if_dcreg.h revision 123166
1/* 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: head/sys/dev/dc/if_dcreg.h 123166 2003-12-06 02:29:31Z sanpei $ 33 */ 34 35/* 36 * 21143 and clone common register definitions. 37 */ 38 39#define DC_BUSCTL 0x00 /* bus control */ 40#define DC_TXSTART 0x08 /* tx start demand */ 41#define DC_RXSTART 0x10 /* rx start demand */ 42#define DC_RXADDR 0x18 /* rx descriptor list start addr */ 43#define DC_TXADDR 0x20 /* tx descriptor list start addr */ 44#define DC_ISR 0x28 /* interrupt status register */ 45#define DC_NETCFG 0x30 /* network config register */ 46#define DC_IMR 0x38 /* interrupt mask */ 47#define DC_FRAMESDISCARDED 0x40 /* # of discarded frames */ 48#define DC_SIO 0x48 /* MII and ROM/EEPROM access */ 49#define DC_ROM 0x50 /* ROM programming address */ 50#define DC_TIMER 0x58 /* general timer */ 51#define DC_10BTSTAT 0x60 /* SIA status */ 52#define DC_SIARESET 0x68 /* SIA connectivity */ 53#define DC_10BTCTRL 0x70 /* SIA transmit and receive */ 54#define DC_WATCHDOG 0x78 /* SIA and general purpose port */ 55#define DC_SIAGP 0x78 /* SIA and general purpose port (X3201) */ 56 57/* 58 * There are two general 'types' of MX chips that we need to be 59 * concerned with. One is the original 98713, which has its internal 60 * NWAY support controlled via the MDIO bits in the serial I/O 61 * register. The other is everything else (from the 98713A on up), 62 * which has its internal NWAY controlled via CSR13, CSR14 and CSR15, 63 * just like the 21143. This type setting also governs which of the 64 * 'magic' numbers we write to CSR16. The PNIC II falls into the 65 * 98713A/98715/98715A/98725 category. 66 */ 67#define DC_TYPE_98713 0x1 68#define DC_TYPE_98713A 0x2 69#define DC_TYPE_987x5 0x3 70 71/* Other type of supported chips. */ 72#define DC_TYPE_21143 0x4 /* Intel 21143 */ 73#define DC_TYPE_ASIX 0x5 /* ASIX AX88140A/AX88141 */ 74#define DC_TYPE_AL981 0x6 /* ADMtek AL981 Comet */ 75#define DC_TYPE_AN985 0x7 /* ADMtek AN985 Centaur */ 76#define DC_TYPE_DM9102 0x8 /* Davicom DM9102 */ 77#define DC_TYPE_PNICII 0x9 /* 82c115 PNIC II */ 78#define DC_TYPE_PNIC 0xA /* 82c168/82c169 PNIC I */ 79#define DC_TYPE_XIRCOM 0xB /* Xircom X3201 */ 80#define DC_TYPE_CONEXANT 0xC /* Conexant LANfinity RS7112 */ 81 82#define DC_IS_MACRONIX(x) \ 83 (x->dc_type == DC_TYPE_98713 || \ 84 x->dc_type == DC_TYPE_98713A || \ 85 x->dc_type == DC_TYPE_987x5) 86 87#define DC_IS_ADMTEK(x) \ 88 (x->dc_type == DC_TYPE_AL981 || \ 89 x->dc_type == DC_TYPE_AN985) 90 91#define DC_IS_INTEL(x) (x->dc_type == DC_TYPE_21143) 92#define DC_IS_ASIX(x) (x->dc_type == DC_TYPE_ASIX) 93#define DC_IS_COMET(x) (x->dc_type == DC_TYPE_AL981) 94#define DC_IS_CENTAUR(x) (x->dc_type == DC_TYPE_AN985) 95#define DC_IS_DAVICOM(x) (x->dc_type == DC_TYPE_DM9102) 96#define DC_IS_PNICII(x) (x->dc_type == DC_TYPE_PNICII) 97#define DC_IS_PNIC(x) (x->dc_type == DC_TYPE_PNIC) 98#define DC_IS_XIRCOM(x) (x->dc_type == DC_TYPE_XIRCOM) 99#define DC_IS_CONEXANT(x) (x->dc_type == DC_TYPE_CONEXANT) 100 101/* MII/symbol mode port types */ 102#define DC_PMODE_MII 0x1 103#define DC_PMODE_SYM 0x2 104#define DC_PMODE_SIA 0x3 105 106/* 107 * Bus control bits. 108 */ 109#define DC_BUSCTL_RESET 0x00000001 110#define DC_BUSCTL_ARBITRATION 0x00000002 111#define DC_BUSCTL_SKIPLEN 0x0000007C 112#define DC_BUSCTL_BUF_BIGENDIAN 0x00000080 113#define DC_BUSCTL_BURSTLEN 0x00003F00 114#define DC_BUSCTL_CACHEALIGN 0x0000C000 115#define DC_BUSCTL_TXPOLL 0x000E0000 116#define DC_BUSCTL_DBO 0x00100000 117#define DC_BUSCTL_MRME 0x00200000 118#define DC_BUSCTL_MRLE 0x00800000 119#define DC_BUSCTL_MWIE 0x01000000 120#define DC_BUSCTL_ONNOW_ENB 0x04000000 121 122#define DC_SKIPLEN_1LONG 0x00000004 123#define DC_SKIPLEN_2LONG 0x00000008 124#define DC_SKIPLEN_3LONG 0x00000010 125#define DC_SKIPLEN_4LONG 0x00000020 126#define DC_SKIPLEN_5LONG 0x00000040 127 128#define DC_CACHEALIGN_NONE 0x00000000 129#define DC_CACHEALIGN_8LONG 0x00004000 130#define DC_CACHEALIGN_16LONG 0x00008000 131#define DC_CACHEALIGN_32LONG 0x0000C000 132 133#define DC_BURSTLEN_USECA 0x00000000 134#define DC_BURSTLEN_1LONG 0x00000100 135#define DC_BURSTLEN_2LONG 0x00000200 136#define DC_BURSTLEN_4LONG 0x00000400 137#define DC_BURSTLEN_8LONG 0x00000800 138#define DC_BURSTLEN_16LONG 0x00001000 139#define DC_BURSTLEN_32LONG 0x00002000 140 141#define DC_TXPOLL_OFF 0x00000000 142#define DC_TXPOLL_1 0x00020000 143#define DC_TXPOLL_2 0x00040000 144#define DC_TXPOLL_3 0x00060000 145#define DC_TXPOLL_4 0x00080000 146#define DC_TXPOLL_5 0x000A0000 147#define DC_TXPOLL_6 0x000C0000 148#define DC_TXPOLL_7 0x000E0000 149 150/* 151 * Interrupt status bits. 152 */ 153#define DC_ISR_TX_OK 0x00000001 154#define DC_ISR_TX_IDLE 0x00000002 155#define DC_ISR_TX_NOBUF 0x00000004 156#define DC_ISR_TX_JABBERTIMEO 0x00000008 157#define DC_ISR_LINKGOOD 0x00000010 158#define DC_ISR_TX_UNDERRUN 0x00000020 