All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$FreeBSD: releng/10.2/share/man/man4/ae.4 210676 2010-07-31 12:14:28Z joel $
.Dd October 4, 2008 .Dt AE 4 .Os .Sh NAME .Nm ae .Nd "Attansic/Atheros L2 FastEthernet controller driver" .Sh SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: d -ragged -offset indent .Cd "device miibus" .Cd "device ae" .Ed
p Alternatively, to load the driver as a module at boot time, place the following line in .Xr loader.conf 5 : d -literal -offset indent if_ae_load="YES" .Ed .Sh DESCRIPTION The .Nm device driver provides support for Attansic/Atheros L2 PCIe FastEthernet controllers.
p The controller supports hardware Ethernet checksum processing, hardware VLAN tag stripping/insertion and an interrupt moderation mechanism. Attansic L2 also features a 64-bit multicast hash filter.
p The .Nm driver supports the following media types: l -tag -width ".Cm 10baseT/UTP" t Cm autoselect Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to .Xr rc.conf 5 . t Cm 10baseT/UTP Select 10Mbps operation. t Cm 100baseTX Set 100Mbps (FastEthernet) operation. .El
p The .Nm driver provides support for the following media options: l -tag -width ".Cm full-duplex" t Cm full-duplex Force full duplex operation. t Cm half-duplex Force half duplex operation. .El
p For more information on configuring this device, see .Xr ifconfig 8 . .Sh HARDWARE The .Nm driver supports Attansic/Atheros L2 PCIe FastEthernet controllers, and is known to support the following hardware:
p l -bullet -compact t ASUS EeePC 701 t ASUS EeePC 900 .El
p Other hardware may or may not work with this driver. .Sh LOADER TUNABLES Tunables can be set at the .Xr loader 8 prompt before booting the kernel or stored in .Xr loader.conf 5 . l -tag -width "xxxxxx" t Va hw.ae.msi_disable This tunable disables MSI support on the Ethernet hardware. The default value is 0. .El .Sh SYSCTL VARIABLES The .Nm driver collects a number of useful MAC counter during the work. The statistics is available via the .Va dev.ae.%d.stats .Xr sysctl 8 tree, where %d corresponds to the controller number. .Sh DIAGNOSTICS l -diag t "ae%d: watchdog timeout." The device has stopped responding to the network, or there is a problem with the network connection (cable). t "ae%d: reset timeout." The card reset operation has been timed out. t "ae%d: Generating random ethernet address." No valid Ethernet address was found in the controller NVRAM and registers. Random locally administered address with ASUS OUI identifier will be used instead. .El .Sh SEE ALSO .Xr altq 4 , .Xr arp 4 , .Xr miibus 4 , .Xr netintro 4 , .Xr ng_ether 4 , .Xr vlan 4 , .Xr ifconfig 8 .Sh HISTORY The .Nm driver and this manual page was written by .An Stanislav Sedov .Aq stas@FreeBSD.org . It first appeared in .Fx 7.1 . .Sh BUGS The Attansic L2 FastEthernet controller supports DMA but does not use a descriptor based transfer mechanism via scatter-gather DMA. Thus the data should be copied to/from the controller memory on each transmit/receive. Furthermore, a lot of data alignment restrictions apply. This may introduce a high CPU load on systems with heavy network activity. Luckily enough this should not be a problem on modern hardware as L2 does not support speeds faster than 100Mbps.