mlx.c revision 78752
1/*- 2 * Copyright (c) 1999 Michael Smith 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD: head/sys/dev/mlx/mlx.c 78752 2001-06-25 04:32:31Z msmith $ 27 */ 28 29/* 30 * Driver for the Mylex DAC960 family of RAID controllers. 31 */ 32 33#include <sys/param.h> 34#include <sys/systm.h> 35#include <sys/malloc.h> 36#include <sys/kernel.h> 37 38#include <sys/bus.h> 39#include <sys/conf.h> 40#include <sys/devicestat.h> 41#include <sys/disk.h> 42#include <sys/stat.h> 43 44#include <machine/resource.h> 45#include <machine/bus_memio.h> 46#include <machine/bus_pio.h> 47#include <machine/bus.h> 48#include <machine/clock.h> 49#include <sys/rman.h> 50 51#include <dev/mlx/mlx_compat.h> 52#include <dev/mlx/mlxio.h> 53#include <dev/mlx/mlxvar.h> 54#include <dev/mlx/mlxreg.h> 55 56#define MLX_CDEV_MAJOR 130 57 58static struct cdevsw mlx_cdevsw = { 59 /* open */ mlx_open, 60 /* close */ mlx_close, 61 /* read */ noread, 62 /* write */ nowrite, 63 /* ioctl */ mlx_ioctl, 64 /* poll */ nopoll, 65 /* mmap */ nommap, 66 /* strategy */ nostrategy, 67 /* name */ "mlx", 68 /* maj */ MLX_CDEV_MAJOR, 69 /* dump */ nodump, 70 /* psize */ nopsize, 71 /* flags */ 0, 72}; 73 74devclass_t mlx_devclass; 75 76/* 77 * Per-interface accessor methods 78 */ 79static int mlx_v3_tryqueue(struct mlx_softc *sc, struct mlx_command *mc); 80static int mlx_v3_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); 81static void mlx_v3_intaction(struct mlx_softc *sc, int action); 82static int mlx_v3_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2); 83 84static int mlx_v4_tryqueue(struct mlx_softc *sc, struct mlx_command *mc); 85static int mlx_v4_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); 86static void mlx_v4_intaction(struct mlx_softc *sc, int action); 87static int mlx_v4_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2); 88 89static int mlx_v5_tryqueue(struct mlx_softc *sc, struct mlx_command *mc); 90static int mlx_v5_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); 91static void mlx_v5_intaction(struct mlx_softc *sc, int action); 92static int mlx_v5_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2); 93 94/* 95 * Status monitoring 96 */ 97static void mlx_periodic(void *data); 98static void mlx_periodic_enquiry(struct mlx_command *mc); 99static void mlx_periodic_eventlog_poll(struct mlx_softc *sc); 100static void mlx_periodic_eventlog_respond(struct mlx_command *mc); 101static void mlx_periodic_rebuild(struct mlx_command *mc); 102 103/* 104 * Channel Pause 105 */ 106static void mlx_pause_action(struct mlx_softc *sc); 107static void mlx_pause_done(struct mlx_command *mc); 108 109/* 110 * Command submission. 111 */ 112static void *mlx_enquire(struct mlx_softc *sc, int command, size_t bufsize, 113 void (*complete)(struct mlx_command *mc)); 114static int mlx_flush(struct mlx_softc *sc); 115static int mlx_check(struct mlx_softc *sc, int drive); 116static int mlx_rebuild(struct mlx_softc *sc, int channel, int target); 117static int mlx_wait_command(struct mlx_command *mc); 118static int mlx_poll_command(struct mlx_command *mc); 119static void mlx_startio(struct mlx_softc *sc); 120static void mlx_completeio(struct mlx_command *mc); 121static int mlx_user_command(struct mlx_softc *sc, struct mlx_usercommand *mu); 122 123/* 124 * Command buffer allocation. 125 */ 126static struct mlx_command *mlx_alloccmd(struct mlx_softc *sc); 127static void mlx_releasecmd(struct mlx_command *mc); 128static void mlx_freecmd(struct mlx_command *mc); 129 130/* 131 * Command management. 132 */ 133static int mlx_getslot(struct mlx_command *mc); 134static void mlx_mapcmd(struct mlx_command *mc); 135static void mlx_unmapcmd(struct mlx_command *mc); 136static int mlx_start(struct mlx_command *mc); 137static int mlx_done(struct mlx_softc *sc); 138static void mlx_complete(struct mlx_softc *sc); 139 140/* 141 * Debugging. 142 */ 143static char *mlx_diagnose_command(struct mlx_command *mc); 144static void mlx_describe_controller(struct mlx_softc *sc); 145static int mlx_fw_message(struct mlx_softc *sc, int status, int param1, int param2); 146 147/* 148 * Utility functions. 149 */ 150static struct mlx_sysdrive *mlx_findunit(struct mlx_softc *sc, int unit); 151 152/******************************************************************************** 153 ******************************************************************************** 154 Public Interfaces 155 ******************************************************************************** 156 ********************************************************************************/ 157 158/******************************************************************************** 159 * Free all of the resources associated with (sc) 160 * 161 * Should not be called if the controller is active. 162 */ 163void 164mlx_free(struct mlx_softc *sc) 165{ 166 struct mlx_command *mc; 167 168 debug_called(1); 169 170 /* cancel status timeout */ 171 untimeout(mlx_periodic, sc, sc->mlx_timeout); 172 173 /* throw away any command buffers */ 174 while ((mc = TAILQ_FIRST(&sc->mlx_freecmds)) != NULL) { 175 TAILQ_REMOVE(&sc->mlx_freecmds, mc, mc_link); 176 mlx_freecmd(mc); 177 } 178 179 /* destroy data-transfer DMA tag */ 180 if (sc->mlx_buffer_dmat) 181 bus_dma_tag_destroy(sc->mlx_buffer_dmat); 182 183 /* free and destroy DMA memory and tag for s/g lists */ 184 if (sc->mlx_sgtable) 185 bus_dmamem_free(sc->mlx_sg_dmat, sc->mlx_sgtable, sc->mlx_sg_dmamap); 186 if (sc->mlx_sg_dmat) 187 bus_dma_tag_destroy(sc->mlx_sg_dmat); 188 189 /* disconnect the interrupt handler */ 190 if (sc->mlx_intr) 191 bus_teardown_intr(sc->mlx_dev, sc->mlx_irq, sc->mlx_intr); 192 if (sc->mlx_irq != NULL) 193 bus_release_resource(sc->mlx_dev, SYS_RES_IRQ, 0, sc->mlx_irq); 194 195 /* destroy the parent DMA tag */ 196 if (sc->mlx_parent_dmat) 197 bus_dma_tag_destroy(sc->mlx_parent_dmat); 198 199 /* release the register window mapping */ 200 if (sc->mlx_mem != NULL) 201 bus_release_resource(sc->mlx_dev, sc->mlx_mem_type, sc->mlx_mem_rid, sc->mlx_mem); 202 203 /* free controller enquiry data */ 204 if (sc->mlx_enq2 != NULL) 205 free(sc->mlx_enq2, M_DEVBUF); 206 207 /* destroy control device */ 208 if (sc->mlx_dev_t != (dev_t)NULL) 209 destroy_dev(sc->mlx_dev_t); 210} 211 212/******************************************************************************** 213 * Map the scatter/gather table into bus space 214 */ 215static void 216mlx_dma_map_sg(void *arg, bus_dma_segment_t *segs, int nseg, int error) 217{ 218 struct mlx_softc *sc = (struct mlx_softc *)arg; 219 220 debug_called(1); 221 222 /* save base of s/g table's address in bus space */ 223 sc->mlx_sgbusaddr = segs->ds_addr; 224} 225 226static int 227mlx_sglist_map(struct mlx_softc *sc) 228{ 229 size_t segsize; 230 int error, ncmd; 231 232 debug_called(1); 233 234 /* destroy any existing mappings */ 235 if (sc->mlx_sgtable) 236 bus_dmamem_free(sc->mlx_sg_dmat, sc->mlx_sgtable, sc->mlx_sg_dmamap); 237 if (sc->mlx_sg_dmat) 238 bus_dma_tag_destroy(sc->mlx_sg_dmat); 239 240 /* 241 * Create a single tag describing a region large enough to hold all of 242 * the s/g lists we will need. If we're called early on, we don't know how 243 * many commands we're going to be asked to support, so only allocate enough 244 * for a couple. 245 */ 246 if (sc->mlx_enq2 == NULL) { 247 ncmd = 2; 248 } else { 249 ncmd = sc->mlx_enq2->me_max_commands; 250 } 251 segsize = sizeof(struct mlx_sgentry) * MLX_NSEG * ncmd; 252 error = bus_dma_tag_create(sc->mlx_parent_dmat, /* parent */ 253 1, 0, /* alignment, boundary */ 254 BUS_SPACE_MAXADDR, /* lowaddr */ 255 BUS_SPACE_MAXADDR, /* highaddr */ 256 NULL, NULL, /* filter, filterarg */ 257 segsize, 1, /* maxsize, nsegments */ 258 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 259 0, /* flags */ 260 &sc->mlx_sg_dmat); 261 if (error != 0) { 262 device_printf(sc->mlx_dev, "can't allocate scatter/gather DMA tag\n"); 263 return(ENOMEM); 264 } 265 266 /* 267 * Allocate enough s/g maps for all commands and permanently map them into 268 * controller-visible space. 269 * 270 * XXX this assumes we can get enough space for all the s/g maps in one 271 * contiguous slab. We may need to switch to a more complex arrangement where 272 * we allocate in smaller chunks and keep a lookup table from slot to bus address. 273 */ 274 error = bus_dmamem_alloc(sc->mlx_sg_dmat, (void **)&sc->mlx_sgtable, BUS_DMA_NOWAIT, &sc->mlx_sg_dmamap); 275 if (error) { 276 device_printf(sc->mlx_dev, "can't allocate s/g table\n"); 277 return(ENOMEM); 278 } 279 bus_dmamap_load(sc->mlx_sg_dmat, sc->mlx_sg_dmamap, sc->mlx_sgtable, segsize, mlx_dma_map_sg, sc, 0); 280 return(0); 281} 282 283/******************************************************************************** 284 * Initialise the controller and softc 285 */ 286int 287mlx_attach(struct mlx_softc *sc) 288{ 289 struct mlx_enquiry_old *meo; 290 int rid, error, fwminor, hscode, hserror, hsparam1, hsparam2, hsmsg; 291 292 debug_called(1); 293 294 /* 295 * Initialise per-controller queues. 296 */ 297 TAILQ_INIT(&sc->mlx_work); 298 TAILQ_INIT(&sc->mlx_freecmds); 299 MLX_BIO_QINIT(sc->mlx_bioq); 300 301 /* 302 * Select accessor methods based on controller interface type. 303 */ 304 switch(sc->mlx_iftype) { 305 case MLX_IFTYPE_2: 306 case MLX_IFTYPE_3: 307 sc->mlx_tryqueue = mlx_v3_tryqueue; 308 sc->mlx_findcomplete = mlx_v3_findcomplete; 309 sc->mlx_intaction = mlx_v3_intaction; 310 sc->mlx_fw_handshake = mlx_v3_fw_handshake; 311 break; 312 case MLX_IFTYPE_4: 313 sc->mlx_tryqueue = mlx_v4_tryqueue; 314 sc->mlx_findcomplete = mlx_v4_findcomplete; 315 sc->mlx_intaction = mlx_v4_intaction; 316 sc->mlx_fw_handshake = mlx_v4_fw_handshake; 317 break; 318 case MLX_IFTYPE_5: 319 sc->mlx_tryqueue = mlx_v5_tryqueue; 320 sc->mlx_findcomplete = mlx_v5_findcomplete; 321 sc->mlx_intaction = mlx_v5_intaction; 322 sc->mlx_fw_handshake = mlx_v5_fw_handshake; 323 break; 324 default: 325 mlx_free(sc); 326 return(ENXIO); /* should never happen */ 327 } 328 329 /* disable interrupts before we start talking to the controller */ 330 sc->mlx_intaction(sc, MLX_INTACTION_DISABLE); 331 332 /* 333 * Wait for the controller to come ready, handshake with the firmware if required. 334 * This is typically only necessary on platforms where the controller BIOS does not 335 * run. 336 */ 337 hsmsg = 0; 338 DELAY(1000); 339 while ((hscode = sc->mlx_fw_handshake(sc, &hserror, &hsparam1, &hsparam2)) != 0) { 340 /* report first time around... */ 341 if (hsmsg == 0) { 342 device_printf(sc->mlx_dev, "controller initialisation in progress...\n"); 343 hsmsg = 1; 344 } 345 /* did we get a real message? */ 346 if (hscode == 2) { 347 hscode = mlx_fw_message(sc, hserror, hsparam1, hsparam2); 348 /* fatal initialisation error? */ 349 if (hscode != 0) { 350 mlx_free(sc); 351 return(ENXIO); 352 } 353 } 354 } 355 if (hsmsg == 1) 356 device_printf(sc->mlx_dev, "initialisation complete.\n"); 357 358 /* 359 * Allocate and connect our interrupt. 360 */ 361 rid = 0; 362 sc->mlx_irq = bus_alloc_resource(sc->mlx_dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); 363 if (sc->mlx_irq == NULL) { 364 device_printf(sc->mlx_dev, "can't allocate interrupt\n"); 365 mlx_free(sc); 366 return(ENXIO); 367 } 368 error = bus_setup_intr(sc->mlx_dev, sc->mlx_irq, INTR_TYPE_BIO | INTR_ENTROPY, mlx_intr, sc, &sc->mlx_intr); 369 if (error) { 370 device_printf(sc->mlx_dev, "can't set up interrupt\n"); 371 mlx_free(sc); 372 return(ENXIO); 373 } 374 375 /* 376 * Create DMA tag for mapping buffers into controller-addressable space. 