Makefile revision 154501
1# $FreeBSD: head/lib/libarchive/Makefile 154501 2006-01-18 06:26:42Z kientzle $ 2 3# This Makefile is for use with the FreeBSD buid system. For 4# non-FreeBSD systems, you should first "make distfile" on FreeBSD, 5# then use the resulting tar.gz archive--which contains a portable 6# autoconf/automake-generated build system--on the other system. 7 8LIB= archive 9DPADD= ${LIBBZ2} ${LIBZ} 10LDADD= -lbz2 -lz 11 12# Versioning <sigh>. There are three distinct sets of version 13# numbers: 14# * libarchive version 15# * libtool version (for shared libs built using configure script) 16# * FreeBSD SHLIB_MAJOR 17# The following logic helps ensure that there is some consistency across 18# these three: 19 20# First, the libarchive version is in three parts: 21# Bumped ONLY when API/ABI breakage happens (non-backwards-compatible change). 22ARCHIVE_API_MAJOR= 1 23# Bumped when significant new features are added. 24# Also used to bump SHLIB_MAJOR for reasons other than API/ABI breakage. 25# Note: Do NOT reset this to zero after bumping ARCHIVE_API_MAJOR! 26ARCHIVE_API_MINOR= 2 27# Bumped often. ;-) 28ARCHIVE_API_REVISION= 37 29# Full libarchive version combines the above three numbers. 30VERSION= ${ARCHIVE_API_MAJOR}.${ARCHIVE_API_MINOR}.${ARCHIVE_API_REVISION} 31 32# The FreeBSD SHLIB_MAJOR is computed from the above values. 33SHLIB_MAJOR!= echo $$((${ARCHIVE_API_MAJOR} + ${ARCHIVE_API_MINOR})) 34 35# The SHLIB_MAJOR computation above helps ensure that the libtool 36# version (computed in configure.ac.in) provides the same 37# shared library number as is used on FreeBSD. 38 39CFLAGS+= -DPACKAGE_NAME=\"lib${LIB}\" 40CFLAGS+= -DPACKAGE_VERSION=\"${VERSION}\" 41CFLAGS+= -I${.OBJDIR} 42 43# FreeBSD/arm has some limitations. 44.if ${MACHINE_ARCH} == "arm" 45WARNS?= 3 46.else 47WARNS?= 6 48.endif 49 50# Headers to be installed in /usr/include 51INCS= archive.h archive_entry.h 52 53# C sources to be compiled. This is one part of SRCS below. 54BASE_SRCS= archive_check_magic.c \ 55 archive_entry.c \ 56 archive_read.c \ 57 archive_read_data_into_buffer.c \ 58 archive_read_data_into_fd.c \ 59 archive_read_extract.c \ 60 archive_read_open_fd.c \ 61 archive_read_open_file.c \ 62 archive_read_support_compression_all.c \ 63 archive_read_support_compression_bzip2.c \ 64 archive_read_support_compression_compress.c \ 65 archive_read_support_compression_gzip.c \ 66 archive_read_support_compression_none.c \ 67 archive_read_support_format_all.c \ 68 archive_read_support_format_cpio.c \ 69 archive_read_support_format_iso9660.c \ 70 archive_read_support_format_tar.c \ 71 archive_read_support_format_zip.c \ 72 archive_string.c \ 73 archive_string_sprintf.c \ 74 archive_util.c \ 75 archive_write.c \ 76 archive_write_open_fd.c \ 77 archive_write_open_file.c \ 78 archive_write_set_compression_bzip2.c \ 79 archive_write_set_compression_gzip.c \ 80 archive_write_set_compression_none.c \ 81 archive_write_set_format.c \ 82 archive_write_set_format_by_name.c \ 83 archive_write_set_format_cpio.c \ 84 archive_write_set_format_pax.c \ 85 archive_write_set_format_shar.c \ 86 archive_write_set_format_ustar.c 87 88# Note: archive.h does need to be in SRCS, since it is built 89# from archive.h.in. But it does not get included in DIST_FILES 90# below, so I build up SRCS in two steps. 91SRCS= ${BASE_SRCS} archive.h 92 93# Man pages to be installed. 