All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$FreeBSD: releng/10.2/lib/libtacplus/libtacplus.3 250582 2013-05-12 22:22:12Z joel $
.Dd December 11, 2009 .Dt LIBTACPLUS 3 .Os .Sh NAME .Nm libtacplus .Nd TACACS+ client library .Sh SYNOPSIS n taclib.h .Ft int .Fn tac_add_server "struct tac_handle *h" "const char *host" "int port" "const char *secret" "int timeout" "int flags" .Ft void .Fn tac_clear_avs "struct tac_handle *h" .Ft void .Fn tac_close "struct tac_handle *h" .Ft int .Fn tac_config "struct tac_handle *h" "const char *path" .Ft int .Fn tac_create_authen "struct tac_handle *h" "int action" "int type" "int service" .Ft int .Fn tac_create_author "struct tac_handle *h" "int method" "int type" "int service" .Ft int .Fn tac_create_acct "struct tac_handle *h" "int acct" "int action" "int type" "int service" .Ft char * .Fn tac_get_av "struct tac_handle *h" "u_int index" .Ft char * .Fn tac_get_av_value "struct tac_handle *h" "const char *attribute" .Ft void * .Fn tac_get_data "struct tac_handle *h" "size_t *len" .Ft char * .Fn tac_get_msg "struct tac_handle *h" .Ft struct tac_handle * .Fn tac_open "void" .Ft int .Fn tac_send_authen "struct tac_handle *h" .Ft int .Fn tac_send_author "struct tac_handle *h" .Ft int .Fn tac_send_acct "struct tac_handle *h" .Ft int .Fn tac_set_av "struct tac_handle *h" "u_int index" "const char *av_pair" .Ft int .Fn tac_set_data "struct tac_handle *h" "const void *data" "size_t data_len" .Ft int .Fn tac_set_msg "struct tac_handle *h" "const char *msg" .Ft int .Fn tac_set_port "struct tac_handle *h" "const char *port" .Ft int .Fn tac_set_priv "struct tac_handle *h" "int priv" .Ft int .Fn tac_set_rem_addr "struct tac_handle *h" "const char *addr" .Ft int .Fn tac_set_user "struct tac_handle *h" "const char *user" .Ft const char * .Fn tac_strerror "struct tac_handle *h" .Sh DESCRIPTION The .Nm library implements the client side of the TACACS+ network access control protocol. TACACS+ allows clients to perform authentication, authorization, and accounting by means of network requests to remote servers. This library currently supports only the authentication and authorization portion of the protocol. .Sh INITIALIZATION To use the library, an application must first call .Fn tac_open to obtain a .Va struct tac_handle * , which provides context for subsequent operations. Calls to .Fn tac_open always succeed unless insufficient virtual memory is available. If the necessary memory cannot be allocated, .Fn tac_open returns .Dv NULL .
p Before issuing any TACACS+ requests, the library must be made aware of the servers it can contact. The easiest way to configure the library is to call .Fn tac_config . .Fn tac_config causes the library to read a configuration file whose format is described in .Xr tacplus.conf 5 . The pathname of the configuration file is passed as the .Va file argument to .Fn tac_config . This argument may also be given as .Dv NULL , in which case the standard configuration file
a /etc/tacplus.conf is used. .Fn tac_config returns 0 on success, or -1 if an error occurs.
p The library can also be configured programmatically by calls to .Fn tac_add_server . The .Va host parameter specifies the server host, either as a fully qualified domain name or as a dotted-quad IP address in text form. The .Va port parameter specifies the TCP port to contact on the server. If .Va port is given as 0, the library uses port 49, the standard TACACS+ port. The shared secret for the server host is passed to the .Va secret parameter. It may be any null-terminated string of bytes. The timeout for receiving replies from the server is passed to the .Va timeout parameter, in units of seconds. The .Va flags parameter is a bit mask of flags to specify various characteristics of the server. It may contain: l -tag -width Fl t Dv TAC_SRVR_SINGLE_CONNECT Causes the library to attempt to negotiate single connection mode when communicating with the server. In single connection mode, the original TCP connection is held open for multiple TACACS+ sessions. Older servers do not support this mode, and some of them become confused if the client attempts to negotiate it. .El
p .Fn tac_add_server returns 0 on success, or -1 if an error occurs.
