options revision 250963
1# $FreeBSD: head/sys/conf/options 250963 2013-05-24 09:22:43Z achim $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65TEXTDUMP_PREFERRED opt_ddb.h 66TEXTDUMP_VERBOSE opt_ddb.h 67 68# Miscellaneous options. 69ADAPTIVE_LOCKMGRS 70ALQ 71AUDIT opt_global.h 72BOOTHOWTO opt_global.h 73BOOTVERBOSE opt_global.h 74CALLOUT_PROFILING 75CAPABILITIES opt_capsicum.h 76CAPABILITY_MODE opt_capsicum.h 77COMPAT_43 opt_compat.h 78COMPAT_43TTY opt_compat.h 79COMPAT_FREEBSD4 opt_compat.h 80COMPAT_FREEBSD5 opt_compat.h 81COMPAT_FREEBSD6 opt_compat.h 82COMPAT_FREEBSD7 opt_compat.h 83COMPILING_LINT opt_global.h 84COMPRESS_USER_CORES opt_core.h 85CY_PCI_FASTINTR 86DEADLKRES opt_watchdog.h 87DIRECTIO 88FFCLOCK 89FULL_PREEMPTION opt_sched.h 90IPI_PREEMPTION opt_sched.h 91GEOM_AES opt_geom.h 92GEOM_BDE opt_geom.h 93GEOM_BSD opt_geom.h 94GEOM_CACHE opt_geom.h 95GEOM_CONCAT opt_geom.h 96GEOM_ELI opt_geom.h 97GEOM_FOX opt_geom.h 98GEOM_GATE opt_geom.h 99GEOM_JOURNAL opt_geom.h 100GEOM_LABEL opt_geom.h 101GEOM_LINUX_LVM opt_geom.h 102GEOM_MBR opt_geom.h 103GEOM_MIRROR opt_geom.h 104GEOM_MULTIPATH opt_geom.h 105GEOM_NOP opt_geom.h 106GEOM_PART_APM opt_geom.h 107GEOM_PART_BSD opt_geom.h 108GEOM_PART_EBR opt_geom.h 109GEOM_PART_EBR_COMPAT opt_geom.h 110GEOM_PART_GPT opt_geom.h 111GEOM_PART_LDM opt_geom.h 112GEOM_PART_MBR opt_geom.h 113GEOM_PART_PC98 opt_geom.h 114GEOM_PART_VTOC8 opt_geom.h 115GEOM_PC98 opt_geom.h 116GEOM_RAID opt_geom.h 117GEOM_RAID3 opt_geom.h 118GEOM_SHSEC opt_geom.h 119GEOM_STRIPE opt_geom.h 120GEOM_SUNLABEL opt_geom.h 121GEOM_UNCOMPRESS opt_geom.h 122GEOM_UZIP opt_geom.h 123GEOM_VIRSTOR opt_geom.h 124GEOM_VOL opt_geom.h 125GEOM_ZERO opt_geom.h 126KDTRACE_HOOKS opt_kdtrace.h 127KSTACK_MAX_PAGES 128KSTACK_PAGES 129KTRACE 130KTRACE_REQUEST_POOL opt_ktrace.h 131LIBICONV 132MAC opt_global.h 133MAC_BIBA opt_dontuse.h 134MAC_BSDEXTENDED opt_dontuse.h 135MAC_IFOFF opt_dontuse.h 136MAC_LOMAC opt_dontuse.h 137MAC_MLS opt_dontuse.h 138MAC_NONE opt_dontuse.h 139MAC_PARTITION opt_dontuse.h 140MAC_PORTACL opt_dontuse.h 141MAC_SEEOTHERUIDS opt_dontuse.h 142MAC_STATIC opt_mac.h 143MAC_STUB opt_dontuse.h 144MAC_TEST opt_dontuse.h 145MD_ROOT opt_md.h 146MD_ROOT_FSTYPE opt_md.h 147MD_ROOT_SIZE opt_md.h 148MFI_DEBUG opt_mfi.h 149MFI_DECODE_LOG opt_mfi.h 150MPROF_BUFFERS opt_mprof.h 151MPROF_HASH_SIZE opt_mprof.h 152NEW_PCIB opt_global.h 153NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 154NO_ADAPTIVE_RWLOCKS 155NO_ADAPTIVE_SX 156NO_SYSCTL_DESCR opt_global.h 157NSWBUF_MIN opt_swap.h 158MBUF_PACKET_ZONE_DISABLE opt_global.h 159PANIC_REBOOT_WAIT_TIME opt_panic.h 160PPC_DEBUG opt_ppc.h 161PPC_PROBE_CHIPSET opt_ppc.h 162PPS_SYNC opt_ntp.h 163PREEMPTION opt_sched.h 164PROCDESC opt_procdesc.h 165QUOTA 166SCHED_4BSD opt_sched.h 167SCHED_STATS opt_sched.h 168SCHED_ULE opt_sched.h 169SLEEPQUEUE_PROFILING 170SLHCI_DEBUG opt_slhci.h 171SPX_HACK 172STACK opt_stack.h 173SUIDDIR 174MSGMNB opt_sysvipc.h 175MSGMNI opt_sysvipc.h 176MSGSEG