scif_controller.h revision 285830
1/*- 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 41 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 42 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 43 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 44 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 46 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 47 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 48 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 49 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 50 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 51 * 52 * $FreeBSD: releng/10.2/sys/dev/isci/scil/scif_controller.h 231136 2012-02-07 17:43:58Z jimharris $ 53 */ 54#ifndef _SCIF_CONTROLLER_H_ 55#define _SCIF_CONTROLLER_H_ 56 57/** 58 * @file 59 * 60 * @brief This file contains all of the interface methods that can be called 61 * by an SCIF user on a SCIF controller object. 62 */ 63 64#ifdef __cplusplus 65extern "C" { 66#endif // __cplusplus 67 68#include <dev/isci/scil/sci_types.h> 69#include <dev/isci/scil/sci_status.h> 70 71 72/** 73 * @brief This method will attempt to construct a framework controller object 74 * utilizing the supplied parameter information. 75 * 76 * @param[in] library This parameter specifies the handle to the framework 77 * library object associated with the controller being constructed. 78 * @param[in] controller This parameter specifies the framework controller to 79 * be constructed. 80 * @param[in] user_object This parameter is a reference to the SCIL users 81 * controller object and will be used to associate with the 82 * framework controller. 83 * 84 * @return Indicate if the controller was successfully constructed or if 85 * it failed in some way. 86 * @retval SCI_SUCCESS This value is returned if the controller was 87 * successfully constructed. 88 * @retval SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned 89 * if the controller does not support the supplied oem parameter 90 * data version. 91 * @retval SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This value is returned 92 * if the controller doesn't support the port configuration scheme 93 * (APC or MPC). 94 */ 95SCI_STATUS scif_controller_construct( 96 SCI_LIBRARY_HANDLE_T library, 97 SCI_CONTROLLER_HANDLE_T controller, 98 void * user_object 99); 100 101/** 102 * @brief This method will initialize the SCI Framework controller object. 103 * This includes initialization of the associated core controller. 104 * 105 * @param[in] controller This parameter specifies the controller to be 106 * initialized. 107 * 108 * @return Indicate if the controller was successfully initialized or if 109 * it failed in some way. 110 * @retval SCI_SUCCESS This value is returned if the controller hardware 111 * was successfully initialized. 112 */ 113SCI_STATUS scif_controller_initialize( 114 SCI_CONTROLLER_HANDLE_T controller 115); 116 117/** 118 * @brief This method returns the suggested scif_controller_start() 119 * timeout amount. The user is free to use any timeout value, 120 * but this method provides the suggested minimum start timeout 121 * value. The returned value is based upon empirical information 122 * determined as a result of interoperability testing. 123 * 124 * @param[in] controller the handle to the controller object for which 125 * to return the suggested start timeout. 126 * 127 * @return This method returns the number of milliseconds for the 128 * suggested start operation timeout. 129 */ 130U32 scif_controller_get_suggested_start_timeout( 131 SCI_CONTROLLER_HANDLE_T controller 132); 133 134/** 135 * @brief This method will start the SCIF controller. The SCI User completion 136 * callback is called when the following conditions are met: 137 * -# the return status of this method is SCI_SUCCESS. 138 * -# after all of the phys have successfully started or been given 139 * the opportunity to start. 140 * 141 * @pre The controller must be in the INITIALIZED or STARTED state. 142 * 143 * @param[in] controller the handle to the controller object to start. 144 * @param[in] timeout This parameter specifies the number of milliseconds 145 * in which the start operation should complete. 146 * 147 * @return Indicate if the controller start method succeeded or failed in 148 * some way. 149 * @retval SCI_SUCCESS if the start operation succeeded. 150 * @retval SCI_WARNING_ALREADY_IN_STATE if the controller is already in 151 * the STARTED state. 152 * @retval SCI_FAILURE_INVALID_STATE if the controller is not either in 153 * the INITIALIZED or STARTED states. 154 * @retval SCI_FAILURE_INVALID_MEMORY_DESCRIPTOR if there are 155 * inconsistent or invalid values in the supplied 156 * SCI_PHYSICAL_MEMORY_DESCRIPTOR array. 157 * @retval SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This value is 158 * returned if the phy to port allocation cannot be supported. 159 * 160 * @see For additional information please refer to: scic_controller_start() 161 */ 162SCI_STATUS scif_controller_start( 163 SCI_CONTROLLER_HANDLE_T controller, 164 U32 timeout 165); 166 167/** 168 * @brief This method will stop an individual framework controller object. This 169 * includes quiescing IOs, releasing affiliations, and other shutdown 170 * related operations. This method will invoke the associated user 171 * callback upon completion. The completion callback is called when 172 * the following conditions are met: 173 * -# the method return status is SCI_SUCCESS. 