ata-via.c revision 190581
1/*- 2 * Copyright (c) 1998 - 2008 S�ren Schmidt <sos@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27#include <sys/cdefs.h> 28__FBSDID("$FreeBSD: head/sys/dev/ata/chipsets/ata-via.c 190581 2009-03-30 22:18:38Z mav $"); 29 30#include "opt_ata.h" 31#include <sys/param.h> 32#include <sys/module.h> 33#include <sys/systm.h> 34#include <sys/kernel.h> 35#include <sys/ata.h> 36#include <sys/bus.h> 37#include <sys/endian.h> 38#include <sys/malloc.h> 39#include <sys/lock.h> 40#include <sys/mutex.h> 41#include <sys/sema.h> 42#include <sys/taskqueue.h> 43#include <vm/uma.h> 44#include <machine/stdarg.h> 45#include <machine/resource.h> 46#include <machine/bus.h> 47#include <sys/rman.h> 48#include <dev/pci/pcivar.h> 49#include <dev/pci/pcireg.h> 50#include <dev/ata/ata-all.h> 51#include <dev/ata/ata-pci.h> 52#include <ata_if.h> 53 54/* local prototypes */ 55static int ata_via_chipinit(device_t dev); 56static int ata_via_ch_attach(device_t dev); 57static int ata_via_ch_detach(device_t dev); 58static void ata_via_reset(device_t dev); 59static void ata_via_old_setmode(device_t dev, int mode); 60static void ata_via_southbridge_fixup(device_t dev); 61static void ata_via_new_setmode(device_t dev, int mode); 62 63/* misc defines */ 64#define VIA33 0 65#define VIA66 1 66#define VIA100 2 67#define VIA133 3 68 69#define VIACLK 0x01 70#define VIABUG 0x02 71#define VIABAR 0x04 72#define VIAAHCI 0x08 73 74 75/* 76 * VIA Technologies Inc. chipset support functions 77 */ 78static int 79ata_via_probe(device_t dev) 80{ 81 struct ata_pci_controller *ctlr = device_get_softc(dev); 82 static struct ata_chip_id ids[] = 83 {{ ATA_VIA82C586, 0x02, VIA33, 0x00, ATA_UDMA2, "82C586B" }, 84 { ATA_VIA82C586, 0x00, VIA33, 0x00, ATA_WDMA2, "82C586" }, 85 { ATA_VIA82C596, 0x12, VIA66, VIACLK, ATA_UDMA4, "82C596B" }, 86 { ATA_VIA82C596, 0x00, VIA33, 0x00, ATA_UDMA2, "82C596" }, 87 { ATA_VIA82C686, 0x40, VIA100, VIABUG, ATA_UDMA5, "82C686B"}, 88 { ATA_VIA82C686, 0x10, VIA66, VIACLK, ATA_UDMA4, "82C686A" }, 89 { ATA_VIA82C686, 0x00, VIA33, 0x00, ATA_UDMA2, "82C686" }, 90 { ATA_VIA8231, 0x00, VIA100, VIABUG, ATA_UDMA5, "8231" }, 91 { ATA_VIA8233, 0x00, VIA100, 0x00, ATA_UDMA5, "8233" }, 92 { ATA_VIA8233C, 0x00, VIA100, 0x00, ATA_UDMA5, "8233C" }, 93 { ATA_VIA8233A, 0x00, VIA133, 0x00, ATA_UDMA6, "8233A" }, 94 { ATA_VIA8235, 0x00, VIA133, 0x00, ATA_UDMA6, "8235" }, 95 { ATA_VIA8237, 0x00, VIA133, 0x00, ATA_UDMA6, "8237" }, 96 { ATA_VIA8237A, 0x00, VIA133, 0x00, ATA_UDMA6, "8237A" }, 97 { ATA_VIA8237S, 0x00, VIA133, 0x00, ATA_UDMA6, "8237S" }, 98 { ATA_VIA8251, 0x00, VIA133, 0x00, ATA_UDMA6, "8251" }, 99 { 0, 0, 0, 0, 0, 0 }}; 100 static struct ata_chip_id new_ids[] = 101 {{ ATA_VIA6410, 0x00, 0, 0x00, ATA_UDMA6, "6410" }, 102 { ATA_VIA6420, 0x00, 7, 0x00, ATA_SA150, "6420" }, 103 { ATA_VIA6421, 0x00, 6, VIABAR, ATA_SA150, "6421" }, 104 { ATA_VIA8237A, 0x00, 7, 0x00, ATA_SA150, "8237A" }, 105 { ATA_VIA8237S, 0x00, 7, 0x00, ATA_SA150, "8237S" }, 106 { ATA_VIA8251, 0x00, 0, VIAAHCI, ATA_SA300, "8251" }, 107 { 0, 0, 0, 0, 0, 0 }}; 108 109 if (pci_get_vendor(dev) != ATA_VIA_ID) 110 return ENXIO; 111 112 if (pci_get_devid(dev) == ATA_VIA82C571) { 113 if (!