isp.c revision 154704
1/*- 2 * Machine and OS Independent (well, as best as possible) 3 * code for the Qlogic ISP SCSI adapters. 4 * 5 * Copyright (c) 1997-2006 by Matthew Jacob 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice immediately at the beginning of the file, without modification, 13 * this list of conditions, and the following disclaimer. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30/* 31 * Inspiration and ideas about this driver are from Erik Moe's Linux driver 32 * (qlogicisp.c) and Dave Miller's SBus version of same (qlogicisp.c). Some 33 * ideas dredged from the Solaris driver. 34 */ 35 36/* 37 * Include header file appropriate for platform we're building on. 38 */ 39 40#ifdef __NetBSD__ 41#include <dev/ic/isp_netbsd.h> 42#endif 43#ifdef __FreeBSD__ 44#include <sys/cdefs.h> 45__FBSDID("$FreeBSD: head/sys/dev/isp/isp.c 154704 2006-01-23 06:23:37Z mjacob $"); 46#include <dev/isp/isp_freebsd.h> 47#endif 48#ifdef __OpenBSD__ 49#include <dev/ic/isp_openbsd.h> 50#endif 51#ifdef __linux__ 52#include "isp_linux.h" 53#endif 54#ifdef __svr4__ 55#include "isp_solaris.h" 56#endif 57 58/* 59 * General defines 60 */ 61 62#define MBOX_DELAY_COUNT 1000000 / 100 63 64/* 65 * Local static data 66 */ 67static const char portshift[] = 68 "Target %d Loop ID 0x%x (Port 0x%x) => Loop 0x%x (Port 0x%x)"; 69static const char portdup[] = 70 "Target %d duplicates Target %d- killing off both"; 71static const char retained[] = 72 "Retaining Loop ID 0x%x for Target %d (Port 0x%x)"; 73static const char lretained[] = 74 "Retained login of Target %d (Loop ID 0x%x) Port 0x%x"; 75static const char plogout[] = 76 "Logging out Target %d at Loop ID 0x%x (Port 0x%x)"; 77static const char plogierr[] = 78 "Command Error in PLOGI for Port 0x%x (0x%x)"; 79static const char nopdb[] = 80 "Could not get PDB for Device @ Port 0x%x"; 81static const char pdbmfail1[] = 82 "PDB Loop ID info for Device @ Port 0x%x does not match up (0x%x)"; 83static const char pdbmfail2[] = 84 "PDB Port info for Device @ Port 0x%x does not match up (0x%x)"; 85static const char ldumped[] = 86 "Target %d (Loop ID 0x%x) Port 0x%x dumped after login info mismatch"; 87static const char notresp[] = 88 "Not RESPONSE in RESPONSE Queue (type 0x%x) @ idx %d (next %d) nlooked %d"; 89static const char xact1[] = 90 "HBA attempted queued transaction with disconnect not set for %d.%d.%d"; 91static const char xact2[] = 92 "HBA attempted queued transaction to target routine %d on target %d bus %d"; 93static const char xact3[] = 94 "HBA attempted queued cmd for %d.%d.%d when queueing disabled"; 95static const char pskip[] = 96 "SCSI phase skipped for target %d.%d.%d"; 97static const char topology[] = 98 "Loop ID %d, Port ID 0x%x, Loop State 0x%x, Topology '%s'"; 99static const char swrej[] = 100 "Fabric Nameserver rejected %s (Reason=0x%x Expl=0x%x) for Port ID 0x%x"; 101static const char finmsg[] = 102 "(%d.%d.%d): FIN dl%d resid %d STS 0x%x SKEY %c XS_ERR=0x%x"; 103static const char sc0[] = 104 "%s CHAN %d FTHRSH %d IID %d RESETD %d RETRYC %d RETRYD %d ASD 0x%x"; 105static const char sc1[] = 106 "%s RAAN 0x%x DLAN 0x%x DDMAB 0x%x CDMAB 0x%x SELTIME %d MQD %d"; 107static const char sc2[] = "%s CHAN %d TGT %d FLAGS 0x%x 0x%x/0x%x"; 108static const char sc3[] = "Generated"; 109static const char sc4[] = "NVRAM"; 110static const char bun[] = 111 "bad underrun for %d.%d (count %d, resid %d, status %s)"; 112 113/* 114 * Local function prototypes. 115 */ 116static int isp_parse_async(struct ispsoftc *, u_int16_t); 117static int isp_handle_other_response(struct ispsoftc *, int, isphdr_t *, 118 u_int16_t *); 119static void 120isp_parse_status(struct ispsoftc *, ispstatusreq_t *, XS_T *); 121static void isp_fastpost_complete(struct ispsoftc *, u_int16_t); 122static int isp_mbox_continue(struct ispsoftc *); 123static void isp_scsi_init(struct ispsoftc *); 124static void isp_scsi_channel_init(struct ispsoftc *, int); 125static void isp_fibre_init(struct ispsoftc *); 126static void isp_mark_getpdb_all(struct ispsoftc *); 127static int isp_getmap(struct ispsoftc *, fcpos_map_t *); 128static int isp_getpdb(struct ispsoftc *, int, isp_pdb_t *); 129static u_int64_t isp_get_portname(struct ispsoftc *, int, int); 130static int isp_fclink_test(struct ispsoftc *, int); 131static char *isp2100_fw_statename(int); 132static int isp_pdb_sync(struct ispsoftc *); 133static int isp_scan_loop(struct ispsoftc *); 134static int isp_fabric_mbox_cmd(struct ispsoftc *, mbreg_t *); 135static int isp_scan_fabric(struct ispsoftc *, int); 136static void isp_register_fc4_type(struct ispsoftc *); 137static void isp_fw_state(struct ispsoftc *); 138static void isp_mboxcmd_qnw(struct ispsoftc *, mbreg_t *, int); 139static void isp_mboxcmd(struct ispsoftc *, mbreg_t *, int); 140 141static void isp_update(struct ispsoftc *); 142static void isp_update_bus(struct ispsoftc *, int); 143static void isp_setdfltparm(struct ispsoftc *, int); 144static int isp_read_nvram(struct ispsoftc *); 145static void isp_rdnvram_word(struct ispsoftc *, int, u_int16_t *); 146static void isp_parse_nvram_1020(struct ispsoftc *, u_int8_t *); 147static void isp_parse_nvram_1080(struct ispsoftc *, int, u_int8_t *); 148static void isp_parse_nvram_12160(struct ispsoftc *, int, u_int8_t *); 149static void isp_parse_nvram_2100(struct ispsoftc *, u_int8_t *); 150 151/* 152 * Reset Hardware. 153 * 154 * Hit the chip over the head, download new f/w if available and set it running. 155 * 156 * Locking done elsewhere. 157 */ 158 159void 160isp_reset(struct ispsoftc *isp) 161{ 162 mbreg_t mbs; 163 u_int16_t code_org; 164 int loops, i, dodnld = 1; 165 char *btype = "????"; 166 167 isp->isp_state = ISP_NILSTATE; 168 MEMZERO(&mbs, sizeof (mbs)); 169 170 /* 171 * Basic types (SCSI, FibreChannel and PCI or SBus) 172 * have been set in the MD code. We figure out more 173 * here. Possibly more refined types based upon PCI 174 * identification. Chip revision has been gathered. 175 * 176 * After we've fired this chip up, zero out the conf1 register 177 * for SCSI adapters and do other settings for the 2100. 178 */ 179 180 /* 181 * Get the current running firmware revision out of the 182 * chip before we hit it over the head (if this is our 183 * first time through). Note that we store this as the 184 * 'ROM' firmware revision- which it may not be. In any 185 * case, we don't really use this yet, but we may in 186 * the future. 187 */ 188 if (isp->isp_touched == 0) { 189 /* 190 * First see whether or not we're sitting in the ISP PROM. 191 * If we've just been reset, we'll have the string "ISP " 192 * spread through outgoing mailbox registers 1-3. We do 193 * this for PCI cards because otherwise we really don't 194 * know what state the card is in and we could hang if 195 * we try this command otherwise. 196 * 197 * For SBus cards, we just do this because they almost 198 * certainly will be running firmware by now. 199 */ 200 if (ISP_READ(isp, OUTMAILBOX1) != 0x4953 || 201 ISP_READ(isp, OUTMAILBOX2) != 0x5020 || 202 ISP_READ(isp, OUTMAILBOX3) != 0x2020) { 203 /* 204 * Just in case it was paused... 205 */ 206 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); 207 mbs.param[0] = MBOX_ABOUT_FIRMWARE; 208 isp_mboxcmd(isp, &mbs, MBLOGNONE); 209 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 210 isp->isp_romfw_rev[0] = mbs.param[1]; 211 isp->isp_romfw_rev[1] = mbs.param[2]; 212 isp->isp_romfw_rev[2] = mbs.param[3]; 213 } 214 } 215 isp->isp_touched = 1; 216 } 217 218 DISABLE_INTS(isp); 219 220 /* 221 * Set up default request/response queue in-pointer/out-pointer 222 * register indices. 223 */ 224 if (IS_23XX(isp)) { 225 isp->isp_rqstinrp = BIU_REQINP; 226 isp->isp_rqstoutrp = BIU_REQOUTP; 227 isp->isp_respinrp = BIU_RSPINP; 228 isp->isp_respoutrp = BIU_RSPOUTP; 229 } else { 230 isp->isp_rqstinrp = INMAILBOX4; 231 isp->isp_rqstoutrp = OUTMAILBOX4; 232 isp->isp_respinrp = OUTMAILBOX5; 233 isp->isp_respoutrp = INMAILBOX5; 234 } 235 236 /* 237 * Put the board into PAUSE mode (so we can read the SXP registers 238 * or write FPM/FBM registers). 239 */ 240 ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE); 241 242 if (IS_FC(isp)) { 243 switch (isp->isp_type) { 244 case ISP_HA_FC_2100: 245 btype = "2100"; 246 break; 247 case ISP_HA_FC_2200: 248 btype = "2200"; 249 break; 250 case ISP_HA_FC_2300: 251 btype = "2300"; 252 break; 253 case ISP_HA_FC_2312: 254 btype = "2312"; 255 break; 256 case ISP_HA_FC_2322: 257 btype = "2322"; 258 break; 259 case ISP_HA_FC_2422: 260 btype = "2422"; 261 break; 262 default: 263 break; 264 } 265 /* 266 * While we're paused, reset the FPM module and FBM fifos. 267 */ 268 ISP_WRITE(isp, BIU2100_CSR, BIU2100_FPM0_REGS); 269 ISP_WRITE(isp, FPM_DIAG_CONFIG, FPM_SOFT_RESET); 270 ISP_WRITE(isp, BIU2100_CSR, BIU2100_FB_REGS); 271 ISP_WRITE(isp, FBM_CMD, FBMCMD_FIFO_RESET_ALL); 272 ISP_WRITE(isp, BIU2100_CSR, BIU2100_RISC_REGS); 273 } else if (IS_1240(isp)) { 274 sdparam *sdp = isp->isp_param; 275 btype = "1240"; 276 isp->isp_clock = 60; 277 sdp->isp_ultramode = 1; 278 sdp++; 279 sdp->isp_ultramode = 1; 280 /* 281 * XXX: Should probably do some bus sensing. 282 */ 283 } else if (IS_ULTRA2(isp)) { 284 static const char m[] = "bus %d is in %s Mode"; 285 u_int16_t l; 286 sdparam *sdp = isp->isp_param; 287 288 isp->isp_clock = 100; 289 290 if (IS_1280(isp)) 291 btype = "1280"; 292 else if (IS_1080(isp)) 293 btype = "1080"; 294 else if (IS_10160(isp)) 295 btype = "10160"; 296 else if (IS_12160(isp)) 297 btype = "12160"; 298 else 299 btype = "<UNKLVD>"; 300 301 l = ISP_READ(isp, SXP_PINS_DIFF) & ISP1080_MODE_MASK; 302 switch (l) { 303 case ISP1080_LVD_MODE: 304 sdp->isp_lvdmode = 1; 305 isp_prt(isp, ISP_LOGCONFIG, m, 0, "LVD"); 306 break; 307 case ISP1080_HVD_MODE: 308 sdp->isp_diffmode = 1; 309 isp_prt(isp, ISP_LOGCONFIG, m, 0, "Differential"); 310 break; 311 case ISP1080_SE_MODE: 312 sdp->isp_ultramode = 1; 313 isp_prt(isp, ISP_LOGCONFIG, m, 0, "Single-Ended"); 314 break; 315 default: 316 isp_prt(isp, ISP_LOGERR, 317 "unknown mode on bus %d (0x%x)", 0, l); 318 break; 319 } 320 321 if (IS_DUALBUS(isp)) { 322 sdp++; 323 l = ISP_READ(isp, SXP_PINS_DIFF|SXP_BANK1_SELECT); 324 l &= ISP1080_MODE_MASK; 325 switch(l) { 326 case ISP1080_LVD_MODE: 327 sdp->isp_lvdmode = 1; 328 isp_prt(isp, ISP_LOGCONFIG, m, 1, "LVD"); 329 break; 330 case ISP1080_HVD_MODE: 331 sdp->isp_diffmode = 1; 332 isp_prt(isp, ISP_LOGCONFIG, 333 m, 1, "Differential"); 334 break; 335 case ISP1080_SE_MODE: 336 sdp->isp_ultramode = 1; 337 isp_prt(isp, ISP_LOGCONFIG, 338 m, 1, "Single-Ended"); 339 break; 340 default: 341 isp_prt(isp, ISP_LOGERR, 342 "unknown mode on bus %d (0x%x)", 1, l); 343 break; 344 } 345 } 346 } else { 347 sdparam *sdp = isp->isp_param; 348 i = ISP_READ(isp, BIU_CONF0) & BIU_CONF0_HW_MASK; 349 switch (i) { 350 default: 351 isp_prt(isp, ISP_LOGALL, "Unknown Chip Type 0x%x", i); 352 /* FALLTHROUGH */ 353 case 1: 354 btype = "1020"; 355 isp->isp_type = ISP_HA_SCSI_1020; 356 isp->isp_clock = 40; 357 break; 358 case 2: 359 /* 360 * Some 1020A chips are Ultra Capable, but don't 361 * run the clock rate up for that unless told to 362 * do so by the Ultra Capable bits being set. 363 */ 364 btype = "1020A"; 365 isp->isp_type = ISP_HA_SCSI_1020A; 366 isp->isp_clock = 40; 367 break; 368 case 3: 369 btype = "1040"; 370 isp->isp_type = ISP_HA_SCSI_1040; 371 isp->isp_clock = 60; 372 break; 373 case 4: 374 btype = "1040A"; 375 isp->isp_type = ISP_HA_SCSI_1040A; 376 isp->isp_clock = 60; 377 break; 378 case 5: 379 btype = "1040B"; 380 isp->isp_type = ISP_HA_SCSI_1040B; 381 isp->isp_clock = 60; 382 break; 383 case 6: 384 btype = "1040C"; 385 isp->isp_type = ISP_HA_SCSI_1040C; 386 isp->isp_clock = 60; 387 break; 388 } 389 /* 390 * Now, while we're at it, gather info about ultra 391 * and/or differential mode. 392 */ 393 if (ISP_READ(isp, SXP_PINS_DIFF) & SXP_PINS_DIFF_MODE) { 394 isp_prt(isp, ISP_LOGCONFIG, "Differential Mode"); 395 sdp->isp_diffmode = 1; 396 } else { 397 sdp->isp_diffmode = 0; 398 } 399 i = ISP_READ(isp, RISC_PSR); 400 if (isp->isp_bustype == ISP_BT_SBUS) { 401 i &= RISC_PSR_SBUS_ULTRA; 402 } else { 403 i &= RISC_PSR_PCI_ULTRA; 404 } 405 if (i != 0) { 406 isp_prt(isp, ISP_LOGCONFIG, "Ultra Mode Capable"); 407 sdp->isp_ultramode = 1; 408 /* 409 * If we're in Ultra Mode, we have to be 60MHz clock- 410 * even for the SBus version. 411 */ 412 isp->isp_clock = 60; 413 } else { 414 sdp->isp_ultramode = 0; 415 /* 416 * Clock is known. Gronk. 417 */ 418 } 419 420 /* 421 * Machine dependent clock (if set) overrides 422 * our generic determinations. 423 */ 424 if (isp->isp_mdvec->dv_clock) { 425 if (isp->isp_mdvec->dv_clock < isp->isp_clock) { 426 isp->isp_clock = isp->isp_mdvec->dv_clock; 427 } 428 } 429 430 } 431 432 /* 433 * Clear instrumentation 434 */ 435 isp->isp_intcnt = isp->isp_intbogus = 0; 436 437 /* 438 * Do MD specific pre initialization 439 */ 440 ISP_RESET0(isp); 441 442again: 443 444 /* 445 * Hit the chip over the head with hammer, 446 * and give the ISP a chance to recover. 447 */ 448 449 if (IS_SCSI(isp)) { 450 ISP_WRITE(isp, BIU_ICR, BIU_ICR_SOFT_RESET); 451 /* 452 * A slight delay... 453 */ 454 USEC_DELAY(100); 455 456 /* 457 * Clear data && control DMA engines. 458 */ 459 ISP_WRITE(isp, CDMA_CONTROL, 460 DMA_CNTRL_CLEAR_CHAN | DMA_CNTRL_RESET_INT); 461 ISP_WRITE(isp, DDMA_CONTROL, 462 DMA_CNTRL_CLEAR_CHAN | DMA_CNTRL_RESET_INT); 463 464 465 } else { 466 ISP_WRITE(isp, BIU2100_CSR, BIU2100_SOFT_RESET); 467 /* 468 * A slight delay... 469 */ 470 USEC_DELAY(100); 471 472 /* 473 * Clear data && control DMA engines. 474 */ 475 ISP_WRITE(isp, CDMA2100_CONTROL, 476 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 477 ISP_WRITE(isp, TDMA2100_CONTROL, 478 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 479 ISP_WRITE(isp, RDMA2100_CONTROL, 480 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 481 } 482 483 /* 484 * Wait for ISP to be ready to go... 485 */ 486 loops = MBOX_DELAY_COUNT; 487 for (;;) { 488 if (IS_SCSI(isp)) { 489 if (!(ISP_READ(isp, BIU_ICR) & BIU_ICR_SOFT_RESET)) 490 break; 491 } else { 492 if (!(ISP_READ(isp, BIU2100_CSR) & BIU2100_SOFT_RESET)) 493 break; 494 } 495 USEC_DELAY(100); 496 if (--loops < 0) { 497 ISP_DUMPREGS(isp, "chip reset timed out"); 498 return; 499 } 500 } 501 502 /* 503 * After we've fired this chip up, zero out the conf1 register 504 * for SCSI adapters and other settings for the 2100. 505 */ 506 507 if (IS_SCSI(isp)) { 508 ISP_WRITE(isp, BIU_CONF1, 0); 509 } else { 510 ISP_WRITE(isp, BIU2100_CSR, 0); 511 } 512 513 /* 514 * Reset RISC Processor 515 */ 516 ISP_WRITE(isp, HCCR, HCCR_CMD_RESET); 517 USEC_DELAY(100); 518 /* Clear semaphore register (just to be sure) */ 519 ISP_WRITE(isp, BIU_SEMA, 0); 520 521 /* 522 * Establish some initial burst rate stuff. 523 * (only for the 1XX0 boards). This really should 524 * be done later after fetching from NVRAM. 525 */ 526 if (IS_SCSI(isp)) { 527 u_int16_t tmp = isp->isp_mdvec->dv_conf1; 528 /* 529 * Busted FIFO. Turn off all but burst enables. 530 */ 531 if (isp->isp_type == ISP_HA_SCSI_1040A) { 532 tmp &= BIU_BURST_ENABLE; 533 } 534 ISP_SETBITS(isp, BIU_CONF1, tmp); 535 if (tmp & BIU_BURST_ENABLE) { 536 ISP_SETBITS(isp, CDMA_CONF, DMA_ENABLE_BURST); 537 ISP_SETBITS(isp, DDMA_CONF, DMA_ENABLE_BURST); 538 } 539#ifdef PTI_CARDS 540 if (((sdparam *) isp->isp_param)->isp_ultramode) { 541 while (ISP_READ(isp, RISC_MTR) != 0x1313) { 542 ISP_WRITE(isp, RISC_MTR, 0x1313); 543 ISP_WRITE(isp, HCCR, HCCR_CMD_STEP); 544 } 545 } else { 546 ISP_WRITE(isp, RISC_MTR, 0x1212); 547 } 548 /* 549 * PTI specific register 550 */ 551 ISP_WRITE(isp, RISC_EMB, DUAL_BANK) 552#else 553 ISP_WRITE(isp, RISC_MTR, 0x1212); 554#endif 555 } else { 556 ISP_WRITE(isp, RISC_MTR2100, 0x1212); 557 if (IS_2200(isp) || IS_23XX(isp)) { 558 ISP_WRITE(isp, HCCR, HCCR_2X00_DISABLE_PARITY_PAUSE); 559 } 560 } 561 562 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); /* release paused processor */ 563 564 /* 565 * Do MD specific post initialization 566 */ 567 ISP_RESET1(isp); 568 569 /* 570 * Wait for everything to finish firing up. 571 * 572 * Avoid doing this on the 2312 because you can generate a PCI 573 * parity error (chip breakage). 574 */ 575 if (IS_23XX(isp)) { 576 USEC_DELAY(5); 577 } else { 578 loops = MBOX_DELAY_COUNT; 579 while (ISP_READ(isp, OUTMAILBOX0) == MBOX_BUSY) { 580 USEC_DELAY(100); 581 if (--loops < 0) { 582 isp_prt(isp, ISP_LOGERR, 583 "MBOX_BUSY never cleared on reset"); 584 return; 585 } 586 } 587 } 588 589 /* 590 * Up until this point we've done everything by just reading or 591 * setting registers. From this point on we rely on at least *some* 592 * kind of firmware running in the card. 593 */ 594 595 /* 596 * Do some sanity checking. 597 */ 598 mbs.param[0] = MBOX_NO_OP; 599 isp_mboxcmd(isp, &mbs, MBLOGALL); 600 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 601 return; 602 } 603 604 if (IS_SCSI(isp)) { 605 mbs.param[0] = MBOX_MAILBOX_REG_TEST; 606 mbs.param[1] = 0xdead; 607 mbs.param[2] = 0xbeef; 608 mbs.param[3] = 0xffff; 609 mbs.param[4] = 0x1111; 610 mbs.param[5] = 0xa5a5; 611 isp_mboxcmd(isp, &mbs, MBLOGALL); 612 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 613 return; 614 } 615 if (mbs.param[1] != 0xdead || mbs.param[2] != 0xbeef || 616 mbs.param[3] != 0xffff || mbs.param[4] != 0x1111 || 617 mbs.param[5] != 0xa5a5) { 618 isp_prt(isp, ISP_LOGERR, 619 "Register Test Failed (0x%x 0x%x 0x%x 0x%x 0x%x)", 620 mbs.param[1], mbs.param[2], mbs.param[3], 621 mbs.param[4], mbs.param[5]); 622 return; 623 } 624 625 } 626 627 /* 628 * Download new Firmware, unless requested not to do so. 629 * This is made slightly trickier in some cases where the 630 * firmware of the ROM revision is newer than the revision 631 * compiled into the driver. So, where we used to compare 632 * versions of our f/w and the ROM f/w, now we just see 633 * whether we have f/w at all and whether a config flag 634 * has disabled our download. 635 */ 636 if ((isp->isp_mdvec->dv_ispfw == NULL) || 637 (isp->isp_confopts & ISP_CFG_NORELOAD)) { 638 dodnld = 0; 639 } 640 641 if (IS_23XX(isp)) 642 code_org = ISP_CODE_ORG_2300; 643 else 644 code_org = ISP_CODE_ORG; 645 646 if (dodnld) { 647 isp->isp_mbxworkp = (void *) &isp->isp_mdvec->dv_ispfw[1]; 648 isp->isp_mbxwrk0 = isp->isp_mdvec->dv_ispfw[3] - 1; 649 isp->isp_mbxwrk1 = code_org + 1; 650 mbs.param[0] = MBOX_WRITE_RAM_WORD; 651 mbs.param[1] = code_org; 652 mbs.param[2] = isp->isp_mdvec->dv_ispfw[0]; 653 isp_mboxcmd(isp, &mbs, MBLOGNONE); 654 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 655 isp_prt(isp, ISP_LOGERR, 656 "F/W download failed at word %d", 657 isp->isp_mbxwrk1 - code_org); 658 dodnld = 0; 659 goto again; 660 } 661 /* 662 * Verify that it downloaded correctly. 663 */ 664 mbs.param[0] = MBOX_VERIFY_CHECKSUM; 665 mbs.param[1] = code_org; 666 isp_mboxcmd(isp, &mbs, MBLOGNONE); 667 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 668 isp_prt(isp, ISP_LOGERR, "Ram Checksum Failure"); 669 return; 670 } 671 isp->isp_loaded_fw = 1; 672 } else { 673 isp->isp_loaded_fw = 0; 674 isp_prt(isp, ISP_LOGDEBUG2, "skipping f/w download"); 675 } 676 677 /* 678 * Now start it rolling. 679 * 680 * If we didn't actually download f/w, 681 * we still need to (re)start it. 682 */ 683 684 685 mbs.param[0] = MBOX_EXEC_FIRMWARE; 686 mbs.param[1] = code_org; 687 if (IS_2322(isp) || IS_24XX(isp)) { 688 if (isp->isp_loaded_fw) { 689 mbs.param[2] = 1; 690 } else { 691 mbs.param[2] = 0; 692 } 693 mbs.obits |= 2; 694 } 695 696 isp_mboxcmd(isp, &mbs, MBLOGNONE); 697 /* 698 * Give it a chance to start. 699 */ 700 USEC_DELAY(500); 701 702 if (IS_SCSI(isp)) { 703 /* 704 * Set CLOCK RATE, but only if asked to. 705 */ 706 if (isp->isp_clock) { 707 mbs.param[0] = MBOX_SET_CLOCK_RATE; 708 mbs.param[1] = isp->isp_clock; 709 isp_mboxcmd(isp, &mbs, MBLOGALL); 710 /* we will try not to care if this fails */ 711 } 712 } 713 714 mbs.param[0] = MBOX_ABOUT_FIRMWARE; 715 isp_mboxcmd(isp, &mbs, MBLOGALL); 716 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 717 return; 718 } 719 720 /* 721 * The SBus firmware that we are using apparently does not return 722 * major, minor, micro revisions in the mailbox registers, which 723 * is really, really, annoying. 724 */ 725 if (ISP_SBUS_SUPPORTED && isp->isp_bustype == ISP_BT_SBUS) { 726 if (dodnld) { 727#ifdef ISP_TARGET_MODE 728 isp->isp_fwrev[0] = 7; 729 isp->isp_fwrev[1] = 55; 730#else 731 isp->isp_fwrev[0] = 1; 732 isp->isp_fwrev[1] = 37; 733#endif 734 isp->isp_fwrev[2] = 0; 735 } 736 } else { 737 isp->isp_fwrev[0] = mbs.param[1]; 738 isp->isp_fwrev[1] = mbs.param[2]; 739 isp->isp_fwrev[2] = mbs.param[3]; 740 } 741 isp_prt(isp, ISP_LOGCONFIG, 742 "Board Type %s, Chip Revision 0x%x, %s F/W Revision %d.%d.%d", 743 btype, isp->isp_revision, dodnld? "loaded" : "resident", 744 isp->isp_fwrev[0], isp->isp_fwrev[1], isp->isp_fwrev[2]); 745 746 if (IS_FC(isp)) { 747 /* 748 * We do not believe firmware attributes for 2100 code less 749 * than 1.17.0, unless it's the firmware we specifically 750 * are loading. 751 * 752 * Note that all 22XX and 23XX f/w is greater than 1.X.0. 753 */ 754 if (!(ISP_FW_NEWER_THAN(isp, 1, 17, 0))) { 755#ifdef USE_SMALLER_2100_FIRMWARE 756 FCPARAM(isp)->isp_fwattr = ISP_FW_ATTR_SCCLUN; 757#else 758 FCPARAM(isp)->isp_fwattr = 0; 759#endif 760 } else { 761 FCPARAM(isp)->isp_fwattr = mbs.param[6]; 762 isp_prt(isp, ISP_LOGDEBUG0, 763 "Firmware Attributes = 0x%x", mbs.param[6]); 764 } 765 if (IS_2KLOGIN(isp)) { 766 isp_prt(isp, ISP_LOGCONFIG, "2K Logins Supported"); 767 } 768 } 769 770 if (isp->isp_romfw_rev[0] || isp->isp_romfw_rev[1] || 771 isp->isp_romfw_rev[2]) { 772 isp_prt(isp, ISP_LOGCONFIG, "Last F/W revision was %d.%d.%d", 773 isp->isp_romfw_rev[0], isp->isp_romfw_rev[1], 774 isp->isp_romfw_rev[2]); 775 } 776 777 mbs.param[0] = MBOX_GET_FIRMWARE_STATUS; 778 isp_mboxcmd(isp, &mbs, MBLOGALL); 779 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 780 return; 781 } 782 isp->isp_maxcmds = mbs.param[2]; 783 isp_prt(isp, ISP_LOGINFO, 784 "%d max I/O commands supported", mbs.param[2]); 785 isp_fw_state(isp); 786 787 /* 788 * Set up DMA for the request and result mailboxes. 789 */ 790 if (ISP_MBOXDMASETUP(isp) != 0) { 791 isp_prt(isp, ISP_LOGERR, "Cannot setup DMA"); 792 return; 793 } 794 isp->isp_state = ISP_RESETSTATE; 795 796 /* 797 * Okay- now that we have new firmware running, we now (re)set our 798 * notion of how many luns we support. This is somewhat tricky because 799 * if we haven't loaded firmware, we sometimes do not have an easy way 800 * of knowing how many luns we support. 801 * 802 * Expanded lun firmware gives you 32 luns for SCSI cards and 803 * 16384 luns for Fibre Channel cards. 804 * 805 * It turns out that even for QLogic 2100s with ROM 1.10 and above 806 * we do get a firmware attributes word returned in mailbox register 6. 807 * 808 * Because the lun is in a different position in the Request Queue 809 * Entry structure for Fibre Channel with expanded lun firmware, we 810 * can only support one lun (lun zero) when we don't know what kind 811 * of firmware we're running. 812 */ 813 if (IS_SCSI(isp)) { 814 if (dodnld) { 815 if (IS_ULTRA2(isp) || IS_ULTRA3(isp)) { 816 isp->isp_maxluns = 32; 817 } else { 818 isp->isp_maxluns = 8; 819 } 820 } else { 821 isp->isp_maxluns = 8; 822 } 823 } else { 824 if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) { 825 isp->isp_maxluns = 16384; 826 } else { 827 isp->isp_maxluns = 16; 828 } 829 } 830} 831 832/* 833 * Initialize Parameters of Hardware to a known state. 834 * 835 * Locks are held before coming here. 836 */ 837 838void 839isp_init(struct ispsoftc *isp) 840{ 841 /* 842 * Must do this first to get defaults established. 843 */ 844 isp_setdfltparm(isp, 0); 845 if (IS_DUALBUS(isp)) { 846 isp_setdfltparm(isp, 1); 847 } 848 if (IS_FC(isp)) { 849 isp_fibre_init(isp); 850 } else { 851 isp_scsi_init(isp); 852 } 853} 854 855static void 856isp_scsi_init(struct ispsoftc *isp) 857{ 858 sdparam *sdp_chan0, *sdp_chan1; 859 mbreg_t mbs; 860 861 sdp_chan0 = isp->isp_param; 862 sdp_chan1 = sdp_chan0; 863 if (IS_DUALBUS(isp)) { 864 sdp_chan1++; 865 } 866 867 /* 868 * If we have no role (neither target nor initiator), return. 869 */ 870 if (isp->isp_role == ISP_ROLE_NONE) { 871 return; 872 } 873 874 /* First do overall per-card settings. */ 875 876 /* 877 * If we have fast memory timing enabled, turn it on. 878 */ 879 if (sdp_chan0->isp_fast_mttr) { 880 ISP_WRITE(isp, RISC_MTR, 0x1313); 881 } 882 883 /* 884 * Set Retry Delay and Count. 885 * You set both channels at the same time. 886 */ 887 MEMZERO(&mbs, sizeof (mbs)); 888 mbs.param[0] = MBOX_SET_RETRY_COUNT; 889 mbs.param[1] = sdp_chan0->isp_retry_count; 890 mbs.param[2] = sdp_chan0->isp_retry_delay; 891 mbs.param[6] = sdp_chan1->isp_retry_count; 892 mbs.param[7] = sdp_chan1->isp_retry_delay; 893 894 isp_mboxcmd(isp, &mbs, MBLOGALL); 895 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 896 return; 897 } 898 899 /* 900 * Set ASYNC DATA SETUP time. This is very important. 901 */ 902 mbs.param[0] = MBOX_SET_ASYNC_DATA_SETUP_TIME; 903 mbs.param[1] = sdp_chan0->isp_async_data_setup; 904 mbs.param[2] = sdp_chan1->isp_async_data_setup; 905 isp_mboxcmd(isp, &mbs, MBLOGALL); 906 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 907 return; 908 } 909 910 /* 911 * Set ACTIVE Negation State. 912 */ 913 mbs.param[0] = MBOX_SET_ACT_NEG_STATE; 914 mbs.param[1] = 915 (sdp_chan0->isp_req_ack_active_neg << 4) | 916 (sdp_chan0->isp_data_line_active_neg << 5); 917 mbs.param[2] = 918 (sdp_chan1->isp_req_ack_active_neg << 4) | 919 (sdp_chan1->isp_data_line_active_neg << 5); 920 921 isp_mboxcmd(isp, &mbs, MBLOGNONE); 922 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 923 isp_prt(isp, ISP_LOGERR, 924 "failed to set active negation state (%d,%d), (%d,%d)", 925 sdp_chan0->isp_req_ack_active_neg, 926 sdp_chan0->isp_data_line_active_neg, 927 sdp_chan1->isp_req_ack_active_neg, 928 sdp_chan1->isp_data_line_active_neg); 929 /* 930 * But don't return. 