159#define DC_ISR_RX_OK 0x00000040 160#define DC_ISR_RX_NOBUF 0x00000080 161#define DC_ISR_RX_READ 0x00000100 162#define DC_ISR_RX_WATDOGTIMEO 0x00000200 163#define DC_ISR_TX_EARLY 0x00000400 164#define DC_ISR_TIMER_EXPIRED 0x00000800 165#define DC_ISR_LINKFAIL 0x00001000 166#define DC_ISR_BUS_ERR 0x00002000 167#define DC_ISR_RX_EARLY 0x00004000 168#define DC_ISR_ABNORMAL 0x00008000 169#define DC_ISR_NORMAL 0x00010000 170#define DC_ISR_RX_STATE 0x000E0000 171#define DC_ISR_TX_STATE 0x00700000 172#define DC_ISR_BUSERRTYPE 0x03800000 173#define DC_ISR_100MBPSLINK 0x08000000 174#define DC_ISR_MAGICKPACK 0x10000000 175 176#define DC_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */ 177#define DC_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */ 178#define DC_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */ 179#define DC_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */ 180#define DC_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */ 181#define DC_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */ 182#define DC_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */ 183#define DC_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */ 184 185#define DC_TXSTATE_RESET 0x00000000 /* 000 - reset */ 186#define DC_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */ 187#define DC_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */ 188#define DC_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */ 189#define DC_TXSTATE_RSVD 0x00400000 /* 100 - reserved */ 190#define DC_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */ 191#define DC_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */ 192#define DC_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */ 193 194/* 195 * Network config bits. 196 */ 197#define DC_NETCFG_RX_HASHPERF 0x00000001 198#define DC_NETCFG_RX_ON 0x00000002 199#define DC_NETCFG_RX_HASHONLY 0x00000004 200#define DC_NETCFG_RX_BADFRAMES 0x00000008 201#define DC_NETCFG_RX_INVFILT 0x00000010 202#define DC_NETCFG_BACKOFFCNT 0x00000020 203#define DC_NETCFG_RX_PROMISC 0x00000040 204#define DC_NETCFG_RX_ALLMULTI 0x00000080 205#define DC_NETCFG_FULLDUPLEX 0x00000200 206#define DC_NETCFG_LOOPBACK 0x00000C00 207#define DC_NETCFG_FORCECOLL 0x00001000 208#define DC_NETCFG_TX_ON 0x00002000 209#define DC_NETCFG_TX_THRESH 0x0000C000 210#define DC_NETCFG_TX_BACKOFF 0x00020000 211#define DC_NETCFG_PORTSEL 0x00040000 /* 0 == 10, 1 == 100 */ 212#define DC_NETCFG_HEARTBEAT 0x00080000 213#define DC_NETCFG_STORENFWD 0x00200000 214#define DC_NETCFG_SPEEDSEL 0x00400000 /* 1 == 10, 0 == 100 */ 215#define DC_NETCFG_PCS 0x00800000 216#define DC_NETCFG_SCRAMBLER 0x01000000 217#define DC_NETCFG_NO_RXCRC 0x02000000 218#define DC_NETCFG_RX_ALL 0x40000000 219#define DC_NETCFG_CAPEFFECT 0x80000000 220 221#define DC_OPMODE_NORM 0x00000000 222#define DC_OPMODE_INTLOOP 0x00000400 223#define DC_OPMODE_EXTLOOP 0x00000800 224 225#if 0 226#define DC_TXTHRESH_72BYTES 0x00000000 227#define DC_TXTHRESH_96BYTES 0x00004000 228#define DC_TXTHRESH_128BYTES 0x00008000 229#define DC_TXTHRESH_160BYTES 0x0000C000 230#endif 231 232#define DC_TXTHRESH_MIN 0x00000000 233#define DC_TXTHRESH_INC 0x00004000 234#define DC_TXTHRESH_MAX 0x0000C000 235 236 237/* 238 * Interrupt mask bits. 239 */ 240#define DC_IMR_TX_OK 0x00000001 241#define DC_IMR_TX_IDLE 0x00000002 242#define DC_IMR_TX_NOBUF 0x00000004 243#define DC_IMR_TX_JABBERTIMEO 0x00000008 244#define DC_IMR_LINKGOOD 0x00000010 245#define DC_IMR_TX_UNDERRUN 0x00000020 246#define DC_IMR_RX_OK 0x00000040 247#define DC_IMR_RX_NOBUF 0x00000080 248#define DC_IMR_RX_READ 0x00000100 249#define DC_IMR_RX_WATDOGTIMEO 0x00000200 250#define DC_IMR_TX_EARLY 0x00000400 251#define DC_IMR_TIMER_EXPIRED 0x00000800 252#define DC_IMR_LINKFAIL 0x00001000 253#define DC_IMR_BUS_ERR 0x00002000 254#define DC_IMR_RX_EARLY 0x00004000 255#define DC_IMR_ABNORMAL 0x00008000 256#define DC_IMR_NORMAL 0x00010000 257#define DC_IMR_100MBPSLINK 0x08000000 258#define DC_IMR_MAGICKPACK 0x10000000 259 260#define DC_INTRS \ 261 (DC_IMR_RX_OK|DC_IMR_TX_OK|DC_IMR_RX_NOBUF|DC_IMR_RX_WATDOGTIMEO|\ 262 DC_IMR_TX_NOBUF|DC_IMR_TX_UNDERRUN|DC_IMR_BUS_ERR| \ 263 DC_IMR_ABNORMAL|DC_IMR_NORMAL/*|DC_IMR_TX_EARLY*/) 264/* 265 * Serial I/O (EEPROM/ROM) bits. 266 */ 267#define DC_SIO_EE_CS 0x00000001 /* EEPROM chip select */ 268#define DC_SIO_EE_CLK 0x00000002 /* EEPROM clock */ 269#define DC_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */ 270#define DC_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */ 271#define DC_SIO_ROMDATA4 0x00000010 272#define DC_SIO_ROMDATA5 0x00000020 273#define DC_SIO_ROMDATA6 0x00000040 274#define DC_SIO_ROMDATA7 0x00000080 275#define DC_SIO_EESEL 0x00000800 276#define DC_SIO_ROMSEL 0x00001000 277#define DC_SIO_ROMCTL_WRITE 0x00002000 278#define DC_SIO_ROMCTL_READ 0x00004000 279#define DC_SIO_MII_CLK 0x00010000 /* MDIO clock */ 280#define