options revision 134542
1# $FreeBSD: head/sys/conf/options 134542 2004-08-30 23:03:58Z peter $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affect only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AHC_ALLOW_MEMIO opt_aic7xxx.h 35AHC_TMODE_ENABLE opt_aic7xxx.h 36AHC_DUMP_EEPROM opt_aic7xxx.h 37AHC_DEBUG opt_aic7xxx.h 38AHC_DEBUG_OPTS opt_aic7xxx.h 39AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40AHD_DEBUG opt_aic79xx.h 41AHD_DEBUG_OPTS opt_aic79xx.h 42AHD_TMODE_ENABLE opt_aic79xx.h 43AHD_REG_PRETTY_PRINT opt_aic79xx.h 44ADW_ALLOW_MEMIO opt_adw.h 45 46TWA_DEBUG opt_twa.h 47TWA_FLASH_FIRMWARE opt_twa.h 48 49# Debugging options. 50DDB 51DDB_NUMSYM opt_ddb.h 52GDB 53GDBSPEED opt_gdb.h 54KDB opt_global.h 55KDB_TRACE opt_kdb.h 56KDB_UNATTENDED opt_kdb.h 57 58# Miscellaneous options. 59ADAPTIVE_GIANT opt_adaptive_mutexes.h 60NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 61ALQ 62CODA_COMPAT_5 opt_coda.h 63NVCODA opt_coda.h 64COMPAT_43 opt_compat.h 65COMPAT_FREEBSD4 opt_compat.h 66COMPILING_LINT opt_global.h 67CONSPEED opt_comconsole.h 68CY_PCI_FASTINTR 69DIRECTIO opt_directio.h 70FULL_PREEMPTION 71GEOM_AES opt_geom.h 72GEOM_APPLE opt_geom.h 73GEOM_BDE opt_geom.h 74GEOM_BSD opt_geom.h 75GEOM_CONCAT opt_geom.h 76GEOM_FOX opt_geom.h 77GEOM_GATE opt_geom.h 78GEOM_GPT opt_geom.h 79GEOM_LABEL opt_geom.h 80GEOM_MBR opt_geom.h 81GEOM_MIRROR opt_geom.h 82GEOM_NOP opt_geom.h 83GEOM_PC98 opt_geom.h 84GEOM_RAID3 opt_geom.h 85GEOM_STRIPE opt_geom.h 86GEOM_SUNLABEL opt_geom.h 87GEOM_UZIP opt_geom.h 88GEOM_VOL opt_geom.h 89KSTACK_MAX_PAGES 90KSTACK_PAGES 91KTRACE 92KTRACE_REQUEST_POOL opt_ktrace.h 93LIBICONV 94MAC 95MAC_ALWAYS_LABEL_MBUF opt_mac.h 96MAC_BIBA opt_dontuse.h 97MAC_BSDEXTENDED opt_dontuse.h 98MAC_DEBUG opt_mac.h 99MAC_IFOFF opt_dontuse.h 100MAC_LOMAC opt_dontuse.h 101MAC_MLS opt_dontuse.h 102MAC_NONE opt_dontuse.h 103MAC_PARTITION opt_dontuse.h 104MAC_PORTACL opt_dontuse.h 105MAC_SEEOTHERUIDS opt_dontuse.h 106MAC_STATIC opt_mac.h 107MAC_STUB opt_dontuse.h 108MAC_TEST opt_dontuse.h 109MD_ROOT opt_md.h 110MD_ROOT_SIZE opt_md.h 111MPROF_BUFFERS opt_mprof.h 112MPROF_HASH_SIZE opt_mprof.h 113MUTEX_WAKE_ALL 114NSWBUF_MIN opt_swap.h 115PANIC_REBOOT_WAIT_TIME opt_panic.h 116PPS_SYNC opt_ntp.h 117PUC_FASTINTR opt_puc.h 118QUOTA 119SCHED_4BSD opt_sched.h 120SCHED_ULE opt_sched.h 121SHOW_BUSYBUFS 122SLEEPQUEUE_PROFILING 123SPX_HACK 124SUIDDIR opt_suiddir.h 125MSGMNB opt_sysvipc.h 126MSGMNI opt_sysvipc.h 127MSGSEG opt_sysvipc.h 128MSGSSZ opt_sysvipc.h 129MSGTQL opt_sysvipc.h 130SEMMAP opt_sysvipc.h 131SEMMNI opt_sysvipc.h 132SEMMNS opt_sysvipc.h 133SEMMNU opt_sysvipc.h 134SEMMSL opt_sysvipc.h 135SEMOPM opt_sysvipc.h 