xref: /freebsd-10.2-release/sys/conf/Makefile.pc98

# Makefile for FreeBSD(98) after:
#
# Makefile.i386 -- with config changes.
# Copyright 1990 W. Jolitz
#	from: @(#)Makefile.i386	7.1 5/10/91
#	$Id: Makefile.pc98,v 1.12 1997/03/22 18:54:10 kato Exp $
#
# Makefile for FreeBSD
#
# This makefile is constructed from a machine description:
#	config machineid
# Most changes should be made in the machine description
#	/sys/i386/conf/``machineid''
# after which you should do
#	 config machineid
# Generic makefile changes should be made in
#	/sys/i386/conf/Makefile.i386
# after which config should be rerun for all machines.
#

BINFORMAT?=	aout
#BINFORMAT?=	elf

.if exists(./@/.)
S=	./@
.else
S=	../..
.endif
PC98=	${S}/pc98
I386=	${S}/i386

COPTFLAGS?=-O
INCLUDES= -nostdinc -I- -I. -I$S
# This hack is to allow kernel compiles to succeed on machines w/out srcdist
.if exists($S/../include)
INCLUDES+= -I$S/../include
.else
INCLUDES+= -I/usr/include
.endif
COPTS=	${INCLUDES} ${IDENT} -DKERNEL
CFLAGS=	${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS}
LOAD_ADDRESS?=	F0100000
.if defined(PROF)
PROF+=	-malign-functions=4
.if ${PROFLEVEL} >= 2
IDENT+=	-DGPROF4 -DGUPROF
PROF+=	-mprofiler-epilogue
.endif
.endif

NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<
# XXX LOCORE means "don't declare C stuff" not "for locore.s".
NORMAL_S= ${CC} -c -x assembler-with-cpp -DLOCORE ${COPTS} $<
DRIVER_C= ${CC} -c ${CFLAGS} ${PROF} $<
DRIVER_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<
DRIVER_S= ${CC} -c -x assembler-with-cpp -DLOCORE ${COPTS} $<
PROFILE_C= ${CC} -c ${CFLAGS} ${PARAM} $<

SYSTEM_CFILES= ${I386}/i386/setdef0.c ioconf.c param.c vnode_if.c config.c \
	${I386}/i386/setdef1.c
SYSTEM_SFILES= ${I386}/i386/locore.s
SYSTEM_OBJS= locore.o setdef0.o vnode_if.o ${OBJS} ioconf.o param.o config.o \
	setdef1.o
SYSTEM_DEP= Makefile symbols.exclude symbols.sort ${SYSTEM_OBJS}
.if ${CFLAGS:M-g} == ""
SYMORDER_EXCLUDE=-x symbols.exclude
.endif
SYSTEM_LD_HEAD= @echo loading $@; rm -f $@
.if ${BINFORMAT} == aout
SYSTEM_LD= @${LD} -Bstatic -Z -T ${LOAD_ADDRESS} -o $@ -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @echo rearranging symbols; \
	symorder -m ${SYMORDER_EXCLUDE} symbols.sort $@; \
	size $@; chmod 755 $@
.endif
.if ${BINFORMAT} == elf
SYSTEM_LD= @${LD} -Bstatic -Ttext ${LOAD_ADDRESS} -e btext -o $@ -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @size $@; chmod 755 $@
.endif

%BEFORE_DEPEND

%OBJS

%CFILES

%SFILES

%LOAD

%CLEAN

clean:
	rm -f *.o *.s eddep errs genassym kernel linterrs \
	      makelinks param.c symbols.exclude symbols.sort tags \
	      vers.c vnode_if.c vnode_if.h ${CLEAN}

