options revision 189851
1# $FreeBSD: head/sys/conf/options 189851 2009-03-15 14:21:05Z rwatson $
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AHC_ALLOW_MEMIO		opt_aic7xxx.h
35AHC_TMODE_ENABLE	opt_aic7xxx.h
36AHC_DUMP_EEPROM		opt_aic7xxx.h
37AHC_DEBUG		opt_aic7xxx.h
38AHC_DEBUG_OPTS		opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT	opt_aic7xxx.h
40AHD_DEBUG		opt_aic79xx.h
41AHD_DEBUG_OPTS		opt_aic79xx.h
42AHD_TMODE_ENABLE	opt_aic79xx.h	
43AHD_REG_PRETTY_PRINT	opt_aic79xx.h
44ADW_ALLOW_MEMIO		opt_adw.h
45
46TWA_DEBUG		opt_twa.h
47TWA_FLASH_FIRMWARE	opt_twa.h
48
49# Debugging options.
50DDB
51DDB_BUFR_SIZE	opt_ddb.h
52DDB_CAPTURE_DEFAULTBUFSIZE	opt_ddb.h
53DDB_CAPTURE_MAXBUFSIZE	opt_ddb.h
54DDB_CTF		opt_ddb.h
55DDB_NUMSYM	opt_ddb.h
56GDB
57KDB		opt_global.h
58KDB_TRACE	opt_kdb.h
59KDB_UNATTENDED	opt_kdb.h
60SYSCTL_DEBUG	opt_sysctl.h
61
62# Miscellaneous options.
63ADAPTIVE_SX
64ALQ
65AUDIT		opt_global.h
66CODA_COMPAT_5	opt_coda.h
67COMPAT_43	opt_compat.h
68COMPAT_43TTY	opt_compat.h
69COMPAT_FREEBSD4	opt_compat.h
70COMPAT_FREEBSD5	opt_compat.h
71COMPAT_FREEBSD6	opt_compat.h
72COMPAT_FREEBSD7	opt_compat.h
73COMPILING_LINT	opt_global.h
74CY_PCI_FASTINTR
75DIRECTIO
76FULL_PREEMPTION	opt_sched.h
77IPI_PREEMPTION	opt_sched.h
78GEOM_AES	opt_geom.h
79GEOM_BDE	opt_geom.h
80GEOM_BSD	opt_geom.h
81GEOM_CACHE	opt_geom.h
82GEOM_CONCAT	opt_geom.h
83GEOM_ELI	opt_geom.h
84GEOM_FOX	opt_geom.h
85GEOM_GATE	opt_geom.h
86GEOM_JOURNAL	opt_geom.h
87GEOM_LABEL	opt_geom.h
88GEOM_LINUX_LVM	opt_geom.h
89GEOM_MBR	opt_geom.h
90GEOM_MIRROR	opt_geom.h
91GEOM_MULTIPATH	opt_geom.h
92GEOM_NOP	opt_geom.h
93GEOM_PART_APM	opt_geom.h
94GEOM_PART_BSD	opt_geom.h
95GEOM_PART_EBR	opt_geom.h
96GEOM_PART_GPT	opt_geom.h
97GEOM_PART_MBR	opt_geom.h
98GEOM_PART_PC98	opt_geom.h
99GEOM_PART_VTOC8	opt_geom.h
100GEOM_PC98	opt_geom.h
101GEOM_RAID3	opt_geom.h
102GEOM_SHSEC	opt_geom.h
103GEOM_STRIPE	opt_geom.h
104GEOM_SUNLABEL	opt_geom.h
105GEOM_UZIP	opt_geom.h
106GEOM_VIRSTOR	opt_geom.h
107GEOM_VOL	opt_geom.h
108GEOM_ZERO	opt_geom.h
109KDTRACE_HOOKS	opt_kdtrace.h
110KSTACK_MAX_PAGES
111KSTACK_PAGES
112KTRACE
113KTRACE_REQUEST_POOL	opt_ktrace.h
114LIBICONV
115MAC
116MAC_BIBA	opt_dontuse.h
117MAC_BSDEXTENDED	opt_dontuse.h
118MAC_IFOFF	opt_dontuse.h
119MAC_LOMAC	opt_dontuse.h
120MAC_MLS		opt_dontuse.h
121MAC_NONE	opt_dontuse.h
122MAC_PARTITION	opt_dontuse.h
123MAC_PORTACL	opt_dontuse.h
124MAC_SEEOTHERUIDS	opt_dontuse.h
125MAC_STATIC	opt_mac.h
126MAC_STUB	opt_dontuse.h
127MAC_TEST	opt_dontuse.h
128MD_ROOT		opt_md.h
129MD_ROOT_SIZE	opt_md.h
130MFI_DEBUG	opt_mfi.h
131MFI_DECODE_LOG	opt_mfi.h
132MPROF_BUFFERS	opt_mprof.h
133MPROF_HASH_SIZE	opt_mprof.h
134NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
135NO_ADAPTIVE_RWLOCKS
136NO_SYSCTL_DESCR	opt_global.h
137NSWBUF_MIN	opt_swap.h
138MBUF_PACKET_ZONE_DISABLE	opt_global.h
139PANIC_REBOOT_WAIT_TIME	opt_panic.h
140PPC_DEBUG	opt_ppc.h
141PPC_PROBE_CHIPSET	opt_ppc.h
142PPS_SYNC	opt_ntp.h
143PREEMPTION	opt_sched.h
144QUOTA
145SCHED_4BSD	opt_sched.h
146SCHED_STATS	opt_sched.h
147SCHED_ULE	opt_sched.h
148SHOW_BUSYBUFS
149SLEEPQUEUE_PROFILING
150SLHCI_DEBUG	opt_slhci.h
151SPX_HACK
152STACK		opt_stack.h
153SUIDDIR
154MSGMNB		opt_sysvipc.h
155MSGMNI		opt_sysvipc.h
156MSGSEG		opt_sysvipc.h
157MSGSSZ		opt_sysvipc.h
158MSGTQL		opt_sysvipc.h
159SEMMAP		opt_sysvipc.h
160SEMMNI		opt_sysvipc.h
161SEMMNS		opt_sysvipc.h
162SEMMNU		opt_sysvipc.h
163SEMMSL		opt_sysvipc.h
164SEMOPM		opt_sysvipc.h
165SEMUME		opt_sysvipc.h
166SHMALL		opt_sysvipc.h
167SHMMAX		opt_sysvipc.h
168SHMMAXPGS	opt_sysvipc.h
169SHMMIN		opt_sysvipc.h
170SHMMNI		opt_sysvipc.h
171SHMSEG		opt_sysvipc.h
172SYSVMSG		opt_sysvipc.h
173SYSVSEM		opt_sysvipc.h
174SYSVSHM		opt_sysvipc.h
175SW_WATCHDOG	opt_watchdog.h
176TURNSTILE_PROFILING
177VFS_AIO
178VERBOSE_SYSINIT	opt_global.h
179WLCACHE		opt_wavelan.h
180WLDEBUG		opt_wavelan.h
181
182# POSIX kernel options
183P1003_1B_MQUEUE			opt_posix.h
184P1003_1B_SEMAPHORES		opt_posix.h
185_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
186
187# Do we want the config file compiled into the kernel?
188INCLUDE_CONFIG_FILE	opt_config.h
189
190# Options for static filesystems.  These should only be used at config
191# time, since the corresponding lkms cannot work if there are any static
192# dependencies.  Unusability is enforced by hiding the defines for the
193# options in a never-included header.
194CD9660		opt_dontuse.h
195CODA		opt_dontuse.h
196EXT2FS		opt_dontuse.h
197FDESCFS		opt_dontuse.h
198HPFS		opt_dontuse.h
199MSDOSFS		opt_dontuse.h
200NTFS		opt_dontuse.h
201NULLFS		opt_dontuse.h
202NWFS		opt_dontuse.h
203PORTALFS	opt_dontuse.h
204PROCFS		opt_dontuse.h
205PSEUDOFS	opt_dontuse.h
206REISERFS	opt_dontuse.h
207SMBFS		opt_dontuse.h
208TMPFS		opt_dontuse.h
209UDF		opt_dontuse.h
210UNIONFS		opt_dontuse.h
211
212# Pseudofs debugging
213PSEUDOFS_TRACE	opt_pseudofs.h
214
215# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
216FFS		opt_ffs_broken_fixme.h
217
218# In-kernel GSS-API
219KGSSAPI		opt_kgssapi.h
220KGSSAPI_DEBUG	opt_kgssapi.h
221
222# These static filesystems have one slightly bogus static dependency in
223# sys/i386/i386/autoconf.c.  If any of these filesystems are
224# statically compiled into the kernel, code for mounting them as root
225# filesystems will be enabled - but look below.