DC_SIO_MII_DATAOUT 0x00020000 /* MDIO data out */ 281#define DC_SIO_MII_DIR 0x00040000 /* MDIO dir */ 282#define DC_SIO_MII_DATAIN 0x00080000 /* MDIO data in */ 283 284#define DC_EECMD_WRITE 0x140 285#define DC_EECMD_READ 0x180 286#define DC_EECMD_ERASE 0x1c0 287 288#define DC_EE_NODEADDR_OFFSET 0x70 289#define DC_EE_NODEADDR 10 290 291/* 292 * General purpose timer register 293 */ 294#define DC_TIMER_VALUE 0x0000FFFF 295#define DC_TIMER_CONTINUOUS 0x00010000 296 297/* 298 * 10baseT status register 299 */ 300#define DC_TSTAT_MIIACT 0x00000001 /* MII port activity */ 301#define DC_TSTAT_LS100 0x00000002 /* link status of 100baseTX */ 302#define DC_TSTAT_LS10 0x00000004 /* link status of 10baseT */ 303#define DC_TSTAT_AUTOPOLARITY 0x00000008 304#define DC_TSTAT_AUIACT 0x00000100 /* AUI activity */ 305#define DC_TSTAT_10BTACT 0x00000200 /* 10baseT activity */ 306#define DC_TSTAT_NSN 0x00000400 /* non-stable FLPs detected */ 307#define DC_TSTAT_REMFAULT 0x00000800 308#define DC_TSTAT_ANEGSTAT 0x00007000 309#define DC_TSTAT_LP_CAN_NWAY 0x00008000 /* link partner supports NWAY */ 310#define DC_TSTAT_LPCODEWORD 0xFFFF0000 /* link partner's code word */ 311 312#define DC_ASTAT_DISABLE 0x00000000 313#define DC_ASTAT_TXDISABLE 0x00001000 314#define DC_ASTAT_ABDETECT 0x00002000 315#define DC_ASTAT_ACKDETECT 0x00003000 316#define DC_ASTAT_CMPACKDETECT 0x00004000 317#define DC_ASTAT_AUTONEGCMP 0x00005000 318#define DC_ASTAT_LINKCHECK 0x00006000 319 320/* 321 * PHY reset register 322 */ 323#define DC_SIA_RESET 0x00000001 324#define DC_SIA_AUI 0x00000008 /* AUI or 10baseT */ 325 326/* 327 * 10baseT control register 328 */ 329#define DC_TCTL_ENCODER_ENB 0x00000001 330#define DC_TCTL_LOOPBACK 0x00000002 331#define DC_TCTL_DRIVER_ENB 0x00000004 332#define DC_TCTL_LNKPULSE_ENB 0x00000008 333#define DC_TCTL_HALFDUPLEX 0x00000040 334#define DC_TCTL_AUTONEGENBL 0x00000080 335#define DC_TCTL_RX_SQUELCH 0x00000100 336#define DC_TCTL_COLL_SQUELCH 0x00000200 337#define DC_TCTL_COLL_DETECT 0x00000400 338#define DC_TCTL_SQE_ENB 0x00000800 339#define DC_TCTL_LINKTEST 0x00001000 340#define DC_TCTL_AUTOPOLARITY 0x00002000 341#define DC_TCTL_SET_POL_PLUS 0x00004000 342#define DC_TCTL_AUTOSENSE 0x00008000 /* 10bt/AUI autosense */ 343#define DC_TCTL_100BTXHALF 0x00010000 344#define DC_TCTL_100BTXFULL 0x00020000 345#define DC_TCTL_100BT4 0x00040000 346 347/* 348 * Watchdog timer register 349 */ 350#define DC_WDOG_JABBERDIS 0x00000001 351#define DC_WDOG_HOSTUNJAB 0x00000002 352#define DC_WDOG_JABBERCLK 0x00000004 353#define DC_WDOG_RXWDOGDIS 0x00000010 354#define DC_WDOG_RXWDOGCLK 0x00000020 355#define DC_WDOG_MUSTBEZERO 0x00000100 356#define DC_WDOG_AUIBNC 0x00100000 357#define DC_WDOG_ACTIVITY 0x00200000 358#define DC_WDOG_RX_MATCH 0x00400000 359#define DC_WDOG_LINK 0x00800000 360#define DC_WDOG_CTLWREN 0x08000000 361 362/* 363 * SIA and General Purpose Port register (X3201) 364 */ 365#define DC_SIAGP_RXMATCH 0x40000000 366#define DC_SIAGP_INT1 0x20000000 367#define DC_SIAGP_INT0 0x10000000 368#define DC_SIAGP_WRITE_EN 0x08000000 369#define DC_SIAGP_RXMATCH_EN 0x04000000 370#define DC_SIAGP_INT1_EN 0x02000000 371#define DC_SIAGP_INT0_EN 0x01000000 372#define DC_SIAGP_LED3 0x00800000 373#define DC_SIAGP_LED2 0x00400000 374#define DC_SIAGP_LED1 0x00200000 375#define DC_SIAGP_LED0 0x00100000 376#define DC_SIAGP_MD_GP3_OUTPUT 0x00080000 377#define DC_SIAGP_MD_GP2_OUTPUT 0x00040000 378#define DC_SIAGP_MD_GP1_OUTPUT 0x00020000 379#define DC_SIAGP_MD_GP0_OUTPUT 0x00010000 380 381/* 382 * Size of a setup frame. 383 */ 384#define DC_SFRAME_LEN 192 385 386/* 387 * 21x4x TX/RX list structure. 388 */ 389 390struct dc_desc { 391 u_int32_t dc_status; 392 u_int32_t dc_ctl; 393 u_int32_t dc_ptr1; 394 u_int32_t dc_ptr2; 395}; 396 397#define dc_data dc_ptr1 398#define dc_next dc_ptr2 399 400#define DC_RXSTAT_FIFOOFLOW 0x00000001 401#define DC_RXSTAT_CRCERR 0x00000002 402#define DC_RXSTAT_DRIBBLE 0x00000004 403#define DC_RXSTAT_MIIERE 0x00000008 404#define DC_RXSTAT_WATCHDOG 0x00000010 405#define DC_RXSTAT_FRAMETYPE 0x00000020 /* 0 == IEEE 802.3 */ 406#define DC_RXSTAT_COLLSEEN 0x00000040 407#define DC_RXSTAT_GIANT 0x00000080 408#define DC_RXSTAT_LASTFRAG 0x00000100 409#define DC_RXSTAT_FIRSTFRAG 0x00000200 410#define DC_RXSTAT_MULTICAST 0x00000400 411#define DC_RXSTAT_RUNT 0x00000800 412#define DC_RXSTAT_RXTYPE 0x00003000 413#define DC_RXSTAT_DE 0x00004000 414#define DC_RXSTAT_RXERR 0x00008000 415#define DC_RXSTAT_RXLEN 0x3FFF0000 416#define DC_RXSTAT_OWN 0x80000000 417 418#define DC_RXBYTES(x) ((x & DC_RXSTAT_RXLEN) >> 16) 419#define DC_RXSTAT (DC_RXSTAT_FIRSTFRAG|DC_RXSTAT_LASTFRAG|DC_RXSTAT_OWN) 420 421#define DC_RXCTL_BUFLEN1 0x00000FFF 422#define DC_RXCTL_BUFLEN2 0x00FFF000 423#define DC_RXCTL_RLINK 0x01000000 424#define DC_RXCTL_RLAST 0x02000000 425 426#define DC_TXSTAT_DEFER 0x00000001 427#define DC_TXSTAT_UNDERRUN 0x00000002 428#define