nsgphyreg.h revision 76479
1205147Sedwin/* 2 * Copyright (c) 2001 Wind River Systems 3 * Copyright (c) 2001 4 * Bill Paul <wpaul@bsdi.com>. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Bill Paul. 17 * 4. Neither the name of the author nor the names of any co-contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 * $FreeBSD: head/sys/dev/mii/nsgphyreg.h 76479 2001-05-11 19:56:39Z wpaul $ 34 */ 35 36#ifndef _DEV_MII_NSGPHYREG_H_ 37#define _DEV_MII_NSGPHYREG_H_ 38 39/* 40 * NatSemi DP83891 registers 41 */ 42 43#define NSGPHY_MII_BMCR 0x00 44#define NSGPHY_BMCR_RESET 0x8000 45#define NSGPHY_BMCR_LOOP 0x4000 46#define NSGPHY_BMCR_SPD0 0x2000 /* speed select, lower bit */ 47#define NSGPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */ 48#define NSGPHY_BMCR_PDOWN 0x0800 /* Power down */ 49#define NSGPHY_BMCR_ISO 0x0400 /* Isolate */ 50#define NSGPHY_BMCR_STARTNEG 0x0200 /* Restart autoneg */ 51#define NSGPHY_BMCR_FDX 0x0100 /* Duplex mode */ 52#define NSGPHY_BMCR_CTEST 0x0080 /* Collision test enable */ 53#define NSGPHY_BMCR_SPD1 0x0040 /* Speed select, upper bit */ 54 55#define NSGPHY_S1000 NSGPHY_BMCR_SPD1 /* 1000mbps */ 56#define NSGPHY_S100 NSGPHY_BMCR_SPD0 /* 100mpbs */ 57#define NSGPHY_S10 0 /* 10mbps */ 58 59#define NSGPHY_MII_BMSR 0x01 60#define NSGPHY_BMSR_100BT4 0x8000 /* 100baseT4 support */ 61#define NSGPHY_BMSR_100FDX 0x4000 /* 100baseTX full duplex */ 62#define NSGPHY_BMSR_100HDX 0x2000 /* 100baseTX half duplex */ 63#define NSGPHY_BMSR_10FDX 0x1000 /* 10baseT full duplex */ 64#define NSGPHY_BMSR_10HDX 0x0800 /* 10baseT half duplex */ 65#define NSGPHY_BMSR_100T2FDX 0x0400 /* 100baseT2 full duplex */ 66#define NSGPHY_BMSR_100T2HDX 0x0200 /* 100baseT2 full duplex */ 67#define NSGPHY_BMSR_EXTSTS 0x0100 /* 1000baseT Extended status present */ 68#define NSGPHY_BMSR_PRESUB 0x0040 /* Preamble surpression */ 69#define NSGPHY_BMSR_ACOMP 0x0020 /* Autoneg complete */ 70#define NSGPHY_BMSR_RFAULT 0x0010 /* Remote fault condition occured */ 71#define NSGPHY_BMSR_ANEG 0x0008 /* Autoneg capable */ 72#define NSGPHY_BMSR_LINK 0x0004 /* Link status */ 73#define NSGPHY_BMSR_JABBER 0x0002 /* Jabber detected */ 74#define NSGPHY_BMSR_EXT 0x0001 /* Extended capability */ 75 76#define NSGPHY_MII_ANAR 0x04 77#define NSGPHY_ANAR_NP 0x8000 /* Next page */ 78#define NSGPHY_ANAR_RF 0x2000 /* Remote fault */ 79#define NSGPHY_ANAR_ASP 0x0800 /* Asymetric Pause */ 80#define NSGPHY_ANAR_PC 0x0400 /* Pause capable */ 81#define NSGPHY_ANAR_100T4 0x0200 /* 100baseT4 support */ 82#define NSGPHY_ANAR_100FDX 0x0100 /* 100baseTX full duplex support */ 83#define NSGPHY_ANAR_100HDX 0x0080 /* 100baseTX half duplex support */ 84#define NSGPHY_ANAR_10FDX 0x0040 /* 10baseT full duplex support */ 85#define NSGPHY_ANAR_10HDX 0x0020 /* 10baseT half duplex support */ 86#define NSGPHY_ANAR_SEL 0x001F /* selector field, 00001=Ethernet */ 87 88#define NSGPHY_MII_ANLPAR 0x05 89#define NSGPHY_ANLPAR_NP 0x8000 /* Next page */ 90#define NSGPHY_ANLPAR_RF 0x2000 /* Remote fault */ 91#define NSGPHY_ANLPAR_ASP 0x0800 /* Asymetric Pause */ 92#define NSGPHY_ANLPAR_PC 0x0400 /* Pause capable */ 93#define NSGPHY_ANLPAR_100T4 0x0200 /* 100baseT4 support */ 94#define NSGPHY_ANLPAR_100FDX 0x0100 /* 100baseTX full duplex support */ 95#define NSGPHY_ANLPAR_100HDX 0x0080 /* 100baseTX half duplex support */ 96#define NSGPHY_ANLPAR_10FDX 0x0040 /* 10baseT full duplex support */ 97#define NSGPHY_ANLPAR_10HDX 0x0020 /* 10baseT half duplex support */ 98#define NSGPHY_ANLPAR_SEL 0x001F /* selector field, 00001=Ethernet */ 99 100#define NSGPHY_SEL_TYPE 0x0001 /* ethernet */ 101 102#define NSGPHY_MII_ANER 0x06 103#define NSGPHY_ANER_PDF 0x0010 /* Parallel detection fault */ 104#define NSGPHY_ANER_LPNP 0x0008 /* Link partner can next page */ 105#define NSGPHY_ANER_NP 0x0004 /* Local PHY can next page */ 106#define NSGPHY_ANER_RX 0x0002 /* Next page received */ 107#define NSGPHY_ANER_LPAN 0x0001 /* Link partner autoneg capable */ 108 109#define NSGPHY_MII_NEXTP 0x07 /* Next page */ 110#define NSGPHY_NEXTP_NP 0x8000 /* Next page indication */ 111#define NSGPHY_NEXTP_MP 0x2000 /* Message page */ 112#define NSGPHY_NEXTP_ACK2 0x1000 /* Acknowledge 2 */ 113#define NSGPHY_NEXTP_TOGGLE 0x0800 /* Toggle */ 114#define NSGPHY_NEXTP_CODE 0x07FF /* Code field */ 115 116#define NSGPHY_MII_NEXTP_LP 0x08 /* Next page of link partner */ 117#define NSGPHY_NEXTPLP_NP 0x8000 /* Next page indication */ 118#define NSGPHY_NEXTPLP_MP 0x2000 /* Message page */ 119#define NSGPHY_NEXTPLP_ACK2 0x1000 /* Acknowledge 2 */ 120#define NSGPHY_NEXTPLP_TOGGLE 0x0800 /* Toggle */ 121#define NSGPHY_NEXTPLP_CODE 0x07FF /* Code field */ 122 123#define NSGPHY_MII_1000CTL 0x09 /* 1000baseT control */ 124#define NSGPHY_1000CTL_TST 0xE000 /* test modes */ 125#define NSGPHY_1000CTL_MSE 0x1000 /* Master/Slave config enable */ 126#define NSGPHY_1000CTL_MSC 0x0800 /* Master/Slave setting */ 127#define NSGPHY_1000CTL_RD 0x0400 /* Port type: Repeater/DTE */ 128#define NSGPHY_1000CTL_AFD 0x0200 /* Advertise full duplex */ 129#define NSGPHY_1000CTL_AHD 0x0100 /* Advertise half duplex */ 130 131#define NSGPHY_MII_1000STS 0x0A /* 1000baseT status */ 132#define NSGPHY_1000STS_MSF 0x8000 /* Master/slave fault */ 133#define NSGPHY_1000STS_MSR 0x4000 /* Master/slave result */ 134#define NSGPHY_1000STS_LRS 0x2000 /* Local receiver status */ 135#define NSGPHY_1000STS_RRS 0x1000 /* Remote receiver status */ 136#define NSGPHY_1000STS_LPFD 0x0800 /* Link partner can FD */ 137#define NSGPHY_1000STS_LPHD 0x0400 /* Link partner can HD */ 138#define NSGPHY_1000STS_ASM_DIR 0x0200 /* Asymetric pause capable */ 139#define NSGPHY_1000STS_IEC 0x00FF /* Idle error count */ 140 141#define NSGPHY_MII_EXTSTS 0x0F /* Extended status */ 142#define NSGPHY_EXTSTS_X_FD_CAP 0x8000 /* 1000base-X FD capable */ 143#define NSGPHY_EXTSTS_X_HD_CAP 0x4000 /* 1000base-X HD capable */ 144#define NSGPHY_EXTSTS_T_FD_CAP 0x2000 /* 1000base-T FD capable */ 145#define NSGPHY_EXTSTS_T_HD_CAP 0x1000 /* 1000base-T HD capable */ 146 147#define NSGPHY_MII_STRAPOPT 0x10 /* Strap options */ 148#define NSGPHY_STRAPOPT_PHYADDR 0xF800 /* PHY address */ 149#define NSGPHY_STRAPOPT_COMPAT 0x0400 /* Broadcom compat mode */ 150#define NSGPHY_STRAPOPT_MMSE 0x0200 /* Manual master/slave enable */ 151#define NSGPHY_STRAPOPT_ANEG 0x0100 /* Autoneg enable */ 152#define NSGPHY_STRAPOPT_MMSV 0x0080 /* Manual master/slave setting */ 153#define NSGPHY_STRAPOPT_1000HDX 0x0010 /* Advertise 1000 half-duplex */ 154#define NSGPHY_STRAPOPT_1000FDX 0x0008 /* Advertise 1000 full-duplex */ 155#define NSGPHY_STRAPOPT_100_ADV 0x0004 /* Advertise 100 full/half-duplex */ 156#define NSGPHY_STRAPOPT_SPDSEL 0x0003 /* speed selection */ 157 158#define NSGPHY_MII_PHYSUP 0x11 /* PHY support/current status */ 159#define NSGPHY_PHYSUP_SPDSTS 0x0018 /* speed status */ 160#define NSGPHY_PHYSUP_LNKSTS 0x0004 /* link status */ 161#define NSGPHY_PHYSUP_DUPSTS 0x0002 /* duplex status 1 == full */ 162#define NSGPHY_PHYSUP_10BT 0x0001 /* 10baseT resolved */ 163 164#define NSGPHY_SPDSTS_1000 0x0010 165#define NSGPHY_SPDSTS_100 0x0008 166#define NSGPHY_SPDSTS_10 0x0000 167 168#endif /* _DEV_NSGPHY_MIIREG_H_ */ 169