226NFSCLIENT	opt_nfs.h
227NFSSERVER	opt_nfs.h
228NFS4CLIENT	opt_nfs.h
229
230# Use this option to compile both NFS client and server using the
231# legacy RPC implementation instead of the newer KRPC system (which
232# supports modern features such as RPCSEC_GSS
233NFS_LEGACYRPC	opt_nfs.h
234
235# filesystems and libiconv bridge
236CD9660_ICONV	opt_dontuse.h
237MSDOSFS_ICONV	opt_dontuse.h
238NTFS_ICONV	opt_dontuse.h
239UDF_ICONV	opt_dontuse.h
240
241# If you are following the conditions in the copyright,
242# you can enable soft-updates which will speed up a lot of thigs
243# and make the system safer from crashes at the same time.
244# otherwise a STUB module will be compiled in.
245SOFTUPDATES	opt_ffs.h
246
247# On small, embedded systems, it can be useful to turn off support for
248# snapshots.  It saves about 30-40k for a feature that would be lightly
249# used, if it is used at all.
250NO_FFS_SNAPSHOT	opt_ffs.h
251
252# Enabling this option turns on support for Access Control Lists in UFS,
253# which can be used to support high security configurations.  Depends on
254# UFS_EXTATTR.
255UFS_ACL		opt_ufs.h
256
257# Enabling this option turns on support for extended attributes in UFS-based
258# filesystems, which can be used to support high security configurations
259# as well as new filesystem features.
260UFS_EXTATTR	opt_ufs.h
261UFS_EXTATTR_AUTOSTART	opt_ufs.h
262
263# Enable fast hash lookups for large directories on UFS-based filesystems.
264UFS_DIRHASH	opt_ufs.h
265
266# Enable gjournal-based UFS journal.
267UFS_GJOURNAL	opt_ufs.h
268
269# The below sentence is not in English, and neither is this one.
270# We plan to remove the static dependences above, with a
271# <filesystem>_ROOT option to control if it usable as root.  This list
272# allows these options to be present in config files already (though
273# they won't make any difference yet).
274NFS_ROOT	opt_nfsroot.h
275
276# SMB/CIFS requester
277NETSMB		opt_netsmb.h
278
279# Options used only in subr_param.c.
280HZ		opt_param.h
281MAXFILES	opt_param.h
282NBUF		opt_param.h
283NSFBUFS		opt_param.h
284VM_BCACHE_SIZE_MAX	opt_param.h
285VM_SWZONE_SIZE_MAX	opt_param.h
286MAXUSERS
287DFLDSIZ		opt_param.h
288MAXDSIZ		opt_param.h
289MAXSSIZ		opt_param.h
290
291# Generic SCSI options.
292CAM_MAX_HIGHPOWER	opt_cam.h
293CAMDEBUG		opt_cam.h
294CAM_DEBUG_DELAY		opt_cam.h
295CAM_DEBUG_BUS		opt_cam.h
296CAM_DEBUG_TARGET	opt_cam.h
297CAM_DEBUG_LUN		opt_cam.h
298CAM_DEBUG_FLAGS		opt_cam.h
299SCSI_DELAY		opt_scsi.h
300SCSI_NO_SENSE_STRINGS	opt_scsi.h
301SCSI_NO_OP_STRINGS	opt_scsi.h
302
303# Options used only in cam/scsi/scsi_cd.c
304CHANGER_MIN_BUSY_SECONDS	opt_cd.h
305CHANGER_MAX_BUSY_SECONDS	opt_cd.h
306
307# Options used only in cam/scsi/scsi_sa.c.
308SA_IO_TIMEOUT		opt_sa.h
309SA_SPACE_TIMEOUT	opt_sa.h
310SA_REWIND_TIMEOUT	opt_sa.h
311SA_ERASE_TIMEOUT	opt_sa.h
312SA_1FM_AT_EOD		opt_sa.h
313
314# Options used only in cam/scsi/scsi_pt.c
315SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
316
317# Options used only in cam/scsi/scsi_ses.c
318SES_ENABLE_PASSTHROUGH	opt_ses.h
319
320# Options used in dev/sym/ (Symbios SCSI driver).
321SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
322					# Allows the ncr to take precedence
323					# 1 (1<<0) -> 810a, 860
324					# 2 (1<<1) -> 825a, 875, 885, 895
325					# 4 (1<<2) -> 895a, 896, 1510d 
326SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
327					# disabled:0 (default), enabled:1
328SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
329					# disabled:0, enabled:1 (default)
330SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
331					# default:8, range:[1..64]
332
333# Options used only in pci/ncr.c
334SCSI_NCR_DEBUG		opt_ncr.h
335SCSI_NCR_MAX_SYNC	opt_ncr.h
336SCSI_NCR_MAX_WIDE	opt_ncr.h
337SCSI_NCR_MYADDR		opt_ncr.h
338
339# Options used only in dev/isp/*
340ISP_TARGET_MODE		opt_isp.h
341ISP_FW_CRASH_DUMP	opt_isp.h
342ISP_DEFAULT_ROLES	opt_isp.h
343
344# Options used only in dev/iscsi
345ISCSI_INITIATOR_DEBUG	opt_iscsi_initiator.h
346
347# Options used in the 'ata' ATA/ATAPI driver
348ATA_STATIC_ID		opt_ata.h
349ATA_NOPCI		opt_ata.h
350
351# Net stuff.
352ACCEPT_FILTER_DATA
353ACCEPT_FILTER_DNS
354ACCEPT_FILTER_HTTP
355ALTQ			opt_global.h
356ALTQ_CBQ		opt_altq.h
357ALTQ_CDNR		opt_altq.h
358ALTQ_DEBUG		opt_altq.h
359ALTQ_HFSC		opt_altq.h
360ALTQ_NOPCC		opt_altq.h
361ALTQ_PRIQ		opt_altq.h
362ALTQ_RED		opt_altq.h
363ALTQ_RIO		opt_altq.h
364BOOTP			opt_bootp.h
365BOOTP_BLOCKSIZE		opt_bootp.h
366BOOTP_COMPAT		opt_bootp.h
367BOOTP_NFSROOT		opt_bootp.h
368BOOTP_NFSV3		opt_bootp.h
369BOOTP_WIRED_TO		opt_bootp.h
370DEVICE_POLLING
371DEV_ENC			opt_enc.h
372DEV_PF			opt_pf.h
373DEV_PFLOG		opt_pf.h
374DEV_PFSYNC		opt_pf.h
375DEV_VLAN		opt_vlan.h
376DUMMYNET		opt_ipdn.h
377ETHER_8022		opt_ef.h
378ETHER_8023		opt_ef.h
379ETHER_II		opt_ef.h
380ETHER_SNAP		opt_ef.h
381INET			opt_inet.h
382INET6			opt_inet6.h
383IPDIVERT
384IPFILTER		opt_ipfilter.h
385IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
386IPFILTER_LOG		opt_ipfilter.h
387IPFILTER_LOOKUP		opt_ipfilter.h
388IPFIREWALL		opt_ipfw.h
389IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
390IPFIREWALL_FORWARD	opt_ipfw.h
391IPFIREWALL_NAT		opt_ipfw.h
392IPFIREWALL_VERBOSE	opt_ipfw.h
393IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
394IPSEC			opt_ipsec.h
395IPSEC_DEBUG		opt_ipsec.h
396IP_NONLOCALBIND		opt_inet.h
397IPSEC_FILTERTUNNEL	opt_ipsec.h
398IPSTEALTH
399IPX
400KRPC
401LIBALIAS
402LIBMBPOOL
403LIBMCHAIN
404MBUF_PROFILING
405MBUF_STRESS_TEST
406MROUTING		opt_mrouting.h
407NCP
408NETATALK		opt_atalk.h
409NFSLOCKD
410RADIX_MPATH		opt_mpath.h
411ROUTETABLES		opt_route.h
412COMPAT_ROUTE_FLAGS	opt_route.h
413SLIP_IFF_OPTS		opt_slip.h
414TCPDEBUG
415TCP_OFFLOAD_DISABLE	opt_inet.h #Disable code to dispatch tcp offloading
416TCP_SIGNATURE		opt_inet.h
417VLAN_ARRAY		opt_vlan.h
418XBONEHACK
419
420#
421# SCTP
422#
423SCTP			opt_sctp.h
424SCTP_DEBUG		opt_sctp.h # Enable debug printfs
425SCTP_WITH_NO_CSUM	opt_sctp.h # Use this at your peril
426SCTP_LOCK_LOGGING	opt_sctp.h # Log to KTR lock activity
427SCTP_MBUF_LOGGING	opt_sctp.h # Log to KTR general mbuf aloc/free
428SCTP_MBCNT_LOGGING	opt_sctp.h # Log to KTR mbcnt activity
429SCTP_PACKET_LOGGING	opt_sctp.h # Log to a packet buffer last N packets
430SCTP_LTRACE_CHUNKS	opt_sctp.h # Log to KTR chunks processed
431SCTP_LTRACE_ERRORS	opt_sctp.h # Log to KTR error returns.