377 */ 378 error = bus_dma_tag_create(sc->mlx_parent_dmat, /* parent */ 379 1, 0, /* alignment, boundary */ 380 BUS_SPACE_MAXADDR, /* lowaddr */ 381 BUS_SPACE_MAXADDR, /* highaddr */ 382 NULL, NULL, /* filter, filterarg */ 383 MAXBSIZE, MLX_NSEG, /* maxsize, nsegments */ 384 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 385 0, /* flags */ 386 &sc->mlx_buffer_dmat); 387 if (error != 0) { 388 device_printf(sc->mlx_dev, "can't allocate buffer DMA tag\n"); 389 mlx_free(sc); 390 return(ENOMEM); 391 } 392 393 /* 394 * Create some initial scatter/gather mappings so we can run the probe commands. 395 */ 396 error = mlx_sglist_map(sc); 397 if (error != 0) { 398 device_printf(sc->mlx_dev, "can't make initial s/g list mapping\n"); 399 mlx_free(sc); 400 return(error); 401 } 402 403 /* 404 * We don't (yet) know where the event log is up to. 405 */ 406 sc->mlx_currevent = -1; 407 408 /* 409 * Obtain controller feature information 410 */ 411 if ((sc->mlx_enq2 = mlx_enquire(sc, MLX_CMD_ENQUIRY2, sizeof(struct mlx_enquiry2), NULL)) == NULL) { 412 device_printf(sc->mlx_dev, "ENQUIRY2 failed\n"); 413 mlx_free(sc); 414 return(ENXIO); 415 } 416 417 /* 418 * Do quirk/feature related things. 419 */ 420 fwminor = (sc->mlx_enq2->me_firmware_id >> 8) & 0xff; 421 switch(sc->mlx_iftype) { 422 case MLX_IFTYPE_2: 423 /* These controllers don't report the firmware version in the ENQUIRY2 response */ 424 if ((meo = mlx_enquire(sc, MLX_CMD_ENQUIRY_OLD, sizeof(struct mlx_enquiry_old), NULL)) == NULL) { 425 device_printf(sc->mlx_dev, "ENQUIRY_OLD failed\n"); 426 mlx_free(sc); 427 return(ENXIO); 428 } 429 sc->mlx_enq2->me_firmware_id = ('0' << 24) | (0 << 16) | (meo->me_fwminor << 8) | meo->me_fwmajor; 430 free(meo, M_DEVBUF); 431 432 /* XXX require 2.42 or better (PCI) or 2.14 or better (EISA) */ 433 if (meo->me_fwminor < 42) { 434 device_printf(sc->mlx_dev, " *** WARNING *** This firmware revision is not recommended\n"); 435 device_printf(sc->mlx_dev, " *** WARNING *** Use revision 2.42 or later\n"); 436 } 437 break; 438 case MLX_IFTYPE_3: 439 /* XXX certify 3.52? */ 440 if (fwminor < 51) { 441 device_printf(sc->mlx_dev, " *** WARNING *** This firmware revision is not recommended\n"); 442 device_printf(sc->mlx_dev, " *** WARNING *** Use revision 3.51 or later\n"); 443 } 444 break; 445 case MLX_IFTYPE_4: 446 /* XXX certify firmware versions? */ 447 if (fwminor < 6) { 448 device_printf(sc->mlx_dev, " *** WARNING *** This firmware revision is not recommended\n"); 449 device_printf(sc->mlx_dev, " *** WARNING *** Use revision 4.06 or later\n"); 450 } 451 break; 452 case MLX_IFTYPE_5: 453 if (fwminor < 7) { 454 device_printf(sc->mlx_dev, " *** WARNING *** This firmware revision is not recommended\n"); 455 device_printf(sc->mlx_dev, " *** WARNING *** Use revision 5.07 or later\n"); 456 } 457 break; 458 default: 459 mlx_free(sc); 460 return(ENXIO); /* should never happen */ 461 } 462 463 /* 464 * Create the final scatter/gather mappings now that we have characterised the controller. 465 */ 466 error = mlx_sglist_map(sc); 467 if (error != 0) { 468 device_printf(sc->mlx_dev, "can't make final s/g list mapping\n"); 469 mlx_free(sc); 470 return(error); 471 } 472 473 /* 474 * No user-requested background operation is in progress. 475 */ 476 sc->mlx_background = 0; 477 sc->mlx_rebuildstat.rs_code = MLX_REBUILDSTAT_IDLE; 478 479 /* 480 * Create the control device. 481 */ 482 sc->mlx_dev_t = make_dev(&mlx_cdevsw, device_get_unit(sc->mlx_dev), UID_ROOT, GID_OPERATOR, 483 S_IRUSR | S_IWUSR, "mlx%d", device_get_unit(sc->mlx_dev)); 484 485 /* 486 * Start the timeout routine. 487 */ 488 sc->mlx_timeout = timeout(mlx_periodic, sc, hz); 489 490 /* print a little information about the controller */ 491 mlx_describe_controller(sc); 492 493 return(0); 494} 495 496/******************************************************************************** 497 * Locate disk resources and attach children to them. 498 */ 499void 500mlx_startup(struct mlx_softc *sc) 501{ 502 struct mlx_enq_sys_drive *mes; 503 struct mlx_sysdrive *dr; 504 int i, error; 505 506 debug_called(1); 507 508 /* 509 * Scan all the system drives and attach children for those that 510 * don't currently have them. 511 */ 512 mes = mlx_enquire(sc, MLX_CMD_ENQSYSDRIVE, sizeof(*mes) * MLX_MAXDRIVES, NULL); 513 if (mes == NULL) { 514 device_printf(sc->mlx_dev, "error fetching drive status\n"); 515 return; 516 } 517 518 /* iterate over drives returned */ 519 for (i = 0, dr = &sc->mlx_sysdrive[0]; 520 (i < MLX_MAXDRIVES) && (mes[i].sd_size != 0xffffffff); 521 i++, dr++) { 522 /* are we already attached to this drive? */ 523 if (dr->ms_disk == 0) { 524 /* pick up drive information */ 525 dr->ms_size = mes[i].sd_size; 526 dr->ms_raidlevel = mes[i].sd_raidlevel & 0xf; 527 dr->ms_state = mes[i].sd_state; 528 529 /* generate geometry information */ 530 if (sc->mlx_geom == MLX_GEOM_128_32) { 531 dr->ms_heads = 128; 532 dr->ms_sectors = 32; 533 dr->ms_cylinders = dr->ms_size / (128 * 32); 534 } else { /* MLX_GEOM_255/63 */ 535 dr->ms_heads = 255; 536 dr->ms_sectors = 63; 537 dr->ms_cylinders = dr->ms_size / (255 * 63); 538 } 539 dr->ms_disk = device_add_child(sc->mlx_dev, /*"mlxd"*/NULL, -1); 540 if (dr->ms_disk == 0) 541 device_printf(sc->mlx_dev, "device_add_child failed\n"); 542 device_set_ivars(dr->ms_disk, dr); 543 } 544 } 545 free(mes, M_DEVBUF); 546 if ((error = bus_generic_attach(sc->mlx_dev)) != 0) 547 device_printf(sc->mlx_dev, "bus_generic_attach returned %d", error); 548 549 /* mark controller back up */ 550 sc->mlx_state &= ~MLX_STATE_SHUTDOWN; 551 552 /* enable interrupts */ 553 sc->mlx_intaction(sc, MLX_INTACTION_ENABLE); 554} 555 556/******************************************************************************** 557 * Disconnect from the controller completely, in preparation for unload. 558 */ 559int 560mlx_detach(device_t dev) 561{ 562 struct mlx_softc *sc = device_get_softc(dev); 563 struct mlxd_softc *mlxd; 564 int i, s, error; 565 566 debug_called(1); 567 568 error = EBUSY; 569 s = splbio(); 570 if (sc->mlx_state & MLX_STATE_OPEN) 571 goto out; 572 573 for (i = 0; i < MLX_MAXDRIVES; i++) { 574 if (sc->mlx_sysdrive[i].ms_disk != 0) { 575 mlxd = device_get_softc(sc->mlx_sysdrive[i].ms_disk); 576 if (mlxd->mlxd_flags & MLXD_OPEN) { /* drive is mounted, abort detach */ 577 device_printf(sc->mlx_sysdrive[i].ms_disk, "still open, can't detach\n"); 578 goto out; 579 } 580 } 581 } 582 if ((error = mlx_shutdown(dev))) 583 goto out; 584 585 mlx_free(sc); 586 587 error = 0; 588 out: 589 splx(s); 590 return(error); 591} 592 593/******************************************************************************** 594 * Bring the controller down to a dormant state and detach all child devices. 595 * 596 * This function is called before detach, system shutdown, or before performing 597 * an operation which may add or delete system disks. (Call mlx_startup to 598 * resume normal operation.) 599 * 600 * Note that we can assume that the bioq on the controller is empty, as we won't 601 * allow shutdown if any device is open. 602 */ 603int 604mlx_shutdown(device_t dev) 605{ 606 struct mlx_softc *sc = device_get_softc(dev); 607 int i, s, error; 608 609 debug_called(1); 610 611 s = splbio(); 612 error = 0; 613 614 sc->mlx_state |= MLX_STATE_SHUTDOWN; 615 sc->mlx_intaction(sc, MLX_INTACTION_DISABLE); 616 617 /* flush controller */ 618 device_printf(sc->mlx_dev, "flushing cache..."); 619 if (mlx_flush(sc)) { 620 printf("failed\n"); 621 } else { 622 printf("done\n"); 623 } 624 625 /* delete all our child devices */ 626 for (i = 0; i < MLX_MAXDRIVES; i++) { 627 if (sc->mlx_sysdrive[i].ms_disk != 0) { 628 if ((error = device_delete_child(sc->mlx_dev, sc->mlx_sysdrive[i].ms_disk)) != 0) 629 goto out; 630 sc->mlx_sysdrive[i].ms_disk = 0; 631 } 632 } 633 634 out: 635 splx(s); 636 return(error); 637} 638 639/******************************************************************************** 640 * Bring the controller to a quiescent state, ready for system suspend. 641 */ 642int 643mlx_suspend(device_t dev) 644{ 645 struct mlx_softc *sc = device_get_softc(dev); 646 int s; 647 648 debug_called(1); 649 650 s = splbio(); 651 sc->mlx_state |= MLX_STATE_SUSPEND; 652 653 /* flush controller */ 654 device_printf(sc->mlx_dev, "flushing cache..."); 655 printf("%s\n", mlx_flush(sc) ? "failed" : "done"); 656 657 sc->mlx_intaction(sc, MLX_INTACTION_DISABLE); 658 splx(s); 659 660 return(0); 661} 662 663/******************************************************************************** 664 * Bring the controller back to a state ready for operation. 665 */ 666int 667mlx_resume(device_t dev) 668{ 669 struct mlx_softc *sc = device_get_softc(dev); 670 671 debug_called(1); 672 673 sc->mlx_state &= ~MLX_STATE_SUSPEND; 674 sc->mlx_intaction(sc, MLX_INTACTION_ENABLE); 675 676 return(0); 677} 678 679/******************************************************************************* 680 * Take an interrupt, or be poked by other code to look for interrupt-worthy 681 * status. 682 */ 683void 684mlx_intr(void *arg) 685{ 686 struct mlx_softc *sc = (struct mlx_softc *)arg; 687 688 debug_called(1); 689 690 /* collect finished commands, queue anything waiting */ 691 mlx_done(sc); 692}; 693 694/******************************************************************************* 695 * Receive a buf structure from a child device and queue it on a particular 696 * disk resource, then poke the disk resource to start as much work as it can. 697 */ 698int 699mlx_submit_buf(struct mlx_softc *sc, mlx_bio *bp) 700{ 701 int s; 702 703 debug_called(1); 704 705 s = splbio(); 706 MLX_BIO_QINSERT(sc->mlx_bioq, bp); 707 sc->mlx_waitbufs++; 708 splx(s); 709 mlx_startio(sc); 710 return(0); 711} 712 713/******************************************************************************** 714 * Accept an open operation on the control device. 715 */ 716int 717mlx_open(dev_t dev, int flags, int fmt, struct proc *p) 718{ 719 int unit = minor(dev); 720 struct mlx_softc *sc = devclass_get_softc(mlx_devclass, unit); 721 722 sc->mlx_state |= MLX_STATE_OPEN; 723 return(0); 724} 725 726/******************************************************************************** 727 * Accept the last close on the control device. 728 */ 729int 730mlx_close(dev_t dev, int flags, int fmt, struct proc *p) 731{ 732 int unit = minor(dev); 733 struct mlx_softc *sc = devclass_get_softc(mlx_devclass, unit); 734 735 sc->mlx_state &= ~MLX_STATE_OPEN; 736 return (0); 737} 738 739/******************************************************************************** 740 * Handle controller-specific control operations. 741 */ 742int 743mlx_ioctl(dev_t dev, u_long cmd, caddr_t addr, int32_t flag, struct proc *p) 744{ 745 int unit = minor(dev); 746 struct mlx_softc *sc = devclass_get_softc(mlx_devclass, unit); 747 struct mlx_rebuild_request *rb = (struct mlx_rebuild_request *)addr; 748 struct mlx_rebuild_status *rs = (struct mlx_rebuild_status *)addr; 749 int *arg = (int *)addr; 750 struct mlx_pause *mp; 751 struct mlx_sysdrive *dr; 752 struct mlxd_softc *mlxd; 753 int i, error; 754 755 switch(cmd) { 756 /* 757 * Enumerate connected system drives; returns the first system drive's 758 * unit number if *arg is -1, or the next unit after *arg if it's 759 * a valid unit on this controller. 760 */ 761 case MLX_NEXT_CHILD: 762 /* search system drives */ 763 for (i = 0; i < MLX_MAXDRIVES; i++) { 764 /* is this one attached? */ 765 if (sc->mlx_sysdrive[i].ms_disk != 0) { 766 /* looking for the next one we come across? */ 767 if (*arg == -1) { 768 *arg = device_get_unit(sc->mlx_sysdrive[0].ms_disk); 769 return(0); 770 } 771 /* we want the one after this one */ 772 if (*arg == device_get_unit(sc->mlx_sysdrive[i].ms_disk)) 773 *arg = -1; 774 } 775 } 776 return(ENOENT); 777 778 /* 779 * Scan the controller to see whether new drives have appeared. 