options revision 113995
1# $FreeBSD: head/sys/conf/options 113995 2003-04-25 01:18:47Z anholt $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affect only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h # Debugging levels: 35 # 0 - quiet, only emit warnings 36 # 1 - noisy, emit major function 37 # points and things done 38 # 2 - extremely noisy, emit trace 39 # items in loops, etc. 40 41# Adaptec aic7xxx SCSI controller options 42AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 43 # mapped I/O 44 45AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 46 # targetmode operations. 47 48AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 49 # configuration prom. 50 51AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 52 53AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 54 # See sys/dev/aic7xxx/aic7xxx.h 55 56AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 57 # output. Adds ~128k to driver. 58 59# Adaptec aic79xx SCSI controller options 60AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 61 62AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 63 # See sys/dev/aic7xxx/aic79xx.h 64 65AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 66 # targetmode operations. 67 68AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 69 # output. Adds ~215k to driver. 70 71ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 72 # mapped I/O 73 74# Miscellaneous options. 75ADAPTIVE_MUTEXES 76ALQ 77COMPAT_43 opt_compat.h 78COMPAT_FREEBSD4 opt_compat.h 79COMPAT_SUNOS opt_compat.h 80COMPILING_LINT opt_global.h 81CONSPEED opt_comconsole.h 82CY_PCI_FASTINTR 83DDB 84DDB_NOKLDSYM opt_ddb.h 85DDB_TRACE 86DDB_UNATTENDED 87GDB_REMOTE_CHAT opt_ddb.h 88GDBSPEED opt_ddb.h 89GEOM_AES opt_geom.h 90GEOM_APPLE opt_geom.h 91GEOM_BDE opt_geom.h 92GEOM_BSD opt_geom.h 93GEOM_GPT opt_geom.h 94GEOM_MBR opt_geom.h 95GEOM_MIRROR opt_geom.h 96GEOM_PC98 opt_geom.h 97GEOM_SUNLABEL opt_geom.h 98GEOM_VOL opt_geom.h 99HW_WDOG 100KSTACK_PAGES 101KSTACK_MAX_PAGES 102KTRACE 103KTRACE_REQUEST_POOL opt_ktrace.h 104LIBICONV 105MAC 106MAC_ALWAYS_LABEL_MBUF opt_mac.h 107MAC_BIBA opt_dontuse.h 108MAC_BSDEXTENDED opt_dontuse.h 109MAC_DEBUG opt_mac.h 110MAC_IFOFF opt_dontuse.h 111MAC_LOMAC opt_dontuse.h 112MAC_MLS opt_dontuse.h 113MAC_NONE opt_dontuse.h 114MAC_PARTITION opt_dontuse.h 115MAC_PORTACL opt_dontuse.h 116MAC_SEEOTHERUIDS opt_dontuse.h 117MAC_TEST opt_dontuse.h 118MD_ROOT opt_md.h 119MD_ROOT_SIZE opt_md.h 120NDGBPORTS opt_dgb.h 121NSWAPDEV opt_swap.h 122NSWBUF_MIN opt_swap.h 123NTIMECOUNTER opt_ntp.h 124PANIC_REBOOT_WAIT_TIME opt_panic.h 125PPS_SYNC opt_ntp.h 126PUC_FASTINTR opt_puc.h 127QUOTA 128SCHED_4BSD opt_sched.h 129SCHED_ULE opt_sched.h 130SHOW_BUSYBUFS 131SPX_HACK 