DC_TXSTAT_LINKFAIL 0x00000003 429#define DC_TXSTAT_COLLCNT 0x00000078 430#define DC_TXSTAT_SQE 0x00000080 431#define DC_TXSTAT_EXCESSCOLL 0x00000100 432#define DC_TXSTAT_LATECOLL 0x00000200 433#define DC_TXSTAT_NOCARRIER 0x00000400 434#define DC_TXSTAT_CARRLOST 0x00000800 435#define DC_TXSTAT_JABTIMEO 0x00004000 436#define DC_TXSTAT_ERRSUM 0x00008000 437#define DC_TXSTAT_OWN 0x80000000 438 439#define DC_TXCTL_BUFLEN1 0x000007FF 440#define DC_TXCTL_BUFLEN2 0x003FF800 441#define DC_TXCTL_FILTTYPE0 0x00400000 442#define DC_TXCTL_PAD 0x00800000 443#define DC_TXCTL_TLINK 0x01000000 444#define DC_TXCTL_TLAST 0x02000000 445#define DC_TXCTL_NOCRC 0x04000000 446#define DC_TXCTL_SETUP 0x08000000 447#define DC_TXCTL_FILTTYPE1 0x10000000 448#define DC_TXCTL_FIRSTFRAG 0x20000000 449#define DC_TXCTL_LASTFRAG 0x40000000 450#define DC_TXCTL_FINT 0x80000000 451 452#define DC_FILTER_PERFECT 0x00000000 453#define DC_FILTER_HASHPERF 0x00400000 454#define DC_FILTER_INVERSE 0x10000000 455#define DC_FILTER_HASHONLY 0x10400000 456 457#define DC_MAXFRAGS 16 458#ifdef DEVICE_POLLING 459#define DC_RX_LIST_CNT 192 460#else 461#define DC_RX_LIST_CNT 64 462#endif 463#define DC_TX_LIST_CNT 256 464#define DC_MIN_FRAMELEN 60 465#define DC_RXLEN 1536 466 467#define DC_INC(x, y) (x) = (x + 1) % y 468 469/* Macros to easily get the DMA address of a descriptor. */ 470#define DC_RXDESC(sc, i) (sc->dc_laddr + \ 471 (uintptr_t)(sc->dc_ldata->dc_rx_list + i) - (uintptr_t)sc->dc_ldata) 472#define DC_TXDESC(sc, i) (sc->dc_laddr + \ 473 (uintptr_t)(sc->dc_ldata->dc_tx_list + i) - (uintptr_t)sc->dc_ldata) 474 475#if BYTE_ORDER == BIG_ENDIAN 476#define DC_SP_MAC(x) ((x) << 16) 477#else 478#define DC_SP_MAC(x) (x) 479#endif 480 481struct dc_list_data { 482 struct dc_desc dc_rx_list[DC_RX_LIST_CNT]; 483 struct dc_desc dc_tx_list[DC_TX_LIST_CNT]; 484}; 485 486struct dc_chain_data { 487 struct mbuf *dc_rx_chain[DC_RX_LIST_CNT]; 488 struct mbuf *dc_tx_chain[DC_TX_LIST_CNT]; 489 bus_dmamap_t dc_rx_map[DC_RX_LIST_CNT]; 490 bus_dmamap_t dc_tx_map[DC_TX_LIST_CNT]; 491 u_int32_t *dc_sbuf; 492 u_int8_t dc_pad[DC_MIN_FRAMELEN]; 493 int dc_tx_err; 494 int dc_tx_first; 495 int dc_tx_prod; 496 int dc_tx_cons; 497 int dc_tx_cnt; 498 int dc_rx_err; 499 int dc_rx_cur; 500 int dc_rx_prod; 501}; 502 503struct dc_mediainfo { 504 int dc_media; 505 u_int8_t *dc_gp_ptr; 506 u_int8_t dc_gp_len; 507 u_int8_t *dc_reset_ptr; 508 u_int8_t dc_reset_len; 509 struct dc_mediainfo *dc_next; 510}; 511 512 513struct dc_type { 514 u_int16_t dc_vid; 515 u_int16_t dc_did; 516 char *dc_name; 517}; 518 519struct dc_mii_frame { 520 u_int8_t mii_stdelim; 521 u_int8_t mii_opcode; 522 u_int8_t mii_phyaddr; 523 u_int8_t mii_regaddr; 524 u_int8_t mii_turnaround; 525 u_int16_t mii_data; 526}; 527 528/* 529 * MII constants 530 */ 531#define DC_MII_STARTDELIM 0x01 532#define DC_MII_READOP 0x02 533#define DC_MII_WRITEOP 0x01 534#define DC_MII_TURNAROUND 0x02 535 536 537/* 538 * Registers specific to clone devices. 539 * This mainly relates to RX filter programming: not all 21x4x clones 540 * use the standard DEC filter programming mechanism. 541 */ 542 543/* 544 * ADMtek specific registers and constants for the AL981 and AN985. 545 * The AN985 doesn't use the magic PHY registers. 546 */ 547#define DC_AL_CR 0x88 /* command register */ 548#define DC_AL_PAR0 0xA4 /* station address */ 549#define DC_AL_PAR1 0xA8 /* station address */ 550#define DC_AL_MAR0 0xAC /* multicast hash filter */ 551#define DC_AL_MAR1 0xB0 /* multicast hash filter */ 552#define DC_AL_BMCR 0xB4 /* built in PHY control */ 553#define DC_AL_BMSR 0xB8 /* built in PHY status */ 554#define DC_AL_VENID 0xBC /* built in PHY ID0 */ 555#define DC_AL_DEVID 0xC0 /* built in PHY ID1 */ 556#define DC_AL_ANAR 0xC4 /* built in PHY autoneg advert */ 557#define DC_AL_LPAR 0xC8 /* bnilt in PHY link part. ability */ 558#define DC_AL_ANER 0xCC /* built in PHY autoneg expansion */ 559 560#define DC_AL_CR_ATUR 0x00000001 /* automatic TX underrun recovery */ 561#define DC_ADMTEK_PHYADDR 0x1 562#define DC_AL_EE_NODEADDR 4 563/* End of ADMtek specific registers */ 564 565/* 566 * ASIX specific registers. 567 */ 568#define DC_AX_FILTIDX 0x68 /* RX filter index */ 569#define DC_AX_FILTDATA 0x70 /* RX filter data */ 570 571/* 572 * Special ASIX-specific bits in the ASIX NETCFG register (CSR6). 573 */ 574#define DC_AX_NETCFG_RX_BROAD 0x00000100 575 576/* 577 * RX Filter Index Register values 578 */ 579#define DC_AX_FILTIDX_PAR0 0x00000000 580#define DC_AX_FILTIDX_PAR1 0x00000001 581#define DC_AX_FILTIDX_MAR0 0x00000002 582#define DC_AX_FILTIDX_MAR1 0x00000003 583/* End of ASIX specific registers */ 584 585/* 586 * Macronix specific registers. The Macronix chips have a special 587 * register for reading the NWAY status, which we don't use, plus 588 * a magic packet register, which we need to tweak a bit per the 589 * Macronix application notes. 