rc.conf revision 84780
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 84780 2001-10-10 20:36:51Z jhb $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22swapfile="NO" # Set to name of swapfile if aux swapfile desired. 23apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 24apmd_enable="NO" # Run apmd to handle APM event from userland. 25apmd_flags="" # Flags to apmd (if enabled). 26pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 27pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 28pccard_beep="2" # pccard beep type. 29pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 30pccardd_flags="" # Additional flags for pccardd. 31pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 32pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 33removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 34local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 35script_name_sep=" " # Change if your startup scripts' names contain spaces 36rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 37fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 38background_fsck="YES" # Attempt to run fsck in the background where possible. 39 40############################################################## 41### Network configuration sub-section ###################### 42############################################################## 43 44### Basic network and firewall/security options: ### 45hostname="" # Set this! 46nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 47dhcp_program="/sbin/dhclient" # Path to dhcp client program. 48dhcp_flags="" # Additional flags to pass to dhcp client. 49firewall_enable="NO" # Set to YES to enable firewall functionality 50firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 51firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 52firewall_quiet="NO" # Set to YES to suppress rule display 53firewall_logging="NO" # Set to YES to enable events logging 54firewall_flags="" # Flags passed to ipfw when type is a file 55ip_portrange_first="NO" # Set first dynamically allocated port 56ip_portrange_last="NO" # Set last dynamically allocated port 57ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 58ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 59natd_program="/sbin/natd" # path to natd, if you want a different one. 60natd_enable="NO" # Enable natd (if firewall_enable == YES). 61natd_interface="fxp0" # Public interface or IPaddress to use. 62natd_flags="" # Additional flags for natd. 63ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 64ipfilter_program="/sbin/ipf -Fa -f" 65 # program and how to specify the rules file, 66 # see /etc/rc.network (pass1) for details 67ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 68 # /usr/src/contrib/ipfilter/rules for examples 69ipfilter_flags="-E" # should be *empty* when ipf is _not_ a module 70 # (i.e. compiled into the kernel) to 71 # avoid a warning about "already initialized" 72ipnat_enable="NO" # Set to YES for ipnat; needs ipfilter, too! 73ipnat_program="/sbin/ipnat -CF -f" # program and how to specify rules file 74ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 75ipnat_flags="" # additional flags for ipnat 76ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter, too! 77ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 78ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 79tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 80log_in_vain="NO" # YES to log connects to ports w/o listeners. 81tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 82# For the following two options, you need to have TCP_DROP_SYNFIN and 83# TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details. 84tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 85 # NOTE: this violates the TCP specification 86icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 87icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 88network_interfaces="auto" # List of network interfaces (or "auto"). 89cloned_interfaces="" # List of cloned network interfaces to create. 90#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 91ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 92#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 93#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 94# 95# If you have any sppp(4) interfaces above, you might also want to set 96# the following parameters. Refer to spppcontrol(8) for their meaning. 97sppp_interfaces="" # List of sppp interfaces. 98#sppp_interfaces="isp0" # example: sppp over ISDN 99#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 100gif_interfaces="NO" # List of GIF tunnels (or "NO"). 101#gif_interfaces="gif0 gif1" # Examples typically for a router. 102 # Choose correct tunnel addrs. 103#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 104#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 105 106# User ppp configuration. 107ppp_enable="NO" # Start user-ppp (or NO). 108ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 109 # For details see man page for ppp(8). Default is auto. 110ppp_nat="YES" # Use PPP's internal network address translation or NO. 111ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 112ppp_user="root" # Which user to run ppp as 113 114### Network daemon (miscellaneous) ### 115syslogd_enable="YES" # Run syslog daemon (or NO). 116syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 117syslogd_flags="-s" # Flags to syslogd (if enabled). 118#syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 119inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 120inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 121inetd_flags="-wW" # Optional flags to inetd 122# 123# named. It may be possible to run named in a sandbox, man security for 124# details. 125# 126named_enable="NO" # Run named, the DNS server (or NO). 127named_program="named" # path to named, if you want a different one. 128named_flags="-u bind -g bind" # Flags for named 129 130# 131# kerberos. Do not run the admin daemons on slave servers 132# 133kerberos4_server_enable="NO" # Run a kerberos IV master server (or NO). 134kerberos4_server="/usr/sbin/kerberos" # path to kerberos IV KDC 135kadmind4_server_enable="NO" # Run kadmind (or NO) 136kadmind4_server="/usr/sbin/kadmind" # path to kerberos IV admin daemon 137kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 138kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 139kadmind5_server_enable="NO" # Run kadmind (or NO) 140kadmind5_server="/usr/libexec/k5admind" # path to kerberos 5 admin daemon 141kerberos_stash="" # Is the kerberos master key stashed? 