132SUIDDIR opt_suiddir.h 133MSGMNB opt_sysvipc.h 134MSGMNI opt_sysvipc.h 135MSGSEG opt_sysvipc.h 136MSGSSZ opt_sysvipc.h 137MSGTQL opt_sysvipc.h 138SEMMAP opt_sysvipc.h 139SEMMNI opt_sysvipc.h 140SEMMNS opt_sysvipc.h 141SEMMNU opt_sysvipc.h 142SEMMSL opt_sysvipc.h 143SEMOPM opt_sysvipc.h 144SEMUME opt_sysvipc.h 145SHMALL opt_sysvipc.h 146SHMMAX opt_sysvipc.h 147SHMMAXPGS opt_sysvipc.h 148SHMMIN opt_sysvipc.h 149SHMMNI opt_sysvipc.h 150SHMSEG opt_sysvipc.h 151SYSVMSG opt_sysvipc.h 152SYSVSEM opt_sysvipc.h 153SYSVSHM opt_sysvipc.h 154VFS_AIO 155WLCACHE opt_wavelan.h 156WLDEBUG opt_wavelan.h 157TTYHOG opt_tty.h 158DIRECTIO opt_directio.h 159 160# POSIX kernel options 161_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 162P1003_1B_SEMAPHORES opt_posix.h 163 164# Do we want the config file compiled into the kernel? 165INCLUDE_CONFIG_FILE opt_config.h 166 167# Options for static filesystems. These should only be used at config 168# time, since the corresponding lkms cannot work if there are any static 169# dependencies. Unusability is enforced by hiding the defines for the 170# options in a never-included header. 171CD9660 opt_dontuse.h 172CODA opt_dontuse.h 173EXT2FS opt_dontuse.h 174FDESCFS opt_dontuse.h 175HPFS opt_dontuse.h 176LINPROCFS opt_dontuse.h 177MSDOSFS opt_dontuse.h 178NTFS opt_dontuse.h 179NULLFS opt_dontuse.h 180NWFS opt_dontuse.h 181PORTALFS opt_dontuse.h 182PROCFS opt_dontuse.h 183PSEUDOFS opt_dontuse.h 184SMBFS opt_dontuse.h 185UDF opt_dontuse.h 186UMAPFS opt_dontuse.h 187UNIONFS opt_dontuse.h 188 189# Broken - ffs_snapshot() dependency from ufs_lookup() :-( 190FFS opt_ffs_broken_fixme.h 191 192# These static filesystems have one slightly bogus static dependency in 193# sys/i386/i386/autoconf.c. If any of these filesystems are 194# statically compiled into the kernel, code for mounting them as root 195# filesystems will be enabled - but look below. 196NFSCLIENT opt_nfs.h 197NFSSERVER opt_nfs.h 198 199# If you are following the conditions in the copyright, 200# you can enable soft-updates which will speed up a lot of thigs 201# and make the system safer from crashes at the same time. 202# otherwise a STUB module will be compiled in. 203SOFTUPDATES opt_ffs.h 204 205# Enabling this option turns on support for Access Control Lists in UFS, 206# which can be used to support high security configurations. Depends on 207# UFS_EXTATTR. 208UFS_ACL opt_ufs.h 209 210# Enabling this option turns on support for extended attributes in UFS-based 211# filesystems, which can be used to support high security configurations 212# as well as new filesystem features. 213UFS_EXTATTR opt_ufs.h 214UFS_EXTATTR_AUTOSTART opt_ufs.h 215 216# Enable fast hash lookups for large directories on UFS-based filesystems. 