590 */ 591#define DC_MX_MAGICPACKET 0x80 592#define DC_MX_NWAYSTAT 0xA0 593 594/* 595 * Magic packet register 596 */ 597#define DC_MX_MPACK_DISABLE 0x00400000 598 599/* 600 * NWAY status register. 601 */ 602#define DC_MX_NWAY_10BTHALF 0x08000000 603#define DC_MX_NWAY_10BTFULL 0x10000000 604#define DC_MX_NWAY_100BTHALF 0x20000000 605#define DC_MX_NWAY_100BTFULL 0x40000000 606#define DC_MX_NWAY_100BT4 0x80000000 607 608/* 609 * These are magic values that must be written into CSR16 610 * (DC_MX_MAGICPACKET) in order to put the chip into proper 611 * operating mode. The magic numbers are documented in the 612 * Macronix 98715 application notes. 613 */ 614#define DC_MX_MAGIC_98713 0x0F370000 615#define DC_MX_MAGIC_98713A 0x0B3C0000 616#define DC_MX_MAGIC_98715 0x0B3C0000 617#define DC_MX_MAGIC_98725 0x0B3C0000 618/* End of Macronix specific registers */ 619 620/* 621 * PNIC 82c168/82c169 specific registers. 622 * The PNIC has its own special NWAY support, which doesn't work, 623 * and shortcut ways of reading the EEPROM and MII bus. 624 */ 625#define DC_PN_GPIO 0x60 /* general purpose pins control */ 626#define DC_PN_PWRUP_CFG 0x90 /* config register, set by EEPROM */ 627#define DC_PN_SIOCTL 0x98 /* serial EEPROM control register */ 628#define DC_PN_MII 0xA0 /* MII access register */ 629#define DC_PN_NWAY 0xB8 /* Internal NWAY register */ 630 631/* Serial I/O EEPROM register */ 632#define DC_PN_SIOCTL_DATA 0x0000003F 633#define DC_PN_SIOCTL_OPCODE 0x00000300 634#define DC_PN_SIOCTL_BUSY 0x80000000 635 636#define DC_PN_EEOPCODE_ERASE 0x00000300 637#define DC_PN_EEOPCODE_READ 0x00000600 638#define DC_PN_EEOPCODE_WRITE 0x00000100 639 640/* 641 * The first two general purpose pins control speed selection and 642 * 100Mbps loopback on the 82c168 chip. The control bits should always 643 * be set (to make the data pins outputs) and the speed selction and 644 * loopback bits set accordingly when changing media. Physically, this 645 * will set the state of a relay mounted on the card. 646 */ 647#define DC_PN_GPIO_DATA0 0x000000001 648#define DC_PN_GPIO_DATA1 0x000000002 649#define DC_PN_GPIO_DATA2 0x000000004 650#define DC_PN_GPIO_DATA3 0x000000008 651#define DC_PN_GPIO_CTL0 0x000000010 652#define DC_PN_GPIO_CTL1 0x000000020 653#define DC_PN_GPIO_CTL2 0x000000040 654#define DC_PN_GPIO_CTL3 0x000000080 655#define DC_PN_GPIO_SPEEDSEL DC_PN_GPIO_DATA0/* 1 == 100Mbps, 0 == 10Mbps */ 656#define DC_PN_GPIO_100TX_LOOP DC_PN_GPIO_DATA1/* 1 == normal, 0 == loop */ 657#define DC_PN_GPIO_BNC_ENB DC_PN_GPIO_DATA2 658#define DC_PN_GPIO_100TX_LNK DC_PN_GPIO_DATA3 659#define DC_PN_GPIO_SETBIT(sc, r) \ 660 DC_SETBIT(sc, DC_PN_GPIO, ((r) | (r << 4))) 661#define DC_PN_GPIO_CLRBIT(sc, r) \ 662 { \ 663 DC_SETBIT(sc, DC_PN_GPIO, ((r) << 4)); \ 664 DC_CLRBIT(sc, DC_PN_GPIO, (r)); \ 665 } 666 667/* shortcut MII access register */ 668#define DC_PN_MII_DATA 0x0000FFFF 669#define DC_PN_MII_RESERVER 0x00020000 670#define DC_PN_MII_REGADDR 0x007C0000 671#define DC_PN_MII_PHYADDR 0x0F800000 672#define DC_PN_MII_OPCODE 0x30000000 673#define DC_PN_MII_BUSY 0x80000000 674 675#define DC_PN_MIIOPCODE_READ 0x60020000 676#define DC_PN_MIIOPCODE_WRITE 0x50020000 677 678/* Internal NWAY bits */ 679#define DC_PN_NWAY_RESET 0x00000001 /* reset */ 680#define DC_PN_NWAY_PDOWN 0x00000002 /* power down */ 681#define DC_PN_NWAY_BYPASS 0x00000004 /* bypass */ 682#define DC_PN_NWAY_AUILOWCUR 0x00000008 /* AUI low current */ 683#define DC_PN_NWAY_TPEXTEND 0x00000010 /* low squelch voltage */ 684#define DC_PN_NWAY_POLARITY 0x00000020 /* 0 == on, 1 == off */ 685#define DC_PN_NWAY_TP 0x00000040 /* 1 == tp, 0 == AUI */ 686#define DC_PN_NWAY_AUIVOLT 0x00000080 /* 1 == full, 0 == half */ 687#define DC_PN_NWAY_DUPLEX 0x00000100 /* LED, 1 == full, 0 == half */ 688#define DC_PN_NWAY_LINKTEST 0x00000200 /* 0 == on, 1 == off */ 689#define DC_PN_NWAY_AUTODETECT 0x00000400 /* 1 == off, 0 == on */ 690#define DC_PN_NWAY_SPEEDSEL 0x00000800 /* LED, 0 = 10, 1 == 100 */ 691#define DC_PN_NWAY_NWAY_ENB 0x00001000 /* 0 == off, 1 == on */ 692#define DC_PN_NWAY_CAP10HDX 0x00002000 693#define DC_PN_NWAY_CAP10FDX 0x00004000 694#define DC_PN_NWAY_CAP100FDX 0x00008000 695#define DC_PN_NWAY_CAP100HDX 0x00010000 696#define DC_PN_NWAY_CAP100T4 0x00020000 697#define DC_PN_NWAY_ANEGRESTART 0x02000000 /* resets when aneg done */ 698#define DC_PN_NWAY_REMFAULT 0x04000000 699#define DC_PN_NWAY_LPAR10HDX 0x08000000 700#define DC_PN_NWAY_LPAR10FDX 0x10000000 701#define DC_PN_NWAY_LPAR100FDX 0x20000000 702#define DC_PN_NWAY_LPAR100HDX 0x40000000 703#define DC_PN_NWAY_LPAR100T4 0x80000000 704 705/* End of PNIC specific registers */ 706 707/* 708 * CONEXANT specific registers. 