options revision 159927
1# $FreeBSD: head/sys/conf/options 159927 2006-06-25 18:37:44Z babkin $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affect only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AHC_ALLOW_MEMIO opt_aic7xxx.h 35AHC_TMODE_ENABLE opt_aic7xxx.h 36AHC_DUMP_EEPROM opt_aic7xxx.h 37AHC_DEBUG opt_aic7xxx.h 38AHC_DEBUG_OPTS opt_aic7xxx.h 39AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40AHD_DEBUG opt_aic79xx.h 41AHD_DEBUG_OPTS opt_aic79xx.h 42AHD_TMODE_ENABLE opt_aic79xx.h 43AHD_REG_PRETTY_PRINT opt_aic79xx.h 44ADW_ALLOW_MEMIO opt_adw.h 45 46TWA_DEBUG opt_twa.h 47TWA_FLASH_FIRMWARE opt_twa.h 48 49# Debugging options. 50DDB 51DDB_NUMSYM opt_ddb.h 52GDB 53GDBSPEED opt_gdb.h 54KDB opt_global.h 55KDB_TRACE opt_kdb.h 56KDB_UNATTENDED opt_kdb.h 57SYSCTL_DEBUG opt_sysctl.h 58 59# Miscellaneous options. 60ADAPTIVE_GIANT opt_adaptive_mutexes.h 61NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 62ALQ 63AUDIT opt_global.h 64CODA_COMPAT_5 opt_coda.h 65COMPAT_43 opt_compat.h 66COMPAT_43TTY opt_compat.h 67COMPAT_FREEBSD4 opt_compat.h 68COMPAT_FREEBSD5 opt_compat.h 69COMPILING_LINT opt_global.h 70CONSPEED opt_comconsole.h 71CY_PCI_FASTINTR 72DIRECTIO 73FULL_PREEMPTION opt_sched.h 74IPI_PREEMPTION opt_sched.h 75GEOM_AES opt_geom.h 76GEOM_APPLE opt_geom.h 77GEOM_BDE opt_geom.h 78GEOM_BSD opt_geom.h 79GEOM_CONCAT opt_geom.h 80GEOM_ELI opt_geom.h 81GEOM_FOX opt_geom.h 82GEOM_GATE opt_geom.h 83GEOM_GPT opt_geom.h 84GEOM_LABEL opt_geom.h 85GEOM_MBR opt_geom.h 86GEOM_MIRROR opt_geom.h 87GEOM_NOP opt_geom.h 88GEOM_PC98 opt_geom.h 89GEOM_RAID3 opt_geom.h 90GEOM_SHSEC opt_geom.h 91GEOM_STRIPE opt_geom.h 92GEOM_SUNLABEL opt_geom.h 93GEOM_UZIP opt_geom.h 94GEOM_VOL opt_geom.h 95GEOM_ZERO opt_geom.h 96KSTACK_MAX_PAGES 97KSTACK_PAGES 98KTRACE 99KTRACE_REQUEST_POOL opt_ktrace.h 100LIBICONV 101MAC 102MAC_ALWAYS_LABEL_MBUF opt_mac.h 103MAC_BIBA opt_dontuse.h 104MAC_BSDEXTENDED opt_dontuse.h 105MAC_DEBUG opt_mac.h 106MAC_IFOFF opt_dontuse.h 107MAC_LOMAC opt_dontuse.h 108MAC_MLS opt_dontuse.h 109MAC_NONE opt_dontuse.h 110MAC_PARTITION opt_dontuse.h 111MAC_PORTACL opt_dontuse.h 112MAC_SEEOTHERUIDS opt_dontuse.h 113MAC_STATIC opt_mac.h 114MAC_STUB opt_dontuse.h 115MAC_TEST opt_dontuse.h 116MD_ROOT opt_md.h 117MD_ROOT_SIZE opt_md.h 118MFI_DEBUG opt_mfi.h 119MFI_DECODE_LOG opt_mfi.h 120MPROF_BUFFERS opt_mprof.h 121MPROF_HASH_SIZE opt_mprof.h 122MUTEX_WAKE_ALL 123NSWBUF_MIN opt_swap.h 124PANIC_REBOOT_WAIT_TIME opt_panic.h 125PPC_DEBUG opt_ppc.h 126PPC_PROBE_CHIPSET opt_ppc.h 127PPS_SYNC opt_ntp.h 128PREEMPTION opt_sched.h 129QUOTA 130SCHED_4BSD opt_sched.h 131SCHED_CORE opt_sched.h 132SCHED_ULE opt_sched.h 133SHOW_BUSYBUFS 134SLEEPQUEUE_PROFILING 135SLHCI_DEBUG opt_slhci.h 136SPX_HACK 137SUIDDIR 138MSGMNB opt_sysvipc.h 139MSGMNI