options revision 165750
1# $FreeBSD: head/sys/conf/options 165750 2007-01-03 11:12:54Z piso $
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AHC_ALLOW_MEMIO		opt_aic7xxx.h
35AHC_TMODE_ENABLE	opt_aic7xxx.h
36AHC_DUMP_EEPROM		opt_aic7xxx.h
37AHC_DEBUG		opt_aic7xxx.h
38AHC_DEBUG_OPTS		opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT    opt_aic7xxx.h
40AHD_DEBUG		opt_aic79xx.h
41AHD_DEBUG_OPTS		opt_aic79xx.h
42AHD_TMODE_ENABLE	opt_aic79xx.h	
43AHD_REG_PRETTY_PRINT	opt_aic79xx.h
44ADW_ALLOW_MEMIO		opt_adw.h
45
46TWA_DEBUG		opt_twa.h
47TWA_FLASH_FIRMWARE	opt_twa.h
48
49# Debugging options.
50DDB
51DDB_NUMSYM	opt_ddb.h
52GDB
53KDB		opt_global.h
54KDB_TRACE	opt_kdb.h
55KDB_UNATTENDED	opt_kdb.h
56SYSCTL_DEBUG	opt_sysctl.h
57
58NO_SYSCTL_DESCR	opt_global.h
59
60# Miscellaneous options.
61ADAPTIVE_GIANT	opt_adaptive_mutexes.h
62NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
63ALQ
64AUDIT		opt_global.h
65CODA_COMPAT_5	opt_coda.h
66COMPAT_43	opt_compat.h
67COMPAT_43TTY	opt_compat.h
68COMPAT_FREEBSD4	opt_compat.h
69COMPAT_FREEBSD5	opt_compat.h
70COMPAT_FREEBSD6	opt_compat.h
71COMPILING_LINT	opt_global.h
72CY_PCI_FASTINTR
73DIRECTIO
74FULL_PREEMPTION	opt_sched.h
75IPI_PREEMPTION	opt_sched.h
76GEOM_AES	opt_geom.h
77GEOM_APPLE	opt_geom.h
78GEOM_BDE	opt_geom.h
79GEOM_BSD	opt_geom.h
80GEOM_CACHE	opt_geom.h
81GEOM_CONCAT	opt_geom.h
82GEOM_ELI	opt_geom.h
83GEOM_FOX	opt_geom.h
84GEOM_GATE	opt_geom.h
85GEOM_GPT	opt_geom.h
86GEOM_JOURNAL	opt_geom.h
87GEOM_LABEL	opt_geom.h
88GEOM_MBR	opt_geom.h
89GEOM_MIRROR	opt_geom.h
90GEOM_NOP	opt_geom.h
91GEOM_PC98	opt_geom.h
92GEOM_RAID3	opt_geom.h
93GEOM_SHSEC	opt_geom.h
94GEOM_STRIPE	opt_geom.h
95GEOM_SUNLABEL	opt_geom.h
96GEOM_UZIP	opt_geom.h
97GEOM_VOL	opt_geom.h
98GEOM_ZERO	opt_geom.h
99KSE		opt_global.h
100KSTACK_MAX_PAGES
101KSTACK_PAGES
102KTRACE
103KTRACE_REQUEST_POOL	opt_ktrace.h
104LIBICONV
105MAC
106MAC_ALWAYS_LABEL_MBUF	opt_mac.h
107MAC_BIBA	opt_dontuse.h
108MAC_BSDEXTENDED	opt_dontuse.h
109MAC_IFOFF	opt_dontuse.h
110MAC_LOMAC	opt_dontuse.h
111MAC_MLS		opt_dontuse.h
112MAC_NONE	opt_dontuse.h
113MAC_PARTITION	opt_dontuse.h
114MAC_PORTACL	opt_dontuse.h
115MAC_SEEOTHERUIDS	opt_dontuse.h
116MAC_STATIC	opt_mac.h
117MAC_STUB	opt_dontuse.h
118MAC_TEST	opt_dontuse.h
119MD_ROOT		opt_md.h
120MD_ROOT_SIZE	opt_md.h
121MFI_DEBUG	opt_mfi.h
122MFI_DECODE_LOG	opt_mfi.h
123MPROF_BUFFERS	opt_mprof.h
124MPROF_HASH_SIZE	opt_mprof.h
125MUTEX_WAKE_ALL