opt_sysvipc.h 177MSGSSZ opt_sysvipc.h 178MSGTQL opt_sysvipc.h 179SEMMNI opt_sysvipc.h 180SEMMNS opt_sysvipc.h 181SEMMNU opt_sysvipc.h 182SEMMSL opt_sysvipc.h 183SEMOPM opt_sysvipc.h 184SEMUME opt_sysvipc.h 185SHMALL opt_sysvipc.h 186SHMMAX opt_sysvipc.h 187SHMMAXPGS opt_sysvipc.h 188SHMMIN opt_sysvipc.h 189SHMMNI opt_sysvipc.h 190SHMSEG opt_sysvipc.h 191SYSVMSG opt_sysvipc.h 192SYSVSEM opt_sysvipc.h 193SYSVSHM opt_sysvipc.h 194SW_WATCHDOG opt_watchdog.h 195TURNSTILE_PROFILING 196UMTX_PROFILING 197VFS_AIO 198VERBOSE_SYSINIT opt_global.h 199WLCACHE opt_wavelan.h 200WLDEBUG opt_wavelan.h 201 202# POSIX kernel options 203P1003_1B_MQUEUE opt_posix.h 204P1003_1B_SEMAPHORES opt_posix.h 205_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 206 207# Do we want the config file compiled into the kernel? 208INCLUDE_CONFIG_FILE opt_config.h 209 210# Options for static filesystems. These should only be used at config 211# time, since the corresponding lkms cannot work if there are any static 212# dependencies. Unusability is enforced by hiding the defines for the 213# options in a never-included header. 214CD9660 opt_dontuse.h 215EXT2FS opt_dontuse.h 216FDESCFS opt_dontuse.h 217FFS opt_dontuse.h 218FUSE opt_dontuse.h 219MSDOSFS opt_dontuse.h 220NANDFS opt_dontuse.h 221NULLFS opt_dontuse.h 222PROCFS opt_dontuse.h 223PSEUDOFS opt_dontuse.h 224REISERFS opt_dontuse.h 225TMPFS opt_dontuse.h 226UDF opt_dontuse.h 227UNIONFS opt_dontuse.h 228 229# Pseudofs debugging 230PSEUDOFS_TRACE opt_pseudofs.h 231 232# In-kernel GSS-API 233KGSSAPI opt_kgssapi.h 234KGSSAPI_DEBUG opt_kgssapi.h 235 236# These static filesystems have one slightly bogus static dependency in 237# sys/i386/i386/autoconf.c. If any of these filesystems are 238# statically compiled into the kernel, code for mounting them as root 239# filesystems will be enabled - but look below. 240NFSCLIENT opt_nfs.h 241NFSSERVER opt_nfs.h 242 243# Use these options to compile the experimental nfs client and/or 244# server that supports NFSv4 into a kernel. 245# NFSCL - client 246# NFSD - server 247NFSCL opt_nfs.h 248NFSD opt_nfs.h 249 250# filesystems and libiconv bridge 251CD9660_ICONV opt_dontuse.h 252MSDOSFS_ICONV opt_dontuse.h 253UDF_ICONV opt_dontuse.h 254 255# If you are following the conditions in the copyright, 256# you can enable soft-updates which will speed up a lot of thigs 257# and make the system safer from crashes at the same time. 258# otherwise a STUB module will be compiled in. 259SOFTUPDATES opt_ffs.h 260 261# On small, embedded systems, it can be useful to turn off support for 262# snapshots. It saves about 30-40k for a feature that would be lightly 263# used, if it is used at all. 264NO_FFS_SNAPSHOT opt_ffs.h 265 266# Enabling this option turns on support for Access Control Lists in UFS, 267# which can be used to support high security configurations. Depends on 268# UFS_EXTATTR. 