opt_sysvipc.h 140MSGSEG opt_sysvipc.h 141MSGSSZ opt_sysvipc.h 142MSGTQL opt_sysvipc.h 143SEMMAP opt_sysvipc.h 144SEMMNI opt_sysvipc.h 145SEMMNS opt_sysvipc.h 146SEMMNU opt_sysvipc.h 147SEMMSL opt_sysvipc.h 148SEMOPM opt_sysvipc.h 149SEMUME opt_sysvipc.h 150SHMALL opt_sysvipc.h 151SHMMAX opt_sysvipc.h 152SHMMAXPGS opt_sysvipc.h 153SHMMIN opt_sysvipc.h 154SHMMNI opt_sysvipc.h 155SHMSEG opt_sysvipc.h 156SYSVMSG opt_sysvipc.h 157SYSVSEM opt_sysvipc.h 158SYSVSHM opt_sysvipc.h 159SW_WATCHDOG opt_watchdog.h 160TURNSTILE_PROFILING 161TTYHOG opt_tty.h 162VFS_AIO 163VERBOSE_SYSINIT opt_global.h 164WLCACHE opt_wavelan.h 165WLDEBUG opt_wavelan.h 166COMMONID opt_commonid.h 167 168# POSIX kernel options 169P1003_1B_MQUEUE opt_posix.h 170P1003_1B_SEMAPHORES opt_posix.h 171_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 172 173# Do we want the config file compiled into the kernel? 174INCLUDE_CONFIG_FILE opt_config.h 175 176# Options for static filesystems. These should only be used at config 177# time, since the corresponding lkms cannot work if there are any static 178# dependencies. Unusability is enforced by hiding the defines for the 179# options in a never-included header. 180CD9660 opt_dontuse.h 181CODA opt_dontuse.h 182EXT2FS opt_dontuse.h 183FDESCFS opt_dontuse.h 184HPFS opt_dontuse.h 185MSDOSFS opt_dontuse.h 186NTFS opt_dontuse.h 187NULLFS opt_dontuse.h 188NWFS opt_dontuse.h 189PORTALFS opt_dontuse.h 190PROCFS opt_dontuse.h 191PSEUDOFS opt_dontuse.h 192REISERFS opt_dontuse.h 193SMBFS opt_dontuse.h 194UDF opt_dontuse.h 195UMAPFS opt_dontuse.h 196UNIONFS opt_dontuse.h 197 198# Pseudofs debugging 199PSEUDOFS_TRACE opt_pseudofs.h 200 201# Broken - ffs_snapshot() dependency from ufs_lookup() :-( 202FFS opt_ffs_broken_fixme.h 203 204# These static filesystems have one slightly bogus static dependency in 205# sys/i386/i386/autoconf.c. If any of these filesystems are 206# statically compiled into the kernel, code for mounting them as root 207# filesystems will be enabled - but look below. 208NFSCLIENT opt_nfs.h 209NFSSERVER opt_nfs.h 210 211# filesystems and libiconv bridge 212CD9660_ICONV opt_dontuse.h 213MSDOSFS_ICONV opt_dontuse.h 214NTFS_ICONV opt_dontuse.h 215UDF_ICONV opt_dontuse.h 216 217# If you are following the conditions in the copyright, 218# you can enable soft-updates which will speed up a lot of thigs 219# and make the system safer from crashes at the same time. 220# otherwise a STUB module will be compiled in. 221SOFTUPDATES opt_ffs.h 222 223# On small, embedded systems, it can be useful to turn off support for 224# snapshots. It saves about 30-40k for a feature that would be lightly 225# used, if it is used at all. 226NO_FFS_SNAPSHOT opt_ffs.h 227 228# Enabling this option turns on support for Access Control Lists in UFS, 229# which can be used to support high security configurations. Depends on 230# UFS_EXTATTR. 