options revision 188156
1# $FreeBSD: head/sys/conf/options 188156 2009-02-05 18:12:07Z sam $
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AHC_ALLOW_MEMIO		opt_aic7xxx.h
35AHC_TMODE_ENABLE	opt_aic7xxx.h
36AHC_DUMP_EEPROM		opt_aic7xxx.h
37AHC_DEBUG		opt_aic7xxx.h
38AHC_DEBUG_OPTS		opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT    opt_aic7xxx.h
40AHD_DEBUG		opt_aic79xx.h
41AHD_DEBUG_OPTS		opt_aic79xx.h
42AHD_TMODE_ENABLE	opt_aic79xx.h	
43AHD_REG_PRETTY_PRINT	opt_aic79xx.h
44ADW_ALLOW_MEMIO		opt_adw.h
45
46TWA_DEBUG		opt_twa.h
47TWA_FLASH_FIRMWARE	opt_twa.h
48
49# Debugging options.
50DDB
51DDB_BUFR_SIZE	opt_ddb.h
52DDB_CAPTURE_DEFAULTBUFSIZE	opt_ddb.h
53DDB_CAPTURE_MAXBUFSIZE	opt_ddb.h
54DDB_CTF		opt_ddb.h
55DDB_NUMSYM	opt_ddb.h
56GDB
57KDB		opt_global.h
58KDB_TRACE	opt_kdb.h
59KDB_UNATTENDED	opt_kdb.h
60SYSCTL_DEBUG	opt_sysctl.h
61
62# Miscellaneous options.
63ADAPTIVE_SX
64ALQ
65AUDIT		opt_global.h
66CODA_COMPAT_5	opt_coda.h
67COMPAT_43	opt_compat.h
68COMPAT_43TTY	opt_compat.h
69COMPAT_FREEBSD4	opt_compat.h
70COMPAT_FREEBSD5	opt_compat.h
71COMPAT_FREEBSD6	opt_compat.h
72COMPAT_FREEBSD7	opt_compat.h
73COMPILING_LINT	opt_global.h
74CY_PCI_FASTINTR
75DIRECTIO
76FULL_PREEMPTION	opt_sched.h
77IPI_PREEMPTION	opt_sched.h
78GEOM_AES	opt_geom.h
79GEOM_BDE	opt_geom.h
80GEOM_BSD	opt_geom.h
81GEOM_CACHE	opt_geom.h
82GEOM_CONCAT	opt_geom.h
83GEOM_ELI	opt_geom.h
84GEOM_FOX	opt_geom.h
85GEOM_GATE	opt_geom.h
86GEOM_JOURNAL	opt_geom.h
87GEOM_LABEL	opt_geom.h
88GEOM_LINUX_LVM	opt_geom.h
89GEOM_MBR	opt_geom.h
90GEOM_MIRROR	opt_geom.h
91GEOM_MULTIPATH	opt_geom.h
92GEOM_NOP	opt_geom.h
93GEOM_PART_APM	opt_geom.h
94GEOM_PART_BSD	opt_geom.h
95GEOM_PART_GPT	opt_geom.h
96GEOM_PART_MBR	opt_geom.h
97GEOM_PART_PC98	opt_geom.h
98GEOM_PART_VTOC8	opt_geom.h
99GEOM_PC98	opt_geom.h
100GEOM_RAID3	opt_geom.h
101GEOM_SHSEC	opt_geom.h
102GEOM_STRIPE	opt_geom.h
103GEOM_SUNLABEL	opt_geom.h
104GEOM_UZIP	opt_geom.h
105GEOM_VIRSTOR	opt_geom.h
106GEOM_VOL	opt_geom.h
107GEOM_ZERO	opt_geom.h
108KDTRACE_HOOKS	opt_kdtrace.h
109KSTACK_MAX_PAGES
110KSTACK_PAGES
111KTRACE
112KTRACE_REQUEST_POOL	opt_ktrace.h
113LIBICONV
114MAC
115MAC_BIBA	opt_dontuse.h
116MAC_BSDEXTENDED	opt_dontuse.h
117MAC_IFOFF	opt_dontuse.h
118MAC_LOMAC	opt_dontuse.h
119MAC_MLS		opt_dontuse.h
120MAC_NONE	opt_dontuse.h
121MAC_PARTITION	opt_dontuse.h
122MAC_PORTACL	opt_dontuse.h
123MAC_SEEOTHERUIDS	opt_dontuse.h
124MAC_STATIC	opt_mac.h
125MAC_STUB	opt_dontuse.h
126MAC_TEST	opt_dontuse.h
127MD_ROOT		opt_md.h
128MD_ROOT_SIZE	opt_md.h
129MFI_DEBUG	opt_mfi.h
130MFI_DECODE_LOG	opt_mfi.h
131MPROF_BUFFERS	opt_mprof.h
132MPROF_HASH_SIZE	opt_mprof.h
133NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
134NO_ADAPTIVE_RWLOCKS
135NO_SYSCTL_DESCR	opt_global.h
136NSWBUF_MIN	opt_swap.h
137MBUF_PACKET_ZONE_DISABLE	opt_global.h
138PANIC_REBOOT_WAIT_TIME	opt_panic.h
139PPC_DEBUG	opt_ppc.h
140PPC_PROBE_CHIPSET opt_ppc.h
141PPS_SYNC	opt_ntp.h
142PREEMPTION	opt_sched.h
143QUOTA
144SCHED_4BSD	opt_sched.h
145SCHED_STATS	opt_sched.h
146SCHED_ULE	opt_sched.h
147SHOW_BUSYBUFS
148SLEEPQUEUE_PROFILING
149SLHCI_DEBUG	opt_slhci.h
150SPX_HACK
151STACK		opt_stack.h
152SUIDDIR
153MSGMNB		opt_sysvipc.h
154MSGMNI		opt_sysvipc.h
155MSGSEG		opt_sysvipc.h
156MSGSSZ		opt_sysvipc.h
157MSGTQL		opt_sysvipc.h
158SEMMAP		opt_sysvipc.h
159SEMMNI		opt_sysvipc.h
160SEMMNS		opt_sysvipc.h
161SEMMNU		opt_sysvipc.h
162SEMMSL		opt_sysvipc.h
163SEMOPM		opt_sysvipc.h
164SEMUME		opt_sysvipc.h
165SHMALL		opt_sysvipc.h
166SHMMAX		opt_sysvipc.h
167SHMMAXPGS	opt_sysvipc.h
168SHMMIN		opt_sysvipc.h
169SHMMNI		opt_sysvipc.h
170SHMSEG		opt_sysvipc.h
171SYSVMSG		opt_sysvipc.h
172SYSVSEM		opt_sysvipc.h
173SYSVSHM		opt_sysvipc.h
174SW_WATCHDOG	opt_watchdog.h
175TURNSTILE_PROFILING
176VFS_AIO
177VERBOSE_SYSINIT	opt_global.h
178WLCACHE		opt_wavelan.h
179WLDEBUG		opt_wavelan.h
180
181# POSIX kernel options
182P1003_1B_MQUEUE			opt_posix.h
183P1003_1B_SEMAPHORES		opt_posix.h
184_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
185
186# Do we want the config file compiled into the kernel?
187INCLUDE_CONFIG_FILE	opt_config.h
188
189# Options for static filesystems.  These should only be used at config
190# time, since the corresponding lkms cannot work if there are any static
191# dependencies.  Unusability is enforced by hiding the defines for the
192# options in a never-included header.
193CD9660		opt_dontuse.h
194CODA		opt_dontuse.h
195EXT2FS		opt_dontuse.h
196FDESCFS		opt_dontuse.h
197HPFS		opt_dontuse.h
198MSDOSFS		opt_dontuse.h
199NTFS		opt_dontuse.h
200NULLFS		opt_dontuse.h
201NWFS		opt_dontuse.h
202PORTALFS	opt_dontuse.h
203PROCFS		opt_dontuse.h
204PSEUDOFS	opt_dontuse.h
205REISERFS	opt_dontuse.h
206SMBFS		opt_dontuse.h
207TMPFS		opt_dontuse.h
208UDF		opt_dontuse.h
209UNIONFS		opt_dontuse.h
210
211# Pseudofs debugging
212PSEUDOFS_TRACE	opt_pseudofs.h
213
214# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
215FFS		opt_ffs_broken_fixme.h
216
217# In-kernel GSS-API
218KGSSAPI		opt_kgssapi.h
219KGSSAPI_DEBUG	opt_kgssapi.h
220
221# These static filesystems have one slightly bogus static dependency in
222# sys/i386/i386/autoconf.c.  If any of these filesystems are
223# statically compiled into the kernel, code for mounting them as root
224# filesystems will be enabled - but look below.