269UFS_ACL opt_ufs.h 270 271# Enabling this option turns on support for extended attributes in UFS-based 272# filesystems, which can be used to support high security configurations 273# as well as new filesystem features. 274UFS_EXTATTR opt_ufs.h 275UFS_EXTATTR_AUTOSTART opt_ufs.h 276 277# Enable fast hash lookups for large directories on UFS-based filesystems. 278UFS_DIRHASH opt_ufs.h 279 280# Enable gjournal-based UFS journal. 281UFS_GJOURNAL opt_ufs.h 282 283# The below sentence is not in English, and neither is this one. 284# We plan to remove the static dependences above, with a 285# <filesystem>_ROOT option to control if it usable as root. This list 286# allows these options to be present in config files already (though 287# they won't make any difference yet). 288NFS_ROOT opt_nfsroot.h 289 290# Options used only in subr_param.c. 291HZ opt_param.h 292MAXFILES opt_param.h 293NBUF opt_param.h 294NSFBUFS opt_param.h 295VM_BCACHE_SIZE_MAX opt_param.h 296VM_SWZONE_SIZE_MAX opt_param.h 297MAXUSERS 298DFLDSIZ opt_param.h 299MAXDSIZ opt_param.h 300MAXSSIZ opt_param.h 301 302# Generic SCSI options. 303CAM_MAX_HIGHPOWER opt_cam.h 304CAMDEBUG opt_cam.h 305CAM_DEBUG_COMPILE opt_cam.h 306CAM_DEBUG_DELAY opt_cam.h 307CAM_DEBUG_BUS opt_cam.h 308CAM_DEBUG_TARGET opt_cam.h 309CAM_DEBUG_LUN opt_cam.h 310CAM_DEBUG_FLAGS opt_cam.h 311CAM_BOOT_DELAY opt_cam.h 312SCSI_DELAY opt_scsi.h 313SCSI_NO_SENSE_STRINGS opt_scsi.h 314SCSI_NO_OP_STRINGS opt_scsi.h 315 316# Options used only in cam/ata/ata_da.c 317ADA_TEST_FAILURE opt_ada.h 318ATA_STATIC_ID opt_ada.h 319 320# Options used only in cam/scsi/scsi_cd.c 321CHANGER_MIN_BUSY_SECONDS opt_cd.h 322CHANGER_MAX_BUSY_SECONDS opt_cd.h 323 324# Options used only in cam/scsi/scsi_sa.c. 325SA_IO_TIMEOUT opt_sa.h 326SA_SPACE_TIMEOUT opt_sa.h 327SA_REWIND_TIMEOUT opt_sa.h 328SA_ERASE_TIMEOUT opt_sa.h 329SA_1FM_AT_EOD opt_sa.h 330 331# Options used only in cam/scsi/scsi_pt.c 332SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 333 334# Options used only in cam/scsi/scsi_ses.c 335SES_ENABLE_PASSTHROUGH opt_ses.h 336 337# Options used in dev/sym/ (Symbios SCSI driver). 338SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 339 # Allows the ncr to take precedence 340 # 1 (1<<0) -> 810a, 860 341 # 2 (1<<1) -> 825a, 875, 885, 895 342 # 4 (1<<2) -> 895a, 896, 1510d 343SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 344 # disabled:0 (default), enabled:1 345SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 346 # disabled:0, enabled:1 (default) 347SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 348 # default:8, range:[1..64] 349 350# Options used only in pci/ncr.c 351SCSI_NCR_DEBUG opt_ncr.h 352SCSI_NCR_MAX_SYNC opt_ncr.h 353SCSI_NCR_MAX_WIDE opt_ncr.h 354SCSI_NCR_MYADDR opt_ncr.h 355 356# Options used only in dev/isp/* 357ISP_TARGET_MODE opt_isp.h 358ISP_FW_CRASH_DUMP opt_isp.h 359ISP_DEFAULT_ROLES opt_isp.h 360ISP_INTERNAL_TARGET opt_isp.h 361 362# Options used only in dev/iscsi 363ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 364 365# Net stuff. 