loader.conf revision 256281
1# This is loader.conf - a file full of useful variables that you can 2# set to change the default load behavior of your system. You should 3# not edit this file! Put any overrides into one of the 4# loader_conf_files instead and you will be able to update these 5# defaults later without spamming your local configuration information. 6# 7# All arguments must be in double quotes. 8# 9# $FreeBSD: stable/10/sys/boot/forth/loader.conf 253071 2013-07-09 08:40:05Z avg $ 10 11############################################################## 12### Basic configuration options ############################ 13############################################################## 14 15exec=".( Loading /boot/defaults/loader.conf ) cr" 16 17kernel="kernel" # /boot sub-directory containing kernel and modules 18bootfile="kernel" # Kernel name (possibly absolute path) 19kernel_options="" # Flags to be passed to the kernel 20 21loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local" 22nextboot_conf="/boot/nextboot.conf" 23nextboot_enable="NO" 24 25verbose_loading="NO" # Set to YES for verbose loader output 26 27 28############################################################## 29### Splash screen configuration ############################ 30############################################################## 31 32splash_bmp_load="NO" # Set this to YES for bmp splash screen! 33splash_pcx_load="NO" # Set this to YES for pcx splash screen! 34splash_txt_load="NO" # Set this to YES for TheDraw splash screen! 35vesa_load="NO" # Set this to YES to load the vesa module 36bitmap_load="NO" # Set this to YES if you want splash screen! 37bitmap_name="splash.bmp" # Set this to the name of the file 38bitmap_type="splash_image_data" # and place it on the module_path 39 40 41############################################################## 42### Loader settings ######################################## 43############################################################## 44 45#autoboot_delay="10" # Delay in seconds before autobooting, 46 # set to -1 if you don't want user to be 47 # allowed to interrupt autoboot process and 48 # escape to the loader prompt, set to 49 # "NO" to disable autobooting 50#beastie_disable="NO" # Turn the beastie boot menu on and off 51#loader_logo="orbbw" # Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none 52#comconsole_speed="9600" # Set the current serial console speed 53#console="vidconsole" # A comma separated list of console(s) 54#currdev="disk1s1a" # Set the current device 55module_path="/boot/modules" # Set the module search path 56#prompt="\\${interpret}" # Set the command prompt 57#root_disk_unit="0" # Force the root disk unit number 58#rootdev="disk1s1a" # Set the root filesystem 59#tftp.blksize="1428" # Set the RFC 2348 TFTP block size. 60 # If the TFTP server does not support RFC 2348, 61 # the block size is set to 512. If the value 62 # is out of range ( < 8 || > 9008 ) an error is 63 # returned. 64 65 66############################################################## 67### Kernel settings ######################################## 68############################################################## 69 70# The following boot_ variables are enabled by setting them to any value. 71# Their presence in the kernel environment (see kenv(1)) has the same 72# effect as setting the given boot flag (see boot(8)). 73 74#boot_askname="" # -a: Prompt the user for the name of the root device 75#boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM 76#boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger 77#boot_dfltroot="" # -r: Use the statically configured root file system 78#boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger 79#boot_multicons="" # -D: Use multiple consoles 80#boot_mute="" # -m: Mute the console 81#boot_pause="" # -p: Pause after each line during device probing 82#boot_serial="" # -h: Use serial console 83#boot_single="" # -s: Start system in single-user mode 84#boot_verbose="" # -v: Causes extra debugging information to be printed 85#init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init" 86 # Sets the list of init candidates 87#init_shell="/bin/sh" # The shell binary used by init(8). 