#lint: /tmp param.c
#	@lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} \
#	  ${I386}/i386/Locore.c ${CFILES} ioconf.c param.c | \
#	    grep -v 'struct/union .* never defined' | \
#	    grep -v 'possible pointer alignment problem'

symbols.exclude: Makefile
	echo "gcc2_compiled." >symbols.exclude
	echo "___gnu_compiled_c" >>symbols.exclude

symbols.sort: ${I386}/i386/symbols.raw
	grep -v '^#' ${I386}/i386/symbols.raw \
	    | sed 's/^	//' | sort -u > symbols.sort

locore.o: ${I386}/i386/locore.s assym.s
	${NORMAL_S}

setdef0.o: ${I386}/i386/setdef0.c
	${NORMAL_C}

setdef1.o: ${I386}/i386/setdef1.c
	${NORMAL_C}

# everything potentially depends on the Makefile since everything potentially
# depends on the options.  Some things are more dependent on the Makefile for
# historical reasons.
machdep.o: Makefile

# the following is necessary because autoconf.o depends on #if GENERIC
autoconf.o: Makefile

# XXX - may no longer be needed
locore.o: Makefile

# depends on KDB (cons.o also depends on GENERIC)
trap.o cons.o: Makefile

# this rule stops ./assym.s in .depend from causing problems
./assym.s: assym.s

assym.s: genassym
	./genassym >assym.s

# Some of the defines that genassym outputs may well depend on the
# value of kernel options.
genassym.o: ${I386}/i386/genassym.c Makefile
	rm -f ./machine ; ln -s ${I386}/include ./machine
	${CC} -c ${CFLAGS} ${PARAM} -UKERNEL ${I386}/i386/genassym.c

genassym: genassym.o
	${CC} ${CFLAGS} ${PARAM} genassym.o -o $@

# XXX this assumes that the options for NORMAL_C* and DRIVER_C* are identical.
depend: assym.s param.c vnode_if.h ${BEFORE_DEPEND}
	rm -f .newdep
	mkdep -a -f .newdep ${COPTS} ${CFILES} ${SYSTEM_CFILES}
	mkdep -a -f .newdep ${COPTS} ${PARAM} -UKERNEL ${I386}/i386/genassym.c
	MKDEP_CPP="${CC} -E -x assembler-with-cpp" ; export MKDEP_CPP ; \
	mkdep -a -f .newdep -DLOCORE ${COPTS} ${SFILES} ${SYSTEM_SFILES}
	rm -f .depend
	mv -f .newdep .depend

links:
	egrep '#if' ${CFILES:Nswapkernel.c} | sed -f $S/conf/defines | \
	  sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
	echo ${CFILES:Nswapkernel.c} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
	  sort -u | comm -23 - dontlink | \
	  sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
	sh makelinks && rm -f dontlink

tags:
	@echo "see $S/kern/Makefile for tags"

install:
	@if [ ! -f kernel ] ; then \
		echo "You must first build your kernel before trying to install." ; \
		exit 1 ; \
	fi
	chflags noschg /kernel
	mv /kernel /kernel.old
	if [ `/usr/sbin/sysctl -n kern.bootfile` = /kernel ] ; then \
		/usr/sbin/sysctl -w kern.bootfile=/kernel.old ; \
		mv -f /var/db/kvm_kernel.db /var/db/kvm_kernel.old.db ; \
	fi
	install -c -m 555 -o root -g wheel -fschg kernel /

ioconf.o: ioconf.c $S/sys/param.h $S/sys/buf.h \
    ${I386}/isa/isa_device.h ${PC98}/pc98/pc98.h ${I386}/isa/icu.h
	${CC} -c ${CFLAGS} ioconf.c

param.c: $S/conf/param.c
	-rm -f param.c
	cp $S/conf/param.c .

param.o: param.c Makefile
	${CC} -c ${CFLAGS} ${PARAM} param.c

vers.o: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP}
	sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT}
	${CC} ${CFLAGS} -c vers.c

vnode_if.c: $S/kern/vnode_if.sh $S/kern/vnode_if.src
	sh $S/kern/vnode_if.sh $S/kern/vnode_if.src
vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src
	sh $S/kern/vnode_if.sh $S/kern/vnode_if.src

.include <bsd.kern.mk>

%RULES

# DO NOT DELETE THIS LINE -- make depend uses it