at91sam9g20.c revision 238330
1/*- 2 * Copyright (c) 2005 Olivier Houchard. All rights reserved. 3 * Copyright (c) 2010 Greg Ansley. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27#include <sys/cdefs.h> 28__FBSDID("$FreeBSD: head/sys/arm/at91/at91sam9g20.c 238330 2012-07-10 02:14:50Z imp $"); 29 30#include <sys/param.h> 31#include <sys/systm.h> 32#include <sys/bus.h> 33#include <sys/kernel.h> 34#include <sys/malloc.h> 35#include <sys/module.h> 36 37#define _ARM32_BUS_DMA_PRIVATE 38#include <machine/bus.h> 39 40#include <arm/at91/at91var.h> 41#include <arm/at91/at91_aicreg.h> 42#include <arm/at91/at91sam9g20reg.h> 43#include <arm/at91/at91_pmcreg.h> 44#include <arm/at91/at91_pmcvar.h> 45 46struct at91sam9_softc { 47 device_t dev; 48 bus_space_tag_t sc_st; 49 bus_space_handle_t sc_sh; 50 bus_space_handle_t sc_sys_sh; 51 bus_space_handle_t sc_aic_sh; 52 bus_space_handle_t sc_dbg_sh; 53 bus_space_handle_t sc_matrix_sh; 54}; 55 56/* 57 * Standard priority levels for the system. 0 is lowest and 7 is highest. 58 * These values are the ones Atmel uses for its Linux port 59 */ 60static const int at91_irq_prio[32] = 61{ 62 7, /* Advanced Interrupt Controller */ 63 7, /* System Peripherals */ 64 1, /* Parallel IO Controller A */ 65 1, /* Parallel IO Controller B */ 66 1, /* Parallel IO Controller C */ 67 0, /* Analog-to-Digital Converter */ 68 5, /* USART 0 */ 69 5, /* USART 1 */ 70 5, /* USART 2 */ 71 0, /* Multimedia Card Interface */ 72 2, /* USB Device Port */ 73 6, /* Two-Wire Interface */ 74 5, /* Serial Peripheral Interface 0 */ 75 5, /* Serial Peripheral Interface 1 */ 76 5, /* Serial Synchronous Controller */ 77 0, /* (reserved) */ 78 0, /* (reserved) */ 79 0, /* Timer Counter 0 */ 80 0, /* Timer Counter 1 */ 81 0, /* Timer Counter 2 */ 82 2, /* USB Host port */ 83 3, /* Ethernet */ 84 0, /* Image Sensor Interface */ 85 5, /* USART 3 */ 86 5, /* USART 4 */ 87 5, /* USART 5 */ 88 0, /* Timer Counter 3 */ 89 0, /* Timer Counter 4 */ 90 0, /* Timer Counter 5 */ 91 0, /* Advanced Interrupt Controller IRQ0 */ 92 0, /* Advanced Interrupt Controller IRQ1 */ 93 0, /* Advanced Interrupt Controller IRQ2 */ 94}; 95 96#define DEVICE(_name, _id, _unit) \ 97 { \ 98 _name, _unit, \ 99 AT91SAM9G20_ ## _id ##_BASE, \ 100 AT91SAM9G20_ ## _id ## _SIZE, \ 101 AT91SAM9G20_IRQ_ ## _id \ 102 } 103 104static const struct cpu_devs at91_devs[] = 105{ 106 DEVICE("at91_pmc", PMC, 0), 107 DEVICE("at91_wdt", WDT, 0), 108 DEVICE("at91_rst", RSTC, 0), 109 DEVICE("at91_pit", PIT, 0), 110 DEVICE("at91_pio", PIOA, 0), 111 DEVICE("at91_pio", PIOB, 1), 112 DEVICE("at91_pio", PIOC, 2), 113 DEVICE("at91_twi", TWI, 0), 114 DEVICE("at91_mci", MCI, 0), 115 DEVICE("uart", DBGU, 0), 116 DEVICE("uart", USART0, 1), 117 DEVICE("uart", USART1, 2), 118 DEVICE("uart", USART2, 3), 119 DEVICE("uart", USART3, 4), 120 DEVICE("uart", USART4, 5), 121 DEVICE("uart", USART5, 6), 122 DEVICE("spi", SPI0, 0), 123 DEVICE("spi", SPI1, 1), 124 DEVICE("ate", EMAC, 0), 125 DEVICE("macb", EMAC, 0), 126 DEVICE("nand", NAND, 0), 127 DEVICE("ohci", OHCI, 0), 128 { 0, 0, 0, 0, 0 } 129}; 130 131static void 132at91_add_child(device_t dev, int prio, const char *name, int unit, 133 bus_addr_t addr, bus_size_t size, int irq0, int irq1, int irq2) 134{ 135 