rc.conf revision 77154
1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: head/etc/defaults/rc.conf 77154 2001-05-25 01:46:39Z obrien $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22swapfile="NO" # Set to name of swapfile if aux swapfile desired. 23apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 24apmd_enable="NO" # Run apmd to handle APM event from userland. 25apmd_flags="" # Flags to apmd (if enabled). 26pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 27pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 28pccard_beep="2" # pccard beep type. 29pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 30pccardd_flags="" # Additional flags for pccardd. 31pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 32removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 33local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 34rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 35fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 36background_fsck="YES" # Attempt to run fsck in the background where possible. 37 38############################################################## 39### Network configuration sub-section ###################### 40############################################################## 41 42### Basic network and firewall/security options: ### 43hostname="" # Set this! 44nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 45dhcp_program="/sbin/dhclient" # Path to dhcp client program. 46dhcp_flags="" # Additional flags to pass to dhcp client. 47firewall_enable="NO" # Set to YES to enable firewall functionality 48firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 49firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 50firewall_quiet="NO" # Set to YES to suppress rule display 51firewall_logging="NO" # Set to YES to enable events logging 52firewall_flags="" # Flags passed to ipfw when type is a file 53ip_portrange_first="NO" # Set first dynamically allocated port 54ip_portrange_last="NO" # Set last dynamically allocated port 55ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 56ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 57natd_program="/sbin/natd" # path to natd, if you want a different one. 58natd_enable="NO" # Enable natd (if firewall_enable == YES). 59natd_interface="fxp0" # Public interface or IPaddress to use. 60natd_flags="" # Additional flags for natd. 61ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 62ipfilter_program="/sbin/ipf -Fa -f" 63 # program and how to specify the rules file, 64 # see /etc/rc.network (pass1) for details 65ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 66 # /usr/src/contrib/ipfilter/rules for examples 67ipfilter_flags="-E" # should be *empty* when ipf is _not_ a module 68 # (i.e. compiled into the kernel) to 69 # avoid a warning about "already initialized" 70ipnat_enable="NO" # Set to YES for ipnat; needs ipfilter, too! 71ipnat_program="/sbin/ipnat -CF -f" # program and how to specify rules file 72ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 73ipnat_flags="" # additional flags for ipnat 74ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter, too! 75ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 76ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 77tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 78log_in_vain="NO" # YES to log connects to ports w/o listeners. 79tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 80# For the following two options, you need to have TCP_DROP_SYNFIN and 81# TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details. 82tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 83 # NOTE: this violates the TCP specification 84icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 85icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 86network_interfaces="auto" # List of network interfaces (or "auto"). 87ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 88#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 89#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 90# 91# If you have any sppp(4) interfaces above, you might also want to set 92# the following parameters. Refer to spppcontrol(8) for their meaning. 93sppp_interfaces="" # List of sppp interfaces. 94#sppp_interfaces="isp0" # example: sppp over ISDN 95#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 96 97# User ppp configuration. 98ppp_enable="NO" # Start user-ppp (or NO). 99ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 100 # For details see man page for ppp(8). Default is auto. 101ppp_nat="YES" # Use PPP's internal network address translation or NO. 102ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 103ppp_user="root" # Which user to run ppp as 104 105### Network daemon (miscellaneous) ### 106syslogd_enable="YES" # Run syslog daemon (or NO). 107syslogd_flags="-s" # Flags to syslogd (if enabled). 108inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 109inetd_flags="-wW" # Optional flags to inetd 110# 111# named. It may be possible to run named in a sandbox, man security for 112# details. 113# 114named_enable="NO" # Run named, the DNS server (or NO). 115named_program="named" # path to named, if you want a different one. 116named_flags="" # Flags for named 117#named_flags="-u bind -g bind" # Flags for named 118 119kerberos_server_enable="NO" # Run a kerberos master server (or NO). 120kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on 121 # a slave kerberos server 122kerberos_stash="" # Is the kerberos master key stashed? 123rwhod_enable="NO" # Run the rwho daemon (or NO). 124rwhod_flags="" # Flags for rwhod 125rarpd_enable="NO" # Run rarpd (or NO). 126rarpd_flags="" # Flags to rarpd. 127xtend_enable="NO" # Run the X-10 power controller daemon. 128xtend_flags="" # Flags to xtend (if enabled). 129pppoed_enable="NO" # Run the PPP over Ethernet daemon. 130pppoed_provider="*" # Provider and ppp(8) config file entry. 131pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 132pppoed_interface="fxp0" # The interface that pppoed runs on. 133sshd_enable="NO" # Enable sshd 134sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 135sshd_flags="" # Additional flags for sshd. 136 137### Network daemon (NFS) Need all portmap_enable="YES" ### 138amd_enable="NO" # Run amd service with $amd_flags (or NO). 139amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 140amd_map_program="NO" # Can be set to "ypcat -k amd.master" 141nfs_client_enable="NO" # This host is an NFS client (or NO). 142nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 143nfs_access_cache="2" # Client cache timeout in seconds 144nfs_server_enable="NO" # This host is an NFS server (or NO). 145nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 146single_mountd_enable="NO" # Run mountd only (or NO). 147mountd_flags="-r" # Flags to mountd (if NFS server enabled). 148weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 149nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 150nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT) 151rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. 152rpc_statd_enable="NO" # Run NFS rpc.statd if nfs_server (or NO). 153portmap_enable="NO" # Run the portmapper service (YES/NO). 154portmap_program="/usr/sbin/rpcbind" # path to portmap, if you want a different one. 155portmap_flags="" # Flags to portmap (if enabled). 156rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 157keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 158keyserv_flags="" # Flags to keyserv (if enabled). 159 160### Network Time Services options: ### 161timed_enable="NO" # Run the time daemon (or NO). 162timed_flags="" # Flags to timed (if enabled). 163ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 164ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. 165ntpdate_flags="-b" # Flags to ntpdate (if enabled). 166xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 167xntpd_program="ntpd" # path to ntpd, if you want a different one. 168xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 169 170# Network Information Services (NIS) options: Need all portmap_enable="YES" ### 171nis_client_enable="NO" # We're an NIS client (or NO). 172nis_client_flags="" # Flags to ypbind (if enabled). 173nis_ypset_enable="NO" # Run ypset at boot time (or NO). 174nis_ypset_flags="" # Flags to ypset (if enabled). 175nis_server_enable="NO" # We're an NIS server (or NO). 176nis_server_flags="" # Flags to ypserv (if enabled). 177nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 178nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 179nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 180nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 181 182### Network routing options: ### 183defaultrouter="NO" # Set to default gateway (or NO). 184static_routes="" # Set to static route list (or leave empty). 185gateway_enable="NO" # Set to YES if this host will be a gateway. 186router_enable="NO" # Set to YES to enable a routing daemon. 187router="routed" # Name of routing daemon to use if enabled. 188router_flags="-q" # Flags for routing daemon. 189mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 190mrouted_flags="" # Flags for multicast routing daemon. 191ipxgateway_enable="NO" # Set to YES to enable IPX routing. 192ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 193ipxrouted_flags="" # Flags for IPX routing daemon. 194arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. 195forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 196accept_sourceroute="NO" # accept source routed packets to us 197 198### ATM interface options: ### 199atm_enable="NO" # Configure ATM interfaces (or NO). 200#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 201#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 202#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 203#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 204#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 205#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 206atm_pvcs="" # Set to PVC list (or leave empty). 207atm_arps="" # Set to permanent ARP list (or leave empty). 208 209### ISDN interface options: ### 210isdn_enable="NO" # Enable the ISDN subsystem (or NO). 211isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). 212isdn_flags="-dn -d0x1f9" # Flags for isdnd 213isdn_ttype="cons25" # terminal type for fullscreen mode 214isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 215isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 216isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 217 218### Miscellaneous network options: ### 219icmp_bmcastecho="NO" # respond to broadcast ping packets 220 221### IPv6 options: ### 222ipv6_enable="NO" # Set to YES to set up for IPv6. 223ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 224ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 225ipv6_static_routes="" # Set to static route list (or leave empty). 226#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 227 # route toward loopback interface. 228#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 229ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 230ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 231ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 232ipv6_router_flags="" # Flags to IPv6 routing daemon. 233#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 234 # addrs. 235#ipv6_network_interfaces="ed0 ep0" # Examples for router 236 # or static configuration for end node. 237 # Choose correct prefix value. 238#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 239#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 240#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 241#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 242ipv6_default_interface="" # Default output interface for scoped addrs. 243 # Now this works only for IPv6 link local 244 # multicast addrs. 245prefixcmd_enable="YES" # Use prefix command to assign router prefix. 246rtadvd_enable="YES" # Set to YES to enable an IPv6 router 247 # advertisement daemon. If set to YES, 248 # this router becomes a possible candidate 249 # IPv6 default router for local subnets. 250rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 251mroute6d_enable="NO" # Do IPv6 multicast routing. 252mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing 253 # daemon. 254mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 255gif_interfaces="NO" # List of GIF tunnels (or "NO"). 256#gif_interfaces="gif0 gif1" # Examples typically for a router. 257 # Choose correct tunnel addrs. 258#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 259#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 260stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 261 # tunneling interface. Specify this entry 262 # to enable 6to4 interface. 263stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 264 # to limit peer addr range. Effective value 265 # is 0-31. 266stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 267 # If you like, you can set "AUTO" for this. 268stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 269ipv6_ipv4mapping="YES" # Leave empty to disable IPv4 mapped IPv6 addr 270 # communication. (like ::ffff:a.b.c.d) 271ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 272 # functionality 273ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 274ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 275ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 276ipv6_firewall_logging="NO" # Set to YES to enable events logging 277ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 278 279############################################################## 280### System console options ################################# 281############################################################## 282 283keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 284keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 285keybell="NO" # bell to duration.pitch or normal or visual (or NO). 286keychange="NO" # function keys default values (or NO). 287cursor="NO" # cursor type {normal|blink|destructive} (or NO). 288scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 289font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 290font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 291font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 292blanktime="300" # blank time (in seconds) or "NO" to turn it off. 293saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 294moused_enable="NO" # Run the mouse daemon. 295moused_type="auto" # See man page for rc.conf(5) for available settings. 296moused_port="/dev/psm0" # Set to your mouse port. 297moused_flags="" # Any additional flags to moused. 298mousechar_start="NO" # if 0xd0-0xd3 default range is occuped in your 299 # language code table, specify alternative range 300 # start like mousechar_start=3, see vidcontrol(1) 301allscreens_flags="" # Set this vidcontrol mode for all virtual screens 302allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 303 304 305############################################################## 306### Miscellaneous administrative options ################### 307############################################################## 308 309cron_enable="YES" # Run the periodic job daemon. 310cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 311cron_flags="" # Which options to pass to the cron daemon. 312lpd_enable="NO" # Run the line printer daemon. 313lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 314lpd_flags="" # Flags to lpd (if enabled). 315usbd_enable="NO" # Run the usbd daemon. 316usbd_flags="" # Flags to usbd (if enabled). 317sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 318sendmail_flags="-bd -q30m" # Flags to sendmail (as a server) 319sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 320sendmail_outbound_flags="-q30m" # Flags to sendmail (outbound only) 321dumpdev="NO" # Device name to crashdump to (or NO). 322savecore_flags="" # Used if dumpdev is enabled above, and present. 323enable_quotas="NO" # turn on quotas on startup (or NO). 324check_quotas="YES" # Check quotas on startup (or NO). 325accounting_enable="NO" # Turn on process accounting (or NO). 326ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 327ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 328sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 329linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 330svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 331osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 332clear_tmp_enable="NO" # Clear /tmp at startup. 333ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 334ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 335 # shared library search paths 336ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 337 # a.out shared library search paths 338kern_securelevel_enable="NO" # kernel security level (see init(8)), 339kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 340update_motd="YES" # update version info in /etc/motd (or NO) 341start_vinum="" # set to YES to start vinum 342unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 343entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 344 # /var/db/entropy is preferred if / is not available. 345entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 346entropy_save_sz="2048" # Size of the entropy cache files. 347entropy_save_num="8" # Number of entropy cache files to save. 348harvest_interrupt="YES" # Entropy device harvests interrupt randomness 349harvest_ethernet="YES" # Entropy device harvests ethernet randomness 350harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness 351 352############################################################## 353### Define source_rc_confs, the mechanism used by /etc/rc.* ## 354### scripts to source rc_conf_files overrides safely. ## 355############################################################## 356 357if [ -z "${source_rc_confs_defined}" ]; then 358 source_rc_confs_defined=yes 359 source_rc_confs () { 360 local i sourced_files 361 for i in ${rc_conf_files}; do 362 case ${sourced_files} in 363 *:$i:*) 364 ;; 365 *) 366 sourced_files="${sourced_files}:$i:" 367 if [ -r $i ]; then 368 . $i 369 fi 370 ;; 371 esac 372 done 373 } 374fi 375