780 */ 781 case MLX_RESCAN_DRIVES: 782 mlx_startup(sc); 783 return(0); 784 785 /* 786 * Disconnect from the specified drive; it may be about to go 787 * away. 788 */ 789 case MLX_DETACH_DRIVE: /* detach one drive */ 790 791 if (((dr = mlx_findunit(sc, *arg)) == NULL) || 792 ((mlxd = device_get_softc(dr->ms_disk)) == NULL)) 793 return(ENOENT); 794 795 device_printf(dr->ms_disk, "detaching..."); 796 error = 0; 797 if (mlxd->mlxd_flags & MLXD_OPEN) { 798 error = EBUSY; 799 goto detach_out; 800 } 801 802 /* flush controller */ 803 if (mlx_flush(sc)) { 804 error = EBUSY; 805 goto detach_out; 806 } 807 808 /* nuke drive */ 809 if ((error = device_delete_child(sc->mlx_dev, dr->ms_disk)) != 0) 810 goto detach_out; 811 dr->ms_disk = 0; 812 813 detach_out: 814 if (error) { 815 printf("failed\n"); 816 } else { 817 printf("done\n"); 818 } 819 return(error); 820 821 /* 822 * Pause one or more SCSI channels for a period of time, to assist 823 * in the process of hot-swapping devices. 824 * 825 * Note that at least the 3.51 firmware on the DAC960PL doesn't seem 826 * to do this right. 827 */ 828 case MLX_PAUSE_CHANNEL: /* schedule a channel pause */ 829 /* Does this command work on this firmware? */ 830 if (!(sc->mlx_feature & MLX_FEAT_PAUSEWORKS)) 831 return(EOPNOTSUPP); 832 833 mp = (struct mlx_pause *)addr; 834 if ((mp->mp_which == MLX_PAUSE_CANCEL) && (sc->mlx_pause.mp_when != 0)) { 835 /* cancel a pending pause operation */ 836 sc->mlx_pause.mp_which = 0; 837 } else { 838 /* fix for legal channels */ 839 mp->mp_which &= ((1 << sc->mlx_enq2->me_actual_channels) -1); 840 /* check time values */ 841 if ((mp->mp_when < 0) || (mp->mp_when > 3600)) 842 return(EINVAL); 843 if ((mp->mp_howlong < 1) || (mp->mp_howlong > (0xf * 30))) 844 return(EINVAL); 845 846 /* check for a pause currently running */ 847 if ((sc->mlx_pause.mp_which != 0) && (sc->mlx_pause.mp_when == 0)) 848 return(EBUSY); 849 850 /* looks ok, go with it */ 851 sc->mlx_pause.mp_which = mp->mp_which; 852 sc->mlx_pause.mp_when = time_second + mp->mp_when; 853 sc->mlx_pause.mp_howlong = sc->mlx_pause.mp_when + mp->mp_howlong; 854 } 855 return(0); 856 857 /* 858 * Accept a command passthrough-style. 859 */ 860 case MLX_COMMAND: 861 return(mlx_user_command(sc, (struct mlx_usercommand *)addr)); 862 863 /* 864 * Start a rebuild on a given SCSI disk 865 */ 866 case MLX_REBUILDASYNC: 867 if (sc->mlx_background != 0) { 868 rb->rr_status = 0x0106; 869 return(EBUSY); 870 } 871 rb->rr_status = mlx_rebuild(sc, rb->rr_channel, rb->rr_target); 872 switch (rb->rr_status) { 873 case 0: 874 error = 0; 875 break; 876 case 0x10000: 877 error = ENOMEM; /* couldn't set up the command */ 878 break; 879 case 0x0002: 880 error = EBUSY; 881 break; 882 case 0x0104: 883 error = EIO; 884 break; 885 case 0x0105: 886 error = ERANGE; 887 break; 888 case 0x0106: 889 error = EBUSY; 890 break; 891 default: 892 error = EINVAL; 893 break; 894 } 895 if (error == 0) 896 sc->mlx_background = MLX_BACKGROUND_REBUILD; 897 return(error); 898 899 /* 900 * Get the status of the current rebuild or consistency check. 901 */ 902 case MLX_REBUILDSTAT: 903 *rs = sc->mlx_rebuildstat; 904 return(0); 905 906 /* 907 * Return the per-controller system drive number matching the 908 * disk device number in (arg), if it happens to belong to us. 909 */ 910 case MLX_GET_SYSDRIVE: 911 error = ENOENT; 912 mlxd = (struct mlxd_softc *)devclass_get_softc(mlxd_devclass, *arg); 913 if ((mlxd != NULL) && (mlxd->mlxd_drive >= sc->mlx_sysdrive) && 914 (mlxd->mlxd_drive < (sc->mlx_sysdrive + MLX_MAXDRIVES))) { 915 error = 0; 916 *arg = mlxd->mlxd_drive - sc->mlx_sysdrive; 917 } 918 return(error); 919 920 default: 921 return(ENOTTY); 922 } 923} 924 925/******************************************************************************** 926 * Handle operations requested by a System Drive connected to this controller. 927 */ 928int 929mlx_submit_ioctl(struct mlx_softc *sc, struct mlx_sysdrive *drive, u_long cmd, 930 caddr_t addr, int32_t flag, struct proc *p) 931{ 932 int *arg = (int *)addr; 933 int error, result; 934 935 switch(cmd) { 936 /* 937 * Return the current status of this drive. 938 */ 939 case MLXD_STATUS: 940 *arg = drive->ms_state; 941 return(0); 942 943 /* 944 * Start a background consistency check on this drive. 945 */ 946 case MLXD_CHECKASYNC: /* start a background consistency check */ 947 if (sc->mlx_background != 0) { 948 *arg = 0x0106; 949 return(EBUSY); 950 } 951 result = mlx_check(sc, drive - &sc->mlx_sysdrive[0]); 952 switch (result) { 953 case 0: 954 error = 0; 955 break; 956 case 0x10000: 957 error = ENOMEM; /* couldn't set up the command */ 958 break; 959 case 0x0002: 960 error = EIO; 961 break; 962 case 0x0105: 963 error = ERANGE; 964 break; 965 case 0x0106: 966 error = EBUSY; 967 break; 968 default: 969 error = EINVAL; 970 break; 971 } 972 if (error == 0) 973 sc->mlx_background = MLX_BACKGROUND_CHECK; 974 *arg = result; 975 return(error); 976 977 } 978 return(ENOIOCTL); 979} 980 981 982/******************************************************************************** 983 ******************************************************************************** 984 Status Monitoring 985 ******************************************************************************** 986 ********************************************************************************/ 987 988/******************************************************************************** 989 * Fire off commands to periodically check the status of connected drives. 990 */ 991static void 992mlx_periodic(void *data) 993{ 994 struct mlx_softc *sc = (struct mlx_softc *)data; 995 996 debug_called(1); 997 998 /* 999 * Run a bus pause? 1000 */ 1001 if ((sc->mlx_pause.mp_which != 0) && 1002 (sc->mlx_pause.mp_when > 0) && 1003 (time_second >= sc->mlx_pause.mp_when)){ 1004 1005 mlx_pause_action(sc); /* pause is running */ 1006 sc->mlx_pause.mp_when = 0; 1007 sysbeep(500, hz); 1008 1009 /* 1010 * Bus pause still running? 1011 */ 1012 } else if ((sc->mlx_pause.mp_which != 0) && 1013 (sc->mlx_pause.mp_when == 0)) { 1014 1015 /* time to stop bus pause? */ 1016 if (time_second >= sc->mlx_pause.mp_howlong) { 1017 mlx_pause_action(sc); 1018 sc->mlx_pause.mp_which = 0; /* pause is complete */ 1019 sysbeep(500, hz); 1020 } else { 1021 sysbeep((time_second % 5) * 100 + 500, hz/8); 1022 } 1023 1024 /* 1025 * Run normal periodic activities? 1026 */ 1027 } else if (time_second > (sc->mlx_lastpoll + 10)) { 1028 sc->mlx_lastpoll = time_second; 1029 1030 /* 1031 * Check controller status. 1032 * 1033 * XXX Note that this may not actually launch a command in situations of high load. 1034 */ 1035 mlx_enquire(sc, (sc->mlx_iftype == MLX_IFTYPE_2) ? MLX_CMD_ENQUIRY_OLD : MLX_CMD_ENQUIRY, 1036 imax(sizeof(struct mlx_enquiry), sizeof(struct mlx_enquiry_old)), mlx_periodic_enquiry); 1037 1038 /* 1039 * Check system drive status. 1040 * 1041 * XXX This might be better left to event-driven detection, eg. I/O to an offline 1042 * drive will detect it's offline, rebuilds etc. should detect the drive is back 1043 * online. 1044 */ 1045 mlx_enquire(sc, MLX_CMD_ENQSYSDRIVE, sizeof(struct mlx_enq_sys_drive) * MLX_MAXDRIVES, 1046 mlx_periodic_enquiry); 1047 1048 } 1049 1050 /* get drive rebuild/check status */ 1051 /* XXX should check sc->mlx_background if this is only valid while in progress */ 1052 mlx_enquire(sc, MLX_CMD_REBUILDSTAT, sizeof(struct mlx_rebuild_stat), mlx_periodic_rebuild); 1053 1054 /* deal with possibly-missed interrupts and timed-out commands */ 1055 mlx_done(sc); 1056 1057 /* reschedule another poll next second or so */ 1058 sc->mlx_timeout = timeout(mlx_periodic, sc, hz); 1059} 1060 1061/******************************************************************************** 1062 * Handle the result of an ENQUIRY command instigated by periodic status polling. 1063 */ 1064static void 1065mlx_periodic_enquiry(struct mlx_command *mc) 1066{ 1067 struct mlx_softc *sc = mc->mc_sc; 1068 1069 debug_called(1); 1070 1071 /* Command completed OK? */ 1072 if (mc->mc_status != 0) { 1073 device_printf(sc->mlx_dev, "periodic enquiry failed - %s\n", mlx_diagnose_command(mc)); 1074 goto out; 1075 } 1076 1077 /* respond to command */ 1078 switch(mc->mc_mailbox[0]) { 1079 /* 1080 * This is currently a bit fruitless, as we don't know how to extract the eventlog 1081 * pointer yet. 1082 */ 1083 case MLX_CMD_ENQUIRY_OLD: 1084 { 1085 struct mlx_enquiry *me = (struct mlx_enquiry *)mc->mc_data; 1086 struct mlx_enquiry_old *meo = (struct mlx_enquiry_old *)mc->mc_data; 1087 int i; 1088 1089 /* convert data in-place to new format */ 1090 for (i = (sizeof(me->me_dead) / sizeof(me->me_dead[0])) - 1; i >= 0; i--) { 1091 me->me_dead[i].dd_chan = meo->me_dead[i].dd_chan; 1092 me->me_dead[i].dd_targ = meo->me_dead[i].dd_targ; 1093 } 1094 me->me_misc_flags = 0; 1095 me->me_rebuild_count = meo->me_rebuild_count; 1096 me->me_dead_count = meo->me_dead_count; 1097 me->me_critical_sd_count = meo->me_critical_sd_count; 1098 me->me_event_log_seq_num = 0; 1099 me->me_offline_sd_count = meo->me_offline_sd_count; 1100 me->me_max_commands = meo->me_max_commands; 1101 me->me_rebuild_flag = meo->me_rebuild_flag; 1102 me->me_fwmajor = meo->me_fwmajor; 1103 me->me_fwminor = meo->me_fwminor; 1104 me->me_status_flags = meo->me_status_flags; 1105 me->me_flash_age = meo->me_flash_age; 1106 for (i = (sizeof(me->me_drvsize) / sizeof(me->me_drvsize[0])) - 1; i >= 0; i--) { 1107 if (i > ((sizeof(meo->me_drvsize) / sizeof(meo->me_drvsize[0])) - 1)) { 1108 me->me_drvsize[i] = 0; /* drive beyond supported range */ 1109 } else { 1110 me->me_drvsize[i] = meo->me_drvsize[i]; 1111 } 1112 } 1113 me->me_num_sys_drvs = meo->me_num_sys_drvs; 1114 } 1115 /* FALLTHROUGH */ 1116 1117 /* 1118 * Generic controller status update. We could do more with this than just 1119 * checking the event log. 1120 */ 1121 case MLX_CMD_ENQUIRY: 1122 { 1123 struct mlx_enquiry *me = (struct mlx_enquiry *)mc->mc_data; 1124 1125 if (sc->mlx_currevent == -1) { 1126 /* initialise our view of the event log */ 1127 sc->mlx_currevent = sc->mlx_lastevent = me->me_event_log_seq_num; 1128 } else if ((me->me_event_log_seq_num != sc->mlx_lastevent) && !(sc->mlx_flags & MLX_EVENTLOG_BUSY)) { 1129 /* record where current events are up to */ 1130 sc->mlx_currevent = me->me_event_log_seq_num; 1131 debug(1, "event log pointer was %d, now %d\n", sc->mlx_lastevent, sc->mlx_currevent); 1132 1133 /* mark the event log as busy */ 1134 atomic_set_int(&sc->mlx_flags, MLX_EVENTLOG_BUSY); 1135 1136 /* drain new eventlog entries */ 1137 mlx_periodic_eventlog_poll(sc); 1138 } 1139 break; 1140 } 1141 case MLX_CMD_ENQSYSDRIVE: 1142 { 1143 struct mlx_enq_sys_drive *mes = (struct mlx_enq_sys_drive *)mc->mc_data; 1144 struct mlx_sysdrive *dr; 1145 int i; 1146 1147 for (i = 0, dr = &sc->mlx_sysdrive[0]; 1148 (i < MLX_MAXDRIVES) && (mes[i].sd_size != 0xffffffff); 1149 i++) { 1150 1151 /* has state been changed by controller? */ 1152 if (dr->ms_state != mes[i].sd_state) { 1153 switch(mes[i].sd_state) { 1154 case MLX_SYSD_OFFLINE: 1155 device_printf(dr->ms_disk, "drive offline\n"); 1156 break; 1157 case MLX_SYSD_ONLINE: 1158 device_printf(dr->ms_disk, "drive online\n"); 1159 break; 1160 case MLX_SYSD_CRITICAL: 1161 device_printf(dr->ms_disk, "drive critical\n"); 1162 break; 1163 } 1164 /* save new state */ 1165 dr->ms_state = mes[i].sd_state; 1166 } 1167 } 1168 break; 1169 } 1170 default: 1171 device_printf(sc->mlx_dev, "%s: unknown command 0x%x", __FUNCTION__, mc->mc_mailbox[0]); 1172 break; 1173 } 1174 1175 out: 1176 free(mc->mc_data, M_DEVBUF); 1177 mlx_releasecmd(mc); 1178} 1179 1180/******************************************************************************** 1181 * Instigate a poll for one event log message on (sc). 