225NFSCLIENT	opt_nfs.h
226NFSSERVER	opt_nfs.h
227NFS4CLIENT	opt_nfs.h
228
229# Use this option to compile both NFS client and server using the
230# legacy RPC implementation instead of the newer KRPC system (which
231# supports modern features such as RPCSEC_GSS
232NFS_LEGACYRPC	opt_nfs.h
233
234# filesystems and libiconv bridge
235CD9660_ICONV	opt_dontuse.h
236MSDOSFS_ICONV	opt_dontuse.h
237NTFS_ICONV	opt_dontuse.h
238UDF_ICONV	opt_dontuse.h
239
240# If you are following the conditions in the copyright,
241# you can enable soft-updates which will speed up a lot of thigs
242# and make the system safer from crashes at the same time.
243# otherwise a STUB module will be compiled in.
244SOFTUPDATES	opt_ffs.h
245
246# On small, embedded systems, it can be useful to turn off support for
247# snapshots.  It saves about 30-40k for a feature that would be lightly
248# used, if it is used at all.
249NO_FFS_SNAPSHOT	opt_ffs.h
250
251# Enabling this option turns on support for Access Control Lists in UFS,
252# which can be used to support high security configurations.  Depends on
253# UFS_EXTATTR.
254UFS_ACL		opt_ufs.h
255
256# Enabling this option turns on support for extended attributes in UFS-based
257# filesystems, which can be used to support high security configurations
258# as well as new filesystem features.
259UFS_EXTATTR	opt_ufs.h
260UFS_EXTATTR_AUTOSTART	opt_ufs.h
261
262# Enable fast hash lookups for large directories on UFS-based filesystems.
263UFS_DIRHASH	opt_ufs.h
264
265# Enable gjournal-based UFS journal.
266UFS_GJOURNAL	opt_ufs.h
267
268# The below sentence is not in English, and neither is this one.
269# We plan to remove the static dependences above, with a
270# <filesystem>_ROOT option to control if it usable as root.  This list
271# allows these options to be present in config files already (though
272# they won't make any difference yet).
273NFS_ROOT	opt_nfsroot.h
274
275# SMB/CIFS requester
276NETSMB		opt_netsmb.h
277
278# Options used only in subr_param.c.
279HZ		opt_param.h
280MAXFILES	opt_param.h
281NBUF		opt_param.h
282NSFBUFS		opt_param.h
283VM_BCACHE_SIZE_MAX	opt_param.h
284VM_SWZONE_SIZE_MAX	opt_param.h
285MAXUSERS
286DFLDSIZ		opt_param.h
287MAXDSIZ		opt_param.h
288MAXSSIZ		opt_param.h
289
290# Generic SCSI options.
291CAM_MAX_HIGHPOWER	opt_cam.h
292CAMDEBUG		opt_cam.h
293CAM_DEBUG_DELAY		opt_cam.h
294CAM_DEBUG_BUS		opt_cam.h
295CAM_DEBUG_TARGET	opt_cam.h
296CAM_DEBUG_LUN		opt_cam.h
297CAM_DEBUG_FLAGS		opt_cam.h
298SCSI_DELAY		opt_scsi.h
299SCSI_NO_SENSE_STRINGS	opt_scsi.h
300SCSI_NO_OP_STRINGS	opt_scsi.h
301
302# Options used only in cam/scsi/scsi_cd.c
303CHANGER_MIN_BUSY_SECONDS	opt_cd.h
304CHANGER_MAX_BUSY_SECONDS	opt_cd.h
305
306# Options used only in cam/scsi/scsi_sa.c.
307SA_IO_TIMEOUT		opt_sa.h
308SA_SPACE_TIMEOUT	opt_sa.h
309SA_REWIND_TIMEOUT	opt_sa.h
310SA_ERASE_TIMEOUT	opt_sa.h
311SA_1FM_AT_EOD		opt_sa.h
312
313# Options used only in cam/scsi/scsi_pt.c
314SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
315
316# Options used only in cam/scsi/scsi_ses.c
317SES_ENABLE_PASSTHROUGH	opt_ses.h
318
319# Options used in dev/sym/ (Symbios SCSI driver).
320SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
321					# Allows the ncr to take precedence
322					# 1 (1<<0) -> 810a, 860
323					# 2 (1<<1) -> 825a, 875, 885, 895
324					# 4 (1<<2) -> 895a, 896, 1510d 
325SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
326					# disabled:0 (default), enabled:1
327SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
328					# disabled:0, enabled:1 (default)
329SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
330					# default:8, range:[1..64]
331
332# Options used only in pci/ncr.c
333SCSI_NCR_DEBUG		opt_ncr.h
334SCSI_NCR_MAX_SYNC	opt_ncr.h
335SCSI_NCR_MAX_WIDE	opt_ncr.h
336SCSI_NCR_MYADDR		opt_ncr.h
337
338# Options used only in dev/isp/*
339ISP_TARGET_MODE		opt_isp.h
340ISP_FW_CRASH_DUMP	opt_isp.h
341ISP_DEFAULT_ROLES	opt_isp.h
342
343# Options used only in dev/iscsi
344ISCSI_INITIATOR_DEBUG	opt_iscsi_initiator.h
345
346# Options used in the 'ata' ATA/ATAPI driver
347ATA_STATIC_ID		opt_ata.h
348ATA_NOPCI		opt_ata.h
349
350# Net stuff.
351ACCEPT_FILTER_DATA
352ACCEPT_FILTER_DNS
353ACCEPT_FILTER_HTTP
354ALTQ			opt_global.h
355ALTQ_CBQ		opt_altq.h
356ALTQ_CDNR		opt_altq.h
357ALTQ_DEBUG		opt_altq.h
358ALTQ_HFSC		opt_altq.h
359ALTQ_NOPCC		opt_altq.h
360ALTQ_PRIQ		opt_altq.h
361ALTQ_RED		opt_altq.h
362ALTQ_RIO		opt_altq.h
363BOOTP			opt_bootp.h
364BOOTP_BLOCKSIZE		opt_bootp.h
365BOOTP_COMPAT		opt_bootp.h
366BOOTP_NFSROOT		opt_bootp.h
367BOOTP_NFSV3		opt_bootp.h
368BOOTP_WIRED_TO		opt_bootp.h
369DEVICE_POLLING
370DEV_ENC			opt_enc.h
371DEV_PF			opt_pf.h
372DEV_PFLOG		opt_pf.h
373DEV_PFSYNC		opt_pf.h
374DEV_VLAN		opt_vlan.h
375DUMMYNET		opt_ipdn.h
376ETHER_8022		opt_ef.h
377ETHER_8023		opt_ef.h
378ETHER_II		opt_ef.h
379ETHER_SNAP		opt_ef.h
380INET			opt_inet.h
381INET6			opt_inet6.h
382IPDIVERT
383IPFILTER		opt_ipfilter.h
384IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
385IPFILTER_LOG		opt_ipfilter.h
386IPFILTER_LOOKUP		opt_ipfilter.h
387IPFIREWALL		opt_ipfw.h
388IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
389IPFIREWALL_FORWARD	opt_ipfw.h
390IPFIREWALL_NAT		opt_ipfw.h
391IPFIREWALL_VERBOSE	opt_ipfw.h
392IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
393IPSEC			opt_ipsec.h
394IPSEC_DEBUG		opt_ipsec.h
395IP_NONLOCALBIND		opt_inet.h
396IPSEC_FILTERTUNNEL	opt_ipsec.h
397IPSTEALTH
398IPX
399KRPC
400LIBALIAS
401LIBMBPOOL
402LIBMCHAIN
403MBUF_PROFILING
404MBUF_STRESS_TEST
405MROUTING		opt_mrouting.h
406NCP
407NETATALK		opt_atalk.h
408NFSLOCKD
409PPP_BSDCOMP		opt_ppp.h
410PPP_DEFLATE		opt_ppp.h
411PPP_FILTER		opt_ppp.h
412RADIX_MPATH		opt_mpath.h
413ROUTETABLES		opt_route.h
414COMPAT_ROUTE_FLAGS	opt_route.h
415SLIP_IFF_OPTS		opt_slip.h
416TCPDEBUG
417TCP_OFFLOAD_DISABLE	opt_inet.h #Disable code to dispatch tcp offloading
418TCP_SIGNATURE		opt_inet.h
419VLAN_ARRAY		opt_vlan.h
420XBONEHACK
421
422#
423# SCTP
424#
425SCTP			opt_sctp.h
426SCTP_DEBUG		opt_sctp.h # Enable debug printfs
427SCTP_WITH_NO_CSUM       opt_sctp.h # Use this at your peril
428SCTP_LOCK_LOGGING       opt_sctp.h # Log to KTR lock activity
429SCTP_MBUF_LOGGING       opt_sctp.h # Log to KTR general mbuf aloc/free
430SCTP_MBCNT_LOGGING	opt_sctp.h # Log to KTR mbcnt activity
431SCTP_PACKET_LOGGING     opt_sctp.h # Log to a packet buffer last N packets
432SCTP_LTRACE_CHUNKS      opt_sctp.h # Log to KTR chunks processed
433SCTP_LTRACE_ERRORS      opt_sctp.h # Log to KTR error returns.