142 143rwhod_enable="NO" # Run the rwho daemon (or NO). 144rwhod_flags="" # Flags for rwhod 145rarpd_enable="NO" # Run rarpd (or NO). 146rarpd_flags="" # Flags to rarpd. 147xtend_enable="NO" # Run the X-10 power controller daemon. 148xtend_flags="" # Flags to xtend (if enabled). 149pppoed_enable="NO" # Run the PPP over Ethernet daemon. 150pppoed_provider="*" # Provider and ppp(8) config file entry. 151pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 152pppoed_interface="fxp0" # The interface that pppoed runs on. 153sshd_enable="NO" # Enable sshd 154sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 155sshd_flags="" # Additional flags for sshd. 156 157### Network daemon (NFS) Need all portmap_enable="YES" ### 158amd_enable="NO" # Run amd service with $amd_flags (or NO). 159amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 160amd_map_program="NO" # Can be set to "ypcat -k amd.master" 161nfs_client_enable="NO" # This host is an NFS client (or NO). 162nfs_access_cache="2" # Client cache timeout in seconds 163nfs_server_enable="NO" # This host is an NFS server (or NO). 164nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 165single_mountd_enable="NO" # Run mountd only (or NO). 166mountd_flags="-r" # Flags to mountd (if NFS server enabled). 167weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 168nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 169nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) 170rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 171rpc_statd_enable="NO" # Run NFS rpc.statd if nfs_server (or NO). 172portmap_enable="NO" # Run the portmapper service (YES/NO). 173portmap_program="/usr/sbin/rpcbind" # path to portmap, if you want a different one. 174portmap_flags="" # Flags to portmap (if enabled). 175rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 176keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 177keyserv_flags="" # Flags to keyserv (if enabled). 178 179### Network Time Services options: ### 180timed_enable="NO" # Run the time daemon (or NO). 181timed_flags="" # Flags to timed (if enabled). 182ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 183ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 184ntpdate_flags="-b" # Flags to ntpdate (if enabled). 185xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 186xntpd_program="ntpd" # path to ntpd, if you want a different one. 187xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 188 189# Network Information Services (NIS) options: Need all portmap_enable="YES" ### 190nis_client_enable="NO" # We're an NIS client (or NO). 191nis_client_flags="" # Flags to ypbind (if enabled). 192nis_ypset_enable="NO" # Run ypset at boot time (or NO). 193nis_ypset_flags="" # Flags to ypset (if enabled). 194nis_server_enable="NO" # We're an NIS server (or NO). 195nis_server_flags="" # Flags to ypserv (if enabled). 196nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 197nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 198nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 199nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 200 201### Network routing options: ### 202defaultrouter="NO" # Set to default gateway (or NO). 203static_routes="" # Set to static route list (or leave empty). 204gateway_enable="NO" # Set to YES if this host will be a gateway. 205router_enable="NO" # Set to YES to enable a routing daemon. 206router="routed" # Name of routing daemon to use if enabled. 207router_flags="-q" # Flags for routing daemon. 208mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 209mrouted_flags="" # Flags for multicast routing daemon. 210ipxgateway_enable="NO" # Set to YES to enable IPX routing. 211ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 212ipxrouted_flags="" # Flags for IPX routing daemon. 213arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 214forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 215accept_sourceroute="NO" # accept source routed packets to us 216 217### ATM interface options: ### 218atm_enable="NO" # Configure ATM interfaces (or NO). 219#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 220#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 221#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 222#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 223#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 224#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 225atm_pvcs="" # Set to PVC list (or leave empty). 226atm_arps="" # Set to permanent ARP list (or leave empty). 227 228### ISDN interface options: (see also: /usr/share/examples/isdn) ### 229isdn_enable="NO" # Enable the ISDN subsystem (or NO). 230isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 231isdn_flags="-dn -d0x1f9" # Flags for isdnd 232isdn_ttype="cons25" # terminal type for fullscreen mode 233isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 234isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 235isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 236 237### Miscellaneous network options: ### 238icmp_bmcastecho="NO" # respond to broadcast ping packets 239 240### IPv6 options: ### 241ipv6_enable="NO" # Set to YES to set up for IPv6. 242ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 243ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 244ipv6_static_routes="" # Set to static route list (or leave empty). 245#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 246 # route toward loopback interface. 247#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 248ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 249ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 250ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 251ipv6_router_flags="" # Flags to IPv6 routing daemon. 252#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 253 # addrs. 254#ipv6_network_interfaces="ed0 ep0" # Examples for router 255 # or static configuration for end node. 256 # Choose correct prefix value. 257#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 258#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 259#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 260#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 261ipv6_default_interface="NO" # Default output interface for scoped addrs. 