931 */ 932 } 933 934 /* 935 * Set the Tag Aging limit 936 */ 937 mbs.param[0] = MBOX_SET_TAG_AGE_LIMIT; 938 mbs.param[1] = sdp_chan0->isp_tag_aging; 939 mbs.param[2] = sdp_chan1->isp_tag_aging; 940 isp_mboxcmd(isp, &mbs, MBLOGALL); 941 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 942 isp_prt(isp, ISP_LOGERR, "failed to set tag age limit (%d,%d)", 943 sdp_chan0->isp_tag_aging, sdp_chan1->isp_tag_aging); 944 return; 945 } 946 947 /* 948 * Set selection timeout. 949 */ 950 mbs.param[0] = MBOX_SET_SELECT_TIMEOUT; 951 mbs.param[1] = sdp_chan0->isp_selection_timeout; 952 mbs.param[2] = sdp_chan1->isp_selection_timeout; 953 isp_mboxcmd(isp, &mbs, MBLOGALL); 954 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 955 return; 956 } 957 958 /* now do per-channel settings */ 959 isp_scsi_channel_init(isp, 0); 960 if (IS_DUALBUS(isp)) 961 isp_scsi_channel_init(isp, 1); 962 963 /* 964 * Now enable request/response queues 965 */ 966 967 if (IS_ULTRA2(isp) || IS_1240(isp)) { 968 mbs.param[0] = MBOX_INIT_RES_QUEUE_A64; 969 mbs.param[1] = RESULT_QUEUE_LEN(isp); 970 mbs.param[2] = DMA_WD1(isp->isp_result_dma); 971 mbs.param[3] = DMA_WD0(isp->isp_result_dma); 972 mbs.param[4] = 0; 973 mbs.param[6] = DMA_WD3(isp->isp_result_dma); 974 mbs.param[7] = DMA_WD2(isp->isp_result_dma); 975 isp_mboxcmd(isp, &mbs, MBLOGALL); 976 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 977 return; 978 } 979 isp->isp_residx = mbs.param[5]; 980 981 mbs.param[0] = MBOX_INIT_REQ_QUEUE_A64; 982 mbs.param[1] = RQUEST_QUEUE_LEN(isp); 983 mbs.param[2] = DMA_WD1(isp->isp_rquest_dma); 984 mbs.param[3] = DMA_WD0(isp->isp_rquest_dma); 985 mbs.param[5] = 0; 986 mbs.param[6] = DMA_WD3(isp->isp_result_dma); 987 mbs.param[7] = DMA_WD2(isp->isp_result_dma); 988 isp_mboxcmd(isp, &mbs, MBLOGALL); 989 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 990 return; 991 } 992 isp->isp_reqidx = isp->isp_reqodx = mbs.param[4]; 993 } else { 994 mbs.param[0] = MBOX_INIT_RES_QUEUE; 995 mbs.param[1] = RESULT_QUEUE_LEN(isp); 996 mbs.param[2] = DMA_WD1(isp->isp_result_dma); 997 mbs.param[3] = DMA_WD0(isp->isp_result_dma); 998 mbs.param[4] = 0; 999 isp_mboxcmd(isp, &mbs, MBLOGALL); 1000 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1001 return; 1002 } 1003 isp->isp_residx = mbs.param[5]; 1004 1005 mbs.param[0] = MBOX_INIT_REQ_QUEUE; 1006 mbs.param[1] = RQUEST_QUEUE_LEN(isp); 1007 mbs.param[2] = DMA_WD1(isp->isp_rquest_dma); 1008 mbs.param[3] = DMA_WD0(isp->isp_rquest_dma); 1009 mbs.param[5] = 0; 1010 isp_mboxcmd(isp, &mbs, MBLOGALL); 1011 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1012 return; 1013 } 1014 isp->isp_reqidx = isp->isp_reqodx = mbs.param[4]; 1015 } 1016 1017 /* 1018 * Turn on Fast Posting, LVD transitions 1019 * 1020 * Ultra2 F/W always has had fast posting (and LVD transitions) 1021 * 1022 * Ultra and older (i.e., SBus) cards may not. It's just safer 1023 * to assume not for them. 1024 */ 1025 1026 mbs.param[0] = MBOX_SET_FW_FEATURES; 1027 mbs.param[1] = 0; 1028 if (IS_ULTRA2(isp)) 1029 mbs.param[1] |= FW_FEATURE_LVD_NOTIFY; 1030#ifndef ISP_NO_RIO 1031 if (IS_ULTRA2(isp) || IS_1240(isp)) 1032 mbs.param[1] |= FW_FEATURE_RIO_16BIT; 1033#else 1034#ifndef ISP_NO_FASTPOST 1035 if (IS_ULTRA2(isp) || IS_1240(isp)) 1036 mbs.param[1] |= FW_FEATURE_FAST_POST; 1037#endif 1038#endif 1039 if (mbs.param[1] != 0) { 1040 u_int16_t sfeat = mbs.param[1]; 1041 isp_mboxcmd(isp, &mbs, MBLOGALL); 1042 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 1043 isp_prt(isp, ISP_LOGINFO, 1044 "Enabled FW features (0x%x)", sfeat); 1045 } 1046 } 1047 1048 /* 1049 * Let the outer layers decide whether to issue a SCSI bus reset. 1050 */ 1051 isp->isp_state = ISP_INITSTATE; 1052} 1053 1054static void 1055isp_scsi_channel_init(struct ispsoftc *isp, int channel) 1056{ 1057 sdparam *sdp; 1058 mbreg_t mbs; 1059 int tgt; 1060 1061 sdp = isp->isp_param; 1062 sdp += channel; 1063 1064 /* 1065 * Set (possibly new) Initiator ID. 1066 */ 1067 MEMZERO(&mbs, sizeof (mbs)); 1068 mbs.param[0] = MBOX_SET_INIT_SCSI_ID; 1069 mbs.param[1] = (channel << 7) | sdp->isp_initiator_id; 1070 isp_mboxcmd(isp, &mbs, MBLOGALL); 1071 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1072 return; 1073 } 1074 isp_prt(isp, ISP_LOGINFO, "Initiator ID is %d on Channel %d", 1075 sdp->isp_initiator_id, channel); 1076 1077 1078 /* 1079 * Set current per-target parameters to an initial safe minimum. 1080 */ 1081 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 1082 int lun; 1083 u_int16_t sdf; 1084 1085 if (sdp->isp_devparam[tgt].dev_enable == 0) { 1086 continue; 1087 } 1088#ifndef ISP_TARGET_MODE 1089 sdf = sdp->isp_devparam[tgt].goal_flags; 1090 sdf &= DPARM_SAFE_DFLT; 1091 /* 1092 * It is not quite clear when this changed over so that 1093 * we could force narrow and async for 1000/1020 cards, 1094 * but assume that this is only the case for loaded 1095 * firmware. 1096 */ 1097 if (isp->isp_loaded_fw) { 1098 sdf |= DPARM_NARROW | DPARM_ASYNC; 1099 } 1100#else 1101 /* 1102 * The !$*!)$!$)* f/w uses the same index into some 1103 * internal table to decide how to respond to negotiations, 1104 * so if we've said "let's be safe" for ID X, and ID X 1105 * selects *us*, the negotiations will back to 'safe' 1106 * (as in narrow/async). What the f/w *should* do is 1107 * use the initiator id settings to decide how to respond. 1108 */ 1109 sdp->isp_devparam[tgt].goal_flags = sdf = DPARM_DEFAULT; 1110#endif 1111 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 1112 mbs.param[1] = (channel << 15) | (tgt << 8); 1113 mbs.param[2] = sdf; 1114 if ((sdf & DPARM_SYNC) == 0) { 1115 mbs.param[3] = 0; 1116 } else { 1117 mbs.param[3] = 1118 (sdp->isp_devparam[tgt].goal_offset << 8) | 1119 (sdp->isp_devparam[tgt].goal_period); 1120 } 1121 isp_prt(isp, ISP_LOGDEBUG0, 1122 "Initial Settings bus%d tgt%d flags 0x%x off 0x%x per 0x%x", 1123 channel, tgt, mbs.param[2], mbs.param[3] >> 8, 1124 mbs.param[3] & 0xff); 1125 isp_mboxcmd(isp, &mbs, MBLOGNONE); 1126 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1127 sdf = DPARM_SAFE_DFLT; 1128 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 1129 mbs.param[1] = (tgt << 8) | (channel << 15); 1130 mbs.param[2] = sdf; 1131 mbs.param[3] = 0; 1132 isp_mboxcmd(isp, &mbs, MBLOGALL); 1133 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1134 continue; 1135 } 1136 } 1137 1138 /* 1139 * We don't update any information directly from the f/w 1140 * because we need to run at least one command to cause a 1141 * new state to be latched up. So, we just assume that we 1142 * converge to the values we just had set. 1143 * 1144 * Ensure that we don't believe tagged queuing is enabled yet. 1145 * It turns out that sometimes the ISP just ignores our 1146 * attempts to set parameters for devices that it hasn't 1147 * seen yet. 1148 */ 1149 sdp->isp_devparam[tgt].actv_flags = sdf & ~DPARM_TQING; 1150 for (lun = 0; lun < (int) isp->isp_maxluns; lun++) { 1151 mbs.param[0] = MBOX_SET_DEV_QUEUE_PARAMS; 1152 mbs.param[1] = (channel << 15) | (tgt << 8) | lun; 1153 mbs.param[2] = sdp->isp_max_queue_depth; 1154 mbs.param[3] = sdp->isp_devparam[tgt].exc_throttle; 1155 isp_mboxcmd(isp, &mbs, MBLOGALL); 1156 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1157 break; 1158 } 1159 } 1160 } 1161 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 1162 if (sdp->isp_devparam[tgt].dev_refresh) { 1163 isp->isp_sendmarker |= (1 << channel); 1164 isp->isp_update |= (1 << channel); 1165 break; 1166 } 1167 } 1168} 1169 1170/* 1171 * Fibre Channel specific initialization. 1172 * 1173 * Locks are held before coming here. 1174 */ 1175static void 1176isp_fibre_init(struct ispsoftc *isp) 1177{ 1178 fcparam *fcp; 1179 isp_icb_t local, *icbp = &local; 1180 mbreg_t mbs; 1181 int loopid; 1182 u_int64_t nwwn, pwwn; 1183 1184 fcp = isp->isp_param; 1185 1186 /* 1187 * Do this *before* initializing the firmware. 1188 */ 1189 isp_mark_getpdb_all(isp); 1190 fcp->isp_fwstate = FW_CONFIG_WAIT; 1191 fcp->isp_loopstate = LOOP_NIL; 1192 1193 /* 1194 * If we have no role (neither target nor initiator), return. 1195 */ 1196 if (isp->isp_role == ISP_ROLE_NONE) { 1197 return; 1198 } 1199 1200 loopid = fcp->isp_loopid; 1201 MEMZERO(icbp, sizeof (*icbp)); 1202 icbp->icb_version = ICB_VERSION1; 1203 1204 /* 1205 * Firmware Options are either retrieved from NVRAM or 1206 * are patched elsewhere. We check them for sanity here 1207 * and make changes based on board revision, but otherwise 1208 * let others decide policy. 1209 */ 1210 1211 /* 1212 * If this is a 2100 < revision 5, we have to turn off FAIRNESS. 1213 */ 1214 if ((isp->isp_type == ISP_HA_FC_2100) && isp->isp_revision < 5) { 1215 fcp->isp_fwoptions &= ~ICBOPT_FAIRNESS; 1216 } 1217 1218 /* 1219 * We have to use FULL LOGIN even though it resets the loop too much 1220 * because otherwise port database entries don't get updated after 1221 * a LIP- this is a known f/w bug for 2100 f/w less than 1.17.0. 1222 */ 1223 if (!ISP_FW_NEWER_THAN(isp, 1, 17, 0)) { 1224 fcp->isp_fwoptions |= ICBOPT_FULL_LOGIN; 1225 } 1226 1227 /* 1228 * Insist on Port Database Update Async notifications 1229 */ 1230 fcp->isp_fwoptions |= ICBOPT_PDBCHANGE_AE; 1231 1232 /* 1233 * Make sure that target role reflects into fwoptions. 1234 */ 1235 if (isp->isp_role & ISP_ROLE_TARGET) { 1236 fcp->isp_fwoptions |= ICBOPT_TGT_ENABLE; 1237 } else { 1238 fcp->isp_fwoptions &= ~ICBOPT_TGT_ENABLE; 1239 } 1240 1241 if (isp->isp_role & ISP_ROLE_INITIATOR) { 1242 fcp->isp_fwoptions &= ~ICBOPT_INI_DISABLE; 1243 } else { 1244 fcp->isp_fwoptions |= ICBOPT_INI_DISABLE; 1245 } 1246 1247 /* 1248 * Propagate all of this into the ICB structure. 1249 */ 1250 icbp->icb_fwoptions = fcp->isp_fwoptions; 1251 icbp->icb_maxfrmlen = fcp->isp_maxfrmlen; 1252 if (icbp->icb_maxfrmlen < ICB_MIN_FRMLEN || 1253 icbp->icb_maxfrmlen > ICB_MAX_FRMLEN) { 1254 isp_prt(isp, ISP_LOGERR, 1255 "bad frame length (%d) from NVRAM- using %d", 1256 fcp->isp_maxfrmlen, ICB_DFLT_FRMLEN); 1257 icbp->icb_maxfrmlen = ICB_DFLT_FRMLEN; 1258 } 1259 icbp->icb_maxalloc = fcp->isp_maxalloc; 1260 if (icbp->icb_maxalloc < 1) { 1261 isp_prt(isp, ISP_LOGERR, 1262 "bad maximum allocation (%d)- using 16", fcp->isp_maxalloc); 1263 icbp->icb_maxalloc = 16; 1264 } 1265 icbp->icb_execthrottle = fcp->isp_execthrottle; 1266 if (icbp->icb_execthrottle < 1) { 1267 isp_prt(isp, ISP_LOGERR, 1268 "bad execution throttle of %d- using 16", 1269 fcp->isp_execthrottle); 1270 icbp->icb_execthrottle = ICB_DFLT_THROTTLE; 1271 } 1272 icbp->icb_retry_delay = fcp->isp_retry_delay; 1273 icbp->icb_retry_count = fcp->isp_retry_count; 1274 icbp->icb_hardaddr = loopid; 1275 if (icbp->icb_hardaddr >= 125) { 1276 /* 1277 * We end up with these Loop IDs for F-Port topologies 1278 */ 1279 if (icbp->icb_hardaddr != 0xff || icbp->icb_hardaddr != 0x800) { 1280 isp_prt(isp, ISP_LOGERR, 1281 "bad hard address %u- resetting to zero", 1282 icbp->icb_hardaddr); 1283 } 1284 icbp->icb_hardaddr = 0; 1285 } 1286 /* 1287 * Right now we just set extended options to prefer point-to-point 1288 * over loop based upon some soft config options. 1289 * 1290 * NB: for the 2300, ICBOPT_EXTENDED is required. 1291 */ 1292 if (IS_2200(isp) || IS_23XX(isp)) { 1293 icbp->icb_fwoptions |= ICBOPT_EXTENDED; 1294 /* 1295 * Prefer or force Point-To-Point instead Loop? 1296 */ 1297 switch(isp->isp_confopts & ISP_CFG_PORT_PREF) { 1298 case ISP_CFG_NPORT: 1299 icbp->icb_xfwoptions |= ICBXOPT_PTP_2_LOOP; 1300 break; 1301 case ISP_CFG_NPORT_ONLY: 1302 icbp->icb_xfwoptions |= ICBXOPT_PTP_ONLY; 1303 break; 1304 case ISP_CFG_LPORT_ONLY: 1305 icbp->icb_xfwoptions |= ICBXOPT_LOOP_ONLY; 1306 break; 1307 default: 1308 icbp->icb_xfwoptions |= ICBXOPT_LOOP_2_PTP; 1309 break; 1310 } 1311 if (IS_23XX(isp)) { 1312 /* 1313 * QLogic recommends that FAST Posting be turned 1314 * off for 23XX cards and instead allow the HBA 1315 * to write response queue entries and interrupt 1316 * after a delay (ZIO). 1317 * 1318 * If we set ZIO, it will disable fast posting, 1319 * so we don't need to clear it in fwoptions. 1320 * 1321 * Depending on the role we're selecting, we 1322 * chose fast posting or not as it still is 1323 * a win for target mode. 1324 */ 1325#ifndef ISP_NO_ZIO 1326 if (isp->isp_role == ISP_ROLE_TARGET) { 1327 icbp->icb_fwoptions |= ICBOPT_FAST_POST; 1328 } else { 1329 icbp->icb_xfwoptions |= ICBXOPT_ZIO; 1330 } 1331#else 1332 icbp->icb_fwoptions |= ICBOPT_FAST_POST; 1333#endif 1334#if 0 1335 /* 1336 * Values, in 100us increments. The default 1337 * is 2 (200us) if a value 0 (default) is 1338 * selected. 1339 */ 1340 icbp->icb_idelaytimer = 2; 1341#endif 1342 1343 if (isp->isp_confopts & ISP_CFG_ONEGB) { 1344 icbp->icb_zfwoptions |= ICBZOPT_RATE_ONEGB; 1345 } else if (isp->isp_confopts & ISP_CFG_TWOGB) { 1346 icbp->icb_zfwoptions |= ICBZOPT_RATE_TWOGB; 1347 } else { 1348 icbp->icb_zfwoptions |= ICBZOPT_RATE_AUTO; 1349 } 1350 } 1351 } 1352 1353#ifndef ISP_NO_RIO_FC 1354 /* 1355 * RIO seems to be enabled in 2100s for fw >= 1.17.0. 1356 * 1357 * I've had some questionable problems with RIO on 2200. 1358 * More specifically, on a 2204 I had problems with RIO 1359 * on a Linux system where I was dropping commands right 1360 * and left. It's not clear to me what the actual problem 1361 * was. 1362 * 1363 * 23XX Cards do not support RIO. Instead they support ZIO. 1364 */ 1365#if 0 1366 if (!IS_23XX(isp) && ISP_FW_NEWER_THAN(isp, 1, 17, 0)) { 1367 icbp->icb_xfwoptions |= ICBXOPT_RIO_16BIT; 1368 icbp->icb_racctimer = 4; 1369 icbp->icb_idelaytimer = 8; 1370 } 1371#endif 1372#endif 1373 1374 MEMZERO(&mbs, sizeof (mbs)); 1375 1376 /* 1377 * For 22XX > 2.1.26 && 23XX, set some options. 1378 * XXX: Probably okay for newer 2100 f/w too. 1379 */ 1380 if (ISP_FW_NEWER_THAN(isp, 2, 26, 0)) { 1381 /* 1382 * Turn on LIP F8 async event (1) 1383 * Turn on generate AE 8013 on all LIP Resets (2) 1384 * Disable LIP F7 switching (8) 1385 */ 1386 mbs.param[0] = MBOX_SET_FIRMWARE_OPTIONS; 1387 mbs.param[1] = 0xb; 1388 mbs.param[2] = 0; 1389 mbs.param[3] = 0; 1390 isp_mboxcmd(isp, &mbs, MBLOGALL); 1391 } 1392 icbp->icb_logintime = 30; /* 30 second login timeout */ 1393 1394 if (IS_23XX(isp)) { 1395 ISP_WRITE(isp, isp->isp_rqstinrp, 0); 1396 ISP_WRITE(isp, isp->isp_rqstoutrp, 0); 1397 ISP_WRITE(isp, isp->isp_respinrp, 0); 1398 ISP_WRITE(isp, isp->isp_respoutrp, 0); 1399 } 1400 1401 nwwn = ISP_NODEWWN(isp); 1402 pwwn = ISP_PORTWWN(isp); 1403 if (nwwn && pwwn) { 1404 icbp->icb_fwoptions |= ICBOPT_BOTH_WWNS; 1405 MAKE_NODE_NAME_FROM_WWN(icbp->icb_nodename, nwwn); 1406 MAKE_NODE_NAME_FROM_WWN(icbp->icb_portname, pwwn); 1407 isp_prt(isp, ISP_LOGDEBUG1, 1408 "Setting ICB Node 0x%08x%08x Port 0x%08x%08x", 1409 ((u_int32_t) (nwwn >> 32)), 1410 ((u_int32_t) (nwwn & 0xffffffff)), 1411 ((u_int32_t) (pwwn >> 32)), 1412 ((u_int32_t) (pwwn & 0xffffffff))); 1413 } else { 1414 isp_prt(isp, ISP_LOGDEBUG1, "Not using any WWNs"); 1415 icbp->icb_fwoptions &= ~(ICBOPT_BOTH_WWNS|ICBOPT_FULL_LOGIN); 1416 } 1417 icbp->icb_rqstqlen = RQUEST_QUEUE_LEN(isp); 1418 if (icbp->icb_rqstqlen < 1) { 1419 isp_prt(isp, ISP_LOGERR, "bad request queue length"); 1420 } 1421 icbp->icb_rsltqlen = RESULT_QUEUE_LEN(isp); 1422 if (icbp->icb_rsltqlen < 1) { 1423 isp_prt(isp, ISP_LOGERR, "bad result queue length"); 1424 } 1425 icbp->icb_rqstaddr[RQRSP_ADDR0015] = DMA_WD0(isp->isp_rquest_dma); 1426 icbp->icb_rqstaddr[RQRSP_ADDR1631] = DMA_WD1(isp->isp_rquest_dma); 1427 icbp->icb_rqstaddr[RQRSP_ADDR3247] = DMA_WD2(isp->isp_rquest_dma); 1428 icbp->icb_rqstaddr[RQRSP_ADDR4863] = DMA_WD3(isp->isp_rquest_dma); 1429 icbp->icb_respaddr[RQRSP_ADDR0015] = DMA_WD0(isp->isp_result_dma); 1430 icbp->icb_respaddr[RQRSP_ADDR1631] = DMA_WD1(isp->isp_result_dma); 1431 icbp->icb_respaddr[RQRSP_ADDR3247] = DMA_WD2(isp->isp_result_dma); 1432 icbp->icb_respaddr[RQRSP_ADDR4863] = DMA_WD3(isp->isp_result_dma); 1433 isp_prt(isp, ISP_LOGDEBUG0, 1434 "isp_fibre_init: fwopt 0x%x xfwopt 0x%x zfwopt 0x%x", 1435 icbp->icb_fwoptions, icbp->icb_xfwoptions, icbp->icb_zfwoptions); 1436 1437 FC_SCRATCH_ACQUIRE(isp); 1438 isp_put_icb(isp, icbp, (isp_icb_t *)fcp->isp_scratch); 1439 1440 /* 1441 * Init the firmware 1442 */ 1443 mbs.param[0] = MBOX_INIT_FIRMWARE; 1444 mbs.param[1] = 0; 1445 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 1446 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 1447 mbs.param[4] = 0; 1448 mbs.param[5] = 0; 1449 mbs.param[6] = DMA_WD3(fcp->isp_scdma); 1450 mbs.param[7] = DMA_WD2(fcp->isp_scdma); 1451 isp_mboxcmd(isp, &mbs, MBLOGALL); 1452 FC_SCRATCH_RELEASE(isp); 1453 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1454 return; 1455 } 1456 isp->isp_reqidx = isp->isp_reqodx = 0; 1457 isp->isp_residx = 0; 1458 isp->isp_sendmarker = 1; 1459 1460 /* 1461 * Whatever happens, we're now committed to being here. 1462 */ 1463 isp->isp_state = ISP_INITSTATE; 1464} 1465 1466/* 1467 * Fibre Channel Support- get the port database for the id. 1468 * 1469 * Locks are held before coming here. Return 0 if success, 1470 * else failure. 1471 */ 1472 1473static int 1474isp_getmap(struct ispsoftc *isp, fcpos_map_t *map) 1475{ 1476 fcparam *fcp = (fcparam *) isp->isp_param; 1477 mbreg_t mbs; 1478 1479 MEMZERO(&mbs, sizeof (mbs)); 1480 mbs.param[0] = MBOX_GET_FC_AL_POSITION_MAP; 1481 mbs.param[1] = 0; 1482 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 1483 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 1484 /* 1485 * Unneeded. For the 2100, except for initializing f/w, registers 1486 * 4/5 have to not be written to. 1487 * mbs.param[4] = 0; 1488 * mbs.param[5] = 0; 1489 * 1490 */ 1491 mbs.param[6] = 0; 1492 mbs.param[7] = 0; 1493 FC_SCRATCH_ACQUIRE(isp); 1494 isp_mboxcmd(isp, &mbs, MBLOGALL & ~MBOX_COMMAND_PARAM_ERROR); 1495 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 1496 MEMCPY(map, fcp->isp_scratch, sizeof (fcpos_map_t)); 1497 map->fwmap = mbs.param[1] != 0; 1498 FC_SCRATCH_RELEASE(isp); 1499 return (0); 1500 } 1501 FC_SCRATCH_RELEASE(isp); 1502 return (-1); 1503} 1504 1505static void 1506isp_mark_getpdb_all(struct ispsoftc *isp) 1507{ 1508 fcparam *fcp = (fcparam *) isp->isp_param; 1509 int i; 1510 for (i = 0; i < MAX_FC_TARG; i++) { 1511 fcp->portdb[i].valid = fcp->portdb[i].fabric_dev = 0; 1512 } 1513} 1514 1515static int 1516isp_getpdb(struct ispsoftc *isp, int id, isp_pdb_t *pdbp) 1517{ 1518 fcparam *fcp = (fcparam *) isp->isp_param; 1519 mbreg_t mbs; 1520 1521 MEMZERO(&mbs, sizeof (mbs)); 1522 mbs.param[0] = MBOX_GET_PORT_DB; 1523 if (IS_2KLOGIN(isp)) { 1524 mbs.param[1] = id; 1525 mbs.obits |= (1 << 10); 1526 } else { 1527 mbs.param[1] = id << 8; 1528 } 1529 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 1530 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 1531 /* 1532 * Unneeded. For the 2100, except for initializing f/w, registers 1533 * 4/5 have to not be written to. 1534 * mbs.param[4] = 0; 1535 * mbs.param[5] = 0; 1536 * 1537 */ 1538 mbs.param[6] = DMA_WD3(fcp->isp_scdma); 1539 mbs.param[7] = DMA_WD2(fcp->isp_scdma); 1540 FC_SCRATCH_ACQUIRE(isp); 1541 isp_mboxcmd(isp, &mbs, MBLOGALL & ~MBOX_COMMAND_PARAM_ERROR); 1542 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 1543 isp_get_pdb(isp, (isp_pdb_t *)fcp->isp_scratch, pdbp); 1544 FC_SCRATCH_RELEASE(isp); 1545 return (0); 1546 } 1547 FC_SCRATCH_RELEASE(isp); 1548 return (-1); 1549} 1550 1551static u_int64_t 1552isp_get_portname(struct ispsoftc *isp, int loopid, int nodename) 1553{ 1554 u_int64_t wwn = 0; 1555 mbreg_t mbs; 1556 1557 MEMZERO(&mbs, sizeof (mbs)); 1558 mbs.param[0] = MBOX_GET_PORT_NAME; 1559 if (IS_2KLOGIN(isp)) { 1560 mbs.param[1] = loopid; 1561 if (nodename) 1562 mbs.param[10] = 1; 1563 mbs.obits |= (1 << 10); 1564 } else { 1565 mbs.param[1] = loopid << 8; 1566 if (nodename) 1567 mbs.param[1] |= 1; 1568 } 1569 isp_mboxcmd(isp, &mbs, MBLOGALL & ~MBOX_COMMAND_PARAM_ERROR); 1570 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 1571 wwn = 1572 (((u_int64_t)(mbs.param[2] & 0xff)) << 56) | 1573 (((u_int64_t)(mbs.param[2] >> 8)) << 48) | 1574 (((u_int64_t)(mbs.param[3] & 0xff)) << 40) | 1575 (((u_int64_t)(mbs.param[3] >> 8)) << 32) | 1576 (((u_int64_t)(mbs.param[6] & 0xff)) << 24) | 1577 (((u_int64_t)(mbs.param[6] >> 8)) << 16) | 1578 (((u_int64_t)(mbs.param[7] & 0xff)) << 8) | 1579 (((u_int64_t)(mbs.param[7] >> 8))); 1580 } 1581 return (wwn); 1582} 1583 1584/* 1585 * Make sure we have good FC link and know our Loop ID. 1586 */ 1587 1588static int 1589isp_fclink_test(struct ispsoftc *isp, int usdelay) 1590{ 1591 static char *toponames[] = { 1592 "Private Loop", 1593 "FL Port", 1594 "N-Port to N-Port", 1595 "F Port", 1596 "F Port (no FLOGI_ACC response)" 1597 }; 1598 mbreg_t mbs; 1599 int count, check_for_fabric; 1600 u_int8_t lwfs; 1601 fcparam *fcp; 1602 struct lportdb *lp; 1603 isp_pdb_t pdb; 1604 1605 fcp = isp->isp_param; 1606 1607 /* 1608 * XXX: Here is where we would start a 'loop dead' timeout 1609 */ 1610 1611 /* 1612 * Wait up to N microseconds for F/W to go to a ready state. 1613 */ 1614 lwfs = FW_CONFIG_WAIT; 1615 count = 0; 1616 while (count < usdelay) { 1617 u_int64_t enano; 1618 u_int32_t wrk; 1619 NANOTIME_T hra, hrb; 1620 1621 GET_NANOTIME(&hra); 1622 isp_fw_state(isp); 1623 if (lwfs != fcp->isp_fwstate) { 1624 isp_prt(isp, ISP_LOGINFO, "Firmware State <%s->%s>", 1625 isp2100_fw_statename((int)lwfs), 1626 isp2100_fw_statename((int)fcp->isp_fwstate)); 1627 lwfs = fcp->isp_fwstate; 1628 } 1629 if (fcp->isp_fwstate == FW_READY) { 1630 break; 1631 } 1632 GET_NANOTIME(&hrb); 1633 1634 /* 1635 * Get the elapsed time in nanoseconds. 1636 * Always guaranteed to be non-zero. 1637 */ 1638 enano = NANOTIME_SUB(&hrb, &hra); 1639 1640 isp_prt(isp, ISP_LOGDEBUG1, 1641 "usec%d: 0x%lx->0x%lx enano 0x%x%08x", 1642 count, (long) GET_NANOSEC(&hra), (long) GET_NANOSEC(&hrb), 1643 (u_int32_t)(enano >> 32), (u_int32_t)(enano & 0xffffffff)); 1644 1645 /* 1646 * If the elapsed time is less than 1 millisecond, 1647 * delay a period of time up to that millisecond of 1648 * waiting. 1649 * 1650 * This peculiar code is an attempt to try and avoid 1651 * invoking u_int64_t math support functions for some 1652 * platforms where linkage is a problem. 1653 */ 1654 if (enano < (1000 * 1000)) { 1655 count += 1000; 1656 enano = (1000 * 1000) - enano; 1657 while (enano > (u_int64_t) 4000000000U) { 1658 USEC_SLEEP(isp, 4000000); 1659 enano -= (u_int64_t) 4000000000U; 1660 } 1661 wrk = enano; 1662 wrk /= 1000; 1663 USEC_SLEEP(isp, wrk); 1664 } else { 1665 while (enano > (u_int64_t) 4000000000U) { 1666 count += 4000000; 1667 enano -= (u_int64_t) 4000000000U; 1668 } 1669 wrk = enano; 1670 count += (wrk / 1000); 1671 } 1672 } 1673 1674 /* 1675 * If we haven't gone to 'ready' state, return. 1676 */ 1677 if (fcp->isp_fwstate != FW_READY) { 1678 return (-1); 1679 } 1680 1681 /* 1682 * Get our Loop ID (if possible). We really need to have it. 1683 */ 1684 MEMZERO(&mbs, sizeof (mbs)); 1685 mbs.param[0] = MBOX_GET_LOOP_ID; 1686 isp_mboxcmd(isp, &mbs, MBLOGALL); 1687 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1688 return (-1); 1689 } 1690 fcp->isp_loopid = mbs.param[1]; 1691 if (IS_2200(isp) || IS_23XX(isp)) { 1692 int topo = (int) mbs.param[6]; 1693 if (topo < TOPO_NL_PORT || topo > TOPO_PTP_STUB) 1694 topo = TOPO_PTP_STUB; 1695 fcp->isp_topo = topo; 1696 } else { 1697 fcp->isp_topo = TOPO_NL_PORT; 1698 } 1699 /* 1700 * XXX: We can get the AL_PA (low 8 bits) from here. 1701 * XXX: Where do we get the upper 16 bits? 1702 */ 1703 fcp->isp_portid = mbs.param[2] & 0xff; 1704 1705 /* 1706 * Check to see if we're on a fabric by trying to see if we 1707 * can talk to the fabric name server. This can be a bit 1708 * tricky because if we're a 2100, we should check always 1709 * (in case we're connected to a server doing aliasing). 1710 */ 1711 fcp->isp_onfabric = 0; 1712 1713 if (IS_2100(isp)) { 1714 /* 1715 * Don't bother with fabric if we are using really old 1716 * 2100 firmware. It's just not worth it. 1717 */ 1718 if (ISP_FW_NEWER_THAN(isp, 1, 15, 37)) { 1719 check_for_fabric = 1; 1720 } else { 1721 check_for_fabric = 0; 1722 } 1723 } else if (fcp->isp_topo == TOPO_FL_PORT || 1724 fcp->isp_topo == TOPO_F_PORT) { 1725 check_for_fabric = 1; 1726 } else 1727 check_for_fabric = 0; 1728 1729 if (check_for_fabric && isp_getpdb(isp, FL_PORT_ID, &pdb) == 0) { 1730 int loopid = FL_PORT_ID; 1731 if (IS_2100(isp)) { 1732 fcp->isp_topo = TOPO_FL_PORT; 1733 } 1734 1735 if (BITS2WORD(pdb.pdb_portid_bits) == 0) { 1736 /* 1737 * Crock. 1738 */ 1739 fcp->isp_topo = TOPO_NL_PORT; 1740 goto not_on_fabric; 1741 } 1742 fcp->isp_portid = mbs.param[2] | ((int) mbs.param[3] << 16); 1743 1744 /* 1745 * Save the Fabric controller's port database entry. 