217UFS_DIRHASH opt_ufs.h 218 219# The below sentence is not in English, and neither is this one. 220# We plan to remove the static dependences above, with a 221# <filesystem>_ROOT option to control if it usable as root. This list 222# allows these options to be present in config files already (though 223# they won't make any difference yet). 224NFS_ROOT opt_nfsroot.h 225 226# SMB/CIFS requester 227NETSMB opt_netsmb.h 228NETSMBCRYPTO opt_netsmb.h 229 230# Options used only in subr_param.c. 231HZ opt_param.h 232MAXFILES opt_param.h 233NBUF opt_param.h 234NMBCLUSTERS opt_param.h 235NSFBUFS opt_param.h 236VM_BCACHE_SIZE_MAX opt_param.h 237VM_SWZONE_SIZE_MAX opt_param.h 238MAXUSERS 239DFLDSIZ opt_param.h 240MAXDSIZ opt_param.h 241MAXSSIZ opt_param.h 242 243# Generic SCSI options. 244CAM_MAX_HIGHPOWER opt_cam.h 245CAMDEBUG opt_cam.h 246CAM_DEBUG_DELAY opt_cam.h 247CAM_DEBUG_BUS opt_cam.h 248CAM_DEBUG_TARGET opt_cam.h 249CAM_DEBUG_LUN opt_cam.h 250CAM_DEBUG_FLAGS opt_cam.h 251CAM_NEW_TRAN_CODE opt_cam.h 252SCSI_DELAY opt_scsi.h 253SCSI_NO_SENSE_STRINGS opt_scsi.h 254SCSI_NO_OP_STRINGS opt_scsi.h 255 256# Options used only in cam/scsi/scsi_cd.c 257CHANGER_MIN_BUSY_SECONDS opt_cd.h 258CHANGER_MAX_BUSY_SECONDS opt_cd.h 259 260# Options used only in cam/scsi/scsi_sa.c. 261SA_IO_TIMEOUT opt_sa.h 262SA_SPACE_TIMEOUT opt_sa.h 263SA_REWIND_TIMEOUT opt_sa.h 264SA_ERASE_TIMEOUT opt_sa.h 265SA_1FM_AT_EOD opt_sa.h 266 267# Options used only in cam/scsi/scsi_pt.c 268SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 269 270# Options used only in cam/scsi/scsi_ses.c 271SES_ENABLE_PASSTHROUGH opt_ses.h 272 273# Options used in dev/sym/ (Symbios SCSI driver). 274SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 275 # Allows the ncr to take precedence 276 # 1 (1<<0) -> 810a, 860 277 # 2 (1<<1) -> 825a, 875, 885, 895 278 # 4 (1<<2) -> 895a, 896, 1510d 279SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 280 # disabled:0 (default), enabled:1 281SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 282 # disabled:0, enabled:1 (default) 283SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 284 # default:8, range:[1..64] 285 286# Options used only in pci/ncr.c 287SCSI_NCR_DEBUG opt_ncr.h 288SCSI_NCR_MAX_SYNC opt_ncr.h 289SCSI_NCR_MAX_WIDE opt_ncr.h 290SCSI_NCR_MYADDR opt_ncr.h 291 292# Options used only in dev/isp/* 293ISP_TARGET_MODE opt_isp.h 294ISP_FW_CRASH_DUMP opt_isp.h 295 296# Options used in the 'ata' ATA/ATAPI driver 297ACD_DEBUG opt_ata.h 298AST_DEBUG opt_ata.h 299ATAPI_DEBUG opt_ata.h 300ATA_DEBUG opt_ata.h 301ATA_STATIC_ID opt_ata.h 302ATA_NOPCI opt_ata.h 303DEV_ATADISK opt_ata.h 304DEV_ATAPICD opt_ata.h 305DEV_ATAPIST opt_ata.h 306DEV_ATAPIFD opt_ata.h 307DEV_ATAPICAM opt_ata.h 308 309# Net stuff. 