136SEMUME opt_sysvipc.h 137SHMALL opt_sysvipc.h 138SHMMAX opt_sysvipc.h 139SHMMAXPGS opt_sysvipc.h 140SHMMIN opt_sysvipc.h 141SHMMNI opt_sysvipc.h 142SHMSEG opt_sysvipc.h 143SYSVMSG opt_sysvipc.h 144SYSVSEM opt_sysvipc.h 145SYSVSHM opt_sysvipc.h 146SW_WATCHDOG opt_watchdog.h 147TURNSTILE_PROFILING 148TTYHOG opt_tty.h 149VFS_AIO 150WLCACHE opt_wavelan.h 151WLDEBUG opt_wavelan.h 152 153# POSIX kernel options 154P1003_1B_SEMAPHORES opt_posix.h 155_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 156 157# Do we want the config file compiled into the kernel? 158INCLUDE_CONFIG_FILE opt_config.h 159 160# Options for static filesystems. These should only be used at config 161# time, since the corresponding lkms cannot work if there are any static 162# dependencies. Unusability is enforced by hiding the defines for the 163# options in a never-included header. 164CD9660 opt_dontuse.h 165CODA opt_dontuse.h 166EXT2FS opt_dontuse.h 167FDESCFS opt_dontuse.h 168HPFS opt_dontuse.h 169LINPROCFS opt_dontuse.h 170MSDOSFS opt_dontuse.h 171NTFS opt_dontuse.h 172NULLFS opt_dontuse.h 173NWFS opt_dontuse.h 174PORTALFS opt_dontuse.h 175PROCFS opt_dontuse.h 176PSEUDOFS opt_dontuse.h 177SMBFS opt_dontuse.h 178UDF opt_dontuse.h 179UMAPFS opt_dontuse.h 180UNIONFS opt_dontuse.h 181 182# Broken - ffs_snapshot() dependency from ufs_lookup() :-( 183FFS opt_ffs_broken_fixme.h 184 185# These static filesystems have one slightly bogus static dependency in 186# sys/i386/i386/autoconf.c. If any of these filesystems are 187# statically compiled into the kernel, code for mounting them as root 188# filesystems will be enabled - but look below. 189NFSCLIENT opt_nfs.h 190NFSSERVER opt_nfs.h 191 192# filesystems and libiconv bridge 193CD9660_ICONV opt_dontuse.h 194MSDOSFS_ICONV opt_dontuse.h 195NTFS_ICONV opt_dontuse.h 196UDF_ICONV opt_dontuse.h 197 198# If you are following the conditions in the copyright, 199# you can enable soft-updates which will speed up a lot of thigs 200# and make the system safer from crashes at the same time. 201# otherwise a STUB module will be compiled in. 202SOFTUPDATES opt_ffs.h 203 204# Enabling this option turns on support for Access Control Lists in UFS, 205# which can be used to support high security configurations. Depends on 206# UFS_EXTATTR. 207UFS_ACL opt_ufs.h 208 209# Enabling this option turns on support for extended attributes in UFS-based 210# filesystems, which can be used to support high security configurations 211# as well as new filesystem features. 212UFS_EXTATTR opt_ufs.h 213UFS_EXTATTR_AUTOSTART opt_ufs.h 214 215# Enable fast hash lookups for large directories on UFS-based filesystems. 