126NSWBUF_MIN	opt_swap.h
127PANIC_REBOOT_WAIT_TIME	opt_panic.h
128PPC_DEBUG	opt_ppc.h
129PPC_PROBE_CHIPSET opt_ppc.h
130PPS_SYNC	opt_ntp.h
131PREEMPTION	opt_sched.h
132QUOTA
133SCHED_4BSD	opt_sched.h
134SCHED_CORE	opt_sched.h
135SCHED_ULE	opt_sched.h
136SHOW_BUSYBUFS
137SLEEPQUEUE_PROFILING
138SLHCI_DEBUG	opt_slhci.h
139SPX_HACK
140SUIDDIR
141MSGMNB		opt_sysvipc.h
142MSGMNI		opt_sysvipc.h
143MSGSEG		opt_sysvipc.h
144MSGSSZ		opt_sysvipc.h
145MSGTQL		opt_sysvipc.h
146SEMMAP		opt_sysvipc.h
147SEMMNI		opt_sysvipc.h
148SEMMNS		opt_sysvipc.h
149SEMMNU		opt_sysvipc.h
150SEMMSL		opt_sysvipc.h
151SEMOPM		opt_sysvipc.h
152SEMUME		opt_sysvipc.h
153SHMALL		opt_sysvipc.h
154SHMMAX		opt_sysvipc.h
155SHMMAXPGS	opt_sysvipc.h
156SHMMIN		opt_sysvipc.h
157SHMMNI		opt_sysvipc.h
158SHMSEG		opt_sysvipc.h
159SYSVMSG		opt_sysvipc.h
160SYSVSEM		opt_sysvipc.h
161SYSVSHM		opt_sysvipc.h
162SW_WATCHDOG	opt_watchdog.h
163TURNSTILE_PROFILING
164TTYHOG		opt_tty.h
165VFS_AIO
166VERBOSE_SYSINIT	opt_global.h
167WLCACHE		opt_wavelan.h
168WLDEBUG		opt_wavelan.h
169
170# POSIX kernel options
171P1003_1B_MQUEUE			opt_posix.h
172P1003_1B_SEMAPHORES		opt_posix.h
173_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
174
175# Do we want the config file compiled into the kernel?
176INCLUDE_CONFIG_FILE	opt_config.h
177
178# Options for static filesystems.  These should only be used at config
179# time, since the corresponding lkms cannot work if there are any static
180# dependencies.  Unusability is enforced by hiding the defines for the
181# options in a never-included header.
182CD9660		opt_dontuse.h
183CODA		opt_dontuse.h
184EXT2FS		opt_dontuse.h
185FDESCFS		opt_dontuse.h
186HPFS		opt_dontuse.h
187MSDOSFS		opt_dontuse.h
188NTFS		opt_dontuse.h
189NULLFS		opt_dontuse.h
190NWFS		opt_dontuse.h
191PORTALFS	opt_dontuse.h
192PROCFS		opt_dontuse.h
193PSEUDOFS	opt_dontuse.h
194REISERFS	opt_dontuse.h
195SMBFS		opt_dontuse.h
196UDF		opt_dontuse.h
197UMAPFS		opt_dontuse.h
198UNIONFS		opt_dontuse.h
199
200# Pseudofs debugging
201PSEUDOFS_TRACE	opt_pseudofs.h
202
203# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
204FFS		opt_ffs_broken_fixme.h
205
206# These static filesystems have one slightly bogus static dependency in
207# sys/i386/i386/autoconf.c.  If any of these filesystems are
208# statically compiled into the kernel, code for mounting them as root
209# filesystems will be enabled - but look below.