310ACCEPT_FILTER_DATA 311ACCEPT_FILTER_HTTP 312BOOTP opt_bootp.h 313BOOTP_COMPAT opt_bootp.h 314BOOTP_NFSROOT opt_bootp.h 315BOOTP_NFSV3 opt_bootp.h 316BOOTP_WIRED_TO opt_bootp.h 317BRIDGE opt_bdg.h 318ETHER_II opt_ef.h 319ETHER_8023 opt_ef.h 320ETHER_8022 opt_ef.h 321ETHER_SNAP opt_ef.h 322MROUTING opt_mrouting.h 323INET opt_inet.h 324INET6 opt_inet6.h 325IPSEC opt_ipsec.h 326IPSEC_ESP opt_ipsec.h 327IPSEC_DEBUG opt_ipsec.h 328IPSEC_FILTERGIF opt_ipsec.h 329FAST_IPSEC opt_ipsec.h 330IPDIVERT 331DUMMYNET opt_ipdn.h 332IPFILTER opt_ipfilter.h 333IPFILTER_LOG opt_ipfilter.h 334IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 335PFIL_HOOKS opt_pfil_hooks.h 336IPFIREWALL opt_ipfw.h 337IPFIREWALL_VERBOSE opt_ipfw.h 338IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 339IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 340IPFIREWALL_FORWARD opt_ipfw.h 341IPV6FIREWALL opt_ip6fw.h 342IPV6FIREWALL_VERBOSE opt_ip6fw.h 343IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 344IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 345IPSTEALTH 346IPX 347IPXIP opt_ipx.h 348LIBMCHAIN 349NCP 350NETATALK opt_atalk.h 351PPP_BSDCOMP opt_ppp.h 352PPP_DEFLATE opt_ppp.h 353PPP_FILTER opt_ppp.h 354RANDOM_IP_ID 355SLIP_IFF_OPTS opt_slip.h 356TCPDEBUG 357TCP_DROP_SYNFIN opt_tcp_input.h 358XBONEHACK 359MBUF_STRESS_TEST opt_mbuf_stress_test.h 360 361# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 362# Each netgraph node type can be either be compiled into the kernel 363# or loaded dynamically. To get the former, include the corresponding 364# option below. Each type has its own man page, e.g. ng_async(4). 365NETGRAPH 366NETGRAPH_ASYNC opt_netgraph.h 367NETGRAPH_BPF opt_netgraph.h 368NETGRAPH_BRIDGE opt_netgraph.h 369NETGRAPH_CISCO opt_netgraph.h 370NETGRAPH_ECHO opt_netgraph.h 371NETGRAPH_ETHER opt_netgraph.h 372NETGRAPH_FRAME_RELAY opt_netgraph.h 373NETGRAPH_GIF opt_netgraph.h 374NETGRAPH_GIF_DEMUX opt_netgraph.h 375NETGRAPH_HOLE opt_netgraph.h 376NETGRAPH_IFACE opt_netgraph.h 377NETGRAPH_IP_INPUT opt_netgraph.h 378NETGRAPH_KSOCKET opt_netgraph.h 379NETGRAPH_L2TP opt_netgraph.h 380NETGRAPH_LMI opt_netgraph.h 381# MPPC compression requires proprietary files (not included) 382NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 383NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 384NETGRAPH_ONE2MANY opt_netgraph.h 385NETGRAPH_PPP opt_netgraph.h 386NETGRAPH_PPPOE opt_netgraph.h 387NETGRAPH_PPTPGRE opt_netgraph.h 388NETGRAPH_RFC1490 opt_netgraph.h 389NETGRAPH_SOCKET opt_netgraph.h 390NETGRAPH_SPLIT opt_netgraph.h 391NETGRAPH_TEE opt_netgraph.h 392NETGRAPH_TTY opt_netgraph.h 393NETGRAPH_UI opt_netgraph.h 394NETGRAPH_VJC opt_netgraph.h 395 396# DRM options 397DRM_DEBUG opt_drm.h 398 399ZERO_COPY_SOCKETS opt_zero.h 400TI_PRIVATE_JUMBOS opt_ti.h 401TI_JUMBO_HDRSPLIT opt_ti.h 402 403# ATM (HARP version) 404ATM_CORE opt_atm.h 405ATM_IP opt_atm.h 406ATM_SIGPVC opt_atm.h 407ATM_SPANS opt_atm.h 408ATM_UNI opt_atm.h 409 410# XXX Conflict: # of devices vs network protocol (Native ATM). 