231UFS_ACL opt_ufs.h 232 233# Enabling this option turns on support for extended attributes in UFS-based 234# filesystems, which can be used to support high security configurations 235# as well as new filesystem features. 236UFS_EXTATTR opt_ufs.h 237UFS_EXTATTR_AUTOSTART opt_ufs.h 238 239# Enable fast hash lookups for large directories on UFS-based filesystems. 240UFS_DIRHASH opt_ufs.h 241 242# The below sentence is not in English, and neither is this one. 243# We plan to remove the static dependences above, with a 244# <filesystem>_ROOT option to control if it usable as root. This list 245# allows these options to be present in config files already (though 246# they won't make any difference yet). 247NFS_ROOT opt_nfsroot.h 248 249# SMB/CIFS requester 250NETSMB opt_netsmb.h 251 252# Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"! 253MSDOSFS_LARGE opt_msdosfs.h 254 255# Options used only in subr_param.c. 256HZ opt_param.h 257MAXFILES opt_param.h 258NBUF opt_param.h 259NMBCLUSTERS opt_param.h 260NSFBUFS opt_param.h 261VM_BCACHE_SIZE_MAX opt_param.h 262VM_SWZONE_SIZE_MAX opt_param.h 263MAXUSERS 264DFLDSIZ opt_param.h 265MAXDSIZ opt_param.h 266MAXSSIZ opt_param.h 267 268# Generic SCSI options. 269CAM_MAX_HIGHPOWER opt_cam.h 270CAMDEBUG opt_cam.h 271CAM_DEBUG_DELAY opt_cam.h 272CAM_DEBUG_BUS opt_cam.h 273CAM_DEBUG_TARGET opt_cam.h 274CAM_DEBUG_LUN opt_cam.h 275CAM_DEBUG_FLAGS opt_cam.h 276CAM_NEW_TRAN_CODE opt_cam.h 277SCSI_DELAY opt_scsi.h 278SCSI_NO_SENSE_STRINGS opt_scsi.h 279SCSI_NO_OP_STRINGS opt_scsi.h 280 281# Options used only in cam/scsi/scsi_cd.c 282CHANGER_MIN_BUSY_SECONDS opt_cd.h 283CHANGER_MAX_BUSY_SECONDS opt_cd.h 284 285# Options used only in cam/scsi/scsi_sa.c. 286SA_IO_TIMEOUT opt_sa.h 287SA_SPACE_TIMEOUT opt_sa.h 288SA_REWIND_TIMEOUT opt_sa.h 289SA_ERASE_TIMEOUT opt_sa.h 290SA_1FM_AT_EOD opt_sa.h 291 292# Options used only in cam/scsi/scsi_pt.c 293SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 294 295# Options used only in cam/scsi/scsi_ses.c 296SES_ENABLE_PASSTHROUGH opt_ses.h 297 298# Options used in dev/sym/ (Symbios SCSI driver). 299SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 300 # Allows the ncr to take precedence 301 # 1 (1<<0) -> 810a, 860 302 # 2 (1<<1) -> 825a, 875, 885, 895 303 # 4 (1<<2) -> 895a, 896, 1510d 304SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 305 # disabled:0 (default), enabled:1 306SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 307 # disabled:0, enabled:1 (default) 308SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 309 # default:8, range:[1..64] 310 311# Options used only in pci/ncr.c 312SCSI_NCR_DEBUG opt_ncr.h 313SCSI_NCR_MAX_SYNC opt_ncr.h 314SCSI_NCR_MAX_WIDE opt_ncr.h 315SCSI_NCR_MYADDR opt_ncr.h 316 317# Options used only in dev/isp/* 318ISP_TARGET_MODE opt_isp.h 319ISP_FW_CRASH_DUMP opt_isp.h 320ISP_DEFAULT_ROLES opt_isp.h 321 322# Options used in the 'ata' ATA/ATAPI driver 323ATA_STATIC_ID opt_ata.h 324ATA_NOPCI opt_ata.h 325 326# Net stuff. 