GENERIC revision 54013
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information on this file, please read the handbook section on 5# Kernel Configuration Files: 6# 7# http://www.freebsd.org/handbook/kernelconfig-config.html 8# 9# The handbook is also available locally in /usr/share/doc/handbook 10# if you've installed the doc distribution, otherwise always see the 11# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the 12# latest information. 13# 14# An exhaustive list of options and more detailed explanations of the 15# device lines is also present in the ./LINT configuration file. If you are 16# in doubt as to the purpose or necessity of a line, check first in LINT. 17# 18# $FreeBSD: head/sys/amd64/conf/GENERIC 54013 1999-12-02 02:53:08Z msmith $ 19 20machine i386 21cpu I386_CPU 22cpu I486_CPU 23cpu I586_CPU 24cpu I686_CPU 25ident GENERIC 26maxusers 32 27 28#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 29 30options MATH_EMULATE #Support for x87 emulation 31options INET #InterNETworking 32options FFS #Berkeley Fast Filesystem 33options FFS_ROOT #FFS usable as root device [keep this!] 34options MD_ROOT #MD is a potential root device 35options MFS #Memory Filesystem 36options NFS #Network Filesystem 37options NFS_ROOT #NFS usable as root device, "NFS" req'ed 38options MSDOSFS #MSDOS Filesystem 39options CD9660 #ISO 9660 Filesystem 40options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed 41options PROCFS #Process filesystem 42options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 43options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 44options UCONSOLE #Allow users to grab the console 45options USERCONFIG #boot -c editor 46options VISUAL_USERCONFIG #visual boot -c editor 47options KTRACE #ktrace(1) syscall trace support 48options SYSVSHM #SYSV-style shared memory 49options SYSVMSG #SYSV-style message queues 50options SYSVSEM #SYSV-style semaphores 51 52# To make an SMP kernel, the next two are needed 53#options SMP # Symmetric MultiProcessor Kernel 54#options APIC_IO # Symmetric (APIC) I/O 55# Optionally these may need tweaked, (defaults shown): 56#options NCPU=2 # number of CPUs 57#options NBUS=4 # number of busses 58#options NAPIC=1 # number of IO APICs 59#options NINTR=24 # number of INTs 60 61controller isa0 62controller pnp0 # PnP support for ISA 63controller eisa0 64controller pci0 65 66# Floppy drives 67controller fdc0 at isa? port IO_FD1 irq 6 drq 2 68device fd0 at fdc0 drive 0 69device fd1 at fdc0 drive 1 70 71# IDE controller and disks 72controller wdc0 at isa? port IO_WD1 irq 14 73device wd0 at wdc0 drive 0 74device wd1 at wdc0 drive 1 75 76controller wdc1 at isa? port IO_WD2 irq 15 77device wd2 at wdc1 drive 0 78device wd3 at wdc1 drive 1 79 80# ATAPI devices on wdc? 81device wcd0 #IDE CD-ROM 82device wfd0 #IDE Floppy (e.g. LS-120) 83device wst0 #IDE Tape (e.g. Travan) 84 85# The 'ATA' driver supports all ATA and ATAPI devices. 86# It can reuse the majors of wd.c for booting purposes. 87# You only need one "controller ata0" for it to find all 88# PCI ATA/ATAPI devices on modern machines. 89#controller ata0 90#device atadisk0 # ATA disk drives 91#device atapicd0 # ATAPI CDROM drives 92#device atapifd0 # ATAPI floppy drives 93#device atapist0 # ATAPI tape drives 94#options ATA_STATIC_ID #Static dev number like old `wd' driver 95#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices 96 97# SCSI Controllers 98# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is 99# sufficient for any number of installed devices. 100controller ahb0 # EISA AHA1742 family 101controller ahc0 # AHA2940 and onboard AIC7xxx devices 102controller amd0 # AMD 53C974 (Teckram DC-390(T)) 103controller dpt0 # DPT Smartcache - See LINT for options! 104controller isp0 # Qlogic family 105controller ncr0 # NCR/Symbios Logic 106#controller sym0 # NCR/Symbios Logic (do not mix with ncr, it conflicts) 107 108controller adv0 at isa? port ? irq ? 109controller adw0 110controller bt0 at isa? port ? irq ? 111controller aha0 at isa? port ? irq ? 112 113# SCSI peripherals 114# Only one of each of these is needed, they are dynamically allocated. 