434#
435#
436#
437
438# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
439# Each netgraph node type can be either be compiled into the kernel
440# or loaded dynamically. To get the former, include the corresponding
441# option below. Each type has its own man page, e.g. ng_async(4).
442NETGRAPH
443NETGRAPH_DEBUG		opt_netgraph.h
444NETGRAPH_ASYNC		opt_netgraph.h
445NETGRAPH_ATMLLC		opt_netgraph.h
446NETGRAPH_ATM_ATMPIF	opt_netgraph.h
447NETGRAPH_BLUETOOTH	opt_netgraph.h
448NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
449NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
450NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
451NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
452NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
453NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
454NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
455NETGRAPH_BPF		opt_netgraph.h
456NETGRAPH_BRIDGE		opt_netgraph.h
457NETGRAPH_CAR		opt_netgraph.h
458NETGRAPH_CISCO		opt_netgraph.h
459NETGRAPH_DEFLATE	opt_netgraph.h
460NETGRAPH_DEVICE		opt_netgraph.h
461NETGRAPH_ECHO		opt_netgraph.h
462NETGRAPH_EIFACE		opt_netgraph.h
463NETGRAPH_ETHER		opt_netgraph.h
464NETGRAPH_ETHER_ECHO	opt_netgraph.h
465NETGRAPH_FEC		opt_netgraph.h
466NETGRAPH_FRAME_RELAY	opt_netgraph.h
467NETGRAPH_GIF		opt_netgraph.h
468NETGRAPH_GIF_DEMUX	opt_netgraph.h
469NETGRAPH_HOLE		opt_netgraph.h
470NETGRAPH_IFACE		opt_netgraph.h
471NETGRAPH_IP_INPUT	opt_netgraph.h
472NETGRAPH_IPFW		opt_netgraph.h
473NETGRAPH_KSOCKET	opt_netgraph.h
474NETGRAPH_L2TP		opt_netgraph.h
475NETGRAPH_LMI		opt_netgraph.h
476# MPPC compression requires proprietary files (not included)
477NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
478NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
479NETGRAPH_NAT		opt_netgraph.h
480NETGRAPH_NETFLOW	opt_netgraph.h
481NETGRAPH_ONE2MANY	opt_netgraph.h
482NETGRAPH_PPP		opt_netgraph.h
483NETGRAPH_PPPOE		opt_netgraph.h
484NETGRAPH_PPTPGRE	opt_netgraph.h
485NETGRAPH_PRED1		opt_netgraph.h
486NETGRAPH_RFC1490	opt_netgraph.h
487NETGRAPH_SOCKET		opt_netgraph.h
488NETGRAPH_SPLIT		opt_netgraph.h
489NETGRAPH_SPPP		opt_netgraph.h
490NETGRAPH_TAG		opt_netgraph.h
491NETGRAPH_TCPMSS		opt_netgraph.h
492NETGRAPH_TEE		opt_netgraph.h
493NETGRAPH_TTY		opt_netgraph.h
494NETGRAPH_UI		opt_netgraph.h
495NETGRAPH_VJC		opt_netgraph.h
496
497# NgATM options
498NGATM_ATM		opt_netgraph.h
499NGATM_ATMBASE		opt_netgraph.h
500NGATM_SSCOP		opt_netgraph.h
501NGATM_SSCFU		opt_netgraph.h
502NGATM_UNI		opt_netgraph.h
503NGATM_CCATM		opt_netgraph.h
504
505# DRM options
506DRM_DEBUG		opt_drm.h
507
508ZERO_COPY_SOCKETS	opt_zero.h
509TI_PRIVATE_JUMBOS	opt_ti.h
510TI_JUMBO_HDRSPLIT	opt_ti.h
511
512# XXX Conflict: # of devices vs network protocol (Native ATM).