1182 * We only poll for one message at a time, to keep our command usage down. 1183 */ 1184static void 1185mlx_periodic_eventlog_poll(struct mlx_softc *sc) 1186{ 1187 struct mlx_command *mc; 1188 void *result = NULL; 1189 int error; 1190 1191 debug_called(1); 1192 1193 /* get ourselves a command buffer */ 1194 error = 1; 1195 if ((mc = mlx_alloccmd(sc)) == NULL) 1196 goto out; 1197 /* allocate the response structure */ 1198 if ((result = malloc(/*sizeof(struct mlx_eventlog_entry)*/1024, M_DEVBUF, M_NOWAIT)) == NULL) 1199 goto out; 1200 /* get a command slot */ 1201 if (mlx_getslot(mc)) 1202 goto out; 1203 1204 /* map the command so the controller can see it */ 1205 mc->mc_data = result; 1206 mc->mc_length = /*sizeof(struct mlx_eventlog_entry)*/1024; 1207 mlx_mapcmd(mc); 1208 1209 /* build the command to get one entry */ 1210 mlx_make_type3(mc, MLX_CMD_LOGOP, MLX_LOGOP_GET, 1, sc->mlx_lastevent, 0, 0, mc->mc_dataphys, 0); 1211 mc->mc_complete = mlx_periodic_eventlog_respond; 1212 mc->mc_private = mc; 1213 1214 /* start the command */ 1215 if ((error = mlx_start(mc)) != 0) 1216 goto out; 1217 1218 error = 0; /* success */ 1219 out: 1220 if (error != 0) { 1221 if (mc != NULL) 1222 mlx_releasecmd(mc); 1223 if (result != NULL) 1224 free(result, M_DEVBUF); 1225 } 1226} 1227 1228/******************************************************************************** 1229 * Handle the result of polling for a log message, generate diagnostic output. 1230 * If this wasn't the last message waiting for us, we'll go collect another. 1231 */ 1232static char *mlx_sense_messages[] = { 1233 "because write recovery failed", 1234 "because of SCSI bus reset failure", 1235 "because of double check condition", 1236 "because it was removed", 1237 "because of gross error on SCSI chip", 1238 "because of bad tag returned from drive", 1239 "because of timeout on SCSI command", 1240 "because of reset SCSI command issued from system", 1241 "because busy or parity error count exceeded limit", 1242 "because of 'kill drive' command from system", 1243 "because of selection timeout", 1244 "due to SCSI phase sequence error", 1245 "due to unknown status" 1246}; 1247 1248static void 1249mlx_periodic_eventlog_respond(struct mlx_command *mc) 1250{ 1251 struct mlx_softc *sc = mc->mc_sc; 1252 struct mlx_eventlog_entry *el = (struct mlx_eventlog_entry *)mc->mc_data; 1253 char *reason; 1254 1255 debug_called(1); 1256 1257 sc->mlx_lastevent++; /* next message... */ 1258 if (mc->mc_status == 0) { 1259 1260 /* handle event log message */ 1261 switch(el->el_type) { 1262 /* 1263 * This is the only sort of message we understand at the moment. 1264 * The tests here are probably incomplete. 1265 */ 1266 case MLX_LOGMSG_SENSE: /* sense data */ 1267 /* Mylex vendor-specific message indicating a drive was killed? */ 1268 if ((el->el_sensekey == 9) && 1269 (el->el_asc == 0x80)) { 1270 if (el->el_asq < (sizeof(mlx_sense_messages) / sizeof(mlx_sense_messages[0]))) { 1271 reason = mlx_sense_messages[el->el_asq]; 1272 } else { 1273 reason = "for unknown reason"; 1274 } 1275 device_printf(sc->mlx_dev, "physical drive %d:%d killed %s\n", 1276 el->el_channel, el->el_target, reason); 1277 } 1278 /* SCSI drive was reset? */ 1279 if ((el->el_sensekey == 6) && (el->el_asc == 0x29)) { 1280 device_printf(sc->mlx_dev, "physical drive %d:%d reset\n", 1281 el->el_channel, el->el_target); 1282 } 1283 /* SCSI drive error? */ 1284 if (!((el->el_sensekey == 0) || 1285 ((el->el_sensekey == 2) && 1286 (el->el_asc == 0x04) && 1287 ((el->el_asq == 0x01) || 1288 (el->el_asq == 0x02))))) { 1289 device_printf(sc->mlx_dev, "physical drive %d:%d error log: sense = %d asc = %x asq = %x\n", 1290 el->el_channel, el->el_target, el->el_sensekey, el->el_asc, el->el_asq); 1291 device_printf(sc->mlx_dev, " info %4D csi %4D\n", el->el_information, ":", el->el_csi, ":"); 1292 } 1293 break; 1294 1295 default: 1296 device_printf(sc->mlx_dev, "unknown log message type 0x%x\n", el->el_type); 1297 break; 1298 } 1299 } else { 1300 device_printf(sc->mlx_dev, "error reading message log - %s\n", mlx_diagnose_command(mc)); 1301 /* give up on all the outstanding messages, as we may have come unsynched */ 1302 sc->mlx_lastevent = sc->mlx_currevent; 1303 } 1304 1305 /* dispose of command and data */ 1306 free(mc->mc_data, M_DEVBUF); 1307 mlx_releasecmd(mc); 1308 1309 /* is there another message to obtain? */ 1310 if (sc->mlx_lastevent != sc->mlx_currevent) { 1311 mlx_periodic_eventlog_poll(sc); 1312 } else { 1313 /* clear log-busy status */ 1314 atomic_clear_int(&sc->mlx_flags, MLX_EVENTLOG_BUSY); 1315 } 1316} 1317 1318/******************************************************************************** 1319 * Handle check/rebuild operations in progress. 1320 */ 1321static void 1322mlx_periodic_rebuild(struct mlx_command *mc) 1323{ 1324 struct mlx_softc *sc = mc->mc_sc; 1325 struct mlx_rebuild_status *mr = (struct mlx_rebuild_status *)mc->mc_data; 1326 1327 switch(mc->mc_status) { 1328 case 0: /* operation running, update stats */ 1329 sc->mlx_rebuildstat = *mr; 1330 1331 /* spontaneous rebuild/check? */ 1332 if (sc->mlx_background == 0) { 1333 sc->mlx_background = MLX_BACKGROUND_SPONTANEOUS; 1334 device_printf(sc->mlx_dev, "background check/rebuild operation started\n"); 1335 } 1336 break; 1337 1338 case 0x0105: /* nothing running, finalise stats and report */ 1339 switch(sc->mlx_background) { 1340 case MLX_BACKGROUND_CHECK: 1341 device_printf(sc->mlx_dev, "consistency check completed\n"); /* XXX print drive? */ 1342 break; 1343 case MLX_BACKGROUND_REBUILD: 1344 device_printf(sc->mlx_dev, "drive rebuild completed\n"); /* XXX print channel/target? */ 1345 break; 1346 case MLX_BACKGROUND_SPONTANEOUS: 1347 default: 1348 /* if we have previously been non-idle, report the transition */ 1349 if (sc->mlx_rebuildstat.rs_code != MLX_REBUILDSTAT_IDLE) { 1350 device_printf(sc->mlx_dev, "background check/rebuild operation completed\n"); 1351 } 1352 } 1353 sc->mlx_background = 0; 1354 sc->mlx_rebuildstat.rs_code = MLX_REBUILDSTAT_IDLE; 1355 break; 1356 } 1357 free(mc->mc_data, M_DEVBUF); 1358 mlx_releasecmd(mc); 1359} 1360 1361/******************************************************************************** 1362 ******************************************************************************** 1363 Channel Pause 1364 ******************************************************************************** 1365 ********************************************************************************/ 1366 1367/******************************************************************************** 1368 * It's time to perform a channel pause action for (sc), either start or stop 1369 * the pause. 1370 */ 1371static void 1372mlx_pause_action(struct mlx_softc *sc) 1373{ 1374 struct mlx_command *mc; 1375 int failsafe, i, command; 1376 1377 /* What are we doing here? */ 1378 if (sc->mlx_pause.mp_when == 0) { 1379 command = MLX_CMD_STARTCHANNEL; 1380 failsafe = 0; 1381 1382 } else { 1383 command = MLX_CMD_STOPCHANNEL; 1384 1385 /* 1386 * Channels will always start again after the failsafe period, 1387 * which is specified in multiples of 30 seconds. 1388 * This constrains us to a maximum pause of 450 seconds. 1389 */ 1390 failsafe = ((sc->mlx_pause.mp_howlong - time_second) + 5) / 30; 1391 if (failsafe > 0xf) { 1392 failsafe = 0xf; 1393 sc->mlx_pause.mp_howlong = time_second + (0xf * 30) - 5; 1394 } 1395 } 1396 1397 /* build commands for every channel requested */ 1398 for (i = 0; i < sc->mlx_enq2->me_actual_channels; i++) { 1399 if ((1 << i) & sc->mlx_pause.mp_which) { 1400 1401 /* get ourselves a command buffer */ 1402 if ((mc = mlx_alloccmd(sc)) == NULL) 1403 goto fail; 1404 /* get a command slot */ 1405 mc->mc_flags |= MLX_CMD_PRIORITY; 1406 if (mlx_getslot(mc)) 1407 goto fail; 1408 1409 /* build the command */ 1410 mlx_make_type2(mc, command, (failsafe << 4) | i, 0, 0, 0, 0, 0, 0, 0); 1411 mc->mc_complete = mlx_pause_done; 1412 mc->mc_private = sc; /* XXX not needed */ 1413 if (mlx_start(mc)) 1414 goto fail; 1415 /* command submitted OK */ 1416 return; 1417 1418 fail: 1419 device_printf(sc->mlx_dev, "%s failed for channel %d\n", 1420 command == MLX_CMD_STOPCHANNEL ? "pause" : "resume", i); 1421 if (mc != NULL) 1422 mlx_releasecmd(mc); 1423 } 1424 } 1425} 1426 1427static void 1428mlx_pause_done(struct mlx_command *mc) 1429{ 1430 struct mlx_softc *sc = mc->mc_sc; 1431 int command = mc->mc_mailbox[0]; 1432 int channel = mc->mc_mailbox[2] & 0xf; 1433 1434 if (mc->mc_status != 0) { 1435 device_printf(sc->mlx_dev, "%s command failed - %s\n", 1436 command == MLX_CMD_STOPCHANNEL ? "pause" : "resume", mlx_diagnose_command(mc)); 1437 } else if (command == MLX_CMD_STOPCHANNEL) { 1438 device_printf(sc->mlx_dev, "channel %d pausing for %ld seconds\n", 1439 channel, (long)(sc->mlx_pause.mp_howlong - time_second)); 1440 } else { 1441 device_printf(sc->mlx_dev, "channel %d resuming\n", channel); 1442 } 1443 mlx_releasecmd(mc); 1444} 1445 1446/******************************************************************************** 1447 ******************************************************************************** 1448 Command Submission 1449 ******************************************************************************** 1450 ********************************************************************************/ 1451 1452/******************************************************************************** 1453 * Perform an Enquiry command using a type-3 command buffer and a return a single 1454 * linear result buffer. If the completion function is specified, it will 1455 * be called with the completed command (and the result response will not be 1456 * valid until that point). Otherwise, the command will either be busy-waited 1457 * for (interrupts not enabled), or slept for. 1458 */ 1459static void * 1460mlx_enquire(struct mlx_softc *sc, int command, size_t bufsize, void (* complete)(struct mlx_command *mc)) 1461{ 1462 struct mlx_command *mc; 1463 void *result; 1464 int error; 1465 1466 debug_called(1); 1467 1468 /* get ourselves a command buffer */ 1469 error = 1; 1470 result = NULL; 1471 if ((mc = mlx_alloccmd(sc)) == NULL) 1472 goto out; 1473 /* allocate the response structure */ 1474 if ((result = malloc(bufsize, M_DEVBUF, M_NOWAIT)) == NULL) 1475 goto out; 1476 /* get a command slot */ 1477 mc->mc_flags |= MLX_CMD_PRIORITY | MLX_CMD_DATAOUT; 1478 if (mlx_getslot(mc)) 1479 goto out; 1480 1481 /* map the command so the controller can see it */ 1482 mc->mc_data = result; 1483 mc->mc_length = bufsize; 1484 mlx_mapcmd(mc); 1485 1486 /* build an enquiry command */ 1487 mlx_make_type2(mc, command, 0, 0, 0, 0, 0, 0, mc->mc_dataphys, 0); 1488 1489 /* do we want a completion callback? */ 1490 if (complete != NULL) { 1491 mc->mc_complete = complete; 1492 mc->mc_private = mc; 1493 if ((error = mlx_start(mc)) != 0) 1494 goto out; 1495 } else { 1496 /* run the command in either polled or wait mode */ 1497 if ((sc->mlx_state & MLX_STATE_INTEN) ? mlx_wait_command(mc) : mlx_poll_command(mc)) 1498 goto out; 1499 1500 /* command completed OK? */ 1501 if (mc->mc_status != 0) { 1502 device_printf(sc->mlx_dev, "ENQUIRY failed - %s\n", mlx_diagnose_command(mc)); 1503 goto out; 1504 } 1505 } 1506 error = 0; /* success */ 1507 out: 1508 /* we got a command, but nobody else will free it */ 1509 if ((complete == NULL) && (mc != NULL)) 1510 mlx_releasecmd(mc); 1511 /* we got an error, and we allocated a result */ 1512 if ((error != 0) && (result != NULL)) { 1513 free(result, M_DEVBUF); 1514 result = NULL; 1515 } 1516 return(result); 1517} 1518 1519 1520/******************************************************************************** 1521 * Perform a Flush command on the nominated controller. 