot get own address\n"); 186 goto error; 187 } 188 if (bootverbose) 189 device_printf(dev, "PCF8584 address: 0x%08llx\n", (unsigned 190 long long)own_addr); 191 192 /* reset the chip */ 193 pcf_rst_card(dev, IIC_FASTEST, own_addr, NULL); 194 195 if (sc->res_irq) { 196 rv = bus_setup_intr(dev, sc->res_irq, 197 INTR_TYPE_NET /* | INTR_ENTROPY */, NULL, pcf_intr, sc, 198 &sc->intr_cookie); 199 if (rv) { 200 device_printf(dev, "could not setup IRQ\n"); 201 goto error; 202 } 203 } 204 205 if ((sc->iicbus = device_add_child(dev, "iicbus", -1)) == NULL) 206 device_printf(dev, "could not allocate iicbus instance\n"); 207 208 /* probe and attach the iicbus */ 209 bus_generic_attach(dev); 210 211 return (0); 212 213error: 214 if (sc->res_irq != 0) { 215 bus_release_resource(dev, SYS_RES_IRQ, sc->rid_irq, 216 sc->res_irq); 217 } 218 if (sc->res_ioport != 0) { 219 bus_release_resource(dev, SYS_RES_MEMORY, sc->rid_ioport, 220 sc->res_ioport); 221 } 222 mtx_destroy(&sc->pcf_lock); 223 return (rv); 224} 225 226static int 227pcf_ebus_detach(device_t dev) 228{ 229 struct pcf_softc *sc; 230 int rv; 231 232 sc = DEVTOSOFTC(dev); 233 234 if ((rv = bus_generic_detach(dev)) != 0) 235 return (rv); 236 237 if ((rv = device_delete_child(dev, sc->iicbus)) != 0) 238 return (rv); 239 240 if (sc->res_irq != 0) { 241 bus_teardown_intr(dev, sc->res_irq, 242 sc->intr_cookie); 243 bus_release_resource(dev, SYS_RES_IRQ, sc->rid_irq, 244 sc->res_irq); 245 } 246 247 bus_release_resource(dev, SYS_RES_MEMORY, sc->rid_ioport, 248 sc->res_ioport); 249 mtx_destroy(&sc->pcf_lock); 250 251 return (0); 252} 253 254DRIVER_MODULE(pcf_ebus, ebus, pcf_ebus_driver, pcf_ebus_devclass, 0, 0); 255