(ctlr->chip = ata_find_chip(dev, ids, -99))) 114 return ENXIO; 115 } 116 else { 117 if (!(ctlr->chip = ata_match_chip(dev, new_ids))) 118 return ENXIO; 119 } 120 121 ata_set_desc(dev); 122 ctlr->chipinit = ata_via_chipinit; 123 return 0; 124} 125 126static int 127ata_via_chipinit(device_t dev) 128{ 129 struct ata_pci_controller *ctlr = device_get_softc(dev); 130 131 if (ata_setup_interrupt(dev, ata_generic_intr)) 132 return ENXIO; 133 134 if (ctlr->chip->max_dma >= ATA_SA150) { 135 /* do we have AHCI capability ? */ 136 if ((ctlr->chip->cfg2 == VIAAHCI) && ata_ahci_chipinit(dev) != ENXIO) 137 return 0; 138 139 ctlr->r_type2 = SYS_RES_IOPORT; 140 ctlr->r_rid2 = PCIR_BAR(5); 141 if ((ctlr->r_res2 = bus_alloc_resource_any(dev, ctlr->r_type2, 142 &ctlr->r_rid2, RF_ACTIVE))) { 143 ctlr->ch_attach = ata_via_ch_attach; 144 ctlr->ch_detach = ata_via_ch_detach; 145 ctlr->reset = ata_via_reset; 146 } 147 148 if (ctlr->chip->cfg2 & VIABAR) { 149 ctlr->channels = 3; 150 ctlr->setmode = ata_via_new_setmode; 151 } 152 else 153 ctlr->setmode = ata_sata_setmode; 154 return 0; 155 } 156 157 /* prepare for ATA-66 on the 82C686a and 82C596b */ 158 if (ctlr->chip->cfg2 & VIACLK) 159 pci_write_config(dev, 0x50, 0x030b030b, 4); 160 161 /* the southbridge might need the data corruption fix */ 162 if (ctlr->chip->cfg2 & VIABUG) 163 ata_via_southbridge_fixup(dev); 164 165 /* set fifo configuration half'n'half */ 166 pci_write_config(dev, 0x43, 167 (pci_read_config(dev, 0x43, 1) & 0x90) | 0x2a, 1); 168 169 /* set status register read retry */ 170 pci_write_config(dev, 0x44, pci_read_config(dev, 0x44, 1) | 0x08, 1); 171 172 /* set DMA read & end-of-sector fifo flush */ 173 pci_write_config(dev, 0x46, 174 (pci_read_config(dev, 0x46, 1) & 0x0c) | 0xf0, 1); 175 176 /* set sector size */ 177 pci_write_config(dev, 0x60, DEV_BSIZE, 2); 178 pci_write_config(dev, 0x68, DEV_BSIZE, 2); 179 180 ctlr->setmode = ata_via_old_setmode; 181 return 0; 182} 183 184static int 185ata_via_ch_attach(device_t dev) 186{ 187 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); 188 struct ata_channel *ch = device_get_softc(dev); 189 190 /* newer SATA chips has resources in one BAR for each channel */ 191 if (ctlr->chip->cfg2 & VIABAR) { 192 struct resource *r_io; 193 int i, rid; 194 195 ata_pci_dmainit(dev); 196 197 rid = PCIR_BAR(ch->unit); 198 if (!