513# This makes "atm.h" unusable.
514NATM
515
516# DPT driver debug flags
517DPT_MEASURE_PERFORMANCE	opt_dpt.h
518DPT_HANDLE_TIMEOUTS	opt_dpt.h
519DPT_TIMEOUT_FACTOR	opt_dpt.h
520DPT_LOST_IRQ		opt_dpt.h
521DPT_RESET_HBA		opt_dpt.h
522
523# Misc debug flags.  Most of these should probably be replaced with
524# 'DEBUG', and then let people recompile just the interesting modules
525# with 'make CC="cc -DDEBUG"'.
526CLUSTERDEBUG		opt_debug_cluster.h
527DEBUG_1284		opt_ppb_1284.h
528VP0_DEBUG		opt_vpo.h
529LPT_DEBUG		opt_lpt.h
530PLIP_DEBUG		opt_plip.h
531LOCKF_DEBUG		opt_debug_lockf.h
532NETATALKDEBUG		opt_atalk.h
533SI_DEBUG		opt_debug_si.h
534
535# Fb options
536FB_DEBUG		opt_fb.h
537FB_INSTALL_CDEV		opt_fb.h
538
539# ppbus related options
540PERIPH_1284		opt_ppb_1284.h
541DONTPROBE_1284		opt_ppb_1284.h
542
543# smbus related options
544ENABLE_ALART		opt_intpm.h
545
546# These cause changes all over the kernel
547BLKDEV_IOSIZE		opt_global.h
548BURN_BRIDGES		opt_global.h
549DEBUG			opt_global.h
550DEBUG_LOCKS		opt_global.h
551DEBUG_VFS_LOCKS		opt_global.h
552DFLTPHYS		opt_global.h
553DIAGNOSTIC		opt_global.h
554INVARIANT_SUPPORT	opt_global.h
555INVARIANTS		opt_global.h
556MAXPHYS			opt_global.h
557MCLSHIFT		opt_global.h
558MUTEX_DEBUG		opt_global.h
559MUTEX_NOINLINE		opt_global.h
560LOCK_PROFILING		opt_global.h
561LOCK_PROFILING_FAST	opt_global.h
562MSIZE			opt_global.h
563REGRESSION		opt_global.h
564RESTARTABLE_PANICS	opt_global.h
565RWLOCK_NOINLINE		opt_global.h
566SX_NOINLINE		opt_global.h
567VFS_BIO_DEBUG		opt_global.h
568
569# These are VM related options
570VM_KMEM_SIZE		opt_vm.h
571VM_KMEM_SIZE_SCALE	opt_vm.h
572VM_KMEM_SIZE_MAX	opt_vm.h
573VM_NRESERVLEVEL		opt_vm.h
574VM_LEVEL_0_ORDER	opt_vm.h
575NO_SWAPPING		opt_vm.h
576MALLOC_MAKE_FAILURES	opt_vm.h
577MALLOC_PROFILE		opt_vm.h
578
579# The MemGuard replacement allocator used for tamper-after-free detection
580DEBUG_MEMGUARD		opt_vm.h
581
582# The RedZone malloc(9) protection
583DEBUG_REDZONE		opt_vm.h
584
585# Standard SMP options
586SMP			opt_global.h
587
588# Size of the kernel message buffer
589MSGBUF_SIZE		opt_msgbuf.h
590
591# NFS options
592NFS_MINATTRTIMO		opt_nfs.h
593NFS_MAXATTRTIMO		opt_nfs.h
594NFS_MINDIRATTRTIMO	opt_nfs.h
595NFS_MAXDIRATTRTIMO	opt_nfs.h
596NFS_GATHERDELAY		opt_nfs.h
597NFS_WDELAYHASHSIZ	opt_nfs.h
598NFS_DEBUG		opt_nfs.h
599
600# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
601OVERRIDE_CARD			opt_bktr.h
602OVERRIDE_TUNER			opt_bktr.h
603OVERRIDE_DBX			opt_bktr.h
604OVERRIDE_MSP			opt_bktr.h
605BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
606BROOKTREE_ALLOC_PAGES		opt_bktr.h