device_t kid; 136 struct at91_ivar *ivar; 137 138 kid = device_add_child_ordered(dev, prio, name, unit); 139 if (kid == NULL) { 140 printf("Can't add child %s%d ordered\n", name, unit); 141 return; 142 } 143 ivar = malloc(sizeof(*ivar), M_DEVBUF, M_NOWAIT | M_ZERO); 144 if (ivar == NULL) { 145 device_delete_child(dev, kid); 146 printf("Can't add alloc ivar\n"); 147 return; 148 } 149 device_set_ivars(kid, ivar); 150 resource_list_init(&ivar->resources); 151 if (irq0 != -1) { 152 bus_set_resource(kid, SYS_RES_IRQ, 0, irq0, 1); 153 if (irq0 != AT91SAM9G20_IRQ_SYSTEM) 154 at91_pmc_clock_add(device_get_nameunit(kid), irq0, 0); 155 } 156 if (irq1 != 0) 157 bus_set_resource(kid, SYS_RES_IRQ, 1, irq1, 1); 158 if (irq2 != 0) 159 bus_set_resource(kid, SYS_RES_IRQ, 2, irq2, 1); 160 if (addr != 0 && addr < AT91_BASE) 161 addr += AT91_BASE; 162 if (addr != 0) 163 bus_set_resource(kid, SYS_RES_MEMORY, 0, addr, size); 164} 165 166static void 167at91_cpu_add_builtin_children(device_t dev) 168{ 169 int i; 170 const struct cpu_devs *walker; 171 172 for (i = 1, walker = at91_devs; walker->name; i++, walker++) { 173 at91_add_child(dev, i, walker->name, walker->unit, 174 walker->mem_base, walker->mem_len, walker->irq0, 175 walker->irq1, walker->irq2); 176 } 177} 178 179static uint32_t 180at91_pll_outa(int freq) 181{ 182 183 switch (freq / 10000000) { 184 case 747 ... 801: return ((1 << 29) | (0 << 14)); 185 case 697 ... 746: return ((1 << 29) | (1 << 14)); 186 case 647 ... 696: return ((1 << 29) | (2 << 14)); 187 case 597 ... 646: return ((1 << 29) | (3 << 14)); 188 case 547 ... 596: return ((1 << 29) | (1 << 14)); 189 case 497 ... 546: return ((1 << 29) | (2 << 14)); 190 case 447 ... 496: return ((1 << 29) | (3 << 14)); 191 case 397 ... 446: return ((1 << 29) | (4 << 14)); 192 default: return (1 << 29); 193 } 194} 195 196static uint32_t 197at91_pll_outb(int freq) 198{ 199 200 return (0); 201} 202 203static void 204at91_identify(driver_t *drv, device_t parent) 205{ 206 207 if (at91_cpu_is(AT91_T_SAM9G20)) { 208 at91_add_child(parent, 0, "at91sam", 9, 0, 0, -1, 0, 0); 209 at91_cpu_add_builtin_children(parent); 210 } 211} 212 213static int 214at91_probe(device_t dev) 215{ 216 217 device_set_desc(dev, soc_data.name); 218 return (0); 219} 220 221static int 222at91_attach(device_t dev) 223{ 224 struct at91_pmc_clock *clk; 225 struct at91sam9_softc *sc = device_get_softc(dev); 226 int i; 227 228 struct at91_softc *at91sc = device_get_softc(device_get_parent(dev)); 229 230 sc->sc_st = at91sc->sc_st; 231 sc->sc_sh = at91sc->sc_sh; 232 sc->dev = dev; 233 234 /* 235 * XXX These values work for the RM9200, SAM926[01], and SAM9G20 236 * will have to fix this when we want to support anything else. XXX 237 */ 238 if (bus_space_subregion(sc->sc_st, sc->sc_sh, AT91SAM9G20_SYS_BASE, 239 AT91SAM9G20_SYS_SIZE, &sc->sc_sys_sh) != 0) 240 panic("Enable to map system registers"); 241 242 if (bus_space_subregion(sc->sc_st, sc->sc_sh, AT91SAM9G20_DBGU_BASE, 243 AT91SAM9G20_DBGU_SIZE, &sc->sc_dbg_sh) != 0) 244 panic("Enable to map DBGU registers"); 245 246 if (bus_space_subregion(sc->sc_st, sc->sc_sh, AT91SAM9G20_AIC_BASE, 247 AT91SAM9G20_AIC_SIZE, &sc->sc_aic_sh) != 0) 248 panic("Enable to map system registers"); 249 250 /* XXX