174 * -# the controller has been quiesced. 175 * This method will ensure that all framework IO requests are quiesced 176 * and any additional framework operations are halted. 177 * 178 * @pre The controller must be in the STARTED or STOPPED state. 179 * 180 * @param[in] controller the handle to the controller object to stop. 181 * @param[in] timeout This parameter specifies the number of milliseconds 182 * in which the stop operation should complete. 183 * 184 * @return Indicate if the controller stop method succeeded or failed in 185 * some way. 186 * @retval SCI_SUCCESS if the stop operation successfully began. 187 * @retval SCI_WARNING_ALREADY_IN_STATE if the controller is already in 188 * the STOPPED state. 189 * @retval SCI_FAILURE_INVALID_STATE if the controller is not either in 190 * the STARTED or STOPPED states. 191 * 192 * @see For additional information please refer to: scic_controller_stop() 193 */ 194SCI_STATUS scif_controller_stop( 195 SCI_CONTROLLER_HANDLE_T controller, 196 U32 timeout 197); 198 199/** 200 * @brief This method will reset the supplied framework controller regardless 201 * of the state of said controller. This operation is considered 202 * destructive. Outstanding IO requests are not aborted or completed 203 * at the actual remote device. However, the framework will 204 * manufacture completion callbacks to the OS driver for the IO 205 * requests. 206 * 207 * @param[in] controller the handle to the controller object to reset. 208 * 209 * @return Indicate if the controller reset method succeeded or failed in 210 * some way. 211 * @retval SCI_SUCCESS if the reset operation successfully started. 212 * @retval SCI_FATAL_ERROR if the controller reset operation is unable to 213 * complete. 214 * 215 * @see For additional information please refer to: scic_controller_reset() 216 */ 217SCI_STATUS scif_controller_reset( 218 SCI_CONTROLLER_HANDLE_T controller 219); 220 221/** 222 * @brief This method returns the SCI Core controller handle associated 223 * with this controller. 224 * 225 * @param[in] scif_controller the handle to the controller object for which 226 * to retrieve the core specific controller handle 227 * 228 * @return Return the SCI core controller handle associated with the supplied 229 * framework controller. 230 */ 231SCI_CONTROLLER_HANDLE_T scif_controller_get_scic_handle( 232 SCI_CONTROLLER_HANDLE_T scif_controller 233); 234 235/** 236 * @brief This method is called by the SCIF user to send/start a framework 237 * IO request. 238 * 239 * @param[in] controller the handle to the controller object for which 240 * to start an IO request. 241 * @param[in] remote_device the handle to the remote device object for which 242 * to start an IO request. 243 * @param[in] io_request the handle to the io request object to start. 244 * @param[in] io_tag This parameter specifies a previously allocated IO tag 245 * that the user desires to be utilized for this request. 246 * This parameter is optional. The user is allowed to supply 247 * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. 248 * @see scic_controller_allocate_tag() for more information 249 * on allocating a tag. 250 * 251 * @return Indicate if the controller successfully started the IO request. 252 * @retval SCI_IO_SUCCESS if the IO request was successfully started. 253 * 254 * @see For additional information please refer to: scic_controller_start_io() 255 * 256 * @todo Determine the failure situations and return values. 257 */ 258SCI_IO_STATUS scif_controller_start_io( 259 SCI_CONTROLLER_HANDLE_T controller, 260 SCI_REMOTE_DEVICE_HANDLE_T remote_device, 261 SCI_IO_REQUEST_HANDLE_T io_request, 262 U16 io_tag 263); 264 265/** 266 * @brief This method is called by the SCIF user to send/start a framework 267 * task management request. 268 * 269 * @param[in] controller the handle to the controller object for which 270 * to start the task management request. 271 * @param[in] remote_device the handle to the remote device object for which 272 * to start the task management request. 273 * @param[in] task_request the handle to the task request object to start. 274 * @param[in] io_tag This parameter specifies a previously allocated IO tag 275 * that the user desires to be utilized for this request. Note 276 * this not the io_tag of the request being managed. It is to 277 * be utilized for the task request itself. 278 * This parameter is optional. The user is allowed to supply 279 * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. 280 * @see scic_controller_allocate_tag() for more information 281 * on allocating a tag. 282 * 283 * @return Indicate if the controller successfully started the IO request. 284 * @retval SCI_TASK_SUCCESS if the task request was successfully started. 285 * 286 * @see For additional information please refer to: scic_controller_start_task() 287 * 288 * @todo Determine the failure situations and return values. 289 */ 290SCI_TASK_STATUS scif_controller_start_task( 291 SCI_CONTROLLER_HANDLE_T controller, 292 SCI_REMOTE_DEVICE_HANDLE_T remote_device, 293 SCI_TASK_REQUEST_HANDLE_T task_request, 294 U16 io_tag 295); 296 297/** 298 * @brief This method is called by the SCI user to complete a previously 299 * started IO request. After this method is invoked, the user should 300 * consider the IO request as invalid until it is properly reused 301 * (i.e. re-constructed). 