216UFS_DIRHASH opt_ufs.h 217 218# The below sentence is not in English, and neither is this one. 219# We plan to remove the static dependences above, with a 220# <filesystem>_ROOT option to control if it usable as root. This list 221# allows these options to be present in config files already (though 222# they won't make any difference yet). 223NFS_ROOT opt_nfsroot.h 224 225# SMB/CIFS requester 226NETSMB opt_netsmb.h 227NETSMBCRYPTO opt_netsmb.h 228 229# Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"! 230MSDOSFS_LARGE opt_msdosfs.h 231 232# Options used only in subr_param.c. 233HZ opt_param.h 234MAXFILES opt_param.h 235NBUF opt_param.h 236NMBCLUSTERS opt_param.h 237NSFBUFS opt_param.h 238VM_BCACHE_SIZE_MAX opt_param.h 239VM_SWZONE_SIZE_MAX opt_param.h 240MAXUSERS 241DFLDSIZ opt_param.h 242MAXDSIZ opt_param.h 243MAXSSIZ opt_param.h 244 245# Generic SCSI options. 246CAM_MAX_HIGHPOWER opt_cam.h 247CAMDEBUG opt_cam.h 248CAM_DEBUG_DELAY opt_cam.h 249CAM_DEBUG_BUS opt_cam.h 250CAM_DEBUG_TARGET opt_cam.h 251CAM_DEBUG_LUN opt_cam.h 252CAM_DEBUG_FLAGS opt_cam.h 253CAM_NEW_TRAN_CODE opt_cam.h 254SCSI_DELAY opt_scsi.h 255SCSI_NO_SENSE_STRINGS opt_scsi.h 256SCSI_NO_OP_STRINGS opt_scsi.h 257 258# Options used only in cam/scsi/scsi_cd.c 259CHANGER_MIN_BUSY_SECONDS opt_cd.h 260CHANGER_MAX_BUSY_SECONDS opt_cd.h 261 262# Options used only in cam/scsi/scsi_sa.c. 263SA_IO_TIMEOUT opt_sa.h 264SA_SPACE_TIMEOUT opt_sa.h 265SA_REWIND_TIMEOUT opt_sa.h 266SA_ERASE_TIMEOUT opt_sa.h 267SA_1FM_AT_EOD opt_sa.h 268 269# Options used only in cam/scsi/scsi_pt.c 270SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 271 272# Options used only in cam/scsi/scsi_ses.c 273SES_ENABLE_PASSTHROUGH opt_ses.h 274 275# Options used in dev/sym/ (Symbios SCSI driver). 276SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 277 # Allows the ncr to take precedence 278 # 1 (1<<0) -> 810a, 860 279 # 2 (1<<1) -> 825a, 875, 885, 895 280 # 4 (1<<2) -> 895a, 896, 1510d 281SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 282 # disabled:0 (default), enabled:1 283SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 284 # disabled:0, enabled:1 (default) 285SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 286 # default:8, range:[1..64] 287 288# Options used only in pci/ncr.c 289SCSI_NCR_DEBUG opt_ncr.h 290SCSI_NCR_MAX_SYNC opt_ncr.h 291SCSI_NCR_MAX_WIDE opt_ncr.h 292SCSI_NCR_MYADDR opt_ncr.h 293 294# Options used only in dev/isp/* 295ISP_TARGET_MODE opt_isp.h 296ISP_FW_CRASH_DUMP opt_isp.h 297 298# Options used in the 'ata' ATA/ATAPI driver 299ATA_STATIC_ID opt_ata.h 300ATA_NOPCI opt_ata.h 301DEV_ATADISK opt_ata.h 302DEV_ATAPICD opt_ata.h 303DEV_ATAPIST opt_ata.h 304DEV_ATAPIFD opt_ata.h 305DEV_ATAPICAM opt_ata.h 306DEV_ATARAID opt_ata.h 307 308# Net stuff. 