210NFSCLIENT	opt_nfs.h
211NFSSERVER	opt_nfs.h
212NFS4CLIENT	opt_nfs.h
213
214# filesystems and libiconv bridge
215CD9660_ICONV	opt_dontuse.h
216MSDOSFS_ICONV	opt_dontuse.h
217NTFS_ICONV	opt_dontuse.h
218UDF_ICONV	opt_dontuse.h
219
220# If you are following the conditions in the copyright,
221# you can enable soft-updates which will speed up a lot of thigs
222# and make the system safer from crashes at the same time.
223# otherwise a STUB module will be compiled in.
224SOFTUPDATES	opt_ffs.h
225
226# On small, embedded systems, it can be useful to turn off support for
227# snapshots.  It saves about 30-40k for a feature that would be lightly
228# used, if it is used at all.
229NO_FFS_SNAPSHOT	opt_ffs.h
230
231# Enabling this option turns on support for Access Control Lists in UFS,
232# which can be used to support high security configurations.  Depends on
233# UFS_EXTATTR.
234UFS_ACL		opt_ufs.h
235
236# Enabling this option turns on support for extended attributes in UFS-based
237# filesystems, which can be used to support high security configurations
238# as well as new filesystem features.
239UFS_EXTATTR	opt_ufs.h
240UFS_EXTATTR_AUTOSTART	opt_ufs.h
241
242# Enable fast hash lookups for large directories on UFS-based filesystems.
243UFS_DIRHASH	opt_ufs.h
244
245# Enable gjournal-based UFS journal.
246UFS_GJOURNAL	opt_ufs.h
247
248# The below sentence is not in English, and neither is this one.
249# We plan to remove the static dependences above, with a
250# <filesystem>_ROOT option to control if it usable as root.  This list
251# allows these options to be present in config files already (though
252# they won't make any difference yet).
253NFS_ROOT	opt_nfsroot.h
254
255# SMB/CIFS requester
256NETSMB		opt_netsmb.h
257
258# Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"!
259MSDOSFS_LARGE	opt_msdosfs.h
260
261# Options used only in subr_param.c.
262HZ		opt_param.h
263MAXFILES	opt_param.h
264NBUF		opt_param.h
265NSFBUFS		opt_param.h
266VM_BCACHE_SIZE_MAX	opt_param.h
267VM_SWZONE_SIZE_MAX	opt_param.h
268MAXUSERS
269DFLDSIZ		opt_param.h
270MAXDSIZ		opt_param.h
271MAXSSIZ		opt_param.h
272
273# Generic SCSI options.
274CAM_MAX_HIGHPOWER	opt_cam.h
275CAMDEBUG		opt_cam.h
276CAM_DEBUG_DELAY		opt_cam.h
277CAM_DEBUG_BUS		opt_cam.h
278CAM_DEBUG_TARGET	opt_cam.h
279CAM_DEBUG_LUN		opt_cam.h
280CAM_DEBUG_FLAGS		opt_cam.h
281SCSI_DELAY		opt_scsi.h
282SCSI_NO_SENSE_STRINGS	opt_scsi.h
283SCSI_NO_OP_STRINGS	opt_scsi.h
284
285# Options used only in cam/scsi/scsi_cd.c
286CHANGER_MIN_BUSY_SECONDS	opt_cd.h
287CHANGER_MAX_BUSY_SECONDS	opt_cd.h
288
289# Options used only in cam/scsi/scsi_sa.c.
290SA_IO_TIMEOUT		opt_sa.h
291SA_SPACE_TIMEOUT	opt_sa.h
292SA_REWIND_TIMEOUT	opt_sa.h
293SA_ERASE_TIMEOUT	opt_sa.h
294SA_1FM_AT_EOD		opt_sa.h
295
296# Options used only in cam/scsi/scsi_pt.c
297SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
298
299# Options used only in cam/scsi/scsi_ses.c
300SES_ENABLE_PASSTHROUGH	opt_ses.h
301
302# Options used in dev/sym/ (Symbios SCSI driver).
303SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
304					# Allows the ncr to take precedence
305					# 1 (1<<0) -> 810a, 860
306					# 2 (1<<1) -> 825a, 875, 885, 895
307					# 4 (1<<2) -> 895a, 896, 1510d 
308SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
309					# disabled:0 (default), enabled:1
310SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
311					# disabled:0, enabled:1 (default)
312SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
313					# default:8, range:[1..64]
314
315# Options used only in pci/ncr.c
316SCSI_NCR_DEBUG		opt_ncr.h
317SCSI_NCR_MAX_SYNC	opt_ncr.h
318SCSI_NCR_MAX_WIDE	opt_ncr.h
319SCSI_NCR_MYADDR		opt_ncr.h
320
321# Options used only in dev/isp/*
322ISP_TARGET_MODE		opt_isp.h
323ISP_FW_CRASH_DUMP	opt_isp.h
324ISP_DEFAULT_ROLES	opt_isp.h
325
326# Options used in the 'ata' ATA/ATAPI driver
327ATA_STATIC_ID		opt_ata.h
328ATA_NOPCI		opt_ata.h
329
330# Net stuff.
331ACCEPT_FILTER_DATA
332ACCEPT_FILTER_HTTP
333ALTQ			opt_global.h
334ALTQ_CBQ		opt_altq.h
335ALTQ_RED		opt_altq.h
336ALTQ_RIO		opt_altq.h
337ALTQ_HFSC		opt_altq.h
338ALTQ_CDNR		opt_altq.h
339ALTQ_PRIQ		opt_altq.h
340ALTQ_NOPCC		opt_altq.h
341ALTQ_DEBUG		opt_altq.h
342BOOTP			opt_bootp.h
343BOOTP_COMPAT		opt_bootp.h
344BOOTP_NFSROOT		opt_bootp.h
345BOOTP_NFSV3		opt_bootp.h
346BOOTP_WIRED_TO		opt_bootp.h
347DEVICE_POLLING
348DEV_ENC			opt_enc.h
349DEV_PF			opt_pf.h
350DEV_PFLOG		opt_pf.h
351DEV_PFSYNC		opt_pf.h
352PF_MPSAFE_UGID		opt_pf.h
353ETHER_II		opt_ef.h
354ETHER_8023		opt_ef.h
355ETHER_8022		opt_ef.h
356ETHER_SNAP		opt_ef.h
357MROUTING		opt_mrouting.h
358PIM			opt_mrouting.h
359INET			opt_inet.h
360INET6			opt_inet6.h
361IPSEC			opt_ipsec.h
362IPSEC_ESP		opt_ipsec.h
363IPSEC_DEBUG		opt_ipsec.h
364IPSEC_FILTERGIF		opt_ipsec.h
365FAST_IPSEC		opt_ipsec.h
366IPDIVERT
367DUMMYNET		opt_ipdn.h
368IPFILTER		opt_ipfilter.h
369IPFILTER_LOG		opt_ipfilter.h
370IPFILTER_LOOKUP		opt_ipfilter.h
371IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
372IPFIREWALL		opt_ipfw.h
373IPFIREWALL_VERBOSE	opt_ipfw.h
374IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
375IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
376IPFIREWALL_FORWARD	opt_ipfw.h
377IPFIREWALL_NAT		opt_ipfw.h
378IPSTEALTH
379IPX
380IPXIP			opt_ipx.h
381LIBMBPOOL
382LIBMCHAIN
383LIBALIAS
384MBUF_STRESS_TEST
385NCP
386NETATALK		opt_atalk.h
387NET_WITH_GIANT		opt_net.h
388PPP_BSDCOMP		opt_ppp.h
389PPP_DEFLATE		opt_ppp.h
390PPP_FILTER		opt_ppp.h
391SLIP_IFF_OPTS		opt_slip.h
392TCPDEBUG
393TCP_SIGNATURE		opt_inet.h
394TCP_SACK_DEBUG		opt_tcp_sack.h 
395TCP_DROP_SYNFIN		opt_tcp_input.h
396DEV_VLAN		opt_vlan.h
397VLAN_ARRAY		opt_vlan.h
398XBONEHACK
399
400#
401# SCTP
402#
403SCTP			opt_sctp.h
404SCTP_DEBUG		opt_sctp.h
405SCTP_HIGH_SPEED		opt_sctp.h
406SCTP_LOG_MAXBURST       opt_sctp.h
407SCTP_LOG_RWND           opt_sctp.h	
408SCTP_STAT_LOGGING	opt_sctp.h
409SCTP_CWND_LOGGING	opt_sctp.h
410SCTP_CWND_MONITOR	opt_sctp.h
411SCTP_BLK_LOGGING	opt_sctp.h
412SCTP_STR_LOGGING	opt_sctp.h
413SCTP_FR_LOGGING		opt_sctp.h
414SCTP_MAP_LOGGING	opt_sctp.h
415SCTP_SACK_LOGGING	opt_sctp.h
416SCTP_LOCK_LOGGING       opt_sctp.h
417SCTP_RTTVAR_LOGGING     opt_sctp.h
418SCTP_SB_LOGGING         opt_sctp.h
419SCTP_WITH_NO_CSUM       opt_sctp.h
420SCTP_EARLYFR_LOGGING    opt_sctp.h
421SCTP_NAGLE_LOGGING      opt_sctp.h
422SCTP_WAKE_LOGGING       opt_sctp.h
423SCTP_RECV_RWND_LOGGING  opt_sctp.h
424SCTP_SACK_RWND_LOGGING  opt_sctp.h
425SCTP_MBUF_LOGGING       opt_sctp.h
426
427# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
428# Each netgraph node type can be either be compiled into the kernel
429# or loaded dynamically. To get the former, include the corresponding
430# option below. Each type has its own man page, e.g. ng_async(4).
431NETGRAPH
432NETGRAPH_DEBUG		opt_netgraph.h
433NETGRAPH_ASYNC		opt_netgraph.h
434NETGRAPH_ATMLLC		opt_netgraph.h
435NETGRAPH_ATM_ATMPIF	opt_netgraph.h
436NETGRAPH_BLUETOOTH	opt_netgraph.h
437NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
438NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
439NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
440NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
441NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
442NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
443NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
444NETGRAPH_BPF		opt_netgraph.h
445NETGRAPH_BRIDGE		opt_netgraph.h
446NETGRAPH_CISCO		opt_netgraph.h
447NETGRAPH_DEFLATE	opt_netgraph.h
448NETGRAPH_DEVICE		opt_netgraph.h
449NETGRAPH_ECHO		opt_netgraph.h
450NETGRAPH_EIFACE		opt_netgraph.h
451NETGRAPH_ETHER		opt_netgraph.h
452NETGRAPH_FEC		opt_netgraph.h
453NETGRAPH_FRAME_RELAY	opt_netgraph.h
454NETGRAPH_GIF		opt_netgraph.h
455NETGRAPH_GIF_DEMUX	opt_netgraph.h
456NETGRAPH_HOLE		opt_netgraph.h
457NETGRAPH_IFACE		opt_netgraph.h
458NETGRAPH_IP_INPUT	opt_netgraph.h
459NETGRAPH_IPFW		opt_netgraph.h
460NETGRAPH_KSOCKET	opt_netgraph.h
461NETGRAPH_L2TP		opt_netgraph.h
462NETGRAPH_LMI		opt_netgraph.h
463# MPPC compression requires proprietary files (not included)
464NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
465NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
466NETGRAPH_NAT		opt_netgraph.h
467NETGRAPH_NETFLOW	opt_netgraph.h
