xref: /freebsd-10.2-release/sys/boot/fdt/dts/arm/db78100.dts

/*
 * Copyright (c) 2010 The FreeBSD Foundation
 * All rights reserved.
 *
 * This software was developed by Semihalf under sponsorship from
 * the FreeBSD Foundation.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Marvell DB-78100 Device Tree Source.
 *
 * $FreeBSD: releng/10.2/sys/boot/fdt/dts/arm/db78100.dts 262614 2014-02-28 18:29:09Z imp $
 */

/dts-v1/;

/ {
	model = "mrvl,DB-78100";
	compatible = "DB-78100-BP", "DB-78100-BP-A";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		serial0 = &serial0;
		serial1 = &serial1;
		mpp = &MPP;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "ARM,88FR571";
			reg = <0x0>;
			d-cache-line-size = <32>;	// 32 bytes
			i-cache-line-size = <32>;	// 32 bytes
			d-cache-size = <0x4000>;	// L1, 16K
			i-cache-size = <0x4000>;	// L1, 16K
			timebase-frequency = <0>;
			bus-frequency = <0>;
			clock-frequency = <0>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x0 0x20000000>;		// 512M at 0x0
	};

	localbus@0 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "mrvl,lbc";
		bank-count = <5>;

		/* This reflects CPU decode windows setup. */
		ranges = <0x0 0x2f 0xf9300000 0x00100000
			  0x1 0x3e 0xf9400000 0x00100000
			  0x2 0x3d 0xf9500000 0x02000000
			  0x3 0x3b 0xfb500000 0x00100000>;

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x00100000>;
		};

		led@1,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "led";
			reg = <0x1 0x0 0x00100000>;
		};

		nor@2,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x2 0x0 0x02000000>;
		};

		nand@3,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "mrvl,nfc";
			reg = <0x3 0x0 0x00100000>;
		};
	};

	soc78100@f1000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		ranges = <0x0 0xf1000000 0x00100000>;
		bus-frequency = <0>;

		PIC: pic@20200 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <1>;
			reg = <0x20200 0x3c>;
			compatible = "mrvl,pic";
		};

		timer@20300 {
			compatible = "mrvl,timer";
			reg = <0x20300 0x30>;
			interrupts = <8>;
			interrupt-parent = <&PIC>;
			mrvl,has-wdt;
		};

		MPP: mpp@10000 {
			#pin-cells = <2>;
			compatible = "mrvl,mpp";
			reg = <0x10000 0x34>;
			pin-count = <50>;
			pin-map = <
				0  2		/* MPP[0]:  GE1_TXCLK */
				1  2		/* MPP[1]:  GE1_TXCTL */
				2  2		/* MPP[2]:  GE1_RXCTL */
				3  2		/* MPP[3]:  GE1_RXCLK */
				4  2		/* MPP[4]:  GE1_TXD[0] */
				5  2		/* MPP[5]:  GE1_TXD[1] */
				6  2		/* MPP[6]:  GE1_TXD[2] */
				7  2		/* MPP[7]:  GE1_TXD[3] */
				8  2		/* MPP[8]:  GE1_RXD[0] */
				9  2		/* MPP[9]:  GE1_RXD[1] */
				10 2		/* MPP[10]: GE1_RXD[2] */
				11 2		/* MPP[11]: GE1_RXD[3] */
				13 3		/* MPP[13]: SYSRST_OUTn */
				14 3		/* MPP[14]: SATA1_ACTn */
				15 3		/* MPP[15]: SATA0_ACTn */
				16 4		/* MPP[16]: UA2_TXD */
				17 4		/* MPP[17]: UA2_RXD */
				18 3		/* MPP[18]: <UNKNOWN> */
				19 3		/* MPP[19]: <UNKNOWN> */
				20 3		/* MPP[20]: <UNKNOWN> */
				21 3		/* MPP[21]: <UNKNOWN> */
				22 4		/* MPP[22]: UA3_TXD */
				23 4 >;		/* MPP[21]: UA3_RXD */
		};