411# This makes "atm.h" unusable. 412NATM 413 414DPT_ALLOW_MEMIO opt_dpt.h # Allow PCI devices to use memory 415 # mapped I/O 416# DPT driver debug flags 417DPT_MEASURE_PERFORMANCE opt_dpt.h 418DPT_HANDLE_TIMEOUTS opt_dpt.h 419DPT_TIMEOUT_FACTOR opt_dpt.h 420DPT_LOST_IRQ opt_dpt.h 421DPT_RESET_HBA opt_dpt.h 422 423# Adaptec ASR and DPT V/VI controller options 424ASR_MEASURE_PERFORMANCE opt_asr.h 425 426# Misc debug flags. Most of these should probably be replaced with 427# 'DEBUG', and then let people recompile just the interesting modules 428# with 'make CC="cc -DDEBUG"'. 429CLUSTERDEBUG opt_debug_cluster.h 430DEBUG_1284 opt_ppb_1284.h 431VP0_DEBUG opt_vpo.h 432LPT_DEBUG opt_lpt.h 433PLIP_DEBUG opt_plip.h 434LOCKF_DEBUG opt_debug_lockf.h 435MUTEX_DEBUG opt_global.h 436MUTEX_PROFILING opt_global.h 437NPX_DEBUG opt_debug_npx.h 438NETATALKDEBUG opt_atalk.h 439SI_DEBUG opt_debug_si.h 440 441# Fb options 442FB_DEBUG opt_fb.h 443FB_INSTALL_CDEV opt_fb.h 444 445# ppbus related options 446PERIPH_1284 opt_ppb_1284.h 447DONTPROBE_1284 opt_ppb_1284.h 448 449# smbus related options 450ENABLE_ALART opt_intpm.h 451 452# These cause changes all over the kernel 453BLKDEV_IOSIZE opt_global.h 454DEBUG opt_global.h 455DEBUG_LOCKS opt_global.h 456DEBUG_VFS_LOCKS opt_global.h 457DIAGNOSTIC opt_global.h 458INVARIANT_SUPPORT opt_global.h 459INVARIANTS opt_global.h 460LOOKUP_SHARED opt_global.h 461MCLSHIFT opt_global.h 462MSIZE opt_global.h 463REGRESSION opt_global.h 464RESTARTABLE_PANICS opt_global.h 465VFS_BIO_DEBUG opt_global.h 466 467# These are VM related options 468VM_KMEM_SIZE opt_vm.h 469VM_KMEM_SIZE_SCALE opt_vm.h 470VM_KMEM_SIZE_MAX opt_vm.h 471NO_SWAPPING opt_vm.h 472MALLOC_MAKE_FAILURES opt_vm.h 473MALLOC_PROFILE opt_vm.h 474PQ_NOOPT opt_vmpage.h 475PQ_NORMALCACHE opt_vmpage.h 476PQ_MEDIUMCACHE opt_vmpage.h 477PQ_LARGECACHE opt_vmpage.h 478PQ_HUGECACHE opt_vmpage.h 479PQ_CACHESIZE opt_vmpage.h 480 481# Standard SMP options 482SMP opt_global.h 483 484# Size of the kernel message buffer 485MSGBUF_SIZE opt_msgbuf.h 486 487# NFS options 488NFS_MINATTRTIMO opt_nfs.h 489NFS_MAXATTRTIMO opt_nfs.h 490NFS_MINDIRATTRTIMO opt_nfs.h 491NFS_MAXDIRATTRTIMO opt_nfs.h 492NFS_GATHERDELAY opt_nfs.h 493NFS_WDELAYHASHSIZ opt_nfs.h 494NFS_DEBUG opt_nfs.h 495 496# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 497OVERRIDE_CARD