468NETGRAPH_ONE2MANY	opt_netgraph.h
469NETGRAPH_PPP		opt_netgraph.h
470NETGRAPH_PPPOE		opt_netgraph.h
471NETGRAPH_PPTPGRE	opt_netgraph.h
472NETGRAPH_PRED1		opt_netgraph.h
473NETGRAPH_RFC1490	opt_netgraph.h
474NETGRAPH_SOCKET		opt_netgraph.h
475NETGRAPH_SPLIT		opt_netgraph.h
476NETGRAPH_SPPP		opt_netgraph.h
477NETGRAPH_TAG		opt_netgraph.h
478NETGRAPH_TCPMSS		opt_netgraph.h
479NETGRAPH_TEE		opt_netgraph.h
480NETGRAPH_TTY		opt_netgraph.h
481NETGRAPH_UI		opt_netgraph.h
482NETGRAPH_VJC		opt_netgraph.h
483
484# NgATM options
485NGATM_ATM		opt_netgraph.h
486NGATM_ATMBASE		opt_netgraph.h
487NGATM_SSCOP		opt_netgraph.h
488NGATM_SSCFU		opt_netgraph.h
489NGATM_UNI		opt_netgraph.h
490NGATM_CCATM		opt_netgraph.h
491
492# DRM options
493DRM_DEBUG		opt_drm.h
494
495ZERO_COPY_SOCKETS	opt_zero.h
496TI_PRIVATE_JUMBOS	opt_ti.h
497TI_JUMBO_HDRSPLIT	opt_ti.h
498
499# ATM (HARP version)
500ATM_CORE		opt_atm.h
501ATM_IP			opt_atm.h
502ATM_SIGPVC		opt_atm.h
503ATM_SPANS		opt_atm.h
504ATM_UNI			opt_atm.h
505
506# XXX Conflict: # of devices vs network protocol (Native ATM).
507# This makes "atm.h" unusable.
508NATM
509
510# DPT driver debug flags
511DPT_MEASURE_PERFORMANCE	opt_dpt.h
512DPT_HANDLE_TIMEOUTS	opt_dpt.h
513DPT_TIMEOUT_FACTOR	opt_dpt.h
514DPT_LOST_IRQ		opt_dpt.h
515DPT_RESET_HBA		opt_dpt.h
516
517# Misc debug flags.  Most of these should probably be replaced with
518# 'DEBUG', and then let people recompile just the interesting modules
519# with 'make CC="cc -DDEBUG"'.
520CLUSTERDEBUG		opt_debug_cluster.h
521DEBUG_1284		opt_ppb_1284.h
522VP0_DEBUG		opt_vpo.h
523LPT_DEBUG		opt_lpt.h
524PLIP_DEBUG		opt_plip.h
525LOCKF_DEBUG		opt_debug_lockf.h
526NETATALKDEBUG		opt_atalk.h
527SI_DEBUG		opt_debug_si.h
528
529# Fb options
530FB_DEBUG		opt_fb.h
531FB_INSTALL_CDEV		opt_fb.h
532
533# ppbus related options
534PERIPH_1284		opt_ppb_1284.h
535DONTPROBE_1284		opt_ppb_1284.h
536
537# smbus related options
538ENABLE_ALART		opt_intpm.h
539
540# These cause changes all over the kernel
541BLKDEV_IOSIZE		opt_global.h
542MAXPHYS 		opt_global.h
543DFLTPHYS		opt_global.h
544BURN_BRIDGES		opt_global.h
545DEBUG			opt_global.h
546DEBUG_LOCKS		opt_global.h
547DEBUG_VFS_LOCKS		opt_global.h
548DIAGNOSTIC		opt_global.h
549INVARIANT_SUPPORT	opt_global.h
550INVARIANTS		opt_global.h
551MCLSHIFT		opt_global.h
552MUTEX_DEBUG		opt_global.h
553MUTEX_NOINLINE		opt_global.h
554LOCK_PROFILING		opt_global.h
555MSIZE			opt_global.h
556REGRESSION		opt_global.h
557RESTARTABLE_PANICS	opt_global.h
558RWLOCK_NOINLINE		opt_global.h
559VFS_BIO_DEBUG		opt_global.h
560
561# These are VM related options
562VM_KMEM_SIZE		opt_vm.h
563VM_KMEM_SIZE_SCALE	opt_vm.h