607BKTR_OVERRIDE_CARD		opt_bktr.h
608BKTR_OVERRIDE_TUNER		opt_bktr.h
609BKTR_OVERRIDE_DBX		opt_bktr.h
610BKTR_OVERRIDE_MSP		opt_bktr.h
611BKTR_SYSTEM_DEFAULT		opt_bktr.h
612BKTR_ALLOC_PAGES		opt_bktr.h
613BKTR_USE_PLL			opt_bktr.h	
614BKTR_GPIO_ACCESS		opt_bktr.h
615BKTR_NO_MSP_RESET		opt_bktr.h
616BKTR_430_FX_MODE		opt_bktr.h
617BKTR_SIS_VIA_MODE		opt_bktr.h
618BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
619BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
620
621BREAK_TO_DEBUGGER	opt_comconsole.h
622ALT_BREAK_TO_DEBUGGER	opt_comconsole.h
623
624# Options to support PPS
625UART_PPS_ON_CTS		opt_uart.h
626
627# options for bus/device framework
628BUS_DEBUG		opt_bus.h
629
630# options for USB support
631USB_DEBUG		opt_usb.h
632USBVERBOSE		opt_usb.h
633USB_EHCI_BIG_ENDIAN_DESC	opt_usb.h
634U3G_DEBUG		opt_u3g.h
635UKBD_DFLT_KEYMAP	opt_ukbd.h
636UPLCOM_INTR_INTERVAL	opt_uplcom.h
637UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
638UVSCOM_INTR_INTERVAL	opt_uvscom.h
639
640# Embedded system options
641INIT_PATH
642
643ROOTDEVNAME
644
645FDC_DEBUG		opt_fdc.h
646PCFCLOCK_VERBOSE	opt_pcfclock.h
647PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
648
649KTR			opt_global.h
650KTR_ALQ			opt_ktr.h
651KTR_MASK		opt_ktr.h
652KTR_CPUMASK		opt_ktr.h
653KTR_COMPILE		opt_global.h
654KTR_ENTRIES		opt_global.h
655KTR_VERBOSE		opt_ktr.h
656WITNESS			opt_global.h
657WITNESS_KDB		opt_witness.h
658WITNESS_SKIPSPIN	opt_witness.h
659
660# options for ACPI support
661ACPI_DEBUG		opt_acpi.h
662ACPI_MAX_THREADS	opt_acpi.h
663ACPI_NO_SEMAPHORES	opt_acpi.h
664
665# ISA support
666DEV_ISA			opt_isa.h
667ISAPNP			opt_isa.h
668
669# various 'device presence' options.
670DEV_BPF			opt_bpf.h
671DEV_MCA			opt_mca.h
672DEV_CARP		opt_carp.h
673DEV_PTY			opt_tty.h
674DEV_SPLASH		opt_splash.h
675
676# EISA support
677DEV_EISA		opt_eisa.h
678EISA_SLOTS		opt_eisa.h
679
680# ed driver
681ED_HPP			opt_ed.h
682ED_3C503		opt_ed.h
683ED_SIC			opt_ed.h
684
685# bce driver
686BCE_DEBUG		opt_bce.h
687
688SOCKBUF_DEBUG		opt_global.h
689
690# options for ubsec driver
691UBSEC_DEBUG		opt_ubsec.h
692UBSEC_RNDTEST		opt_ubsec.h
693UBSEC_NO_RNG		opt_ubsec.h
694
695# options for hifn driver
696HIFN_DEBUG		opt_hifn.h
697HIFN_RNDTEST		opt_hifn.h
698
699# options for safenet driver
700SAFE_DEBUG		opt_safe.h
701SAFE_NO_RNG		opt_safe.h
702SAFE_RNDTEST		opt_safe.h
703
704# syscons options
705MAXCONS			opt_syscons.h
706SC_ALT_MOUSE_IMAGE	opt_syscons.h
707SC_CUT_SPACES2TABS	opt_syscons.h
708SC_CUT_SEPCHARS		opt_syscons.h
709SC_DEBUG_LEVEL		opt_syscons.h
710SC_DFLT_FONT		opt_syscons.h
711SC_DISABLE_KDBKEY	opt_syscons.h