88#init_script="" # Initial script to run by init(8) before chrooting. 89#init_chroot="" # Directory for init(8) to chroot into. 90 91 92############################################################## 93### Kernel tunables ######################################## 94############################################################## 95 96#hw.physmem="1G" # Limit physical memory. See loader(8) 97#kern.dfldsiz="" # Set the initial data size limit 98#kern.dflssiz="" # Set the initial stack size limit 99#kern.hz="100" # Set the kernel interval timer rate 100#kern.maxbcache="" # Set the max buffer cache KVA storage 101#kern.maxdsiz="" # Set the max data size 102#kern.maxfiles="" # Set the sys. wide open files limit 103#kern.maxproc="" # Set the maximum # of processes 104#kern.maxssiz="" # Set the max stack size 105#kern.maxswzone="" # Set the max swmeta KVA storage 106#kern.maxtsiz="" # Set the max text size 107#kern.maxusers="32" # Set size of various static tables 108#kern.msgbufsize="65536" # Set size of kernel message buffer 109#kern.nbuf="" # Set the number of buffer headers 110#kern.ncallout="" # Set the maximum # of timer events 111#kern.ngroups="1023" # Set the maximum # of supplemental groups 112#kern.sgrowsiz="" # Set the amount to grow stack 113#kern.cam.boot_delay="10000" # Delay (in ms) of root mount for CAM bus 114 # registration, useful for USB sticks as root 115#kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI 116#kern.ipc.maxsockets="" # Set the maximum number of sockets avaliable 117#kern.ipc.nmbclusters="" # Set the number of mbuf clusters 118#kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs 119#net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE 120#vfs.root.mountfrom="" # Specify root partition in a way the 121 # kernel understands 122#vm.kmem_size="" # Sets the size of kernel memory (bytes) 123#debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on 124#debug.ktr.mask="0x1200" # Bitmask of KTR events to enable 125#debug.ktr.verbose="1" # Enable console dump of KTR events 126#net.graph.maxalloc="128" # Maximum number of queue items to allocate 127 128 129############################################################## 130### ATA modules ############################################## 131############################################################## 132 133ataahci_load="NO" # AHCI SATA 134ataacard_load="NO" # ACARD 135ataacerlabs_load="NO" # Acer Labs Inc. (ALI) 136ataadaptec_load="NO" # Adaptec 137ataamd_load="NO" # American Micro Devices (AMD) 138ataati_load="NO" # ATI 139atacenatek_load="NO" # Cenatek 140atacypress_load="NO" # Cypress 141atacyrix_load="NO" # Cyrix 142atahighpoint_load="NO" # HighPoint 143ataintel_load="NO" # Intel 144ataite_load="NO" # Integrated Technology Inc. (ITE) 145atajmicron_load="NO" # JMicron 146atamarvell_load="NO" # Marvell 147atamicron_load="NO" # Micron 148atanational_load="NO" # National 149atanetcell_load="NO" # NetCell 150atanvidia_load="NO" # nVidia 151atapromise_load="NO" # Promise 152ataserverworks_load="NO" # ServerWorks 153atasiliconimage_load="NO" # Silicon Image Inc. (SiI) (formerly CMD) 154atasis_load="NO" # Silicon Integrated Systems Corp.(SiS) 155atavia_load="NO" # VIA Technologies Inc. 156 157 158############################################################## 159### Filesystem and related modules ######################### 160############################################################## 161 162# Filesystems 163 164cd9660_load="NO" # ISO 9660 filesystem 165fdescfs_load="NO" # Filedescriptors filesystem 166linprocfs_load="NO" # Linux compatibility process filesystem 167linsysfs_load="NO" # Linux compatibility system filesystem 168msdosfs_load="NO" # FAT-12/16/32 169nfsclient_load="NO" # NFS client 170nfsserver_load="NO" # NFS server 171nullfs_load="NO" # Null filesystem 172procfs_load="NO" # Process filesystem 173reiserfs_load="NO" # ReiserFS 174unionfs_load="NO" # Union filesystem 175zfs_load="NO" # ZFS 176 177# Related stuff 178 179geom_bde_load="NO" # Disk