309ACCEPT_FILTER_DATA 310ACCEPT_FILTER_HTTP 311ALTQ opt_global.h 312ALTQ_CBQ opt_altq.h 313ALTQ_RED opt_altq.h 314ALTQ_RIO opt_altq.h 315ALTQ_HFSC opt_altq.h 316ALTQ_CDNR opt_altq.h 317ALTQ_PRIQ opt_altq.h 318ALTQ_NOPCC opt_altq.h 319ALTQ_DEBUG opt_altq.h 320BOOTP opt_bootp.h 321BOOTP_COMPAT opt_bootp.h 322BOOTP_NFSROOT opt_bootp.h 323BOOTP_NFSV3 opt_bootp.h 324BOOTP_WIRED_TO opt_bootp.h 325BRIDGE opt_bdg.h 326DEV_PF opt_pf.h 327DEV_PFLOG opt_pf.h 328DEV_PFSYNC opt_pf.h 329ETHER_II opt_ef.h 330ETHER_8023 opt_ef.h 331ETHER_8022 opt_ef.h 332ETHER_SNAP opt_ef.h 333MROUTING opt_mrouting.h 334PIM opt_mrouting.h 335INET opt_inet.h 336INET6 opt_inet6.h 337IPSEC opt_ipsec.h 338IPSEC_ESP opt_ipsec.h 339IPSEC_DEBUG opt_ipsec.h 340IPSEC_FILTERGIF opt_ipsec.h 341FAST_IPSEC opt_ipsec.h 342IPDIVERT 343DUMMYNET opt_ipdn.h 344IPFILTER opt_ipfilter.h 345IPFILTER_LOG opt_ipfilter.h 346IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 347IPFIREWALL opt_ipfw.h 348IPFIREWALL_VERBOSE opt_ipfw.h 349IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 350IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 351IPFIREWALL_FORWARD opt_ipfw.h 352IPV6FIREWALL opt_ip6fw.h 353IPV6FIREWALL_VERBOSE opt_ip6fw.h 354IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 355IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 356IPSTEALTH 357IPX 358IPXIP opt_ipx.h 359LIBMBPOOL 360LIBMCHAIN 361MBUF_STRESS_TEST opt_mbuf_stress_test.h 362NCP 363NETATALK opt_atalk.h 364NET_WITH_GIANT opt_net.h 365PPP_BSDCOMP opt_ppp.h 366PPP_DEFLATE opt_ppp.h 367PPP_FILTER opt_ppp.h 368SLIP_IFF_OPTS opt_slip.h 369TCPDEBUG 370TCP_SIGNATURE opt_inet.h 371TCP_SACK_DEBUG opt_tcp_sack.h 372TCP_DROP_SYNFIN opt_tcp_input.h 373XBONEHACK 374 375# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 376# Each netgraph node type can be either be compiled into the kernel 377# or loaded dynamically. To get the former, include the corresponding 378# option below. Each type has its own man page, e.g. ng_async(4). 379NETGRAPH 380NETGRAPH_ASYNC opt_netgraph.h 381NETGRAPH_ATMLLC opt_netgraph.h 382NETGRAPH_ATM_ATMPIF opt_netgraph.h 383NETGRAPH_BLUETOOTH opt_netgraph.h 384NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 385NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 386NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 387NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 388NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 389NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 390NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 391NETGRAPH_BPF opt_netgraph.h 392NETGRAPH_BRIDGE opt_netgraph.h 