1746 */ 1747 lp = &fcp->portdb[loopid]; 1748 lp->node_wwn = 1749 (((u_int64_t)pdb.pdb_nodename[0]) << 56) | 1750 (((u_int64_t)pdb.pdb_nodename[1]) << 48) | 1751 (((u_int64_t)pdb.pdb_nodename[2]) << 40) | 1752 (((u_int64_t)pdb.pdb_nodename[3]) << 32) | 1753 (((u_int64_t)pdb.pdb_nodename[4]) << 24) | 1754 (((u_int64_t)pdb.pdb_nodename[5]) << 16) | 1755 (((u_int64_t)pdb.pdb_nodename[6]) << 8) | 1756 (((u_int64_t)pdb.pdb_nodename[7])); 1757 lp->port_wwn = 1758 (((u_int64_t)pdb.pdb_portname[0]) << 56) | 1759 (((u_int64_t)pdb.pdb_portname[1]) << 48) | 1760 (((u_int64_t)pdb.pdb_portname[2]) << 40) | 1761 (((u_int64_t)pdb.pdb_portname[3]) << 32) | 1762 (((u_int64_t)pdb.pdb_portname[4]) << 24) | 1763 (((u_int64_t)pdb.pdb_portname[5]) << 16) | 1764 (((u_int64_t)pdb.pdb_portname[6]) << 8) | 1765 (((u_int64_t)pdb.pdb_portname[7])); 1766 lp->roles = 1767 (pdb.pdb_prli_svc3 & SVC3_ROLE_MASK) >> SVC3_ROLE_SHIFT; 1768 lp->portid = BITS2WORD(pdb.pdb_portid_bits); 1769 lp->loopid = pdb.pdb_loopid; 1770 lp->loggedin = lp->valid = 1; 1771 fcp->isp_onfabric = 1; 1772 (void) isp_async(isp, ISPASYNC_PROMENADE, &loopid); 1773 isp_register_fc4_type(isp); 1774 } else { 1775not_on_fabric: 1776 fcp->isp_onfabric = 0; 1777 fcp->portdb[FL_PORT_ID].valid = 0; 1778 } 1779 1780 fcp->isp_gbspeed = 1; 1781 if (IS_23XX(isp)) { 1782 mbs.param[0] = MBOX_GET_SET_DATA_RATE; 1783 mbs.param[1] = MBGSD_GET_RATE; 1784 /* mbs.param[2] undefined if we're just getting rate */ 1785 isp_mboxcmd(isp, &mbs, MBLOGALL); 1786 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 1787 if (mbs.param[1] == MBGSD_TWOGB) { 1788 isp_prt(isp, ISP_LOGINFO, "2Gb link speed/s"); 1789 fcp->isp_gbspeed = 2; 1790 } 1791 } 1792 } 1793 1794 isp_prt(isp, ISP_LOGCONFIG, topology, fcp->isp_loopid, 1795 fcp->isp_portid, fcp->isp_loopstate, toponames[fcp->isp_topo]); 1796 1797 /* 1798 * Announce ourselves, too. This involves synthesizing an entry. 1799 */ 1800 if (fcp->isp_iid_set == 0) { 1801 fcp->isp_iid_set = 1; 1802 fcp->isp_iid = fcp->isp_loopid; 1803 lp = &fcp->portdb[fcp->isp_iid]; 1804 } else { 1805 lp = &fcp->portdb[fcp->isp_iid]; 1806 if (fcp->isp_portid != lp->portid || 1807 fcp->isp_loopid != lp->loopid || 1808 fcp->isp_nodewwn != ISP_NODEWWN(isp) || 1809 fcp->isp_portwwn != ISP_PORTWWN(isp)) { 1810 lp->valid = 0; 1811 count = fcp->isp_iid; 1812 (void) isp_async(isp, ISPASYNC_PROMENADE, &count); 1813 } 1814 } 1815 lp->loopid = fcp->isp_loopid; 1816 lp->portid = fcp->isp_portid; 1817 lp->node_wwn = ISP_NODEWWN(isp); 1818 lp->port_wwn = ISP_PORTWWN(isp); 1819 switch (isp->isp_role) { 1820 case ISP_ROLE_NONE: 1821 lp->roles = 0; 1822 break; 1823 case ISP_ROLE_TARGET: 1824 lp->roles = SVC3_TGT_ROLE >> SVC3_ROLE_SHIFT; 1825 break; 1826 case ISP_ROLE_INITIATOR: 1827 lp->roles = SVC3_INI_ROLE >> SVC3_ROLE_SHIFT; 1828 break; 1829 case ISP_ROLE_BOTH: 1830 lp->roles = (SVC3_INI_ROLE|SVC3_TGT_ROLE) >> SVC3_ROLE_SHIFT; 1831 break; 1832 } 1833 lp->loggedin = lp->valid = 1; 1834 count = fcp->isp_iid; 1835 (void) isp_async(isp, ISPASYNC_PROMENADE, &count); 1836 return (0); 1837} 1838 1839static char * 1840isp2100_fw_statename(int state) 1841{ 1842 switch(state) { 1843 case FW_CONFIG_WAIT: return "Config Wait"; 1844 case FW_WAIT_AL_PA: return "Waiting for AL_PA"; 1845 case FW_WAIT_LOGIN: return "Wait Login"; 1846 case FW_READY: return "Ready"; 1847 case FW_LOSS_OF_SYNC: return "Loss Of Sync"; 1848 case FW_ERROR: return "Error"; 1849 case FW_REINIT: return "Re-Init"; 1850 case FW_NON_PART: return "Nonparticipating"; 1851 default: return "?????"; 1852 } 1853} 1854 1855/* 1856 * Synchronize our soft copy of the port database with what the f/w thinks 1857 * (with a view toward possibly for a specific target....) 1858 */ 1859 1860static int 1861isp_pdb_sync(struct ispsoftc *isp) 1862{ 1863 struct lportdb *lp; 1864 fcparam *fcp = isp->isp_param; 1865 isp_pdb_t pdb; 1866 int loopid, base, lim; 1867 1868 /* 1869 * Make sure we're okay for doing this right now. 1870 */ 1871 if (fcp->isp_loopstate != LOOP_PDB_RCVD && 1872 fcp->isp_loopstate != LOOP_FSCAN_DONE && 1873 fcp->isp_loopstate != LOOP_LSCAN_DONE) { 1874 return (-1); 1875 } 1876 1877 if (fcp->isp_topo == TOPO_FL_PORT || fcp->isp_topo == TOPO_NL_PORT || 1878 fcp->isp_topo == TOPO_N_PORT) { 1879 if (fcp->isp_loopstate < LOOP_LSCAN_DONE) { 1880 if (isp_scan_loop(isp) != 0) { 1881 return (-1); 1882 } 1883 } 1884 } 1885 fcp->isp_loopstate = LOOP_SYNCING_PDB; 1886 1887 /* 1888 * If we get this far, we've settled our differences with the f/w 1889 * (for local loop device) and we can say that the loop state is ready. 1890 */ 1891 1892 if (fcp->isp_topo == TOPO_NL_PORT) { 1893 fcp->loop_seen_once = 1; 1894 fcp->isp_loopstate = LOOP_READY; 1895 return (0); 1896 } 1897 1898 /* 1899 * Find all Fabric Entities that didn't make it from one scan to the 1900 * next and let the world know they went away. Scan the whole database. 1901 */ 1902 for (lp = &fcp->portdb[0]; lp < &fcp->portdb[MAX_FC_TARG]; lp++) { 1903 if (lp->was_fabric_dev && lp->fabric_dev == 0) { 1904 loopid = lp - fcp->portdb; 1905 lp->valid = 0; /* should already be set */ 1906 (void) isp_async(isp, ISPASYNC_PROMENADE, &loopid); 1907 MEMZERO((void *) lp, sizeof (*lp)); 1908 continue; 1909 } 1910 lp->was_fabric_dev = lp->fabric_dev; 1911 } 1912 1913 if (fcp->isp_topo == TOPO_FL_PORT) 1914 base = FC_SNS_ID+1; 1915 else 1916 base = 0; 1917 1918 if (fcp->isp_topo == TOPO_N_PORT) 1919 lim = 1; 1920 else 1921 lim = MAX_FC_TARG; 1922 1923 /* 1924 * Now log in any fabric devices that the outer layer has 1925 * left for us to see. This seems the most sane policy 1926 * for the moment. 1927 */ 1928 for (lp = &fcp->portdb[base]; lp < &fcp->portdb[lim]; lp++) { 1929 u_int32_t portid; 1930 mbreg_t mbs; 1931 1932 loopid = lp - fcp->portdb; 1933 if (loopid >= FL_PORT_ID && loopid <= FC_SNS_ID) { 1934 continue; 1935 } 1936 1937 /* 1938 * Anything here? 1939 */ 1940 if (lp->port_wwn == 0) { 1941 continue; 1942 } 1943 1944 /* 1945 * Don't try to log into yourself. 1946 */ 1947 if ((portid = lp->portid) == fcp->isp_portid) { 1948 continue; 1949 } 1950 1951 1952 /* 1953 * If we'd been logged in- see if we still are and we haven't 1954 * changed. If so, no need to log ourselves out, etc.. 1955 * 1956 * Unfortunately, our charming Qlogic f/w has decided to 1957 * return a valid port database entry for a fabric device 1958 * that has, in fact, gone away. And it hangs trying to 1959 * log it out. 1960 */ 1961 if (lp->loggedin && lp->force_logout == 0 && 1962 isp_getpdb(isp, lp->loopid, &pdb) == 0) { 1963 int nrole; 1964 u_int64_t nwwnn, nwwpn; 1965 nwwnn = 1966 (((u_int64_t)pdb.pdb_nodename[0]) << 56) | 1967 (((u_int64_t)pdb.pdb_nodename[1]) << 48) | 1968 (((u_int64_t)pdb.pdb_nodename[2]) << 40) | 1969 (((u_int64_t)pdb.pdb_nodename[3]) << 32) | 1970 (((u_int64_t)pdb.pdb_nodename[4]) << 24) | 1971 (((u_int64_t)pdb.pdb_nodename[5]) << 16) | 1972 (((u_int64_t)pdb.pdb_nodename[6]) << 8) | 1973 (((u_int64_t)pdb.pdb_nodename[7])); 1974 nwwpn = 1975 (((u_int64_t)pdb.pdb_portname[0]) << 56) | 1976 (((u_int64_t)pdb.pdb_portname[1]) << 48) | 1977 (((u_int64_t)pdb.pdb_portname[2]) << 40) | 1978 (((u_int64_t)pdb.pdb_portname[3]) << 32) | 1979 (((u_int64_t)pdb.pdb_portname[4]) << 24) | 1980 (((u_int64_t)pdb.pdb_portname[5]) << 16) | 1981 (((u_int64_t)pdb.pdb_portname[6]) << 8) | 1982 (((u_int64_t)pdb.pdb_portname[7])); 1983 nrole = (pdb.pdb_prli_svc3 & SVC3_ROLE_MASK) >> 1984 SVC3_ROLE_SHIFT; 1985 if (pdb.pdb_loopid == lp->loopid && lp->portid == 1986 (u_int32_t) BITS2WORD(pdb.pdb_portid_bits) && 1987 nwwnn == lp->node_wwn && nwwpn == lp->port_wwn && 1988 lp->roles == nrole && lp->force_logout == 0) { 1989 lp->loggedin = lp->valid = 1; 1990 isp_prt(isp, ISP_LOGCONFIG, lretained, 1991 (int) (lp - fcp->portdb), 1992 (int) lp->loopid, lp->portid); 1993 continue; 1994 } 1995 } 1996 1997 if (fcp->isp_fwstate != FW_READY || 1998 fcp->isp_loopstate != LOOP_SYNCING_PDB) { 1999 return (-1); 2000 } 2001 2002 /* 2003 * Force a logout if we were logged in. 2004 */ 2005 if (lp->loggedin) { 2006 if (lp->force_logout || 2007 isp_getpdb(isp, lp->loopid, &pdb) == 0) { 2008 MEMZERO(&mbs, sizeof (mbs)); 2009 mbs.param[0] = MBOX_FABRIC_LOGOUT; 2010 if (IS_2KLOGIN(isp)) { 2011 mbs.param[1] = lp->loopid; 2012 mbs.obits |= (1 << 10); 2013 } else { 2014 mbs.param[1] = lp->loopid << 8; 2015 } 2016 mbs.param[2] = 0; 2017 mbs.param[3] = 0; 2018 isp_mboxcmd(isp, &mbs, MBLOGNONE); 2019 isp_prt(isp, ISP_LOGINFO, plogout, 2020 (int) (lp - fcp->portdb), lp->loopid, 2021 lp->portid); 2022 } 2023 lp->force_logout = lp->loggedin = 0; 2024 if (fcp->isp_fwstate != FW_READY || 2025 fcp->isp_loopstate != LOOP_SYNCING_PDB) { 2026 return (-1); 2027 } 2028 } 2029 2030 /* 2031 * And log in.... 2032 */ 2033 loopid = lp - fcp->portdb; 2034 lp->loopid = FL_PORT_ID; 2035 do { 2036 MEMZERO(&mbs, sizeof (mbs)); 2037 mbs.param[0] = MBOX_FABRIC_LOGIN; 2038 if (IS_2KLOGIN(isp)) { 2039 mbs.param[1] = loopid; 2040 mbs.obits |= (1 << 10); 2041 } else { 2042 mbs.param[1] = loopid << 8; 2043 } 2044 mbs.param[2] = portid >> 16; 2045 mbs.param[3] = portid & 0xffff; 2046 isp_mboxcmd(isp, &mbs, MBLOGALL & ~(MBOX_LOOP_ID_USED | 2047 MBOX_PORT_ID_USED | MBOX_COMMAND_ERROR)); 2048 if (fcp->isp_fwstate != FW_READY || 2049 fcp->isp_loopstate != LOOP_SYNCING_PDB) { 2050 return (-1); 2051 } 2052 switch (mbs.param[0]) { 2053 case MBOX_LOOP_ID_USED: 2054 /* 2055 * Try the next available loop id. 2056 */ 2057 loopid++; 2058 break; 2059 case MBOX_PORT_ID_USED: 2060 /* 2061 * This port is already logged in. 2062 * Snaffle the loop id it's using if it's 2063 * nonzero, otherwise we're hosed. 2064 */ 2065 if (mbs.param[1] != 0) { 2066 loopid = mbs.param[1]; 2067 isp_prt(isp, ISP_LOGINFO, retained, 2068 loopid, (int) (lp - fcp->portdb), 2069 lp->portid); 2070 } else { 2071 loopid = MAX_FC_TARG; 2072 break; 2073 } 2074 /* FALLTHROUGH */ 2075 case MBOX_COMMAND_COMPLETE: 2076 lp->loggedin = 1; 2077 lp->loopid = loopid; 2078 break; 2079 case MBOX_COMMAND_ERROR: 2080 isp_prt(isp, ISP_LOGINFO, plogierr, 2081 portid, mbs.param[1]); 2082 /* FALLTHROUGH */ 2083 case MBOX_ALL_IDS_USED: /* We're outta IDs */ 2084 default: 2085 loopid = MAX_FC_TARG; 2086 break; 2087 } 2088 } while (lp->loopid == FL_PORT_ID && loopid < MAX_FC_TARG); 2089 2090 /* 2091 * If we get here and we haven't set a Loop ID, 2092 * we failed to log into this device. 2093 */ 2094 2095 if (lp->loopid == FL_PORT_ID) { 2096 lp->loopid = 0; 2097 continue; 2098 } 2099 2100 /* 2101 * Make sure we can get the approriate port information. 2102 */ 2103 if (isp_getpdb(isp, lp->loopid, &pdb) != 0) { 2104 isp_prt(isp, ISP_LOGWARN, nopdb, lp->portid); 2105 goto dump_em; 2106 } 2107 2108 if (fcp->isp_fwstate != FW_READY || 2109 fcp->isp_loopstate != LOOP_SYNCING_PDB) { 2110 return (-1); 2111 } 2112 2113 if (pdb.pdb_loopid != lp->loopid) { 2114 isp_prt(isp, ISP_LOGWARN, pdbmfail1, 2115 lp->portid, pdb.pdb_loopid); 2116 goto dump_em; 2117 } 2118 2119 if (lp->portid != (u_int32_t) BITS2WORD(pdb.pdb_portid_bits)) { 2120 isp_prt(isp, ISP_LOGWARN, pdbmfail2, 2121 lp->portid, BITS2WORD(pdb.pdb_portid_bits)); 2122 goto dump_em; 2123 } 2124 2125 lp->roles = 2126 (pdb.pdb_prli_svc3 & SVC3_ROLE_MASK) >> SVC3_ROLE_SHIFT; 2127 lp->node_wwn = 2128 (((u_int64_t)pdb.pdb_nodename[0]) << 56) | 2129 (((u_int64_t)pdb.pdb_nodename[1]) << 48) | 2130 (((u_int64_t)pdb.pdb_nodename[2]) << 40) | 2131 (((u_int64_t)pdb.pdb_nodename[3]) << 32) | 2132 (((u_int64_t)pdb.pdb_nodename[4]) << 24) | 2133 (((u_int64_t)pdb.pdb_nodename[5]) << 16) | 2134 (((u_int64_t)pdb.pdb_nodename[6]) << 8) | 2135 (((u_int64_t)pdb.pdb_nodename[7])); 2136 lp->port_wwn = 2137 (((u_int64_t)pdb.pdb_portname[0]) << 56) | 2138 (((u_int64_t)pdb.pdb_portname[1]) << 48) | 2139 (((u_int64_t)pdb.pdb_portname[2]) << 40) | 2140 (((u_int64_t)pdb.pdb_portname[3]) << 32) | 2141 (((u_int64_t)pdb.pdb_portname[4]) << 24) | 2142 (((u_int64_t)pdb.pdb_portname[5]) << 16) | 2143 (((u_int64_t)pdb.pdb_portname[6]) << 8) | 2144 (((u_int64_t)pdb.pdb_portname[7])); 2145 /* 2146 * Check to make sure this all makes sense. 2147 */ 2148 if (lp->node_wwn && lp->port_wwn) { 2149 lp->valid = 1; 2150 loopid = lp - fcp->portdb; 2151 (void) isp_async(isp, ISPASYNC_PROMENADE, &loopid); 2152 continue; 2153 } 2154dump_em: 2155 lp->valid = 0; 2156 isp_prt(isp, ISP_LOGINFO, 2157 ldumped, loopid, lp->loopid, lp->portid); 2158 MEMZERO(&mbs, sizeof (mbs)); 2159 mbs.param[0] = MBOX_FABRIC_LOGOUT; 2160 if (IS_2KLOGIN(isp)) { 2161 mbs.param[1] = lp->loopid; 2162 mbs.obits |= (1 << 10); 2163 } else { 2164 mbs.param[1] = lp->loopid << 8; 2165 } 2166 isp_mboxcmd(isp, &mbs, MBLOGNONE); 2167 if (fcp->isp_fwstate != FW_READY || 2168 fcp->isp_loopstate != LOOP_SYNCING_PDB) { 2169 return (-1); 2170 } 2171 } 2172 /* 2173 * If we get here, we've for sure seen not only a valid loop 2174 * but know what is or isn't on it, so mark this for usage 2175 * in isp_start. 2176 */ 2177 fcp->loop_seen_once = 1; 2178 fcp->isp_loopstate = LOOP_READY; 2179 return (0); 2180} 2181 2182static int 2183isp_scan_loop(struct ispsoftc *isp) 2184{ 2185 struct lportdb *lp; 2186 fcparam *fcp = isp->isp_param; 2187 isp_pdb_t pdb; 2188 int loopid, lim, hival; 2189 2190 switch (fcp->isp_topo) { 2191 case TOPO_NL_PORT: 2192 hival = FL_PORT_ID; 2193 break; 2194 case TOPO_N_PORT: 2195 hival = 2; 2196 break; 2197 case TOPO_FL_PORT: 2198 hival = FC_PORT_ID; 2199 break; 2200 default: 2201 fcp->isp_loopstate = LOOP_LSCAN_DONE; 2202 return (0); 2203 } 2204 fcp->isp_loopstate = LOOP_SCANNING_LOOP; 2205 2206 /* 2207 * make sure the temp port database is clean... 2208 */ 2209 MEMZERO((void *)fcp->tport, sizeof (fcp->tport)); 2210 2211 /* 2212 * Run through the local loop ports and get port database info 2213 * for each loop ID. 2214 * 2215 * There's a somewhat unexplained situation where the f/w passes back 2216 * the wrong database entity- if that happens, just restart (up to 2217 * FL_PORT_ID times). 2218 */ 2219 for (lim = loopid = 0; loopid < hival; loopid++) { 2220 lp = &fcp->tport[loopid]; 2221 2222 /* 2223 * Don't even try for ourselves... 2224 */ 2225 if (loopid == fcp->isp_loopid) 2226 continue; 2227 2228 lp->node_wwn = isp_get_portname(isp, loopid, 1); 2229 if (fcp->isp_loopstate < LOOP_SCANNING_LOOP) 2230 return (-1); 2231 if (lp->node_wwn == 0) 2232 continue; 2233 lp->port_wwn = isp_get_portname(isp, loopid, 0); 2234 if (fcp->isp_loopstate < LOOP_SCANNING_LOOP) 2235 return (-1); 2236 if (lp->port_wwn == 0) { 2237 lp->node_wwn = 0; 2238 continue; 2239 } 2240 2241 /* 2242 * Get an entry.... 2243 */ 2244 if (isp_getpdb(isp, loopid, &pdb) != 0) { 2245 if (fcp->isp_loopstate < LOOP_SCANNING_LOOP) 2246 return (-1); 2247 continue; 2248 } 2249 if (fcp->isp_loopstate < LOOP_SCANNING_LOOP) { 2250 return (-1); 2251 } 2252 2253 /* 2254 * If the returned database element doesn't match what we 2255 * asked for, restart the process entirely (up to a point...). 2256 */ 2257 if (pdb.pdb_loopid != loopid) { 2258 loopid = 0; 2259 if (lim++ < hival) { 2260 continue; 2261 } 2262 isp_prt(isp, ISP_LOGWARN, 2263 "giving up on synchronizing the port database"); 2264 return (-1); 2265 } 2266 2267 /* 2268 * Save the pertinent info locally. 2269 */ 2270 lp->node_wwn = 2271 (((u_int64_t)pdb.pdb_nodename[0]) << 56) | 2272 (((u_int64_t)pdb.pdb_nodename[1]) << 48) | 2273 (((u_int64_t)pdb.pdb_nodename[2]) << 40) | 2274 (((u_int64_t)pdb.pdb_nodename[3]) << 32) | 2275 (((u_int64_t)pdb.pdb_nodename[4]) << 24) | 2276 (((u_int64_t)pdb.pdb_nodename[5]) << 16) | 2277 (((u_int64_t)pdb.pdb_nodename[6]) << 8) | 2278 (((u_int64_t)pdb.pdb_nodename[7])); 2279 lp->port_wwn = 2280 (((u_int64_t)pdb.pdb_portname[0]) << 56) | 2281 (((u_int64_t)pdb.pdb_portname[1]) << 48) | 2282 (((u_int64_t)pdb.pdb_portname[2]) << 40) | 2283 (((u_int64_t)pdb.pdb_portname[3]) << 32) | 2284 (((u_int64_t)pdb.pdb_portname[4]) << 24) | 2285 (((u_int64_t)pdb.pdb_portname[5]) << 16) | 2286 (((u_int64_t)pdb.pdb_portname[6]) << 8) | 2287 (((u_int64_t)pdb.pdb_portname[7])); 2288 lp->roles = 2289 (pdb.pdb_prli_svc3 & SVC3_ROLE_MASK) >> SVC3_ROLE_SHIFT; 2290 lp->portid = BITS2WORD(pdb.pdb_portid_bits); 2291 lp->loopid = pdb.pdb_loopid; 2292 } 2293 2294 /* 2295 * Mark all of the permanent local loop database entries as invalid 2296 * (except our own entry). 2297 */ 2298 for (loopid = 0; loopid < hival; loopid++) { 2299 if (loopid == fcp->isp_iid) { 2300 fcp->portdb[loopid].valid = 1; 2301 fcp->portdb[loopid].loopid = fcp->isp_loopid; 2302 continue; 2303 } 2304 fcp->portdb[loopid].valid = 0; 2305 } 2306 2307 /* 2308 * Now merge our local copy of the port database into our saved copy. 2309 * Notify the outer layers of new devices arriving. 2310 */ 2311 for (loopid = 0; loopid < hival; loopid++) { 2312 int i; 2313 2314 /* 2315 * If we don't have a non-zero Port WWN, we're not here. 2316 */ 2317 if (fcp->tport[loopid].port_wwn == 0) { 2318 continue; 2319 } 2320 2321 /* 2322 * Skip ourselves. 2323 */ 2324 if (loopid == fcp->isp_iid) { 2325 continue; 2326 } 2327 2328 /* 2329 * For the purposes of deciding whether this is the 2330 * 'same' device or not, we only search for an identical 2331 * Port WWN. Node WWNs may or may not be the same as 2332 * the Port WWN, and there may be multiple different 2333 * Port WWNs with the same Node WWN. It would be chaos 2334 * to have multiple identical Port WWNs, so we don't 2335 * allow that. 2336 */ 2337 2338 for (i = 0; i < hival; i++) { 2339 int j; 2340 if (fcp->portdb[i].port_wwn == 0) 2341 continue; 2342 if (fcp->portdb[i].port_wwn != 2343 fcp->tport[loopid].port_wwn) 2344 continue; 2345 /* 2346 * We found this WWN elsewhere- it's changed 2347 * loopids then. We don't change it's actual 2348 * position in our cached port database- we 2349 * just change the actual loop ID we'd use. 2350 */ 2351 if (fcp->portdb[i].loopid != loopid) { 2352 isp_prt(isp, ISP_LOGINFO, portshift, i, 2353 fcp->portdb[i].loopid, 2354 fcp->portdb[i].portid, loopid, 2355 fcp->tport[loopid].portid); 2356 } 2357 fcp->portdb[i].portid = fcp->tport[loopid].portid; 2358 fcp->portdb[i].loopid = loopid; 2359 fcp->portdb[i].valid = 1; 2360 fcp->portdb[i].roles = fcp->tport[loopid].roles; 2361 2362 /* 2363 * Now make sure this Port WWN doesn't exist elsewhere 2364 * in the port database. 2365 */ 2366 for (j = i+1; j < hival; j++) { 2367 if (fcp->portdb[i].port_wwn != 2368 fcp->portdb[j].port_wwn) { 2369 continue; 2370 } 2371 isp_prt(isp, ISP_LOGWARN, portdup, j, i); 2372 /* 2373 * Invalidate the 'old' *and* 'new' ones. 2374 * This is really harsh and not quite right, 2375 * but if this happens, we really don't know 2376 * who is what at this point. 2377 */ 2378 fcp->portdb[i].valid = 0; 2379 fcp->portdb[j].valid = 0; 2380 } 2381 break; 2382 } 2383 2384 /* 2385 * If we didn't traverse the entire port database, 2386 * then we found (and remapped) an existing entry. 2387 * No need to notify anyone- go for the next one. 2388 */ 2389 if (i < hival) { 2390 isp_prt(isp, ISP_LOGINFO, retained, 2391 fcp->portdb[i].loopid, i, fcp->portdb[i].portid); 2392 continue; 2393 } 2394 2395 /* 2396 * We've not found this Port WWN anywhere. It's a new entry. 2397 * See if we can leave it where it is (with target == loopid). 2398 */ 2399 if (fcp->portdb[loopid].port_wwn != 0) { 2400 for (lim = 0; lim < hival; lim++) { 2401 if (fcp->portdb[lim].port_wwn == 0) 2402 break; 2403 } 2404 /* "Cannot Happen" */ 2405 if (lim == hival) { 2406 isp_prt(isp, ISP_LOGWARN, "Remap Overflow"); 2407 continue; 2408 } 2409 i = lim; 2410 } else { 2411 i = loopid; 2412 } 2413 2414 /* 2415 * NB: The actual loopid we use here is loopid- we may 2416 * in fact be at a completely different index (target). 2417 */ 2418 fcp->portdb[i].loopid = loopid; 2419 fcp->portdb[i].port_wwn = fcp->tport[loopid].port_wwn; 2420 fcp->portdb[i].node_wwn = fcp->tport[loopid].node_wwn; 2421 fcp->portdb[i].roles = fcp->tport[loopid].roles; 2422 fcp->portdb[i].portid = fcp->tport[loopid].portid; 2423 fcp->portdb[i].valid = 1; 2424 2425 /* 2426 * Tell the outside world we've arrived. 2427 */ 2428 (void) isp_async(isp, ISPASYNC_PROMENADE, &i); 2429 } 2430 2431 /* 2432 * Now find all previously used targets that are now invalid and 2433 * notify the outer layers that they're gone. 2434 */ 2435 for (lp = &fcp->portdb[0]; lp < &fcp->portdb[hival]; lp++) { 2436 if (lp->valid || lp->port_wwn == 0) { 2437 continue; 2438 } 2439 2440 /* 2441 * Tell the outside world we've gone 2442 * away and erase our pdb entry. 2443 * 2444 */ 2445 loopid = lp - fcp->portdb; 2446 (void) isp_async(isp, ISPASYNC_PROMENADE, &loopid); 2447 MEMZERO((void *) lp, sizeof (*lp)); 2448 } 2449 fcp->isp_loopstate = LOOP_LSCAN_DONE; 2450 return (0); 2451} 2452 2453 2454static int 2455isp_fabric_mbox_cmd(struct ispsoftc *isp, mbreg_t *mbp) 2456{ 2457 isp_mboxcmd(isp, mbp, MBLOGNONE); 2458 if (mbp->param[0] != MBOX_COMMAND_COMPLETE) { 2459 if (FCPARAM(isp)->isp_loopstate == LOOP_SCANNING_FABRIC) { 2460 FCPARAM(isp)->isp_loopstate = LOOP_PDB_RCVD; 2461 } 2462 if (mbp->param[0] == MBOX_COMMAND_ERROR) { 2463 char tbuf[16]; 2464 char *m; 2465 switch (mbp->param[1]) { 2466 case 1: 2467 m = "No Loop"; 2468 break; 2469 case 2: 2470 m = "Failed to allocate IOCB buffer"; 2471 break; 2472 case 3: 2473 m = "Failed to allocate XCB buffer"; 2474 break; 2475 case 4: 2476 m = "timeout or transmit failed"; 2477 break; 2478 case 5: 2479 m = "no fabric loop"; 2480 break; 2481 case 6: 2482 m = "remote device not a target"; 2483 break; 2484 default: 2485 SNPRINTF(tbuf, sizeof tbuf, "%x", 2486 mbp->param[1]); 2487 m = tbuf; 2488 break; 2489 } 2490 isp_prt(isp, ISP_LOGERR, "SNS Failed- %s", m); 2491 } 2492 return (-1); 2493 } 2494 2495 if (FCPARAM(isp)->isp_fwstate != FW_READY || 2496 FCPARAM(isp)->isp_loopstate < LOOP_SCANNING_FABRIC) { 2497 return (-1); 2498 } 2499 return(0); 2500} 2501 2502#ifdef ISP_USE_GA_NXT 2503static int 2504isp_scan_fabric(struct ispsoftc *isp, int ftype) 2505{ 2506 fcparam *fcp = isp->isp_param; 2507 u_int32_t portid, first_portid, last_portid; 2508 int hicap, last_port_same; 2509 2510 if (fcp->isp_onfabric == 0) { 2511 fcp->isp_loopstate = LOOP_FSCAN_DONE; 2512 return (0); 2513 } 2514 2515 FC_SCRATCH_ACQUIRE(isp); 2516 2517 /* 2518 * Since Port IDs are 24 bits, we can check against having seen 2519 * anything yet with this value. 2520 */ 2521 last_port_same = 0; 2522 last_portid = 0xffffffff; /* not a port */ 2523 first_portid = portid = fcp->isp_portid; 2524 fcp->isp_loopstate = LOOP_SCANNING_FABRIC; 2525 2526 for (hicap = 0; hicap < GA_NXT_MAX; hicap++) { 2527 mbreg_t mbs; 2528 sns_screq_t *rq; 2529 sns_ga_nxt_rsp_t *rs0, *rs1; 2530 struct lportdb lcl; 2531 u_int8_t sc[SNS_GA_NXT_RESP_SIZE]; 2532 2533 rq = (sns_screq_t *)sc; 2534 MEMZERO((void *) rq, SNS_GA_NXT_REQ_SIZE); 2535 rq->snscb_rblen = SNS_GA_NXT_RESP_SIZE >> 1; 2536 rq->snscb_addr[RQRSP_ADDR0015] = DMA_WD0(fcp->isp_scdma+0x100); 2537 rq->snscb_addr[RQRSP_ADDR1631] = DMA_WD1(fcp->isp_scdma+0x100); 2538 rq->snscb_addr[RQRSP_ADDR3247] = DMA_WD2(fcp->isp_scdma+0x100); 2539 rq->snscb_addr[RQRSP_ADDR4863] = DMA_WD3(fcp->isp_scdma+0x100); 2540 rq->snscb_sblen = 6; 2541 rq->snscb_data[0] = SNS_GA_NXT; 2542 rq->snscb_data[4] = portid & 0xffff; 2543 rq->snscb_data[5] = (portid >> 16) & 0xff; 2544 isp_put_sns_request(isp, rq, (sns_screq_t *) fcp->isp_scratch); 2545 MEMORYBARRIER(isp, SYNC_SFORDEV, 0, SNS_GA_NXT_REQ_SIZE); 2546 MEMZERO(&mbs, sizeof (mbs)); 2547 mbs.param[0] = MBOX_SEND_SNS; 2548 mbs.param[1] = SNS_GA_NXT_REQ_SIZE >> 1; 2549 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 2550 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 2551 /* 2552 * Leave 4 and 5 alone 2553 */ 2554 mbs.param[6] = DMA_WD3(fcp->isp_scdma); 2555 mbs.param[7] = DMA_WD2(fcp->isp_scdma); 2556 if (isp_fabric_mbox_cmd(isp, &mbs)) { 2557 if (fcp->isp_loopstate >= LOOP_SCANNING_FABRIC) { 2558 fcp->isp_loopstate = LOOP_PDB_RCVD; 2559 } 2560 FC_SCRATCH_RELEASE(isp); 2561 return (-1); 2562 } 2563 MEMORYBARRIER(isp, SYNC_SFORCPU, 0x100, SNS_GA_NXT_RESP_SIZE); 2564 rs1 = (sns_ga_nxt_rsp_t *) sc; 2565 rs0 = (sns_ga_nxt_rsp_t *) ((u_int8_t *)fcp->isp_scratch+0x100); 2566 isp_get_ga_nxt_response(isp, rs0, rs1); 2567 if (rs1->snscb_cthdr.ct_response != FS_ACC) { 2568 int level; 2569 if (rs1->snscb_cthdr.ct_reason == 9 && 2570 rs1->snscb_cthdr.ct_explanation == 7) 2571 level = ISP_LOGDEBUG0; 2572 else 2573 level = ISP_LOGWARN; 2574 isp_prt(isp, level, swrej, "GA_NXT", 2575 rs1->snscb_cthdr.ct_reason, 2576 rs1->snscb_cthdr.ct_explanation, portid); 2577 FC_SCRATCH_RELEASE(isp); 2578 fcp->isp_loopstate = LOOP_FSCAN_DONE; 2579 return (0); 2580 } 2581 portid = 2582 (((u_int32_t) rs1->snscb_port_id[0]) << 16) | 2583 (((u_int32_t) rs1->snscb_port_id[1]) << 8) | 2584 (((u_int32_t) rs1->snscb_port_id[2])); 2585 2586 /* 2587 * XXX: We should check to make sure that this entry 2588 * XXX: supports the type(s) we are interested in. 2589 */ 2590 /* 2591 * Okay, we now have information about a fabric object. 