712SC_DISABLE_REBOOT	opt_syscons.h
713SC_HISTORY_SIZE		opt_syscons.h
714SC_KERNEL_CONS_ATTR	opt_syscons.h
715SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
716SC_MOUSE_CHAR		opt_syscons.h
717SC_NO_CUTPASTE		opt_syscons.h
718SC_NO_FONT_LOADING	opt_syscons.h
719SC_NO_HISTORY		opt_syscons.h
720SC_NO_MODE_CHANGE	opt_syscons.h
721SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
722SC_NO_SYSMOUSE		opt_syscons.h
723SC_NORM_ATTR		opt_syscons.h
724SC_NORM_REV_ATTR	opt_syscons.h
725SC_PIXEL_MODE		opt_syscons.h
726SC_RENDER_DEBUG		opt_syscons.h
727SC_TWOBUTTON_MOUSE	opt_syscons.h
728
729# teken terminal emulator options
730TEKEN_UTF8		opt_teken.h
731TEKEN_XTERM		opt_teken.h
732
733# options for printf
734PRINTF_BUFR_SIZE	opt_printf.h
735
736# kbd options
737KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
738KBD_INSTALL_CDEV	opt_kbd.h
739KBD_MAXRETRY		opt_kbd.h
740KBD_MAXWAIT		opt_kbd.h
741KBD_RESETDELAY		opt_kbd.h
742KBDIO_DEBUG		opt_kbd.h
743
744# options for the Atheros driver
745ATH_DEBUG		opt_ath.h
746ATH_TXBUF		opt_ath.h
747ATH_RXBUF		opt_ath.h
748ATH_DIAGAPI		opt_ath.h
749ATH_TX99_DIAG		opt_ath.h
750ATH_SUPPORT_TDMA	opt_ath.h
751
752# options for the Atheros hal
753AH_SUPPORT_AR5416	opt_ah.h
754
755AH_DEBUG		opt_ah.h
756AH_ASSERT		opt_ah.h
757AH_DEBUG_ALQ		opt_ah.h
758AH_REGOPS_FUNC		opt_ah.h
759AH_WRITE_REGDOMAIN	opt_ah.h
760AH_DEBUG_COUNTRY	opt_ah.h
761AH_WRITE_EEPROM		opt_ah.h
762AH_PRIVATE_DIAG		opt_ah.h
763AH_NEED_DESC_SWAP	opt_ah.h
764AH_USE_INIPDGAIN	opt_ah.h
765AH_MAXCHAN		opt_ah.h
766
767# options for the Marvell 8335 wireless driver
768MALO_DEBUG		opt_malo.h
769MALO_TXBUF		opt_malo.h
770MALO_RXBUF		opt_malo.h
771
772# dcons options 
773DCONS_BUF_SIZE		opt_dcons.h
774DCONS_POLL_HZ		opt_dcons.h
775DCONS_FORCE_CONSOLE	opt_dcons.h
776DCONS_FORCE_GDB		opt_dcons.h
777
778# HWPMC options
779HWPMC_HOOKS
780
781# XBOX options for FreeBSD/i386, but some files are MI
782XBOX			opt_xbox.h
783
784# XFS
785XFS
786
787# Interrupt filtering
788INTR_FILTER
789
790# 802.11 support layer
791IEEE80211_DEBUG		opt_wlan.h
792IEEE80211_DEBUG_REFCNT	opt_wlan.h
793IEEE80211_AMPDU_AGE	opt_wlan.h
794IEEE80211_SUPPORT_TDMA	opt_wlan.h
795
796# 802.11 TDMA support
797TDMA_SLOTLEN_DEFAULT	opt_tdma.h
798TDMA_SLOTCNT_DEFAULT	opt_tdma.h
799TDMA_BINTVAL_DEFAULT	opt_tdma.h
800TDMA_TXRATE_11B_DEFAULT	opt_tdma.h
801TDMA_TXRATE_11G_DEFAULT	opt_tdma.h
802TDMA_TXRATE_11A_DEFAULT	opt_tdma.h
803
804# Virtualize the network stack
805VIMAGE			opt_global.h
806VIMAGE_GLOBALS		opt_global.h
807
808# Common Flash Interface (CFI) options
809CFI_SUPPORT_STRATAFLASH	opt_cfi.h
810CFI_ARMEDANDDANGEROUS	opt_cfi.h
811