Copyright (c) 2005 Bruce M Simpson <bms@FreeBSD.org>
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$FreeBSD: releng/10.2/share/man/man9/pci.9 251723 2013-06-14 01:12:59Z markj $
.Dd March 5, 2012 .Dt PCI 9 .Os .Sh NAME .Nm pci , .Nm pci_alloc_msi , .Nm pci_alloc_msix , .Nm pci_disable_busmaster , .Nm pci_disable_io , .Nm pci_enable_busmaster , .Nm pci_enable_io , .Nm pci_find_bsf , .Nm pci_find_cap , .Nm pci_find_dbsf , .Nm pci_find_device , .Nm pci_find_extcap , .Nm pci_find_htcap , .Nm pci_get_max_read_req , .Nm pci_get_powerstate , .Nm pci_get_vpd_ident , .Nm pci_get_vpd_readonly , .Nm pci_msi_count , .Nm pci_msix_count , .Nm pci_pending_msix , .Nm pci_read_config , .Nm pci_release_msi , .Nm pci_remap_msix , .Nm pci_restore_state , .Nm pci_save_state , .Nm pci_set_max_read_req , .Nm pci_set_powerstate , .Nm pci_write_config .Nd PCI bus interface .Sh SYNOPSIS n sys/bus.h n dev/pci/pcireg.h n dev/pci/pcivar.h .Ft int .Fn pci_alloc_msi "device_t dev" "int *count" .Ft int .Fn pci_alloc_msix "device_t dev" "int *count" .Ft int .Fn pci_disable_busmaster "device_t dev" .Ft int .Fn pci_disable_io "device_t dev" "int space" .Ft int .Fn pci_enable_busmaster "device_t dev" .Ft int .Fn pci_enable_io "device_t dev" "int space" .Ft device_t .Fn pci_find_bsf "uint8_t bus" "uint8_t slot" "uint8_t func" .Ft int .Fn pci_find_cap "device_t dev" "int capability" "int *capreg" .Ft device_t .Fn pci_find_dbsf "uint32_t domain" "uint8_t bus" "uint8_t slot" "uint8_t func" .Ft device_t .Fn pci_find_device "uint16_t vendor" "uint16_t device" .Ft int .Fn pci_find_extcap "device_t dev" "int capability" "int *capreg" .Ft int .Fn pci_find_htcap "device_t dev" "int capability" "int *capreg" .Ft int .Fn pci_get_max_read_req "device_t dev" .Ft int .Fn pci_get_powerstate "device_t dev" .Ft int .Fn pci_get_vpd_ident "device_t dev" "const char **identptr" .Ft int .Fn pci_get_vpd_readonly "device_t dev" "const char *kw" "const char **vptr" .Ft int .Fn pci_msi_count "device_t dev" .Ft int .Fn pci_msix_count "device_t dev" .Ft int .Fn pci_pending_msix "device_t dev" "u_int index" .Ft uint32_t .Fn pci_read_config "device_t dev" "int reg" "int width" .Ft int .Fn pci_release_msi "device_t dev" .Ft int .Fn pci_remap_msix "device_t dev" "int count" "const u_int *vectors" .Ft void .Fn pci_restore_state "device_t dev" .Ft void .Fn pci_save_state "device_t dev" .Ft int .Fn pci_set_max_read_req "device_t dev" "int size" .Ft int .Fn pci_set_powerstate "device_t dev" "int state" .Ft void .Fn pci_write_config "device_t dev" "int reg" "uint32_t val" "int width" .Sh DESCRIPTION The .Nm set of functions are used for managing PCI devices. The functions are split into several groups: raw configuration access, locating devices, device information, device configuration, and message signaled interrupts. .Ss Raw Configuration Access The .Fn pci_read_config function is used to read data from the PCI configuration space of the device .Fa dev , at offset .Fa reg , with .Fa width specifying the size of the access.
p The .Fn pci_write_config function is used to write the value .Fa val to the PCI configuration space of the device .Fa dev , at offset .Fa reg , with .Fa width specifying the size of the access.