p .Fn tac_add_server may be called multiple times, and it may be used together with .Fn tac_config . At most 10 servers may be specified. When multiple servers are given, they are tried in round-robin fashion until a working, accessible server is found. Once the library finds such a server, it continues to use it as long as it works. .Sh CREATING A TACACS+ AUTHENTICATION REQUEST To begin constructing a new authentication request, call .Fn tac_create_authen . The .Va action , .Va type , and .Va service arguments must be set to appropriate values as defined in the TACACS+ protocol specification. The n taclib.h header file contains symbolic constants for these values. .Sh CREATING A TACACS+ AUTHORIZATION REQUEST To begin constructing a new authorization request, call .Fn tac_create_author . The .Va method , .Va type , and .Va service arguments must be set to appropriate values as defined in the TACACS+ protocol specification. The n taclib.h header file contains symbolic constants for these values. .Sh CREATING A TACACS+ ACCOUNTING REQUEST To begin constructing a new accounting request, call .Fn tac_create_acct . The .Va acct , .Va action , .Va type , and .Va service arguments must be set to appropriate values as defined in the TACACS+ protocol specification. The n taclib.h header file contains symbolic constants for these values. .Sh SETTING OPTIONAL PARAMETERS ON A REQUEST After creating a request, various optional parameters may be attached to it through calls to .Fn tac_set_av , .Fn tac_set_data , .Fn tac_set_port , .Fn tac_set_priv , .Fn tac_set_rem_addr , and .Fn tac_set_user . The library creates its own copies of any strings provided to these functions, so that it is not necessary for the caller to preserve them. By default, each of these parameters is empty except for the privilege level, which defaults to .Ql USER privilege.
p .Fn tac_set_av only applies to the context of an authorization request. The format for an attribute value pair is defined in the TACACS+ protocol specification. The index specified can be any value between 0 and 255 inclusive and indicates the position in the list to place the attribute value pair. Calling .Fn tac_set_av with same index twice effectively replaces the value at that position. Use .Fn tac_clear_avs to clear all attribute value pairs that may have been set. .Sh SENDING THE AUTHENTICATION REQUEST AND RECEIVING THE RESPONSE After the TACACS+ authentication request has been constructed, it is sent by means of .Fn tac_send_authen . This function connects to a server if not already connected, sends the request, and waits for a reply. On failure, .Fn tac_send_authen returns -1. Otherwise, it returns the TACACS+ status code and flags, packed into an integer value. The status can be extracted using the macro .Fn TAC_AUTHEN_STATUS . Possible status codes, defined in n taclib.h , include:
p l -item -compact -offset indent t .Dv TAC_AUTHEN_STATUS_PASS t .Dv TAC_AUTHEN_STATUS_FAIL t .Dv TAC_AUTHEN_STATUS_GETDATA t .Dv TAC_AUTHEN_STATUS_GETUSER t .Dv TAC_AUTHEN_STATUS_GETPASS t .Dv TAC_AUTHEN_STATUS_RESTART t .Dv TAC_AUTHEN_STATUS_ERROR t .Dv TAC_AUTHEN_STATUS_FOLLOW .El
p The only flag is the no-echo flag, which can be tested using the macro .Fn TAC_AUTHEN_NOECHO . .Sh EXTRACTING INFORMATION FROM THE SERVER'S AUTHENTICATION RESPONSE An authentication response packet from the server may contain a server message, a data string, or both. After a successful call to .Fn tac_send_authen , this information may be retrieved from the response by calling .Fn tac_get_msg and .Fn tac_get_data . These functions return dynamically-allocated copies of the information from the packet. The caller is responsible for freeing the copies when it no longer needs them. The data returned from these functions is guaranteed to be terminated by a null byte.
p In the case of .Fn tac_get_data , the .Va len argument points to a location into which the library will store the actual length of the received data, not including the null terminator. This argument may be given as .Dv NULL if the caller is not interested in the length. .Sh SENDING AUTHENTICATION CONTINUE PACKETS If .Fn tac_send_authen returns a value containing one of the status codes .Dv TAC_AUTHEN_STATUS_GETDATA , .Dv TAC_AUTHEN_STATUS_GETUSER , or .Dv TAC_AUTHEN_STATUS_GETPASS , then the client must provide additional information to the server by means of a TACACS+ CONTINUE packet. To do so, the application must first set the packet's user message and/or data fields using .Fn tac_set_msg and .Fn tac_set_data . The client then sends the CONTINUE packet with .Fn tac_send_authen . N.B., .Fn tac_create_authen should .Em not be called to construct a CONTINUE packet; it is used only for the initial authentication request.