94MAN= archive_entry.3 \ 95 archive_read.3 \ 96 archive_util.3 \ 97 archive_write.3 \ 98 libarchive.3 \ 99 libarchive-formats.5 \ 100 tar.5 101 102# Symlink the man pages under each function name. 103MLINKS+= archive_entry.3 archive_entry_acl_add_entry.3 104MLINKS+= archive_entry.3 archive_entry_acl_add_entry_w.3 105MLINKS+= archive_entry.3 archive_entry_acl_clear.3 106MLINKS+= archive_entry.3 archive_entry_acl_count.3 107MLINKS+= archive_entry.3 archive_entry_acl_next.3 108MLINKS+= archive_entry.3 archive_entry_acl_next_w.3 109MLINKS+= archive_entry.3 archive_entry_acl_reset.3 110MLINKS+= archive_entry.3 archive_entry_acl_text_w.3 111MLINKS+= archive_entry.3 archive_entry_clear.3 112MLINKS+= archive_entry.3 archive_entry_clone.3 113MLINKS+= archive_entry.3 archive_entry_copy_fflags_text_w.3 114MLINKS+= archive_entry.3 archive_entry_copy_gname_w.3 115MLINKS+= archive_entry.3 archive_entry_copy_hardlink_w.3 116MLINKS+= archive_entry.3 archive_entry_copy_pathname_w.3 117MLINKS+= archive_entry.3 archive_entry_copy_stat.3 118MLINKS+= archive_entry.3 archive_entry_copy_symlink_w.3 119MLINKS+= archive_entry.3 archive_entry_copy_uname_w.3 120MLINKS+= archive_entry.3 archive_entry_fflags.3 121MLINKS+= archive_entry.3 archive_entry_fflags_text.3 122MLINKS+= archive_entry.3 archive_entry_free.3 123MLINKS+= archive_entry.3 archive_entry_gid.3 124MLINKS+= archive_entry.3 archive_entry_gname.3 125MLINKS+= archive_entry.3 archive_entry_gname_w.3 126MLINKS+= archive_entry.3 archive_entry_hardlink.3 127MLINKS+= archive_entry.3 archive_entry_ino.3 128MLINKS+= archive_entry.3 archive_entry_mode.3 129MLINKS+= archive_entry.3 archive_entry_mtime.3 130MLINKS+= archive_entry.3 archive_entry_mtime_nsec.3 131MLINKS+= archive_entry.3 archive_entry_new.3 132MLINKS+= archive_entry.3 archive_entry_pathname.3 133MLINKS+= archive_entry.3 archive_entry_pathname_w.3 134MLINKS+= archive_entry.3 archive_entry_rdev.3 135MLINKS+= archive_entry.3 archive_entry_rdevmajor.3 136MLINKS+= archive_entry.3 archive_entry_rdevminor.3 137MLINKS+= archive_entry.3 archive_entry_set_fflags.3 138MLINKS+= archive_entry.3 archive_entry_set_gid.3 139MLINKS+= archive_entry.3 archive_entry_set_gname.3 140MLINKS+= archive_entry.3 archive_entry_set_hardlink.3 141MLINKS+= archive_entry.3 archive_entry_set_link.3 142MLINKS+= archive_entry.3 archive_entry_set_mode.3 143MLINKS+= archive_entry.3 archive_entry_set_pathname.3 144MLINKS+= archive_entry.3 archive_entry_set_rdevmajor.3 145MLINKS+= archive_entry.3 archive_entry_set_rdevminor.3 146MLINKS+= archive_entry.3 archive_entry_set_size.3 147MLINKS+= archive_entry.3 archive_entry_set_symlink.3 148MLINKS+= archive_entry.3 archive_entry_set_uid.3 149MLINKS+= archive_entry.3 archive_entry_set_uname.3 150MLINKS+= archive_entry.3 archive_entry_size.3 151MLINKS+= archive_entry.3 archive_entry_stat.3 152MLINKS+= archive_entry.3 archive_entry_symlink.3 153MLINKS+= archive_entry.3 archive_entry_uid.3 154MLINKS+= archive_entry.3 archive_entry_uname.3 155MLINKS+= archive_entry.3 archive_entry_uname_w.3 156MLINKS+= archive_read.3 archive_read_data.3 157MLINKS+= archive_read.3 archive_read_data_block.3 158MLINKS+= archive_read.3 archive_read_data_into_buffer.3 159MLINKS+= archive_read.3 archive_read_data_into_fd.3 160MLINKS+= archive_read.3 archive_read_data_skip.3 161MLINKS+= archive_read.3 archive_read_extract.3 162MLINKS+= archive_read.3 archive_read_extract_set_progress_callback.3 163MLINKS+= archive_read.3 archive_read_finish.3 164MLINKS+= archive_read.3 archive_read_new.3 165MLINKS+= archive_read.3 archive_read_next_header.3 166MLINKS+= archive_read.3 archive_read_open.3 167MLINKS+= archive_read.3 archive_read_open_fd.3 168MLINKS+= archive_read.3 archive_read_open_file.3 169MLINKS+= archive_read.3 archive_read_set_bytes_per_block.3 170MLINKS+= archive_read.3 archive_read_support_compression_all.3 171MLINKS+= archive_read.3 archive_read_support_compression_bzip2.3 172MLINKS+= archive_read.3 archive_read_support_compression_compress.3 173MLINKS+= archive_read.3 archive_read_support_compression_gzip.3 174MLINKS+= archive_read.3 archive_read_support_compression_none.3 175MLINKS+= archive_read.3 archive_read_support_format_all.3 176MLINKS+= archive_read.3 archive_read_support_format_cpio.3 