opt_bktr.h 498OVERRIDE_TUNER opt_bktr.h 499OVERRIDE_DBX opt_bktr.h 500OVERRIDE_MSP opt_bktr.h 501BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 502BROOKTREE_ALLOC_PAGES opt_bktr.h 503BKTR_OVERRIDE_CARD opt_bktr.h 504BKTR_OVERRIDE_TUNER opt_bktr.h 505BKTR_OVERRIDE_DBX opt_bktr.h 506BKTR_OVERRIDE_MSP opt_bktr.h 507BKTR_SYSTEM_DEFAULT opt_bktr.h 508BKTR_ALLOC_PAGES opt_bktr.h 509BKTR_USE_PLL opt_bktr.h 510BKTR_GPIO_ACCESS opt_bktr.h 511BKTR_NO_MSP_RESET opt_bktr.h 512BKTR_430_FX_MODE opt_bktr.h 513BKTR_SIS_VIA_MODE opt_bktr.h 514BKTR_USE_FREEBSD_SMBUS opt_bktr.h 515 516# meteor opt_meteor.h 517METEOR_ALLOC_PAGES opt_meteor.h 518METEOR_TEST_VIDEO opt_meteor.h 519METEOR_SYSTEM_DEFAULT opt_meteor.h 520METEOR_DEALLOC_PAGES opt_meteor.h 521METEOR_DEALLOC_ABOVE opt_meteor.h 522 523# options for serial support 524COM_ESP opt_sio.h 525COM_MULTIPORT opt_sio.h 526BREAK_TO_DEBUGGER opt_comconsole.h 527ALT_BREAK_TO_DEBUGGER opt_comconsole.h 528 529# options for bus/device framework 530BUS_DEBUG opt_bus.h 531 532# options for USB support 533UHCI_DEBUG opt_usb.h 534OHCI_DEBUG opt_usb.h 535USB_DEBUG opt_usb.h 536UGEN_DEBUG opt_usb.h 537UHID_DEBUG opt_usb.h 538UHUB_DEBUG opt_usb.h 539UKBD_DEBUG opt_usb.h 540ULPT_DEBUG opt_usb.h 541UMASS_DEBUG opt_usb.h 542UMS_DEBUG opt_usb.h 543URIO_DEBUG opt_usb.h 544UKBD_DFLT_KEYMAP opt_ukbd.h 545UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 546 547# Vinum options 548VINUMDEBUG opt_vinum.h 549VINUM_AUTOSTART opt_vinum.h 550 551# Embedded system options 552INIT_PATH opt_init_path.h 553 554ROOTDEVNAME opt_rootdevname.h 555 556FDC_DEBUG opt_fdc.h 557PCFCLOCK_VERBOSE opt_pcfclock.h 558PCFCLOCK_MAX_RETRIES opt_pcfclock.h 559TDFX_LINUX opt_tdfx.h 560 561# RAIDframe options 562RAID_AUTOCONFIG opt_raid.h 563RAID_DEBUG opt_raid.h 564 565KTR opt_global.h 566KTR_ALQ opt_ktr.h 567KTR_MASK opt_ktr.h 568KTR_CPUMASK opt_ktr.h 569KTR_COMPILE opt_global.h 570KTR_ENTRIES opt_global.h 571KTR_VERBOSE opt_ktr.h 572WITNESS opt_global.h 573WITNESS_DDB opt_witness.h 574WITNESS_SKIPSPIN opt_witness.h 575 576# options for ACPI support 577ACPI_DEBUG opt_acpi.h 578ACPI_NO_SEMAPHORES opt_acpi.h 579ACPI_MAX_THREADS opt_acpi.h 580 581# options for DEVFS, see sys/fs/devfs/devfs.h 582NDEVFSINO opt_devfs.h 583NDEVFSOVERFLOW opt_devfs.h 584 585# various 'device presence' options. 586DEV_ISA opt_isa.h 587DEV_MCA opt_mca.h 588DEV_BPF opt_bpf.h 589 590# ed driver 591ED_NO_MIIBUS opt_ed.h 592 593# wi driver 594WI_SYMBOL_FIRMWARE opt_wi.h 595 596# XXX bogusly global. 597DEVICE_POLLING opt_global.h 598# options for ubsec driver 599UBSEC_DEBUG opt_ubsec.h 600UBSEC_RNDTEST opt_ubsec.h 601 602# options for hifn driver 603HIFN_DEBUG opt_hifn.h 604HIFN_RNDTEST opt_hifn.h 605