p When it receives the CONTINUE packet, the server may again request more information by returning .Dv TAC_AUTHEN_STATUS_GETDATA , .Dv TAC_AUTHEN_STATUS_GETUSER , or .Dv TAC_AUTHEN_STATUS_GETPASS . The application should send further CONTINUEs until some other status is received from the server. .Sh SENDING THE AUTHORIZATION REQUEST AND RECEIVING THE RESPONSE After the TACACS+ authorization request has been constructed, it is sent by means of .Fn tac_send_author . This function connects to a server if not already connected, sends the request, and waits for a reply. On failure, .Fn tac_send_author returns -1. Otherwise, it returns the TACACS+ status code and number of attribute value (AV) pairs received packed into an integer value. The status can be extracted using the macro .Fn TAC_AUTHOR_STATUS . Possible status codes, defined in n taclib.h , include:
p l -item -compact -offset indent t .Dv TAC_AUTHOR_STATUS_PASS_ADD t .Dv TAC_AUTHOR_STATUS_PASS_REPL t .Dv TAC_AUTHOR_STATUS_FAIL t .Dv TAC_AUTHOR_STATUS_ERROR .El
p The number of AV pairs received is obtained using .Fn TAC_AUTHEN_AV_COUNT . .Sh SENDING THE ACCOUNTING REQUEST AND RECEIVING THE RESPONSE After the TACACS+ authorization request has been constructed, it is sent by means of .Fn tac_send_acct . This function connects to a server if not already connected, sends the request, and waits for a reply. On failure, .Fn tac_send_acct returns -1. Otherwise, it returns the TACACS+ status code. Possible status codes, defined in n taclib.h , include:
p l -item -compact -offset indent t .Dv TAC_ACCT_STATUS_SUCCESS t .Dv TAC_ACCT_STATUS_ERROR t .Dv TAC_ACCT_STATUS_FOLLOW .El .Sh EXTRACTING INFORMATION FROM THE SERVER'S AUTHORIZATION RESPONSE Like an authentication response packet, an authorization response packet from the server may contain a server message, a data string, or both. Refer to EXTRACTING INFORMATION FROM THE SERVER'S AUTHENTICATION RESPONSE for instruction on extraction of those values.
p An authorization response packet from the server may also contain attribute value (AV) pairs. To extract these, use .Fn tac_get_av or .Fn tac_get_av_value . .Fn tac_get_av takes the index of the AV pair as it is positioned in the list. The indexes start at 0 (use .Fn TAC_AUTHEN_AV_COUNT on the return value of .Fn tac_send_author to get the total number of items in this list). Alternatively, .Fn tac_get_av_value can be used. .Fn tac_get_av_value takes the attribute name and returns the corresponding value only, not the AV pair. These functions return dynamically-allocated copies of the information from the packet. The caller is responsible for freeing the copies when it no longer needs them. The data returned from these functions is guaranteed to be terminated by a null byte. .Sh OBTAINING ERROR MESSAGES Those functions which accept a .Va struct tac_handle * argument record an error message if they fail. The error message can be retrieved by calling .Fn tac_strerror . The message text is overwritten on each new error for the given .Va struct tac_handle * . Thus the message must be copied if it is to be preserved through subsequent library calls using the same handle. .Sh CLEANUP To free the resources used by the TACACS+ library, call .Fn tac_close . .Sh RETURN VALUES The following functions return a non-negative value on success. If they detect an error, they return -1 and record an error message which can be retrieved using .Fn tac_strerror .
p l -item -offset indent -compact t .Fn tac_add_server t .Fn tac_config t .Fn tac_create_authen t .Fn tac_create_author t .Fn tac_create_acct t .Fn tac_send_authen t .Fn tac_send_author t .Fn tac_send_acct t .Fn tac_set_av t .Fn tac_set_data t .Fn tac_set_msg t .Fn tac_set_port t .Fn tac_set_priv t .Fn tac_set_rem_addr t .Fn tac_set_user .El
p The following functions return a .No non- Ns Dv NULL pointer on success. If they are unable to allocate sufficient virtual memory, they return .Dv NULL and record an error message which can be retrieved using .Fn tac_strerror .
p l -item -offset indent -compact t .Fn tac_get_av t .Fn tac_get_av_value t .Fn tac_get_data t .Fn tac_get_msg .El
p The following functions return a .No non- Ns Dv NULL pointer on success. If they are unable to allocate sufficient virtual memory, they return .Dv NULL , without recording an error message.
p l -item -offset indent -compact t .Fn tac_open .El .Sh FILES l -tag -width Pa t Pa /etc/tacplus.conf .El .Sh SEE ALSO .Xr tacplus.conf 5 .Rs .%A D. Carrel .%A Lol Grant .%T The TACACS+ Protocol, Version 1.78 .%O draft-grant-tacacs-02.txt (Internet Draft) .Re .Sh AUTHORS .An -nosplit This software was written by .An John Polstra and .An Paul Fraley , and donated to the .Fx project by Juniper Networks, Inc.