2592 * If it is the type we're interested in, tell the outer layers 2593 * about it. The outer layer needs to know: Port ID, WWNN, 2594 * WWPN, FC4 type, and port type. 2595 * 2596 * The lportdb structure is adequate for this. 2597 */ 2598 MEMZERO(&lcl, sizeof (lcl)); 2599 lcl.port_type = rs1->snscb_port_type; 2600 lcl.fc4_type = ftype; 2601 lcl.portid = portid; 2602 lcl.node_wwn = 2603 (((u_int64_t)rs1->snscb_nodename[0]) << 56) | 2604 (((u_int64_t)rs1->snscb_nodename[1]) << 48) | 2605 (((u_int64_t)rs1->snscb_nodename[2]) << 40) | 2606 (((u_int64_t)rs1->snscb_nodename[3]) << 32) | 2607 (((u_int64_t)rs1->snscb_nodename[4]) << 24) | 2608 (((u_int64_t)rs1->snscb_nodename[5]) << 16) | 2609 (((u_int64_t)rs1->snscb_nodename[6]) << 8) | 2610 (((u_int64_t)rs1->snscb_nodename[7])); 2611 lcl.port_wwn = 2612 (((u_int64_t)rs1->snscb_portname[0]) << 56) | 2613 (((u_int64_t)rs1->snscb_portname[1]) << 48) | 2614 (((u_int64_t)rs1->snscb_portname[2]) << 40) | 2615 (((u_int64_t)rs1->snscb_portname[3]) << 32) | 2616 (((u_int64_t)rs1->snscb_portname[4]) << 24) | 2617 (((u_int64_t)rs1->snscb_portname[5]) << 16) | 2618 (((u_int64_t)rs1->snscb_portname[6]) << 8) | 2619 (((u_int64_t)rs1->snscb_portname[7])); 2620 2621 /* 2622 * Does this fabric object support the type we want? 2623 * If not, skip it. 2624 */ 2625 if (rs1->snscb_fc4_types[ftype >> 5] & (1 << (ftype & 0x1f))) { 2626 if (first_portid == portid) { 2627 lcl.last_fabric_dev = 1; 2628 } else { 2629 lcl.last_fabric_dev = 0; 2630 } 2631 (void) isp_async(isp, ISPASYNC_FABRIC_DEV, &lcl); 2632 } else { 2633 isp_prt(isp, ISP_LOGDEBUG0, 2634 "PortID 0x%x doesn't support FC4 type 0x%x", 2635 portid, ftype); 2636 } 2637 if (first_portid == portid) { 2638 fcp->isp_loopstate = LOOP_FSCAN_DONE; 2639 FC_SCRATCH_RELEASE(isp); 2640 return (0); 2641 } 2642 if (portid == last_portid) { 2643 if (last_port_same++ > 20) { 2644 isp_prt(isp, ISP_LOGWARN, 2645 "tangled fabric database detected"); 2646 break; 2647 } 2648 } else { 2649 last_port_same = 0 ; 2650 last_portid = portid; 2651 } 2652 } 2653 FC_SCRATCH_RELEASE(isp); 2654 if (hicap >= GA_NXT_MAX) { 2655 isp_prt(isp, ISP_LOGWARN, "fabric too big (> %d)", GA_NXT_MAX); 2656 } 2657 fcp->isp_loopstate = LOOP_FSCAN_DONE; 2658 return (0); 2659} 2660#else 2661#define GIDLEN ((ISP2100_SCRLEN >> 1) + 16) 2662#define NGENT ((GIDLEN - 16) >> 2) 2663 2664#define IGPOFF (ISP2100_SCRLEN - GIDLEN) 2665#define GXOFF (256) 2666 2667static int 2668isp_scan_fabric(struct ispsoftc *isp, int ftype) 2669{ 2670 fcparam *fcp = FCPARAM(isp); 2671 mbreg_t mbs; 2672 int i; 2673 sns_gid_ft_req_t *rq; 2674 sns_gid_ft_rsp_t *rs0, *rs1; 2675 2676 if (fcp->isp_onfabric == 0) { 2677 fcp->isp_loopstate = LOOP_FSCAN_DONE; 2678 return (0); 2679 } 2680 2681 FC_SCRATCH_ACQUIRE(isp); 2682 fcp->isp_loopstate = LOOP_SCANNING_FABRIC; 2683 2684 rq = (sns_gid_ft_req_t *)fcp->tport; 2685 MEMZERO((void *) rq, SNS_GID_FT_REQ_SIZE); 2686 rq->snscb_rblen = GIDLEN >> 1; 2687 rq->snscb_addr[RQRSP_ADDR0015] = DMA_WD0(fcp->isp_scdma+IGPOFF); 2688 rq->snscb_addr[RQRSP_ADDR1631] = DMA_WD1(fcp->isp_scdma+IGPOFF); 2689 rq->snscb_addr[RQRSP_ADDR3247] = DMA_WD2(fcp->isp_scdma+IGPOFF); 2690 rq->snscb_addr[RQRSP_ADDR4863] = DMA_WD3(fcp->isp_scdma+IGPOFF); 2691 rq->snscb_sblen = 6; 2692 rq->snscb_cmd = SNS_GID_FT; 2693 rq->snscb_mword_div_2 = NGENT; 2694 rq->snscb_fc4_type = ftype; 2695 isp_put_gid_ft_request(isp, rq, (sns_gid_ft_req_t *) fcp->isp_scratch); 2696 MEMORYBARRIER(isp, SYNC_SFORDEV, 0, SNS_GID_FT_REQ_SIZE); 2697 MEMZERO(&mbs, sizeof (mbs)); 2698 mbs.param[0] = MBOX_SEND_SNS; 2699 mbs.param[1] = SNS_GID_FT_REQ_SIZE >> 1; 2700 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 2701 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 2702 2703 /* 2704 * Leave 4 and 5 alone 2705 */ 2706 mbs.param[6] = DMA_WD3(fcp->isp_scdma); 2707 mbs.param[7] = DMA_WD2(fcp->isp_scdma); 2708 if (isp_fabric_mbox_cmd(isp, &mbs)) { 2709 if (fcp->isp_loopstate >= LOOP_SCANNING_FABRIC) { 2710 fcp->isp_loopstate = LOOP_PDB_RCVD; 2711 } 2712 FC_SCRATCH_RELEASE(isp); 2713 return (-1); 2714 } 2715 if (fcp->isp_loopstate != LOOP_SCANNING_FABRIC) { 2716 FC_SCRATCH_RELEASE(isp); 2717 return (-1); 2718 } 2719 MEMORYBARRIER(isp, SYNC_SFORCPU, IGPOFF, GIDLEN); 2720 rs1 = (sns_gid_ft_rsp_t *) fcp->tport; 2721 rs0 = (sns_gid_ft_rsp_t *) ((u_int8_t *)fcp->isp_scratch+IGPOFF); 2722 isp_get_gid_ft_response(isp, rs0, rs1, NGENT); 2723 if (rs1->snscb_cthdr.ct_response != FS_ACC) { 2724 int level; 2725 if (rs1->snscb_cthdr.ct_reason == 9 && 2726 rs1->snscb_cthdr.ct_explanation == 7) 2727 level = ISP_LOGDEBUG0; 2728 else 2729 level = ISP_LOGWARN; 2730 isp_prt(isp, level, swrej, "GID_FT", 2731 rs1->snscb_cthdr.ct_reason, 2732 rs1->snscb_cthdr.ct_explanation, 0); 2733 FC_SCRATCH_RELEASE(isp); 2734 fcp->isp_loopstate = LOOP_FSCAN_DONE; 2735 return (0); 2736 } 2737 2738 /* 2739 * Okay, we now have a list of Port IDs for this class of device. 2740 * Go through the list and for each one get the WWPN/WWNN for it 2741 * and tell the outer layers about it. The outer layer needs to 2742 * know: Port ID, WWNN, WWPN, FC4 type, and (possibly) port type. 2743 * 2744 * The lportdb structure is adequate for this. 2745 */ 2746 i = -1; 2747 do { 2748 sns_gxn_id_req_t grqbuf, *gq = &grqbuf; 2749 sns_gxn_id_rsp_t *gs0, grsbuf, *gs1 = &grsbuf; 2750 struct lportdb lcl; 2751#if 0 2752 sns_gff_id_rsp_t *fs0, ffsbuf, *fs1 = &ffsbuf; 2753#endif 2754 2755 i++; 2756 MEMZERO(&lcl, sizeof (lcl)); 2757 lcl.fc4_type = ftype; 2758 lcl.portid = 2759 (((u_int32_t) rs1->snscb_ports[i].portid[0]) << 16) | 2760 (((u_int32_t) rs1->snscb_ports[i].portid[1]) << 8) | 2761 (((u_int32_t) rs1->snscb_ports[i].portid[2])); 2762 2763 MEMZERO((void *) gq, sizeof (sns_gxn_id_req_t)); 2764 gq->snscb_rblen = SNS_GXN_ID_RESP_SIZE >> 1; 2765 gq->snscb_addr[RQRSP_ADDR0015] = DMA_WD0(fcp->isp_scdma+GXOFF); 2766 gq->snscb_addr[RQRSP_ADDR1631] = DMA_WD1(fcp->isp_scdma+GXOFF); 2767 gq->snscb_addr[RQRSP_ADDR3247] = DMA_WD2(fcp->isp_scdma+GXOFF); 2768 gq->snscb_addr[RQRSP_ADDR4863] = DMA_WD3(fcp->isp_scdma+GXOFF); 2769 gq->snscb_sblen = 6; 2770 gq->snscb_cmd = SNS_GPN_ID; 2771 gq->snscb_portid = lcl.portid; 2772 isp_put_gxn_id_request(isp, gq, 2773 (sns_gxn_id_req_t *) fcp->isp_scratch); 2774 MEMORYBARRIER(isp, SYNC_SFORDEV, 0, SNS_GXN_ID_REQ_SIZE); 2775 MEMZERO(&mbs, sizeof (mbs)); 2776 mbs.param[0] = MBOX_SEND_SNS; 2777 mbs.param[1] = SNS_GXN_ID_REQ_SIZE >> 1; 2778 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 2779 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 2780 /* 2781 * Leave 4 and 5 alone 2782 */ 2783 mbs.param[6] = DMA_WD3(fcp->isp_scdma); 2784 mbs.param[7] = DMA_WD2(fcp->isp_scdma); 2785 if (isp_fabric_mbox_cmd(isp, &mbs)) { 2786 if (fcp->isp_loopstate >= LOOP_SCANNING_FABRIC) { 2787 fcp->isp_loopstate = LOOP_PDB_RCVD; 2788 } 2789 FC_SCRATCH_RELEASE(isp); 2790 return (-1); 2791 } 2792 if (fcp->isp_loopstate != LOOP_SCANNING_FABRIC) { 2793 FC_SCRATCH_RELEASE(isp); 2794 return (-1); 2795 } 2796 MEMORYBARRIER(isp, SYNC_SFORCPU, GXOFF, SNS_GXN_ID_RESP_SIZE); 2797 gs0 = (sns_gxn_id_rsp_t *) ((u_int8_t *)fcp->isp_scratch+GXOFF); 2798 isp_get_gxn_id_response(isp, gs0, gs1); 2799 if (gs1->snscb_cthdr.ct_response != FS_ACC) { 2800 isp_prt(isp, ISP_LOGWARN, swrej, "GPN_ID", 2801 gs1->snscb_cthdr.ct_reason, 2802 gs1->snscb_cthdr.ct_explanation, lcl.portid); 2803 if (fcp->isp_loopstate != LOOP_SCANNING_FABRIC) { 2804 FC_SCRATCH_RELEASE(isp); 2805 return (-1); 2806 } 2807 continue; 2808 } 2809 lcl.port_wwn = 2810 (((u_int64_t)gs1->snscb_wwn[0]) << 56) | 2811 (((u_int64_t)gs1->snscb_wwn[1]) << 48) | 2812 (((u_int64_t)gs1->snscb_wwn[2]) << 40) | 2813 (((u_int64_t)gs1->snscb_wwn[3]) << 32) | 2814 (((u_int64_t)gs1->snscb_wwn[4]) << 24) | 2815 (((u_int64_t)gs1->snscb_wwn[5]) << 16) | 2816 (((u_int64_t)gs1->snscb_wwn[6]) << 8) | 2817 (((u_int64_t)gs1->snscb_wwn[7])); 2818 2819 MEMZERO((void *) gq, sizeof (sns_gxn_id_req_t)); 2820 gq->snscb_rblen = SNS_GXN_ID_RESP_SIZE >> 1; 2821 gq->snscb_addr[RQRSP_ADDR0015] = DMA_WD0(fcp->isp_scdma+GXOFF); 2822 gq->snscb_addr[RQRSP_ADDR1631] = DMA_WD1(fcp->isp_scdma+GXOFF); 2823 gq->snscb_addr[RQRSP_ADDR3247] = DMA_WD2(fcp->isp_scdma+GXOFF); 2824 gq->snscb_addr[RQRSP_ADDR4863] = DMA_WD3(fcp->isp_scdma+GXOFF); 2825 gq->snscb_sblen = 6; 2826 gq->snscb_cmd = SNS_GNN_ID; 2827 gq->snscb_portid = lcl.portid; 2828 isp_put_gxn_id_request(isp, gq, 2829 (sns_gxn_id_req_t *) fcp->isp_scratch); 2830 MEMORYBARRIER(isp, SYNC_SFORDEV, 0, SNS_GXN_ID_REQ_SIZE); 2831 MEMZERO(&mbs, sizeof (mbs)); 2832 mbs.param[0] = MBOX_SEND_SNS; 2833 mbs.param[1] = SNS_GXN_ID_REQ_SIZE >> 1; 2834 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 2835 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 2836 /* 2837 * Leave 4 and 5 alone 2838 */ 2839 mbs.param[6] = DMA_WD3(fcp->isp_scdma); 2840 mbs.param[7] = DMA_WD2(fcp->isp_scdma); 2841 if (isp_fabric_mbox_cmd(isp, &mbs)) { 2842 if (fcp->isp_loopstate >= LOOP_SCANNING_FABRIC) { 2843 fcp->isp_loopstate = LOOP_PDB_RCVD; 2844 } 2845 FC_SCRATCH_RELEASE(isp); 2846 return (-1); 2847 } 2848 if (fcp->isp_loopstate != LOOP_SCANNING_FABRIC) { 2849 FC_SCRATCH_RELEASE(isp); 2850 return (-1); 2851 } 2852 MEMORYBARRIER(isp, SYNC_SFORCPU, GXOFF, SNS_GXN_ID_RESP_SIZE); 2853 gs0 = (sns_gxn_id_rsp_t *) ((u_int8_t *)fcp->isp_scratch+GXOFF); 2854 isp_get_gxn_id_response(isp, gs0, gs1); 2855 if (gs1->snscb_cthdr.ct_response != FS_ACC) { 2856 isp_prt(isp, ISP_LOGWARN, swrej, "GNN_ID", 2857 gs1->snscb_cthdr.ct_reason, 2858 gs1->snscb_cthdr.ct_explanation, lcl.portid); 2859 if (fcp->isp_loopstate != LOOP_SCANNING_FABRIC) { 2860 FC_SCRATCH_RELEASE(isp); 2861 return (-1); 2862 } 2863 continue; 2864 } 2865 lcl.node_wwn = 2866 (((u_int64_t)gs1->snscb_wwn[0]) << 56) | 2867 (((u_int64_t)gs1->snscb_wwn[1]) << 48) | 2868 (((u_int64_t)gs1->snscb_wwn[2]) << 40) | 2869 (((u_int64_t)gs1->snscb_wwn[3]) << 32) | 2870 (((u_int64_t)gs1->snscb_wwn[4]) << 24) | 2871 (((u_int64_t)gs1->snscb_wwn[5]) << 16) | 2872 (((u_int64_t)gs1->snscb_wwn[6]) << 8) | 2873 (((u_int64_t)gs1->snscb_wwn[7])); 2874 2875 /* 2876 * The QLogic f/w is bouncing this with a parameter error. 2877 */ 2878#if 0 2879 /* 2880 * Try and get FC4 Features (FC-GS-3 only). 2881 * We can use the sns_gxn_id_req_t for this request. 2882 */ 2883 MEMZERO((void *) gq, sizeof (sns_gxn_id_req_t)); 2884 gq->snscb_rblen = SNS_GFF_ID_RESP_SIZE >> 1; 2885 gq->snscb_addr[RQRSP_ADDR0015] = DMA_WD0(fcp->isp_scdma+GXOFF); 2886 gq->snscb_addr[RQRSP_ADDR1631] = DMA_WD1(fcp->isp_scdma+GXOFF); 2887 gq->snscb_addr[RQRSP_ADDR3247] = DMA_WD2(fcp->isp_scdma+GXOFF); 2888 gq->snscb_addr[RQRSP_ADDR4863] = DMA_WD3(fcp->isp_scdma+GXOFF); 2889 gq->snscb_sblen = 6; 2890 gq->snscb_cmd = SNS_GFF_ID; 2891 gq->snscb_portid = lcl.portid; 2892 isp_put_gxn_id_request(isp, gq, 2893 (sns_gxn_id_req_t *) fcp->isp_scratch); 2894 MEMORYBARRIER(isp, SYNC_SFORDEV, 0, SNS_GXN_ID_REQ_SIZE); 2895 MEMZERO(&mbs, sizeof (mbs)); 2896 mbs.param[0] = MBOX_SEND_SNS; 2897 mbs.param[1] = SNS_GXN_ID_REQ_SIZE >> 1; 2898 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 2899 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 2900 /* 2901 * Leave 4 and 5 alone 2902 */ 2903 mbs.param[6] = DMA_WD3(fcp->isp_scdma); 2904 mbs.param[7] = DMA_WD2(fcp->isp_scdma); 2905 if (isp_fabric_mbox_cmd(isp, &mbs)) { 2906 if (fcp->isp_loopstate >= LOOP_SCANNING_FABRIC) { 2907 fcp->isp_loopstate = LOOP_PDB_RCVD; 2908 } 2909 FC_SCRATCH_RELEASE(isp); 2910 return (-1); 2911 } 2912 if (fcp->isp_loopstate != LOOP_SCANNING_FABRIC) { 2913 FC_SCRATCH_RELEASE(isp); 2914 return (-1); 2915 } 2916 MEMORYBARRIER(isp, SYNC_SFORCPU, GXOFF, SNS_GFF_ID_RESP_SIZE); 2917 fs0 = (sns_gff_id_rsp_t *) ((u_int8_t *)fcp->isp_scratch+GXOFF); 2918 isp_get_gff_id_response(isp, fs0, fs1); 2919 if (fs1->snscb_cthdr.ct_response != FS_ACC) { 2920 isp_prt(isp, /* ISP_LOGDEBUG0 */ ISP_LOGWARN, 2921 swrej, "GFF_ID", 2922 fs1->snscb_cthdr.ct_reason, 2923 fs1->snscb_cthdr.ct_explanation, lcl.portid); 2924 if (fcp->isp_loopstate != LOOP_SCANNING_FABRIC) { 2925 FC_SCRATCH_RELEASE(isp); 2926 return (-1); 2927 } 2928 } else { 2929 int index = (ftype >> 3); 2930 int bshft = (ftype & 0x7) * 4; 2931 int fc4_fval = 2932 (fs1->snscb_fc4_features[index] >> bshft) & 0xf; 2933 if (fc4_fval & 0x1) { 2934 lcl.roles |= 2935 (SVC3_INI_ROLE >> SVC3_ROLE_SHIFT); 2936 } 2937 if (fc4_fval & 0x2) { 2938 lcl.roles |= 2939 (SVC3_TGT_ROLE >> SVC3_ROLE_SHIFT); 2940 } 2941 } 2942#endif 2943 2944 /* 2945 * If we really want to know what kind of port type this is, 2946 * we have to run another CT command. Otherwise, we'll leave 2947 * it as undefined. 2948 * 2949 lcl.port_type = 0; 2950 */ 2951 if (rs1->snscb_ports[i].control & 0x80) { 2952 lcl.last_fabric_dev = 1; 2953 } else { 2954 lcl.last_fabric_dev = 0; 2955 } 2956 (void) isp_async(isp, ISPASYNC_FABRIC_DEV, &lcl); 2957 2958 } while ((rs1->snscb_ports[i].control & 0x80) == 0 && i < NGENT-1); 2959 2960 /* 2961 * If we're not at the last entry, our list isn't big enough. 2962 */ 2963 if ((rs1->snscb_ports[i].control & 0x80) == 0) { 2964 isp_prt(isp, ISP_LOGWARN, "fabric too big for scratch area"); 2965 } 2966 2967 FC_SCRATCH_RELEASE(isp); 2968 fcp->isp_loopstate = LOOP_FSCAN_DONE; 2969 return (0); 2970} 2971#endif 2972 2973static void 2974isp_register_fc4_type(struct ispsoftc *isp) 2975{ 2976 fcparam *fcp = isp->isp_param; 2977 u_int8_t local[SNS_RFT_ID_REQ_SIZE]; 2978 sns_screq_t *reqp = (sns_screq_t *) local; 2979 mbreg_t mbs; 2980 2981 MEMZERO((void *) reqp, SNS_RFT_ID_REQ_SIZE); 2982 reqp->snscb_rblen = SNS_RFT_ID_RESP_SIZE >> 1; 2983 reqp->snscb_addr[RQRSP_ADDR0015] = DMA_WD0(fcp->isp_scdma + 0x100); 2984 reqp->snscb_addr[RQRSP_ADDR1631] = DMA_WD1(fcp->isp_scdma + 0x100); 2985 reqp->snscb_addr[RQRSP_ADDR3247] = DMA_WD2(fcp->isp_scdma + 0x100); 2986 reqp->snscb_addr[RQRSP_ADDR4863] = DMA_WD3(fcp->isp_scdma + 0x100); 2987 reqp->snscb_sblen = 22; 2988 reqp->snscb_data[0] = SNS_RFT_ID; 2989 reqp->snscb_data[4] = fcp->isp_portid & 0xffff; 2990 reqp->snscb_data[5] = (fcp->isp_portid >> 16) & 0xff; 2991 reqp->snscb_data[6] = (1 << FC4_SCSI); 2992#if 0 2993 reqp->snscb_data[6] |= (1 << FC4_IP); /* ISO/IEC 8802-2 LLC/SNAP */ 2994#endif 2995 FC_SCRATCH_ACQUIRE(isp); 2996 isp_put_sns_request(isp, reqp, (sns_screq_t *) fcp->isp_scratch); 2997 MEMZERO(&mbs, sizeof (mbs)); 2998 mbs.param[0] = MBOX_SEND_SNS; 2999 mbs.param[1] = SNS_RFT_ID_REQ_SIZE >> 1; 3000 mbs.param[2] = DMA_WD1(fcp->isp_scdma); 3001 mbs.param[3] = DMA_WD0(fcp->isp_scdma); 3002 /* 3003 * Leave 4 and 5 alone 3004 */ 3005 mbs.param[6] = DMA_WD3(fcp->isp_scdma); 3006 mbs.param[7] = DMA_WD2(fcp->isp_scdma); 3007 isp_mboxcmd(isp, &mbs, MBLOGALL); 3008 FC_SCRATCH_RELEASE(isp); 3009 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 3010 isp_prt(isp, ISP_LOGDEBUG0, "Register FC4 types succeeded"); 3011 } 3012} 3013 3014/* 3015 * Start a command. Locking is assumed done in the caller. 3016 */ 3017 3018int 3019isp_start(XS_T *xs) 3020{ 3021 struct ispsoftc *isp; 3022 u_int16_t nxti, optr, handle; 3023 u_int8_t local[QENTRY_LEN]; 3024 ispreq_t *reqp, *qep; 3025 int target, i; 3026 3027 XS_INITERR(xs); 3028 isp = XS_ISP(xs); 3029 3030 /* 3031 * Check to make sure we're supporting initiator role. 3032 */ 3033 if ((isp->isp_role & ISP_ROLE_INITIATOR) == 0) { 3034 XS_SETERR(xs, HBA_SELTIMEOUT); 3035 return (CMD_COMPLETE); 3036 } 3037 3038 /* 3039 * Now make sure we're running. 3040 */ 3041 3042 if (isp->isp_state != ISP_RUNSTATE) { 3043 isp_prt(isp, ISP_LOGERR, "Adapter not at RUNSTATE"); 3044 XS_SETERR(xs, HBA_BOTCH); 3045 return (CMD_COMPLETE); 3046 } 3047 3048 /* 3049 * Check command CDB length, etc.. We really are limited to 16 bytes 3050 * for Fibre Channel, but can do up to 44 bytes in parallel SCSI, 3051 * but probably only if we're running fairly new firmware (we'll 3052 * let the old f/w choke on an extended command queue entry). 3053 */ 3054 3055 if (XS_CDBLEN(xs) > (IS_FC(isp)? 16 : 44) || XS_CDBLEN(xs) == 0) { 3056 isp_prt(isp, ISP_LOGERR, 3057 "unsupported cdb length (%d, CDB[0]=0x%x)", 3058 XS_CDBLEN(xs), XS_CDBP(xs)[0] & 0xff); 3059 XS_SETERR(xs, HBA_BOTCH); 3060 return (CMD_COMPLETE); 3061 } 3062 3063 /* 3064 * Check to see whether we have good firmware state still or 3065 * need to refresh our port database for this target. 3066 */ 3067 target = XS_TGT(xs); 3068 if (IS_FC(isp)) { 3069 fcparam *fcp = isp->isp_param; 3070 struct lportdb *lp; 3071#ifdef HANDLE_LOOPSTATE_IN_OUTER_LAYERS 3072 if (fcp->isp_fwstate != FW_READY || 3073 fcp->isp_loopstate != LOOP_READY) { 3074 return (CMD_RQLATER); 3075 } 3076 3077 /* 3078 * If we're not on a Fabric, we can't have a target 3079 * above FL_PORT_ID-1. 3080 * 3081 * If we're on a fabric and *not* connected as an F-port, 3082 * we can't have a target less than FC_SNS_ID+1. This 3083 * keeps us from having to sort out the difference between 3084 * local public loop devices and those which we might get 3085 * from a switch's database. 3086 */ 3087 if (fcp->isp_onfabric == 0) { 3088 if (target >= FL_PORT_ID) { 3089 XS_SETERR(xs, HBA_SELTIMEOUT); 3090 return (CMD_COMPLETE); 3091 } 3092 } else { 3093 if (target >= FL_PORT_ID && target <= FC_SNS_ID) { 3094 XS_SETERR(xs, HBA_SELTIMEOUT); 3095 return (CMD_COMPLETE); 3096 } 3097 /* 3098 * We used to exclude having local loop ports 3099 * at the same time that we have fabric ports. 3100 * That is, we used to exclude having ports 3101 * at < FL_PORT_ID if we're FL-port. 3102 * 3103 * That's wrong. The only thing that could be 3104 * dicey is if the switch you're connected to 3105 * has these local loop ports appear on the 3106 * fabric and we somehow attach them twice. 3107 */ 3108 } 3109#else 3110 /* 3111 * Check for f/w being in ready state. If the f/w 3112 * isn't in ready state, then we don't know our 3113 * loop ID and the f/w hasn't completed logging 3114 * into all targets on the loop. If this is the 3115 * case, then bounce the command. We pretend this is 3116 * a SELECTION TIMEOUT error if we've never gone to 3117 * FW_READY state at all- in this case we may not 3118 * be hooked to a loop at all and we shouldn't hang 3119 * the machine for this. Otherwise, defer this command 3120 * until later. 3121 */ 3122 if (fcp->isp_fwstate != FW_READY) { 3123 /* 3124 * Give ourselves at most a 250ms delay. 3125 */ 3126 if (isp_fclink_test(isp, 250000)) { 3127 XS_SETERR(xs, HBA_SELTIMEOUT); 3128 if (fcp->loop_seen_once) { 3129 return (CMD_RQLATER); 3130 } else { 3131 return (CMD_COMPLETE); 3132 } 3133 } 3134 } 3135 3136 /* 3137 * If we're not on a Fabric, we can't have a target 3138 * above FL_PORT_ID-1. 3139 * 3140 * If we're on a fabric and *not* connected as an F-port, 3141 * we can't have a target less than FC_SNS_ID+1. This 3142 * keeps us from having to sort out the difference between 3143 * local public loop devices and those which we might get 3144 * from a switch's database. 3145 */ 3146 if (fcp->isp_onfabric == 0) { 3147 if (target >= FL_PORT_ID) { 3148 XS_SETERR(xs, HBA_SELTIMEOUT); 3149 return (CMD_COMPLETE); 3150 } 3151 } else { 3152 if (target >= FL_PORT_ID && target <= FC_SNS_ID) { 3153 XS_SETERR(xs, HBA_SELTIMEOUT); 3154 return (CMD_COMPLETE); 3155 } 3156 if (fcp->isp_topo != TOPO_F_PORT && 3157 target < FL_PORT_ID) { 3158 XS_SETERR(xs, HBA_SELTIMEOUT); 3159 return (CMD_COMPLETE); 3160 } 3161 } 3162 3163 /* 3164 * If our loop state is such that we haven't yet received 3165 * a "Port Database Changed" notification (after a LIP or 3166 * a Loop Reset or firmware initialization), then defer 3167 * sending commands for a little while, but only if we've 3168 * seen a valid loop at one point (otherwise we can get 3169 * stuck at initialization time). 3170 */ 3171 if (fcp->isp_loopstate < LOOP_PDB_RCVD) { 3172 XS_SETERR(xs, HBA_SELTIMEOUT); 3173 if (fcp->loop_seen_once) { 3174 return (CMD_RQLATER); 3175 } else { 3176 return (CMD_COMPLETE); 3177 } 3178 } 3179 3180 /* 3181 * If we're in the middle of loop or fabric scanning 3182 * or merging the port databases, retry this command later. 3183 */ 3184 if (fcp->isp_loopstate == LOOP_SCANNING_FABRIC || 3185 fcp->isp_loopstate == LOOP_SCANNING_LOOP || 3186 fcp->isp_loopstate == LOOP_SYNCING_PDB) { 3187 return (CMD_RQLATER); 3188 } 3189 3190 /* 3191 * If our loop state is now such that we've just now 3192 * received a Port Database Change notification, then 3193 * we have to go off and (re)scan the fabric. We back 3194 * out and try again later if this doesn't work. 3195 */ 3196 if (fcp->isp_loopstate == LOOP_PDB_RCVD && fcp->isp_onfabric) { 3197 if (isp_scan_fabric(isp, FC4_SCSI)) { 3198 return (CMD_RQLATER); 3199 } 3200 if (fcp->isp_fwstate != FW_READY || 3201 fcp->isp_loopstate < LOOP_FSCAN_DONE) { 3202 return (CMD_RQLATER); 3203 } 3204 } 3205 3206 /* 3207 * If our loop state is now such that we've just now 3208 * received a Port Database Change notification, then 3209 * we have to go off and (re)synchronize our port 3210 * database. 3211 */ 3212 if (fcp->isp_loopstate < LOOP_READY) { 3213 if (isp_pdb_sync(isp)) { 3214 return (CMD_RQLATER); 3215 } 3216 if (fcp->isp_fwstate != FW_READY || 3217 fcp->isp_loopstate != LOOP_READY) { 3218 return (CMD_RQLATER); 3219 } 3220 } 3221 3222 /* 3223 * XXX: Here's were we would cancel any loop_dead flag 3224 * XXX: also cancel in dead_loop timeout that's running 3225 */ 3226#endif 3227 3228 /* 3229 * Now check whether we should even think about pursuing this. 3230 */ 3231 lp = &fcp->portdb[target]; 3232 if (lp->valid == 0) { 3233 XS_SETERR(xs, HBA_SELTIMEOUT); 3234 return (CMD_COMPLETE); 3235 } 3236 if ((lp->roles & (SVC3_TGT_ROLE >> SVC3_ROLE_SHIFT)) == 0) { 3237 isp_prt(isp, ISP_LOGDEBUG2, 3238 "Target %d does not have target service", target); 3239 XS_SETERR(xs, HBA_SELTIMEOUT); 3240 return (CMD_COMPLETE); 3241 } 3242 /* 3243 * Now turn target into what the actual Loop ID is. 3244 */ 3245 target = lp->loopid; 3246 } 3247 3248 /* 3249 * Next check to see if any HBA or Device 3250 * parameters need to be updated. 3251 */ 3252 if (isp->isp_update != 0) { 3253 isp_update(isp); 3254 } 3255 3256 if (isp_getrqentry(isp, &nxti, &optr, (void *)&qep)) { 3257 isp_prt(isp, ISP_LOGDEBUG0, "Request Queue Overflow"); 3258 XS_SETERR(xs, HBA_BOTCH); 3259 return (CMD_EAGAIN); 3260 } 3261 3262 /* 3263 * Now see if we need to synchronize the ISP with respect to anything. 3264 * We do dual duty here (cough) for synchronizing for busses other 3265 * than which we got here to send a command to. 3266 */ 3267 reqp = (ispreq_t *) local; 3268 if (isp->isp_sendmarker) { 3269 u_int8_t n = (IS_DUALBUS(isp)? 2: 1); 3270 /* 3271 * Check ports to send markers for... 3272 */ 3273 for (i = 0; i < n; i++) { 3274 if ((isp->isp_sendmarker & (1 << i)) == 0) { 3275 continue; 3276 } 3277 MEMZERO((void *) reqp, QENTRY_LEN); 3278 reqp->req_header.rqs_entry_count = 1; 3279 reqp->req_header.rqs_entry_type = RQSTYPE_MARKER; 3280 reqp->req_modifier = SYNC_ALL; 3281 reqp->req_target = i << 7; /* insert bus number */ 3282 isp_put_request(isp, reqp, qep); 3283 ISP_ADD_REQUEST(isp, nxti); 3284 isp->isp_sendmarker &= ~(1 << i); 3285 if (isp_getrqentry(isp, &nxti, &optr, (void *) &qep)) { 3286 isp_prt(isp, ISP_LOGDEBUG0, 3287 "Request Queue Overflow+"); 3288 XS_SETERR(xs, HBA_BOTCH); 3289 return (CMD_EAGAIN); 3290 } 3291 } 3292 } 3293 3294 MEMZERO((void *)reqp, QENTRY_LEN); 3295 reqp->req_header.rqs_entry_count = 1; 3296 if (IS_FC(isp)) { 3297 reqp->req_header.rqs_entry_type = RQSTYPE_T2RQS; 3298 } else { 3299 if (XS_CDBLEN(xs) > 12) 3300 reqp->req_header.rqs_entry_type = RQSTYPE_CMDONLY; 3301 else 3302 reqp->req_header.rqs_entry_type = RQSTYPE_REQUEST; 3303 } 3304 /* reqp->req_header.rqs_flags = 0; */ 3305 /* reqp->req_header.rqs_seqno = 0; */ 3306 if (IS_FC(isp)) { 3307 /* 3308 * See comment in isp_intr 3309 */ 3310 /* XS_RESID(xs) = 0; */ 3311 3312 /* 3313 * Fibre Channel always requires some kind of tag. 3314 * The Qlogic drivers seem be happy not to use a tag, 3315 * but this breaks for some devices (IBM drives). 3316 */ 3317 if (XS_TAG_P(xs)) { 3318 ((ispreqt2_t *)reqp)->req_flags = XS_TAG_TYPE(xs); 3319 } else { 3320 /* 3321 * If we don't know what tag to use, use HEAD OF QUEUE 3322 * for Request Sense or Simple. 3323 */ 3324 if (XS_CDBP(xs)[0] == 0x3) /* REQUEST SENSE */ 3325 ((ispreqt2_t *)reqp)->req_flags = REQFLAG_HTAG; 3326 else 3327 ((ispreqt2_t *)reqp)->req_flags = REQFLAG_STAG; 3328 } 3329 } else { 3330 sdparam *sdp = (sdparam *)isp->isp_param; 3331 sdp += XS_CHANNEL(xs); 3332 if ((sdp->isp_devparam[target].actv_flags & DPARM_TQING) && 3333 XS_TAG_P(xs)) { 3334 reqp->req_flags = XS_TAG_TYPE(xs); 3335 } 3336 } 3337 if (IS_SCSI(isp)) { 3338 reqp->req_target = target | (XS_CHANNEL(xs) << 7); 3339 reqp->req_lun_trn = XS_LUN(xs); 3340 reqp->req_cdblen = XS_CDBLEN(xs); 3341 } else if (IS_2KLOGIN(isp)) { 3342 ((ispreqt2e_t *)reqp)->req_target = target; 3343 ((ispreqt2e_t *)reqp)->req_scclun = XS_LUN(xs); 3344 } else if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) { 3345 ((ispreqt2_t *)reqp)->req_target = target; 3346 ((ispreqt2_t *)reqp)->req_scclun = XS_LUN(xs); 3347 } else { 3348 ((ispreqt2_t *)reqp)->req_target = target; 3349 ((ispreqt2_t *)reqp)->req_lun_trn = XS_LUN(xs); 3350 } 3351 MEMCPY(reqp->req_cdb, XS_CDBP(xs), XS_CDBLEN(xs)); 3352 3353 reqp->req_time = XS_TIME(xs) / 1000; 3354 if (reqp->req_time == 0 && XS_TIME(xs)) { 3355 reqp->req_time = 1; 3356 } 3357 3358 if (isp_save_xs(isp, xs, &handle)) { 3359 isp_prt(isp, ISP_LOGDEBUG0, "out of xflist pointers"); 3360 XS_SETERR(xs, HBA_BOTCH); 3361 return (CMD_EAGAIN); 3362 } 3363 reqp->req_handle = handle; 3364 3365 /* 3366 * Set up DMA and/or do any bus swizzling of the request entry 3367 * so that the Qlogic F/W understands what is being asked of it. 3368 */ 3369 i = ISP_DMASETUP(isp, xs, reqp, &nxti, optr); 3370 if (i != CMD_QUEUED) { 3371 isp_destroy_handle(isp, handle); 3372 /* 3373 * dmasetup sets actual error in packet, and 3374 * return what we were given to return. 3375 */ 3376 return (i); 3377 } 3378 XS_SETERR(xs, HBA_NOERROR); 3379 isp_prt(isp, ISP_LOGDEBUG2, 3380 "START cmd for %d.%d.%d cmd 0x%x datalen %ld", 3381 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs), XS_CDBP(xs)[0], 3382 (long) XS_XFRLEN(xs)); 3383 ISP_ADD_REQUEST(isp, nxti); 3384 isp->isp_nactive++; 3385 return (CMD_QUEUED); 3386} 3387 3388/* 3389 * isp control 3390 * Locks (ints blocked) assumed held. 3391 */ 3392 3393int 3394isp_control(struct ispsoftc *isp, ispctl_t ctl, void *arg) 3395{ 3396 XS_T *xs; 3397 mbreg_t mbs; 3398 int bus, tgt; 3399 u_int16_t handle; 3400 3401 MEMZERO(&mbs, sizeof (mbs)); 3402 3403 switch (ctl) { 3404 default: 3405 isp_prt(isp, ISP_LOGERR, "Unknown Control Opcode 0x%x", ctl); 3406 break; 3407 3408 case ISPCTL_RESET_BUS: 3409 /* 3410 * Issue a bus reset. 