432#
433#
434#
435
436# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
437# Each netgraph node type can be either be compiled into the kernel
438# or loaded dynamically. To get the former, include the corresponding
439# option below. Each type has its own man page, e.g. ng_async(4).
440NETGRAPH
441NETGRAPH_DEBUG		opt_netgraph.h
442NETGRAPH_ASYNC		opt_netgraph.h
443NETGRAPH_ATMLLC		opt_netgraph.h
444NETGRAPH_ATM_ATMPIF	opt_netgraph.h
445NETGRAPH_BLUETOOTH	opt_netgraph.h
446NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
447NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
448NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
449NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
450NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
451NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
452NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
453NETGRAPH_BPF		opt_netgraph.h
454NETGRAPH_BRIDGE		opt_netgraph.h
455NETGRAPH_CAR		opt_netgraph.h
456NETGRAPH_CISCO		opt_netgraph.h
457NETGRAPH_DEFLATE	opt_netgraph.h
458NETGRAPH_DEVICE		opt_netgraph.h
459NETGRAPH_ECHO		opt_netgraph.h
460NETGRAPH_EIFACE		opt_netgraph.h
461NETGRAPH_ETHER		opt_netgraph.h
462NETGRAPH_ETHER_ECHO	opt_netgraph.h
463NETGRAPH_FEC		opt_netgraph.h
464NETGRAPH_FRAME_RELAY	opt_netgraph.h
465NETGRAPH_GIF		opt_netgraph.h
466NETGRAPH_GIF_DEMUX	opt_netgraph.h
467NETGRAPH_HOLE		opt_netgraph.h
468NETGRAPH_IFACE		opt_netgraph.h
469NETGRAPH_IP_INPUT	opt_netgraph.h
470NETGRAPH_IPFW		opt_netgraph.h
471NETGRAPH_KSOCKET	opt_netgraph.h
472NETGRAPH_L2TP		opt_netgraph.h
473NETGRAPH_LMI		opt_netgraph.h
474# MPPC compression requires proprietary files (not included)
475NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
476NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
477NETGRAPH_NAT		opt_netgraph.h
478NETGRAPH_NETFLOW	opt_netgraph.h
479NETGRAPH_ONE2MANY	opt_netgraph.h
480NETGRAPH_PPP		opt_netgraph.h
481NETGRAPH_PPPOE		opt_netgraph.h
482NETGRAPH_PPTPGRE	opt_netgraph.h
483NETGRAPH_PRED1		opt_netgraph.h
484NETGRAPH_RFC1490	opt_netgraph.h
485NETGRAPH_SOCKET		opt_netgraph.h
486NETGRAPH_SPLIT		opt_netgraph.h
487NETGRAPH_SPPP		opt_netgraph.h
488NETGRAPH_TAG		opt_netgraph.h
489NETGRAPH_TCPMSS		opt_netgraph.h
490NETGRAPH_TEE		opt_netgraph.h
491NETGRAPH_TTY		opt_netgraph.h
492NETGRAPH_UI		opt_netgraph.h
493NETGRAPH_VJC		opt_netgraph.h
494
495# NgATM options
496NGATM_ATM		opt_netgraph.h
497NGATM_ATMBASE		opt_netgraph.h
498NGATM_SSCOP		opt_netgraph.h
499NGATM_SSCFU		opt_netgraph.h
500NGATM_UNI		opt_netgraph.h
501NGATM_CCATM		opt_netgraph.h
502
503# DRM options
504DRM_DEBUG		opt_drm.h
505
506ZERO_COPY_SOCKETS	opt_zero.h
507TI_PRIVATE_JUMBOS	opt_ti.h
508TI_JUMBO_HDRSPLIT	opt_ti.h
509
510# XXX Conflict: # of devices vs network protocol (Native ATM).