Hack to tell atmelarm about the AIC */ 251 at91sc->sc_aic_sh = sc->sc_aic_sh; 252 at91sc->sc_irq_system = AT91SAM9G20_IRQ_SYSTEM; 253 254 for (i = 0; i < 32; i++) { 255 bus_space_write_4(sc->sc_st, sc->sc_aic_sh, IC_SVR + 256 i * 4, i); 257 /* Priority. */ 258 bus_space_write_4(sc->sc_st, sc->sc_aic_sh, IC_SMR + i * 4, 259 at91_irq_prio[i]); 260 if (i < 8) 261 bus_space_write_4(sc->sc_st, sc->sc_aic_sh, IC_EOICR, 262 1); 263 } 264 265 bus_space_write_4(sc->sc_st, sc->sc_aic_sh, IC_SPU, 32); 266 /* No debug. */ 267 bus_space_write_4(sc->sc_st, sc->sc_aic_sh, IC_DCR, 0); 268 /* Disable and clear all interrupts. */ 269 bus_space_write_4(sc->sc_st, sc->sc_aic_sh, IC_IDCR, 0xffffffff); 270 bus_space_write_4(sc->sc_st, sc->sc_aic_sh, IC_ICCR, 0xffffffff); 271 272 /* Disable all interrupts for DBGU */ 273 bus_space_write_4(sc->sc_st, sc->sc_dbg_sh, 0x0c, 0xffffffff); 274 275 if (bus_space_subregion(sc->sc_st, sc->sc_sh, 276 AT91SAM9G20_MATRIX_BASE, AT91SAM9G20_MATRIX_SIZE, 277 &sc->sc_matrix_sh) != 0) 278 panic("Enable to map matrix registers"); 279 280 /* activate NAND*/ 281 i = bus_space_read_4(sc->sc_st, sc->sc_matrix_sh, 282 AT91SAM9G20_EBICSA); 283 bus_space_write_4(sc->sc_st, sc->sc_matrix_sh, 284 AT91SAM9G20_EBICSA, 285 i | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); 286 287 288 /* Update USB device port clock info */ 289 clk = at91_pmc_clock_ref("udpck"); 290 clk->pmc_mask = PMC_SCER_UDP_SAM9; 291 at91_pmc_clock_deref(clk); 292 293 /* Update USB host port clock info */ 294 clk = at91_pmc_clock_ref("uhpck"); 295 clk->pmc_mask = PMC_SCER_UHP_SAM9; 296 at91_pmc_clock_deref(clk); 297 298 /* Each SOC has different PLL contraints */ 299 clk = at91_pmc_clock_ref("plla"); 300 clk->pll_min_in = SAM9G20_PLL_A_MIN_IN_FREQ; /* 2 MHz */ 301 clk->pll_max_in = SAM9G20_PLL_A_MAX_IN_FREQ; /* 32 MHz */ 302 clk->pll_min_out = SAM9G20_PLL_A_MIN_OUT_FREQ; /* 400 MHz */ 303 clk->pll_max_out = SAM9G20_PLL_A_MAX_OUT_FREQ; /* 800 MHz */ 304 clk->pll_mul_shift = SAM9G20_PLL_A_MUL_SHIFT; 305 clk->pll_mul_mask = SAM9G20_PLL_A_MUL_MASK; 306 clk->pll_div_shift = SAM9G20_PLL_A_DIV_SHIFT; 307 clk->pll_div_mask = SAM9G20_PLL_A_DIV_MASK; 308 clk->set_outb = at91_pll_outa; 309 at91_pmc_clock_deref(clk); 310 311 clk = at91_pmc_clock_ref("pllb"); 312 clk->pll_min_in = SAM9G20_PLL_B_MIN_IN_FREQ; /* 2 MHz */ 313 clk->pll_max_in = SAM9G20_PLL_B_MAX_IN_FREQ; /* 32 MHz */ 314 clk->pll_min_out = SAM9G20_PLL_B_MIN_OUT_FREQ; /* 30 MHz */ 315 clk->pll_max_out = SAM9G20_PLL_B_MAX_OUT_FREQ; /* 100 MHz */ 316 clk->pll_mul_shift = SAM9G20_PLL_B_MUL_SHIFT; 317 clk->pll_mul_mask = SAM9G20_PLL_B_MUL_MASK; 318 clk->pll_div_shift = SAM9G20_PLL_B_DIV_SHIFT; 319 clk->pll_div_mask = SAM9G20_PLL_B_DIV_MASK; 320 clk->set_outb = at91_pll_outb; 321 at91_pmc_clock_deref(clk); 322 return (0); 323} 324 325static device_method_t at91_methods[] = { 326 DEVMETHOD(device_probe, at91_probe), 327 DEVMETHOD(device_attach, at91_attach), 328 DEVMETHOD(device_identify, at91_identify), 329 {0, 0}, 330}; 331 332static driver_t at91sam9_driver = { 333 "at91sam", 334 at91_methods, 335 sizeof(struct at91sam9_softc), 336}; 337 338static devclass_t at91sam9_devclass; 339 340DRIVER_MODULE(at91sam, atmelarm, at91sam9_driver, at91sam9_devclass, 0, 0); 341