302 * 303 * @param[in] controller The handle to the controller object for which 304 * to complete the IO request. 305 * @param[in] remote_device The handle to the remote device object for which 306 * to complete the IO request. 307 * @param[in] io_request the handle to the io request object to complete. 308 * 309 * @return Indicate if the controller successfully completed the IO request. 310 * @retval SCI_SUCCESS if the completion process was successful. 311 * 312 * @see For additional information please refer to: 313 * scic_controller_complete_io() 314 */ 315SCI_STATUS scif_controller_complete_io( 316 SCI_CONTROLLER_HANDLE_T controller, 317 SCI_REMOTE_DEVICE_HANDLE_T remote_device, 318 SCI_IO_REQUEST_HANDLE_T io_request 319); 320 321/** 322 * @brief This method will perform framework specific completion operations for 323 * a task management request. After this method is invoked, the user 324 * should consider the task request as invalid until it is properly 325 * reused (i.e. re-constructed). 326 * 327 * @param[in] controller The handle to the controller object for which 328 * to complete the task management request. 329 * @param[in] remote_device The handle to the remote device object for which 330 * to complete the task management request. 331 * @param[in] task_request the handle to the task management request object 332 * to complete. 333 * 334 * @return Indicate if the controller successfully completed the task 335 * management request. 336 * @retval SCI_SUCCESS if the completion process was successful. 337 */ 338SCI_STATUS scif_controller_complete_task( 339 SCI_CONTROLLER_HANDLE_T controller, 340 SCI_REMOTE_DEVICE_HANDLE_T remote_device, 341 SCI_TASK_REQUEST_HANDLE_T task_request 342); 343 344/** 345 * @brief This method simply provides the user with a unique handle for a 346 * given SAS/SATA domain index. 347 * 348 * @param[in] controller This parameter represents the handle to the 349 * controller object from which to retrieve a domain (SAS or 350 * SATA) handle. 351 * @param[in] port_index This parameter specifies the domain index in 352 * the controller for which to retrieve the domain handle. 353 * @note 0 <= port_index < maximum number of phys. 354 * @param[out] domain_handle This parameter specifies the retrieved domain 355 * handle to be provided to the caller. 356 * 357 * @return Indicate if the retrieval of the domain handle was successful. 358 * @retval SCI_SUCCESS This value is returned if the retrieval was successful. 359 * @retval SCI_FAILURE_INVALID_PORT This value is returned if the supplied 360 * port index is not invalid. 361 */ 362SCI_STATUS scif_controller_get_domain_handle( 363 SCI_CONTROLLER_HANDLE_T controller, 364 U8 port_index, 365 SCI_DOMAIN_HANDLE_T * domain_handle 366); 367 368/** 369 * @brief This method allows the user to configure the SCI Framework 370 * into either a performance mode or a memory savings mode. 371 * 372 * @param[in] controller This parameter represents the handle to the 373 * controller object for which to update the operating 374 * mode. 375 * @param[in] mode This parameter specifies the new mode for the 376 * controller. 377 * 378 * @return Indicate if the user successfully change the operating mode 379 * of the controller. 380 * @retval SCI_SUCCESS The user successfully updated the mode. 381 */ 382SCI_STATUS scif_controller_set_mode( 383 SCI_CONTROLLER_HANDLE_T controller, 384 SCI_CONTROLLER_MODE mode 385); 386 387/** 388 * @brief This method simply returns the T10 SCSI to ATA Translation (SAT) 389 * specification version to which this translator is compliant for 390 * supported commands. 391 * 392 * @return An integer value indicating the SAT version to which this 393 * translator complies. 394 */ 395U32 scif_controller_get_sat_compliance_version( 396 void 397); 398 399/** 400 * @brief This method simply returns the revision of the T10 SCSI to ATA 401 * Translation (SAT) specification version to which this translator 402 * is compliant for supported commands. 403 * 404 * @return An integer value indicating the revision of the SAT version 405 * to which this translator complies. 406 */ 407U32 scif_controller_get_sat_compliance_version_revision( 408 void 409); 410 411/** 412 * @brief This method is called by the SCI user to start internal io. 413 */ 414typedef void (*SCI_START_INTERNAL_IO_ROUTINE)( 415 SCI_CONTROLLER_HANDLE_T controller 416); 417 418#if !defined(DISABLE_INTERRUPTS) 419/** 420 * @brief This method allows the user to configure the interrupt coalescence. 421 * Please refer to the comment header for 422 * scic_controller_set_interrupt_coalescence() to find details. 423 */ 424SCI_STATUS scif_controller_set_interrupt_coalescence( 425 SCI_CONTROLLER_HANDLE_T controller, 426 U32 coalesce_number, 427 U32 coalesce_timeout 428); 429 430/** 431 * @brief This method retrieves the interrupt coalescence information. 432 * Please refer to the comment header for 433 * scic_controller_get_interrupt_coalescence() to find details. 434 */ 435void scif_controller_get_interrupt_coalescence( 436 SCI_CONTROLLER_HANDLE_T controller, 437 U32 * coalesce_number, 438 U32 * coalesce_timeout 439); 440 441#else // !defined(DISABLE_INTERRUPTS) 442 443#define scif_controller_set_interrupt_coalescence(controller, num, timeout) \ 444 SCI_FAILURE 445#define scif_controller_get_interrupt_coalescence(controller, num, timeout) 446 447#endif // !defined(DISABLE_INTERRUPTS) 448 449#ifdef __cplusplus 450} 451#endif // __cplusplus 452 453#endif // _SCIF_CONTROLLER_H_ 454 455