(r_io = bus_alloc_resource_any(device_get_parent(dev), 199 SYS_RES_IOPORT, 200 &rid, RF_ACTIVE))) 201 return ENXIO; 202 203 for (i = ATA_DATA; i <= ATA_COMMAND; i ++) { 204 ch->r_io[i].res = r_io; 205 ch->r_io[i].offset = i; 206 } 207 ch->r_io[ATA_CONTROL].res = r_io; 208 ch->r_io[ATA_CONTROL].offset = 2 + ATA_IOSIZE; 209 ch->r_io[ATA_IDX_ADDR].res = r_io; 210 ata_default_registers(dev); 211 for (i = ATA_BMCMD_PORT; i <= ATA_BMDTP_PORT; i++) { 212 ch->r_io[i].res = ctlr->r_res1; 213 ch->r_io[i].offset = (i - ATA_BMCMD_PORT)+(ch->unit * ATA_BMIOSIZE); 214 } 215 ata_pci_hw(dev); 216 if (ch->unit >= 2) 217 return 0; 218 } 219 else { 220 /* setup the usual register normal pci style */ 221 if (ata_pci_ch_attach(dev)) 222 return ENXIO; 223 } 224 225 ch->r_io[ATA_SSTATUS].res = ctlr->r_res2; 226 ch->r_io[ATA_SSTATUS].offset = (ch->unit << ctlr->chip->cfg1); 227 ch->r_io[ATA_SERROR].res = ctlr->r_res2; 228 ch->r_io[ATA_SERROR].offset = 0x04 + (ch->unit << ctlr->chip->cfg1); 229 ch->r_io[ATA_SCONTROL].res = ctlr->r_res2; 230 ch->r_io[ATA_SCONTROL].offset = 0x08 + (ch->unit << ctlr->chip->cfg1); 231 ch->flags |= ATA_NO_SLAVE; 232 233 /* XXX SOS PHY hotplug handling missing in VIA chip ?? */ 234 /* XXX SOS unknown how to enable PHY state change interrupt */ 235 return 0; 236} 237 238static int 239ata_via_ch_detach(device_t dev) 240{ 241 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); 242 struct ata_channel *ch = device_get_softc(dev); 243 244 /* newer SATA chips has resources in one BAR for each channel */ 245 if (ctlr->chip->cfg2 & VIABAR) { 246 int rid; 247 248 rid = PCIR_BAR(ch->unit); 249 bus_release_resource(device_get_parent(dev), 250 SYS_RES_IOPORT, rid, ch->r_io[ATA_CONTROL].res); 251 252 ata_pci_dmafini(dev); 253 } 254 else { 255 /* setup the usual register normal pci style */ 256 if (ata_pci_ch_detach(dev)) 257 return ENXIO; 258 } 259 260 return 0; 261} 262 263static void 264ata_via_reset(device_t dev) 265{ 266 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); 267 struct ata_channel *ch = device_get_softc(dev); 268 269 if ((ctlr->chip->cfg2 & VIABAR) && (ch->unit > 1)) 270 ata_generic_reset(dev); 271 else 272 if (ata_sata_phy_reset(dev, -1, 1)) 273 ata_generic_reset(dev); 274} 275 276static void 277ata_via_new_setmode(device_t dev, int mode) 278{ 279 device_t gparent = GRANDPARENT(dev); 280 struct ata_pci_controller *ctlr = device_get_softc(gparent); 281 struct ata_channel *ch = device_get_softc(device_get_parent(dev)); 282 struct ata_device *atadev = device_get_softc(dev); 283 int error; 284 285 if ((ctlr->chip->cfg2 & VIABAR) && (ch->unit > 1)) { 286 u_int8_t pio_timings[] = { 0xa8, 0x65, 0x65, 0x32, 0x20, 287 0x65, 0x32, 0x20, 288 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }; 289 u_int8_t dma_timings[] = { 0xee, 0xe8, 0xe6, 0xe4, 0xe2, 0xe1, 0xe0 }; 290 291 mode = ata_check_80pin(dev, ata_limit_mode(dev, mode, ATA_UDMA6)); 292 error = ata_controlcmd(dev, ATA_SETFEATURES, ATA_SF_SETXFER, 