p .Em NOTE : Device drivers should only use these functions for functionality that is not available via another .Fn pci function. .Ss Locating Devices The .Fn pci_find_bsf function looks up the .Vt device_t of a PCI device, given its .Fa bus , .Fa slot , and .Fa func . The .Fa slot number actually refers to the number of the device on the bus, which does not necessarily indicate its geographic location in terms of a physical slot. Note that in case the system has multiple PCI domains, the .Fn pci_find_bsf function only searches the first one. Actually, it is equivalent to: d -literal -offset indent pci_find_dbsf(0, bus, slot, func); .Ed
p The .Fn pci_find_dbsf function looks up the .Vt device_t of a PCI device, given its .Fa domain , .Fa bus , .Fa slot , and .Fa func . The .Fa slot number actually refers to the number of the device on the bus, which does not necessarily indicate its geographic location in terms of a physical slot.
p The .Fn pci_find_device function looks up the .Vt device_t of a PCI device, given its .Fa vendor and .Fa device IDs. Note that there can be multiple matches for this search; this function only returns the first matching device. .Ss Device Information The .Fn pci_find_cap function is used to locate the first instance of a PCI capability register set for the device .Fa dev . The capability to locate is specified by ID via .Fa capability . Constant macros of the form .Dv PCIY_xxx for standard capability IDs are defined in n dev/pci/pcireg.h . If the capability is found, then .Fa *capreg is set to the offset in configuration space of the capability register set, and .Fn pci_find_cap returns zero. If the capability is not found or the device does not support capabilities, .Fn pci_find_cap returns an error.
p The .Fn pci_find_extcap function is used to locate the first instance of a PCI-express extended capability register set for the device .Fa dev . The extended capability to locate is specified by ID via .Fa capability . Constant macros of the form .Dv PCIZ_xxx for standard extended capability IDs are defined in n dev/pci/pcireg.h . If the extended capability is found, then .Fa *capreg is set to the offset in configuration space of the extended capability register set, and .Fn pci_find_extcap returns zero. If the extended capability is not found or the device is not a PCI-express device, .Fn pci_find_extcap returns an error.
p The .Fn pci_find_htcap function is used to locate the first instance of a HyperTransport capability register set for the device .Fa dev . The capability to locate is specified by type via .Fa capability . Constant macros of the form .Dv PCIM_HTCAP_xxx for standard HyperTransport capability types are defined in n dev/pci/pcireg.h . If the capability is found, then .Fa *capreg is set to the offset in configuration space of the capability register set, and .Fn pci_find_htcap returns zero. If the capability is not found or the device is not a HyperTransport device, .Fn pci_find_htcap returns an error.
p The .Fn pci_get_vpd_ident function is used to fetch a device's Vital Product Data
q VPD identifier string. If the device .Fa dev supports VPD and provides an identifier string, then .Fa *identptr is set to point at a read-only, null-terminated copy of the identifier string, and .Fn pci_get_vpd_ident returns zero. If the device does not support VPD or does not provide an identifier string, then .Fn pci_get_vpd_ident returns an error.
p The .Fn pci_get_vpd_readonly function is used to fetch the value of a single VPD read-only keyword for the device .Fa dev . The keyword to fetch is identified by the two character string .Fa kw . If the device supports VPD and provides a read-only value for the requested keyword, then .Fa *vptr is set to point at a read-only, null-terminated copy of the value, and .Fn pci_get_vpd_readonly returns zero. If the device does not support VPD or does not provide the requested keyword, then .Fn pci_get_vpd_readonly returns an error. .Ss Device Configuration The .Fn pci_enable_busmaster function enables PCI bus mastering for the device .Fa dev , by setting the .Dv PCIM_CMD_BUSMASTEREN bit in the .Dv PCIR_COMMAND register. The .Fn pci_disable_busmaster function clears this bit.
p The .Fn pci_enable_io function enables memory or I/O port address decoding for the device .Fa dev , by setting the .Dv PCIM_CMD_MEMEN or .Dv PCIM_CMD_PORTEN bit in the .Dv PCIR_COMMAND register appropriately. The .Fn pci_disable_io function clears the appropriate bit. The .Fa space argument specifies which resource is affected; this can be either .Dv SYS_RES_MEMORY or .Dv SYS_RES_IOPORT as appropriate. Device drivers should generally not use these routines directly. The PCI bus will enable decoding automatically when a .Dv SYS_RES_MEMORY or .Dv SYS_RES_IOPORT resource is activated via .Xr bus_alloc_resource 9 or .Xr bus_activate_resource 9 .