393NETGRAPH_CISCO opt_netgraph.h 394NETGRAPH_DEVICE opt_netgraph.h 395NETGRAPH_ECHO opt_netgraph.h 396NETGRAPH_EIFACE opt_netgraph.h 397NETGRAPH_ETHER opt_netgraph.h 398NETGRAPH_FEC opt_netgraph.h 399NETGRAPH_FRAME_RELAY opt_netgraph.h 400NETGRAPH_GIF opt_netgraph.h 401NETGRAPH_GIF_DEMUX opt_netgraph.h 402NETGRAPH_HOLE opt_netgraph.h 403NETGRAPH_IFACE opt_netgraph.h 404NETGRAPH_IP_INPUT opt_netgraph.h 405NETGRAPH_KSOCKET opt_netgraph.h 406NETGRAPH_L2TP opt_netgraph.h 407NETGRAPH_LMI opt_netgraph.h 408# MPPC compression requires proprietary files (not included) 409NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 410NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 411NETGRAPH_ONE2MANY opt_netgraph.h 412NETGRAPH_PPP opt_netgraph.h 413NETGRAPH_PPPOE opt_netgraph.h 414NETGRAPH_PPTPGRE opt_netgraph.h 415NETGRAPH_RFC1490 opt_netgraph.h 416NETGRAPH_SOCKET opt_netgraph.h 417NETGRAPH_SPLIT opt_netgraph.h 418NETGRAPH_SPPP opt_netgraph.h 419NETGRAPH_TEE opt_netgraph.h 420NETGRAPH_TTY opt_netgraph.h 421NETGRAPH_UI opt_netgraph.h 422NETGRAPH_VJC opt_netgraph.h 423 424# NgATM options 425NGATM_ATM opt_netgraph.h 426NGATM_ATMBASE opt_netgraph.h 427NGATM_SSCOP opt_netgraph.h 428NGATM_SSCFU opt_netgraph.h 429NGATM_UNI opt_netgraph.h 430NGATM_CCATM opt_netgraph.h 431 432# DRM options 433DRM_DEBUG opt_drm.h 434 435ZERO_COPY_SOCKETS opt_zero.h 436TI_PRIVATE_JUMBOS opt_ti.h 437TI_JUMBO_HDRSPLIT opt_ti.h 438 439# ATM (HARP version) 440ATM_CORE opt_atm.h 441ATM_IP opt_atm.h 442ATM_SIGPVC opt_atm.h 443ATM_SPANS opt_atm.h 444ATM_UNI opt_atm.h 445 446# XXX Conflict: # of devices vs network protocol (Native ATM). 447# This makes "atm.h" unusable. 448NATM 449 450# DPT driver debug flags 451DPT_MEASURE_PERFORMANCE opt_dpt.h 452DPT_HANDLE_TIMEOUTS opt_dpt.h 453DPT_TIMEOUT_FACTOR opt_dpt.h 454DPT_LOST_IRQ opt_dpt.h 455DPT_RESET_HBA opt_dpt.h 456 457# Misc debug flags. Most of these should probably be replaced with 458# 'DEBUG', and then let people recompile just the interesting modules 459# with 'make CC="cc -DDEBUG"'. 460CLUSTERDEBUG opt_debug_cluster.h 461DEBUG_1284 opt_ppb_1284.h 462VP0_DEBUG opt_vpo.h 463LPT_DEBUG opt_lpt.h 464PLIP_DEBUG opt_plip.h 465LOCKF_DEBUG opt_debug_lockf.h 466NPX_DEBUG opt_debug_npx.h 467NETATALKDEBUG opt_atalk.h 468SI_DEBUG opt_debug_si.h 469SX_DEBUG opt_debug_sx.h 470 471# Fb options 472FB_DEBUG opt_fb.h 473FB_INSTALL_CDEV opt_fb.h 474 475# ppbus related options 476PERIPH_1284 opt_ppb_1284.h 477DONTPROBE_1284 opt_ppb_1284.h 478 479# smbus related options 480ENABLE_ALART opt_intpm.h 481 482# These cause changes all over the kernel 483BLKDEV_IOSIZE opt_global.h 484BURN_BRIDGES opt_global.h 485DEBUG opt_global.h 486DEBUG_LOCKS