		GPIO: gpio@10100 {
			#gpio-cells = <3>;
			compatible = "mrvl,gpio";
			reg = <0x10100 0x20>;
			gpio-controller;
			interrupts = <56 57 58 59>;
			interrupt-parent = <&PIC>;
		};

		rtc@10300 {
			compatible = "mrvl,rtc";
			reg = <0x10300 0x08>;
		};

		twsi@11000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "mrvl,twsi";
			reg = <0x11000 0x20>;
			interrupts = <2>;
			interrupt-parent = <&PIC>;
		};

		twsi@11100 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "mrvl,twsi";
			reg = <0x11100 0x20>;
			interrupts = <3>;
			interrupt-parent = <&PIC>;
		};

		enet0: ethernet@72000 {
			#address-cells = <1>;
			#size-cells = <1>;
			model = "V2";
			compatible = "mrvl,ge";
			reg = <0x72000 0x2000>;
			ranges = <0x0 0x72000 0x2000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <41 42 43 40 70>;
			interrupt-parent = <&PIC>;
			phy-handle = <&phy0>;

			mdio@0 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "mrvl,mdio";

				phy0: ethernet-phy@0 {
					reg = <0x8>;
				};
				phy1: ethernet-phy@1 {
					reg = <0x9>;
				};
			};
		};

		enet1: ethernet@76000 {
			#address-cells = <1>;
			#size-cells = <1>;
			model = "V2";
			compatible = "mrvl,ge";
			reg = <0x76000 0x2000>;
			ranges = <0x0 0x76000 0x2000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <45 46 47 44 70>;
			interrupt-parent = <&PIC>;
			phy-handle = <&phy1>;
		};

		serial0: serial@12000 {
			compatible = "ns16550";
			reg = <0x12000 0x20>;
			reg-shift = <2>;
			clock-frequency = <0>;
			interrupts = <12>;
			interrupt-parent = <&PIC>;
		};

		serial1: serial@12100 {
			compatible = "ns16550";
			reg = <0x12100 0x20>;
			reg-shift = <2>;
			clock-frequency = <0>;
			interrupts = <13>;
			interrupt-parent = <&PIC>;
		};

		usb@50000 {
			compatible = "mrvl,usb-ehci", "usb-ehci";
			reg = <0x50000 0x1000>;
			interrupts = <72 16>;
			interrupt-parent = <&PIC>;
		};

		usb@51000 {
			compatible = "mrvl,usb-ehci", "usb-ehci";
			reg = <0x51000 0x1000>;
			interrupts = <72 17>;
			interrupt-parent = <&PIC>;
		};

		usb@52000 {
			compatible = "mrvl,usb-ehci", "usb-ehci";
			reg = <0x52000 0x1000>;
			interrupts = <72 18>;
			interrupt-parent = <&PIC>;
		};

		xor@60000 {
			compatible = "mrvl,xor";
			reg = <0x60000 0x1000>;
			interrupts = <22 23>;
			interrupt-parent = <&PIC>;
		};

		crypto@90000 {
			compatible = "mrvl,cesa";
			reg = <0x90000 0x10000>;
			interrupts = <19>;
			interrupt-parent = <&PIC>;
		};

		sata@a0000 {
			compatible = "mrvl,sata";
			reg = <0xa0000 0x6000>;
			interrupts = <26>;
			interrupt-parent = <&PIC>;
		};
	};

	pci0: pcie@f1040000 {
		compatible = "mrvl,pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xf1040000 0x2000>;
		bus-range = <0 255>;
		ranges = <0x02000000 0x0 0xf2000000 0xf2000000 0x0 0x04000000
			  0x01000000 0x0 0x00000000 0xf1100000 0x0 0x00100000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&PIC>;
		interrupts = <68>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x1 */
			0x0800 0x0 0x0 0x1 &PIC 0x20
			0x0800 0x0 0x0 0x2 &PIC 0x21
			0x0800 0x0 0x0 0x3 &PIC 0x22
			0x0800 0x0 0x0 0x4 &PIC 0x23
			>;
	};

	sram@fd000000 {
		compatible = "mrvl,cesa-sram";
		reg = <0xfd000000 0x00100000>;
	};

	chosen {
		stdin = "serial0";
		stdout = "serial0";
	};
};