p The .Fn pci_get_max_read_req function returns the current maximum read request size in bytes for a PCI-express device. If the .Fa dev device is not a PCI-express device, .Fn pci_get_max_read_req returns zero.
p The .Fn pci_set_max_read_req sets the PCI-express maximum read request size for .Fa dev . The requested .Fa size may be adjusted, and .Fn pci_set_max_read_req returns the actual size set in bytes. If the .Fa dev device is not a PCI-express device, .Fn pci_set_max_read_req returns zero.
p The .Fn pci_get_powerstate function returns the current power state of the device .Fa dev . If the device does not support power management capabilities, then the default state of .Dv PCI_POWERSTATE_D0 is returned. The following power states are defined by PCI: l -hang -width ".Dv PCI_POWERSTATE_UNKNOWN" t Dv PCI_POWERSTATE_D0 State in which device is on and running. It is receiving full power from the system and delivering full functionality to the user. t Dv PCI_POWERSTATE_D1 Class-specific low-power state in which device context may or may not be lost. Busses in this state cannot do anything to the bus, to force devices to lose context. t Dv PCI_POWERSTATE_D2 Class-specific low-power state in which device context may or may not be lost. Attains greater power savings than .Dv PCI_POWERSTATE_D1 . Busses in this state can cause devices to lose some context. Devices .Em must be prepared for the bus to be in this state or higher. t Dv PCI_POWERSTATE_D3 State in which the device is off and not running. Device context is lost, and power from the device can be removed. t Dv PCI_POWERSTATE_UNKNOWN State of the device is unknown. .El
p The .Fn pci_set_powerstate function is used to transition the device .Fa dev to the PCI power state .Fa state . If the device does not support power management capabilities or it does not support the specific power state .Fa state , then the function will fail with .Er EOPNOTSUPP .
p The .Fn pci_save_state and .Fn pci_restore_state functions can be used by a device driver to save and restore standard PCI config registers. The .Fn pci_save_state function must be invoked while the device has valid state before .Fn pci_restore_state can be used. If the device is not in the fully-powered state
q Dv PCI_POWERSTATE_D0 when .Fn pci_restore_state is invoked, then the device will be transitioned to .Dv PCI_POWERSTATE_D0 before any config registers are restored. .Ss Message Signaled Interrupts Message Signaled Interrupts
q MSI and Enhanced Message Signaled Interrupts
q MSI-X are PCI capabilities that provide an alternate method for PCI devices to signal interrupts. The legacy INTx interrupt is available to PCI devices as a .Dv SYS_RES_IRQ resource with a resource ID of zero. MSI and MSI-X interrupts are available to PCI devices as one or more .Dv SYS_RES_IRQ resources with resource IDs greater than zero. A driver must ask the PCI bus to allocate MSI or MSI-X interrupts using .Fn pci_alloc_msi or .Fn pci_alloc_msix before it can use MSI or MSI-X .Dv SYS_RES_IRQ resources. A driver is not allowed to use the legacy INTx .Dv SYS_RES_IRQ resource if MSI or MSI-X interrupts have been allocated, and attempts to allocate MSI or MSI-X interrupts will fail if the driver is currently using the legacy INTx .Dv SYS_RES_IRQ resource. A driver is only allowed to use either MSI or MSI-X, but not both.
p The .Fn pci_msi_count function returns the maximum number of MSI messages supported by the device .Fa dev . If the device does not support MSI, then .Fn pci_msi_count returns zero.
p The .Fn pci_alloc_msi function attempts to allocate .Fa *count MSI messages for the device .Fa dev . The .Fn pci_alloc_msi function may allocate fewer messages than requested for various reasons including requests for more messages than the device .Fa dev supports, or if the system has a shortage of available MSI messages. On success, .Fa *count is set to the number of messages allocated and .Fn pci_alloc_msi returns zero. The .Dv SYS_RES_IRQ resources for the allocated messages will be available at consecutive resource IDs beginning with one. If .Fn pci_alloc_msi is not able to allocate any messages, it returns an error. Note that MSI only supports message counts that are powers of two; requests to allocate a non-power of two count of messages will fail.
p The .Fn pci_release_msi function is used to release any allocated MSI or MSI-X messages back to the system. If any MSI or MSI-X .Dv SYS_RES_IRQ resources are allocated by the driver or have a configured interrupt handler, this function will fail with .Er EBUSY . The .Fn pci_release_msi function returns zero on success and an error on failure.
