Copyright (c) 1995, 1996, 1997, 1998, 2000
Justin T. Gibbs. All rights reserved.
Copyright (c) 2002
Scott Long. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
$FreeBSD: head/share/man/man4/ahd.4 102768 2002-09-01 07:34:47Z scottl $
.Dd September 1, 2002 .Dt AHD 4 .Os .Sh NAME .Nm ahd .Nd Adaptec PCI/PCI-X Ultra320 SCSI host adapter driver .Sh SYNOPSIS For one or more PCI/PCI-X cards: .Cd device pci .Cd device ahc
p To compile in debugging code. .Cd options AHD_DEBUG .Cd options AHD_DEBUG_OPTS <bitmask of options> .Cd options AHD_REG_PRETTY_PRINT
p To configure one or more controllers to assume the target role: .Cd options AHC_TMODE_ENABLE <bitmask of units>
p For one or more SCSI busses: .Cd device scbus .Sh DESCRIPTION This driver provides access to the .Tn SCSI bus(es) connected to Adaptec .Tn AIC7901 and .Tn AIC7902 host adapter chips. These chips are found on many motherboards as well as the .Tn 29320 and .Tn 39320 Adaptec SCSI controller cards.
p Driver features include support for narrow and wide busses, fast, ultra, ultra2, ultra160, and ultra320 synchronous transfers, packetized transfers, tagged queueing, 512 SCB's, and target mode.
p The .Dq Dv AHD_DEBUG_OPTS option is used to control which diagnostic messages are printed to the console when .Dq Dv AHD_DEBUG is enabled. Logically 'or' the following bits together:
p d -ragged -offset indent l -column "Value " Function .Em "Value Function" 0x0001 Show miscellanious information 0x0002 Show sense data 0x0004 Show Serial EEPROM contents 0x0008 Show bus termination settings 0x0010 Show host memory usage 0x0020 Show SCSI protocol messages 0x0040 Show mode pointer of the chip register window 0x0080 Show selection timeouts 0x0100 Show FIFO usage messages 0x0200 Show Queue Full status 0x0400 Show SCB queue status 0x0800 Show inbound packet information 0x1000 Show S/G list information 0x2000 Enable extra diagnostic code in the firmware .El .Ed
p The .Dq Dv AHD_REG_PRETTY_PRINT option compiles in support for human-readable bit definitions for each register that is printed by the debugging code. However, it also bloats the compiled size of the driver by approximately 215KB.
p Individual controllers may be configured to operate in the target role through the .Dq Dv AHC_TMODE_ENABLE configuration option. The value assigned to this option should be a bitmap of all units where target mode is desired. For example, a value of 0x25, would enable target mode on units 0, 2, and 5. Note that target mode is only supoprted for ultra160 speeds and below.
p Per target configuration performed in the .Tn SCSI-Select menu, accessible at boot, is honored by this driver. This includes synchronous/asynchronous transfers, maximum synchronous negotiation rate, wide transfers, disconnection, and the host adapter's SCSI ID.
p .Sh SEE ALSO .Xr ahc 4 , .Xr cd 4 , .Xr da 4 , .Xr sa 4 , .Xr scsi 4 .Sh AUTHORS The .Nm driver, the .Tn AIC7xxx sequencer-code assembler, and the firmware running on the aic79xx chips was written by .An Justin T. Gibbs . This manual page is based on the .Xr ahc 4 manual page. .Sh HISTORY The .Nm driver first appeared in .Fx 4.7 .