366ACCEPT_FILTER_DATA 367ACCEPT_FILTER_DNS 368ACCEPT_FILTER_HTTP 369ALTQ opt_global.h 370ALTQ_CBQ opt_altq.h 371ALTQ_CDNR opt_altq.h 372ALTQ_DEBUG opt_altq.h 373ALTQ_HFSC opt_altq.h 374ALTQ_NOPCC opt_altq.h 375ALTQ_PRIQ opt_altq.h 376ALTQ_RED opt_altq.h 377ALTQ_RIO opt_altq.h 378BOOTP opt_bootp.h 379BOOTP_BLOCKSIZE opt_bootp.h 380BOOTP_COMPAT opt_bootp.h 381BOOTP_NFSROOT opt_bootp.h 382BOOTP_NFSV3 opt_bootp.h 383BOOTP_WIRED_TO opt_bootp.h 384DEVICE_POLLING 385DEV_ENC opt_enc.h 386DEV_PF opt_pf.h 387DEV_PFLOG opt_pf.h 388DEV_PFSYNC opt_pf.h 389DEV_VLAN opt_vlan.h 390DUMMYNET opt_ipdn.h 391ETHER_8022 opt_ef.h 392ETHER_8023 opt_ef.h 393ETHER_II opt_ef.h 394ETHER_SNAP opt_ef.h 395INET opt_inet.h 396INET6 opt_inet6.h 397IPDIVERT 398IPFILTER opt_ipfilter.h 399IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 400IPFILTER_LOG opt_ipfilter.h 401IPFILTER_LOOKUP opt_ipfilter.h 402IPFIREWALL opt_ipfw.h 403IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 404IPFIREWALL_NAT opt_ipfw.h 405IPFIREWALL_VERBOSE opt_ipfw.h 406IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 407IPSEC opt_ipsec.h 408IPSEC_DEBUG opt_ipsec.h 409IPSEC_FILTERTUNNEL opt_ipsec.h 410IPSEC_NAT_T opt_ipsec.h 411IPSTEALTH 412IPX 413KRPC 414LIBALIAS 415LIBMBPOOL 416LIBMCHAIN 417MBUF_PROFILING 418MBUF_STRESS_TEST 419MROUTING opt_mrouting.h 420NETATALK opt_atalk.h 421NFSLOCKD 422PCBGROUP opt_pcbgroup.h 423PF_DEFAULT_TO_DROP opt_pf.h 424RADIX_MPATH opt_mpath.h 425ROUTETABLES opt_route.h 426SLIP_IFF_OPTS opt_slip.h 427TCPDEBUG 428TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 429TCP_SIGNATURE opt_inet.h 430VLAN_ARRAY opt_vlan.h 431XBONEHACK 432FLOWTABLE opt_route.h 433 434# 435# SCTP 436# 437SCTP opt_sctp.h 438SCTP_DEBUG opt_sctp.h # Enable debug printfs 439SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 440SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 441SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 442SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 443SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 444SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 445SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 446SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 447SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 448# 449# 450# 451 452# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 453# Each netgraph node type can be either be compiled into the kernel 454# or loaded dynamically. To get the former, include the corresponding 455# option below. Each type has its own man page, e.g. ng_async(4). 