327ACCEPT_FILTER_DATA 328ACCEPT_FILTER_HTTP 329ALTQ opt_global.h 330ALTQ_CBQ opt_altq.h 331ALTQ_RED opt_altq.h 332ALTQ_RIO opt_altq.h 333ALTQ_HFSC opt_altq.h 334ALTQ_CDNR opt_altq.h 335ALTQ_PRIQ opt_altq.h 336ALTQ_NOPCC opt_altq.h 337ALTQ_DEBUG opt_altq.h 338BOOTP opt_bootp.h 339BOOTP_COMPAT opt_bootp.h 340BOOTP_NFSROOT opt_bootp.h 341BOOTP_NFSV3 opt_bootp.h 342BOOTP_WIRED_TO opt_bootp.h 343DEVICE_POLLING 344DEV_PF opt_pf.h 345DEV_PFLOG opt_pf.h 346DEV_PFSYNC opt_pf.h 347ETHER_II opt_ef.h 348ETHER_8023 opt_ef.h 349ETHER_8022 opt_ef.h 350ETHER_SNAP opt_ef.h 351MROUTING opt_mrouting.h 352PIM opt_mrouting.h 353INET opt_inet.h 354INET6 opt_inet6.h 355IPSEC opt_ipsec.h 356IPSEC_ESP opt_ipsec.h 357IPSEC_DEBUG opt_ipsec.h 358IPSEC_FILTERGIF opt_ipsec.h 359FAST_IPSEC opt_ipsec.h 360IPDIVERT 361DUMMYNET opt_ipdn.h 362IPFILTER opt_ipfilter.h 363IPFILTER_LOG opt_ipfilter.h 364IPFILTER_LOOKUP opt_ipfilter.h 365IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 366IPFIREWALL opt_ipfw.h 367IPFIREWALL_VERBOSE opt_ipfw.h 368IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 369IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 370IPFIREWALL_FORWARD opt_ipfw.h 371IPFIREWALL_FORWARD_EXTENDED opt_ipfw.h 372IPSTEALTH 373IPX 374IPXIP opt_ipx.h 375LIBMBPOOL 376LIBMCHAIN 377LIBALIAS 378MBUF_STRESS_TEST 379NCP 380NETATALK opt_atalk.h 381NET_WITH_GIANT opt_net.h 382PPP_BSDCOMP opt_ppp.h 383PPP_DEFLATE opt_ppp.h 384PPP_FILTER opt_ppp.h 385SLIP_IFF_OPTS opt_slip.h 386TCPDEBUG 387TCP_SIGNATURE opt_inet.h 388TCP_SACK_DEBUG opt_tcp_sack.h 389TCP_DROP_SYNFIN opt_tcp_input.h 390DEV_VLAN opt_vlan.h 391VLAN_ARRAY opt_vlan.h 392XBONEHACK 393 394# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 395# Each netgraph node type can be either be compiled into the kernel 396# or loaded dynamically. To get the former, include the corresponding 397# option below. Each type has its own man page, e.g. ng_async(4). 398NETGRAPH 399NETGRAPH_DEBUG opt_netgraph.h 400NETGRAPH_ASYNC opt_netgraph.h 401NETGRAPH_ATMLLC opt_netgraph.h 402NETGRAPH_ATM_ATMPIF opt_netgraph.h 403NETGRAPH_BLUETOOTH opt_netgraph.h 404NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 405NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 406NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 407NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 408NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 409NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 410NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 411NETGRAPH_BPF opt_netgraph.h 412NETGRAPH_BRIDGE opt_netgraph.h 413NETGRAPH_CISCO opt_netgraph.h 414NETGRAPH_DEVICE opt_netgraph.h 415NETGRAPH_ECHO opt_netgraph.h 416NETGRAPH_EIFACE opt_netgraph.h 417NETGRAPH_ETHER opt_netgraph.h 418NETGRAPH_FEC opt_netgraph.h 419NETGRAPH_FRAME_RELAY opt_netgraph.h 420NETGRAPH_GIF opt_netgraph.h 421NETGRAPH_GIF_DEMUX opt_netgraph.h 422NETGRAPH_HOLE opt_netgraph.h 423NETGRAPH_IFACE opt_netgraph.h 424NETGRAPH_IP_INPUT opt_netgraph.h 425NETGRAPH_IPFW opt_netgraph.h 426NETGRAPH_KSOCKET opt_netgraph.h 427NETGRAPH_L2TP opt_netgraph.h 428NETGRAPH_LMI opt_netgraph.h 429# MPPC compression requires proprietary files (not included) 430NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 431NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 432NETGRAPH_NAT opt_netgraph.h 433NETGRAPH_NETFLOW opt_netgraph.h 434NETGRAPH_ONE2MANY opt_netgraph.h 435NETGRAPH_PPP opt_netgraph.h 436NETGRAPH_PPPOE opt_netgraph.h 437NETGRAPH_PPTPGRE opt_netgraph.h 438NETGRAPH_RFC1490 opt_netgraph.h 439NETGRAPH_SOCKET opt_netgraph.h 440NETGRAPH_SPLIT opt_netgraph.h 441NETGRAPH_SPPP opt_netgraph.h 442NETGRAPH_TCPMSS opt_netgraph.h 443NETGRAPH_TEE opt_netgraph.h 444NETGRAPH_TTY opt_netgraph.h 445NETGRAPH_UI opt_netgraph.h 446NETGRAPH_VJC opt_netgraph.h 447 448# NgATM options 449NGATM_ATM opt_netgraph.h 450NGATM_ATMBASE opt_netgraph.h 451NGATM_SSCOP opt_netgraph.h 452NGATM_SSCFU opt_netgraph.h 453NGATM_UNI opt_netgraph.h 454NGATM_CCATM opt_netgraph.h 455 456# DRM options 457DRM_DEBUG opt_drm.h 458 459ZERO_COPY_SOCKETS opt_zero.h 460TI_PRIVATE_JUMBOS opt_ti.h 461TI_JUMBO_HDRSPLIT opt_ti.h 462 463# ATM (HARP version) 464ATM_CORE opt_atm.h 465ATM_IP opt_atm.h 466ATM_SIGPVC opt_atm.h 467ATM_SPANS opt_atm.h 468ATM_UNI opt_atm.h 469 470# XXX Conflict: # of devices vs network protocol (Native ATM). 471# This makes "atm.h" unusable. 472NATM 473 474# DPT driver debug flags 475DPT_MEASURE_PERFORMANCE opt_dpt.h 476DPT_HANDLE_TIMEOUTS opt_dpt.h 477DPT_TIMEOUT_FACTOR opt_dpt.h 478DPT_LOST_IRQ opt_dpt.h 479DPT_RESET_HBA opt_dpt.h 480 481# Misc debug flags. Most of these should probably be replaced with 482# 'DEBUG', and then let people recompile just the interesting modules 483# with 'make CC="cc -DDEBUG"'. 484CLUSTERDEBUG opt_debug_cluster.h 485DEBUG_1284 opt_ppb_1284.h 486VP0_DEBUG opt_vpo.h 487LPT_DEBUG opt_lpt.h 488PLIP_DEBUG opt_plip.h 489LOCKF_DEBUG opt_debug_lockf.h 490NETATALKDEBUG opt_atalk.h 491SI_DEBUG opt_debug_si.h 492 493# Fb options 494FB_DEBUG opt_fb.h 495FB_INSTALL_CDEV opt_fb.h 496 497# ppbus related options 498PERIPH_1284 opt_ppb_1284.h 499DONTPROBE_1284 opt_ppb_1284.h 500 501# smbus related options 502ENABLE_ALART opt_intpm.h 503 504# These cause changes all over the kernel 505BLKDEV_IOSIZE