3411 */ 3412 mbs.param[0] = MBOX_BUS_RESET; 3413 mbs.param[2] = 0; 3414 if (IS_SCSI(isp)) { 3415 mbs.param[1] = 3416 ((sdparam *) isp->isp_param)->isp_bus_reset_delay; 3417 if (mbs.param[1] < 2) 3418 mbs.param[1] = 2; 3419 bus = *((int *) arg); 3420 if (IS_DUALBUS(isp)) 3421 mbs.param[2] = bus; 3422 } else { 3423 mbs.param[1] = 10; 3424 bus = 0; 3425 } 3426 isp->isp_sendmarker |= (1 << bus); 3427 isp_mboxcmd(isp, &mbs, MBLOGALL); 3428 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3429 break; 3430 } 3431 isp_prt(isp, ISP_LOGINFO, 3432 "driver initiated bus reset of bus %d", bus); 3433 return (0); 3434 3435 case ISPCTL_RESET_DEV: 3436 tgt = (*((int *) arg)) & 0xffff; 3437 bus = (*((int *) arg)) >> 16; 3438 mbs.param[0] = MBOX_ABORT_TARGET; 3439 if (IS_SCSI(isp)) { 3440 mbs.param[1] = (tgt << 8) | (bus << 15); 3441 } else { 3442 if (IS_2KLOGIN(isp)) { 3443 mbs.param[1] = tgt; 3444 mbs.obits |= (1 << 10); 3445 } else { 3446 mbs.param[1] = (tgt << 8); 3447 } 3448 } 3449 mbs.param[2] = 3; /* 'delay', in seconds */ 3450 isp_mboxcmd(isp, &mbs, MBLOGALL); 3451 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3452 break; 3453 } 3454 isp_prt(isp, ISP_LOGINFO, 3455 "Target %d on Bus %d Reset Succeeded", tgt, bus); 3456 isp->isp_sendmarker |= (1 << bus); 3457 return (0); 3458 3459 case ISPCTL_ABORT_CMD: 3460 xs = (XS_T *) arg; 3461 tgt = XS_TGT(xs); 3462 handle = isp_find_handle(isp, xs); 3463 if (handle == 0) { 3464 isp_prt(isp, ISP_LOGWARN, 3465 "cannot find handle for command to abort"); 3466 break; 3467 } 3468 bus = XS_CHANNEL(xs); 3469 mbs.param[0] = MBOX_ABORT; 3470 if (IS_FC(isp)) { 3471 if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) { 3472 if (IS_2KLOGIN(isp)) { 3473 mbs.param[1] = tgt; 3474 } else { 3475 mbs.param[1] = tgt << 8; 3476 } 3477 mbs.param[4] = 0; 3478 mbs.param[5] = 0; 3479 mbs.param[6] = XS_LUN(xs); 3480 } else { 3481 mbs.param[1] = tgt << 8 | XS_LUN(xs); 3482 } 3483 } else { 3484 mbs.param[1] = 3485 (bus << 15) | (XS_TGT(xs) << 8) | XS_LUN(xs); 3486 } 3487 mbs.param[3] = 0; 3488 mbs.param[2] = handle; 3489 isp_mboxcmd(isp, &mbs, MBLOGALL & ~MBOX_COMMAND_ERROR); 3490 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 3491 return (0); 3492 } 3493 /* 3494 * XXX: Look for command in the REQUEST QUEUE. That is, 3495 * XXX: It hasen't been picked up by firmware yet. 3496 */ 3497 break; 3498 3499 case ISPCTL_UPDATE_PARAMS: 3500 3501 isp_update(isp); 3502 return (0); 3503 3504 case ISPCTL_FCLINK_TEST: 3505 3506 if (IS_FC(isp)) { 3507 int usdelay = (arg)? *((int *) arg) : 250000; 3508 return (isp_fclink_test(isp, usdelay)); 3509 } 3510 break; 3511 3512 case ISPCTL_SCAN_FABRIC: 3513 3514 if (IS_FC(isp)) { 3515 int ftype = (arg)? *((int *) arg) : FC4_SCSI; 3516 return (isp_scan_fabric(isp, ftype)); 3517 } 3518 break; 3519 3520 case ISPCTL_SCAN_LOOP: 3521 3522 if (IS_FC(isp)) { 3523 return (isp_scan_loop(isp)); 3524 } 3525 break; 3526 3527 case ISPCTL_PDB_SYNC: 3528 3529 if (IS_FC(isp)) { 3530 return (isp_pdb_sync(isp)); 3531 } 3532 break; 3533 3534 case ISPCTL_SEND_LIP: 3535 3536 if (IS_FC(isp)) { 3537 mbs.param[0] = MBOX_INIT_LIP; 3538 isp_mboxcmd(isp, &mbs, MBLOGALL); 3539 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 3540 return (0); 3541 } 3542 } 3543 break; 3544 3545 case ISPCTL_GET_POSMAP: 3546 3547 if (IS_FC(isp) && arg) { 3548 return (isp_getmap(isp, arg)); 3549 } 3550 break; 3551 3552 3553 case ISPCTL_GET_PDB: 3554 if (IS_FC(isp) && arg) { 3555 int id = *((int *)arg); 3556 isp_pdb_t *pdb = arg; 3557 return (isp_getpdb(isp, id, pdb)); 3558 } 3559 break; 3560 3561 case ISPCTL_RUN_MBOXCMD: 3562 3563 isp_mboxcmd(isp, arg, MBLOGALL); 3564 return(0); 3565 3566#ifdef ISP_TARGET_MODE 3567 case ISPCTL_TOGGLE_TMODE: 3568 { 3569 3570 /* 3571 * We don't check/set against role here- that's the 3572 * responsibility for the outer layer to coordinate. 3573 */ 3574 if (IS_SCSI(isp)) { 3575 int param = *(int *)arg; 3576 mbs.param[0] = MBOX_ENABLE_TARGET_MODE; 3577 mbs.param[1] = param & 0xffff; 3578 mbs.param[2] = param >> 16; 3579 isp_mboxcmd(isp, &mbs, MBLOGALL); 3580 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3581 break; 3582 } 3583 } 3584 return (0); 3585 } 3586#endif 3587 } 3588 return (-1); 3589} 3590 3591/* 3592 * Interrupt Service Routine(s). 3593 * 3594 * External (OS) framework has done the appropriate locking, 3595 * and the locking will be held throughout this function. 3596 */ 3597 3598/* 3599 * Limit our stack depth by sticking with the max likely number 3600 * of completions on a request queue at any one time. 3601 */ 3602#ifndef MAX_REQUESTQ_COMPLETIONS 3603#define MAX_REQUESTQ_COMPLETIONS 64 3604#endif 3605 3606void 3607isp_intr(struct ispsoftc *isp, u_int16_t isr, u_int16_t sema, u_int16_t mbox) 3608{ 3609 XS_T *complist[MAX_REQUESTQ_COMPLETIONS], *xs; 3610 u_int16_t iptr, optr, junk; 3611 int i, nlooked = 0, ndone = 0; 3612 3613again: 3614 /* 3615 * Is this a mailbox related interrupt? 3616 * The mailbox semaphore will be nonzero if so. 3617 */ 3618 if (sema) { 3619 if (mbox & 0x4000) { 3620 isp->isp_intmboxc++; 3621 if (isp->isp_mboxbsy) { 3622 int i = 0, obits = isp->isp_obits; 3623 isp->isp_mboxtmp[i++] = mbox; 3624 for (i = 1; i < MAX_MAILBOX(isp); i++) { 3625 if ((obits & (1 << i)) == 0) { 3626 continue; 3627 } 3628 isp->isp_mboxtmp[i] = 3629 ISP_READ(isp, MBOX_OFF(i)); 3630 } 3631 if (isp->isp_mbxwrk0) { 3632 if (isp_mbox_continue(isp) == 0) { 3633 return; 3634 } 3635 } 3636 MBOX_NOTIFY_COMPLETE(isp); 3637 } else { 3638 isp_prt(isp, ISP_LOGWARN, 3639 "Mbox Command Async (0x%x) with no waiters", 3640 mbox); 3641 } 3642 } else if (isp_parse_async(isp, mbox) < 0) { 3643 return; 3644 } 3645 if ((IS_FC(isp) && mbox != ASYNC_RIO_RESP) || 3646 isp->isp_state != ISP_RUNSTATE) { 3647 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3648 ISP_WRITE(isp, BIU_SEMA, 0); 3649 return; 3650 } 3651 } 3652 3653 /* 3654 * We can't be getting this now. 3655 */ 3656 if (isp->isp_state != ISP_RUNSTATE) { 3657 isp_prt(isp, ISP_LOGWARN, 3658 "interrupt (ISR=%x SEMA=%x) when not ready", isr, sema); 3659 /* 3660 * Thank you very much! *Burrrp*! 3661 */ 3662 WRITE_RESPONSE_QUEUE_OUT_POINTER(isp, 3663 READ_RESPONSE_QUEUE_IN_POINTER(isp)); 3664 3665 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3666 ISP_WRITE(isp, BIU_SEMA, 0); 3667 return; 3668 } 3669 3670 /* 3671 * Get the current Response Queue Out Pointer. 3672 * 3673 * If we're a 2300, we can ask what hardware what it thinks. 3674 */ 3675 if (IS_23XX(isp)) { 3676 optr = ISP_READ(isp, isp->isp_respoutrp); 3677 /* 3678 * Debug: to be taken out eventually 3679 */ 3680 if (isp->isp_residx != optr) { 3681 isp_prt(isp, ISP_LOGWARN, "optr %x soft optr %x", 3682 optr, isp->isp_residx); 3683 } 3684 } else { 3685 optr = isp->isp_residx; 3686 } 3687 3688 /* 3689 * You *must* read the Response Queue In Pointer 3690 * prior to clearing the RISC interrupt. 3691 * 3692 * Debounce the 2300 if revision less than 2. 3693 */ 3694 if (IS_2100(isp) || (IS_2300(isp) && isp->isp_revision < 2)) { 3695 i = 0; 3696 do { 3697 iptr = READ_RESPONSE_QUEUE_IN_POINTER(isp); 3698 junk = READ_RESPONSE_QUEUE_IN_POINTER(isp); 3699 } while (junk != iptr && ++i < 1000); 3700 3701 if (iptr != junk) { 3702 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3703 isp_prt(isp, ISP_LOGWARN, 3704 "Response Queue Out Pointer Unstable (%x, %x)", 3705 iptr, junk); 3706 return; 3707 } 3708 } else { 3709 iptr = READ_RESPONSE_QUEUE_IN_POINTER(isp); 3710 } 3711 isp->isp_resodx = iptr; 3712 3713 3714 if (optr == iptr && sema == 0) { 3715 /* 3716 * There are a lot of these- reasons unknown- mostly on 3717 * faster Alpha machines. 3718 * 3719 * I tried delaying after writing HCCR_CMD_CLEAR_RISC_INT to 3720 * make sure the old interrupt went away (to avoid 'ringing' 3721 * effects), but that didn't stop this from occurring. 3722 */ 3723 if (IS_23XX(isp)) { 3724 USEC_DELAY(100); 3725 iptr = READ_RESPONSE_QUEUE_IN_POINTER(isp); 3726 junk = ISP_READ(isp, BIU_R2HSTSLO); 3727 } else { 3728 junk = ISP_READ(isp, BIU_ISR); 3729 } 3730 if (optr == iptr) { 3731 if (IS_23XX(isp)) { 3732 ; 3733 } else { 3734 sema = ISP_READ(isp, BIU_SEMA); 3735 mbox = ISP_READ(isp, OUTMAILBOX0); 3736 if ((sema & 0x3) && (mbox & 0x8000)) { 3737 goto again; 3738 } 3739 } 3740 isp->isp_intbogus++; 3741 isp_prt(isp, ISP_LOGDEBUG1, 3742 "bogus intr- isr %x (%x) iptr %x optr %x", 3743 isr, junk, iptr, optr); 3744 } 3745 } 3746 isp->isp_resodx = iptr; 3747 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 3748 ISP_WRITE(isp, BIU_SEMA, 0); 3749 3750 if (isp->isp_rspbsy) { 3751 return; 3752 } 3753 isp->isp_rspbsy = 1; 3754 3755 while (optr != iptr) { 3756 ispstatusreq_t local, *sp = &local; 3757 isphdr_t *hp; 3758 int type; 3759 u_int16_t oop; 3760 int buddaboom = 0; 3761 3762 hp = (isphdr_t *) ISP_QUEUE_ENTRY(isp->isp_result, optr); 3763 oop = optr; 3764 optr = ISP_NXT_QENTRY(optr, RESULT_QUEUE_LEN(isp)); 3765 nlooked++; 3766 read_again: 3767 /* 3768 * Synchronize our view of this response queue entry. 3769 */ 3770 MEMORYBARRIER(isp, SYNC_RESULT, oop, QENTRY_LEN); 3771 3772 type = isp_get_response_type(isp, hp); 3773 3774 if (type == RQSTYPE_RESPONSE) { 3775 isp_get_response(isp, (ispstatusreq_t *) hp, sp); 3776 } else if (type == RQSTYPE_RIO2) { 3777 isp_rio2_t rio; 3778 isp_get_rio2(isp, (isp_rio2_t *) hp, &rio); 3779 for (i = 0; i < rio.req_header.rqs_seqno; i++) { 3780 isp_fastpost_complete(isp, rio.req_handles[i]); 3781 } 3782 if (isp->isp_fpcchiwater < rio.req_header.rqs_seqno) 3783 isp->isp_fpcchiwater = rio.req_header.rqs_seqno; 3784 MEMZERO(hp, QENTRY_LEN); /* PERF */ 3785 continue; 3786 } else { 3787 /* 3788 * Somebody reachable via isp_handle_other_response 3789 * may have updated the response queue pointers for 3790 * us, so we reload our goal index. 3791 */ 3792 int i = isp_handle_other_response(isp, type, hp, &optr); 3793 if (i < 0) { 3794 goto read_again; 3795 } else if (i > 0) { 3796 iptr = isp->isp_resodx; 3797 MEMZERO(hp, QENTRY_LEN); /* PERF */ 3798 continue; 3799 } 3800 3801 /* 3802 * After this point, we'll just look at the header as 3803 * we don't know how to deal with the rest of the 3804 * response. 3805 */ 3806 isp_get_response(isp, (ispstatusreq_t *) hp, sp); 3807 3808 /* 3809 * It really has to be a bounced request just copied 3810 * from the request queue to the response queue. If 3811 * not, something bad has happened. 3812 */ 3813 if (sp->req_header.rqs_entry_type != RQSTYPE_REQUEST) { 3814 isp_prt(isp, ISP_LOGERR, notresp, 3815 sp->req_header.rqs_entry_type, oop, optr, 3816 nlooked); 3817 if (isp->isp_dblev & ISP_LOGDEBUG0) { 3818 isp_print_bytes(isp, "Queue Entry", 3819 QENTRY_LEN, sp); 3820 } 3821 MEMZERO(hp, QENTRY_LEN); /* PERF */ 3822 continue; 3823 } 3824 buddaboom = 1; 3825 } 3826 3827 if (sp->req_header.rqs_flags & 0xf) { 3828#define _RQS_OFLAGS \ 3829 ~(RQSFLAG_CONTINUATION|RQSFLAG_FULL|RQSFLAG_BADHEADER|RQSFLAG_BADPACKET) 3830 if (sp->req_header.rqs_flags & RQSFLAG_CONTINUATION) { 3831 isp_prt(isp, ISP_LOGWARN, 3832 "continuation segment"); 3833 WRITE_RESPONSE_QUEUE_OUT_POINTER(isp, optr); 3834 continue; 3835 } 3836 if (sp->req_header.rqs_flags & RQSFLAG_FULL) { 3837 isp_prt(isp, ISP_LOGDEBUG1, 3838 "internal queues full"); 3839 /* 3840 * We'll synthesize a QUEUE FULL message below. 3841 */ 3842 } 3843 if (sp->req_header.rqs_flags & RQSFLAG_BADHEADER) { 3844 isp_prt(isp, ISP_LOGERR, "bad header flag"); 3845 buddaboom++; 3846 } 3847 if (sp->req_header.rqs_flags & RQSFLAG_BADPACKET) { 3848 isp_prt(isp, ISP_LOGERR, "bad request packet"); 3849 buddaboom++; 3850 } 3851 if (sp->req_header.rqs_flags & _RQS_OFLAGS) { 3852 isp_prt(isp, ISP_LOGERR, 3853 "unknown flags (0x%x) in response", 3854 sp->req_header.rqs_flags); 3855 buddaboom++; 3856 } 3857#undef _RQS_OFLAGS 3858 } 3859 if (sp->req_handle > isp->isp_maxcmds || sp->req_handle < 1) { 3860 MEMZERO(hp, QENTRY_LEN); /* PERF */ 3861 isp_prt(isp, ISP_LOGERR, 3862 "bad request handle %d (type 0x%x, flags 0x%x)", 3863 sp->req_handle, sp->req_header.rqs_entry_type, 3864 sp->req_header.rqs_flags); 3865 WRITE_RESPONSE_QUEUE_OUT_POINTER(isp, optr); 3866 continue; 3867 } 3868 xs = isp_find_xs(isp, sp->req_handle); 3869 if (xs == NULL) { 3870 u_int8_t ts = sp->req_completion_status & 0xff; 3871 MEMZERO(hp, QENTRY_LEN); /* PERF */ 3872 /* 3873 * Only whine if this isn't the expected fallout of 3874 * aborting the command. 3875 */ 3876 if (sp->req_header.rqs_entry_type != RQSTYPE_RESPONSE) { 3877 isp_prt(isp, ISP_LOGERR, 3878 "cannot find handle 0x%x (type 0x%x)", 3879 sp->req_handle, 3880 sp->req_header.rqs_entry_type); 3881 } else if (ts != RQCS_ABORTED) { 3882 isp_prt(isp, ISP_LOGERR, 3883 "cannot find handle 0x%x (status 0x%x)", 3884 sp->req_handle, ts); 3885 } 3886 WRITE_RESPONSE_QUEUE_OUT_POINTER(isp, optr); 3887 continue; 3888 } 3889 isp_destroy_handle(isp, sp->req_handle); 3890 if (sp->req_status_flags & RQSTF_BUS_RESET) { 3891 XS_SETERR(xs, HBA_BUSRESET); 3892 isp->isp_sendmarker |= (1 << XS_CHANNEL(xs)); 3893 } 3894 if (buddaboom) { 3895 XS_SETERR(xs, HBA_BOTCH); 3896 } 3897 3898 if (IS_FC(isp) && (sp->req_scsi_status & RQCS_SV)) { 3899 /* 3900 * Fibre Channel F/W doesn't say we got status 3901 * if there's Sense Data instead. I guess they 3902 * think it goes w/o saying. 3903 */ 3904 sp->req_state_flags |= RQSF_GOT_STATUS; 3905 } 3906 if (sp->req_state_flags & RQSF_GOT_STATUS) { 3907 *XS_STSP(xs) = sp->req_scsi_status & 0xff; 3908 } 3909 3910 switch (sp->req_header.rqs_entry_type) { 3911 case RQSTYPE_RESPONSE: 3912 XS_SET_STATE_STAT(isp, xs, sp); 3913 isp_parse_status(isp, sp, xs); 3914 if ((XS_NOERR(xs) || XS_ERR(xs) == HBA_NOERROR) && 3915 (*XS_STSP(xs) == SCSI_BUSY)) { 3916 XS_SETERR(xs, HBA_TGTBSY); 3917 } 3918 if (IS_SCSI(isp)) { 3919 XS_RESID(xs) = sp->req_resid; 3920 if ((sp->req_state_flags & RQSF_GOT_STATUS) && 3921 (*XS_STSP(xs) == SCSI_CHECK) && 3922 (sp->req_state_flags & RQSF_GOT_SENSE)) { 3923 XS_SAVE_SENSE(xs, sp); 3924 } 3925 /* 3926 * A new synchronous rate was negotiated for 3927 * this target. Mark state such that we'll go 3928 * look up that which has changed later. 3929 */ 3930 if (sp->req_status_flags & RQSTF_NEGOTIATION) { 3931 int t = XS_TGT(xs); 3932 sdparam *sdp = isp->isp_param; 3933 sdp += XS_CHANNEL(xs); 3934 sdp->isp_devparam[t].dev_refresh = 1; 3935 isp->isp_update |= 3936 (1 << XS_CHANNEL(xs)); 3937 } 3938 } else { 3939 if (sp->req_status_flags & RQSF_XFER_COMPLETE) { 3940 XS_RESID(xs) = 0; 3941 } else if (sp->req_scsi_status & RQCS_RESID) { 3942 XS_RESID(xs) = sp->req_resid; 3943 } else { 3944 XS_RESID(xs) = 0; 3945 } 3946 if ((sp->req_state_flags & RQSF_GOT_STATUS) && 3947 (*XS_STSP(xs) == SCSI_CHECK) && 3948 (sp->req_scsi_status & RQCS_SV)) { 3949 XS_SAVE_SENSE(xs, sp); 3950 /* solely for the benefit of debug */ 3951 sp->req_state_flags |= RQSF_GOT_SENSE; 3952 } 3953 } 3954 isp_prt(isp, ISP_LOGDEBUG2, 3955 "asked for %ld got resid %ld", (long) XS_XFRLEN(xs), 3956 (long) sp->req_resid); 3957 break; 3958 case RQSTYPE_REQUEST: 3959 if (sp->req_header.rqs_flags & RQSFLAG_FULL) { 3960 /* 3961 * Force Queue Full status. 3962 */ 3963 *XS_STSP(xs) = SCSI_QFULL; 3964 XS_SETERR(xs, HBA_NOERROR); 3965 } else if (XS_NOERR(xs)) { 3966 /* 3967 * ???? 3968 */ 3969 isp_prt(isp, ISP_LOGDEBUG0, 3970 "Request Queue Entry bounced back"); 3971 XS_SETERR(xs, HBA_BOTCH); 3972 } 3973 XS_RESID(xs) = XS_XFRLEN(xs); 3974 break; 3975 default: 3976 isp_prt(isp, ISP_LOGWARN, 3977 "unhandled response queue type 0x%x", 3978 sp->req_header.rqs_entry_type); 3979 if (XS_NOERR(xs)) { 3980 XS_SETERR(xs, HBA_BOTCH); 3981 } 3982 break; 3983 } 3984 3985 /* 3986 * Free any DMA resources. As a side effect, this may 3987 * also do any cache flushing necessary for data coherence. */ 3988 if (XS_XFRLEN(xs)) { 3989 ISP_DMAFREE(isp, xs, sp->req_handle); 3990 } 3991 3992 if (((isp->isp_dblev & (ISP_LOGDEBUG2|ISP_LOGDEBUG3))) || 3993 ((isp->isp_dblev & ISP_LOGDEBUG1) && ((!XS_NOERR(xs)) || 3994 (*XS_STSP(xs) != SCSI_GOOD)))) { 3995 char skey; 3996 if (sp->req_state_flags & RQSF_GOT_SENSE) { 3997 skey = XS_SNSKEY(xs) & 0xf; 3998 if (skey < 10) 3999 skey += '0'; 4000 else 4001 skey += 'a' - 10; 4002 } else if (*XS_STSP(xs) == SCSI_CHECK) { 4003 skey = '?'; 4004 } else { 4005 skey = '.'; 4006 } 4007 isp_prt(isp, ISP_LOGALL, finmsg, XS_CHANNEL(xs), 4008 XS_TGT(xs), XS_LUN(xs), XS_XFRLEN(xs), XS_RESID(xs), 4009 *XS_STSP(xs), skey, XS_ERR(xs)); 4010 } 4011 4012 if (isp->isp_nactive > 0) 4013 isp->isp_nactive--; 4014 complist[ndone++] = xs; /* defer completion call until later */ 4015 MEMZERO(hp, QENTRY_LEN); /* PERF */ 4016 if (ndone == MAX_REQUESTQ_COMPLETIONS) { 4017 break; 4018 } 4019 } 4020 4021 /* 4022 * If we looked at any commands, then it's valid to find out 4023 * what the outpointer is. It also is a trigger to update the 4024 * ISP's notion of what we've seen so far. 4025 */ 4026 if (nlooked) { 4027 WRITE_RESPONSE_QUEUE_OUT_POINTER(isp, optr); 4028 /* 4029 * While we're at it, read the requst queue out pointer. 4030 */ 4031 isp->isp_reqodx = READ_REQUEST_QUEUE_OUT_POINTER(isp); 4032 if (isp->isp_rscchiwater < ndone) 4033 isp->isp_rscchiwater = ndone; 4034 } 4035 4036 isp->isp_residx = optr; 4037 isp->isp_rspbsy = 0; 4038 for (i = 0; i < ndone; i++) { 4039 xs = complist[i]; 4040 if (xs) { 4041 isp->isp_rsltccmplt++; 4042 isp_done(xs); 4043 } 4044 } 4045} 4046 4047/* 4048 * Support routines. 4049 */ 4050 4051static int 4052isp_parse_async(struct ispsoftc *isp, u_int16_t mbox) 4053{ 4054 int rval = 0; 4055 int bus; 4056 4057 if (IS_DUALBUS(isp)) { 4058 bus = ISP_READ(isp, OUTMAILBOX6); 4059 } else { 4060 bus = 0; 4061 } 4062 isp_prt(isp, ISP_LOGDEBUG2, "Async Mbox 0x%x", mbox); 4063 4064 switch (mbox) { 4065 case ASYNC_BUS_RESET: 4066 isp->isp_sendmarker |= (1 << bus); 4067#ifdef ISP_TARGET_MODE 4068 if (isp_target_async(isp, bus, mbox)) 4069 rval = -1; 4070#endif 4071 isp_async(isp, ISPASYNC_BUS_RESET, &bus); 4072 break; 4073 case ASYNC_SYSTEM_ERROR: 4074#ifdef ISP_FW_CRASH_DUMP 4075 /* 4076 * If we have crash dumps enabled, it's up to the handler 4077 * for isp_async to reinit stuff and restart the firmware 4078 * after performing the crash dump. The reason we do things 4079 * this way is that we may need to activate a kernel thread 4080 * to do all the crash dump goop. 4081 */ 4082 isp_async(isp, ISPASYNC_FW_CRASH, NULL); 4083#else 4084 isp_async(isp, ISPASYNC_FW_CRASH, NULL); 4085 isp_reinit(isp); 4086 isp_async(isp, ISPASYNC_FW_RESTARTED, NULL); 4087#endif 4088 rval = -1; 4089 break; 4090 4091 case ASYNC_RQS_XFER_ERR: 4092 isp_prt(isp, ISP_LOGERR, "Request Queue Transfer Error"); 4093 break; 4094 4095 case ASYNC_RSP_XFER_ERR: 4096 isp_prt(isp, ISP_LOGERR, "Response Queue Transfer Error"); 4097 break; 4098 4099 case ASYNC_QWAKEUP: 4100 /* 4101 * We've just been notified that the Queue has woken up. 4102 * We don't need to be chatty about this- just unlatch things 4103 * and move on. 4104 */ 4105 mbox = READ_REQUEST_QUEUE_OUT_POINTER(isp); 4106 break; 4107 4108 case ASYNC_TIMEOUT_RESET: 4109 isp_prt(isp, ISP_LOGWARN, 4110 "timeout initiated SCSI bus reset of bus %d", bus); 4111 isp->isp_sendmarker |= (1 << bus); 4112#ifdef ISP_TARGET_MODE 4113 if (isp_target_async(isp, bus, mbox)) 4114 rval = -1; 4115#endif 4116 break; 4117 4118 case ASYNC_DEVICE_RESET: 4119 isp_prt(isp, ISP_LOGINFO, "device reset on bus %d", bus); 4120 isp->isp_sendmarker |= (1 << bus); 4121#ifdef ISP_TARGET_MODE 4122 if (isp_target_async(isp, bus, mbox)) 4123 rval = -1; 4124#endif 4125 break; 4126 4127 case ASYNC_EXTMSG_UNDERRUN: 4128 isp_prt(isp, ISP_LOGWARN, "extended message underrun"); 4129 break; 4130 4131 case ASYNC_SCAM_INT: 4132 isp_prt(isp, ISP_LOGINFO, "SCAM interrupt"); 4133 break; 4134 4135 case ASYNC_HUNG_SCSI: 4136 isp_prt(isp, ISP_LOGERR, 4137 "stalled SCSI Bus after DATA Overrun"); 4138 /* XXX: Need to issue SCSI reset at this point */ 4139 break; 4140 4141 case ASYNC_KILLED_BUS: 4142 isp_prt(isp, ISP_LOGERR, "SCSI Bus reset after DATA Overrun"); 4143 break; 4144 4145 case ASYNC_BUS_TRANSIT: 4146 mbox = ISP_READ(isp, OUTMAILBOX2); 4147 switch (mbox & 0x1c00) { 4148 case SXP_PINS_LVD_MODE: 4149 isp_prt(isp, ISP_LOGINFO, "Transition to LVD mode"); 4150 SDPARAM(isp)->isp_diffmode = 0; 4151 SDPARAM(isp)->isp_ultramode = 0; 4152 SDPARAM(isp)->isp_lvdmode = 1; 4153 break; 4154 case SXP_PINS_HVD_MODE: 4155 isp_prt(isp, ISP_LOGINFO, 4156 "Transition to Differential mode"); 4157 SDPARAM(isp)->isp_diffmode = 1; 4158 SDPARAM(isp)->isp_ultramode = 0; 4159 SDPARAM(isp)->isp_lvdmode = 0; 4160 break; 4161 case SXP_PINS_SE_MODE: 4162 isp_prt(isp, ISP_LOGINFO, 4163 "Transition to Single Ended mode"); 4164 SDPARAM(isp)->isp_diffmode = 0; 4165 SDPARAM(isp)->isp_ultramode = 1; 4166 SDPARAM(isp)->isp_lvdmode = 0; 4167 break; 4168 default: 4169 isp_prt(isp, ISP_LOGWARN, 4170 "Transition to Unknown Mode 0x%x", mbox); 4171 break; 4172 } 4173 /* 4174 * XXX: Set up to renegotiate again! 4175 */ 4176 /* Can only be for a 1080... */ 4177 isp->isp_sendmarker |= (1 << bus); 4178 break; 4179 4180 /* 4181 * We can use bus, which will always be zero for FC cards, 4182 * as a mailbox pattern accumulator to be checked below. 4183 */ 4184 case ASYNC_RIO5: 4185 bus = 0x1ce; /* outgoing mailbox regs 1-3, 6-7 */ 4186 break; 4187 4188 case ASYNC_RIO4: 4189 bus = 0x14e; /* outgoing mailbox regs 1-3, 6 */ 4190 break; 4191 4192 case ASYNC_RIO3: 4193 bus = 0x10e; /* outgoing mailbox regs 1-3 */ 4194 break; 4195 4196 case ASYNC_RIO2: 4197 bus = 0x106; /* outgoing mailbox regs 1-2 */ 4198 break; 4199 4200 case ASYNC_RIO1: 4201 case ASYNC_CMD_CMPLT: 4202 bus = 0x102; /* outgoing mailbox regs 1 */ 4203 break; 4204 4205 case ASYNC_RIO_RESP: 4206 return (rval); 4207 4208 case ASYNC_CTIO_DONE: 4209 { 4210#ifdef ISP_TARGET_MODE 4211 int handle = 4212 (ISP_READ(isp, OUTMAILBOX2) << 16) | 4213 (ISP_READ(isp, OUTMAILBOX1)); 4214 if (isp_target_async(isp, handle, mbox)) { 4215 rval = -1; 4216 } else { 4217 /* count it as a fast posting intr */ 4218 isp->isp_fphccmplt++; 4219 } 4220#else 4221 isp_prt(isp, ISP_LOGINFO, "Fast Posting CTIO done"); 4222 isp->isp_fphccmplt++; /* count it as a fast posting intr */ 4223#endif 4224 break; 4225 } 4226 case ASYNC_LIP_F8: 4227 case ASYNC_LIP_OCCURRED: 4228 FCPARAM(isp)->isp_fwstate = FW_CONFIG_WAIT; 4229 FCPARAM(isp)->isp_loopstate = LOOP_LIP_RCVD; 4230 isp->isp_sendmarker = 1; 4231 isp_mark_getpdb_all(isp); 4232 isp_async(isp, ISPASYNC_LIP, NULL); 4233#ifdef ISP_TARGET_MODE 4234 if (isp_target_async(isp, bus, mbox)) 4235 rval = -1; 4236#endif 4237 /* 4238 * We've had problems with data corruption occuring on 4239 * commands that complete (with no apparent error) after 4240 * we receive a LIP. This has been observed mostly on 4241 * Local Loop topologies. To be safe, let's just mark 4242 * all active commands as dead. 4243 */ 4244 if (FCPARAM(isp)->isp_topo == TOPO_NL_PORT || 4245 FCPARAM(isp)->isp_topo == TOPO_FL_PORT) { 4246 int i, j; 4247 for (i = j = 0; i < isp->isp_maxcmds; i++) { 4248 XS_T *xs; 4249 xs = isp->isp_xflist[i]; 4250 if (xs != NULL) { 4251 j++; 4252 XS_SETERR(xs, HBA_BUSRESET); 4253 } 4254 } 4255 if (j) { 4256 isp_prt(isp, ISP_LOGERR, 4257 "LIP destroyed %d active commands", j); 4258 } 4259 } 4260 break; 4261 4262 case ASYNC_LOOP_UP: 4263 isp->isp_sendmarker = 1; 4264 FCPARAM(isp)->isp_fwstate = FW_CONFIG_WAIT; 4265 FCPARAM(isp)->isp_loopstate = LOOP_LIP_RCVD; 4266 isp_mark_getpdb_all(isp); 4267 isp_async(isp, ISPASYNC_LOOP_UP, NULL); 4268#ifdef ISP_TARGET_MODE 4269 if (isp_target_async(isp, bus, mbox)) 4270 rval = -1; 4271#endif 4272 break; 4273 4274 case ASYNC_LOOP_DOWN: 4275 isp->isp_sendmarker = 1; 4276 FCPARAM(isp)->isp_fwstate = FW_CONFIG_WAIT; 4277 FCPARAM(isp)->isp_loopstate = LOOP_NIL; 4278 isp_mark_getpdb_all(isp); 4279 isp_async(isp, ISPASYNC_LOOP_DOWN, NULL); 4280#ifdef ISP_TARGET_MODE 4281 if (isp_target_async(isp, bus, mbox)) 4282 rval = -1; 4283#endif 4284 break; 4285 4286 case ASYNC_LOOP_RESET: 4287 isp->isp_sendmarker = 1; 4288 FCPARAM(isp)->isp_fwstate = FW_CONFIG_WAIT; 4289 FCPARAM(isp)->isp_loopstate = LOOP_NIL; 4290 isp_mark_getpdb_all(isp); 4291 isp_async(isp, ISPASYNC_LOOP_RESET, NULL); 4292#ifdef ISP_TARGET_MODE 4293 if (isp_target_async(isp, bus, mbox)) 4294 rval = -1; 4295#endif 4296 break; 4297 4298 case ASYNC_PDB_CHANGED: 4299 isp->isp_sendmarker = 1; 4300 FCPARAM(isp)->isp_loopstate = LOOP_PDB_RCVD; 4301 isp_mark_getpdb_all(isp); 4302 isp_async(isp, ISPASYNC_CHANGE_NOTIFY, ISPASYNC_CHANGE_PDB); 4303 break; 4304 4305 case ASYNC_CHANGE_NOTIFY: 4306 /* 4307 * Not correct, but it will force us to rescan the loop. 4308 */ 4309 FCPARAM(isp)->isp_loopstate = LOOP_PDB_RCVD; 4310 isp_mark_getpdb_all(isp); 4311 isp_async(isp, ISPASYNC_CHANGE_NOTIFY, ISPASYNC_CHANGE_SNS); 4312 break; 4313 4314 case ASYNC_PTPMODE: 4315 if (FCPARAM(isp)->isp_onfabric) 4316 FCPARAM(isp)->isp_topo = TOPO_F_PORT; 4317 else 4318 FCPARAM(isp)->isp_topo = TOPO_N_PORT; 4319 isp_mark_getpdb_all(isp); 4320 isp->isp_sendmarker = 1; 4321 FCPARAM(isp)->isp_fwstate = FW_CONFIG_WAIT; 4322 FCPARAM(isp)->isp_loopstate = LOOP_LIP_RCVD; 4323 isp_async(isp, ISPASYNC_CHANGE_NOTIFY, ISPASYNC_CHANGE_OTHER); 4324#ifdef ISP_TARGET_MODE 4325 if (isp_target_async(isp, bus, mbox)) 4326 rval = -1; 4327#endif 4328 isp_prt(isp, ISP_LOGINFO, "Point-to-Point mode"); 4329 break; 4330 4331 case ASYNC_CONNMODE: 4332 mbox = ISP_READ(isp, OUTMAILBOX1); 4333 isp_mark_getpdb_all(isp); 4334 switch (mbox) { 4335 case ISP_CONN_LOOP: 4336 isp_prt(isp, ISP_LOGINFO, 4337 "Point-to-Point -> Loop mode"); 4338 break; 4339 case ISP_CONN_PTP: 4340 isp_prt(isp, ISP_LOGINFO, 4341 "Loop -> Point-to-Point mode"); 4342 break; 4343 case ISP_CONN_BADLIP: 4344 isp_prt(isp, ISP_LOGWARN, 4345 "Point-to-Point -> Loop mode (BAD LIP)"); 4346 break; 4347 case ISP_CONN_FATAL: 4348 isp_prt(isp, ISP_LOGERR, "FATAL CONNECTION ERROR"); 4349#ifdef ISP_FW_CRASH_DUMP 4350 isp_async(isp, ISPASYNC_FW_CRASH, NULL); 4351#else 4352 isp_async(isp, ISPASYNC_FW_CRASH, NULL); 4353 isp_reinit(isp); 4354 isp_async(isp, ISPASYNC_FW_RESTARTED, NULL); 4355#endif 4356 return (-1); 4357 case ISP_CONN_LOOPBACK: 4358 isp_prt(isp, ISP_LOGWARN, 4359 "Looped Back in Point-to-Point mode"); 4360 break; 4361 default: 4362 isp_prt(isp, ISP_LOGWARN, 4363 "Unknown connection mode (0x%x)", mbox); 4364 break; 4365 } 4366 isp_async(isp, ISPASYNC_CHANGE_NOTIFY, ISPASYNC_CHANGE_OTHER); 4367 isp->isp_sendmarker = 1; 4368 FCPARAM(isp)->isp_fwstate = FW_CONFIG_WAIT; 4369 FCPARAM(isp)->isp_loopstate = LOOP_LIP_RCVD; 4370 break; 4371 4372 default: 4373 isp_prt(isp, ISP_LOGWARN, "Unknown Async Code 0x%x", mbox); 4374 break; 4375 } 4376 4377 if (bus & 0x100) { 4378 int i, nh; 4379 u_int16_t handles[16]; 4380 4381 for (nh = 0, i = 1; i < MAX_MAILBOX(isp); i++) { 4382 if ((bus & (1 << i)) == 0) { 4383 continue; 4384 } 4385 handles[nh++] = ISP_READ(isp, MBOX_OFF(i)); 4386 } 4387 for (i = 0; i < nh; i++) { 4388 isp_fastpost_complete(isp, handles[i]); 4389 isp_prt(isp, ISP_LOGDEBUG3, 4390 "fast post completion of %u", handles[i]); 4391 } 4392 if (isp->isp_fpcchiwater < nh) 4393 isp->isp_fpcchiwater = nh; 4394 } else { 4395 isp->isp_intoasync++; 4396 } 4397 return (rval); 4398} 4399 4400/* 4401 * Handle other response entries. A pointer to the request queue output 4402 * index is here in case we want to eat several entries at once, although 4403 * this is not used currently. 