456NETGRAPH 457NETGRAPH_DEBUG opt_netgraph.h 458NETGRAPH_ASYNC opt_netgraph.h 459NETGRAPH_ATMLLC opt_netgraph.h 460NETGRAPH_ATM_ATMPIF opt_netgraph.h 461NETGRAPH_BLUETOOTH opt_netgraph.h 462NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 463NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 464NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 465NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 466NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 467NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 468NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 469NETGRAPH_BPF opt_netgraph.h 470NETGRAPH_BRIDGE opt_netgraph.h 471NETGRAPH_CAR opt_netgraph.h 472NETGRAPH_CISCO opt_netgraph.h 473NETGRAPH_DEFLATE opt_netgraph.h 474NETGRAPH_DEVICE opt_netgraph.h 475NETGRAPH_ECHO opt_netgraph.h 476NETGRAPH_EIFACE opt_netgraph.h 477NETGRAPH_ETHER opt_netgraph.h 478NETGRAPH_ETHER_ECHO opt_netgraph.h 479NETGRAPH_FEC opt_netgraph.h 480NETGRAPH_FRAME_RELAY opt_netgraph.h 481NETGRAPH_GIF opt_netgraph.h 482NETGRAPH_GIF_DEMUX opt_netgraph.h 483NETGRAPH_HOLE opt_netgraph.h 484NETGRAPH_IFACE opt_netgraph.h 485NETGRAPH_IP_INPUT opt_netgraph.h 486NETGRAPH_IPFW opt_netgraph.h 487NETGRAPH_KSOCKET opt_netgraph.h 488NETGRAPH_L2TP opt_netgraph.h 489NETGRAPH_LMI opt_netgraph.h 490# MPPC compression requires proprietary files (not included) 491NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 492NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 493NETGRAPH_NAT opt_netgraph.h 494NETGRAPH_NETFLOW opt_netgraph.h 495NETGRAPH_ONE2MANY opt_netgraph.h 496NETGRAPH_PATCH opt_netgraph.h 497NETGRAPH_PIPE opt_netgraph.h 498NETGRAPH_PPP opt_netgraph.h 499NETGRAPH_PPPOE opt_netgraph.h 500NETGRAPH_PPTPGRE opt_netgraph.h 501NETGRAPH_PRED1 opt_netgraph.h 502NETGRAPH_RFC1490 opt_netgraph.h 503NETGRAPH_SOCKET opt_netgraph.h 504NETGRAPH_SPLIT opt_netgraph.h 505NETGRAPH_SPPP opt_netgraph.h 506NETGRAPH_TAG opt_netgraph.h 507NETGRAPH_TCPMSS opt_netgraph.h 508NETGRAPH_TEE opt_netgraph.h 509NETGRAPH_TTY opt_netgraph.h 510NETGRAPH_UI opt_netgraph.h 511NETGRAPH_VJC opt_netgraph.h 512NETGRAPH_VLAN opt_netgraph.h 513 514# NgATM options 515NGATM_ATM opt_netgraph.h 516NGATM_ATMBASE opt_netgraph.h 517NGATM_SSCOP opt_netgraph.h 518NGATM_SSCFU opt_netgraph.h 519NGATM_UNI opt_netgraph.h 520NGATM_CCATM opt_netgraph.h 521 522# DRM options 523DRM_DEBUG opt_drm.h 524 525SOCKET_SEND_COW opt_zero.h 526SOCKET_RECV_PFLIP opt_zero.h 527TI_SF_BUF_JUMBO opt_ti.h 528TI_JUMBO_HDRSPLIT opt_ti.h 529 530# XXX Conflict: # of devices vs network protocol (Native ATM). 531# This makes "atm.h" unusable. 532NATM 533 534# DPT driver debug flags 535DPT_MEASURE_PERFORMANCE opt_dpt.h 536DPT_RESET_HBA opt_dpt.h 537 538# Misc debug flags. Most of these should probably be replaced with 539# 'DEBUG', and then let people recompile just the interesting modules 540# with 'make CC="cc -DDEBUG"'. 541CLUSTERDEBUG opt_debug_cluster.h 542DEBUG_1284 opt_ppb_1284.h 543VP0_DEBUG opt_vpo.h 544LPT_DEBUG opt_lpt.h 545PLIP_DEBUG opt_plip.h 546LOCKF_DEBUG opt_debug_lockf.h 547NETATALKDEBUG opt_atalk.h 548SI_DEBUG opt_debug_si.h 549 550# Fb options 551FB_DEBUG opt_fb.h 552FB_INSTALL_CDEV opt_fb.h 553 554# ppbus related options 555PERIPH_1284 opt_ppb_1284.h 556DONTPROBE_1284 opt_ppb_1284.h 557 558# smbus related options 559ENABLE_ALART opt_intpm.h 560 561# These cause changes all over the kernel 562BLKDEV_IOSIZE opt_global.h 563BURN_BRIDGES