564VM_KMEM_SIZE_MAX	opt_vm.h
565NO_SWAPPING		opt_vm.h
566MALLOC_MAKE_FAILURES	opt_vm.h
567MALLOC_PROFILE		opt_vm.h
568PQ_NOOPT		opt_vmpage.h
569
570# The MemGuard replacement allocator used for tamper-after-free detection
571DEBUG_MEMGUARD		opt_vm.h
572
573# The RedZone malloc(9) protection
574DEBUG_REDZONE		opt_vm.h
575
576# Standard SMP options
577SMP			opt_global.h
578
579# Size of the kernel message buffer
580MSGBUF_SIZE		opt_msgbuf.h
581
582# NFS options
583NFS_MINATTRTIMO		opt_nfs.h
584NFS_MAXATTRTIMO		opt_nfs.h
585NFS_MINDIRATTRTIMO	opt_nfs.h
586NFS_MAXDIRATTRTIMO	opt_nfs.h
587NFS_GATHERDELAY		opt_nfs.h
588NFS_WDELAYHASHSIZ	opt_nfs.h
589NFS_DEBUG		opt_nfs.h
590
591# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
592OVERRIDE_CARD			opt_bktr.h
593OVERRIDE_TUNER			opt_bktr.h
594OVERRIDE_DBX			opt_bktr.h
595OVERRIDE_MSP			opt_bktr.h
596BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
597BROOKTREE_ALLOC_PAGES		opt_bktr.h
598BKTR_OVERRIDE_CARD		opt_bktr.h
599BKTR_OVERRIDE_TUNER		opt_bktr.h
600BKTR_OVERRIDE_DBX		opt_bktr.h
601BKTR_OVERRIDE_MSP		opt_bktr.h
602BKTR_SYSTEM_DEFAULT		opt_bktr.h
603BKTR_ALLOC_PAGES		opt_bktr.h
604BKTR_USE_PLL			opt_bktr.h	
605BKTR_GPIO_ACCESS		opt_bktr.h
606BKTR_NO_MSP_RESET		opt_bktr.h
607BKTR_430_FX_MODE		opt_bktr.h
608BKTR_SIS_VIA_MODE		opt_bktr.h
609BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
610BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
611
612BREAK_TO_DEBUGGER	opt_comconsole.h
613ALT_BREAK_TO_DEBUGGER	opt_comconsole.h
614
615# Options to support PPS
616UART_PPS_ON_CTS		opt_uart.h
617
618# options for bus/device framework
619BUS_DEBUG		opt_bus.h
620
621# options for USB support
622USB_DEBUG		opt_usb.h
623USBVERBOSE		opt_usb.h
624UKBD_DFLT_KEYMAP	opt_ukbd.h
625UPLCOM_INTR_INTERVAL	opt_uplcom.h
626UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
627UVSCOM_INTR_INTERVAL	opt_uvscom.h
628
629# Embedded system options
630INIT_PATH
631
632ROOTDEVNAME
633
634FDC_DEBUG		opt_fdc.h
635PCFCLOCK_VERBOSE	opt_pcfclock.h
636PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
637
638KTR			opt_global.h
639KTR_ALQ			opt_ktr.h
640KTR_MASK		opt_ktr.h
641KTR_CPUMASK		opt_ktr.h
642KTR_COMPILE		opt_global.h
643KTR_ENTRIES		opt_global.h
644KTR_VERBOSE		opt_ktr.h
645WITNESS			opt_global.h
646WITNESS_KDB		opt_witness.h
647WITNESS_SKIPSPIN	opt_witness.h
648
649# options for ACPI support
650ACPI_DEBUG		opt_acpi.h
651ACPI_MAX_THREADS	opt_acpi.h
652ACPI_NO_SEMAPHORES	opt_acpi.h
653ACPICA_PEDANTIC		opt_acpi.h
654
655# ISA support
656DEV_ISA			opt_isa.h
657ISAPNP			opt_isa.h
658
659# various 'device presence' options.