opt_global.h 506BURN_BRIDGES opt_global.h 507DEBUG opt_global.h 508DEBUG_LOCKS opt_global.h 509DEBUG_VFS_LOCKS opt_global.h 510DIAGNOSTIC opt_global.h 511INVARIANT_SUPPORT opt_global.h 512INVARIANTS opt_global.h 513MCLSHIFT opt_global.h 514MUTEX_DEBUG opt_global.h 515MUTEX_NOINLINE opt_global.h 516MUTEX_PROFILING opt_global.h 517MSIZE opt_global.h 518REGRESSION opt_global.h 519RESTARTABLE_PANICS opt_global.h 520RWLOCK_NOINLINE opt_global.h 521VFS_BIO_DEBUG opt_global.h 522 523# These are VM related options 524VM_KMEM_SIZE opt_vm.h 525VM_KMEM_SIZE_SCALE opt_vm.h 526VM_KMEM_SIZE_MAX opt_vm.h 527NO_SWAPPING opt_vm.h 528MALLOC_MAKE_FAILURES opt_vm.h 529MALLOC_PROFILE opt_vm.h 530PQ_NOOPT opt_vmpage.h 531 532# The MemGuard replacement allocator used for tamper-after-free detection 533DEBUG_MEMGUARD opt_vm.h 534 535# The RedZone malloc(9) protection 536DEBUG_REDZONE opt_vm.h 537 538# Standard SMP options 539SMP opt_global.h 540 541# Size of the kernel message buffer 542MSGBUF_SIZE opt_msgbuf.h 543 544# NFS options 545NFS_MINATTRTIMO opt_nfs.h 546NFS_MAXATTRTIMO opt_nfs.h 547NFS_MINDIRATTRTIMO opt_nfs.h 548NFS_MAXDIRATTRTIMO opt_nfs.h 549NFS_GATHERDELAY opt_nfs.h 550NFS_WDELAYHASHSIZ opt_nfs.h 551NFS_DEBUG opt_nfs.h 552 553# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 554OVERRIDE_CARD opt_bktr.h 555OVERRIDE_TUNER opt_bktr.h 556OVERRIDE_DBX opt_bktr.h 557OVERRIDE_MSP opt_bktr.h 558BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 559BROOKTREE_ALLOC_PAGES opt_bktr.h 560BKTR_OVERRIDE_CARD opt_bktr.h 561BKTR_OVERRIDE_TUNER opt_bktr.h 562BKTR_OVERRIDE_DBX opt_bktr.h 563BKTR_OVERRIDE_MSP opt_bktr.h 564BKTR_SYSTEM_DEFAULT opt_bktr.h 565BKTR_ALLOC_PAGES opt_bktr.h 566BKTR_USE_PLL opt_bktr.h 567BKTR_GPIO_ACCESS opt_bktr.h 568BKTR_NO_MSP_RESET opt_bktr.h 569BKTR_430_FX_MODE opt_bktr.h 570BKTR_SIS_VIA_MODE opt_bktr.h 571BKTR_USE_FREEBSD_SMBUS opt_bktr.h 572BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 573 574# options for serial support 575COM_ESP opt_sio.h 576COM_MULTIPORT opt_sio.h 577BREAK_TO_DEBUGGER opt_comconsole.h 578ALT_BREAK_TO_DEBUGGER opt_comconsole.h 579 580# Options to support PPS 581UART_PPS_ON_CTS opt_uart.h 582 583# options for bus/device framework 584BUS_DEBUG opt_bus.h 585 586# options for USB support 587USB_DEBUG opt_usb.h 588USBVERBOSE opt_usb.h 589UKBD_DFLT_KEYMAP opt_ukbd.h 590UPLCOM_INTR_INTERVAL opt_uplcom.h 591UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 592UVSCOM_INTR_INTERVAL opt_uvscom.h 593 594# Embedded system options 595INIT_PATH 596 597ROOTDEVNAME 598 599FDC_DEBUG opt_fdc.h 600PCFCLOCK_VERBOSE opt_pcfclock.h 601PCFCLOCK_MAX_RETRIES opt_pcfclock.h 602 603KTR opt_global.h 604KTR_ALQ opt_ktr.h 605KTR_MASK opt_ktr.h 606KTR_CPUMASK opt_ktr.h 607KTR_COMPILE opt_global.h 608KTR_ENTRIES