1522 * 1523 * May be called with interrupts enabled or disabled; will not return until 1524 * the flush operation completes or fails. 1525 */ 1526static int 1527mlx_flush(struct mlx_softc *sc) 1528{ 1529 struct mlx_command *mc; 1530 int error; 1531 1532 debug_called(1); 1533 1534 /* get ourselves a command buffer */ 1535 error = 1; 1536 if ((mc = mlx_alloccmd(sc)) == NULL) 1537 goto out; 1538 /* get a command slot */ 1539 if (mlx_getslot(mc)) 1540 goto out; 1541 1542 /* build a flush command */ 1543 mlx_make_type2(mc, MLX_CMD_FLUSH, 0, 0, 0, 0, 0, 0, 0, 0); 1544 1545 /* can't assume that interrupts are going to work here, so play it safe */ 1546 if (mlx_poll_command(mc)) 1547 goto out; 1548 1549 /* command completed OK? */ 1550 if (mc->mc_status != 0) { 1551 device_printf(sc->mlx_dev, "FLUSH failed - %s\n", mlx_diagnose_command(mc)); 1552 goto out; 1553 } 1554 1555 error = 0; /* success */ 1556 out: 1557 if (mc != NULL) 1558 mlx_releasecmd(mc); 1559 return(error); 1560} 1561 1562/******************************************************************************** 1563 * Start a background consistency check on (drive). 1564 * 1565 * May be called with interrupts enabled or disabled; will return as soon as the 1566 * operation has started or been refused. 1567 */ 1568static int 1569mlx_check(struct mlx_softc *sc, int drive) 1570{ 1571 struct mlx_command *mc; 1572 int error; 1573 1574 debug_called(1); 1575 1576 /* get ourselves a command buffer */ 1577 error = 0x10000; 1578 if ((mc = mlx_alloccmd(sc)) == NULL) 1579 goto out; 1580 /* get a command slot */ 1581 if (mlx_getslot(mc)) 1582 goto out; 1583 1584 /* build a checkasync command, set the "fix it" flag */ 1585 mlx_make_type2(mc, MLX_CMD_CHECKASYNC, 0, 0, 0, 0, 0, drive | 0x80, 0, 0); 1586 1587 /* start the command and wait for it to be returned */ 1588 if (mlx_wait_command(mc)) 1589 goto out; 1590 1591 /* command completed OK? */ 1592 if (mc->mc_status != 0) { 1593 device_printf(sc->mlx_dev, "CHECK ASYNC failed - %s\n", mlx_diagnose_command(mc)); 1594 } else { 1595 device_printf(sc->mlx_sysdrive[drive].ms_disk, "consistency check started"); 1596 } 1597 error = mc->mc_status; 1598 1599 out: 1600 if (mc != NULL) 1601 mlx_releasecmd(mc); 1602 return(error); 1603} 1604 1605/******************************************************************************** 1606 * Start a background rebuild of the physical drive at (channel),(target). 1607 * 1608 * May be called with interrupts enabled or disabled; will return as soon as the 1609 * operation has started or been refused. 1610 */ 1611static int 1612mlx_rebuild(struct mlx_softc *sc, int channel, int target) 1613{ 1614 struct mlx_command *mc; 1615 int error; 1616 1617 debug_called(1); 1618 1619 /* get ourselves a command buffer */ 1620 error = 0x10000; 1621 if ((mc = mlx_alloccmd(sc)) == NULL) 1622 goto out; 1623 /* get a command slot */ 1624 if (mlx_getslot(mc)) 1625 goto out; 1626 1627 /* build a checkasync command, set the "fix it" flag */ 1628 mlx_make_type2(mc, MLX_CMD_REBUILDASYNC, channel, target, 0, 0, 0, 0, 0, 0); 1629 1630 /* start the command and wait for it to be returned */ 1631 if (mlx_wait_command(mc)) 1632 goto out; 1633 1634 /* command completed OK? */ 1635 if (mc->mc_status != 0) { 1636 device_printf(sc->mlx_dev, "REBUILD ASYNC failed - %s\n", mlx_diagnose_command(mc)); 1637 } else { 1638 device_printf(sc->mlx_dev, "drive rebuild started for %d:%d\n", channel, target); 1639 } 1640 error = mc->mc_status; 1641 1642 out: 1643 if (mc != NULL) 1644 mlx_releasecmd(mc); 1645 return(error); 1646} 1647 1648/******************************************************************************** 1649 * Run the command (mc) and return when it completes. 1650 * 1651 * Interrupts need to be enabled; returns nonzero on error. 1652 */ 1653static int 1654mlx_wait_command(struct mlx_command *mc) 1655{ 1656 struct mlx_softc *sc = mc->mc_sc; 1657 int error, count; 1658 1659 debug_called(1); 1660 1661 mc->mc_complete = NULL; 1662 mc->mc_private = mc; /* wake us when you're done */ 1663 if ((error = mlx_start(mc)) != 0) 1664 return(error); 1665 1666 count = 0; 1667 /* XXX better timeout? */ 1668 while ((mc->mc_status == MLX_STATUS_BUSY) && (count < 30)) { 1669 tsleep(mc->mc_private, PRIBIO | PCATCH, "mlxwcmd", hz); 1670 } 1671 1672 if (mc->mc_status != 0) { 1673 device_printf(sc->mlx_dev, "command failed - %s\n", mlx_diagnose_command(mc)); 1674 return(EIO); 1675 } 1676 return(0); 1677} 1678 1679 1680/******************************************************************************** 1681 * Start the command (mc) and busy-wait for it to complete. 1682 * 1683 * Should only be used when interrupts can't be relied upon. Returns 0 on 1684 * success, nonzero on error. 1685 * Successfully completed commands are dequeued. 1686 */ 1687static int 1688mlx_poll_command(struct mlx_command *mc) 1689{ 1690 struct mlx_softc *sc = mc->mc_sc; 1691 int error, count, s; 1692 1693 debug_called(1); 1694 1695 mc->mc_complete = NULL; 1696 mc->mc_private = NULL; /* we will poll for it */ 1697 if ((error = mlx_start(mc)) != 0) 1698 return(error); 1699 1700 count = 0; 1701 do { 1702 /* poll for completion */ 1703 mlx_done(mc->mc_sc); 1704 1705 } while ((mc->mc_status == MLX_STATUS_BUSY) && (count++ < 15000000)); 1706 if (mc->mc_status != MLX_STATUS_BUSY) { 1707 s = splbio(); 1708 TAILQ_REMOVE(&sc->mlx_work, mc, mc_link); 1709 splx(s); 1710 return(0); 1711 } 1712 device_printf(sc->mlx_dev, "command failed - %s\n", mlx_diagnose_command(mc)); 1713 return(EIO); 1714} 1715 1716/******************************************************************************** 1717 * Pull as much work off the softc's work queue as possible and give it to the 1718 * controller. Leave a couple of slots free for emergencies. 1719 * 1720 * Must be called at splbio or in an equivalent fashion that prevents 1721 * reentry or activity on the bioq. 1722 */ 1723static void 1724mlx_startio(struct mlx_softc *sc) 1725{ 1726 struct mlx_command *mc; 1727 struct mlxd_softc *mlxd; 1728 mlx_bio *bp; 1729 int blkcount; 1730 int driveno; 1731 int cmd; 1732 int s; 1733 1734 /* avoid reentrancy */ 1735 if (mlx_lock_tas(sc, MLX_LOCK_STARTING)) 1736 return; 1737 1738 /* spin until something prevents us from doing any work */ 1739 s = splbio(); 1740 for (;;) { 1741 1742 /* see if there's work to be done */ 1743 if ((bp = MLX_BIO_QFIRST(sc->mlx_bioq)) == NULL) 1744 break; 1745 /* get a command */ 1746 if ((mc = mlx_alloccmd(sc)) == NULL) 1747 break; 1748 /* get a slot for the command */ 1749 if (mlx_getslot(mc) != 0) { 1750 mlx_releasecmd(mc); 1751 break; 1752 } 1753 /* get the buf containing our work */ 1754 MLX_BIO_QREMOVE(sc->mlx_bioq, bp); 1755 sc->mlx_waitbufs--; 1756 splx(s); 1757 1758 /* connect the buf to the command */ 1759 mc->mc_complete = mlx_completeio; 1760 mc->mc_private = bp; 1761 mc->mc_data = MLX_BIO_DATA(bp); 1762 mc->mc_length = MLX_BIO_LENGTH(bp); 1763 if (MLX_BIO_IS_READ(bp)) { 1764 mc->mc_flags |= MLX_CMD_DATAIN; 1765 cmd = MLX_CMD_READSG; 1766 } else { 1767 mc->mc_flags |= MLX_CMD_DATAOUT; 1768 cmd = MLX_CMD_WRITESG; 1769 } 1770 1771 /* map the command so the controller can work with it */ 1772 mlx_mapcmd(mc); 1773 1774 /* build a suitable I/O command (assumes 512-byte rounded transfers) */ 1775 mlxd = (struct mlxd_softc *)MLX_BIO_SOFTC(bp); 1776 driveno = mlxd->mlxd_drive - sc->mlx_sysdrive; 1777 blkcount = (MLX_BIO_LENGTH(bp) + MLX_BLKSIZE - 1) / MLX_BLKSIZE; 1778 1779 if ((MLX_BIO_LBA(bp) + blkcount) > sc->mlx_sysdrive[driveno].ms_size) 1780 device_printf(sc->mlx_dev, "I/O beyond end of unit (%u,%d > %u)\n", 1781 MLX_BIO_LBA(bp), blkcount, sc->mlx_sysdrive[driveno].ms_size); 1782 1783 /* 1784 * Build the I/O command. Note that the SG list type bits are set to zero, 1785 * denoting the format of SG list that we are using. 1786 */ 1787 if (sc->mlx_iftype == MLX_IFTYPE_2) { 1788 mlx_make_type1(mc, (cmd == MLX_CMD_WRITESG) ? MLX_CMD_WRITESG_OLD : MLX_CMD_READSG_OLD, 1789 blkcount & 0xff, /* xfer length low byte */ 1790 MLX_BIO_LBA(bp), /* physical block number */ 1791 driveno, /* target drive number */ 1792 mc->mc_sgphys, /* location of SG list */ 1793 mc->mc_nsgent & 0x3f); /* size of SG list (top 3 bits clear) */ 1794 } else { 1795 mlx_make_type5(mc, cmd, 1796 blkcount & 0xff, /* xfer length low byte */ 1797 (driveno << 3) | ((blkcount >> 8) & 0x07), /* target and length high 3 bits */ 1798 MLX_BIO_LBA(bp), /* physical block number */ 1799 mc->mc_sgphys, /* location of SG list */ 1800 mc->mc_nsgent & 0x3f); /* size of SG list (top 3 bits clear) */ 1801 } 1802 1803 /* try to give command to controller */ 1804 if (mlx_start(mc) != 0) { 1805 /* fail the command */ 1806 mc->mc_status = MLX_STATUS_WEDGED; 1807 mlx_completeio(mc); 1808 } 1809 s = splbio(); 1810 } 1811 splx(s); 1812 mlx_lock_clr(sc, MLX_LOCK_STARTING); 1813} 1814 1815/******************************************************************************** 1816 * Handle completion of an I/O command. 1817 */ 1818static void 1819mlx_completeio(struct mlx_command *mc) 1820{ 1821 struct mlx_softc *sc = mc->mc_sc; 1822 mlx_bio *bp = (mlx_bio *)mc->mc_private; 1823 struct mlxd_softc *mlxd = (struct mlxd_softc *)MLX_BIO_SOFTC(bp); 1824 1825 if (mc->mc_status != MLX_STATUS_OK) { /* could be more verbose here? */ 1826 MLX_BIO_SET_ERROR(bp, EIO); 1827 1828 switch(mc->mc_status) { 1829 case MLX_STATUS_RDWROFFLINE: /* system drive has gone offline */ 1830 device_printf(mlxd->mlxd_dev, "drive offline\n"); 1831 /* should signal this with a return code */ 1832 mlxd->mlxd_drive->ms_state = MLX_SYSD_OFFLINE; 1833 break; 1834 1835 default: /* other I/O error */ 1836 device_printf(sc->mlx_dev, "I/O error - %s\n", mlx_diagnose_command(mc)); 1837#if 0 1838 device_printf(sc->mlx_dev, " b_bcount %ld blkcount %ld b_pblkno %d\n", 1839 MLX_BIO_LENGTH(bp), MLX_BIO_LENGTH(bp) / MLX_BLKSIZE, MLX_BIO_LBA(bp)); 1840 device_printf(sc->mlx_dev, " %13D\n", mc->mc_mailbox, " "); 1841#endif 1842 break; 1843 } 1844 } 1845 mlx_releasecmd(mc); 1846 mlxd_intr(bp); 1847} 1848 1849/******************************************************************************** 1850 * Take a command from user-space and try to run it. 1851 * 1852 * XXX Note that this can't perform very much in the way of error checking, and 1853 * as such, applications _must_ be considered trustworthy. 1854 * XXX Commands using S/G for data are not supported. 1855 */ 1856static int 1857mlx_user_command(struct mlx_softc *sc, struct mlx_usercommand *mu) 1858{ 1859 struct mlx_command *mc; 1860 struct mlx_dcdb *dcdb; 1861 void *kbuf; 1862 int error; 1863 1864 debug_called(0); 1865 1866 kbuf = NULL; 1867 mc = NULL; 1868 dcdb = NULL; 1869 error = ENOMEM; 1870 1871 /* get ourselves a command and copy in from user space */ 1872 if ((mc = mlx_alloccmd(sc)) == NULL) 1873 goto out; 1874 bcopy(mu->mu_command, mc->mc_mailbox, sizeof(mc->mc_mailbox)); 1875 debug(0, "got command buffer"); 1876 1877 /* if we need a buffer for data transfer, allocate one and copy in its initial contents */ 1878 if (mu->mu_datasize > 0) { 1879 if (((kbuf = malloc(mu->mu_datasize, M_DEVBUF, M_WAITOK)) == NULL) || 1880 (error = copyin(mu->mu_buf, kbuf, mu->mu_datasize))) 1881 goto out; 1882 debug(0, "got kernel buffer"); 1883 } 1884 1885 /* get a command slot */ 1886 if (mlx_getslot(mc)) 1887 goto out; 1888 debug(0, "got a slot"); 1889 1890 /* map the command so the controller can see it */ 1891 mc->mc_data = kbuf; 1892 mc->mc_length = mu->mu_datasize; 1893 mlx_mapcmd(mc); 1894 debug(0, "mapped"); 1895 1896 /* 1897 * If this is a passthrough SCSI command, the DCDB is packed at the 1898 * beginning of the data area. Fix up the DCDB to point to the correct physical 1899 * address and override any bufptr supplied by the caller since we know 1900 * what it's meant to be. 1901 */ 1902 if (mc->mc_mailbox[0] == MLX_CMD_DIRECT_CDB) { 1903 dcdb = (struct mlx_dcdb *)kbuf; 1904 dcdb->dcdb_physaddr = mc->mc_dataphys + sizeof(*dcdb); 1905 mu->mu_bufptr = 8; 1906 } 1907 1908 /* 1909 * If there's a data buffer, fix up the command's buffer pointer. 