4404 */ 4405 4406static int 4407isp_handle_other_response(struct ispsoftc *isp, int type, 4408 isphdr_t *hp, u_int16_t *optrp) 4409{ 4410 switch (type) { 4411 case RQSTYPE_STATUS_CONT: 4412 isp_prt(isp, ISP_LOGINFO, "Ignored Continuation Response"); 4413 return (1); 4414 case RQSTYPE_ATIO: 4415 case RQSTYPE_CTIO: 4416 case RQSTYPE_ENABLE_LUN: 4417 case RQSTYPE_MODIFY_LUN: 4418 case RQSTYPE_NOTIFY: 4419 case RQSTYPE_NOTIFY_ACK: 4420 case RQSTYPE_CTIO1: 4421 case RQSTYPE_ATIO2: 4422 case RQSTYPE_CTIO2: 4423 case RQSTYPE_CTIO3: 4424 isp->isp_rsltccmplt++; /* count as a response completion */ 4425#ifdef ISP_TARGET_MODE 4426 if (isp_target_notify(isp, (ispstatusreq_t *) hp, optrp)) { 4427 return (1); 4428 } 4429#endif 4430 /* FALLTHROUGH */ 4431 case RQSTYPE_REQUEST: 4432 default: 4433 USEC_DELAY(100); 4434 if (type != isp_get_response_type(isp, hp)) { 4435 /* 4436 * This is questionable- we're just papering over 4437 * something we've seen on SMP linux in target 4438 * mode- we don't really know what's happening 4439 * here that causes us to think we've gotten 4440 * an entry, but that either the entry isn't 4441 * filled out yet or our CPU read data is stale. 4442 */ 4443 isp_prt(isp, ISP_LOGINFO, 4444 "unstable type in response queue"); 4445 return (-1); 4446 } 4447 isp_prt(isp, ISP_LOGWARN, "Unhandled Response Type 0x%x", 4448 isp_get_response_type(isp, hp)); 4449 if (isp_async(isp, ISPASYNC_UNHANDLED_RESPONSE, hp)) { 4450 return (1); 4451 } 4452 return (0); 4453 } 4454} 4455 4456static void 4457isp_parse_status(struct ispsoftc *isp, ispstatusreq_t *sp, XS_T *xs) 4458{ 4459 switch (sp->req_completion_status & 0xff) { 4460 case RQCS_COMPLETE: 4461 if (XS_NOERR(xs)) { 4462 XS_SETERR(xs, HBA_NOERROR); 4463 } 4464 return; 4465 4466 case RQCS_INCOMPLETE: 4467 if ((sp->req_state_flags & RQSF_GOT_TARGET) == 0) { 4468 isp_prt(isp, ISP_LOGDEBUG1, 4469 "Selection Timeout for %d.%d.%d", 4470 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4471 if (XS_NOERR(xs)) { 4472 XS_SETERR(xs, HBA_SELTIMEOUT); 4473 } 4474 return; 4475 } 4476 isp_prt(isp, ISP_LOGERR, 4477 "command incomplete for %d.%d.%d, state 0x%x", 4478 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs), 4479 sp->req_state_flags); 4480 break; 4481 4482 case RQCS_DMA_ERROR: 4483 isp_prt(isp, ISP_LOGERR, "DMA error for command on %d.%d.%d", 4484 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4485 break; 4486 4487 case RQCS_TRANSPORT_ERROR: 4488 { 4489 char buf[172]; 4490 SNPRINTF(buf, sizeof (buf), "states=>"); 4491 if (sp->req_state_flags & RQSF_GOT_BUS) { 4492 SNPRINTF(buf, sizeof (buf), "%s GOT_BUS", buf); 4493 } 4494 if (sp->req_state_flags & RQSF_GOT_TARGET) { 4495 SNPRINTF(buf, sizeof (buf), "%s GOT_TGT", buf); 4496 } 4497 if (sp->req_state_flags & RQSF_SENT_CDB) { 4498 SNPRINTF(buf, sizeof (buf), "%s SENT_CDB", buf); 4499 } 4500 if (sp->req_state_flags & RQSF_XFRD_DATA) { 4501 SNPRINTF(buf, sizeof (buf), "%s XFRD_DATA", buf); 4502 } 4503 if (sp->req_state_flags & RQSF_GOT_STATUS) { 4504 SNPRINTF(buf, sizeof (buf), "%s GOT_STS", buf); 4505 } 4506 if (sp->req_state_flags & RQSF_GOT_SENSE) { 4507 SNPRINTF(buf, sizeof (buf), "%s GOT_SNS", buf); 4508 } 4509 if (sp->req_state_flags & RQSF_XFER_COMPLETE) { 4510 SNPRINTF(buf, sizeof (buf), "%s XFR_CMPLT", buf); 4511 } 4512 SNPRINTF(buf, sizeof (buf), "%s\nstatus=>", buf); 4513 if (sp->req_status_flags & RQSTF_DISCONNECT) { 4514 SNPRINTF(buf, sizeof (buf), "%s Disconnect", buf); 4515 } 4516 if (sp->req_status_flags & RQSTF_SYNCHRONOUS) { 4517 SNPRINTF(buf, sizeof (buf), "%s Sync_xfr", buf); 4518 } 4519 if (sp->req_status_flags & RQSTF_PARITY_ERROR) { 4520 SNPRINTF(buf, sizeof (buf), "%s Parity", buf); 4521 } 4522 if (sp->req_status_flags & RQSTF_BUS_RESET) { 4523 SNPRINTF(buf, sizeof (buf), "%s Bus_Reset", buf); 4524 } 4525 if (sp->req_status_flags & RQSTF_DEVICE_RESET) { 4526 SNPRINTF(buf, sizeof (buf), "%s Device_Reset", buf); 4527 } 4528 if (sp->req_status_flags & RQSTF_ABORTED) { 4529 SNPRINTF(buf, sizeof (buf), "%s Aborted", buf); 4530 } 4531 if (sp->req_status_flags & RQSTF_TIMEOUT) { 4532 SNPRINTF(buf, sizeof (buf), "%s Timeout", buf); 4533 } 4534 if (sp->req_status_flags & RQSTF_NEGOTIATION) { 4535 SNPRINTF(buf, sizeof (buf), "%s Negotiation", buf); 4536 } 4537 isp_prt(isp, ISP_LOGERR, "%s", buf); 4538 isp_prt(isp, ISP_LOGERR, "transport error for %d.%d.%d:\n%s", 4539 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs), buf); 4540 break; 4541 } 4542 case RQCS_RESET_OCCURRED: 4543 isp_prt(isp, ISP_LOGWARN, 4544 "bus reset destroyed command for %d.%d.%d", 4545 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4546 isp->isp_sendmarker |= (1 << XS_CHANNEL(xs)); 4547 if (XS_NOERR(xs)) { 4548 XS_SETERR(xs, HBA_BUSRESET); 4549 } 4550 return; 4551 4552 case RQCS_ABORTED: 4553 isp_prt(isp, ISP_LOGERR, "command aborted for %d.%d.%d", 4554 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4555 isp->isp_sendmarker |= (1 << XS_CHANNEL(xs)); 4556 if (XS_NOERR(xs)) { 4557 XS_SETERR(xs, HBA_ABORTED); 4558 } 4559 return; 4560 4561 case RQCS_TIMEOUT: 4562 isp_prt(isp, ISP_LOGWARN, "command timed out for %d.%d.%d", 4563 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4564 /* 4565 * Check to see if we logged out the device. 4566 */ 4567 if (IS_FC(isp)) { 4568 if ((sp->req_completion_status & RQSTF_LOGOUT) && 4569 FCPARAM(isp)->portdb[XS_TGT(xs)].valid && 4570 FCPARAM(isp)->portdb[XS_TGT(xs)].fabric_dev) { 4571 FCPARAM(isp)->portdb[XS_TGT(xs)].relogin = 1; 4572 } 4573 } 4574 if (XS_NOERR(xs)) { 4575 XS_SETERR(xs, HBA_CMDTIMEOUT); 4576 } 4577 return; 4578 4579 case RQCS_DATA_OVERRUN: 4580 XS_RESID(xs) = sp->req_resid; 4581 isp_prt(isp, ISP_LOGERR, "data overrun for command on %d.%d.%d", 4582 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4583 if (XS_NOERR(xs)) { 4584 XS_SETERR(xs, HBA_DATAOVR); 4585 } 4586 return; 4587 4588 case RQCS_COMMAND_OVERRUN: 4589 isp_prt(isp, ISP_LOGERR, 4590 "command overrun for command on %d.%d.%d", 4591 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4592 break; 4593 4594 case RQCS_STATUS_OVERRUN: 4595 isp_prt(isp, ISP_LOGERR, 4596 "status overrun for command on %d.%d.%d", 4597 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4598 break; 4599 4600 case RQCS_BAD_MESSAGE: 4601 isp_prt(isp, ISP_LOGERR, 4602 "msg not COMMAND COMPLETE after status %d.%d.%d", 4603 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4604 break; 4605 4606 case RQCS_NO_MESSAGE_OUT: 4607 isp_prt(isp, ISP_LOGERR, 4608 "No MESSAGE OUT phase after selection on %d.%d.%d", 4609 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4610 break; 4611 4612 case RQCS_EXT_ID_FAILED: 4613 isp_prt(isp, ISP_LOGERR, "EXTENDED IDENTIFY failed %d.%d.%d", 4614 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4615 break; 4616 4617 case RQCS_IDE_MSG_FAILED: 4618 isp_prt(isp, ISP_LOGERR, 4619 "INITIATOR DETECTED ERROR rejected by %d.%d.%d", 4620 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4621 break; 4622 4623 case RQCS_ABORT_MSG_FAILED: 4624 isp_prt(isp, ISP_LOGERR, "ABORT OPERATION rejected by %d.%d.%d", 4625 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4626 break; 4627 4628 case RQCS_REJECT_MSG_FAILED: 4629 isp_prt(isp, ISP_LOGERR, "MESSAGE REJECT rejected by %d.%d.%d", 4630 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4631 break; 4632 4633 case RQCS_NOP_MSG_FAILED: 4634 isp_prt(isp, ISP_LOGERR, "NOP rejected by %d.%d.%d", 4635 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4636 break; 4637 4638 case RQCS_PARITY_ERROR_MSG_FAILED: 4639 isp_prt(isp, ISP_LOGERR, 4640 "MESSAGE PARITY ERROR rejected by %d.%d.%d", 4641 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4642 break; 4643 4644 case RQCS_DEVICE_RESET_MSG_FAILED: 4645 isp_prt(isp, ISP_LOGWARN, 4646 "BUS DEVICE RESET rejected by %d.%d.%d", 4647 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4648 break; 4649 4650 case RQCS_ID_MSG_FAILED: 4651 isp_prt(isp, ISP_LOGERR, "IDENTIFY rejected by %d.%d.%d", 4652 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4653 break; 4654 4655 case RQCS_UNEXP_BUS_FREE: 4656 isp_prt(isp, ISP_LOGERR, "%d.%d.%d had an unexpected bus free", 4657 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4658 break; 4659 4660 case RQCS_DATA_UNDERRUN: 4661 { 4662 if (IS_FC(isp)) { 4663 int ru_marked = (sp->req_scsi_status & RQCS_RU) != 0; 4664 if (!ru_marked || sp->req_resid > XS_XFRLEN(xs)) { 4665 isp_prt(isp, ISP_LOGWARN, bun, XS_TGT(xs), 4666 XS_LUN(xs), XS_XFRLEN(xs), sp->req_resid, 4667 (ru_marked)? "marked" : "not marked"); 4668 if (XS_NOERR(xs)) { 4669 XS_SETERR(xs, HBA_BOTCH); 4670 } 4671 return; 4672 } 4673 } 4674 XS_RESID(xs) = sp->req_resid; 4675 if (XS_NOERR(xs)) { 4676 XS_SETERR(xs, HBA_NOERROR); 4677 } 4678 return; 4679 } 4680 4681 case RQCS_XACT_ERR1: 4682 isp_prt(isp, ISP_LOGERR, xact1, XS_CHANNEL(xs), 4683 XS_TGT(xs), XS_LUN(xs)); 4684 break; 4685 4686 case RQCS_XACT_ERR2: 4687 isp_prt(isp, ISP_LOGERR, xact2, 4688 XS_LUN(xs), XS_TGT(xs), XS_CHANNEL(xs)); 4689 break; 4690 4691 case RQCS_XACT_ERR3: 4692 isp_prt(isp, ISP_LOGERR, xact3, 4693 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4694 break; 4695 4696 case RQCS_BAD_ENTRY: 4697 isp_prt(isp, ISP_LOGERR, "Invalid IOCB entry type detected"); 4698 break; 4699 4700 case RQCS_QUEUE_FULL: 4701 isp_prt(isp, ISP_LOGDEBUG0, 4702 "internal queues full for %d.%d.%d status 0x%x", 4703 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs), *XS_STSP(xs)); 4704 4705 /* 4706 * If QFULL or some other status byte is set, then this 4707 * isn't an error, per se. 4708 * 4709 * Unfortunately, some QLogic f/w writers have, in 4710 * some cases, ommitted to *set* status to QFULL. 4711 * 4712 4713 if (*XS_STSP(xs) != SCSI_GOOD && XS_NOERR(xs)) { 4714 XS_SETERR(xs, HBA_NOERROR); 4715 return; 4716 } 4717 4718 * 4719 * 4720 */ 4721 4722 *XS_STSP(xs) = SCSI_QFULL; 4723 XS_SETERR(xs, HBA_NOERROR); 4724 return; 4725 4726 case RQCS_PHASE_SKIPPED: 4727 isp_prt(isp, ISP_LOGERR, pskip, XS_CHANNEL(xs), 4728 XS_TGT(xs), XS_LUN(xs)); 4729 break; 4730 4731 case RQCS_ARQS_FAILED: 4732 isp_prt(isp, ISP_LOGERR, 4733 "Auto Request Sense failed for %d.%d.%d", 4734 XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)); 4735 if (XS_NOERR(xs)) { 4736 XS_SETERR(xs, HBA_ARQFAIL); 4737 } 4738 return; 4739 4740 case RQCS_WIDE_FAILED: 4741 isp_prt(isp, ISP_LOGERR, 4742 "Wide Negotiation failed for %d.%d.%d", 4743 XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs)); 4744 if (IS_SCSI(isp)) { 4745 sdparam *sdp = isp->isp_param; 4746 sdp += XS_CHANNEL(xs); 4747 sdp->isp_devparam[XS_TGT(xs)].goal_flags &= ~DPARM_WIDE; 4748 sdp->isp_devparam[XS_TGT(xs)].dev_update = 1; 4749 isp->isp_update |= (1 << XS_CHANNEL(xs)); 4750 } 4751 if (XS_NOERR(xs)) { 4752 XS_SETERR(xs, HBA_NOERROR); 4753 } 4754 return; 4755 4756 case RQCS_SYNCXFER_FAILED: 4757 isp_prt(isp, ISP_LOGERR, 4758 "SDTR Message failed for target %d.%d.%d", 4759 XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs)); 4760 if (IS_SCSI(isp)) { 4761 sdparam *sdp = isp->isp_param; 4762 sdp += XS_CHANNEL(xs); 4763 sdp->isp_devparam[XS_TGT(xs)].goal_flags &= ~DPARM_SYNC; 4764 sdp->isp_devparam[XS_TGT(xs)].dev_update = 1; 4765 isp->isp_update |= (1 << XS_CHANNEL(xs)); 4766 } 4767 break; 4768 4769 case RQCS_LVD_BUSERR: 4770 isp_prt(isp, ISP_LOGERR, 4771 "Bad LVD condition while talking to %d.%d.%d", 4772 XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs)); 4773 break; 4774 4775 case RQCS_PORT_UNAVAILABLE: 4776 /* 4777 * No such port on the loop. Moral equivalent of SELTIMEO 4778 */ 4779 case RQCS_PORT_LOGGED_OUT: 4780 /* 4781 * It was there (maybe)- treat as a selection timeout. 4782 */ 4783 if ((sp->req_completion_status & 0xff) == RQCS_PORT_UNAVAILABLE) 4784 isp_prt(isp, ISP_LOGINFO, 4785 "port unavailable for target %d", XS_TGT(xs)); 4786 else 4787 isp_prt(isp, ISP_LOGINFO, 4788 "port logout for target %d", XS_TGT(xs)); 4789 /* 4790 * If we're on a local loop, force a LIP (which is overkill) 4791 * to force a re-login of this unit. If we're on fabric, 4792 * then we'll have to relogin as a matter of course. 4793 */ 4794 if (FCPARAM(isp)->isp_topo == TOPO_NL_PORT || 4795 FCPARAM(isp)->isp_topo == TOPO_FL_PORT) { 4796 mbreg_t mbs; 4797 MEMZERO(&mbs, sizeof (mbs)); 4798 mbs.param[0] = MBOX_INIT_LIP; 4799 isp_mboxcmd_qnw(isp, &mbs, 1); 4800 } 4801 4802 /* 4803 * Probably overkill. 4804 */ 4805 isp->isp_sendmarker = 1; 4806 FCPARAM(isp)->isp_loopstate = LOOP_PDB_RCVD; 4807 isp_mark_getpdb_all(isp); 4808 isp_async(isp, ISPASYNC_CHANGE_NOTIFY, ISPASYNC_CHANGE_OTHER); 4809 if (XS_NOERR(xs)) { 4810 XS_SETERR(xs, HBA_SELTIMEOUT); 4811 } 4812 return; 4813 4814 case RQCS_PORT_CHANGED: 4815 isp_prt(isp, ISP_LOGWARN, 4816 "port changed for target %d", XS_TGT(xs)); 4817 if (XS_NOERR(xs)) { 4818 XS_SETERR(xs, HBA_SELTIMEOUT); 4819 } 4820 return; 4821 4822 case RQCS_PORT_BUSY: 4823 isp_prt(isp, ISP_LOGWARN, 4824 "port busy for target %d", XS_TGT(xs)); 4825 if (XS_NOERR(xs)) { 4826 XS_SETERR(xs, HBA_TGTBSY); 4827 } 4828 return; 4829 4830 default: 4831 isp_prt(isp, ISP_LOGERR, "Unknown Completion Status 0x%x", 4832 sp->req_completion_status); 4833 break; 4834 } 4835 if (XS_NOERR(xs)) { 4836 XS_SETERR(xs, HBA_BOTCH); 4837 } 4838} 4839 4840static void 4841isp_fastpost_complete(struct ispsoftc *isp, u_int16_t fph) 4842{ 4843 XS_T *xs; 4844 4845 if (fph == 0) { 4846 return; 4847 } 4848 xs = isp_find_xs(isp, fph); 4849 if (xs == NULL) { 4850 isp_prt(isp, ISP_LOGWARN, 4851 "Command for fast post handle 0x%x not found", fph); 4852 return; 4853 } 4854 isp_destroy_handle(isp, fph); 4855 4856 /* 4857 * Since we don't have a result queue entry item, 4858 * we must believe that SCSI status is zero and 4859 * that all data transferred. 4860 */ 4861 XS_SET_STATE_STAT(isp, xs, NULL); 4862 XS_RESID(xs) = 0; 4863 *XS_STSP(xs) = SCSI_GOOD; 4864 if (XS_XFRLEN(xs)) { 4865 ISP_DMAFREE(isp, xs, fph); 4866 } 4867 if (isp->isp_nactive) 4868 isp->isp_nactive--; 4869 isp->isp_fphccmplt++; 4870 isp_done(xs); 4871} 4872 4873static int 4874isp_mbox_continue(struct ispsoftc *isp) 4875{ 4876 mbreg_t mbs; 4877 u_int16_t *ptr; 4878 4879 switch (isp->isp_lastmbxcmd) { 4880 case MBOX_WRITE_RAM_WORD: 4881 case MBOX_READ_RAM_WORD: 4882 case MBOX_READ_RAM_WORD_EXTENDED: 4883 break; 4884 default: 4885 return (1); 4886 } 4887 if (isp->isp_mboxtmp[0] != MBOX_COMMAND_COMPLETE) { 4888 isp->isp_mbxwrk0 = 0; 4889 return (-1); 4890 } 4891 4892 /* 4893 * Clear the previous interrupt. 4894 */ 4895 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 4896 ISP_WRITE(isp, BIU_SEMA, 0); 4897 4898 /* 4899 * Continue with next word. 4900 */ 4901 MEMZERO(&mbs, sizeof (mbs)); 4902 ptr = isp->isp_mbxworkp; 4903 switch (isp->isp_lastmbxcmd) { 4904 case MBOX_WRITE_RAM_WORD: 4905 mbs.param[2] = *ptr++; 4906 mbs.param[1] = isp->isp_mbxwrk1++; 4907 break; 4908 case MBOX_READ_RAM_WORD: 4909 case MBOX_READ_RAM_WORD_EXTENDED: 4910 *ptr++ = isp->isp_mboxtmp[2]; 4911 mbs.param[1] = isp->isp_mbxwrk1++; 4912 break; 4913 } 4914 isp->isp_mbxworkp = ptr; 4915 mbs.param[0] = isp->isp_lastmbxcmd; 4916 isp->isp_mbxwrk0 -= 1; 4917 isp_mboxcmd_qnw(isp, &mbs, 0); 4918 return (0); 4919} 4920 4921 4922#define HIWRD(x) ((x) >> 16) 4923#define LOWRD(x) ((x) & 0xffff) 4924#define ISPOPMAP(a, b) (((a) << 16) | (b)) 4925static const u_int32_t mbpscsi[] = { 4926 ISPOPMAP(0x01, 0x01), /* 0x00: MBOX_NO_OP */ 4927 ISPOPMAP(0x1f, 0x01), /* 0x01: MBOX_LOAD_RAM */ 4928 ISPOPMAP(0x03, 0x01), /* 0x02: MBOX_EXEC_FIRMWARE */ 4929 ISPOPMAP(0x1f, 0x01), /* 0x03: MBOX_DUMP_RAM */ 4930 ISPOPMAP(0x07, 0x07), /* 0x04: MBOX_WRITE_RAM_WORD */ 4931 ISPOPMAP(0x03, 0x07), /* 0x05: MBOX_READ_RAM_WORD */ 4932 ISPOPMAP(0x3f, 0x3f), /* 0x06: MBOX_MAILBOX_REG_TEST */ 4933 ISPOPMAP(0x03, 0x07), /* 0x07: MBOX_VERIFY_CHECKSUM */ 4934 ISPOPMAP(0x01, 0x0f), /* 0x08: MBOX_ABOUT_FIRMWARE */ 4935 ISPOPMAP(0x00, 0x00), /* 0x09: */ 4936 ISPOPMAP(0x00, 0x00), /* 0x0a: */ 4937 ISPOPMAP(0x00, 0x00), /* 0x0b: */ 4938 ISPOPMAP(0x00, 0x00), /* 0x0c: */ 4939 ISPOPMAP(0x00, 0x00), /* 0x0d: */ 4940 ISPOPMAP(0x01, 0x05), /* 0x0e: MBOX_CHECK_FIRMWARE */ 4941 ISPOPMAP(0x00, 0x00), /* 0x0f: */ 4942 ISPOPMAP(0x1f, 0x1f), /* 0x10: MBOX_INIT_REQ_QUEUE */ 4943 ISPOPMAP(0x3f, 0x3f), /* 0x11: MBOX_INIT_RES_QUEUE */ 4944 ISPOPMAP(0x0f, 0x0f), /* 0x12: MBOX_EXECUTE_IOCB */ 4945 ISPOPMAP(0x03, 0x03), /* 0x13: MBOX_WAKE_UP */ 4946 ISPOPMAP(0x01, 0x3f), /* 0x14: MBOX_STOP_FIRMWARE */ 4947 ISPOPMAP(0x0f, 0x0f), /* 0x15: MBOX_ABORT */ 4948 ISPOPMAP(0x03, 0x03), /* 0x16: MBOX_ABORT_DEVICE */ 4949 ISPOPMAP(0x07, 0x07), /* 0x17: MBOX_ABORT_TARGET */ 4950 ISPOPMAP(0x07, 0x07), /* 0x18: MBOX_BUS_RESET */ 4951 ISPOPMAP(0x03, 0x07), /* 0x19: MBOX_STOP_QUEUE */ 4952 ISPOPMAP(0x03, 0x07), /* 0x1a: MBOX_START_QUEUE */ 4953 ISPOPMAP(0x03, 0x07), /* 0x1b: MBOX_SINGLE_STEP_QUEUE */ 4954 ISPOPMAP(0x03, 0x07), /* 0x1c: MBOX_ABORT_QUEUE */ 4955 ISPOPMAP(0x03, 0x4f), /* 0x1d: MBOX_GET_DEV_QUEUE_STATUS */ 4956 ISPOPMAP(0x00, 0x00), /* 0x1e: */ 4957 ISPOPMAP(0x01, 0x07), /* 0x1f: MBOX_GET_FIRMWARE_STATUS */ 4958 ISPOPMAP(0x01, 0x07), /* 0x20: MBOX_GET_INIT_SCSI_ID */ 4959 ISPOPMAP(0x01, 0x07), /* 0x21: MBOX_GET_SELECT_TIMEOUT */ 4960 ISPOPMAP(0x01, 0xc7), /* 0x22: MBOX_GET_RETRY_COUNT */ 4961 ISPOPMAP(0x01, 0x07), /* 0x23: MBOX_GET_TAG_AGE_LIMIT */ 4962 ISPOPMAP(0x01, 0x03), /* 0x24: MBOX_GET_CLOCK_RATE */ 4963 ISPOPMAP(0x01, 0x07), /* 0x25: MBOX_GET_ACT_NEG_STATE */ 4964 ISPOPMAP(0x01, 0x07), /* 0x26: MBOX_GET_ASYNC_DATA_SETUP_TIME */ 4965 ISPOPMAP(0x01, 0x07), /* 0x27: MBOX_GET_PCI_PARAMS */ 4966 ISPOPMAP(0x03, 0x4f), /* 0x28: MBOX_GET_TARGET_PARAMS */ 4967 ISPOPMAP(0x03, 0x0f), /* 0x29: MBOX_GET_DEV_QUEUE_PARAMS */ 4968 ISPOPMAP(0x01, 0x07), /* 0x2a: MBOX_GET_RESET_DELAY_PARAMS */ 4969 ISPOPMAP(0x00, 0x00), /* 0x2b: */ 4970 ISPOPMAP(0x00, 0x00), /* 0x2c: */ 4971 ISPOPMAP(0x00, 0x00), /* 0x2d: */ 4972 ISPOPMAP(0x00, 0x00), /* 0x2e: */ 4973 ISPOPMAP(0x00, 0x00), /* 0x2f: */ 4974 ISPOPMAP(0x03, 0x03), /* 0x30: MBOX_SET_INIT_SCSI_ID */ 4975 ISPOPMAP(0x07, 0x07), /* 0x31: MBOX_SET_SELECT_TIMEOUT */ 4976 ISPOPMAP(0xc7, 0xc7), /* 0x32: MBOX_SET_RETRY_COUNT */ 4977 ISPOPMAP(0x07, 0x07), /* 0x33: MBOX_SET_TAG_AGE_LIMIT */ 4978 ISPOPMAP(0x03, 0x03), /* 0x34: MBOX_SET_CLOCK_RATE */ 4979 ISPOPMAP(0x07, 0x07), /* 0x35: MBOX_SET_ACT_NEG_STATE */ 4980 ISPOPMAP(0x07, 0x07), /* 0x36: MBOX_SET_ASYNC_DATA_SETUP_TIME */ 4981 ISPOPMAP(0x07, 0x07), /* 0x37: MBOX_SET_PCI_CONTROL_PARAMS */ 4982 ISPOPMAP(0x4f, 0x4f), /* 0x38: MBOX_SET_TARGET_PARAMS */ 4983 ISPOPMAP(0x0f, 0x0f), /* 0x39: MBOX_SET_DEV_QUEUE_PARAMS */ 4984 ISPOPMAP(0x07, 0x07), /* 0x3a: MBOX_SET_RESET_DELAY_PARAMS */ 4985 ISPOPMAP(0x00, 0x00), /* 0x3b: */ 4986 ISPOPMAP(0x00, 0x00), /* 0x3c: */ 4987 ISPOPMAP(0x00, 0x00), /* 0x3d: */ 4988 ISPOPMAP(0x00, 0x00), /* 0x3e: */ 4989 ISPOPMAP(0x00, 0x00), /* 0x3f: */ 4990 ISPOPMAP(0x01, 0x03), /* 0x40: MBOX_RETURN_BIOS_BLOCK_ADDR */ 4991 ISPOPMAP(0x3f, 0x01), /* 0x41: MBOX_WRITE_FOUR_RAM_WORDS */ 4992 ISPOPMAP(0x03, 0x07), /* 0x42: MBOX_EXEC_BIOS_IOCB */ 4993 ISPOPMAP(0x00, 0x00), /* 0x43: */ 4994 ISPOPMAP(0x00, 0x00), /* 0x44: */ 4995 ISPOPMAP(0x03, 0x03), /* 0x45: SET SYSTEM PARAMETER */ 4996 ISPOPMAP(0x01, 0x03), /* 0x46: GET SYSTEM PARAMETER */ 4997 ISPOPMAP(0x00, 0x00), /* 0x47: */ 4998 ISPOPMAP(0x01, 0xcf), /* 0x48: GET SCAM CONFIGURATION */ 4999 ISPOPMAP(0xcf, 0xcf), /* 0x49: SET SCAM CONFIGURATION */ 5000 ISPOPMAP(0x03, 0x03), /* 0x4a: MBOX_SET_FIRMWARE_FEATURES */ 5001 ISPOPMAP(0x01, 0x03), /* 0x4b: MBOX_GET_FIRMWARE_FEATURES */ 5002 ISPOPMAP(0x00, 0x00), /* 0x4c: */ 5003 ISPOPMAP(0x00, 0x00), /* 0x4d: */ 5004 ISPOPMAP(0x00, 0x00), /* 0x4e: */ 5005 ISPOPMAP(0x00, 0x00), /* 0x4f: */ 5006 ISPOPMAP(0xdf, 0xdf), /* 0x50: LOAD RAM A64 */ 5007 ISPOPMAP(0xdf, 0xdf), /* 0x51: DUMP RAM A64 */ 5008 ISPOPMAP(0xdf, 0xff), /* 0x52: INITIALIZE REQUEST QUEUE A64 */ 5009 ISPOPMAP(0xef, 0xff), /* 0x53: INITIALIZE RESPONSE QUEUE A64 */ 5010 ISPOPMAP(0xcf, 0x01), /* 0x54: EXECUTE IOCB A64 */ 5011 ISPOPMAP(0x07, 0x01), /* 0x55: ENABLE TARGET MODE */ 5012 ISPOPMAP(0x03, 0x0f), /* 0x56: GET TARGET STATUS */ 5013 ISPOPMAP(0x00, 0x00), /* 0x57: */ 5014 ISPOPMAP(0x00, 0x00), /* 0x58: */ 5015 ISPOPMAP(0x00, 0x00), /* 0x59: */ 5016 ISPOPMAP(0x03, 0x03), /* 0x5a: SET DATA OVERRUN RECOVERY MODE */ 5017 ISPOPMAP(0x01, 0x03), /* 0x5b: GET DATA OVERRUN RECOVERY MODE */ 5018 ISPOPMAP(0x0f, 0x0f), /* 0x5c: SET HOST DATA */ 5019 ISPOPMAP(0x01, 0x01) /* 0x5d: GET NOST DATA */ 5020}; 5021 5022#ifndef ISP_STRIPPED 5023static char *scsi_mbcmd_names[] = { 5024 "NO-OP", 5025 "LOAD RAM", 5026 "EXEC FIRMWARE", 5027 "DUMP RAM", 5028 "WRITE RAM WORD", 5029 "READ RAM WORD", 5030 "MAILBOX REG TEST", 5031 "VERIFY CHECKSUM", 5032 "ABOUT FIRMWARE", 5033 NULL, 5034 NULL, 5035 NULL, 5036 NULL, 5037 NULL, 5038 "CHECK FIRMWARE", 5039 NULL, 5040 "INIT REQUEST QUEUE", 5041 "INIT RESULT QUEUE", 5042 "EXECUTE IOCB", 5043 "WAKE UP", 5044 "STOP FIRMWARE", 5045 "ABORT", 5046 "ABORT DEVICE", 5047 "ABORT TARGET", 5048 "BUS RESET", 5049 "STOP QUEUE", 5050 "START QUEUE", 5051 "SINGLE STEP QUEUE", 5052 "ABORT QUEUE", 5053 "GET DEV QUEUE STATUS", 5054 NULL, 5055 "GET FIRMWARE STATUS", 5056 "GET INIT SCSI ID", 5057 "GET SELECT TIMEOUT", 5058 "GET RETRY COUNT", 5059 "GET TAG AGE LIMIT", 5060 "GET CLOCK RATE", 5061 "GET ACT NEG STATE", 5062 "GET ASYNC DATA SETUP TIME", 5063 "GET PCI PARAMS", 5064 "GET TARGET PARAMS", 5065 "GET DEV QUEUE PARAMS", 5066 "GET RESET DELAY PARAMS", 5067 NULL, 5068 NULL, 5069 NULL, 5070 NULL, 5071 NULL, 5072 "SET INIT SCSI ID", 5073 "SET SELECT TIMEOUT", 5074 "SET RETRY COUNT", 5075 "SET TAG AGE LIMIT", 5076 "SET CLOCK RATE", 5077 "SET ACT NEG STATE", 5078 "SET ASYNC DATA SETUP TIME", 5079 "SET PCI CONTROL PARAMS", 5080 "SET TARGET PARAMS", 5081 "SET DEV QUEUE PARAMS", 5082 "SET RESET DELAY PARAMS", 5083 NULL, 5084 NULL, 5085 NULL, 5086 NULL, 5087 NULL, 5088 "RETURN BIOS BLOCK ADDR", 5089 "WRITE FOUR RAM WORDS", 5090 "EXEC BIOS IOCB", 5091 NULL, 5092 NULL, 5093 "SET SYSTEM PARAMETER", 5094 "GET SYSTEM PARAMETER", 5095 NULL, 5096 "GET SCAM CONFIGURATION", 5097 "SET SCAM CONFIGURATION", 5098 "SET FIRMWARE FEATURES", 5099 "GET FIRMWARE FEATURES", 5100 NULL, 5101 NULL, 5102 NULL, 5103 NULL, 5104 "LOAD RAM A64", 5105 "DUMP RAM A64", 5106 "INITIALIZE REQUEST QUEUE A64", 5107 "INITIALIZE RESPONSE QUEUE A64", 5108 "EXECUTE IOCB A64", 5109 "ENABLE TARGET MODE", 5110 "GET TARGET MODE STATE", 5111 NULL, 5112 NULL, 5113 NULL, 5114 "SET DATA OVERRUN RECOVERY MODE", 5115 "GET DATA OVERRUN RECOVERY MODE", 5116 "SET HOST DATA", 5117 "GET NOST DATA", 5118}; 5119#endif 5120 5121static const u_int32_t mbpfc[] = { 5122 ISPOPMAP(0x01, 0x01), /* 0x00: MBOX_NO_OP */ 5123 ISPOPMAP(0x1f, 0x01), /* 0x01: MBOX_LOAD_RAM */ 5124 ISPOPMAP(0x03, 0x01), /* 0x02: MBOX_EXEC_FIRMWARE */ 5125 ISPOPMAP(0xdf, 0x01), /* 0x03: MBOX_DUMP_RAM */ 5126 ISPOPMAP(0x07, 0x07), /* 0x04: MBOX_WRITE_RAM_WORD */ 5127 ISPOPMAP(0x03, 0x07), /* 0x05: MBOX_READ_RAM_WORD */ 5128 ISPOPMAP(0xff, 0xff), /* 0x06: MBOX_MAILBOX_REG_TEST */ 5129 ISPOPMAP(0x03, 0x05), /* 0x07: MBOX_VERIFY_CHECKSUM */ 5130 ISPOPMAP(0x01, 0x4f), /* 0x08: MBOX_ABOUT_FIRMWARE */ 5131 ISPOPMAP(0xdf, 0x01), /* 0x09: LOAD RAM */ 5132 ISPOPMAP(0xdf, 0x01), /* 0x0a: DUMP RAM */ 5133 ISPOPMAP(0x00, 0x00), /* 0x0b: */ 5134 ISPOPMAP(0x00, 0x00), /* 0x0c: */ 5135 ISPOPMAP(0x00, 0x00), /* 0x0d: */ 5136 ISPOPMAP(0x01, 0x05), /* 0x0e: MBOX_CHECK_FIRMWARE */ 5137 ISPOPMAP(0x03, 0x07), /* 0x0f: MBOX_READ_RAM_WORD_EXTENDED(1) */ 5138 ISPOPMAP(0x1f, 0x11), /* 0x10: MBOX_INIT_REQ_QUEUE */ 5139 ISPOPMAP(0x2f, 0x21), /* 0x11: MBOX_INIT_RES_QUEUE */ 5140 ISPOPMAP(0x0f, 0x01), /* 0x12: MBOX_EXECUTE_IOCB */ 5141 ISPOPMAP(0x03, 0x03), /* 0x13: MBOX_WAKE_UP */ 5142 ISPOPMAP(0x01, 0xff), /* 0x14: MBOX_STOP_FIRMWARE */ 5143 ISPOPMAP(0x4f, 0x01), /* 0x15: MBOX_ABORT */ 5144 ISPOPMAP(0x07, 0x01), /* 0x16: MBOX_ABORT_DEVICE */ 5145 ISPOPMAP(0x07, 0x01), /* 0x17: MBOX_ABORT_TARGET */ 5146 ISPOPMAP(0x03, 0x03), /* 0x18: MBOX_BUS_RESET */ 5147 ISPOPMAP(0x07, 0x05), /* 0x19: MBOX_STOP_QUEUE */ 5148 ISPOPMAP(0x07, 0x05), /* 0x1a: MBOX_START_QUEUE */ 5149 ISPOPMAP(0x07, 0x05), /* 0x1b: MBOX_SINGLE_STEP_QUEUE */ 5150 ISPOPMAP(0x07, 0x05), /* 0x1c: MBOX_ABORT_QUEUE */ 5151 ISPOPMAP(0x07, 0x03), /* 0x1d: MBOX_GET_DEV_QUEUE_STATUS */ 5152 ISPOPMAP(0x00, 0x00), /* 0x1e: */ 5153 ISPOPMAP(0x01, 0x07), /* 0x1f: MBOX_GET_FIRMWARE_STATUS */ 5154 ISPOPMAP(0x01, 0x4f), /* 0x20: MBOX_GET_LOOP_ID */ 5155 ISPOPMAP(0x00, 0x00), /* 0x21: */ 5156 ISPOPMAP(0x01, 0x07), /* 0x22: MBOX_GET_RETRY_COUNT */ 5157 ISPOPMAP(0x00, 0x00), /* 0x23: */ 5158 ISPOPMAP(0x00, 0x00), /* 0x24: */ 5159 ISPOPMAP(0x00, 0x00), /* 0x25: */ 5160 ISPOPMAP(0x00, 0x00), /* 0x26: */ 5161 ISPOPMAP(0x00, 0x00), /* 0x27: */ 5162 ISPOPMAP(0x01, 0x03), /* 0x28: MBOX_GET_FIRMWARE_OPTIONS */ 5163 ISPOPMAP(0x03, 0x07), /* 0x29: MBOX_GET_PORT_QUEUE_PARAMS */ 5164 ISPOPMAP(0x00, 0x00), /* 0x2a: */ 5165 ISPOPMAP(0x00, 0x00), /* 0x2b: */ 5166 ISPOPMAP(0x00, 0x00), /* 0x2c: */ 5167 ISPOPMAP(0x00, 0x00), /* 0x2d: */ 5168 ISPOPMAP(0x00, 0x00), /* 0x2e: */ 5169 ISPOPMAP(0x00, 0x00), /* 0x2f: */ 5170 ISPOPMAP(0x00, 0x00), /* 0x30: */ 5171 ISPOPMAP(0x00, 0x00), /* 0x31: */ 5172 ISPOPMAP(0x07, 0x07), /* 0x32: MBOX_SET_RETRY_COUNT */ 5173 ISPOPMAP(0x00, 0x00), /* 0x33: */ 5174 ISPOPMAP(0x00, 0x00), /* 0x34: */ 5175 ISPOPMAP(0x00, 0x00), /* 0x35: */ 5176 ISPOPMAP(0x00, 0x00), /* 0x36: */ 5177 ISPOPMAP(0x00, 0x00), /* 0x37: */ 5178 ISPOPMAP(0x0f, 0x01), /* 0x38: MBOX_SET_FIRMWARE_OPTIONS */ 5179 ISPOPMAP(0x0f, 0x07), /* 0x39: MBOX_SET_PORT_QUEUE_PARAMS */ 5180 ISPOPMAP(0x00, 0x00), /* 0x3a: */ 5181 ISPOPMAP(0x00, 0x00), /* 0x3b: */ 5182 ISPOPMAP(0x00, 0x00), /* 0x3c: */ 5183 ISPOPMAP(0x00, 0x00), /* 0x3d: */ 5184 ISPOPMAP(0x00, 0x00), /* 0x3e: */ 5185 ISPOPMAP(0x00, 0x00), /* 0x3f: */ 5186 ISPOPMAP(0x03, 0x01), /* 0x40: MBOX_LOOP_PORT_BYPASS */ 5187 ISPOPMAP(0x03, 0x01), /* 0x41: MBOX_LOOP_PORT_ENABLE */ 5188 ISPOPMAP(0x03, 0x07), /* 0x42: MBOX_GET_RESOURCE_COUNTS */ 5189 ISPOPMAP(0x01, 0x01), /* 0x43: MBOX_REQUEST_NON_PARTICIPATING_MODE */ 5190 ISPOPMAP(0x00, 0x00), /* 0x44: */ 5191 ISPOPMAP(0x00, 0x00), /* 0x45: */ 5192 ISPOPMAP(0x00, 0x00), /* 0x46: */ 5193 ISPOPMAP(0xcf, 0x03), /* 0x47: GET PORT_DATABASE ENHANCED */ 5194 ISPOPMAP(0x00, 0x00), /* 0x48: */ 5195 ISPOPMAP(0x00, 0x00), /* 0x49: */ 5196 ISPOPMAP(0x00, 0x00), /* 0x4a: */ 5197 ISPOPMAP(0x00, 0x00), /* 0x4b: */ 5198 ISPOPMAP(0x00, 0x00), /* 0x4c: */ 5199 ISPOPMAP(0x00, 0x00), /* 0x4d: */ 5200 ISPOPMAP(0x00, 0x00), /* 0x4e: */ 5201 ISPOPMAP(0x00, 0x00), /* 0x4f: */ 5202 ISPOPMAP(0x00, 0x00), /* 0x50: */ 5203 ISPOPMAP(0x00, 0x00), /* 0x51: */ 5204 ISPOPMAP(0x00, 0x00), /* 0x52: */ 5205 ISPOPMAP(0x00, 0x00), /* 0x53: */ 5206 ISPOPMAP(0xcf, 0x01), /* 0x54: EXECUTE IOCB A64 */ 5207 ISPOPMAP(0x00, 0x00), /* 0x55: */ 5208 ISPOPMAP(0x00, 0x00), /* 0x56: */ 5209 ISPOPMAP(0x00, 0x00), /* 0x57: */ 5210 ISPOPMAP(0x00, 0x00), /* 0x58: */ 5211 ISPOPMAP(0x00, 0x00), /* 0x59: */ 5212 ISPOPMAP(0x00, 0x00), /* 0x5a: */ 5213 ISPOPMAP(0x03, 0x01), /* 0x5b: MBOX_DRIVER_HEARTBEAT */ 5214 ISPOPMAP(0xcf, 0x01), /* 0x5c: MBOX_FW_HEARTBEAT */ 5215 ISPOPMAP(0x07, 0x03), /* 0x5d: MBOX_GET_SET_DATA_RATE */ 5216 ISPOPMAP(0x00, 0x00), /* 0x5e: */ 5217 ISPOPMAP(0x00, 0x00), /* 0x5f: */ 5218 ISPOPMAP(0xfd, 0x31), /* 0x60: MBOX_INIT_FIRMWARE */ 5219 ISPOPMAP(0x00, 0x00), /* 0x61: */ 5220 ISPOPMAP(0x01, 0x01), /* 0x62: MBOX_INIT_LIP */ 5221 ISPOPMAP(0xcd, 0x03), /* 0x63: MBOX_GET_FC_AL_POSITION_MAP */ 5222 ISPOPMAP(0xcf, 0x01), /* 0x64: MBOX_GET_PORT_DB */ 5223 ISPOPMAP(0x07, 0x01), /* 0x65: MBOX_CLEAR_ACA */ 5224 ISPOPMAP(0x07, 0x01), /* 0x66: MBOX_TARGET_RESET */ 5225 ISPOPMAP(0x07, 0x01), /* 0x67: MBOX_CLEAR_TASK_SET */ 5226 ISPOPMAP(0x07, 0x01), /* 0x68: MBOX_ABORT_TASK_SET */ 5227 ISPOPMAP(0x01, 0x07), /* 0x69: MBOX_GET_FW_STATE */ 5228 ISPOPMAP(0x03, 0xcf), /* 0x6a: MBOX_GET_PORT_NAME */ 5229 ISPOPMAP(0xcf, 0x01), /* 0x6b: MBOX_GET_LINK_STATUS */ 5230 ISPOPMAP(0x0f, 0x01), /* 0x6c: MBOX_INIT_LIP_RESET */ 5231 ISPOPMAP(0x00, 0x00), /* 0x6d: */ 5232 ISPOPMAP(0xcf, 0x03), /* 0x6e: MBOX_SEND_SNS */ 5233 ISPOPMAP(0x0f, 0x07), /* 0x6f: MBOX_FABRIC_LOGIN */ 5234 ISPOPMAP(0x03, 0x01), /* 0x70: MBOX_SEND_CHANGE_REQUEST */ 5235 ISPOPMAP(0x03, 0x03), /* 0x71: MBOX_FABRIC_LOGOUT */ 5236 ISPOPMAP(0x0f, 0x0f), /* 0x72: MBOX_INIT_LIP_LOGIN */ 5237 ISPOPMAP(0x00, 0x00), /* 0x73: */ 5238 ISPOPMAP(0x07, 0x01), /* 0x74: LOGIN LOOP PORT */ 5239 ISPOPMAP(0xcf, 0x03), /* 0x75: GET PORT/NODE NAME LIST */ 5240 ISPOPMAP(0x4f, 0x01), /* 0x76: SET VENDOR ID */ 5241 ISPOPMAP(0xcd, 0x01), /* 0x77: INITIALIZE IP MAILBOX */ 5242 ISPOPMAP(0x00, 0x00), /* 0x78: */ 5243 ISPOPMAP(0x00, 0x00), /* 0x79: */ 5244 ISPOPMAP(0x00, 0x00), /* 0x7a: */ 5245 ISPOPMAP(0x00, 0x00), /* 0x7b: */ 5246 ISPOPMAP(0x4f, 0x03), /* 0x7c: Get ID List */ 5247 ISPOPMAP(0xcf, 0x01), /* 0x7d: SEND LFA */ 5248 ISPOPMAP(0x0f, 0x01) /* 0x7e: LUN RESET */ 5249}; 5250/* 5251 * Footnotes 5252 * 5253 * (1): this sets bits 21..16 in mailbox register #8, which we nominally 5254 * do not access at this time in the core driver. The caller is 5255 * responsible for setting this register first (Gross!). 