opt_global.h 564DEBUG opt_global.h 565DEBUG_LOCKS opt_global.h 566DEBUG_VFS_LOCKS opt_global.h 567DFLTPHYS opt_global.h 568DIAGNOSTIC opt_global.h 569INVARIANT_SUPPORT opt_global.h 570INVARIANTS opt_global.h 571MAXCPU opt_global.h 572MAXMEMDOM opt_global.h 573MAXPHYS opt_global.h 574MCLSHIFT opt_global.h 575MUTEX_DEBUG opt_global.h 576MUTEX_NOINLINE opt_global.h 577LOCK_PROFILING opt_global.h 578LOCK_PROFILING_FAST opt_global.h 579MSIZE opt_global.h 580REGRESSION opt_global.h 581RWLOCK_NOINLINE opt_global.h 582SX_NOINLINE opt_global.h 583VFS_BIO_DEBUG opt_global.h 584 585# These are VM related options 586VM_KMEM_SIZE opt_vm.h 587VM_KMEM_SIZE_SCALE opt_vm.h 588VM_KMEM_SIZE_MAX opt_vm.h 589VM_NRESERVLEVEL opt_vm.h 590VM_LEVEL_0_ORDER opt_vm.h 591NO_SWAPPING opt_vm.h 592MALLOC_MAKE_FAILURES opt_vm.h 593MALLOC_PROFILE opt_vm.h 594MALLOC_DEBUG_MAXZONES opt_vm.h 595 596# The MemGuard replacement allocator used for tamper-after-free detection 597DEBUG_MEMGUARD opt_vm.h 598 599# The RedZone malloc(9) protection 600DEBUG_REDZONE opt_vm.h 601 602# Standard SMP options 603SMP opt_global.h 604 605# Size of the kernel message buffer 606MSGBUF_SIZE opt_msgbuf.h 607 608# NFS options 609NFS_MINATTRTIMO opt_nfs.h 610NFS_MAXATTRTIMO opt_nfs.h 611NFS_MINDIRATTRTIMO opt_nfs.h 612NFS_MAXDIRATTRTIMO opt_nfs.h 613NFS_GATHERDELAY opt_nfs.h 614NFS_WDELAYHASHSIZ opt_nfs.h 615NFS_DEBUG opt_nfs.h 616 617# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 618OVERRIDE_CARD opt_bktr.h 619OVERRIDE_TUNER opt_bktr.h 620OVERRIDE_DBX opt_bktr.h 621OVERRIDE_MSP opt_bktr.h 622BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 623BROOKTREE_ALLOC_PAGES opt_bktr.h 624BKTR_OVERRIDE_CARD opt_bktr.h 625BKTR_OVERRIDE_TUNER opt_bktr.h 626BKTR_OVERRIDE_DBX opt_bktr.h 627BKTR_OVERRIDE_MSP opt_bktr.h 628BKTR_SYSTEM_DEFAULT opt_bktr.h 629BKTR_ALLOC_PAGES opt_bktr.h 630BKTR_USE_PLL opt_bktr.h 631BKTR_GPIO_ACCESS opt_bktr.h 632BKTR_NO_MSP_RESET opt_bktr.h 633BKTR_430_FX_MODE opt_bktr.h 634BKTR_SIS_VIA_MODE opt_bktr.h 635BKTR_USE_FREEBSD_SMBUS opt_bktr.h 636BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 637 638# Options to support PPS 639UART_PPS_ON_CTS opt_uart.h 640 641# options for bus/device framework 642BUS_DEBUG opt_bus.h 643 644# options for USB support 645USB_DEBUG opt_usb.h 646USB_HOST_ALIGN opt_usb.h 647USB_REQ_DEBUG opt_usb.h 648USB_TEMPLATE opt_usb.h 649USB_VERBOSE opt_usb.h 650USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 651U3G_DEBUG opt_u3g.h 652UKBD_DFLT_KEYMAP opt_ukbd.h 653UPLCOM_INTR_INTERVAL opt_uplcom.h 654UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 655UVSCOM_INTR_INTERVAL opt_uvscom.h 656 657# Embedded system options 658INIT_PATH 659 660ROOTDEVNAME 661 662FDC_DEBUG opt_fdc.h 663PCFCLOCK_VERBOSE opt_pcfclock.h 664PCFCLOCK_MAX_RETRIES opt_pcfclock.h 665 666KTR opt_global.h 667KTR_ALQ opt_ktr.h 668KTR_MASK opt_ktr.h 669KTR_CPUMASK opt_ktr.h 670KTR_COMPILE opt_global.h 671KTR_BOOT_ENTRIES opt_global.h 672KTR_ENTRIES opt_global.h 673KTR_VERBOSE opt_ktr.h 674WITNESS opt_global.h 675WITNESS_KDB opt_witness.h 676WITNESS_NO_VNODE opt_witness.h 677WITNESS_SKIPSPIN opt_witness.h 678 679# options for ACPI support 680ACPI_DEBUG opt_acpi.h 681ACPI_MAX_TASKS opt_acpi.h 682ACPI_MAX_THREADS opt_acpi.h 683 684# ISA support 685DEV_ISA opt_isa.h 686ISAPNP opt_isa.h 687 688# various 'device presence' options. 