660DEV_BPF			opt_bpf.h
661DEV_MCA			opt_mca.h
662DEV_CARP		opt_carp.h
663DEV_SPLASH		opt_splash.h
664
665EISA_SLOTS		opt_eisa.h
666
667# ed driver
668ED_HPP			opt_ed.h
669ED_3C503		opt_ed.h
670ED_SIC			opt_ed.h
671
672# bce driver
673BCE_DEBUG		opt_bce.h
674
675# wi driver
676WI_SYMBOL_FIRMWARE	opt_wi.h
677
678SOCKBUF_DEBUG		opt_global.h
679
680# options for ubsec driver
681UBSEC_DEBUG		opt_ubsec.h
682UBSEC_RNDTEST		opt_ubsec.h
683UBSEC_NO_RNG		opt_ubsec.h
684
685# options for hifn driver
686HIFN_DEBUG		opt_hifn.h
687HIFN_RNDTEST		opt_hifn.h
688
689# options for safenet driver
690SAFE_DEBUG		opt_safe.h
691SAFE_NO_RNG		opt_safe.h
692SAFE_RNDTEST		opt_safe.h
693
694# syscons options
695MAXCONS			opt_syscons.h
696SC_ALT_MOUSE_IMAGE	opt_syscons.h
697SC_CUT_SPACES2TABS	opt_syscons.h
698SC_CUT_SEPCHARS		opt_syscons.h
699SC_DEBUG_LEVEL		opt_syscons.h
700SC_DFLT_FONT		opt_syscons.h
701SC_DISABLE_KDBKEY	opt_syscons.h
702SC_DISABLE_REBOOT	opt_syscons.h
703SC_HISTORY_SIZE		opt_syscons.h
704SC_KERNEL_CONS_ATTR	opt_syscons.h
705SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
706SC_MOUSE_CHAR		opt_syscons.h
707SC_NO_CUTPASTE		opt_syscons.h
708SC_NO_FONT_LOADING	opt_syscons.h
709SC_NO_HISTORY		opt_syscons.h
710SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
711SC_NO_SYSMOUSE		opt_syscons.h
712SC_NORM_ATTR		opt_syscons.h
713SC_NORM_REV_ATTR	opt_syscons.h
714SC_PIXEL_MODE		opt_syscons.h
715SC_RENDER_DEBUG		opt_syscons.h
716SC_TWOBUTTON_MOUSE	opt_syscons.h
717
718# options for printf
719PRINTF_BUFR_SIZE	opt_printf.h
720
721# kbd options
722KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
723KBD_INSTALL_CDEV	opt_kbd.h
724KBD_MAXRETRY		opt_kbd.h
725KBD_MAXWAIT		opt_kbd.h
726KBD_RESETDELAY		opt_kbd.h
727KBDIO_DEBUG		opt_kbd.h
728
729# options for the Atheros driver
730ATH_DEBUG		opt_ath.h
731ATH_TXBUF		opt_ath.h
732ATH_RXBUF		opt_ath.h
733ATH_DIAGAPI		opt_ath.h
734ATH_TX99_DIAG		opt_ath.h
735
736# dcons options 
737DCONS_BUF_SIZE		opt_dcons.h
738DCONS_POLL_HZ		opt_dcons.h
739DCONS_FORCE_CONSOLE	opt_dcons.h
740DCONS_FORCE_GDB		opt_dcons.h
741
742# Static unit counts
743NI4BTRC			opt_i4b.h
744NI4BRBCH		opt_i4b.h
745NI4BTEL			opt_i4b.h
746NI4BIPR			opt_i4b.h
747NI4BING			opt_i4b.h
748NI4BISPPP		opt_i4b.h
749
750# VFS options
751LOOKUP_SHARED		opt_vfs.h
752
753# HWPMC options
754HWPMC_HOOKS
755
756# XBOX options for FreeBSD/i386, but some files are MI
757XBOX			opt_xbox.h
758
759# XFS
760XFS
761
762# snd_emu10kx sound driver options
763SND_EMU10KX_MULTICHANNEL	opt_emu10kx.h
764