709 */ 710 711#define DC_CONEXANT_PHYADDR 0x1 712#define DC_CONEXANT_EE_NODEADDR 0x19A 713 714/* End of CONEXANT specific registers */ 715 716 717struct dc_softc { 718 struct arpcom arpcom; /* interface info */ 719 bus_space_handle_t dc_bhandle; /* bus space handle */ 720 bus_space_tag_t dc_btag; /* bus space tag */ 721 bus_dma_tag_t dc_ltag; /* tag for descriptor ring */ 722 bus_dmamap_t dc_lmap; /* map for descriptor ring */ 723 u_int32_t dc_laddr; /* DMA address of dc_ldata */ 724 bus_dma_tag_t dc_mtag; /* tag for mbufs */ 725 bus_dmamap_t dc_sparemap; 726 bus_dma_tag_t dc_stag; /* tag for the setup frame */ 727 bus_dmamap_t dc_smap; /* map for the setup frame */ 728 u_int32_t dc_saddr; /* DMA address of setup frame */ 729 void *dc_intrhand; 730 struct resource *dc_irq; 731 struct resource *dc_res; 732 struct dc_type *dc_info; /* adapter info */ 733 device_t dc_miibus; 734 u_int8_t dc_unit; /* interface number */ 735 u_int8_t dc_type; 736 u_int8_t dc_pmode; 737 u_int8_t dc_link; 738 u_int8_t dc_cachesize; 739 int dc_romwidth; 740 int dc_pnic_rx_bug_save; 741 unsigned char *dc_pnic_rx_buf; 742 int dc_if_flags; 743 int dc_if_media; 744 u_int32_t dc_flags; 745 u_int32_t dc_txthresh; 746 u_int8_t *dc_srom; 747 struct dc_mediainfo *dc_mi; 748 struct dc_list_data *dc_ldata; 749 struct dc_chain_data dc_cdata; 750 struct callout dc_stat_ch; 751#ifdef SRM_MEDIA 752 int dc_srm_media; 753#endif 754 struct mtx dc_mtx; 755#ifdef DEVICE_POLLING 756 int rxcycles; /* ... when polling */ 757#endif 758 int suspended; /* 0 = normal 1 = suspended */ 759 u_int32_t saved_maps[5]; /* pci data */ 760 u_int32_t saved_biosaddr; 761 u_int8_t saved_intline; 762 u_int8_t saved_cachelnsz; 763 u_int8_t saved_lattimer; 764}; 765 766 767#define DC_LOCK(_sc) mtx_lock(&(_sc)->dc_mtx) 768#define DC_UNLOCK(_sc) mtx_unlock(&(_sc)->dc_mtx) 769#define DC_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->dc_mtx, MA_OWNED) 770 771#define DC_TX_POLL 0x00000001 772#define DC_TX_COALESCE 0x00000002 773#define DC_TX_ADMTEK_WAR 0x00000004 774#define DC_TX_USE_TX_INTR 0x00000008 775#define DC_RX_FILTER_TULIP 0x00000010 776#define DC_TX_INTR_FIRSTFRAG 0x00000020 777#define DC_PNIC_RX_BUG_WAR 0x00000040 778#define DC_TX_FIXED_RING 0x00000080 779#define DC_TX_STORENFWD 0x00000100 780#define DC_REDUCED_MII_POLL 0x00000200 781#define DC_TX_INTR_ALWAYS 0x00000400 782#define DC_21143_NWAY 0x00000800 783#define DC_128BIT_HASH 0x00001000 784#define DC_64BIT_HASH 0x00002000 785#define DC_TULIP_LEDS 0x00004000 786#define DC_TX_ONE 0x00008000 787#define DC_TX_ALIGN 0x00010000 /* align mbuf on tx */ 788 789/* 790 * register space access macros 791 */ 792#define CSR_WRITE_4(sc, reg, val) \ 793 bus_space_write_4(sc->dc_btag, sc->dc_bhandle, reg, val) 794 795#define CSR_READ_4(sc, reg) \ 796 bus_space_read_4(sc->dc_btag, sc->dc_bhandle, reg) 797 798#define DC_TIMEOUT 1000 799#define ETHER_ALIGN 2 800 801/* 802 * General constants that are fun to know. 803 */ 804 805/* 806 * DEC PCI vendor ID 807 */ 808#define DC_VENDORID_DEC 0x1011 809 810/* 811 * DEC/Intel 21143 PCI device ID 812 */ 813#define DC_DEVICEID_21143 0x0019 814 815/* 816 * Macronix PCI vendor ID 817 */ 818#define DC_VENDORID_MX 0x10D9 819 820/* 821 * Macronix PMAC device IDs. 822 */ 823#define DC_DEVICEID_98713 0x0512 824#define DC_DEVICEID_987x5 0x0531 825#define DC_DEVICEID_98727 0x0532 826#define DC_DEVICEID_98732 0x0532 827 828/* Macronix PCI revision codes. */ 829#define DC_REVISION_98713 0x00 830#define DC_REVISION_98713A 0x10 831#define DC_REVISION_98715 0x20 832#define DC_REVISION_98715AEC_C 0x25 833#define DC_REVISION_98725 0x30 834 835/* 836 * Compex PCI vendor ID. 837 */ 838#define DC_VENDORID_CP 0x11F6 839 840/* 841 * Compex PMAC PCI device IDs. 842 */ 843#define DC_DEVICEID_98713_CP 0x9881 844 845/* 846 * Lite-On PNIC PCI vendor ID 847 */ 848#define DC_VENDORID_LO 0x11AD 849 850/* 851 * 82c168/82c169 PNIC device IDs. Both chips have the same device 852 * ID but different revisions. Revision 0x10 is the 82c168, and 853 * 0x20 is the 82c169. 854 */ 855#define DC_DEVICEID_82C168 0x0002 856 857#define DC_REVISION_82C168 0x10 858#define DC_REVISION_82C169 0x20 859 860/* 861 * Lite-On PNIC II device ID. Note: this is actually a Macronix 98715A 862 * with wake on lan/magic packet support. 863 */ 864#define DC_DEVICEID_82C115 0xc115 865 866/* 867 * Davicom vendor ID. 868 */ 869#define DC_VENDORID_DAVICOM 0x1282 870 871/* 872 * Davicom device IDs. 873 */ 874#define DC_DEVICEID_DM9009 0x9009 875#define DC_DEVICEID_DM9100 0x9100 876#define DC_DEVICEID_DM9102 0x9102 877 878/* 879 * The DM9102A has the same PCI device ID as the DM9102, 880 * but a higher revision code. 881 */ 882#define DC_REVISION_DM9102 0x10 883#define DC_REVISION_DM9102A 0x30 884 885/* 886 * ADMtek vendor ID. 887 */ 888#define DC_VENDORID_ADMTEK 0x1317 889 890/* 891 * ADMtek device IDs. 892 */ 893#define DC_DEVICEID_AL981 0x0981 894#define DC_DEVICEID_AN985 0x0985 895#define DC_DEVICEID_FA511 0x1985 896#define DC_DEVICEID_ADM9511 0x9511 897#define DC_DEVICEID_ADM9513 0x9513 898 899/* 900 * 3COM PCI vendor ID 901 */ 902#define DC_VENDORID_3COM 0x10b7 903 904/* 905 * 3COM OfficeConnect 10/100B (3CSOHO100B-TX) 906 */ 907#define DC_DEVICEID_3CSOHOB 0x9300 908 909/* 910 * ASIX vendor ID. 911 */ 912#define DC_VENDORID_ASIX 0x125B 913 914/* 915 * ASIX device IDs. 916 */ 917#define DC_DEVICEID_AX88140A 0x1400 918 919/* 920 * The ASIX AX88140 and ASIX AX88141 have the same vendor and 921 * device IDs but different revision values. 