encryption driver (see gbde(4,8)) 180geom_ccd_load="NO" # Concatenated disk driver (see ccd(4), 181 # ccdconfig(8)) 182geom_concat_load="NO" # Concatenated disk driver (see gconcat(8)) 183geom_eli_load="NO" # Disk encryption driver (see geli(8)) 184geom_gate_load="NO" # Userland disk driver (see geom_gate(4), 185 # ggatec(8), ggated(8), ggatel(8)) 186geom_journal_load="NO" # Journaled filesystem driver (see gjournal(8)) 187geom_label_load="NO" # File system labels (see glabel(8)) 188geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see 189 # md(4), mdconfig(8)) 190geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8)) 191geom_mountver_load="NO" # Mount verification disk driver 192geom_nop_load="NO" # Transparent disk driver (see gnop(8)) 193geom_raid3_load="NO" # RAID3 disk driver (see graid3(8)) 194geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8)) 195geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8)) 196geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8)) 197geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4)) 198 199 200############################################################## 201### FireWire modules ####################################### 202############################################################## 203 204firewire_load="NO" # IEEE1394 High-performance Serial Bus 205fwe_load="NO" # Ethernet emulation driver for FireWire 206fwip_load="NO" # IP over FireWire driver 207fwohci_load="NO" # OHCI FireWire chipset device driver 208sbp_load="NO" # SBP-2 Mass Storage Devices driver 209sbp_targ_load="NO" # SBP-2 Target mode 210 211 212############################################################## 213### Screen saver modules ################################### 214############################################################## 215 216# This is best done in rc.conf 217 218screensave_load="NO" # Set to YES to load a screensaver module 219screensave_name="green_saver" # Set to the name of the screensaver module 220 221 222############################################################## 223### Emulation modules ###################################### 224############################################################## 225 226ibcs2_load="NO" # IBCS2 (SCO) emulation 227ibcs2_coff_load="NO" 228linux_load="NO" # Linux emulation 229lindev_load="NO" # Linux-specific pseudo devices (see lindev(4)) 230svr4_load="NO" # SystemV R4 emulation 231streams_load="NO" # System V streams module 232 233 234############################################################## 235### Networking modules ##################################### 236############################################################## 237 238if_disc_load="NO" # Discard device 239if_ef_load="NO" # pseudo-device providing support for multiple 240 # ethernet frame types 241if_epair_load="NO" # Virtual b-t-b Ethernet-like interface pair 242if_faith_load="NO" # IPv6-to-IPv4 TCP relay capturing interface 243if_gif_load="NO" # generic tunnel interface 244if_gre_load="NO" # encapsulating network device 245if_stf_load="NO" # 6to4 tunnel interface 246if_tap_load="NO" # Ethernet tunnel software network interface 247if_tun_load="NO" # Tunnel driver (user process ppp) 248if_vlan_load="NO" # IEEE 802.1Q VLAN network interface 249ipfw_load="NO" # Firewall 250pf_load="NO" # packet filter 251 252 253############################################################## 254### Networking drivers ##################################### 255############################################################## 256 257bridgestp_load="NO" # if_bridge(4) support 258miibus_load="NO" # miibus support, needed for some drivers 259carp_load="NO" # carp(4) protocol 260if_ae_load="NO" # Attansic/Atheros L2 FastEthernet 261if_age_load="NO" # Attansic/Atheros L1 Gigabit Ethernet 262if_alc_load="NO" # Atheros AR8131/AR8132 Ethernet 263if_ale_load="NO" # Atheros AR8121/AR8113/AR8114 Ethernet 264if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs 265if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs 266if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet 267if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet 268if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet 269if_bfe_load="NO" # Broadcom BCM4401 270if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet 271if_bridge_load="NO" # if_bridge(4) devices 272if_bwi_load="NO" # Broadcom BCM53xx IEEE 802.11b/g wireness NICs 273if_bwn_load="NO" # Broadcom BCM43xx IEEE 802.11 wireless NICs 274if_bxe_load="NO" # Broadcom NetXtreme II 10Gb Ethernet 275if_cas_load="NO" # Sun Cassini/Cassini+ and NS DP83065 Saturn 276if_cm_load="NO" # SMC (90c26, 90c56, 90c66) 277if_cs_load="NO" # Crystal Semiconductor CS8920 278if_cue_load="NO" # CATC USB-EL1210A USB Ethernet 279if_cxgb_load="NO" # Chelsio T3 10 Gigabit Ethernet 280if_dc_load="NO" # DEC/Intel 21143 and various workalikes 281if_de_load="NO" # DEC DC21x4x Ethernet 282if_ed_load="NO" # National Semiconductor DS8390/WD83C690 283 # Ethernet 284if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet 285if_en_load="NO" # Midway-based ATM interfaces 286if_ep_load="NO" # 3Com Etherlink III (3c5x9) 287if_et_load="NO" # Agere ET1310 10/100/Gigabit Ethernet 288if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet 289if_fatm_load="NO" # Fore PCA200E ATM 290if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet 291 # adapters 292if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558) 293if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC 294if_hatm_load="NO" # Fore/Marconi HE155 and HE622 295if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet 296if_ie_load="NO" # Intel 82586 297if_igb_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet 298if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless 299if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG 300 # wireless 301if_iwn_load="NO" # Intel Wireless WiFi Link 802.11n wireless 302if_ixgb_load="NO" # Intel PRO/10Gb Ethernet 303if_ixgbe_load="NO" # Intel PRO/10Gb Ethernet PCI Express 304if_jme_load="NO" # JMicron JMC250 Gigabit/JMC260 Fast Ethernet 305if_lagg_load="NO" # lagg(4) devices 306if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet 307if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit 308 # Ethernet 309if_malo_load="NO" # Marvell Libertas 88W8335 802.11 wireless 310 # adapter 311if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet 312if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet 313if_my_load="NO" # Myson PCI Fast Ethernet 314if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter 315if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet 316if_nve_load="NO" # NVIDIA nForce MCP Networking Adapter 317if_nxge_load="NO" # Neterion Xframe 10Gb Ethernet 318if_patm_load="NO" # IDT77252 ATM 319if_pcn_load="NO" # AMD PCnet PCI 320if_ral_load="NO" # Ralink Technology wireless 321if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S 322if_rl_load="NO" # RealTek 8129/8139 323if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet 324if_rum_load="NO" # Ralink Technology USB 802.11a/b/g wireless 325if_run_load="NO" # Ralink Technology USB 802.11a/g/n wireless 326if_sbni_load="NO" # Granch SBNI12 leased line adapters 327if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire") 328if_sge_load="NO" # Silicon Integrated Systems SiS 190/191 329if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016 330if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet 331if_sn_load="NO" # SMC 91Cxx 332if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet 333if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet 334if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2 335if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN") 336if_tx_load="NO" # SMC 83c17x Fast Ethernet 337if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990) 338if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet 339if_vte_load="NO" # DM&P Vortex86 RDC R6040 Fast Ethernet 340if_uath_load="NO" # Atheros USB wireless for AR5005UG & AR5005UX 341if_udav_load="NO" # Davicom DM9601 USB Ethernet 342if_upgt_load="NO" # Conexant/Intersil PrismGT USB wireless 343if_ural_load="NO" # Ralink Technology USB wireless 