1910 */ 1911 if (mu->mu_datasize > 0) { 1912 1913 /* range check the pointer to physical buffer address */ 1914 if ((mu->mu_bufptr < 0) || (mu->mu_bufptr > (sizeof(mu->mu_command) - sizeof(u_int32_t)))) { 1915 error = EINVAL; 1916 goto out; 1917 } 1918 mc->mc_mailbox[mu->mu_bufptr ] = mc->mc_dataphys & 0xff; 1919 mc->mc_mailbox[mu->mu_bufptr + 1] = (mc->mc_dataphys >> 8) & 0xff; 1920 mc->mc_mailbox[mu->mu_bufptr + 2] = (mc->mc_dataphys >> 16) & 0xff; 1921 mc->mc_mailbox[mu->mu_bufptr + 3] = (mc->mc_dataphys >> 24) & 0xff; 1922 } 1923 debug(0, "command fixup"); 1924 1925 /* submit the command and wait */ 1926 if ((error = mlx_wait_command(mc)) != 0) 1927 goto out; 1928 1929 /* copy out status and data */ 1930 mu->mu_status = mc->mc_status; 1931 if ((mu->mu_datasize > 0) && ((error = copyout(kbuf, mu->mu_buf, mu->mu_datasize)))) 1932 goto out; 1933 error = 0; 1934 1935 out: 1936 mlx_releasecmd(mc); 1937 if (kbuf != NULL) 1938 free(kbuf, M_DEVBUF); 1939 return(error); 1940} 1941 1942/******************************************************************************** 1943 ******************************************************************************** 1944 Command I/O to Controller 1945 ******************************************************************************** 1946 ********************************************************************************/ 1947 1948/******************************************************************************** 1949 * Find a free command slot for (mc). 1950 * 1951 * Don't hand out a slot to a normal-priority command unless there are at least 1952 * 4 slots free for priority commands. 1953 */ 1954static int 1955mlx_getslot(struct mlx_command *mc) 1956{ 1957 struct mlx_softc *sc = mc->mc_sc; 1958 int s, slot, limit; 1959 1960 debug_called(1); 1961 1962 /* 1963 * Enforce slot-usage limit, if we have the required information. 1964 */ 1965 if (sc->mlx_enq2 != NULL) { 1966 limit = sc->mlx_enq2->me_max_commands; 1967 } else { 1968 limit = 2; 1969 } 1970 if (sc->mlx_busycmds >= ((mc->mc_flags & MLX_CMD_PRIORITY) ? limit : limit - 4)) 1971 return(EBUSY); 1972 1973 /* 1974 * Allocate an outstanding command slot 1975 * 1976 * XXX linear search is slow 1977 */ 1978 s = splbio(); 1979 for (slot = 0; slot < limit; slot++) { 1980 debug(2, "try slot %d", slot); 1981 if (sc->mlx_busycmd[slot] == NULL) 1982 break; 1983 } 1984 if (slot < limit) { 1985 sc->mlx_busycmd[slot] = mc; 1986 sc->mlx_busycmds++; 1987 } 1988 splx(s); 1989 1990 /* out of slots? */ 1991 if (slot >= limit) 1992 return(EBUSY); 1993 1994 debug(2, "got slot %d", slot); 1995 mc->mc_slot = slot; 1996 return(0); 1997} 1998 1999/******************************************************************************** 2000 * Map/unmap (mc)'s data in the controller's addressable space. 2001 */ 2002static void 2003mlx_setup_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error) 2004{ 2005 struct mlx_command *mc = (struct mlx_command *)arg; 2006 struct mlx_softc *sc = mc->mc_sc; 2007 struct mlx_sgentry *sg; 2008 int i; 2009 2010 debug_called(1); 2011 2012 /* XXX should be unnecessary */ 2013 if (sc->mlx_enq2 && (nsegments > sc->mlx_enq2->me_max_sg)) 2014 panic("MLX: too many s/g segments (%d, max %d)", nsegments, sc->mlx_enq2->me_max_sg); 2015 2016 /* get base address of s/g table */ 2017 sg = sc->mlx_sgtable + (mc->mc_slot * MLX_NSEG); 2018 2019 /* save s/g table information in command */ 2020 mc->mc_nsgent = nsegments; 2021 mc->mc_sgphys = sc->mlx_sgbusaddr + (mc->mc_slot * MLX_NSEG * sizeof(struct mlx_sgentry)); 2022 mc->mc_dataphys = segs[0].ds_addr; 2023 2024 /* populate s/g table */ 2025 for (i = 0; i < nsegments; i++, sg++) { 2026 sg->sg_addr = segs[i].ds_addr; 2027 sg->sg_count = segs[i].ds_len; 2028 } 2029} 2030 2031static void 2032mlx_mapcmd(struct mlx_command *mc) 2033{ 2034 struct mlx_softc *sc = mc->mc_sc; 2035 2036 debug_called(1); 2037 2038 /* if the command involves data at all */ 2039 if (mc->mc_data != NULL) { 2040 2041 /* map the data buffer into bus space and build the s/g list */ 2042 bus_dmamap_load(sc->mlx_buffer_dmat, mc->mc_dmamap, mc->mc_data, mc->mc_length, 2043 mlx_setup_dmamap, mc, 0); 2044 if (mc->mc_flags & MLX_CMD_DATAIN) 2045 bus_dmamap_sync(sc->mlx_buffer_dmat, mc->mc_dmamap, BUS_DMASYNC_PREREAD); 2046 if (mc->mc_flags & MLX_CMD_DATAOUT) 2047 bus_dmamap_sync(sc->mlx_buffer_dmat, mc->mc_dmamap, BUS_DMASYNC_PREWRITE); 2048 } 2049} 2050 2051static void 2052mlx_unmapcmd(struct mlx_command *mc) 2053{ 2054 struct mlx_softc *sc = mc->mc_sc; 2055 2056 debug_called(1); 2057 2058 /* if the command involved data at all */ 2059 if (mc->mc_data != NULL) { 2060 2061 if (mc->mc_flags & MLX_CMD_DATAIN) 2062 bus_dmamap_sync(sc->mlx_buffer_dmat, mc->mc_dmamap, BUS_DMASYNC_POSTREAD); 2063 if (mc->mc_flags & MLX_CMD_DATAOUT) 2064 bus_dmamap_sync(sc->mlx_buffer_dmat, mc->mc_dmamap, BUS_DMASYNC_POSTWRITE); 2065 2066 bus_dmamap_unload(sc->mlx_buffer_dmat, mc->mc_dmamap); 2067 } 2068} 2069 2070/******************************************************************************** 2071 * Try to deliver (mc) to the controller. 2072 * 2073 * Can be called at any interrupt level, with or without interrupts enabled. 2074 */ 2075static int 2076mlx_start(struct mlx_command *mc) 2077{ 2078 struct mlx_softc *sc = mc->mc_sc; 2079 int i, s, done; 2080 2081 debug_called(1); 2082 2083 /* save the slot number as ident so we can handle this command when complete */ 2084 mc->mc_mailbox[0x1] = mc->mc_slot; 2085 2086 /* mark the command as currently being processed */ 2087 mc->mc_status = MLX_STATUS_BUSY; 2088 2089 /* set a default 60-second timeout XXX tunable? XXX not currently used */ 2090 mc->mc_timeout = time_second + 60; 2091 2092 /* spin waiting for the mailbox */ 2093 for (i = 100000, done = 0; (i > 0) && !done; i--) { 2094 s = splbio(); 2095 if (sc->mlx_tryqueue(sc, mc)) { 2096 done = 1; 2097 /* move command to work queue */ 2098 TAILQ_INSERT_TAIL(&sc->mlx_work, mc, mc_link); 2099 } 2100 splx(s); /* drop spl to allow completion interrupts */ 2101 } 2102 2103 /* command is enqueued */ 2104 if (done) 2105 return(0); 2106 2107 /* 2108 * We couldn't get the controller to take the command. Revoke the slot 2109 * that the command was given and return it with a bad status. 2110 */ 2111 sc->mlx_busycmd[mc->mc_slot] = NULL; 2112 device_printf(sc->mlx_dev, "controller wedged (not taking commands)\n"); 2113 mc->mc_status = MLX_STATUS_WEDGED; 2114 mlx_complete(sc); 2115 return(EIO); 2116} 2117 2118/******************************************************************************** 2119 * Poll the controller (sc) for completed commands. 2120 * Update command status and free slots for reuse. If any slots were freed, 2121 * new commands may be posted. 2122 * 2123 * Returns nonzero if one or more commands were completed. 2124 */ 2125static int 2126mlx_done(struct mlx_softc *sc) 2127{ 2128 struct mlx_command *mc; 2129 int s, result; 2130 u_int8_t slot; 2131 u_int16_t status; 2132 2133 debug_called(2); 2134 2135 result = 0; 2136 2137 /* loop collecting completed commands */ 2138 s = splbio(); 2139 for (;;) { 2140 /* poll for a completed command's identifier and status */ 2141 if (sc->mlx_findcomplete(sc, &slot, &status)) { 2142 result = 1; 2143 mc = sc->mlx_busycmd[slot]; /* find command */ 2144 if (mc != NULL) { /* paranoia */ 2145 if (mc->mc_status == MLX_STATUS_BUSY) { 2146 mc->mc_status = status; /* save status */ 2147 2148 /* free slot for reuse */ 2149 sc->mlx_busycmd[slot] = NULL; 2150 sc->mlx_busycmds--; 2151 } else { 2152 device_printf(sc->mlx_dev, "duplicate done event for slot %d\n", slot); 2153 } 2154 } else { 2155 device_printf(sc->mlx_dev, "done event for nonbusy slot %d\n", slot); 2156 } 2157 } else { 2158 break; 2159 } 2160 } 2161 splx(s); 2162 2163 /* if we've completed any commands, try posting some more */ 2164 if (result) 2165 mlx_startio(sc); 2166 2167 /* handle completion and timeouts */ 2168 mlx_complete(sc); 2169 2170 return(result); 2171} 2172 2173/******************************************************************************** 2174 * Perform post-completion processing for commands on (sc). 2175 */ 2176static void 2177mlx_complete(struct mlx_softc *sc) 2178{ 2179 struct mlx_command *mc, *nc; 2180 int s, count; 2181 2182 debug_called(2); 2183 2184 /* avoid reentrancy XXX might want to signal and request a restart */ 2185 if (mlx_lock_tas(sc, MLX_LOCK_COMPLETING)) 2186 return; 2187 2188 s = splbio(); 2189 count = 0; 2190 2191 /* scan the list of busy/done commands */ 2192 mc = TAILQ_FIRST(&sc->mlx_work); 2193 while (mc != NULL) { 2194 nc = TAILQ_NEXT(mc, mc_link); 2195 2196 /* Command has been completed in some fashion */ 2197 if (mc->mc_status != MLX_STATUS_BUSY) { 2198 2199 /* unmap the command's data buffer */ 2200 mlx_unmapcmd(mc); 2201 /* 2202 * Does the command have a completion handler? 2203 */ 2204 if (mc->mc_complete != NULL) { 2205 /* remove from list and give to handler */ 2206 TAILQ_REMOVE(&sc->mlx_work, mc, mc_link); 2207 mc->mc_complete(mc); 2208 2209 /* 2210 * Is there a sleeper waiting on this command? 2211 */ 2212 } else if (mc->mc_private != NULL) { /* sleeping caller wants to know about it */ 2213 2214 /* remove from list and wake up sleeper */ 2215 TAILQ_REMOVE(&sc->mlx_work, mc, mc_link); 2216 wakeup_one(mc->mc_private); 2217 2218 /* 2219 * Leave the command for a caller that's polling for it. 2220 */ 2221 } else { 2222 } 2223 } 2224 mc = nc; 2225 } 2226 splx(s); 2227 2228 mlx_lock_clr(sc, MLX_LOCK_COMPLETING); 2229} 2230 2231/******************************************************************************** 2232 ******************************************************************************** 2233 Command Buffer Management 2234 ******************************************************************************** 2235 ********************************************************************************/ 2236 2237/******************************************************************************** 2238 * Get a new command buffer. 2239 * 2240 * This may return NULL in low-memory cases. 2241 * 2242 * Note that using malloc() is expensive (the command buffer is << 1 page) but 2243 * necessary if we are to be a loadable module before the zone allocator is fixed. 2244 * 2245 * If possible, we recycle a command buffer that's been used before. 2246 * 2247 * XXX Note that command buffers are not cleaned out - it is the caller's 2248 * responsibility to ensure that all required fields are filled in before 2249 * using a buffer. 