689DEV_BPF opt_bpf.h 690DEV_NETMAP opt_global.h 691DEV_MCA opt_mca.h 692DEV_CARP opt_carp.h 693DEV_SPLASH opt_splash.h 694 695# EISA support 696DEV_EISA opt_eisa.h 697EISA_SLOTS opt_eisa.h 698 699# ed driver 700ED_HPP opt_ed.h 701ED_3C503 opt_ed.h 702ED_SIC opt_ed.h 703 704# bce driver 705BCE_DEBUG opt_bce.h 706BCE_NVRAM_WRITE_SUPPORT opt_bce.h 707 708# bxe driver 709BXE_DEBUG opt_bxe.h 710BXE_NVRAM_WRITE_SUPPORT opt_bxe.h 711 712SOCKBUF_DEBUG opt_global.h 713 714 715# options for ubsec driver 716UBSEC_DEBUG opt_ubsec.h 717UBSEC_RNDTEST opt_ubsec.h 718UBSEC_NO_RNG opt_ubsec.h 719 720# options for hifn driver 721HIFN_DEBUG opt_hifn.h 722HIFN_RNDTEST opt_hifn.h 723 724# options for safenet driver 725SAFE_DEBUG opt_safe.h 726SAFE_NO_RNG opt_safe.h 727SAFE_RNDTEST opt_safe.h 728 729# syscons options 730MAXCONS opt_syscons.h 731SC_ALT_MOUSE_IMAGE opt_syscons.h 732SC_CUT_SPACES2TABS opt_syscons.h 733SC_CUT_SEPCHARS opt_syscons.h 734SC_DEBUG_LEVEL opt_syscons.h 735SC_DFLT_FONT opt_syscons.h 736SC_DISABLE_KDBKEY opt_syscons.h 737SC_DISABLE_REBOOT opt_syscons.h 738SC_HISTORY_SIZE opt_syscons.h 739SC_KERNEL_CONS_ATTR opt_syscons.h 740SC_KERNEL_CONS_REV_ATTR opt_syscons.h 741SC_MOUSE_CHAR opt_syscons.h 742SC_NO_CUTPASTE opt_syscons.h 743SC_NO_FONT_LOADING opt_syscons.h 744SC_NO_HISTORY opt_syscons.h 745SC_NO_MODE_CHANGE opt_syscons.h 746SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 747SC_NO_SYSMOUSE opt_syscons.h 748SC_NORM_ATTR opt_syscons.h 749SC_NORM_REV_ATTR opt_syscons.h 750SC_PIXEL_MODE opt_syscons.h 751SC_RENDER_DEBUG opt_syscons.h 752SC_TWOBUTTON_MOUSE opt_syscons.h 753 754# teken terminal emulator options 755TEKEN_CONS25 opt_teken.h 756TEKEN_UTF8 opt_teken.h 757 758# options for printf 759PRINTF_BUFR_SIZE opt_printf.h 760 761# kbd options 762KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 763KBD_INSTALL_CDEV opt_kbd.h 764KBD_MAXRETRY opt_kbd.h 765KBD_MAXWAIT opt_kbd.h 766KBD_RESETDELAY opt_kbd.h 767KBDIO_DEBUG opt_kbd.h 768 769# options for the Atheros driver 770ATH_DEBUG opt_ath.h 771ATH_TXBUF opt_ath.h 772ATH_RXBUF opt_ath.h 773ATH_DIAGAPI opt_ath.h 774ATH_TX99_DIAG opt_ath.h 775ATH_ENABLE_11N opt_ath.h 776ATH_ENABLE_DFS opt_ath.h 777ATH_EEPROM_FIRMWARE opt_ath.h 778ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 779ATH_DEBUG_ALQ opt_ath.h 780ATH_KTR_INTR_DEBUG opt_ath.h 781 782# options for the Atheros hal 783AH_SUPPORT_AR5416 opt_ah.h 784# XXX For now, this breaks non-AR9130 chipsets, so only use it 785# XXX when actually targetting AR9130. 