344if_urtw_load="NO" # Realtek 8187L USB wireless 345if_vr_load="NO" # VIA Rhine I and Rhine II 346if_vx_load="NO" # 3Com 3C590 family 347if_wb_load="NO" # Winbond W89C840F 348if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs 349if_wpi_load="NO" # Intel 3945ABG Wireless LAN IEEE 802.11 350if_xe_load="NO" # Xircom CreditCard PCMCIA 351if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B) 352utopia_load="NO" # ATM PHY driver 353 354############################################################## 355### Netgraph modules ####################################### 356############################################################## 357 358ng_UI_load="NO" # UI netgraph node type 359ng_async_load="NO" # asynchronous framing netgraph node type 360ng_bpf_load="NO" # Berkeley packet filter netgraph node type 361ng_bridge_load="NO" # Ethernet bridging netgraph node type 362ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type 363ng_echo_load="NO" # Netgraph echo node type 364ng_eiface_load="NO" # generic Ethernet interface netgraph node type 365ng_etf_load="NO" # Ethertype filtering netgraph node type 366ng_ether_load="NO" # Ethernet netgraph node type 367ng_fec_load="NO" # netgraph Fast EtherChannel node 368ng_frame_relay_load="NO" # frame relay netgraph node type 369ng_gif_load="NO" # generic tunnel interface netgraph node type 370ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes 371ng_hole_load="NO" # Netgraph discard node type 372ng_hub_load="NO" # packet distribution netgraph node type 373ng_iface_load="NO" # interface Netgraph node type 374ng_ip_input_load="NO" # netgraph IP input node type 375ng_ksocket_load="NO" # kernel socket netgraph node type 376ng_l2tp_load="NO" # L2TP protocol netgraph node type 377ng_lmi_load="NO" # frame relay LMI protocol netgraph node type 378ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and 379 # encryption netgraph node type 380ng_netflow_load="NO" # Cisco's NetFlow netgraph node type 381ng_one2many_load="NO" # packet multiplexing netgraph node type 382ng_ppp_load="NO" # PPP protocol netgraph node type 383ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type 384ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type 385ng_rfc1490_load="NO" # RFC 1490 netgraph node type 386ng_socket_load="NO" # Netgraph socket node type 387ng_split_load="NO" # netgraph node to separate incoming and 388 # outgoing flows 389ng_sppp_load="NO" # sppp netgraph node type 390ng_tee_load="NO" # Netgraph ``tee'' node type 391ng_tty_load="NO" # Netgraph node type that is also a line 392 # discipline 393ng_vjc_load="NO" # Van Jacobsen compression netgraph node type 394ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type 395 396############################################################## 397### Sound modules ########################################## 398############################################################## 399 400sound_load="NO" # Digital sound subsystem 401snd_ad1816_load="NO" # ad1816 402snd_als4000_load="NO" # als4000 403snd_atiixp_load="NO" # atiixp 404snd_cmi_load="NO" # cmi 405snd_cs4281_load="NO" # cs4281 406snd_csa_load="NO" # csa 407snd_ds1_load="NO" # ds1 408snd_emu10k1_load="NO" # Creative Sound Blaster Live 409snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy 410snd_envy24_load="NO" # VIA Envy24 411snd_envy24ht_load="NO" # VIA Envy24HT 412snd_es137x_load="NO" # es137x 413snd_ess_load="NO" # ess 414snd_fm801_load="NO" # fm801 415snd_hda_load="NO" # Intel High Definition Audio (Controller) 416snd_ich_load="NO" # Intel ICH 417snd_maestro_load="NO" # Maestro 418snd_maestro3_load="NO" # Maestro3 419snd_mss_load="NO" # Mss 420snd_neomagic_load="NO" # Neomagic 421snd_sb16_load="NO" # Sound Blaster 16 422snd_sb8_load="NO" # Sound Blaster Pro 423snd_sbc_load="NO" # Sbc 424snd_solo_load="NO" # Solo 425snd_spicds_load="NO" # SPI codecs 426snd_t4dwave_load="NO" # t4dwave 427snd_via8233_load="NO" # via8233 428snd_via82c686_load="NO" # via82c686 429snd_vibes_load="NO" # vibes 430snd_driver_load="NO" # All sound drivers 431 432############################################################## 433### USB modules ############################################ 434############################################################## 435 436usb_load="NO" # USB subsystem 437udbp_load="NO" # USB double bulk pipe host 2 host cables 438ugen_load="NO" # USB generic device, if all else fails ... 