2250 */ 2251static struct mlx_command * 2252mlx_alloccmd(struct mlx_softc *sc) 2253{ 2254 struct mlx_command *mc; 2255 int error; 2256 int s; 2257 2258 debug_called(1); 2259 2260 s = splbio(); 2261 if ((mc = TAILQ_FIRST(&sc->mlx_freecmds)) != NULL) 2262 TAILQ_REMOVE(&sc->mlx_freecmds, mc, mc_link); 2263 splx(s); 2264 2265 /* allocate a new command buffer? */ 2266 if (mc == NULL) { 2267 mc = (struct mlx_command *)malloc(sizeof(*mc), M_DEVBUF, M_NOWAIT | M_ZERO); 2268 if (mc != NULL) { 2269 mc->mc_sc = sc; 2270 error = bus_dmamap_create(sc->mlx_buffer_dmat, 0, &mc->mc_dmamap); 2271 if (error) { 2272 free(mc, M_DEVBUF); 2273 return(NULL); 2274 } 2275 } 2276 } 2277 return(mc); 2278} 2279 2280/******************************************************************************** 2281 * Release a command buffer for recycling. 2282 * 2283 * XXX It might be a good idea to limit the number of commands we save for reuse 2284 * if it's shown that this list bloats out massively. 2285 */ 2286static void 2287mlx_releasecmd(struct mlx_command *mc) 2288{ 2289 int s; 2290 2291 debug_called(1); 2292 2293 s = splbio(); 2294 TAILQ_INSERT_HEAD(&mc->mc_sc->mlx_freecmds, mc, mc_link); 2295 splx(s); 2296} 2297 2298/******************************************************************************** 2299 * Permanently discard a command buffer. 2300 */ 2301static void 2302mlx_freecmd(struct mlx_command *mc) 2303{ 2304 struct mlx_softc *sc = mc->mc_sc; 2305 2306 debug_called(1); 2307 bus_dmamap_destroy(sc->mlx_buffer_dmat, mc->mc_dmamap); 2308 free(mc, M_DEVBUF); 2309} 2310 2311 2312/******************************************************************************** 2313 ******************************************************************************** 2314 Type 3 interface accessor methods 2315 ******************************************************************************** 2316 ********************************************************************************/ 2317 2318/******************************************************************************** 2319 * Try to give (mc) to the controller. Returns 1 if successful, 0 on failure 2320 * (the controller is not ready to take a command). 2321 * 2322 * Must be called at splbio or in a fashion that prevents reentry. 2323 */ 2324static int 2325mlx_v3_tryqueue(struct mlx_softc *sc, struct mlx_command *mc) 2326{ 2327 int i; 2328 2329 debug_called(2); 2330 2331 /* ready for our command? */ 2332 if (!(MLX_V3_GET_IDBR(sc) & MLX_V3_IDB_FULL)) { 2333 /* copy mailbox data to window */ 2334 for (i = 0; i < 13; i++) 2335 MLX_V3_PUT_MAILBOX(sc, i, mc->mc_mailbox[i]); 2336 2337 /* post command */ 2338 MLX_V3_PUT_IDBR(sc, MLX_V3_IDB_FULL); 2339 return(1); 2340 } 2341 return(0); 2342} 2343 2344/******************************************************************************** 2345 * See if a command has been completed, if so acknowledge its completion 2346 * and recover the slot number and status code. 2347 * 2348 * Must be called at splbio or in a fashion that prevents reentry. 2349 */ 2350static int 2351mlx_v3_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status) 2352{ 2353 2354 debug_called(2); 2355 2356 /* status available? */ 2357 if (MLX_V3_GET_ODBR(sc) & MLX_V3_ODB_SAVAIL) { 2358 *slot = MLX_V3_GET_STATUS_IDENT(sc); /* get command identifier */ 2359 *status = MLX_V3_GET_STATUS(sc); /* get status */ 2360 2361 /* acknowledge completion */ 2362 MLX_V3_PUT_ODBR(sc, MLX_V3_ODB_SAVAIL); 2363 MLX_V3_PUT_IDBR(sc, MLX_V3_IDB_SACK); 2364 return(1); 2365 } 2366 return(0); 2367} 2368 2369/******************************************************************************** 2370 * Enable/disable interrupts as requested. (No acknowledge required) 2371 * 2372 * Must be called at splbio or in a fashion that prevents reentry. 2373 */ 2374static void 2375mlx_v3_intaction(struct mlx_softc *sc, int action) 2376{ 2377 debug_called(1); 2378 2379 switch(action) { 2380 case MLX_INTACTION_DISABLE: 2381 MLX_V3_PUT_IER(sc, 0); 2382 sc->mlx_state &= ~MLX_STATE_INTEN; 2383 break; 2384 case MLX_INTACTION_ENABLE: 2385 MLX_V3_PUT_IER(sc, 1); 2386 sc->mlx_state |= MLX_STATE_INTEN; 2387 break; 2388 } 2389} 2390 2391/******************************************************************************** 2392 * Poll for firmware error codes during controller initialisation. 2393 * Returns 0 if initialisation is complete, 1 if still in progress but no 2394 * error has been fetched, 2 if an error has been retrieved. 2395 */ 2396static int 2397mlx_v3_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2) 2398{ 2399 u_int8_t fwerror; 2400 static int initted = 0; 2401 2402 debug_called(2); 2403 2404 /* first time around, clear any hardware completion status */ 2405 if (!initted) { 2406 MLX_V3_PUT_IDBR(sc, MLX_V3_IDB_SACK); 2407 DELAY(1000); 2408 initted = 1; 2409 } 2410 2411 /* init in progress? */ 2412 if (!(MLX_V3_GET_IDBR(sc) & MLX_V3_IDB_INIT_BUSY)) 2413 return(0); 2414 2415 /* test error value */ 2416 fwerror = MLX_V3_GET_FWERROR(sc); 2417 if (!(fwerror & MLX_V3_FWERROR_PEND)) 2418 return(1); 2419 2420 /* mask status pending bit, fetch status */ 2421 *error = fwerror & ~MLX_V3_FWERROR_PEND; 2422 *param1 = MLX_V3_GET_FWERROR_PARAM1(sc); 2423 *param2 = MLX_V3_GET_FWERROR_PARAM2(sc); 2424 2425 /* acknowledge */ 2426 MLX_V3_PUT_FWERROR(sc, 0); 2427 2428 return(2); 2429} 2430 2431/******************************************************************************** 2432 ******************************************************************************** 2433 Type 4 interface accessor methods 2434 ******************************************************************************** 2435 ********************************************************************************/ 2436 2437/******************************************************************************** 2438 * Try to give (mc) to the controller. Returns 1 if successful, 0 on failure 2439 * (the controller is not ready to take a command). 2440 * 2441 * Must be called at splbio or in a fashion that prevents reentry. 2442 */ 2443static int 2444mlx_v4_tryqueue(struct mlx_softc *sc, struct mlx_command *mc) 2445{ 2446 int i; 2447 2448 debug_called(2); 2449 2450 /* ready for our command? */ 2451 if (!(MLX_V4_GET_IDBR(sc) & MLX_V4_IDB_FULL)) { 2452 /* copy mailbox data to window */ 2453 for (i = 0; i < 13; i++) 2454 MLX_V4_PUT_MAILBOX(sc, i, mc->mc_mailbox[i]); 2455 2456 /* memory-mapped controller, so issue a write barrier to ensure the mailbox is filled */ 2457 bus_space_barrier(sc->mlx_btag, sc->mlx_bhandle, MLX_V4_MAILBOX, MLX_V4_MAILBOX_LENGTH, 2458 BUS_SPACE_BARRIER_WRITE); 2459 2460 /* post command */ 2461 MLX_V4_PUT_IDBR(sc, MLX_V4_IDB_HWMBOX_CMD); 2462 return(1); 2463 } 2464 return(0); 2465} 2466 2467/******************************************************************************** 2468 * See if a command has been completed, if so acknowledge its completion 2469 * and recover the slot number and status code. 2470 * 2471 * Must be called at splbio or in a fashion that prevents reentry. 2472 */ 2473static int 2474mlx_v4_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status) 2475{ 2476 2477 debug_called(2); 2478 2479 /* status available? */ 2480 if (MLX_V4_GET_ODBR(sc) & MLX_V4_ODB_HWSAVAIL) { 2481 *slot = MLX_V4_GET_STATUS_IDENT(sc); /* get command identifier */ 2482 *status = MLX_V4_GET_STATUS(sc); /* get status */ 2483 2484 /* acknowledge completion */ 2485 MLX_V4_PUT_ODBR(sc, MLX_V4_ODB_HWMBOX_ACK); 2486 MLX_V4_PUT_IDBR(sc, MLX_V4_IDB_SACK); 2487 return(1); 2488 } 2489 return(0); 2490} 2491 2492/******************************************************************************** 2493 * Enable/disable interrupts as requested. 2494 * 2495 * Must be called at splbio or in a fashion that prevents reentry. 2496 */ 2497static void 2498mlx_v4_intaction(struct mlx_softc *sc, int action) 2499{ 2500 debug_called(1); 2501 2502 switch(action) { 2503 case MLX_INTACTION_DISABLE: 2504 MLX_V4_PUT_IER(sc, MLX_V4_IER_MASK | MLX_V4_IER_DISINT); 2505 sc->mlx_state &= ~MLX_STATE_INTEN; 2506 break; 2507 case MLX_INTACTION_ENABLE: 2508 MLX_V4_PUT_IER(sc, MLX_V4_IER_MASK & ~MLX_V4_IER_DISINT); 2509 sc->mlx_state |= MLX_STATE_INTEN; 2510 break; 2511 } 2512} 2513 2514/******************************************************************************** 2515 * Poll for firmware error codes during controller initialisation. 2516 * Returns 0 if initialisation is complete, 1 if still in progress but no 2517 * error has been fetched, 2 if an error has been retrieved. 2518 */ 2519static int 2520mlx_v4_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2) 2521{ 2522 u_int8_t fwerror; 2523 static int initted = 0; 2524 2525 debug_called(2); 2526 2527 /* first time around, clear any hardware completion status */ 2528 if (!initted) { 2529 MLX_V4_PUT_IDBR(sc, MLX_V4_IDB_SACK); 2530 DELAY(1000); 2531 initted = 1; 2532 } 2533 2534 /* init in progress? */ 2535 if (!(MLX_V4_GET_IDBR(sc) & MLX_V4_IDB_INIT_BUSY)) 2536 return(0); 2537 2538 /* test error value */ 2539 fwerror = MLX_V4_GET_FWERROR(sc); 2540 if (!(fwerror & MLX_V4_FWERROR_PEND)) 2541 return(1); 2542 2543 /* mask status pending bit, fetch status */ 2544 *error = fwerror & ~MLX_V4_FWERROR_PEND; 2545 *param1 = MLX_V4_GET_FWERROR_PARAM1(sc); 2546 *param2 = MLX_V4_GET_FWERROR_PARAM2(sc); 2547 2548 /* acknowledge */ 2549 MLX_V4_PUT_FWERROR(sc, 0); 2550 2551 return(2); 2552} 2553 2554/******************************************************************************** 2555 ******************************************************************************** 2556 Type 5 interface accessor methods 2557 ******************************************************************************** 2558 ********************************************************************************/ 2559 2560/******************************************************************************** 2561 * Try to give (mc) to the controller. Returns 1 if successful, 0 on failure 2562 * (the controller is not ready to take a command). 2563 * 2564 * Must be called at splbio or in a fashion that prevents reentry. 2565 */ 2566static int 2567mlx_v5_tryqueue(struct mlx_softc *sc, struct mlx_command *mc) 2568{ 2569 int i; 2570 2571 debug_called(2); 2572 2573 /* ready for our command? */ 2574 if (MLX_V5_GET_IDBR(sc) & MLX_V5_IDB_EMPTY) { 2575 /* copy mailbox data to window */ 2576 for (i = 0; i < 13; i++) 2577 MLX_V5_PUT_MAILBOX(sc, i, mc->mc_mailbox[i]); 2578 2579 /* post command */ 2580 MLX_V5_PUT_IDBR(sc, MLX_V5_IDB_HWMBOX_CMD); 2581 return(1); 2582 } 2583 return(0); 2584} 2585 2586/******************************************************************************** 2587 * See if a command has been completed, if so acknowledge its completion 2588 * and recover the slot number and status code. 2589 * 2590 * Must be called at splbio or in a fashion that prevents reentry. 2591 */ 2592static int 2593mlx_v5_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status) 2594{ 2595 2596 debug_called(2); 2597 2598 /* status available? */ 2599 if (MLX_V5_GET_ODBR(sc) & MLX_V5_ODB_HWSAVAIL) { 2600 *slot = MLX_V5_GET_STATUS_IDENT(sc); /* get command identifier */ 2601 *status = MLX_V5_GET_STATUS(sc); /* get status */ 2602 2603 /* acknowledge completion */ 2604 MLX_V5_PUT_ODBR(sc, MLX_V5_ODB_HWMBOX_ACK); 2605 MLX_V5_PUT_IDBR(sc, MLX_V5_IDB_SACK); 2606 return(1); 2607 } 2608 return(0); 2609} 2610 2611/******************************************************************************** 2612 * Enable/disable interrupts as requested. 2613 * 2614 * Must be called at splbio or in a fashion that prevents reentry. 2615 */ 2616static void 2617mlx_v5_intaction(struct mlx_softc *sc, int action) 2618{ 2619 debug_called(1); 2620 2621 switch(action) { 2622 case MLX_INTACTION_DISABLE: 2623 MLX_V5_PUT_IER(sc, 0xff & MLX_V5_IER_DISINT); 2624 sc->mlx_state &= ~MLX_STATE_INTEN; 2625 break; 2626 case MLX_INTACTION_ENABLE: 2627 MLX_V5_PUT_IER(sc, 0xff & ~MLX_V5_IER_DISINT); 2628 sc->mlx_state |= MLX_STATE_INTEN; 2629 break; 2630 } 2631} 2632 2633/******************************************************************************** 2634 * Poll for firmware error codes during controller initialisation. 