Copyright (c) 2003,2006 Yuriy Tsibizov,
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$Id: snd_emu10kx.4,v 1.19 2006/06/07 11:18:57 chibis Exp $
$FreeBSD: head/share/man/man4/snd_emu10kx.4 165216 2006-12-14 16:40:57Z mpp $
.Dd July 15, 2006 .Dt SND_EMU10KX 4 .Os .Sh NAME .Nm snd_emu10kx .Nd Creative SoundBlaster Live! and Audigy sound cards device driver .Sh SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: d -ragged -offset indent .Cd "device sound" .Cd "device snd_emu10kx"
p For additional options: .Cd "options EMU10KX_MULTICHANNEL" .Cd "options EMU10KX_DEBUG" .Ed
p Alternatively, to load the driver as a module at boot time, place the following line in .Xr loader.conf 5 : d -literal -offset indent snd_emu10kx_load="YES" .Ed .Sh DESCRIPTION The .Nm bridge driver allows the generic audio driver .Xr sound 4 to attach to the Creative sound cards based on EMU10K1, CA0100, CA0101, CA0102 and CA0108 DSPs.
p The .Nm sound cards have a PCM part, which is accessible through one to five .Xr pcm 4 devices (see .Sx MULTICHANNEL PLAYBACK for details), and MPU401-compatible MIDI I/O controller, which is accessible through the midi device. Wave table synthesizer is not supported. .Sh HARDWARE The .Nm driver supports the following sound cards:
p l -bullet -compact t Creative Sound Blaster Live! (EMU10K1 Chipset). Both PCM and MIDI interfaces are available. t Creative Sound Blaster Audigy (CA0100 and CA0101 Chipset). PCM and two MIDI interfaces available. t Creative Sound Blaster Audigy 2 and Creative Sound Blaster Audigy 4 (CA0102 Chipset). PCM support is limited to 48kHz/16 bit stereo (192kHz/24 bit part of this chipset is not supported). t Creative Sound Blaster Audigy 2 Value (CA0108 Chipset). PCM support is limited to 48kHz/16 bit stereo (192kHz/24 bit part of this chipset is not supported). There is no MIDI support for this card. .El
p The .Nm driver does .Em not support the following sound cards (although they are named similar to some supported ones):
p l -bullet -compact t Creative Sound Blaster Live! 24-Bit, identified by .Fx as .Qq Li "emu10k1x Soundblaster Live! 5.1" . t Creative Sound Blaster Audigy LS / ES, identified by .Fx as .Qq Li "CA0106-DAT Audigy LS" . t All other cards with -DAT chipsets. .El .Sh MULTICHANNEL PLAYBACK It is possible to build this driver with multichannel playback capabilities. If you enable the .Dv EMU10KX_MULTICHANNEL option in your kernel configuration (or build it as a module) you will get up to five DSP devices, one for each sound card output. Only .Dq FRONT output can play and record sound from external sources (like line or S/PDIF inputs). .Sh OSS MIXER CONTROLS These are controls available through the standard OSS programming interface. You can use .Xr mixer 8 to change them.
p On EMU10K1-based cards the OSS mixer directly controls the AC97 codec on card. On newer cards the OSS mixer controls some parameters of the AC97 codec and some DSP-based mixer controls. l -inset t Qq vol mixer control is overall sound volume. t Qq pcm mixer control is PCM playback volume. It controls only front output volume in multichannel mode and all output volume in single channel mode. t Qq rec mixer control acts very different on EMU10K1 and other cards. On EMU10K1 cards it controls the AC97 codec recording level. On non-EMU10K1 cards it controls the amount of AC97 "stereo mix" entering the DSP. AC97 recording level and AC97 recording source are fixed on CA0100, CA0101, CA0102 and CA0108 cards. AC97 recording level are always set to maximum and recording source is always .Dq Li "stereo mix" . .El
p Other OSS mixer controls do not work. .Sh PRIVATE DEVICE CONTROLS You can control most of EMU10Kx operation and configuration parameters through .Va dev.emu10kx. Ns Aq Ar X sysctls. These .Xr sysctl 8 values are temporary and should not be relied upon. .Sh DRIVER CONFIGURATION .Ss Kernel Configuration Options The following kernel configuration options control the .Nm driver. l -tag -width ".Dv EMU10KX_MULTICHANNEL" t Dv EMU10KX_MULTICHANNEL This option enables .Sx MULTICHANNEL PLAYBACK for all instances of the .Nm driver. t Dv EMU10KX_DEBUG This option enables additional debug messages. .El .Sh FILES l -tag -width ".Pa /dev/emu10kx?" -compact t Pa /dev/emu10kx? .Nm management interface .El .Sh SEE ALSO .Xr sound 4 .Sh HISTORY The .Nm device driver first appeared in .Fx 7.0 . .Sh AUTHORS .An -nosplit The PCM part of the driver is based on the .Xr snd_emu10k1 4 SB Live! driver by .An "Cameron Grant" . The MIDI interface is based on the .Xr snd_emu10k1 4 MIDI interface code by .An "Mathew Kanner" . The .Nm device driver and this manual page were written by .An Yuriy Tsibizov . .Sh BUGS 8kHz/8bit/mono recording does not work. 8kHz recording was removed from the driver capabilities.
p The driver does not detect lost S/PDIF signal and produces noise when S/PDIF is not connected and S/PDIF volume is not zero.
p The PCM driver cannot detect the presence of Live!Drive or AudigyDrive breakout boxes and tries to use them (and list their connectors in the mixer).
p The MIDI driver cannot detect the presence of Live!Drive or AudigyDrive breakout boxes and tries to enable the IR receiver on them anyway.