115controller scbus0 # SCSI bus (required) 116device da0 # Direct Access (disks) 117device sa0 # Sequential Access (tape etc) 118device cd0 # CD 119device pass0 # Passthrough device (direct SCSI access) 120 121# RAID controllers 122device amr0 # AMI MegaRAID 123device mlx0 # Mylex DAC960 family 124 125# Proprietary or custom CD-ROM Interfaces 126device wt0 at isa? port 0x300 irq 5 drq 1 127device mcd0 at isa? port 0x300 irq 10 128device matcd0 at isa? port 0x230 129device scd0 at isa? port 0x230 130 131# atkbdc0 controls both the keyboard and the PS/2 mouse 132controller atkbdc0 at isa? port IO_KBD 133device atkbd0 at atkbdc? irq 1 134device psm0 at atkbdc? irq 12 135 136device vga0 at isa? port ? conflicts 137 138# splash screen/screen saver 139pseudo-device splash 140 141# syscons is the default console driver, resembling an SCO console 142device sc0 at isa? 143 144# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver 145#device vt0 at isa? 146#options XSERVER # support for X server 147#options FAT_CURSOR # start with block cursor 148# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines 149#options PCVT_SCANSET=2 # IBM keyboards are non-std 150 151# Floating point support - do not disable. 152device npx0 at nexus? port IO_NPX irq 13 153 154# Power management support (see LINT for more options) 155device apm0 at nexus? disable flags 0x31 # Advanced Power Management 156 157# PCCARD (PCMCIA) support 158#controller card0 159#device pcic0 at isa? 160#device pcic1 at isa? 161 162# Serial (COM) ports 163device sio0 at isa? port IO_COM1 flags 0x10 irq 4 164device sio1 at isa? port IO_COM2 irq 3 165device sio2 at isa? disable port IO_COM3 irq 5 166device sio3 at isa? disable port IO_COM4 irq 9 167 168# Parallel port 169device ppc0 at isa? port? flags 0x40 irq 7 170controller ppbus0 # Parallel port bus (required) 171device lpt0 # Printer 172device plip0 # TCP/IP over parallel 173device ppi0 # Parallel port interface device 174#controller vpo0 # Requires scbus and da0 175 176 177# PCI Ethernet NICs. 178device ax0 # ASIX AX88140A 179device de0 # DEC/Intel DC21x4x (``Tulip'') 180device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) 181device pn0 # Lite-On 82c168/82c169 (``PNIC'') 182device tx0 # SMC 9432TX (83c170 ``EPIC'') 183device vx0 # 3Com 3c590, 3c595 (``Vortex'') 184 185# PCI Ethernet NICs that use the common MII bus controller code. 186controller miibus0 # MII bus support 187device al0 # ADMtek AL981/AN985 (``Comet''/``Centaur'') 188device dm0 # Davicom DM9100/DM9102 189device mx0 # Macronix 98713/98715/98725 (``PMAC'') 190device rl0 # RealTek 8129/8139 191device sf0 # Adaptec AIC-6915 (``Starfire'') 192device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 193device ste0 # Sundance ST201 (D-Link DFE-550TX) 194device tl0 # Texas Instruments ThunderLAN 195device vr0 # VIA Rhine, Rhine II 196device wb0 # Winbond W89C840F 197device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') 198 199# ISA Ethernet NICs. 200device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 201device ex0 at isa? port? irq? 202device ep0 203# The probe order of these is presently determined by i386/isa/isa_compat.c. 204device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 205device fe0 at isa? port 0x300 irq ? 206device le0 at isa? port 0x300 irq 5 iomem 0xd0000 207device lnc0 at isa? port 0x280 irq 10 drq 0 208device cs0 at isa? port 0x300 irq ? 209# requires PCCARD (PCMCIA) support to be activated 210#device xe0 at isa? port? irq ? 211 212# PCCARD NIC drivers. 213# ze and zp take over the pcic and cannot coexist with generic pccard 214# support, nor the ed and ep drivers they replace. 215#device ze0 at isa? port 0x300 irq 10 iomem 0xd8000 216#device zp0 at isa? port 0x300 irq 10 iomem 0xd8000 217 218# Pseudo devices - the number indicates how many units to allocated. 219pseudo-device loop # Network loopback 220pseudo-device ether # Ethernet support 221pseudo-device sl 1 # Kernel SLIP 222pseudo-device ppp 1 # Kernel PPP 223pseudo-device tun # Packet tunnel. 224pseudo-device pty # Pseudo-ttys (telnet etc) 225pseudo-device gzip # Exec gzipped a.out's 226pseudo-device md # Memory "disks" 227 228# The `bpf' pseudo-device enables the Berkeley Packet Filter. 229# Be aware of the administrative consequences of enabling this! 230pseudo-device bpf #Berkeley packet filter 231 232# USB support 233#controller uhci0 # UHCI PCI->USB interface 234#controller ohci0 # OHCI PCI->USB interface 235#controller usb0 # USB Bus (required) 236#device ugen0 # Generic 237#device uhid0 # "Human Interface Devices" 238#device ukbd0 # Keyboard 239#device ulpt0 # Printer 240#controller umass0 # Disks/Mass storage - Requires scbus and da0 241#device ums0 # Mouse 242