2635 * Returns 0 if initialisation is complete, 1 if still in progress but no 2636 * error has been fetched, 2 if an error has been retrieved. 2637 */ 2638static int 2639mlx_v5_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2) 2640{ 2641 u_int8_t fwerror; 2642 static int initted = 0; 2643 2644 debug_called(2); 2645 2646 /* first time around, clear any hardware completion status */ 2647 if (!initted) { 2648 MLX_V5_PUT_IDBR(sc, MLX_V5_IDB_SACK); 2649 DELAY(1000); 2650 initted = 1; 2651 } 2652 2653 /* init in progress? */ 2654 if (MLX_V5_GET_IDBR(sc) & MLX_V5_IDB_INIT_DONE) 2655 return(0); 2656 2657 /* test for error value */ 2658 fwerror = MLX_V5_GET_FWERROR(sc); 2659 if (!(fwerror & MLX_V5_FWERROR_PEND)) 2660 return(1); 2661 2662 /* mask status pending bit, fetch status */ 2663 *error = fwerror & ~MLX_V5_FWERROR_PEND; 2664 *param1 = MLX_V5_GET_FWERROR_PARAM1(sc); 2665 *param2 = MLX_V5_GET_FWERROR_PARAM2(sc); 2666 2667 /* acknowledge */ 2668 MLX_V5_PUT_FWERROR(sc, 0xff); 2669 2670 return(2); 2671} 2672 2673/******************************************************************************** 2674 ******************************************************************************** 2675 Debugging 2676 ******************************************************************************** 2677 ********************************************************************************/ 2678 2679/******************************************************************************** 2680 * Return a status message describing (mc) 2681 */ 2682static char *mlx_status_messages[] = { 2683 "normal completion", /* 00 */ 2684 "irrecoverable data error", /* 01 */ 2685 "drive does not exist, or is offline", /* 02 */ 2686 "attempt to write beyond end of drive", /* 03 */ 2687 "bad data encountered", /* 04 */ 2688 "invalid log entry request", /* 05 */ 2689 "attempt to rebuild online drive", /* 06 */ 2690 "new disk failed during rebuild", /* 07 */ 2691 "invalid channel/target", /* 08 */ 2692 "rebuild/check already in progress", /* 09 */ 2693 "one or more disks are dead", /* 10 */ 2694 "invalid or non-redundant drive", /* 11 */ 2695 "channel is busy", /* 12 */ 2696 "channel is not stopped", /* 13 */ 2697 "rebuild successfully terminated", /* 14 */ 2698 "unsupported command", /* 15 */ 2699 "check condition received", /* 16 */ 2700 "device is busy", /* 17 */ 2701 "selection or command timeout", /* 18 */ 2702 "command terminated abnormally", /* 19 */ 2703 "" 2704}; 2705 2706static struct 2707{ 2708 int command; 2709 u_int16_t status; 2710 int msg; 2711} mlx_messages[] = { 2712 {MLX_CMD_READSG, 0x0001, 1}, 2713 {MLX_CMD_READSG, 0x0002, 1}, 2714 {MLX_CMD_READSG, 0x0105, 3}, 2715 {MLX_CMD_READSG, 0x010c, 4}, 2716 {MLX_CMD_WRITESG, 0x0001, 1}, 2717 {MLX_CMD_WRITESG, 0x0002, 1}, 2718 {MLX_CMD_WRITESG, 0x0105, 3}, 2719 {MLX_CMD_READSG_OLD, 0x0001, 1}, 2720 {MLX_CMD_READSG_OLD, 0x0002, 1}, 2721 {MLX_CMD_READSG_OLD, 0x0105, 3}, 2722 {MLX_CMD_WRITESG_OLD, 0x0001, 1}, 2723 {MLX_CMD_WRITESG_OLD, 0x0002, 1}, 2724 {MLX_CMD_WRITESG_OLD, 0x0105, 3}, 2725 {MLX_CMD_LOGOP, 0x0105, 5}, 2726 {MLX_CMD_REBUILDASYNC, 0x0002, 6}, 2727 {MLX_CMD_REBUILDASYNC, 0x0004, 7}, 2728 {MLX_CMD_REBUILDASYNC, 0x0105, 8}, 2729 {MLX_CMD_REBUILDASYNC, 0x0106, 9}, 2730 {MLX_CMD_REBUILDASYNC, 0x0107, 14}, 2731 {MLX_CMD_CHECKASYNC, 0x0002, 10}, 2732 {MLX_CMD_CHECKASYNC, 0x0105, 11}, 2733 {MLX_CMD_CHECKASYNC, 0x0106, 9}, 2734 {MLX_CMD_STOPCHANNEL, 0x0106, 12}, 2735 {MLX_CMD_STOPCHANNEL, 0x0105, 8}, 2736 {MLX_CMD_STARTCHANNEL, 0x0005, 13}, 2737 {MLX_CMD_STARTCHANNEL, 0x0105, 8}, 2738 {MLX_CMD_DIRECT_CDB, 0x0002, 16}, 2739 {MLX_CMD_DIRECT_CDB, 0x0008, 17}, 2740 {MLX_CMD_DIRECT_CDB, 0x000e, 18}, 2741 {MLX_CMD_DIRECT_CDB, 0x000f, 19}, 2742 {MLX_CMD_DIRECT_CDB, 0x0105, 8}, 2743 2744 {0, 0x0104, 14}, 2745 {-1, 0, 0} 2746}; 2747 2748static char * 2749mlx_diagnose_command(struct mlx_command *mc) 2750{ 2751 static char unkmsg[80]; 2752 int i; 2753 2754 /* look up message in table */ 2755 for (i = 0; mlx_messages[i].command != -1; i++) 2756 if (((mc->mc_mailbox[0] == mlx_messages[i].command) || (mlx_messages[i].command == 0)) && 2757 (mc->mc_status == mlx_messages[i].status)) 2758 return(mlx_status_messages[mlx_messages[i].msg]); 2759 2760 sprintf(unkmsg, "unknown response 0x%x for command 0x%x", (int)mc->mc_status, (int)mc->mc_mailbox[0]); 2761 return(unkmsg); 2762} 2763 2764/******************************************************************************* 2765 * Print a string describing the controller (sc) 2766 */ 2767static struct 2768{ 2769 int hwid; 2770 char *name; 2771} mlx_controller_names[] = { 2772 {0x01, "960P/PD"}, 2773 {0x02, "960PL"}, 2774 {0x10, "960PG"}, 2775 {0x11, "960PJ"}, 2776 {0x12, "960PR"}, 2777 {0x13, "960PT"}, 2778 {0x14, "960PTL0"}, 2779 {0x15, "960PRL"}, 2780 {0x16, "960PTL1"}, 2781 {0x20, "1164PVX"}, 2782 {-1, NULL} 2783}; 2784 2785static void 2786mlx_describe_controller(struct mlx_softc *sc) 2787{ 2788 static char buf[80]; 2789 char *model; 2790 int i; 2791 2792 for (i = 0, model = NULL; mlx_controller_names[i].name != NULL; i++) { 2793 if ((sc->mlx_enq2->me_hardware_id & 0xff) == mlx_controller_names[i].hwid) { 2794 model = mlx_controller_names[i].name; 2795 break; 2796 } 2797 } 2798 if (model == NULL) { 2799 sprintf(buf, " model 0x%x", sc->mlx_enq2->me_hardware_id & 0xff); 2800 model = buf; 2801 } 2802 device_printf(sc->mlx_dev, "DAC%s, %d channel%s, firmware %d.%02d-%c-%02d, %dMB RAM\n", 2803 model, 2804 sc->mlx_enq2->me_actual_channels, 2805 sc->mlx_enq2->me_actual_channels > 1 ? "s" : "", 2806 sc->mlx_enq2->me_firmware_id & 0xff, 2807 (sc->mlx_enq2->me_firmware_id >> 8) & 0xff, 2808 (sc->mlx_enq2->me_firmware_id >> 24) & 0xff, 2809 (sc->mlx_enq2->me_firmware_id >> 16) & 0xff, 2810 sc->mlx_enq2->me_mem_size / (1024 * 1024)); 2811 2812 if (bootverbose) { 2813 device_printf(sc->mlx_dev, " Hardware ID 0x%08x\n", sc->mlx_enq2->me_hardware_id); 2814 device_printf(sc->mlx_dev, " Firmware ID 0x%08x\n", sc->mlx_enq2->me_firmware_id); 2815 device_printf(sc->mlx_dev, " Configured/Actual channels %d/%d\n", sc->mlx_enq2->me_configured_channels, 2816 sc->mlx_enq2->me_actual_channels); 2817 device_printf(sc->mlx_dev, " Max Targets %d\n", sc->mlx_enq2->me_max_targets); 2818 device_printf(sc->mlx_dev, " Max Tags %d\n", sc->mlx_enq2->me_max_tags); 2819 device_printf(sc->mlx_dev, " Max System Drives %d\n", sc->mlx_enq2->me_max_sys_drives); 2820 device_printf(sc->mlx_dev, " Max Arms %d\n", sc->mlx_enq2->me_max_arms); 2821 device_printf(sc->mlx_dev, " Max Spans %d\n", sc->mlx_enq2->me_max_spans); 2822 device_printf(sc->mlx_dev, " DRAM/cache/flash/NVRAM size %d/%d/%d/%d\n", sc->mlx_enq2->me_mem_size, 2823 sc->mlx_enq2->me_cache_size, sc->mlx_enq2->me_flash_size, sc->mlx_enq2->me_nvram_size); 2824 device_printf(sc->mlx_dev, " DRAM type %d\n", sc->mlx_enq2->me_mem_type); 2825 device_printf(sc->mlx_dev, " Clock Speed %dns\n", sc->mlx_enq2->me_clock_speed); 2826 device_printf(sc->mlx_dev, " Hardware Speed %dns\n", sc->mlx_enq2->me_hardware_speed); 2827 device_printf(sc->mlx_dev, " Max Commands %d\n", sc->mlx_enq2->me_max_commands); 2828 device_printf(sc->mlx_dev, " Max SG Entries %d\n", sc->mlx_enq2->me_max_sg); 2829 device_printf(sc->mlx_dev, " Max DP %d\n", sc->mlx_enq2->me_max_dp); 2830 device_printf(sc->mlx_dev, " Max IOD %d\n", sc->mlx_enq2->me_max_iod); 2831 device_printf(sc->mlx_dev, " Max Comb %d\n", sc->mlx_enq2->me_max_comb); 2832 device_printf(sc->mlx_dev, " Latency %ds\n", sc->mlx_enq2->me_latency); 2833 device_printf(sc->mlx_dev, " SCSI Timeout %ds\n", sc->mlx_enq2->me_scsi_timeout); 2834 device_printf(sc->mlx_dev, " Min Free Lines %d\n", sc->mlx_enq2->me_min_freelines); 2835 device_printf(sc->mlx_dev, " Rate Constant %d\n", sc->mlx_enq2->me_rate_const); 2836 device_printf(sc->mlx_dev, " MAXBLK %d\n", sc->mlx_enq2->me_maxblk); 2837 device_printf(sc->mlx_dev, " Blocking Factor %d sectors\n", sc->mlx_enq2->me_blocking_factor); 2838 device_printf(sc->mlx_dev, " Cache Line Size %d blocks\n", sc->mlx_enq2->me_cacheline); 2839 device_printf(sc->mlx_dev, " SCSI Capability %s%dMHz, %d bit\n", 2840 sc->mlx_enq2->me_scsi_cap & (1<<4) ? "differential " : "", 2841 (1 << ((sc->mlx_enq2->me_scsi_cap >> 2) & 3)) * 10, 2842 8 << (sc->mlx_enq2->me_scsi_cap & 0x3)); 2843 device_printf(sc->mlx_dev, " Firmware Build Number %d\n", sc->mlx_enq2->me_firmware_build); 2844 device_printf(sc->mlx_dev, " Fault Management Type %d\n", sc->mlx_enq2->me_fault_mgmt_type); 2845 device_printf(sc->mlx_dev, " Features %b\n", sc->mlx_enq2->me_firmware_features, 2846 "\20\4Background Init\3Read Ahead\2MORE\1Cluster\n"); 2847 2848 } 2849} 2850 2851/******************************************************************************* 2852 * Emit a string describing the firmware handshake status code, and return a flag 2853 * indicating whether the code represents a fatal error. 2854 * 2855 * Error code interpretations are from the Linux driver, and don't directly match 2856 * the messages printed by Mylex's BIOS. This may change if documentation on the 2857 * codes is forthcoming. 2858 */ 2859static int 2860mlx_fw_message(struct mlx_softc *sc, int error, int param1, int param2) 2861{ 2862 switch(error) { 2863 case 0x00: 2864 device_printf(sc->mlx_dev, "physical drive %d:%d not responding\n", param2, param1); 2865 break; 2866 case 0x08: 2867 /* we could be neater about this and give some indication when we receive more of them */ 2868 if (!(sc->mlx_flags & MLX_SPINUP_REPORTED)) { 2869 device_printf(sc->mlx_dev, "spinning up drives...\n"); 2870 sc->mlx_flags |= MLX_SPINUP_REPORTED; 2871 } 2872 break; 2873 case 0x30: 2874 device_printf(sc->mlx_dev, "configuration checksum error\n"); 2875 break; 2876 case 0x60: 2877 device_printf(sc->mlx_dev, "mirror race recovery failed\n"); 2878 break; 2879 case 0x70: 2880 device_printf(sc->mlx_dev, "mirror race recovery in progress\n"); 2881 break; 2882 case 0x90: 2883 device_printf(sc->mlx_dev, "physical drive %d:%d COD mismatch\n", param2, param1); 2884 break; 2885 case 0xa0: 2886 device_printf(sc->mlx_dev, "logical drive installation aborted\n"); 2887 break; 2888 case 0xb0: 2889 device_printf(sc->mlx_dev, "mirror race on a critical system drive\n"); 2890 break; 2891 case 0xd0: 2892 device_printf(sc->mlx_dev, "new controller configuration found\n"); 2893 break; 2894 case 0xf0: 2895 device_printf(sc->mlx_dev, "FATAL MEMORY PARITY ERROR\n"); 2896 return(1); 2897 default: 2898 device_printf(sc->mlx_dev, "unknown firmware initialisation error %02x:%02x:%02x\n", error, param1, param2); 2899 break; 2900 } 2901 return(0); 2902} 2903 2904/******************************************************************************** 2905 ******************************************************************************** 2906 Utility Functions 2907 ******************************************************************************** 2908 ********************************************************************************/ 2909 2910/******************************************************************************** 2911 * Find the disk whose unit number is (unit) on this controller 2912 */ 2913static struct mlx_sysdrive * 2914mlx_findunit(struct mlx_softc *sc, int unit) 2915{ 2916 int i; 2917 2918 /* search system drives */ 2919 for (i = 0; i < MLX_MAXDRIVES; i++) { 2920 /* is this one attached? */ 2921 if (sc->mlx_sysdrive[i].ms_disk != 0) { 2922 /* is this the one? */ 2923 if (unit == device_get_unit(sc->mlx_sysdrive[i].ms_disk)) 2924 return(&sc->mlx_sysdrive[i]); 2925 } 2926 } 2927 return(NULL); 2928} 2929