439ucycom_load="NO" # Cyprus USB serial adapters 440ufm_load="NO" # Fm Radio 441uhid_load="NO" # Human Interface Devices 442ukbd_load="NO" # Keyboard 443ulpt_load="NO" # Printer 444ums_load="NO" # Mouse 445umass_load="NO" # Mass Storage Devices 446umct_load="NO" # Magic Control Technology USB-RS232 447umodem_load="NO" # Modems 448uplcom_load="NO" # Prolific USB serial adapters 449urio_load="NO" # Rio MP3 players 450uvisor_load="NO" # PalmOS based PDAs 451if_aue_load="NO" # ADMtek USB ethernet 452if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet 453if_cdce_load="NO" # Ethernet over USB (CDC) 454if_cue_load="NO" # CATC USB ethernet 455if_kue_load="NO" # Kawasaki LSI USB ethernet 456if_rae_load="NO" # Realtek RTL8150 USB adapter. 457if_rum_load="NO" # Ralink USB 802.11 wireless adapter 458if_uath_load="NO" # Atheros AR5523 wireless adapter 459if_run_load="NO" # Ralink USB 802.11 wireless adapter 460if_ural_load="NO" # Ralink RT2500USB 802.11 wireless adapter 461if_zyd_load="NO" # ZyDAS ZD1211(B) USB 802.11 wireless adapter 462snd_uaudio_load="NO" # USB audio 463 464############################################################## 465### Other modules ########################################## 466############################################################## 467 468aio_load="NO" # Asynchronous I/O 469bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card 470ispfw_load="NO" # Qlogic ISP Firmware 471agp_load="NO" # agp module 472accf_data_load="NO" # Wait for data accept filter 473accf_dns_load="NO" # Wait for full DNS request accept filter 474accf_http_load="NO" # Wait for full HTTP request accept filter 475ppi_load="NO" # Interface to ppbus parallel 'geek' port 476pps_load="NO" # Pulse per second devices 477puc_load="NO" # PCI "Universal" Communications driver 478random_load="NO" # Random device 479speaker_load="NO" # AT speaker module 480coretemp_load="NO" # Intel Core CPU temperature monitor 481vkbd_load="NO" # Virtual AT keyboard interface 482vpd_load="NO" # Vital Product Data kernel interface 483vpo_load="NO" # Parallel to SCSI interface driver 484amdtemp_load="NO" # AMD K8/K10/K11 temperature monitor 485tpm_load="NO" # Trusted Platform Module 486wbwd_load="NO" # Winbond watchdog 487 488############################################################## 489### ACPI settings ########################################## 490############################################################## 491 492acpi_dsdt_load="NO" # DSDT Overriding 493acpi_dsdt_type="acpi_dsdt" # Don't change this 494acpi_dsdt_name="/boot/acpi_dsdt.aml" 495 # Override DSDT in BIOS by this file 496acpi_video_load="NO" # Load the ACPI video extension driver 497 498############################################################## 499### TrustedBSD MAC settings ################################## 500############################################################## 501 502mac_biba_load="NO" # Biba MAC policy 503mac_bsdextended_load="NO" # BSD/extended MAC policy 504mac_ifoff="NO" # Interface silencing policy 505mac_mls_load="NO" # MLS MAC policy 506mac_none_load="NO" # Null MAC policy 507mac_partition_load="NO" # Partition MAC policy 508mac_seeotheruids_load="NO" # UID visbility MAC policy 509 510############################################################## 511### Module loading syntax example ########################## 512############################################################## 513 514#module_load="YES" # loads module "module" 515#module_name="realname" # uses "realname" instead of "module" 516#module_type="type" # passes "-t type" to load 517#module_flags="flags" # passes "flags" to the module 518#module_before="cmd" # executes "cmd" before loading the module 519#module_after="cmd" # executes "cmd" after loading the module 520#module_error="cmd" # executes "cmd" if load fails 521