922 */ 923#define DC_REVISION_88140 0x00 924#define DC_REVISION_88141 0x10 925 926/* 927 * Accton vendor ID. 928 */ 929#define DC_VENDORID_ACCTON 0x1113 930 931/* 932 * Accton device IDs. 933 */ 934#define DC_DEVICEID_EN1217 0x1217 935#define DC_DEVICEID_EN2242 0x1216 936 937/* 938 * Xircom vendor ID 939 */ 940#define DC_VENDORID_XIRCOM 0x115d 941 942/* 943 * Xircom device IDs. 944 */ 945#define DC_DEVICEID_X3201 0x0003 946 947/* 948 * Abocom vendor ID 949 */ 950#define DC_VENDORID_ABOCOM 0x13d1 951 952/* 953 * Abocom device IDs. 954 */ 955#define DC_DEVICEID_FE2500 0xAB02 956#define DC_DEVICEID_FE2500MX 0xab08 957 958/* 959 * Conexant vendor ID. 960 */ 961#define DC_VENDORID_CONEXANT 0x14f1 962 963/* 964 * Conexant device IDs. 965 */ 966#define DC_DEVICEID_RS7112 0x1803 967 968/* 969 * Planex vendor ID 970 */ 971#define DC_VENDORID_PLANEX 0x14ea 972 973/* 974 * Planex device IDs. 975 */ 976#define DC_DEVICEID_FNW3602T 0xab08 977 978/* 979 * Not sure who this vendor should be, so we'll go with HAWKING until 980 * I can locate the right one. 981 */ 982#define DC_VENDORID_HAWKING 0x17b3 983 984/* 985 * Sure looks like an abocom device ID, but it found on my hawking PN672TX 986 * card. Use that for now, and upgrade later. 987 */ 988#define DC_DEVICEID_HAWKING_PN672TX 0xab08 989 990/* 991 * Microsoft device ID. 992 */ 993#define DC_VENDORID_MICROSOFT 0x1414 994 995/* 996 * Supported Microsoft PCI and cardbus NICs. These are really 997 * ADMtek parts in disguise. 998 */ 999 1000#define DC_DEVICEID_MSMN120 0x0001 1001#define DC_DEVICEID_MSMN130 0x0002 1002#define DC_DEVICEID_MSMN130_FAKE 0xFFF2 1003 1004/* 1005 * PCI low memory base and low I/O base register, and 1006 * other PCI registers. 1007 */ 1008 1009#define DC_PCI_CFID 0x00 /* Id */ 1010#define DC_PCI_CFCS 0x04 /* Command and status */ 1011#define DC_PCI_CFRV 0x08 /* Revision */ 1012#define DC_PCI_CFLT 0x0C /* Latency timer */ 1013#define DC_PCI_CFBIO 0x10 /* Base I/O address */ 1014#define DC_PCI_CFBMA 0x14 /* Base memory address */ 1015#define DC_PCI_CCIS 0x28 /* Card info struct */ 1016#define DC_PCI_CSID 0x2C /* Subsystem ID */ 1017#define DC_PCI_CBER 0x30 /* Expansion ROM base address */ 1018#define DC_PCI_CCAP 0x34 /* Caps pointer - PD/TD chip only */ 1019#define DC_PCI_CFIT 0x3C /* Interrupt */ 1020#define DC_PCI_CFDD 0x40 /* Device and driver area */ 1021#define DC_PCI_CWUA0 0x44 /* Wake-Up LAN addr 0 */ 1022#define DC_PCI_CWUA1 0x48 /* Wake-Up LAN addr 1 */ 1023#define DC_PCI_SOP0 0x4C /* SecureON passwd 0 */ 1024#define DC_PCI_SOP1 0x50 /* SecureON passwd 1 */ 1025#define DC_PCI_CWUC 0x54 /* Configuration Wake-Up cmd */ 1026#define DC_PCI_CCID 0xDC /* Capability ID - PD/TD only */ 1027#define DC_PCI_CPMC 0xE0 /* Pwrmgmt ctl & sts - PD/TD only */ 1028 1029/* PCI ID register */ 1030#define DC_CFID_VENDOR 0x0000FFFF 1031#define DC_CFID_DEVICE 0xFFFF0000 1032 1033/* PCI command/status register */ 1034#define DC_CFCS_IOSPACE 0x00000001 /* I/O space enable */ 1035#define DC_CFCS_MEMSPACE 0x00000002 /* memory space enable */ 1036#define DC_CFCS_BUSMASTER 0x00000004 /* bus master enable */ 1037#define DC_CFCS_MWI_ENB 0x00000010 /* mem write and inval enable */ 1038#define DC_CFCS_PARITYERR_ENB 0x00000040 /* parity error enable */ 1039#define DC_CFCS_SYSERR_ENB 0x00000100 /* system error enable */ 1040#define DC_CFCS_NEWCAPS 0x00100000 /* new capabilities */ 1041#define DC_CFCS_FAST_B2B 0x00800000 /* fast back-to-back capable */ 1042#define DC_CFCS_DATAPARITY 0x01000000 /* Parity error report */ 1043#define DC_CFCS_DEVSELTIM 0x06000000 /* devsel timing */ 1044#define DC_CFCS_TGTABRT 0x10000000 /* received target abort */ 1045#define DC_CFCS_MASTERABRT 0x20000000 /* received master abort */ 1046#define DC_CFCS_SYSERR 0x40000000 /* asserted system error */ 1047#define DC_CFCS_PARITYERR 0x80000000 /* asserted parity error */ 1048 1049/* PCI revision register */ 1050#define DC_CFRV_STEPPING 0x0000000F 1051#define DC_CFRV_REVISION 0x000000F0 1052#define DC_CFRV_SUBCLASS 0x00FF0000 1053#define DC_CFRV_BASECLASS 0xFF000000 1054 1055#define DC_21143_PB_REV 0x00000030 1056#define DC_21143_TB_REV 0x00000030 1057#define DC_21143_PC_REV 0x00000030 1058#define DC_21143_TC_REV 0x00000030 1059#define DC_21143_PD_REV 0x00000041 1060#define DC_21143_TD_REV 0x00000041 1061 1062/* PCI latency timer register */ 1063#define DC_CFLT_CACHELINESIZE 0x000000FF 1064#define DC_CFLT_LATENCYTIMER 0x0000FF00 1065 1066/* PCI subsystem ID register */ 1067#define