511# This makes "atm.h" unusable.
512NATM
513
514# DPT driver debug flags
515DPT_MEASURE_PERFORMANCE	opt_dpt.h
516DPT_HANDLE_TIMEOUTS	opt_dpt.h
517DPT_TIMEOUT_FACTOR	opt_dpt.h
518DPT_LOST_IRQ		opt_dpt.h
519DPT_RESET_HBA		opt_dpt.h
520
521# Misc debug flags.  Most of these should probably be replaced with
522# 'DEBUG', and then let people recompile just the interesting modules
523# with 'make CC="cc -DDEBUG"'.
524CLUSTERDEBUG		opt_debug_cluster.h
525DEBUG_1284		opt_ppb_1284.h
526VP0_DEBUG		opt_vpo.h
527LPT_DEBUG		opt_lpt.h
528PLIP_DEBUG		opt_plip.h
529LOCKF_DEBUG		opt_debug_lockf.h
530NETATALKDEBUG		opt_atalk.h
531SI_DEBUG		opt_debug_si.h
532
533# Fb options
534FB_DEBUG		opt_fb.h
535FB_INSTALL_CDEV		opt_fb.h
536
537# ppbus related options
538PERIPH_1284		opt_ppb_1284.h
539DONTPROBE_1284		opt_ppb_1284.h
540
541# smbus related options
542ENABLE_ALART		opt_intpm.h
543
544# These cause changes all over the kernel
545BLKDEV_IOSIZE		opt_global.h
546BURN_BRIDGES		opt_global.h
547DEBUG			opt_global.h
548DEBUG_LOCKS		opt_global.h
549DEBUG_VFS_LOCKS		opt_global.h
550DFLTPHYS		opt_global.h
551DIAGNOSTIC		opt_global.h
552INVARIANT_SUPPORT	opt_global.h
553INVARIANTS		opt_global.h
554MAXPHYS			opt_global.h
555MCLSHIFT		opt_global.h
556MUTEX_DEBUG		opt_global.h
557MUTEX_NOINLINE		opt_global.h
558LOCK_PROFILING		opt_global.h
559LOCK_PROFILING_FAST	opt_global.h
560MSIZE			opt_global.h
561REGRESSION		opt_global.h
562RESTARTABLE_PANICS	opt_global.h
563RWLOCK_NOINLINE		opt_global.h
564SX_NOINLINE		opt_global.h
565VFS_BIO_DEBUG		opt_global.h
566
567# These are VM related options
568VM_KMEM_SIZE		opt_vm.h
569VM_KMEM_SIZE_SCALE	opt_vm.h
570VM_KMEM_SIZE_MAX	opt_vm.h
571VM_NRESERVLEVEL		opt_vm.h
572VM_LEVEL_0_ORDER	opt_vm.h
573NO_SWAPPING		opt_vm.h
574MALLOC_MAKE_FAILURES	opt_vm.h
575MALLOC_PROFILE		opt_vm.h
576
577# The MemGuard replacement allocator used for tamper-after-free detection
578DEBUG_MEMGUARD		opt_vm.h
579
580# The RedZone malloc(9) protection
581DEBUG_REDZONE		opt_vm.h
582
583# Standard SMP options
584SMP			opt_global.h
585
586# Size of the kernel message buffer
587MSGBUF_SIZE		opt_msgbuf.h
588
589# NFS options
590NFS_MINATTRTIMO		opt_nfs.h
591NFS_MAXATTRTIMO		opt_nfs.h
592NFS_MINDIRATTRTIMO	opt_nfs.h
593NFS_MAXDIRATTRTIMO	opt_nfs.h
594NFS_GATHERDELAY		opt_nfs.h
595NFS_WDELAYHASHSIZ	opt_nfs.h
596NFS_DEBUG		opt_nfs.h
597
598# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
599OVERRIDE_CARD			opt_bktr.h
600OVERRIDE_TUNER			opt_bktr.h
601OVERRIDE_DBX			opt_bktr.h
602OVERRIDE_MSP			opt_bktr.h
603BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
604BROOKTREE_ALLOC_PAGES		opt_bktr.h