262 # Now this works only for IPv6 link local 263 # multicast addrs. 264rtadvd_enable="NO" # Set to YES to enable an IPv6 router 265 # advertisement daemon. If set to YES, 266 # this router becomes a possible candidate 267 # IPv6 default router for local subnets. 268rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 269mroute6d_enable="NO" # Do IPv6 multicast routing. 270mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 271 # routing daemon. You need to 272 # install it from package or 273 # port. 274mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 275stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 276 # tunneling interface. Specify this entry 277 # to enable 6to4 interface. 278stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 279 # to limit peer addr range. Effective value 280 # is 0-31. 281stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 282 # If you like, you can set "AUTO" for this. 283stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 284ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 285 # IPv6-to-IPv4 TCP translator. You also need 286 # faithd(8) setup. 287ipv6_ipv4mapping="YES" # Leave empty to disable IPv4 mapped IPv6 addr 288 # communication. (like ::ffff:a.b.c.d) 289ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 290 # functionality 291ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 292ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 293ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 294ipv6_firewall_logging="NO" # Set to YES to enable events logging 295ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 296 297############################################################## 298### System console options ################################# 299############################################################## 300 301keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 302keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 303keybell="NO" # bell to duration.pitch or normal or visual (or NO). 304keychange="NO" # function keys default values (or NO). 305cursor="NO" # cursor type {normal|blink|destructive} (or NO). 306scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 307font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 308font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 309font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 310blanktime="300" # blank time (in seconds) or "NO" to turn it off. 311saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 312moused_enable="NO" # Run the mouse daemon. 313moused_type="auto" # See man page for rc.conf(5) for available settings. 314moused_port="/dev/psm0" # Set to your mouse port. 315moused_flags="" # Any additional flags to moused. 316mousechar_start="NO" # if 0xd0-0xd3 default range is occuped in your 317 # language code table, specify alternative range 318 # start like mousechar_start=3, see vidcontrol(1) 319allscreens_flags="" # Set this vidcontrol mode for all virtual screens 320allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 321 322 323############################################################## 324### Miscellaneous administrative options ################### 325############################################################## 326 327cron_enable="YES" # Run the periodic job daemon. 328cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 329cron_flags="" # Which options to pass to the cron daemon. 330lpd_enable="NO" # Run the line printer daemon. 331lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 332lpd_flags="" # Flags to lpd (if enabled). 333usbd_enable="NO" # Run the usbd daemon. 334usbd_flags="" # Flags to usbd (if enabled). 335sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 336sendmail_flags="-bd -q30m" # Flags to sendmail (as a server) 337sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 338sendmail_outbound_flags="-q30m" # Flags to sendmail (outbound only) 339dumpdev="NO" # Device name to crashdump to (or NO). 340dumpdir="/var/crash" # Directory where crash dumps are to be stored 341savecore_flags="" # Used if dumpdev is enabled above, and present. 342enable_quotas="NO" # turn on quotas on startup (or NO). 343check_quotas="YES" # Check quotas on startup (or NO). 344accounting_enable="NO" # Turn on process accounting (or NO). 345ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 346ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 347sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 348linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 349svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 350osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 351clear_tmp_enable="NO" # Clear /tmp at startup. 352ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 353ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 354 # shared library search paths 355ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 356 # a.out shared library search paths 357kern_securelevel_enable="NO" # kernel security level (see init(8)), 358kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 359update_motd="YES" # update version info in /etc/motd (or NO) 360start_vinum="NO" # set to YES to start vinum 361unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 362entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 363 # /var/db/entropy is preferred if / is not available. 364entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 365entropy_save_sz="2048" # Size of the entropy cache files. 366entropy_save_num="8" # Number of entropy cache files to save. 367harvest_interrupt="YES" # Entropy device harvests interrupt randomness 368harvest_ethernet="YES" # Entropy device harvests ethernet randomness 369harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 370 371############################################################## 372### Define source_rc_confs, the mechanism used by /etc/rc.* ## 373### scripts to source rc_conf_files overrides safely. ## 374############################################################## 375 376if [ -z "${source_rc_confs_defined}" ]; then 377 source_rc_confs_defined=yes 378 source_rc_confs () { 379 local i sourced_files 380 for i in ${rc_conf_files}; do 381 case ${sourced_files} in 382 *:$i:*) 383 ;; 384 *) 385 sourced_files="${sourced_files}:$i:" 386 if [ -r $i ]; then 387 . $i 388 fi 389 ;; 390 esac 391 done 392 } 393fi 394