DC_CSID_VENDOR 0x0000FFFF 1068#define DC_CSID_DEVICE 0xFFFF0000 1069 1070/* PCI cababilities pointer */ 1071#define DC_CCAP_OFFSET 0x000000FF 1072 1073/* PCI interrupt config register */ 1074#define DC_CFIT_INTLINE 0x000000FF 1075#define DC_CFIT_INTPIN 0x0000FF00 1076#define DC_CFIT_MIN_GNT 0x00FF0000 1077#define DC_CFIT_MAX_LAT 0xFF000000 1078 1079/* PCI capability register */ 1080#define DC_CCID_CAPID 0x000000FF 1081#define DC_CCID_NEXTPTR 0x0000FF00 1082#define DC_CCID_PM_VERS 0x00070000 1083#define DC_CCID_PME_CLK 0x00080000 1084#define DC_CCID_DVSPEC_INT 0x00200000 1085#define DC_CCID_STATE_D1 0x02000000 1086#define DC_CCID_STATE_D2 0x04000000 1087#define DC_CCID_PME_D0 0x08000000 1088#define DC_CCID_PME_D1 0x10000000 1089#define DC_CCID_PME_D2 0x20000000 1090#define DC_CCID_PME_D3HOT 0x40000000 1091#define DC_CCID_PME_D3COLD 0x80000000 1092 1093/* PCI power management control/status register */ 1094#define DC_CPMC_STATE 0x00000003 1095#define DC_CPMC_PME_ENB 0x00000100 1096#define DC_CPMC_PME_STS 0x00008000 1097 1098#define DC_PSTATE_D0 0x0 1099#define DC_PSTATE_D1 0x1 1100#define DC_PSTATE_D2 0x2 1101#define DC_PSTATE_D3 0x3 1102 1103/* Device specific region */ 1104/* Configuration and driver area */ 1105#define DC_CFDD_DRVUSE 0x0000FFFF 1106#define DC_CFDD_SNOOZE_MODE 0x40000000 1107#define DC_CFDD_SLEEP_MODE 0x80000000 1108 1109/* Configuration wake-up command register */ 1110#define DC_CWUC_MUST_BE_ZERO 0x00000001 1111#define DC_CWUC_SECUREON_ENB 0x00000002 1112#define DC_CWUC_FORCE_WUL 0x00000004 1113#define DC_CWUC_BNC_ABILITY 0x00000008 1114#define DC_CWUC_AUI_ABILITY 0x00000010 1115#define DC_CWUC_TP10_ABILITY 0x00000020 1116#define DC_CWUC_MII_ABILITY 0x00000040 1117#define DC_CWUC_SYM_ABILITY 0x00000080 1118#define DC_CWUC_LOCK 0x00000100 1119 1120/* 1121 * SROM nonsense. 1122 */ 1123 1124#define DC_IB_CTLRCNT 0x13 1125#define DC_IB_LEAF0_CNUM 0x1A 1126#define DC_IB_LEAF0_OFFSET 0x1B 1127 1128struct dc_info_leaf { 1129 u_int16_t dc_conntype; 1130 u_int8_t dc_blkcnt; 1131 u_int8_t dc_rsvd; 1132 u_int16_t dc_infoblk; 1133}; 1134 1135#define DC_CTYPE_10BT 0x0000 1136#define DC_CTYPE_10BT_NWAY 0x0100 1137#define DC_CTYPE_10BT_FDX 0x0204 1138#define DC_CTYPE_10B2 0x0001 1139#define DC_CTYPE_10B5 0x0002 1140#define DC_CTYPE_100BT 0x0003 1141#define DC_CTYPE_100BT_FDX 0x0205 1142#define DC_CTYPE_100T4 0x0006 1143#define DC_CTYPE_100FX 0x0007 1144#define DC_CTYPE_100FX_FDX 0x0208 1145#define DC_CTYPE_MII_10BT 0x0009 1146#define DC_CTYPE_MII_10BT_FDX 0x020A 1147#define DC_CTYPE_MII_100BT 0x000D 1148#define DC_CTYPE_MII_100BT_FDX 0x020E 1149#define DC_CTYPE_MII_100T4 0x000F 1150#define DC_CTYPE_MII_100FX 0x0010 1151#define DC_CTYPE_MII_100FX_FDX 0x0211 1152#define DC_CTYPE_DYN_PUP_AUTOSENSE 0x0800 1153#define DC_CTYPE_PUP_AUTOSENSE 0x8800 1154#define DC_CTYPE_NOMEDIA 0xFFFF 1155 1156#define DC_EBLOCK_SIA 0x0002 1157#define DC_EBLOCK_MII 0x0003 1158#define DC_EBLOCK_SYM 0x0004 1159#define DC_EBLOCK_RESET 0x0005 1160#define DC_EBLOCK_PHY_SHUTDOWN 0x0006 1161 1162struct dc_leaf_hdr { 1163 u_int16_t dc_mtype; 1164 u_int8_t dc_mcnt; 1165 u_int8_t dc_rsvd; 1166}; 1167 1168struct dc_eblock_hdr { 1169 u_int8_t dc_len; 1170 u_int8_t dc_type; 1171}; 1172 1173struct dc_eblock_sia { 1174 struct dc_eblock_hdr dc_sia_hdr; 1175 u_int8_t dc_sia_code; 1176 union { 1177 struct dc_sia_ext { /* if (dc_sia_code & DC_SIA_CODE_EXT) */ 1178 u_int8_t dc_sia_mediaspec[6]; /* CSR13, CSR14, CSR15 */ 1179 u_int8_t dc_sia_gpio_ctl[2]; 1180 u_int8_t dc_sia_gpio_dat[2]; 1181 } dc_sia_ext; 1182 struct dc_sia_noext { 1183 u_int8_t dc_sia_gpio_ctl[2]; 1184 u_int8_t dc_sia_gpio_dat[2]; 1185 } dc_sia_noext; 1186 } dc_un; 1187}; 1188 1189#define DC_SIA_CODE_10BT 0x00 1190#define DC_SIA_CODE_10B2 0x01 1191#define DC_SIA_CODE_10B5 0x02 1192#define DC_SIA_CODE_10BT_FDX 0x04 1193#define DC_SIA_CODE_EXT 0x40 1194 1195/* 1196 * Note that the first word in the gpr and reset 1197 * sequences is always a control word. 1198 */ 1199struct dc_eblock_mii { 1200 struct dc_eblock_hdr dc_mii_hdr; 1201 u_int8_t dc_mii_phynum; 1202 u_int8_t dc_gpr_len; 1203/* u_int16_t dc_gpr_dat[n]; */ 1204/* u_int8_t dc_reset_len; */ 1205/* u_int16_t dc_reset_dat[n]; */ 1206/* There are other fields after these, but we don't 1207 * care about them since they can be determined by looking 1208 * at the PHY. 1209 */ 1210}; 1211 1212struct dc_eblock_sym { 1213 struct dc_eblock_hdr dc_sym_hdr; 1214 u_int8_t dc_sym_code; 1215 u_int8_t dc_sym_gpio_ctl[2]; 1216 u_int8_t dc_sym_gpio_dat[2]; 1217 u_int8_t dc_sym_cmd[2]; 1218}; 1219 1220#define DC_SYM_CODE_100BT 0x03 1221#define DC_SYM_CODE_100BT_FDX 0x05 1222#define DC_SYM_CODE_100T4 0x06 1223#define DC_SYM_CODE_100FX 0x07 1224#define DC_SYM_CODE_100FX_FDX 0x08 1225 1226struct dc_eblock_reset { 1227 struct dc_eblock_hdr dc_reset_hdr; 1228 u_int8_t dc_reset_len; 1229/* u_int16_t dc_reset_dat[n]; */ 1230}; 1231