177MLINKS+= archive_read.3 archive_read_support_format_iso9660.3 178MLINKS+= archive_read.3 archive_read_support_format_tar.3 179MLINKS+= archive_read.3 archive_read_support_format_zip.3 180MLINKS+= archive_util.3 archive_compression.3 181MLINKS+= archive_util.3 archive_compression_name.3 182MLINKS+= archive_util.3 archive_errno.3 183MLINKS+= archive_util.3 archive_error_string.3 184MLINKS+= archive_util.3 archive_format.3 185MLINKS+= archive_util.3 archive_format_name.3 186MLINKS+= archive_util.3 archive_set_error.3 187MLINKS+= archive_write.3 archive_write_data.3 188MLINKS+= archive_write.3 archive_write_finish.3 189MLINKS+= archive_write.3 archive_write_header.3 190MLINKS+= archive_write.3 archive_write_new.3 191MLINKS+= archive_write.3 archive_write_open.3 192MLINKS+= archive_write.3 archive_write_open_fd.3 193MLINKS+= archive_write.3 archive_write_open_file.3 194MLINKS+= archive_write.3 archive_write_prepare.3 195MLINKS+= archive_write.3 archive_write_set_bytes_per_block.3 196MLINKS+= archive_write.3 archive_write_set_bytes_in_last_block.3 197MLINKS+= archive_write.3 archive_write_set_callbacks.3 198MLINKS+= archive_write.3 archive_write_set_compression_bzip2.3 199MLINKS+= archive_write.3 archive_write_set_compression_gzip.3 200MLINKS+= archive_write.3 archive_write_set_format_pax.3 201MLINKS+= archive_write.3 archive_write_set_format_shar.3 202MLINKS+= archive_write.3 archive_write_set_format_ustar.3 203MLINKS+= libarchive.3 archive.3 204 205# Build archive.h from archive.h.in by substituting version information. 206archive.h: archive.h.in Makefile 207 cat ${.CURDIR}/archive.h.in | \ 208 sed 's/@VERSION@/${VERSION}/g' | \ 209 sed 's/@SHLIB_MAJOR@/${SHLIB_MAJOR}/g' | \ 210 sed 's/@ARCHIVE_API_MAJOR@/${ARCHIVE_API_MAJOR}/g' | \ 211 sed 's/@ARCHIVE_API_MINOR@/${ARCHIVE_API_MINOR}/g' | \ 212 sed 's/@ARCHIVE_API_REVISION@/${ARCHIVE_API_REVISION}/g' | \ 213 cat > archive.h 214 215# archive.h needs to be cleaned 216CLEANFILES+= archive.h 217 218# 219# Voodoo for building a distfile that uses autoconf/automake/etc. 220# 221 222# Files that just get copied to the distfile build directory 223DIST_WORK_DIR= ${.OBJDIR}/lib${LIB}-${VERSION} 224CLEANDIRS+= ${DIST_WORK_DIR} 225DISTFILE= lib${LIB}-${VERSION}.tar.gz 226# DIST_FILES is the list of files to include in the distribution. 227DIST_FILES= ${BASE_SRCS} 228DIST_FILES+= ${MAN} 229DIST_FILES+= archive.h.in 230DIST_FILES+= archive_entry.h archive_platform.h 231DIST_FILES+= archive_private.h archive_string.h 232DIST_FILES+= Makefile.am 233 234distfile: 235 rm -rf ${DIST_WORK_DIR} 236 mkdir ${DIST_WORK_DIR} 237 # Copy the DIST_FILES; ignore errors, don't preserve permissions. 238 for f in ${DIST_FILES}; do \ 239 cat ${.CURDIR}/$$f >${DIST_WORK_DIR}/$$f || true; \ 240 done 241 # Build configure.ac from configure.ac.in 242 cat ${.CURDIR}/configure.ac.in | \ 243 sed 's/@VERSION@/${VERSION}/g' | \ 244 sed 's/@SHLIB_MAJOR@/${SHLIB_MAJOR}/g' | \ 245 sed 's/@ARCHIVE_API_MAJOR@/${ARCHIVE_API_MAJOR}/g' | \ 246 sed 's/@ARCHIVE_API_MINOR@/${ARCHIVE_API_MINOR}/g' | \ 247 sed 's/@ARCHIVE_API_REVISION@/${ARCHIVE_API_REVISION}/g' | \ 248 cat > ${DIST_WORK_DIR}/configure.ac 249 # Prepare some auxiliary files. 250 (cd ${DIST_WORK_DIR} && libtoolize) 251 (cd ${DIST_WORK_DIR} && aclocal && autoheader) 252 # Build the configure script and portable Makefile 253 (cd ${DIST_WORK_DIR} && autoconf && automake -a --foreign) 254 # Now, use automake-generated Makefile to build the final dist file. 255 (cd ${DIST_WORK_DIR} && ./configure && make distcheck && make dist) 256 mv ${DIST_WORK_DIR}/${DISTFILE} ${.OBJDIR} 257 @echo ================================================== 258 @echo Created ${.OBJDIR}/${DISTFILE} 259 @echo ================================================== 260 261.include <bsd.lib.mk> 262