opt_global.h 609KTR_VERBOSE opt_ktr.h 610WITNESS opt_global.h 611WITNESS_KDB opt_witness.h 612WITNESS_SKIPSPIN opt_witness.h 613 614# options for ACPI support 615ACPI_DEBUG opt_acpi.h 616ACPI_MAX_THREADS opt_acpi.h 617ACPI_NO_SEMAPHORES opt_acpi.h 618ACPICA_PEDANTIC opt_acpi.h 619 620# ISA support 621DEV_ISA opt_isa.h 622ISAPNP opt_isa.h 623 624# options for DEVFS, see sys/fs/devfs/devfs.h 625NDEVFSINO opt_devfs.h 626NDEVFSOVERFLOW opt_devfs.h 627 628# various 'device presence' options. 629DEV_BPF opt_bpf.h 630DEV_MCA opt_mca.h 631DEV_CARP opt_carp.h 632DEV_SPLASH opt_splash.h 633 634EISA_SLOTS opt_eisa.h 635 636# ed driver 637ED_HPP opt_ed.h 638ED_3C503 opt_ed.h 639ED_SIC opt_ed.h 640 641# bce driver 642BCE_DEBUG opt_bce.h 643 644# wi driver 645WI_SYMBOL_FIRMWARE opt_wi.h 646 647SOCKBUF_DEBUG opt_global.h 648 649# options for ubsec driver 650UBSEC_DEBUG opt_ubsec.h 651UBSEC_RNDTEST opt_ubsec.h 652UBSEC_NO_RNG opt_ubsec.h 653 654# options for hifn driver 655HIFN_DEBUG opt_hifn.h 656HIFN_RNDTEST opt_hifn.h 657 658# options for safenet driver 659SAFE_DEBUG opt_safe.h 660SAFE_NO_RNG opt_safe.h 661SAFE_RNDTEST opt_safe.h 662 663# syscons options 664MAXCONS opt_syscons.h 665SC_ALT_MOUSE_IMAGE opt_syscons.h 666SC_CUT_SPACES2TABS opt_syscons.h 667SC_CUT_SEPCHARS opt_syscons.h 668SC_DEBUG_LEVEL opt_syscons.h 669SC_DFLT_FONT opt_syscons.h 670SC_DISABLE_KDBKEY opt_syscons.h 671SC_DISABLE_REBOOT opt_syscons.h 672SC_HISTORY_SIZE opt_syscons.h 673SC_KERNEL_CONS_ATTR opt_syscons.h 674SC_KERNEL_CONS_REV_ATTR opt_syscons.h 675SC_MOUSE_CHAR opt_syscons.h 676SC_NO_CUTPASTE opt_syscons.h 677SC_NO_FONT_LOADING opt_syscons.h 678SC_NO_HISTORY opt_syscons.h 679SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 680SC_NO_SYSMOUSE opt_syscons.h 681SC_NORM_ATTR opt_syscons.h 682SC_NORM_REV_ATTR opt_syscons.h 683SC_PIXEL_MODE opt_syscons.h 684SC_RENDER_DEBUG opt_syscons.h 685SC_TWOBUTTON_MOUSE opt_syscons.h 686 687# kbd options 688KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 689KBD_INSTALL_CDEV opt_kbd.h 690KBD_MAXRETRY opt_kbd.h 691KBD_MAXWAIT opt_kbd.h 692KBD_RESETDELAY opt_kbd.h 693KBDIO_DEBUG opt_kbd.h 694 695# options for the Atheros driver 696ATH_DEBUG opt_ath.h 697ATH_TXBUF opt_ath.h 698ATH_RXBUF opt_ath.h 699ATH_DIAGAPI opt_ath.h 700ATH_TX99_DIAG opt_ath.h 701 702# dcons options 703DCONS_BUF_SIZE opt_dcons.h 704DCONS_POLL_HZ opt_dcons.h 705DCONS_FORCE_CONSOLE opt_dcons.h 706DCONS_FORCE_GDB opt_dcons.h 707 708# Static unit counts 709NI4BTRC opt_i4b.h 710NI4BRBCH opt_i4b.h 711NI4BTEL opt_i4b.h 712NI4BIPR opt_i4b.h 713NI4BING opt_i4b.h 714NI4BISPPP opt_i4b.h 715 716# VFS options 717LOOKUP_SHARED opt_vfs.h 718 719# HWPMC options 720HWPMC_HOOKS 721 722# XBOX options for FreeBSD/i386, but some files are MI 723XBOX opt_xbox.h 724 725# XFS 726XFS 727