0, mode); 293 if (bootverbose) 294 device_printf(dev, "%ssetting %s on %s chip\n", 295 (error) ? "FAILURE " : "", ata_mode2str(mode), 296 ctlr->chip->text); 297 if (!error) { 298 pci_write_config(gparent, 0xab, pio_timings[ata_mode2idx(mode)], 1); 299 if (mode >= ATA_UDMA0) 300 pci_write_config(gparent, 0xb3, 301 dma_timings[mode & ATA_MODE_MASK], 1); 302 atadev->mode = mode; 303 } 304 } 305 else 306 ata_sata_setmode(dev, mode); 307} 308 309static void 310ata_via_old_setmode(device_t dev, int mode) 311{ 312 device_t gparent = GRANDPARENT(dev); 313 struct ata_pci_controller *ctlr = device_get_softc(gparent); 314 struct ata_channel *ch = device_get_softc(device_get_parent(dev)); 315 struct ata_device *atadev = device_get_softc(dev); 316 u_int8_t timings[] = { 0xa8, 0x65, 0x42, 0x22, 0x20, 0x42, 0x22, 0x20, 317 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 }; 318 int modes[][7] = { 319 { 0xc2, 0xc1, 0xc0, 0x00, 0x00, 0x00, 0x00 }, /* VIA ATA33 */ 320 { 0xee, 0xec, 0xea, 0xe9, 0xe8, 0x00, 0x00 }, /* VIA ATA66 */ 321 { 0xf7, 0xf6, 0xf4, 0xf2, 0xf1, 0xf0, 0x00 }, /* VIA ATA100 */ 322 { 0xf7, 0xf7, 0xf6, 0xf4, 0xf2, 0xf1, 0xf0 } }; /* VIA ATA133 */ 323 int devno = (ch->unit << 1) + atadev->unit; 324 int reg = 0x53 - devno; 325 int error; 326 327 mode = ata_limit_mode(dev, mode, ctlr->chip->max_dma); 328 mode = ata_check_80pin(dev, mode); 329 330 error = ata_controlcmd(dev, ATA_SETFEATURES, ATA_SF_SETXFER, 0, mode); 331 if (bootverbose) 332 device_printf(dev, "%ssetting %s on %s chip\n", 333 (error) ? "FAILURE " : "", ata_mode2str(mode), 334 ctlr->chip->text); 335 if (!error) { 336 if (ctlr->chip->cfg1 != VIA133) 337 pci_write_config(gparent, reg - 0x08,timings[ata_mode2idx(mode)],1); 338 if (mode >= ATA_UDMA0) 339 pci_write_config(gparent, reg, 340 modes[ctlr->chip->cfg1][mode & ATA_MODE_MASK], 1); 341 else 342 pci_write_config(gparent, reg, 0x8b, 1); 343 atadev->mode = mode; 344 } 345} 346 347static void 348ata_via_southbridge_fixup(device_t dev) 349{ 350 device_t *children; 351 int nchildren, i; 352 353 if (device_get_children(device_get_parent(dev), &children, &nchildren)) 354 return; 355 356 for (i = 0; i < nchildren; i++) { 357 if (pci_get_devid(children[i]) == ATA_VIA8363 || 358 pci_get_devid(children[i]) == ATA_VIA8371 || 359 pci_get_devid(children[i]) == ATA_VIA8662 || 360 pci_get_devid(children[i]) == ATA_VIA8361) { 361 u_int8_t reg76 = pci_read_config(children[i], 0x76, 1); 362 363 if ((reg76 & 0xf0) != 0xd0) { 364 device_printf(dev, 365 "Correcting VIA config for southbridge data corruption bug\n"); 366 pci_write_config(children[i], 0x75, 0x80, 1); 367 pci_write_config(children[i], 0x76, (reg76 & 0x0f) | 0xd0, 1); 368 } 369 break; 370 } 371 } 372 free(children, M_TEMP); 373} 374 375ATA_DECLARE_DRIVER(ata_via); 376MODULE_DEPEND(ata_via, ata_ahci, 1, 1, 1); 377