605BKTR_OVERRIDE_CARD		opt_bktr.h
606BKTR_OVERRIDE_TUNER		opt_bktr.h
607BKTR_OVERRIDE_DBX		opt_bktr.h
608BKTR_OVERRIDE_MSP		opt_bktr.h
609BKTR_SYSTEM_DEFAULT		opt_bktr.h
610BKTR_ALLOC_PAGES		opt_bktr.h
611BKTR_USE_PLL			opt_bktr.h	
612BKTR_GPIO_ACCESS		opt_bktr.h
613BKTR_NO_MSP_RESET		opt_bktr.h
614BKTR_430_FX_MODE		opt_bktr.h
615BKTR_SIS_VIA_MODE		opt_bktr.h
616BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
617BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
618
619BREAK_TO_DEBUGGER	opt_comconsole.h
620ALT_BREAK_TO_DEBUGGER	opt_comconsole.h
621
622# Options to support PPS
623UART_PPS_ON_CTS		opt_uart.h
624
625# options for bus/device framework
626BUS_DEBUG		opt_bus.h
627
628# options for USB support
629USB_DEBUG		opt_usb.h
630USBVERBOSE		opt_usb.h
631USB_EHCI_BIG_ENDIAN_DESC	opt_usb.h
632U3G_DEBUG		opt_u3g.h
633UKBD_DFLT_KEYMAP	opt_ukbd.h
634UPLCOM_INTR_INTERVAL	opt_uplcom.h
635UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
636UVSCOM_INTR_INTERVAL	opt_uvscom.h
637
638# Embedded system options
639INIT_PATH
640
641ROOTDEVNAME
642
643FDC_DEBUG		opt_fdc.h
644PCFCLOCK_VERBOSE	opt_pcfclock.h
645PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
646
647KTR			opt_global.h
648KTR_ALQ			opt_ktr.h
649KTR_MASK		opt_ktr.h
650KTR_CPUMASK		opt_ktr.h
651KTR_COMPILE		opt_global.h
652KTR_ENTRIES		opt_global.h
653KTR_VERBOSE		opt_ktr.h
654WITNESS			opt_global.h
655WITNESS_KDB		opt_witness.h
656WITNESS_SKIPSPIN	opt_witness.h
657
658# options for ACPI support
659ACPI_DEBUG		opt_acpi.h
660ACPI_MAX_THREADS	opt_acpi.h
661ACPI_NO_SEMAPHORES	opt_acpi.h
662
663# ISA support
664DEV_ISA			opt_isa.h
665ISAPNP			opt_isa.h
666
667# various 'device presence' options.
668DEV_BPF			opt_bpf.h
669DEV_MCA			opt_mca.h
670DEV_CARP		opt_carp.h
671DEV_PTY			opt_tty.h
672DEV_SPLASH		opt_splash.h
673
674# EISA support
675DEV_EISA		opt_eisa.h
676EISA_SLOTS		opt_eisa.h
677
678# ed driver
679ED_HPP			opt_ed.h
680ED_3C503		opt_ed.h
681ED_SIC			opt_ed.h
682
683# bce driver
684BCE_DEBUG		opt_bce.h
685
686SOCKBUF_DEBUG		opt_global.h
687
688# options for ubsec driver
689UBSEC_DEBUG		opt_ubsec.h
690UBSEC_RNDTEST		opt_ubsec.h
691UBSEC_NO_RNG		opt_ubsec.h
692
693# options for hifn driver
694HIFN_DEBUG		opt_hifn.h
695HIFN_RNDTEST		opt_hifn.h
696
697# options for safenet driver
698SAFE_DEBUG		opt_safe.h
699SAFE_NO_RNG		opt_safe.h
700SAFE_RNDTEST		opt_safe.h
701
702# syscons options
703MAXCONS			opt_syscons.h
704SC_ALT_MOUSE_IMAGE	opt_syscons.h
705SC_CUT_SPACES2TABS	opt_syscons.h
706SC_CUT_SEPCHARS		opt_syscons.h
707SC_DEBUG_LEVEL		opt_syscons.h
708SC_DFLT_FONT		opt_syscons.h
709SC_DISABLE_KDBKEY	opt_syscons.h