opt_global.h 487DEBUG_VFS_LOCKS opt_global.h 488DIAGNOSTIC opt_global.h 489INVARIANT_SUPPORT opt_global.h 490INVARIANTS opt_global.h 491LOOKUP_SHARED opt_global.h 492MCLSHIFT opt_global.h 493MUTEX_DEBUG opt_global.h 494MUTEX_NOINLINE opt_global.h 495MUTEX_PROFILING opt_global.h 496MSIZE opt_global.h 497REGRESSION opt_global.h 498RESTARTABLE_PANICS opt_global.h 499VFS_BIO_DEBUG opt_global.h 500 501# These are VM related options 502VM_KMEM_SIZE opt_vm.h 503VM_KMEM_SIZE_SCALE opt_vm.h 504VM_KMEM_SIZE_MAX opt_vm.h 505NO_SWAPPING opt_vm.h 506MALLOC_MAKE_FAILURES opt_vm.h 507MALLOC_PROFILE opt_vm.h 508PQ_NOOPT opt_vmpage.h 509PQ_NORMALCACHE opt_vmpage.h 510PQ_MEDIUMCACHE opt_vmpage.h 511PQ_LARGECACHE opt_vmpage.h 512PQ_HUGECACHE opt_vmpage.h 513PQ_CACHESIZE opt_vmpage.h 514 515# Standard SMP options 516SMP opt_global.h 517 518# Size of the kernel message buffer 519MSGBUF_SIZE opt_msgbuf.h 520 521# NFS options 522NFS_MINATTRTIMO opt_nfs.h 523NFS_MAXATTRTIMO opt_nfs.h 524NFS_MINDIRATTRTIMO opt_nfs.h 525NFS_MAXDIRATTRTIMO opt_nfs.h 526NFS_GATHERDELAY opt_nfs.h 527NFS_WDELAYHASHSIZ opt_nfs.h 528NFS_DEBUG opt_nfs.h 529 530# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 531OVERRIDE_CARD opt_bktr.h 532OVERRIDE_TUNER opt_bktr.h 533OVERRIDE_DBX opt_bktr.h 534OVERRIDE_MSP opt_bktr.h 535BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 536BROOKTREE_ALLOC_PAGES opt_bktr.h 537BKTR_OVERRIDE_CARD opt_bktr.h 538BKTR_OVERRIDE_TUNER opt_bktr.h 539BKTR_OVERRIDE_DBX opt_bktr.h 540BKTR_OVERRIDE_MSP opt_bktr.h 541BKTR_SYSTEM_DEFAULT opt_bktr.h 542BKTR_ALLOC_PAGES opt_bktr.h 543BKTR_USE_PLL opt_bktr.h 544BKTR_GPIO_ACCESS opt_bktr.h 545BKTR_NO_MSP_RESET opt_bktr.h 546BKTR_430_FX_MODE opt_bktr.h 547BKTR_SIS_VIA_MODE opt_bktr.h 548BKTR_USE_FREEBSD_SMBUS opt_bktr.h 549BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 550 551# options for serial support 552COM_ESP opt_sio.h 553COM_MULTIPORT opt_sio.h 554BREAK_TO_DEBUGGER opt_comconsole.h 555ALT_BREAK_TO_DEBUGGER opt_comconsole.h 556 557# Options to support PPS 558UART_PPS_ON_CTS opt_uart.h 559 560# options for bus/device framework 561BUS_DEBUG opt_bus.h 562 563# options for USB support 564USB_DEBUG opt_usb.h 565USBVERBOSE opt_usb.h 566UKBD_DFLT_KEYMAP opt_ukbd.h 567UPLCOM_INTR_INTERVAL opt_uplcom.h 568UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 569UVSCOM_INTR_INTERVAL opt_uvscom.h 570 571# Vinum options 572VINUMDEBUG opt_vinum.h 573 574# Embedded system options 575INIT_PATH opt_init_path.h 576 577ROOTDEVNAME opt_rootdevname.h 578 579FDC_DEBUG opt_fdc.h 580PCFCLOCK_VERBOSE opt_pcfclock.h 581PCFCLOCK_MAX_RETRIES opt_pcfclock.h 582TDFX_LINUX opt_tdfx.h 583 584KTR opt_global.h 585KTR_ALQ opt_ktr.h 586KTR_MASK opt_ktr.h 587KTR_CPUMASK opt_ktr.h 588KTR_COMPILE opt_global.h 589KTR_ENTRIES opt_global.h 590KTR_VERBOSE opt_ktr.h 591WITNESS opt_global.h 592WITNESS_KDB opt_witness.h 593WITNESS_SKIPSPIN opt_witness.h 594 595# options for ACPI support 596ACPI_DEBUG opt_acpi.h 597ACPI_MAX_THREADS opt_acpi.h 598ACPI_NO_SEMAPHORES opt_acpi.h 599ACPICA_PEDANTIC opt_acpi.h 600 601# options for DEVFS, see sys/fs/devfs/devfs.h 602NDEVFSINO opt_devfs.h 603NDEVFSOVERFLOW opt_devfs.h 604 605# various 'device presence' options. 606DEV_BPF opt_bpf.h 607DEV_ISA opt_isa.h 608DEV_MCA opt_mca.h 609DEV_SPLASH opt_splash.h 610 611EISA_SLOTS opt_eisa.h 612 613# ed driver 614ED_NO_MIIBUS opt_ed.h 615 616# wi driver 617WI_SYMBOL_FIRMWARE opt_wi.h 618 619# XXX bogusly global. 620DEVICE_POLLING opt_global.h 621 622SOCKBUF_DEBUG opt_global.h 623 624# options for ubsec driver 625UBSEC_DEBUG opt_ubsec.h 626UBSEC_RNDTEST opt_ubsec.h 627UBSEC_NO_RNG opt_ubsec.h 628 629# options for hifn driver 630HIFN_DEBUG opt_hifn.h 631HIFN_RNDTEST opt_hifn.h 632 633# options for safenet driver 634SAFE_DEBUG opt_safe.h 635SAFE_NO_RNG opt_safe.h 636SAFE_RNDTEST opt_safe.h 637 638# syscons options 639MAXCONS opt_syscons.h 640SC_ALT_MOUSE_IMAGE opt_syscons.h 641SC_CUT_SPACES2TABS opt_syscons.h 642SC_CUT_SEPCHARS opt_syscons.h 643SC_DEBUG_LEVEL opt_syscons.h 644SC_DFLT_FONT opt_syscons.h 645SC_DISABLE_KDBKEY opt_syscons.h 646SC_DISABLE_REBOOT opt_syscons.h 647SC_HISTORY_SIZE opt_syscons.h 648SC_KERNEL_CONS_ATTR opt_syscons.h 649SC_KERNEL_CONS_REV_ATTR opt_syscons.h 650SC_MOUSE_CHAR opt_syscons.h 651SC_NO_CUTPASTE opt_syscons.h 652SC_NO_FONT_LOADING opt_syscons.h 653SC_NO_HISTORY opt_syscons.h 654SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 655SC_NO_SYSMOUSE opt_syscons.h 656SC_NORM_ATTR opt_syscons.h 657SC_NORM_REV_ATTR opt_syscons.h 658SC_PIXEL_MODE opt_syscons.h 659SC_RENDER_DEBUG opt_syscons.h 660SC_TWOBUTTON_MOUSE opt_syscons.h 661 662# kbd options 663KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 664KBD_INSTALL_CDEV opt_kbd.h 665KBD_MAXRETRY opt_kbd.h 666KBD_MAXWAIT opt_kbd.h 667KBD_RESETDELAY opt_kbd.h 668KBDIO_DEBUG opt_kbd.h 669 670# options for the Atheros HAL (only useful with source code) 671AH_SUPPORT_AR5210 opt_ah.h 672AH_SUPPORT_AR5211 opt_ah.h 673AH_SUPPORT_AR5212 opt_ah.h 674AH_DEBUG opt_ah.h 675AH_DEBUG_ALQ opt_ah.h 676AH_ASSERT opt_ah.h 677 678# dcons options 679DCONS_BUF_SIZE opt_dcons.h 680DCONS_POLL_HZ opt_dcons.h 681DCONS_FORCE_CONSOLE opt_dcons.h 682DCONS_FORCE_GDB opt_dcons.h 683 684# Static unit counts 685NI4BTRC opt_i4b.h 686NI4BRBCH opt_i4b.h 687NI4BTEL opt_i4b.h 688NI4BIPR opt_i4b.h 689NI4BING opt_i4b.h 690NI4BISPPP opt_i4b.h 691