5256 */ 5257 5258#ifndef ISP_STRIPPED 5259static char *fc_mbcmd_names[] = { 5260 "NO-OP", 5261 "LOAD RAM", 5262 "EXEC FIRMWARE", 5263 "DUMP RAM", 5264 "WRITE RAM WORD", 5265 "READ RAM WORD", 5266 "MAILBOX REG TEST", 5267 "VERIFY CHECKSUM", 5268 "ABOUT FIRMWARE", 5269 "LOAD RAM", 5270 "DUMP RAM", 5271 NULL, 5272 NULL, 5273 "READ RAM WORD EXTENDED", 5274 "CHECK FIRMWARE", 5275 NULL, 5276 "INIT REQUEST QUEUE", 5277 "INIT RESULT QUEUE", 5278 "EXECUTE IOCB", 5279 "WAKE UP", 5280 "STOP FIRMWARE", 5281 "ABORT", 5282 "ABORT DEVICE", 5283 "ABORT TARGET", 5284 "BUS RESET", 5285 "STOP QUEUE", 5286 "START QUEUE", 5287 "SINGLE STEP QUEUE", 5288 "ABORT QUEUE", 5289 "GET DEV QUEUE STATUS", 5290 NULL, 5291 "GET FIRMWARE STATUS", 5292 "GET LOOP ID", 5293 NULL, 5294 "GET RETRY COUNT", 5295 NULL, 5296 NULL, 5297 NULL, 5298 NULL, 5299 NULL, 5300 "GET FIRMWARE OPTIONS", 5301 "GET PORT QUEUE PARAMS", 5302 NULL, 5303 NULL, 5304 NULL, 5305 NULL, 5306 NULL, 5307 NULL, 5308 NULL, 5309 NULL, 5310 "SET RETRY COUNT", 5311 NULL, 5312 NULL, 5313 NULL, 5314 NULL, 5315 NULL, 5316 "SET FIRMWARE OPTIONS", 5317 "SET PORT QUEUE PARAMS", 5318 NULL, 5319 NULL, 5320 NULL, 5321 NULL, 5322 NULL, 5323 NULL, 5324 "LOOP PORT BYPASS", 5325 "LOOP PORT ENABLE", 5326 "GET RESOURCE COUNTS", 5327 "REQUEST NON PARTICIPATING MODE", 5328 NULL, 5329 NULL, 5330 NULL, 5331 "GET PORT DATABASE,, ENHANCED", 5332 NULL, 5333 NULL, 5334 NULL, 5335 NULL, 5336 NULL, 5337 NULL, 5338 NULL, 5339 NULL, 5340 NULL, 5341 NULL, 5342 NULL, 5343 NULL, 5344 "EXECUTE IOCB A64", 5345 NULL, 5346 NULL, 5347 NULL, 5348 NULL, 5349 NULL, 5350 NULL, 5351 "DRIVER HEARTBEAT", 5352 NULL, 5353 "GET/SET DATA RATE", 5354 NULL, 5355 NULL, 5356 "INIT FIRMWARE", 5357 NULL, 5358 "INIT LIP", 5359 "GET FC-AL POSITION MAP", 5360 "GET PORT DATABASE", 5361 "CLEAR ACA", 5362 "TARGET RESET", 5363 "CLEAR TASK SET", 5364 "ABORT TASK SET", 5365 "GET FW STATE", 5366 "GET PORT NAME", 5367 "GET LINK STATUS", 5368 "INIT LIP RESET", 5369 NULL, 5370 "SEND SNS", 5371 "FABRIC LOGIN", 5372 "SEND CHANGE REQUEST", 5373 "FABRIC LOGOUT", 5374 "INIT LIP LOGIN", 5375 NULL, 5376 "LOGIN LOOP PORT", 5377 "GET PORT/NODE NAME LIST", 5378 "SET VENDOR ID", 5379 "INITIALIZE IP MAILBOX", 5380 NULL, 5381 NULL, 5382 NULL, 5383 NULL, 5384 "Get ID List", 5385 "SEND LFA", 5386 "Lun RESET" 5387}; 5388#endif 5389 5390static void 5391isp_mboxcmd_qnw(struct ispsoftc *isp, mbreg_t *mbp, int nodelay) 5392{ 5393 unsigned int ibits, obits, box, opcode; 5394 const u_int32_t *mcp; 5395 5396 if (IS_FC(isp)) { 5397 mcp = mbpfc; 5398 } else { 5399 mcp = mbpscsi; 5400 } 5401 opcode = mbp->param[0]; 5402 ibits = HIWRD(mcp[opcode]) & NMBOX_BMASK(isp); 5403 obits = LOWRD(mcp[opcode]) & NMBOX_BMASK(isp); 5404 ibits |= mbp->ibits; 5405 obits |= mbp->obits; 5406 for (box = 0; box < MAX_MAILBOX(isp); box++) { 5407 if (ibits & (1 << box)) { 5408 ISP_WRITE(isp, MBOX_OFF(box), mbp->param[box]); 5409 } 5410 if (nodelay == 0) { 5411 isp->isp_mboxtmp[box] = mbp->param[box] = 0; 5412 } 5413 } 5414 if (nodelay == 0) { 5415 isp->isp_lastmbxcmd = opcode; 5416 isp->isp_obits = obits; 5417 isp->isp_mboxbsy = 1; 5418 } 5419 ISP_WRITE(isp, HCCR, HCCR_CMD_SET_HOST_INT); 5420 /* 5421 * Oddly enough, if we're not delaying for an answer, 5422 * delay a bit to give the f/w a chance to pick up the 5423 * command. 5424 */ 5425 if (nodelay) { 5426 USEC_DELAY(1000); 5427 } 5428} 5429 5430static void 5431isp_mboxcmd(struct ispsoftc *isp, mbreg_t *mbp, int logmask) 5432{ 5433 char *cname, *xname, tname[16], mname[16]; 5434 unsigned int lim, ibits, obits, box, opcode; 5435 const u_int32_t *mcp; 5436 5437 if (IS_FC(isp)) { 5438 mcp = mbpfc; 5439 lim = (sizeof (mbpfc) / sizeof (mbpfc[0])); 5440 } else { 5441 mcp = mbpscsi; 5442 lim = (sizeof (mbpscsi) / sizeof (mbpscsi[0])); 5443 } 5444 5445 if ((opcode = mbp->param[0]) >= lim) { 5446 mbp->param[0] = MBOX_INVALID_COMMAND; 5447 isp_prt(isp, ISP_LOGERR, "Unknown Command 0x%x", opcode); 5448 return; 5449 } 5450 5451 ibits = HIWRD(mcp[opcode]) & NMBOX_BMASK(isp); 5452 obits = LOWRD(mcp[opcode]) & NMBOX_BMASK(isp); 5453 5454 ibits |= mbp->ibits; 5455 obits |= mbp->obits; 5456 5457 if (ibits == 0 && obits == 0) { 5458 mbp->param[0] = MBOX_COMMAND_PARAM_ERROR; 5459 isp_prt(isp, ISP_LOGERR, "no parameters for 0x%x", opcode); 5460 return; 5461 } 5462 5463 /* 5464 * Get exclusive usage of mailbox registers. 5465 */ 5466 MBOX_ACQUIRE(isp); 5467 5468 for (box = 0; box < MAX_MAILBOX(isp); box++) { 5469 if (ibits & (1 << box)) { 5470 ISP_WRITE(isp, MBOX_OFF(box), mbp->param[box]); 5471 } 5472 isp->isp_mboxtmp[box] = mbp->param[box] = 0; 5473 } 5474 5475 isp->isp_lastmbxcmd = opcode; 5476 5477 /* 5478 * We assume that we can't overwrite a previous command. 5479 */ 5480 isp->isp_obits = obits; 5481 isp->isp_mboxbsy = 1; 5482 5483 /* 5484 * Set Host Interrupt condition so that RISC will pick up mailbox regs. 5485 */ 5486 ISP_WRITE(isp, HCCR, HCCR_CMD_SET_HOST_INT); 5487 5488 /* 5489 * While we haven't finished the command, spin our wheels here. 5490 */ 5491 MBOX_WAIT_COMPLETE(isp); 5492 5493 if (isp->isp_mboxbsy) { 5494 /* 5495 * Command timed out. 5496 */ 5497 isp->isp_mboxbsy = 0; 5498 MBOX_RELEASE(isp); 5499 return; 5500 } 5501 5502 /* 5503 * Copy back output registers. 5504 */ 5505 for (box = 0; box < MAX_MAILBOX(isp); box++) { 5506 if (obits & (1 << box)) { 5507 mbp->param[box] = isp->isp_mboxtmp[box]; 5508 } 5509 } 5510 5511 MBOX_RELEASE(isp); 5512 5513 if (logmask == 0 || opcode == MBOX_EXEC_FIRMWARE) { 5514 return; 5515 } 5516#ifdef ISP_STRIPPED 5517 cname = NULL; 5518#else 5519 cname = (IS_FC(isp))? fc_mbcmd_names[opcode] : scsi_mbcmd_names[opcode]; 5520#endif 5521 if (cname == NULL) { 5522 cname = tname; 5523 SNPRINTF(tname, sizeof tname, "opcode %x", opcode); 5524 } 5525 5526 /* 5527 * Just to be chatty here... 5528 */ 5529 xname = NULL; 5530 switch (mbp->param[0]) { 5531 case MBOX_COMMAND_COMPLETE: 5532 break; 5533 case MBOX_INVALID_COMMAND: 5534 if (logmask & MBLOGMASK(MBOX_COMMAND_COMPLETE)) 5535 xname = "INVALID COMMAND"; 5536 break; 5537 case MBOX_HOST_INTERFACE_ERROR: 5538 if (logmask & MBLOGMASK(MBOX_HOST_INTERFACE_ERROR)) 5539 xname = "HOST INTERFACE ERROR"; 5540 break; 5541 case MBOX_TEST_FAILED: 5542 if (logmask & MBLOGMASK(MBOX_TEST_FAILED)) 5543 xname = "TEST FAILED"; 5544 break; 5545 case MBOX_COMMAND_ERROR: 5546 if (logmask & MBLOGMASK(MBOX_COMMAND_ERROR)) 5547 xname = "COMMAND ERROR"; 5548 break; 5549 case MBOX_COMMAND_PARAM_ERROR: 5550 if (logmask & MBLOGMASK(MBOX_COMMAND_PARAM_ERROR)) 5551 xname = "COMMAND PARAMETER ERROR"; 5552 break; 5553 case MBOX_LOOP_ID_USED: 5554 if (logmask & MBLOGMASK(MBOX_LOOP_ID_USED)) 5555 xname = "LOOP ID ALREADY IN USE"; 5556 break; 5557 case MBOX_PORT_ID_USED: 5558 if (logmask & MBLOGMASK(MBOX_PORT_ID_USED)) 5559 xname = "PORT ID ALREADY IN USE"; 5560 break; 5561 case MBOX_ALL_IDS_USED: 5562 if (logmask & MBLOGMASK(MBOX_ALL_IDS_USED)) 5563 xname = "ALL LOOP IDS IN USE"; 5564 break; 5565 case 0: /* special case */ 5566 xname = "TIMEOUT"; 5567 break; 5568 default: 5569 SNPRINTF(mname, sizeof mname, "error 0x%x", mbp->param[0]); 5570 xname = mname; 5571 break; 5572 } 5573 if (xname) 5574 isp_prt(isp, ISP_LOGALL, "Mailbox Command '%s' failed (%s)", 5575 cname, xname); 5576} 5577 5578static void 5579isp_fw_state(struct ispsoftc *isp) 5580{ 5581 if (IS_FC(isp)) { 5582 mbreg_t mbs; 5583 fcparam *fcp = isp->isp_param; 5584 5585 MEMZERO(&mbs, sizeof (mbs)); 5586 mbs.param[0] = MBOX_GET_FW_STATE; 5587 isp_mboxcmd(isp, &mbs, MBLOGALL); 5588 if (mbs.param[0] == MBOX_COMMAND_COMPLETE) { 5589 fcp->isp_fwstate = mbs.param[1]; 5590 } 5591 } 5592} 5593 5594static void 5595isp_update(struct ispsoftc *isp) 5596{ 5597 int bus, upmask; 5598 5599 for (bus = 0, upmask = isp->isp_update; upmask != 0; bus++) { 5600 if (upmask & (1 << bus)) { 5601 isp_update_bus(isp, bus); 5602 } 5603 upmask &= ~(1 << bus); 5604 } 5605} 5606 5607static void 5608isp_update_bus(struct ispsoftc *isp, int bus) 5609{ 5610 int tgt; 5611 mbreg_t mbs; 5612 sdparam *sdp; 5613 5614 isp->isp_update &= ~(1 << bus); 5615 if (IS_FC(isp)) { 5616 /* 5617 * There are no 'per-bus' settings for Fibre Channel. 5618 */ 5619 return; 5620 } 5621 sdp = isp->isp_param; 5622 sdp += bus; 5623 MEMZERO(&mbs, sizeof (mbs)); 5624 5625 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 5626 u_int16_t flags, period, offset; 5627 int get; 5628 5629 if (sdp->isp_devparam[tgt].dev_enable == 0) { 5630 sdp->isp_devparam[tgt].dev_update = 0; 5631 sdp->isp_devparam[tgt].dev_refresh = 0; 5632 isp_prt(isp, ISP_LOGDEBUG0, 5633 "skipping target %d bus %d update", tgt, bus); 5634 continue; 5635 } 5636 /* 5637 * If the goal is to update the status of the device, 5638 * take what's in goal_flags and try and set the device 5639 * toward that. Otherwise, if we're just refreshing the 5640 * current device state, get the current parameters. 5641 */ 5642 5643 /* 5644 * Refresh overrides set 5645 */ 5646 if (sdp->isp_devparam[tgt].dev_refresh) { 5647 mbs.param[0] = MBOX_GET_TARGET_PARAMS; 5648 sdp->isp_devparam[tgt].dev_refresh = 0; 5649 get = 1; 5650 } else if (sdp->isp_devparam[tgt].dev_update) { 5651 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 5652 /* 5653 * Make sure goal_flags has "Renegotiate on Error" 5654 * on and "Freeze Queue on Error" off. 5655 */ 5656 sdp->isp_devparam[tgt].goal_flags |= DPARM_RENEG; 5657 sdp->isp_devparam[tgt].goal_flags &= ~DPARM_QFRZ; 5658 5659 mbs.param[2] = sdp->isp_devparam[tgt].goal_flags; 5660 5661 /* 5662 * Insist that PARITY must be enabled 5663 * if SYNC or WIDE is enabled. 5664 */ 5665 if ((mbs.param[2] & (DPARM_SYNC|DPARM_WIDE)) != 0) { 5666 mbs.param[2] |= DPARM_PARITY; 5667 } 5668 5669 if ((mbs.param[2] & DPARM_SYNC) == 0) { 5670 mbs.param[3] = 0; 5671 } else { 5672 mbs.param[3] = 5673 (sdp->isp_devparam[tgt].goal_offset << 8) | 5674 (sdp->isp_devparam[tgt].goal_period); 5675 } 5676 /* 5677 * A command completion later that has 5678 * RQSTF_NEGOTIATION set can cause 5679 * the dev_refresh/announce cycle also. 5680 * 5681 * Note: It is really important to update our current 5682 * flags with at least the state of TAG capabilities- 5683 * otherwise we might try and send a tagged command 5684 * when we have it all turned off. So change it here 5685 * to say that current already matches goal. 5686 */ 5687 sdp->isp_devparam[tgt].actv_flags &= ~DPARM_TQING; 5688 sdp->isp_devparam[tgt].actv_flags |= 5689 (sdp->isp_devparam[tgt].goal_flags & DPARM_TQING); 5690 isp_prt(isp, ISP_LOGDEBUG0, 5691 "bus %d set tgt %d flags 0x%x off 0x%x period 0x%x", 5692 bus, tgt, mbs.param[2], mbs.param[3] >> 8, 5693 mbs.param[3] & 0xff); 5694 sdp->isp_devparam[tgt].dev_update = 0; 5695 sdp->isp_devparam[tgt].dev_refresh = 1; 5696 get = 0; 5697 } else { 5698 continue; 5699 } 5700 mbs.param[1] = (bus << 15) | (tgt << 8); 5701 isp_mboxcmd(isp, &mbs, MBLOGALL); 5702 if (get == 0) { 5703 isp->isp_sendmarker |= (1 << bus); 5704 continue; 5705 } 5706 flags = mbs.param[2]; 5707 period = mbs.param[3] & 0xff; 5708 offset = mbs.param[3] >> 8; 5709 sdp->isp_devparam[tgt].actv_flags = flags; 5710 sdp->isp_devparam[tgt].actv_period = period; 5711 sdp->isp_devparam[tgt].actv_offset = offset; 5712 get = (bus << 16) | tgt; 5713 (void) isp_async(isp, ISPASYNC_NEW_TGT_PARAMS, &get); 5714 } 5715 5716 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 5717 if (sdp->isp_devparam[tgt].dev_update || 5718 sdp->isp_devparam[tgt].dev_refresh) { 5719 isp->isp_update |= (1 << bus); 5720 break; 5721 } 5722 } 5723} 5724 5725#ifndef DEFAULT_FRAMESIZE 5726#define DEFAULT_FRAMESIZE(isp) ICB_DFLT_FRMLEN 5727#endif 5728#ifndef DEFAULT_EXEC_THROTTLE 5729#define DEFAULT_EXEC_THROTTLE(isp) ISP_EXEC_THROTTLE 5730#endif 5731 5732static void 5733isp_setdfltparm(struct ispsoftc *isp, int channel) 5734{ 5735 int tgt; 5736 mbreg_t mbs; 5737 sdparam *sdp; 5738 5739 MEMZERO(&mbs, sizeof (mbs)); 5740 if (IS_FC(isp)) { 5741 fcparam *fcp = (fcparam *) isp->isp_param; 5742 int nvfail; 5743 5744 fcp += channel; 5745 if (fcp->isp_gotdparms) { 5746 return; 5747 } 5748 fcp->isp_gotdparms = 1; 5749 fcp->isp_maxfrmlen = DEFAULT_FRAMESIZE(isp); 5750 fcp->isp_maxalloc = ICB_DFLT_ALLOC; 5751 fcp->isp_execthrottle = DEFAULT_EXEC_THROTTLE(isp); 5752 fcp->isp_retry_delay = ICB_DFLT_RDELAY; 5753 fcp->isp_retry_count = ICB_DFLT_RCOUNT; 5754 /* Platform specific.... */ 5755 fcp->isp_loopid = DEFAULT_LOOPID(isp); 5756 fcp->isp_nodewwn = DEFAULT_NODEWWN(isp); 5757 fcp->isp_portwwn = DEFAULT_PORTWWN(isp); 5758 fcp->isp_fwoptions = 0; 5759 fcp->isp_fwoptions |= ICBOPT_FAIRNESS; 5760 fcp->isp_fwoptions |= ICBOPT_PDBCHANGE_AE; 5761 fcp->isp_fwoptions |= ICBOPT_HARD_ADDRESS; 5762#ifndef ISP_NO_FASTPOST_FC 5763 fcp->isp_fwoptions |= ICBOPT_FAST_POST; 5764#endif 5765 if (isp->isp_confopts & ISP_CFG_FULL_DUPLEX) 5766 fcp->isp_fwoptions |= ICBOPT_FULL_DUPLEX; 5767 5768 /* 5769 * Make sure this is turned off now until we get 5770 * extended options from NVRAM 5771 */ 5772 fcp->isp_fwoptions &= ~ICBOPT_EXTENDED; 5773 5774 /* 5775 * Now try and read NVRAM unless told to not do so. 5776 * This will set fcparam's isp_nodewwn && isp_portwwn. 5777 */ 5778 if ((isp->isp_confopts & ISP_CFG_NONVRAM) == 0) { 5779 nvfail = isp_read_nvram(isp); 5780 if (nvfail) 5781 isp->isp_confopts |= ISP_CFG_NONVRAM; 5782 } else { 5783 nvfail = 1; 5784 } 5785 /* 5786 * Set node && port to override platform set defaults 5787 * unless the nvram read failed (or none was done), 5788 * or the platform code wants to use what had been 5789 * set in the defaults. 5790 */ 5791 if (nvfail) { 5792 isp->isp_confopts |= ISP_CFG_OWNWWPN|ISP_CFG_OWNWWNN; 5793 } 5794 if (isp->isp_confopts & ISP_CFG_OWNWWNN) { 5795 isp_prt(isp, ISP_LOGCONFIG, "Using Node WWN 0x%08x%08x", 5796 (u_int32_t) (DEFAULT_NODEWWN(isp) >> 32), 5797 (u_int32_t) (DEFAULT_NODEWWN(isp) & 0xffffffff)); 5798 ISP_NODEWWN(isp) = DEFAULT_NODEWWN(isp); 5799 } else { 5800 /* 5801 * We always start out with values derived 5802 * from NVRAM or our platform default. 5803 */ 5804 ISP_NODEWWN(isp) = fcp->isp_nodewwn; 5805 } 5806 if (isp->isp_confopts & ISP_CFG_OWNWWPN) { 5807 isp_prt(isp, ISP_LOGCONFIG, "Using Port WWN 0x%08x%08x", 5808 (u_int32_t) (DEFAULT_PORTWWN(isp) >> 32), 5809 (u_int32_t) (DEFAULT_PORTWWN(isp) & 0xffffffff)); 5810 ISP_PORTWWN(isp) = DEFAULT_PORTWWN(isp); 5811 } else { 5812 /* 5813 * We always start out with values derived 5814 * from NVRAM or our platform default. 5815 */ 5816 ISP_PORTWWN(isp) = fcp->isp_portwwn; 5817 } 5818 return; 5819 } 5820 5821 sdp = (sdparam *) isp->isp_param; 5822 sdp += channel; 5823 5824 /* 5825 * Been there, done that, got the T-shirt... 5826 */ 5827 if (sdp->isp_gotdparms) { 5828 return; 5829 } 5830 sdp->isp_gotdparms = 1; 5831 5832 /* 5833 * Establish some default parameters. 5834 */ 5835 sdp->isp_cmd_dma_burst_enable = 0; 5836 sdp->isp_data_dma_burst_enabl = 1; 5837 sdp->isp_fifo_threshold = 0; 5838 sdp->isp_initiator_id = DEFAULT_IID(isp); 5839 if (isp->isp_type >= ISP_HA_SCSI_1040) { 5840 sdp->isp_async_data_setup = 9; 5841 } else { 5842 sdp->isp_async_data_setup = 6; 5843 } 5844 sdp->isp_selection_timeout = 250; 5845 sdp->isp_max_queue_depth = MAXISPREQUEST(isp); 5846 sdp->isp_tag_aging = 8; 5847 sdp->isp_bus_reset_delay = 5; 5848 /* 5849 * Don't retry selection, busy or queue full automatically- reflect 5850 * these back to us. 5851 */ 5852 sdp->isp_retry_count = 0; 5853 sdp->isp_retry_delay = 0; 5854 5855 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 5856 sdp->isp_devparam[tgt].exc_throttle = ISP_EXEC_THROTTLE; 5857 sdp->isp_devparam[tgt].dev_enable = 1; 5858 } 5859 5860 /* 5861 * If we've not been told to avoid reading NVRAM, try and read it. 5862 * If we're successful reading it, we can then return because NVRAM 5863 * will tell us what the desired settings are. Otherwise, we establish 5864 * some reasonable 'fake' nvram and goal defaults. 5865 */ 5866 5867 if ((isp->isp_confopts & ISP_CFG_NONVRAM) == 0) { 5868 if (isp_read_nvram(isp) == 0) { 5869 return; 5870 } 5871 } 5872 5873 /* 5874 * Now try and see whether we have specific values for them. 5875 */ 5876 if ((isp->isp_confopts & ISP_CFG_NONVRAM) == 0) { 5877 mbs.param[0] = MBOX_GET_ACT_NEG_STATE; 5878 isp_mboxcmd(isp, &mbs, MBLOGNONE); 5879 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 5880 sdp->isp_req_ack_active_neg = 1; 5881 sdp->isp_data_line_active_neg = 1; 5882 } else { 5883 sdp->isp_req_ack_active_neg = 5884 (mbs.param[1+channel] >> 4) & 0x1; 5885 sdp->isp_data_line_active_neg = 5886 (mbs.param[1+channel] >> 5) & 0x1; 5887 } 5888 } 5889 5890 isp_prt(isp, ISP_LOGDEBUG0, sc0, sc3, 5891 0, sdp->isp_fifo_threshold, sdp->isp_initiator_id, 5892 sdp->isp_bus_reset_delay, sdp->isp_retry_count, 5893 sdp->isp_retry_delay, sdp->isp_async_data_setup); 5894 isp_prt(isp, ISP_LOGDEBUG0, sc1, sc3, 5895 sdp->isp_req_ack_active_neg, sdp->isp_data_line_active_neg, 5896 sdp->isp_data_dma_burst_enabl, sdp->isp_cmd_dma_burst_enable, 5897 sdp->isp_selection_timeout, sdp->isp_max_queue_depth); 5898 5899 /* 5900 * The trick here is to establish a default for the default (honk!) 5901 * state (goal_flags). Then try and get the current status from 5902 * the card to fill in the current state. We don't, in fact, set 5903 * the default to the SAFE default state- that's not the goal state. 5904 */ 5905 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 5906 u_int8_t off, per; 5907 sdp->isp_devparam[tgt].actv_offset = 0; 5908 sdp->isp_devparam[tgt].actv_period = 0; 5909 sdp->isp_devparam[tgt].actv_flags = 0; 5910 5911 sdp->isp_devparam[tgt].goal_flags = 5912 sdp->isp_devparam[tgt].nvrm_flags = DPARM_DEFAULT; 5913 5914 /* 5915 * We default to Wide/Fast for versions less than a 1040 5916 * (unless it's SBus). 5917 */ 5918 if (IS_ULTRA3(isp)) { 5919 off = ISP_80M_SYNCPARMS >> 8; 5920 per = ISP_80M_SYNCPARMS & 0xff; 5921 } else if (IS_ULTRA2(isp)) { 5922 off = ISP_40M_SYNCPARMS >> 8; 5923 per = ISP_40M_SYNCPARMS & 0xff; 5924 } else if (IS_1240(isp)) { 5925 off = ISP_20M_SYNCPARMS >> 8; 5926 per = ISP_20M_SYNCPARMS & 0xff; 5927 } else if ((isp->isp_bustype == ISP_BT_SBUS && 5928 isp->isp_type < ISP_HA_SCSI_1020A) || 5929 (isp->isp_bustype == ISP_BT_PCI && 5930 isp->isp_type < ISP_HA_SCSI_1040) || 5931 (isp->isp_clock && isp->isp_clock < 60) || 5932 (sdp->isp_ultramode == 0)) { 5933 off = ISP_10M_SYNCPARMS >> 8; 5934 per = ISP_10M_SYNCPARMS & 0xff; 5935 } else { 5936 off = ISP_20M_SYNCPARMS_1040 >> 8; 5937 per = ISP_20M_SYNCPARMS_1040 & 0xff; 5938 } 5939 sdp->isp_devparam[tgt].goal_offset = 5940 sdp->isp_devparam[tgt].nvrm_offset = off; 5941 sdp->isp_devparam[tgt].goal_period = 5942 sdp->isp_devparam[tgt].nvrm_period = per; 5943 5944 isp_prt(isp, ISP_LOGDEBUG0, sc2, sc3, 5945 channel, tgt, sdp->isp_devparam[tgt].nvrm_flags, 5946 sdp->isp_devparam[tgt].nvrm_offset, 5947 sdp->isp_devparam[tgt].nvrm_period); 5948 } 5949} 5950 5951/* 5952 * Re-initialize the ISP and complete all orphaned commands 5953 * with a 'botched' notice. The reset/init routines should 5954 * not disturb an already active list of commands. 5955 * 5956 * Locks held prior to coming here. 5957 */ 5958 5959void 5960isp_reinit(struct ispsoftc *isp) 5961{ 5962 XS_T *xs; 5963 int i; 5964 5965 if (IS_FC(isp)) { 5966 isp_mark_getpdb_all(isp); 5967 } 5968 isp_reset(isp); 5969 if (isp->isp_state != ISP_RESETSTATE) { 5970 isp_prt(isp, ISP_LOGERR, "isp_reinit cannot reset card"); 5971 } else if (isp->isp_role != ISP_ROLE_NONE) { 5972 isp_init(isp); 5973 if (isp->isp_state == ISP_INITSTATE) { 5974 isp->isp_state = ISP_RUNSTATE; 5975 } 5976 if (isp->isp_state != ISP_RUNSTATE) { 5977 isp_prt(isp, ISP_LOGERR, 5978 "isp_reinit cannot restart card"); 5979 } 5980 } 5981 isp->isp_nactive = 0; 5982 5983 for (i = 0; i < isp->isp_maxcmds; i++) { 5984 u_int16_t handle; 5985 xs = isp->isp_xflist[i]; 5986 if (xs == NULL) { 5987 continue; 5988 } 5989 handle = isp_index_handle(i); 5990 isp_destroy_handle(isp, handle); 5991 if (XS_XFRLEN(xs)) { 5992 ISP_DMAFREE(isp, xs, handle); 5993 XS_RESID(xs) = XS_XFRLEN(xs); 5994 } else { 5995 XS_RESID(xs) = 0; 5996 } 5997 XS_SETERR(xs, HBA_BUSRESET); 5998 isp_done(xs); 5999 } 6000} 6001 6002/* 6003 * NVRAM Routines 6004 */ 6005static int 6006isp_read_nvram(struct ispsoftc *isp) 6007{ 6008 int i, amt; 6009 u_int8_t csum, minversion; 6010 union { 6011 u_int8_t _x[ISP2100_NVRAM_SIZE]; 6012 u_int16_t _s[ISP2100_NVRAM_SIZE>>1]; 6013 } _n; 6014#define nvram_data _n._x 6015#define nvram_words _n._s 6016 6017 if (IS_FC(isp)) { 6018 amt = ISP2100_NVRAM_SIZE; 6019 minversion = 1; 6020 } else if (IS_ULTRA2(isp)) { 6021 amt = ISP1080_NVRAM_SIZE; 6022 minversion = 0; 6023 } else { 6024 amt = ISP_NVRAM_SIZE; 6025 minversion = 2; 6026 } 6027 6028 /* 6029 * Just read the first two words first to see if we have a valid 6030 * NVRAM to continue reading the rest with. 6031 */ 6032 for (i = 0; i < 2; i++) { 6033 isp_rdnvram_word(isp, i, &nvram_words[i]); 6034 } 6035 if (nvram_data[0] != 'I' || nvram_data[1] != 'S' || 6036 nvram_data[2] != 'P') { 6037 if (isp->isp_bustype != ISP_BT_SBUS) { 6038 isp_prt(isp, ISP_LOGWARN, "invalid NVRAM header"); 6039 isp_prt(isp, ISP_LOGDEBUG0, "%x %x %x", 6040 nvram_data[0], nvram_data[1], nvram_data[2]); 6041 } 6042 return (-1); 6043 } 6044 for (i = 2; i < amt>>1; i++) { 6045 isp_rdnvram_word(isp, i, &nvram_words[i]); 6046 } 6047 for (csum = 0, i = 0; i < amt; i++) { 6048 csum += nvram_data[i]; 6049 } 6050 if (csum != 0) { 6051 isp_prt(isp, ISP_LOGWARN, "invalid NVRAM checksum"); 6052 return (-1); 6053 } 6054 if (ISP_NVRAM_VERSION(nvram_data) < minversion) { 6055 isp_prt(isp, ISP_LOGWARN, "version %d NVRAM not understood", 6056 ISP_NVRAM_VERSION(nvram_data)); 6057 return (-1); 6058 } 6059 6060 if (IS_ULTRA3(isp)) { 6061 isp_parse_nvram_12160(isp, 0, nvram_data); 6062 if (IS_12160(isp)) 6063 isp_parse_nvram_12160(isp, 1, nvram_data); 6064 } else if (IS_1080(isp)) { 6065 isp_parse_nvram_1080(isp, 0, nvram_data); 6066 } else if (IS_1280(isp) || IS_1240(isp)) { 6067 isp_parse_nvram_1080(isp, 0, nvram_data); 6068 isp_parse_nvram_1080(isp, 1, nvram_data); 6069 } else if (IS_SCSI(isp)) { 6070 isp_parse_nvram_1020(isp, nvram_data); 6071 } else { 6072 isp_parse_nvram_2100(isp, nvram_data); 6073 } 6074 return (0); 6075#undef nvram_data 6076#undef nvram_words 6077} 6078 6079static void 6080isp_rdnvram_word(struct ispsoftc *isp, int wo, u_int16_t *rp) 6081{ 6082 int i, cbits; 6083 u_int16_t bit, rqst; 6084 6085 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT); 6086 USEC_DELAY(2); 6087 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT|BIU_NVRAM_CLOCK); 6088 USEC_DELAY(2); 6089 6090 if (IS_FC(isp)) { 6091 wo &= ((ISP2100_NVRAM_SIZE >> 1) - 1); 6092 if (IS_2312(isp) && isp->isp_port) { 6093 wo += 128; 6094 } 6095 rqst = (ISP_NVRAM_READ << 8) | wo; 6096 cbits = 10; 6097 } else if (IS_ULTRA2(isp)) { 6098 wo &= ((ISP1080_NVRAM_SIZE >> 1) - 1); 6099 rqst = (ISP_NVRAM_READ << 8) | wo; 6100 cbits = 10; 6101 } else { 6102 wo &= ((ISP_NVRAM_SIZE >> 1) - 1); 6103 rqst = (ISP_NVRAM_READ << 6) | wo; 6104 cbits = 8; 6105 } 6106 6107 /* 6108 * Clock the word select request out... 6109 */ 6110 for (i = cbits; i >= 0; i--) { 6111 if ((rqst >> i) & 1) { 6112 bit = BIU_NVRAM_SELECT | BIU_NVRAM_DATAOUT; 6113 } else { 6114 bit = BIU_NVRAM_SELECT; 6115 } 6116 ISP_WRITE(isp, BIU_NVRAM, bit); 6117 USEC_DELAY(2); 6118 ISP_WRITE(isp, BIU_NVRAM, bit | BIU_NVRAM_CLOCK); 6119 USEC_DELAY(2); 6120 ISP_WRITE(isp, BIU_NVRAM, bit); 6121 USEC_DELAY(2); 6122 } 6123 /* 6124 * Now read the result back in (bits come back in MSB format). 