710SC_DISABLE_REBOOT	opt_syscons.h
711SC_HISTORY_SIZE		opt_syscons.h
712SC_KERNEL_CONS_ATTR	opt_syscons.h
713SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
714SC_MOUSE_CHAR		opt_syscons.h
715SC_NO_CUTPASTE		opt_syscons.h
716SC_NO_FONT_LOADING	opt_syscons.h
717SC_NO_HISTORY		opt_syscons.h
718SC_NO_MODE_CHANGE	opt_syscons.h
719SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
720SC_NO_SYSMOUSE		opt_syscons.h
721SC_NORM_ATTR		opt_syscons.h
722SC_NORM_REV_ATTR	opt_syscons.h
723SC_PIXEL_MODE		opt_syscons.h
724SC_RENDER_DEBUG		opt_syscons.h
725SC_TWOBUTTON_MOUSE	opt_syscons.h
726
727# teken terminal emulator options
728TEKEN_UTF8		opt_teken.h
729TEKEN_XTERM		opt_teken.h
730
731# options for printf
732PRINTF_BUFR_SIZE	opt_printf.h
733
734# kbd options
735KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
736KBD_INSTALL_CDEV	opt_kbd.h
737KBD_MAXRETRY		opt_kbd.h
738KBD_MAXWAIT		opt_kbd.h
739KBD_RESETDELAY		opt_kbd.h
740KBDIO_DEBUG		opt_kbd.h
741
742# options for the Atheros driver
743ATH_DEBUG		opt_ath.h
744ATH_TXBUF		opt_ath.h
745ATH_RXBUF		opt_ath.h
746ATH_DIAGAPI		opt_ath.h
747ATH_TX99_DIAG		opt_ath.h
748ATH_SUPPORT_TDMA	opt_ath.h
749
750# options for the Atheros hal
751AH_SUPPORT_AR5416	opt_ah.h
752
753AH_DEBUG		opt_ah.h
754AH_ASSERT		opt_ah.h
755AH_DEBUG_ALQ		opt_ah.h
756AH_REGOPS_FUNC		opt_ah.h
757AH_WRITE_REGDOMAIN	opt_ah.h
758AH_DEBUG_COUNTRY	opt_ah.h
759AH_WRITE_EEPROM		opt_ah.h
760AH_PRIVATE_DIAG		opt_ah.h
761AH_NEED_DESC_SWAP	opt_ah.h
762AH_USE_INIPDGAIN	opt_ah.h
763AH_MAXCHAN		opt_ah.h
764
765# options for the Marvell 8335 wireless driver
766MALO_DEBUG		opt_malo.h
767MALO_TXBUF		opt_malo.h
768MALO_RXBUF		opt_malo.h
769
770# dcons options 
771DCONS_BUF_SIZE		opt_dcons.h
772DCONS_POLL_HZ		opt_dcons.h
773DCONS_FORCE_CONSOLE	opt_dcons.h
774DCONS_FORCE_GDB		opt_dcons.h
775
776# HWPMC options
777HWPMC_HOOKS
778
779# XBOX options for FreeBSD/i386, but some files are MI
780XBOX			opt_xbox.h
781
782# XFS
783XFS
784
785# Interrupt filtering
786INTR_FILTER
787
788# 802.11 support layer
789IEEE80211_DEBUG		opt_wlan.h
790IEEE80211_DEBUG_REFCNT	opt_wlan.h
791IEEE80211_AMPDU_AGE	opt_wlan.h
792IEEE80211_SUPPORT_TDMA	opt_wlan.h
793
794# 802.11 TDMA support
795TDMA_SLOTLEN_DEFAULT	opt_tdma.h
796TDMA_SLOTCNT_DEFAULT	opt_tdma.h
797TDMA_BINTVAL_DEFAULT	opt_tdma.h
798TDMA_TXRATE_11B_DEFAULT	opt_tdma.h
799TDMA_TXRATE_11G_DEFAULT	opt_tdma.h
800TDMA_TXRATE_11A_DEFAULT	opt_tdma.h
801
802# Virtualize the network stack
803VIMAGE			opt_global.h
804VIMAGE_GLOBALS		opt_global.h
805
806# Common Flash Interface (CFI) options
807CFI_SUPPORT_STRATAFLASH	opt_cfi.h
808CFI_ARMEDANDDANGEROUS	opt_cfi.h
809