All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$FreeBSD: head/share/man/man4/gpioiic.4 258044 2013-11-12 12:44:59Z loos $
.Dd November 5, 2013 .Dt GPIOIIC 4 .Os .Sh NAME .Nm gpioiic .Nd GPIO I2C bit-banging device driver .Sh SYNOPSIS .Cd "device gpio" .Cd "device gpioiic" .Cd "device iic" .Cd "device iicbb" .Cd "device iicbus" .Sh DESCRIPTION The .Em gpioiic driver provides an IIC bit-banging interface using two GPIO pins for the SCL and SDA on the .Em gpiobus . .Nm implements an open colector kind of output, as recommended by the standard, when driving the pins on the .Em gpiobus , i.e, they are never switched to the logical value of '1', or they are '0' or simply open (Hi-Z/tri-state). So the pullup resistors are required so .Nm can work.
p On a hint based system, like .Li MIPS , these values are configureable for the .Nm gpioiic : l -tag -width ".Va hint.gpioiic.%d.atXXX" t Va hint.gpioiic.%d.at The gpiobus you are attaching to. Normally just gpiobus0. t Va hint.gpioiic.%d.pins This is a bitmask of the pins on the .Em gpiobus that are to be used for SCLOCK and SDATA from the GPIO IIC bit-banging bus. To configure pin 0 and 7, use the bitmask of 10000001 and convert it to a hexadecimal value of 0x0081. Please note that this mask should only ever have two bits set (any others bits - i.e., pins - will be ignored). t Va hint.gpioiic.%d.scl Indicates which bit in the .Va hint.gpioiic.%d.pins should be used as the SCLOCK source. t Va hint.gpioiic.%d.sda Indicates which bit in the .Va hint.gpioiic.%d.pins should be used as the SDATA source. .El .Sh SEE ALSO .Xr gpio 4 , .Xr gpioled 4 , .Xr iic 4 , .Xr iicbb 4 , .Xr iicbus 4 .Sh HISTORY The .Nm manual page first appeared in .Fx 11.0 . .Sh AUTHORS This manual page was written by .An Luiz Otavio O Souza .