6125 */ 6126 *rp = 0; 6127 for (i = 0; i < 16; i++) { 6128 u_int16_t rv; 6129 *rp <<= 1; 6130 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT|BIU_NVRAM_CLOCK); 6131 USEC_DELAY(2); 6132 rv = ISP_READ(isp, BIU_NVRAM); 6133 if (rv & BIU_NVRAM_DATAIN) { 6134 *rp |= 1; 6135 } 6136 USEC_DELAY(2); 6137 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT); 6138 USEC_DELAY(2); 6139 } 6140 ISP_WRITE(isp, BIU_NVRAM, 0); 6141 USEC_DELAY(2); 6142 ISP_SWIZZLE_NVRAM_WORD(isp, rp); 6143} 6144 6145static void 6146isp_parse_nvram_1020(struct ispsoftc *isp, u_int8_t *nvram_data) 6147{ 6148 sdparam *sdp = (sdparam *) isp->isp_param; 6149 int tgt; 6150 6151 sdp->isp_fifo_threshold = 6152 ISP_NVRAM_FIFO_THRESHOLD(nvram_data) | 6153 (ISP_NVRAM_FIFO_THRESHOLD_128(nvram_data) << 2); 6154 6155 if ((isp->isp_confopts & ISP_CFG_OWNLOOPID) == 0) 6156 sdp->isp_initiator_id = 6157 ISP_NVRAM_INITIATOR_ID(nvram_data); 6158 6159 sdp->isp_bus_reset_delay = 6160 ISP_NVRAM_BUS_RESET_DELAY(nvram_data); 6161 6162 sdp->isp_retry_count = 6163 ISP_NVRAM_BUS_RETRY_COUNT(nvram_data); 6164 6165 sdp->isp_retry_delay = 6166 ISP_NVRAM_BUS_RETRY_DELAY(nvram_data); 6167 6168 sdp->isp_async_data_setup = 6169 ISP_NVRAM_ASYNC_DATA_SETUP_TIME(nvram_data); 6170 6171 if (isp->isp_type >= ISP_HA_SCSI_1040) { 6172 if (sdp->isp_async_data_setup < 9) { 6173 sdp->isp_async_data_setup = 9; 6174 } 6175 } else { 6176 if (sdp->isp_async_data_setup != 6) { 6177 sdp->isp_async_data_setup = 6; 6178 } 6179 } 6180 6181 sdp->isp_req_ack_active_neg = 6182 ISP_NVRAM_REQ_ACK_ACTIVE_NEGATION(nvram_data); 6183 6184 sdp->isp_data_line_active_neg = 6185 ISP_NVRAM_DATA_LINE_ACTIVE_NEGATION(nvram_data); 6186 6187 sdp->isp_data_dma_burst_enabl = 6188 ISP_NVRAM_DATA_DMA_BURST_ENABLE(nvram_data); 6189 6190 sdp->isp_cmd_dma_burst_enable = 6191 ISP_NVRAM_CMD_DMA_BURST_ENABLE(nvram_data); 6192 6193 sdp->isp_tag_aging = 6194 ISP_NVRAM_TAG_AGE_LIMIT(nvram_data); 6195 6196 sdp->isp_selection_timeout = 6197 ISP_NVRAM_SELECTION_TIMEOUT(nvram_data); 6198 6199 sdp->isp_max_queue_depth = 6200 ISP_NVRAM_MAX_QUEUE_DEPTH(nvram_data); 6201 6202 sdp->isp_fast_mttr = ISP_NVRAM_FAST_MTTR_ENABLE(nvram_data); 6203 6204 isp_prt(isp, ISP_LOGDEBUG0, sc0, sc4, 6205 0, sdp->isp_fifo_threshold, sdp->isp_initiator_id, 6206 sdp->isp_bus_reset_delay, sdp->isp_retry_count, 6207 sdp->isp_retry_delay, sdp->isp_async_data_setup); 6208 isp_prt(isp, ISP_LOGDEBUG0, sc1, sc4, 6209 sdp->isp_req_ack_active_neg, sdp->isp_data_line_active_neg, 6210 sdp->isp_data_dma_burst_enabl, sdp->isp_cmd_dma_burst_enable, 6211 sdp->isp_selection_timeout, sdp->isp_max_queue_depth); 6212 6213 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 6214 sdp->isp_devparam[tgt].dev_enable = 6215 ISP_NVRAM_TGT_DEVICE_ENABLE(nvram_data, tgt); 6216 sdp->isp_devparam[tgt].exc_throttle = 6217 ISP_NVRAM_TGT_EXEC_THROTTLE(nvram_data, tgt); 6218 sdp->isp_devparam[tgt].nvrm_offset = 6219 ISP_NVRAM_TGT_SYNC_OFFSET(nvram_data, tgt); 6220 sdp->isp_devparam[tgt].nvrm_period = 6221 ISP_NVRAM_TGT_SYNC_PERIOD(nvram_data, tgt); 6222 /* 6223 * We probably shouldn't lie about this, but it 6224 * it makes it much safer if we limit NVRAM values 6225 * to sanity. 6226 */ 6227 if (isp->isp_type < ISP_HA_SCSI_1040) { 6228 /* 6229 * If we're not ultra, we can't possibly 6230 * be a shorter period than this. 6231 */ 6232 if (sdp->isp_devparam[tgt].nvrm_period < 0x19) { 6233 sdp->isp_devparam[tgt].nvrm_period = 0x19; 6234 } 6235 if (sdp->isp_devparam[tgt].nvrm_offset > 0xc) { 6236 sdp->isp_devparam[tgt].nvrm_offset = 0x0c; 6237 } 6238 } else { 6239 if (sdp->isp_devparam[tgt].nvrm_offset > 0x8) { 6240 sdp->isp_devparam[tgt].nvrm_offset = 0x8; 6241 } 6242 } 6243 sdp->isp_devparam[tgt].nvrm_flags = 0; 6244 if (ISP_NVRAM_TGT_RENEG(nvram_data, tgt)) 6245 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_RENEG; 6246 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_ARQ; 6247 if (ISP_NVRAM_TGT_TQING(nvram_data, tgt)) 6248 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_TQING; 6249 if (ISP_NVRAM_TGT_SYNC(nvram_data, tgt)) 6250 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_SYNC; 6251 if (ISP_NVRAM_TGT_WIDE(nvram_data, tgt)) 6252 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_WIDE; 6253 if (ISP_NVRAM_TGT_PARITY(nvram_data, tgt)) 6254 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_PARITY; 6255 if (ISP_NVRAM_TGT_DISC(nvram_data, tgt)) 6256 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_DISC; 6257 sdp->isp_devparam[tgt].actv_flags = 0; /* we don't know */ 6258 isp_prt(isp, ISP_LOGDEBUG0, sc2, sc4, 6259 0, tgt, sdp->isp_devparam[tgt].nvrm_flags, 6260 sdp->isp_devparam[tgt].nvrm_offset, 6261 sdp->isp_devparam[tgt].nvrm_period); 6262 sdp->isp_devparam[tgt].goal_offset = 6263 sdp->isp_devparam[tgt].nvrm_offset; 6264 sdp->isp_devparam[tgt].goal_period = 6265 sdp->isp_devparam[tgt].nvrm_period; 6266 sdp->isp_devparam[tgt].goal_flags = 6267 sdp->isp_devparam[tgt].nvrm_flags; 6268 } 6269} 6270 6271static void 6272isp_parse_nvram_1080(struct ispsoftc *isp, int bus, u_int8_t *nvram_data) 6273{ 6274 sdparam *sdp = (sdparam *) isp->isp_param; 6275 int tgt; 6276 6277 sdp += bus; 6278 6279 sdp->isp_fifo_threshold = 6280 ISP1080_NVRAM_FIFO_THRESHOLD(nvram_data); 6281 6282 if ((isp->isp_confopts & ISP_CFG_OWNLOOPID) == 0) 6283 sdp->isp_initiator_id = 6284 ISP1080_NVRAM_INITIATOR_ID(nvram_data, bus); 6285 6286 sdp->isp_bus_reset_delay = 6287 ISP1080_NVRAM_BUS_RESET_DELAY(nvram_data, bus); 6288 6289 sdp->isp_retry_count = 6290 ISP1080_NVRAM_BUS_RETRY_COUNT(nvram_data, bus); 6291 6292 sdp->isp_retry_delay = 6293 ISP1080_NVRAM_BUS_RETRY_DELAY(nvram_data, bus); 6294 6295 sdp->isp_async_data_setup = 6296 ISP1080_NVRAM_ASYNC_DATA_SETUP_TIME(nvram_data, bus); 6297 6298 sdp->isp_req_ack_active_neg = 6299 ISP1080_NVRAM_REQ_ACK_ACTIVE_NEGATION(nvram_data, bus); 6300 6301 sdp->isp_data_line_active_neg = 6302 ISP1080_NVRAM_DATA_LINE_ACTIVE_NEGATION(nvram_data, bus); 6303 6304 sdp->isp_data_dma_burst_enabl = 6305 ISP1080_NVRAM_BURST_ENABLE(nvram_data); 6306 6307 sdp->isp_cmd_dma_burst_enable = 6308 ISP1080_NVRAM_BURST_ENABLE(nvram_data); 6309 6310 sdp->isp_selection_timeout = 6311 ISP1080_NVRAM_SELECTION_TIMEOUT(nvram_data, bus); 6312 6313 sdp->isp_max_queue_depth = 6314 ISP1080_NVRAM_MAX_QUEUE_DEPTH(nvram_data, bus); 6315 6316 isp_prt(isp, ISP_LOGDEBUG0, sc0, sc4, 6317 bus, sdp->isp_fifo_threshold, sdp->isp_initiator_id, 6318 sdp->isp_bus_reset_delay, sdp->isp_retry_count, 6319 sdp->isp_retry_delay, sdp->isp_async_data_setup); 6320 isp_prt(isp, ISP_LOGDEBUG0, sc1, sc4, 6321 sdp->isp_req_ack_active_neg, sdp->isp_data_line_active_neg, 6322 sdp->isp_data_dma_burst_enabl, sdp->isp_cmd_dma_burst_enable, 6323 sdp->isp_selection_timeout, sdp->isp_max_queue_depth); 6324 6325 6326 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 6327 sdp->isp_devparam[tgt].dev_enable = 6328 ISP1080_NVRAM_TGT_DEVICE_ENABLE(nvram_data, tgt, bus); 6329 sdp->isp_devparam[tgt].exc_throttle = 6330 ISP1080_NVRAM_TGT_EXEC_THROTTLE(nvram_data, tgt, bus); 6331 sdp->isp_devparam[tgt].nvrm_offset = 6332 ISP1080_NVRAM_TGT_SYNC_OFFSET(nvram_data, tgt, bus); 6333 sdp->isp_devparam[tgt].nvrm_period = 6334 ISP1080_NVRAM_TGT_SYNC_PERIOD(nvram_data, tgt, bus); 6335 sdp->isp_devparam[tgt].nvrm_flags = 0; 6336 if (ISP1080_NVRAM_TGT_RENEG(nvram_data, tgt, bus)) 6337 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_RENEG; 6338 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_ARQ; 6339 if (ISP1080_NVRAM_TGT_TQING(nvram_data, tgt, bus)) 6340 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_TQING; 6341 if (ISP1080_NVRAM_TGT_SYNC(nvram_data, tgt, bus)) 6342 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_SYNC; 6343 if (ISP1080_NVRAM_TGT_WIDE(nvram_data, tgt, bus)) 6344 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_WIDE; 6345 if (ISP1080_NVRAM_TGT_PARITY(nvram_data, tgt, bus)) 6346 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_PARITY; 6347 if (ISP1080_NVRAM_TGT_DISC(nvram_data, tgt, bus)) 6348 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_DISC; 6349 sdp->isp_devparam[tgt].actv_flags = 0; 6350 isp_prt(isp, ISP_LOGDEBUG0, sc2, sc4, 6351 bus, tgt, sdp->isp_devparam[tgt].nvrm_flags, 6352 sdp->isp_devparam[tgt].nvrm_offset, 6353 sdp->isp_devparam[tgt].nvrm_period); 6354 sdp->isp_devparam[tgt].goal_offset = 6355 sdp->isp_devparam[tgt].nvrm_offset; 6356 sdp->isp_devparam[tgt].goal_period = 6357 sdp->isp_devparam[tgt].nvrm_period; 6358 sdp->isp_devparam[tgt].goal_flags = 6359 sdp->isp_devparam[tgt].nvrm_flags; 6360 } 6361} 6362 6363static void 6364isp_parse_nvram_12160(struct ispsoftc *isp, int bus, u_int8_t *nvram_data) 6365{ 6366 sdparam *sdp = (sdparam *) isp->isp_param; 6367 int tgt; 6368 6369 sdp += bus; 6370 6371 sdp->isp_fifo_threshold = 6372 ISP12160_NVRAM_FIFO_THRESHOLD(nvram_data); 6373 6374 if ((isp->isp_confopts & ISP_CFG_OWNLOOPID) == 0) 6375 sdp->isp_initiator_id = 6376 ISP12160_NVRAM_INITIATOR_ID(nvram_data, bus); 6377 6378 sdp->isp_bus_reset_delay = 6379 ISP12160_NVRAM_BUS_RESET_DELAY(nvram_data, bus); 6380 6381 sdp->isp_retry_count = 6382 ISP12160_NVRAM_BUS_RETRY_COUNT(nvram_data, bus); 6383 6384 sdp->isp_retry_delay = 6385 ISP12160_NVRAM_BUS_RETRY_DELAY(nvram_data, bus); 6386 6387 sdp->isp_async_data_setup = 6388 ISP12160_NVRAM_ASYNC_DATA_SETUP_TIME(nvram_data, bus); 6389 6390 sdp->isp_req_ack_active_neg = 6391 ISP12160_NVRAM_REQ_ACK_ACTIVE_NEGATION(nvram_data, bus); 6392 6393 sdp->isp_data_line_active_neg = 6394 ISP12160_NVRAM_DATA_LINE_ACTIVE_NEGATION(nvram_data, bus); 6395 6396 sdp->isp_data_dma_burst_enabl = 6397 ISP12160_NVRAM_BURST_ENABLE(nvram_data); 6398 6399 sdp->isp_cmd_dma_burst_enable = 6400 ISP12160_NVRAM_BURST_ENABLE(nvram_data); 6401 6402 sdp->isp_selection_timeout = 6403 ISP12160_NVRAM_SELECTION_TIMEOUT(nvram_data, bus); 6404 6405 sdp->isp_max_queue_depth = 6406 ISP12160_NVRAM_MAX_QUEUE_DEPTH(nvram_data, bus); 6407 6408 isp_prt(isp, ISP_LOGDEBUG0, sc0, sc4, 6409 bus, sdp->isp_fifo_threshold, sdp->isp_initiator_id, 6410 sdp->isp_bus_reset_delay, sdp->isp_retry_count, 6411 sdp->isp_retry_delay, sdp->isp_async_data_setup); 6412 isp_prt(isp, ISP_LOGDEBUG0, sc1, sc4, 6413 sdp->isp_req_ack_active_neg, sdp->isp_data_line_active_neg, 6414 sdp->isp_data_dma_burst_enabl, sdp->isp_cmd_dma_burst_enable, 6415 sdp->isp_selection_timeout, sdp->isp_max_queue_depth); 6416 6417 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 6418 sdp->isp_devparam[tgt].dev_enable = 6419 ISP12160_NVRAM_TGT_DEVICE_ENABLE(nvram_data, tgt, bus); 6420 sdp->isp_devparam[tgt].exc_throttle = 6421 ISP12160_NVRAM_TGT_EXEC_THROTTLE(nvram_data, tgt, bus); 6422 sdp->isp_devparam[tgt].nvrm_offset = 6423 ISP12160_NVRAM_TGT_SYNC_OFFSET(nvram_data, tgt, bus); 6424 sdp->isp_devparam[tgt].nvrm_period = 6425 ISP12160_NVRAM_TGT_SYNC_PERIOD(nvram_data, tgt, bus); 6426 sdp->isp_devparam[tgt].nvrm_flags = 0; 6427 if (ISP12160_NVRAM_TGT_RENEG(nvram_data, tgt, bus)) 6428 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_RENEG; 6429 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_ARQ; 6430 if (ISP12160_NVRAM_TGT_TQING(nvram_data, tgt, bus)) 6431 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_TQING; 6432 if (ISP12160_NVRAM_TGT_SYNC(nvram_data, tgt, bus)) 6433 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_SYNC; 6434 if (ISP12160_NVRAM_TGT_WIDE(nvram_data, tgt, bus)) 6435 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_WIDE; 6436 if (ISP12160_NVRAM_TGT_PARITY(nvram_data, tgt, bus)) 6437 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_PARITY; 6438 if (ISP12160_NVRAM_TGT_DISC(nvram_data, tgt, bus)) 6439 sdp->isp_devparam[tgt].nvrm_flags |= DPARM_DISC; 6440 sdp->isp_devparam[tgt].actv_flags = 0; 6441 isp_prt(isp, ISP_LOGDEBUG0, sc2, sc4, 6442 bus, tgt, sdp->isp_devparam[tgt].nvrm_flags, 6443 sdp->isp_devparam[tgt].nvrm_offset, 6444 sdp->isp_devparam[tgt].nvrm_period); 6445 sdp->isp_devparam[tgt].goal_offset = 6446 sdp->isp_devparam[tgt].nvrm_offset; 6447 sdp->isp_devparam[tgt].goal_period = 6448 sdp->isp_devparam[tgt].nvrm_period; 6449 sdp->isp_devparam[tgt].goal_flags = 6450 sdp->isp_devparam[tgt].nvrm_flags; 6451 } 6452} 6453 6454static void 6455isp_parse_nvram_2100(struct ispsoftc *isp, u_int8_t *nvram_data) 6456{ 6457 fcparam *fcp = (fcparam *) isp->isp_param; 6458 u_int64_t wwn; 6459 6460 /* 6461 * There is NVRAM storage for both Port and Node entities- 6462 * but the Node entity appears to be unused on all the cards 6463 * I can find. However, we should account for this being set 6464 * at some point in the future. 6465 * 6466 * Qlogic WWNs have an NAA of 2, but usually nothing shows up in 6467 * bits 48..60. In the case of the 2202, it appears that they do 6468 * use bit 48 to distinguish between the two instances on the card. 6469 * The 2204, which I've never seen, *probably* extends this method. 6470 */ 6471 wwn = ISP2100_NVRAM_PORT_NAME(nvram_data); 6472 if (wwn) { 6473 isp_prt(isp, ISP_LOGCONFIG, "NVRAM Port WWN 0x%08x%08x", 6474 (u_int32_t) (wwn >> 32), (u_int32_t) (wwn & 0xffffffff)); 6475 if ((wwn >> 60) == 0) { 6476 wwn |= (((u_int64_t) 2)<< 60); 6477 } 6478 } 6479 fcp->isp_portwwn = wwn; 6480 if (IS_2200(isp) || IS_23XX(isp)) { 6481 wwn = ISP2200_NVRAM_NODE_NAME(nvram_data); 6482 if (wwn) { 6483 isp_prt(isp, ISP_LOGCONFIG, "NVRAM Node WWN 0x%08x%08x", 6484 (u_int32_t) (wwn >> 32), 6485 (u_int32_t) (wwn & 0xffffffff)); 6486 if ((wwn >> 60) == 0) { 6487 wwn |= (((u_int64_t) 2)<< 60); 6488 } 6489 } 6490 } else { 6491 wwn &= ~((u_int64_t) 0xfff << 48); 6492 } 6493 fcp->isp_nodewwn = wwn; 6494 6495 /* 6496 * Make sure we have both Node and Port as non-zero values. 6497 */ 6498 if (fcp->isp_nodewwn != 0 && fcp->isp_portwwn == 0) { 6499 fcp->isp_portwwn = fcp->isp_nodewwn; 6500 } else if (fcp->isp_nodewwn == 0 && fcp->isp_portwwn != 0) { 6501 fcp->isp_nodewwn = fcp->isp_portwwn; 6502 } 6503 6504 /* 6505 * Make the Node and Port values sane if they're NAA == 2. 6506 * This means to clear bits 48..56 for the Node WWN and 6507 * make sure that there's some non-zero value in 48..56 6508 * for the Port WWN. 6509 */ 6510 if (fcp->isp_nodewwn && fcp->isp_portwwn) { 6511 if ((fcp->isp_nodewwn & (((u_int64_t) 0xfff) << 48)) != 0 && 6512 (fcp->isp_nodewwn >> 60) == 2) { 6513 fcp->isp_nodewwn &= ~((u_int64_t) 0xfff << 48); 6514 } 6515 if ((fcp->isp_portwwn & (((u_int64_t) 0xfff) << 48)) == 0 && 6516 (fcp->isp_portwwn >> 60) == 2) { 6517 fcp->isp_portwwn |= ((u_int64_t) 1 << 56); 6518 } 6519 } 6520 6521 isp_prt(isp, ISP_LOGDEBUG0, 6522 "NVRAM: maxfrmlen %d execthrottle %d fwoptions 0x%x loopid %x", 6523 ISP2100_NVRAM_MAXFRAMELENGTH(nvram_data), 6524 ISP2100_NVRAM_EXECUTION_THROTTLE(nvram_data), 6525 ISP2100_NVRAM_OPTIONS(nvram_data), 6526 ISP2100_NVRAM_HARDLOOPID(nvram_data)); 6527 6528 fcp->isp_maxalloc = 6529 ISP2100_NVRAM_MAXIOCBALLOCATION(nvram_data); 6530 if ((isp->isp_confopts & ISP_CFG_OWNFSZ) == 0) 6531 fcp->isp_maxfrmlen = 6532 ISP2100_NVRAM_MAXFRAMELENGTH(nvram_data); 6533 fcp->isp_retry_delay = 6534 ISP2100_NVRAM_RETRY_DELAY(nvram_data); 6535 fcp->isp_retry_count = 6536 ISP2100_NVRAM_RETRY_COUNT(nvram_data); 6537 if ((isp->isp_confopts & ISP_CFG_OWNLOOPID) == 0) 6538 fcp->isp_loopid = 6539 ISP2100_NVRAM_HARDLOOPID(nvram_data); 6540 if ((isp->isp_confopts & ISP_CFG_OWNEXCTHROTTLE) == 0) 6541 fcp->isp_execthrottle = 6542 ISP2100_NVRAM_EXECUTION_THROTTLE(nvram_data); 6543 fcp->isp_fwoptions = ISP2100_NVRAM_OPTIONS(nvram_data); 6544} 6545 6546#ifdef ISP_FW_CRASH_DUMP 6547static void isp2200_fw_dump(struct ispsoftc *); 6548static void isp2300_fw_dump(struct ispsoftc *); 6549 6550static void 6551isp2200_fw_dump(struct ispsoftc *isp) 6552{ 6553 int i, j; 6554 mbreg_t mbs; 6555 u_int16_t *ptr; 6556 6557 MEMZERO(&mbs, sizeof (mbs)); 6558 ptr = FCPARAM(isp)->isp_dump_data; 6559 if (ptr == NULL) { 6560 isp_prt(isp, ISP_LOGERR, 6561 "No place to dump RISC registers and SRAM"); 6562 return; 6563 } 6564 if (*ptr++) { 6565 isp_prt(isp, ISP_LOGERR, 6566 "dump area for RISC registers and SRAM already used"); 6567 return; 6568 } 6569 ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE); 6570 for (i = 0; i < 100; i++) { 6571 USEC_DELAY(100); 6572 if (ISP_READ(isp, HCCR) & HCCR_PAUSE) { 6573 break; 6574 } 6575 } 6576 if (ISP_READ(isp, HCCR) & HCCR_PAUSE) { 6577 /* 6578 * PBIU Registers 6579 */ 6580 for (i = 0; i < 8; i++) { 6581 *ptr++ = ISP_READ(isp, BIU_BLOCK + (i << 1)); 6582 } 6583 6584 /* 6585 * Mailbox Registers 6586 */ 6587 for (i = 0; i < 8; i++) { 6588 *ptr++ = ISP_READ(isp, MBOX_BLOCK + (i << 1)); 6589 } 6590 6591 /* 6592 * DMA Registers 6593 */ 6594 for (i = 0; i < 48; i++) { 6595 *ptr++ = ISP_READ(isp, DMA_BLOCK + 0x20 + (i << 1)); 6596 } 6597 6598 /* 6599 * RISC H/W Registers 6600 */ 6601 ISP_WRITE(isp, BIU2100_CSR, 0); 6602 for (i = 0; i < 16; i++) { 6603 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0xA0 + (i << 1)); 6604 } 6605 6606 /* 6607 * RISC GP Registers 6608 */ 6609 for (j = 0; j < 8; j++) { 6610 ISP_WRITE(isp, BIU_BLOCK + 0xA4, 0x2000 + (j << 8)); 6611 for (i = 0; i < 16; i++) { 6612 *ptr++ = 6613 ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6614 } 6615 } 6616 6617 /* 6618 * Frame Buffer Hardware Registers 6619 */ 6620 ISP_WRITE(isp, BIU2100_CSR, 0x10); 6621 for (i = 0; i < 16; i++) { 6622 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6623 } 6624 6625 /* 6626 * Fibre Protocol Module 0 Hardware Registers 6627 */ 6628 ISP_WRITE(isp, BIU2100_CSR, 0x20); 6629 for (i = 0; i < 64; i++) { 6630 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6631 } 6632 6633 /* 6634 * Fibre Protocol Module 1 Hardware Registers 6635 */ 6636 ISP_WRITE(isp, BIU2100_CSR, 0x30); 6637 for (i = 0; i < 64; i++) { 6638 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6639 } 6640 } else { 6641 isp_prt(isp, ISP_LOGERR, "RISC Would Not Pause"); 6642 return; 6643 } 6644 isp_prt(isp, ISP_LOGALL, 6645 "isp_fw_dump: RISC registers dumped successfully"); 6646 ISP_WRITE(isp, BIU2100_CSR, BIU2100_SOFT_RESET); 6647 for (i = 0; i < 100; i++) { 6648 USEC_DELAY(100); 6649 if (ISP_READ(isp, OUTMAILBOX0) == 0) { 6650 break; 6651 } 6652 } 6653 if (ISP_READ(isp, OUTMAILBOX0) != 0) { 6654 isp_prt(isp, ISP_LOGERR, "Board Would Not Reset"); 6655 return; 6656 } 6657 ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE); 6658 for (i = 0; i < 100; i++) { 6659 USEC_DELAY(100); 6660 if (ISP_READ(isp, HCCR) & HCCR_PAUSE) { 6661 break; 6662 } 6663 } 6664 if ((ISP_READ(isp, HCCR) & HCCR_PAUSE) == 0) { 6665 isp_prt(isp, ISP_LOGERR, "RISC Would Not Pause After Reset"); 6666 return; 6667 } 6668 ISP_WRITE(isp, RISC_EMB, 0xf2); 6669 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); 6670 for (i = 0; i < 100; i++) { 6671 USEC_DELAY(100); 6672 if ((ISP_READ(isp, HCCR) & HCCR_PAUSE) == 0) { 6673 break; 6674 } 6675 } 6676 ENABLE_INTS(isp); 6677 mbs.param[0] = MBOX_READ_RAM_WORD; 6678 mbs.param[1] = 0x1000; 6679 isp->isp_mbxworkp = (void *) ptr; 6680 isp->isp_mbxwrk0 = 0xefff; /* continuation count */ 6681 isp->isp_mbxwrk1 = 0x1001; /* next SRAM address */ 6682 isp_control(isp, ISPCTL_RUN_MBOXCMD, &mbs); 6683 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 6684 isp_prt(isp, ISP_LOGWARN, 6685 "RAM DUMP FAILED @ WORD %x", isp->isp_mbxwrk1); 6686 return; 6687 } 6688 ptr = isp->isp_mbxworkp; /* finish fetch of final word */ 6689 *ptr++ = isp->isp_mboxtmp[2]; 6690 isp_prt(isp, ISP_LOGALL, "isp_fw_dump: SRAM dumped successfully"); 6691 FCPARAM(isp)->isp_dump_data[0] = isp->isp_type; /* now used */ 6692 (void) isp_async(isp, ISPASYNC_FW_DUMPED, 0); 6693} 6694 6695static void 6696isp2300_fw_dump(struct ispsoftc *isp) 6697{ 6698 int i, j; 6699 mbreg_t mbs; 6700 u_int16_t *ptr; 6701 6702 MEMZERO(&mbs, sizeof (mbs)); 6703 ptr = FCPARAM(isp)->isp_dump_data; 6704 if (ptr == NULL) { 6705 isp_prt(isp, ISP_LOGERR, 6706 "No place to dump RISC registers and SRAM"); 6707 return; 6708 } 6709 if (*ptr++) { 6710 isp_prt(isp, ISP_LOGERR, 6711 "dump area for RISC registers and SRAM already used"); 6712 return; 6713 } 6714 ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE); 6715 for (i = 0; i < 100; i++) { 6716 USEC_DELAY(100); 6717 if (ISP_READ(isp, HCCR) & HCCR_PAUSE) { 6718 break; 6719 } 6720 } 6721 if (ISP_READ(isp, HCCR) & HCCR_PAUSE) { 6722 /* 6723 * PBIU registers 6724 */ 6725 for (i = 0; i < 8; i++) { 6726 *ptr++ = ISP_READ(isp, BIU_BLOCK + (i << 1)); 6727 } 6728 6729 /* 6730 * ReqQ-RspQ-Risc2Host Status registers 6731 */ 6732 for (i = 0; i < 8; i++) { 6733 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x10 + (i << 1)); 6734 } 6735 6736 /* 6737 * Mailbox Registers 6738 */ 6739 for (i = 0; i < 32; i++) { 6740 *ptr++ = 6741 ISP_READ(isp, PCI_MBOX_REGS2300_OFF + (i << 1)); 6742 } 6743 6744 /* 6745 * Auto Request Response DMA registers 6746 */ 6747 ISP_WRITE(isp, BIU2100_CSR, 0x40); 6748 for (i = 0; i < 32; i++) { 6749 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6750 } 6751 6752 /* 6753 * DMA registers 6754 */ 6755 ISP_WRITE(isp, BIU2100_CSR, 0x50); 6756 for (i = 0; i < 48; i++) { 6757 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6758 } 6759 6760 /* 6761 * RISC hardware registers 6762 */ 6763 ISP_WRITE(isp, BIU2100_CSR, 0); 6764 for (i = 0; i < 16; i++) { 6765 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0xA0 + (i << 1)); 6766 } 6767 6768 /* 6769 * RISC GP? registers 6770 */ 6771 for (j = 0; j < 8; j++) { 6772 ISP_WRITE(isp, BIU_BLOCK + 0xA4, 0x2000 + (j << 9)); 6773 for (i = 0; i < 16; i++) { 6774 *ptr++ = 6775 ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6776 } 6777 } 6778 6779 /* 6780 * frame buffer hardware registers 6781 */ 6782 ISP_WRITE(isp, BIU2100_CSR, 0x10); 6783 for (i = 0; i < 64; i++) { 6784 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6785 } 6786 6787 /* 6788 * FPM B0 hardware registers 6789 */ 6790 ISP_WRITE(isp, BIU2100_CSR, 0x20); 6791 for (i = 0; i < 64; i++) { 6792 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6793 } 6794 6795 /* 6796 * FPM B1 hardware registers 6797 */ 6798 ISP_WRITE(isp, BIU2100_CSR, 0x30); 6799 for (i = 0; i < 64; i++) { 6800 *ptr++ = ISP_READ(isp, BIU_BLOCK + 0x80 + (i << 1)); 6801 } 6802 } else { 6803 isp_prt(isp, ISP_LOGERR, "RISC Would Not Pause"); 6804 return; 6805 } 6806 isp_prt(isp, ISP_LOGALL, 6807 "isp_fw_dump: RISC registers dumped successfully"); 6808 ISP_WRITE(isp, BIU2100_CSR, BIU2100_SOFT_RESET); 6809 for (i = 0; i < 100; i++) { 6810 USEC_DELAY(100); 6811 if (ISP_READ(isp, OUTMAILBOX0) == 0) { 6812 break; 6813 } 6814 } 6815 if (ISP_READ(isp, OUTMAILBOX0) != 0) { 6816 isp_prt(isp, ISP_LOGERR, "Board Would Not Reset"); 6817 return; 6818 } 6819 ENABLE_INTS(isp); 6820 mbs.param[0] = MBOX_READ_RAM_WORD; 6821 mbs.param[1] = 0x800; 6822 isp->isp_mbxworkp = (void *) ptr; 6823 isp->isp_mbxwrk0 = 0xf7ff; /* continuation count */ 6824 isp->isp_mbxwrk1 = 0x801; /* next SRAM address */ 6825 isp_control(isp, ISPCTL_RUN_MBOXCMD, &mbs); 6826 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 6827 isp_prt(isp, ISP_LOGWARN, 6828 "RAM DUMP FAILED @ WORD %x", isp->isp_mbxwrk1); 6829 return; 6830 } 6831 ptr = isp->isp_mbxworkp; /* finish fetch of final word */ 6832 *ptr++ = isp->isp_mboxtmp[2]; 6833 6834 /* 6835 * We don't have access to mailbox registers 8.. onward 6836 * in our 'common' device model- so we have to set it 6837 * here and hope it stays the same! 6838 */ 6839 ISP_WRITE(isp, PCI_MBOX_REGS2300_OFF + (8 << 1), 0x1); 6840 6841 mbs.param[0] = MBOX_READ_RAM_WORD_EXTENDED; 6842 mbs.param[1] = 0; 6843 isp->isp_mbxworkp = (void *) ptr; 6844 isp->isp_mbxwrk0 = 0xffff; /* continuation count */ 6845 isp->isp_mbxwrk1 = 0x1; /* next SRAM address */ 6846 isp_control(isp, ISPCTL_RUN_MBOXCMD, &mbs); 6847 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 6848 isp_prt(isp, ISP_LOGWARN, 6849 "RAM DUMP FAILED @ WORD %x", 0x10000 + isp->isp_mbxwrk1); 6850 return; 6851 } 6852 ptr = isp->isp_mbxworkp; /* finish final word */ 6853 *ptr++ = mbs.param[2]; 6854 isp_prt(isp, ISP_LOGALL, "isp_fw_dump: SRAM dumped successfully"); 6855 FCPARAM(isp)->isp_dump_data[0] = isp->isp_type; /* now used */ 6856 (void) isp_async(isp, ISPASYNC_FW_DUMPED, 0); 6857} 6858 6859void 6860isp_fw_dump(struct ispsoftc *isp) 6861{ 6862 if (IS_2200(isp)) 6863 isp2200_fw_dump(isp); 6864 else if (IS_23XX(isp)) 6865 isp2300_fw_dump(isp); 6866} 6867#endif 6868