p The .Fn pci_msix_count function returns the maximum number of MSI-X messages supported by the device .Fa dev . If the device does not support MSI-X, then .Fn pci_msix_count returns zero.
p The .Fn pci_alloc_msix function attempts to allocate .Fa *count MSI-X messages for the device .Fa dev . The .Fn pci_alloc_msix function may allocate fewer messages than requested for various reasons including requests for more messages than the device .Fa dev supports, or if the system has a shortage of available MSI-X messages. On success, .Fa *count is set to the number of messages allocated and .Fn pci_alloc_msix returns zero. For MSI-X messages, the resource ID for each .Dv SYS_RES_IRQ resource identifies the index in the MSI-X table of the corresponding message. A resource ID of one maps to the first index of the MSI-X table; a resource ID two identifies the second index in the table, etc. The .Fn pci_alloc_msix function assigns the .Fa *count messages allocated to the first .Fa *count table indicies. If .Fn pci_alloc_msix is not able to allocate any messages, it returns an error. Unlike MSI, MSI-X does not require message counts that are powers of two.
p The .Fn pci_pending_msix function examines the .Fa dev device's Pending Bit Array
q PBA to determine the pending status of the MSI-X message at table index .Fa index . If the indicated message is pending, this function returns a non-zero value; otherwise, it returns zero. Passing an invalid .Fa index to this function will result in undefined behavior.
p As mentioned in the description of .Fn pci_alloc_msix , MSI-X messages are initially assigned to the first N table entries. A driver may use a different distribution of available messages to table entries via the .Fn pci_remap_msix function. Note that this function must be called after a successful call to .Fn pci_alloc_msix but before any of the .Dv SYS_RES_IRQ resources are allocated. The .Fn pci_remap_msix function returns zero on success, or an error on failure.
p The .Fa vectors array should contain .Fa count message vectors. The array maps directly to the MSI-X table in that the first entry in the array specifies the message used for the first entry in the MSI-X table, the second entry in the array corresponds to the second entry in the MSI-X table, etc. The vector value in each array index can either be zero to indicate that no message should be assigned to the corresponding MSI-X table entry, or it can be a number from one to N
o where N is the count returned from the previous call to .Fn pci_alloc_msix
c to indicate which of the allocated messages should be assigned to the corresponding MSI-X table entry.
p If .Fn pci_remap_msix succeeds, each MSI-X table entry with a non-zero vector will have an associated .Dv SYS_RES_IRQ resource whose resource ID corresponds to the table index as described above for .Fn pci_alloc_msix . MSI-X table entries that with a vector of zero will not have an associated .Dv SYS_RES_IRQ resource. Additionally, if any of the original messages allocated by .Fn pci_alloc_msix are not used in the new distribution of messages in the MSI-X table, they will be released automatically. Note that if a driver wishes to use fewer messages than were allocated by .Fn pci_alloc_msix , the driver must use a single, contiguous range of messages beginning with one in the new distribution. The .Fn pci_remap_msix function will fail if this condition is not met. .Sh IMPLEMENTATION NOTES The .Vt pci_addr_t type varies according to the size of the PCI bus address space on the target architecture. .Sh SEE ALSO .Xr pci 4 , .Xr pciconf 8 , .Xr bus_alloc_resource 9 , .Xr bus_dma 9 , .Xr bus_release_resource 9 , .Xr bus_setup_intr 9 , .Xr bus_teardown_intr 9 , .Xr devclass 9 , .Xr device 9 , .Xr driver 9 , .Xr rman 9 .Rs .%B FreeBSD Developers' Handbook .%T NewBus .%U http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/developers-handbook/ .Re .Rs .%A Shanley .%A Anderson .%B PCI System Architecture .%N 2nd Edition .%I Addison-Wesley .%O ISBN 0-201-30974-2 .Re .Sh AUTHORS This manual page was written by .An Bruce M Simpson Aq bms@FreeBSD.org and .An John Baldwin Aq jhb@FreeBSD.org . .Sh BUGS The kernel PCI code has a number of references to .Dq "slot numbers" . These do not refer to the geographic location of PCI devices, but to the device number assigned by the combination of the PCI IDSEL mechanism and the platform firmware. This should be taken note of when working with the kernel PCI code.