786AH_SUPPORT_AR9130 opt_ah.h 787 788AH_DEBUG opt_ah.h 789AH_ASSERT opt_ah.h 790AH_DEBUG_ALQ opt_ah.h 791AH_REGOPS_FUNC opt_ah.h 792AH_WRITE_REGDOMAIN opt_ah.h 793AH_DEBUG_COUNTRY opt_ah.h 794AH_WRITE_EEPROM opt_ah.h 795AH_PRIVATE_DIAG opt_ah.h 796AH_NEED_DESC_SWAP opt_ah.h 797AH_USE_INIPDGAIN opt_ah.h 798AH_MAXCHAN opt_ah.h 799AH_RXCFG_SDMAMW_4BYTES opt_ah.h 800AH_INTERRUPT_DEBUGGING opt_ah.h 801# AR5416 and later interrupt mitigation 802# XXX do not use this for AR9130 803AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 804 805# options for the Broadcom BCM43xx driver (bwi) 806BWI_DEBUG opt_bwi.h 807BWI_DEBUG_VERBOSE opt_bwi.h 808 809# options for the Marvell 8335 wireless driver 810MALO_DEBUG opt_malo.h 811MALO_TXBUF opt_malo.h 812MALO_RXBUF opt_malo.h 813 814# options for the Marvell wireless driver 815MWL_DEBUG opt_mwl.h 816MWL_TXBUF opt_mwl.h 817MWL_RXBUF opt_mwl.h 818MWL_DIAGAPI opt_mwl.h 819MWL_AGGR_SIZE opt_mwl.h 820MWL_TX_NODROP opt_mwl.h 821 822# dcons options 823DCONS_BUF_SIZE opt_dcons.h 824DCONS_POLL_HZ opt_dcons.h 825DCONS_FORCE_CONSOLE opt_dcons.h 826DCONS_FORCE_GDB opt_dcons.h 827 828# HWPMC options 829HWPMC_HOOKS 830HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 831 832# XBOX options for FreeBSD/i386, but some files are MI 833XBOX opt_xbox.h 834 835ZFS opt_dontuse.h 836 837# Interrupt filtering 838INTR_FILTER 839 840# 802.11 support layer 841IEEE80211_DEBUG opt_wlan.h 842IEEE80211_DEBUG_REFCNT opt_wlan.h 843IEEE80211_AMPDU_AGE opt_wlan.h 844IEEE80211_SUPPORT_MESH opt_wlan.h 845IEEE80211_SUPPORT_SUPERG opt_wlan.h 846IEEE80211_SUPPORT_TDMA opt_wlan.h 847IEEE80211_ALQ opt_wlan.h 848IEEE80211_DFS_DEBUG opt_wlan.h 849 850# 802.11 TDMA support 851TDMA_SLOTLEN_DEFAULT opt_tdma.h 852TDMA_SLOTCNT_DEFAULT opt_tdma.h 853TDMA_BINTVAL_DEFAULT opt_tdma.h 854TDMA_TXRATE_11B_DEFAULT opt_tdma.h 855TDMA_TXRATE_11G_DEFAULT opt_tdma.h 856TDMA_TXRATE_11A_DEFAULT opt_tdma.h 857TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 858TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 859TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 860TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 861TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 862 863# Network stack virtualization options 864VIMAGE opt_global.h 865VNET_DEBUG opt_global.h 866 867# Common Flash Interface (CFI) options 868CFI_SUPPORT_STRATAFLASH opt_cfi.h 869CFI_ARMEDANDDANGEROUS opt_cfi.h 870 871# Sound options 872SND_DEBUG opt_snd.h 873SND_DIAGNOSTIC opt_snd.h 874SND_FEEDER_MULTIFORMAT opt_snd.h 875SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 876SND_FEEDER_RATE_HP opt_snd.h 877SND_PCM_64 opt_snd.h 878SND_OLDSTEREO opt_snd.h 879 880X86BIOS 881 882# Flattened device tree options 883FDT opt_platform.h 884FDT_DTB_STATIC opt_platform.h 885 886# OFED Infiniband stack 887OFED opt_ofed.h 888OFED_DEBUG_INIT opt_ofed.h 889SDP opt_ofed.h 890SDP_DEBUG opt_ofed.h 891IPOIB opt_ofed.h 892IPOIB_DEBUG opt_ofed.h 893IPOIB_CM opt_ofed.h 894 895# Resource Accounting 896RACCT opt_global.h 897 898# Resource Limits 899RCTL opt_global.h 900